D1.05.03_Dynacoat Clear 5000
Contents
1. Description Mixing ratio Mixing stick Equipment Application Flash off Drying Protection 28 04 2014 Dynacoat Clear 5000 D1 05 13 Dynacoat Clear 5000 is a top class clearcoat that stands out thanks to its excellent flow and a brilliant appearance It is a multi purpose clear and the right choice for small and large repairs Two layers of this high solids product are sufficient for an excellent result Clear 5000 is very easy to apply and to polish Different Dynacoat hardeners and thinners are available to adjust the clear to different application conditions 2 Dynacoat Clear 5000 1 Dynacoat Hardeners 10 20 Dynacoat Thinners Use Dyna measuring stick No 1 Spray gun set up Application pressure 1 2 1 4 mm 2 4 bar see user manual spraygun used 2 xX 1 coat First apply a flowing closed layer Followed by a full flowing layer after indicated flash off time Between coats Before curing 10 15 minutes at 20 C 10 15 minutes at 20 C 20 C 60 C Dynacoat Hardeners 10 12 hours 30 45 minutes Use suitable respiratory protection AkzoNobel Car Refinishes recommends the use of a fresh air supply respirator Read complete technical data sheet for detailed product information Ne AkzoNobel 1 3 Dynacoat Clear 5000 is a top class clearcoat that stands out thanks to its excellent flow and a brilliant appearance It is a multi purpose clear and the right choice for small and la2. ble All advice we give or any statement made about the product by us whether in this data sheet or otherwise is correct to the best of our knowledge but we have no control over the quality or the condition of the substrate or the many factors affecting the use and application of the product Therefore unless we specifically agree in writing otherwise we do not accept any liability whatsoever for the performance of the product or for any loss or damage arising out of the use of the product All products supplied and technical advices given are subject to our standard terms and conditions of sale You should request a copy of this document and review it carefully The information contained in this data sheet is subject to modification from time to time in the light of experience and our policy of continuous development It is the user s responsibility to verify that this data sheet is current prior to using the product Coatings brand names mentioned in this data sheet are trademarks of or are licensed to AkzoNobel Head Office AkzoNobel Car Refinishes B V PO Box 3 2170 BA Sassenheim The Netherlands www dynacoatcr com AkzoNobel 28 04 2014 3 3
3. rge repairs Description Two layers of this high solids product are sufficient for an excellent result Clear 5000 is very easy to apply and to polish Different Dynacoat hardeners and thinners are available to adjust the clear to different application conditions Product and additives Dynacoat Clear 5000 Hardeners Dynacoat Hardener Fast Dynacoat Hardener Medium Dynacoat Hardener Slow Thinners Dynacoat Thinner Fast Dynacoat Thinner Medium Dynacoat Thinner Slow Dynacoat Clear 8000 Thinner Slow Dynacoat Thinner Clear Slow Suitable substrates solventborne Basecoats and hard dry finishes Mixing 2 Dynacoat Clear 5000 1 Dynacoat Hardeners 10 20 Dynacoat Thinners Use measuring stick No 1 Spray gun set up and application pressure 2 0 4 0 bar see user manual spraygun used Apply a flowing closed layer allowing for a 10 15 minutes flash off time at 20 C depends on hardener Next apply a full flowing layer allowing for a 10 15 minutes flash off time at 20 C before bake 2 3 hours at 20 C 4 minutes low power 8 minutes high power Ne AkzoNobel Gravity feed 1 2 1 4 mm Application thinner combination used This time can be greatly influenced by the conditions at the time of application Pot life All Dynacoat Hardeners Drying times 20 C 60 C Dry to handle 10 12 hrs 30 45 min Depends on hardener used Infra Red Dry to handle after 28 04 2014 2 3 Polishability Read
4. y to polish minimum 1 hour after cool down to ambient temperature Film thickness Per coat 25 30 um Recommended application 2 layer 45 60 um Theoretical coverage Ready for use mixture at 1 um layer thickness 338 m2 liter The practical coverage depends on many factors i e shape of the object roughness of the surface application method and application circumstances Cleaning of equipment Use Guncleaner or nitrocellulose thinner Product storage Product shelf life is determined when products are stored unopened at 20 C Avoid extreme temperature fluctuation Shelflife 4 years at 20 C voc The VOC content of this product in ready to use form is 592 g liter RTS mixture AkzoNobel Car Refinish bv Address Rijksstraatweg 31 PO Box 3 2170 BA Sassenheim Tel 31 0 71308 6944 FOR PROFESSIONAL USE ONLY IMPORTANT NOTE The information in this data sheet is not intended to be exhaustive and is based on the present state of our Knowledge and on current laws any person using the product for any purpose other than that specifically recommended in the technical data sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk It is always the responsibility of the user to take all necessary steps to fulfill the demands set out in the local rules and legislation Always read the Material Data Sheet and the Technical Data Sheet for this product if availa
Download Pdf Manuals
Related Search