DVD player - VCR MD 80975 UK.book
Contents
1. OFF The video will play or record all broadcasts in the 4 3 format Only use good quality video cassettes the the VHS logo Keep cassettes away from excessive mosture or dust magnetic and electrical fiels e g loud speakers and computer monitors Always wind the tape to the beginning when you have finished Store with the full spoof at the bottom and with the cassette in its cover You can protext your recordings from being accidentally deleted by breaking out the safety tab on the back of the cassette some cassettes have a slide Should you wish to re use the tape after removing the tab cover the hole with adhesive tape MEDION VCR RECORDING Selecting the recording source To record from the TV gt Select the desired channel with the PR oder number buttons gt If you use a satellite receiver for the TV reception press INPUT to select the satellite receiver and on the remote control of the satellite receiver select the channel To record from the internal DVD player e Please note that copyright gt Insert the desired DVD protected DVD s cannot be copied gt Play the DVD gt Press REC to start the recording If you press STOP in the DVD mode the DVD and VCR will stop at the same time If you press STOP in the VCR mode the VCR will stop recording and the DVD continues to play To record from another device connected to your DVD player VCR Other VCR Decode2. SELEC OK CONFIRM SETUP END SETUP END 15 INITIAL INSTALLATION AND VCR MODE Creating station names MANUAL SET RECEPTION AERIAL AUTOSEARCH CHOI MANUAL SET PR 0 PECEATIC AERIAL CH Setting time and date vv In the menuMANUAL SET select the entry NAME If you want to change the given name press 0 In this case select a name from the stored list using the buttons A V If you want to create a new name press 1 The name must consist of four letters or digits Select a character with the arrow buttons A V Move to the next letter with the arrow buttons lt q gt In the end store with OK ENTER You can exit the menu with SETUP CLOCK SET TIME DATE 0 9 SETUP HOUR CORRECT SETUP END CLOCK SET TIME 06 05 DATE 08 05 2005 SUN 0 9 SETUP HOUR CORRI CORREC OK CONFIRM SETUP END OSD ON and OFF Althouth the clock is set automatically you can also set time and date manually Press SETUP to call up the SETUP menu Select the entry VCR SETUP confirm with OK ENTER then select the entry CLOCK SET and confirm with OK ENTER Move to the entry fields and type in the new values Wait a few seconds after typing a one digit number Store with OK ENTER and exit the SETUP menu with SETUP SETUP gt TIMER PROGRAM PR PRESET VCR SETUP TAPE CONTROL PR SELECT OK CONFIRM SETUP END VCR SETUP CLOCK SET
3. and confirm with OK ENTER The menu TIMER PROGRAM opens gt Type in one after the other the programme location number the starting time of the recording the end time of the recording the date of the broadcast unless it is today TAPE SPEED SP normal recording time or LP double recording time VPS PDC Select OFF if you want to start the recording at the set time regardless of any delays in the programme After typing a one digit number wait a few seconds gt If you wish to make changes move to the position using the arrow buttons lt P Change the setting using the arrow buttons A W or the number buttons gt When all settings are ok press lt or gt until youseeOK CONFIRM in the bottom line gt Press OK ENTER and leave the menu with SETUP gt Switch your DVD player VCR off VCR RECORDING SETUP gt TIMER PROGRAM PR PRESET VCR SETUP TAPE CONTROL PR SELECT OK CONFIRM SETUP END PRe SELECT OK CONFIRM SETUP END HOW OFTEN DO YOU WANT TO RECORD THIS PROGRAM PRe SELECT OK CONFIRM SETUP END TIMER PROGRAM ONCE gt START TIME END TIME START DATE TAPE SPEED SP LECTIAVI AV2 UP PR _ gt CORRECT _SETUP END T Please note If you want to switch on the DVD player VCR before or during a timer recording make sure the unit is not in the VCR mode The recording will fail if the unit is switched into the VCR while a timer recording is
4. A V and make another choice with the arrow buttons lt q P 220 PR If there is no programme location displayed in this line type in the programme location with the number buttons If you wish to record from a satellite receiver select under PR the satellite programm location or AV1 2 depending on the connection with the antenna cable or the SCART cable TAPE SPEED SP normal recording time or LP double recording time VPS PDC Select OFF if you want to start the recording at the set time regardless of any delays in the programme SETUP END e The VPS dominates any manual time setting When VPS is activated the recording will start and stop at the time which is transmitted by the broadcasting station If the recording should overlap with another recording you will get a warning OVERLAPI VIDEOPLUS is a trademark applied for by Gemstar Development Corp the VIDEOPLUS system is manufactured under license from Gemstar Development Corporation 20 MEDION After finishing the timer programming a screen message INSERT A CASSETTE and TURN VCR OFF appears gt Switch your DVD player VCR off Normal timer recording gt Call up the SETUP menu by pressing SETUP gt Select TIMER PROGRAM and confirm with OK ENTER The menu TIMER PROGRAM appears gt Select a free line in the schedule and press OK ENTER gt The menu HOW OFTEN appears gt Select the frequency 0nce Weekly etc
5. AE on the disc goes to the digital audio output LPCM Select LPCM if there is a connection to a digital amplifier receiver Your DVD player VCR will transmit the decoded audio signal to the digital audio output DYNAMIC RANGE Full You will hear the loud sounds softer and soft sounds louder Off You will hear the sound as it was originally recorded on the disc The menu Others OSD On The OSD which accompanies some button controls e g REWIND and FAST FORWARD appears on the screen Off This OSD does not appear on the screen when the button is pressed This does not affect such controls where the OSD is necessary for the controls which will alway appear Screen Saver On After five minutes in the stop mode or pause mode the screen saver a moving DVD logo will turn on in order to prevent the DEFAULTS screen from being damaged a PANTAL Off The screen saver will not be turned on DVD PLAYER VCR MD 80975 35 SETTINGS IN THE DVD SETUP MENU f OSD o SCREEN SAVER F T P Ape you sue 7 ye OSD e SCOREN SAVER T RESET P Are you sure 7 36 Defaults Reset You can reset the device to the factory settings here To do so confirm the entry RESET with OK ENTER An Are you sure message comes up Confirm OK with OK ENTER Please note that individual parental control setting see next chapter and the password will not be reset Parental Some DVDs and CDs are co
6. Press repeatedly to reduce the speed 1 2 x gt 1 4 x gt 1 8 x gt 1 32 x Press PLAY PAUSE again to return to normal speed gt VCD will reduce the speed 1 2 x gt 1 4 x gt 1 8 x Some VCD s will not search in slow reverse Skip DvD veo sve cb mes gt To move to the next chapter or track press NEXT gt gt To skip to the beginning of the current chapter or track or to the previous chapter track press PREV med When trying to activate a function which is not available in the current mode or does not exist on the disc a message as depicted here appears The message disappears after a few seconds 26 MEDION Direct search of DVD with the number buttons pvp You can search a title number a chapter number or a time directly gt To search a title number press the button SEARCH once The entry field shows the current title number and the total number of titles gt Enter the desired title number using the number buttons and confirm with OK ENTER gt To search a chapter number press the button SEARCH twice The entry field shows the current chapter number and the total nuber of chapters gt Enter the desired chapter number using the number buttons and confirm with OK ENTER gt To search atime press the button SEARCH three times The entry field shows the current time gt Enter the desired time using the number buttons and confirm with OK ENTER Direct search of VCD with the number
7. TO ZERO and confirm with OK ENTER The cassette will automatically rewind to the zero position and then stop Counter reset gt Inthe menu TAPE CONTROL select COUNTER RESET and confirm with OK ENTER The current position of the cassette will be set to 0 00 00 Finding the index marks When you record a programme the VCR places an index mark at the start of the recording gt Inthe menu TAPE CONTROL select INDEX or INDEX and confirm with OK ENTER INDEX searches forward INDEX searches backwards on the tape The VCR will search forward or backwards and start playback at the next index mark The unit will search all index marks successively When the search has found the mark where you wish to start the playback press PLAY The VCR Hi Fi sound system VCR RECORDING 0 02 13 COUNTER RESET 0 00 00 TAPE CONTROL TAPE REMAIN GO TO ZERO COUNTER RESET gt INDEX INDEX PR SELECT OK CONFHRM SETUP END The DVD player VCR records the complete sound signal transmitted by the TV station In addition to the normal mono sound track of VHS video recorders your DVD player VCR is equipped with a high quality Hi Fi sound system This means you can enjoy stereo sound surround sound and two dialogue modes dual bilingual usually with the original sound track and dubbed sound track Displaying the sound mode In the stop mode of a tape playback the DVD player VCR displays the sound mode of the current b
8. VCR can receive VPS PDC signals e VPS PDC is a service provided by some stations to enable you to I perform timer recordings precisely even if the broadcaster delays the start time of the programm Not all stations offer VPS PDC in which case the DVD player VCR will start at the time you enter and not at the actual starting time of the programme For a scheduled recording clock date and stations must be set correctly Load a cassette with its safety tab in place If the safety tab is removed the recorder will eject the cassette If there is not sufficient free space for the recording on the cassette the video switches automatically to LP for double recording speed Timer recording using VideoPlus VID EOPLUS You will find the VideoPlus numbers in you TV magazine 831 gt In the VCR mode call up the VideoPlus menu by pressing the button PROGRAM on the remote control gt From your TV magazine type in the number next to the programme you want to record gt If you mistype a number press the arrow button lt to clear gt Confirm with OK ENTER The menu HOW OFTEN appears gt Select the frequency Once Weekly etc and confirm with OK ENTER The menu TIMER PROGRAM opens The TIMER PROGRAM menu shows the time and date matching the entered VideoPlus number gt To make changes in menu select the entry using the arrow buttons pp T MER PROGRAM ONCE
9. gt Press the button AUDIO repeatedly to select another language that is available on the DVD The change is made immediately and does not need to be confirmed During zoom mode the subtitles cannot be seen Sound output Ve gt With VCD s press the button AUDIO repeatedly to select different sound outputs The sound toggles between STEREO L MONO monaural sound on the left speaker and R MONO monaural sound on the right speaker DVD PLAYER VCR MD 80975 29 Disc OPERATION fa ENG 0101 Displaying and editing Subtitle language gt Press SUBTITLE repeatedly to select another subtitle language that is available on the DVD The change is made immediately and does not need to be confirmed 3D Audio gt The function 3D AUDIO provides a virtual 3D sound effect from 2 channel sources gt Press the button 3D repeatedly to toggle between the 3D ON and 3D OFF the current status 30 You can open the display menu which shows the current time status and the current settings with the button DISPLAY Display with DVD s DvD gt Press DISPLAY in playback mode The display menu opens current title total title 001 023 current chapter total chapter 00 01 03 time elapsed ENG 01 01 subtitle selected current subtitle total subtitle ENG 01 03 000 audio language selected current total audio language OFF repeat playback mode 01 01 current angle total angle gt Select the en
10. has been pressed or stops again immediately Wrong language Wrong subtitle language SKIP function does not work The camera angle cannot be changed You have forgotten the password VCR RELATED PROBLEMS No recording on cassette VCR playback produces a very snowy picture Disposal Packaging All packaging and packaging materials that are no longer required can and should be recycled Device TROUBLESHOOTING Is the disc inserted with the title facing upwards Check whether the disc has been damaged by trying another disc If the disc is dirty clean it carefully wiping it from the centre to the edge with a soft dry cloth Have you inserted a type of disc that can not be played For commercial DVDs Does the DVD have the correct regional code 2 If condensation has formed give the recorder one to two hours to dry off Change the language setting in the SETUP menu LANGUAGE SUBTITLES via the SUBTITLE key or in the DVD menu MENU or TITLEkey Check on the DVD cover or DVD menu whether the selected language is actually on the DVD Some DVDs disable the SKIP function for certain titles or chapters Only a few discs allow camera angles to be selected and usually only for selected scenes on any one DVD Use the factory password 3308 The recording protection tab on the cassette has been removed Either use a different cassette or cover the record protection slot with a piece of adhesive tape The video he
11. option Others Here you can enter a four digit code for less wide spread languages E ime sen af You will find the list of the codes on page 37of the manual Of course you can change the setting for the current DVD during playback OSD Sry using the AUDIO or DISPLAY buttons AUDIO GERMAN E ITAUAN Ao Dsc MENU DUTCH S U BTITLE RUSSIAN T gt Select the default setting for the subtitle language here Off No subtitles are displayed Others See above Of course you can change the setting for the current DVD during playback using the SUBTITLE or DISPLAY buttons 34 MEDION SETTINGS IN THE DVD SETUP MENU DISC MENU SPANISH gt Select the default setting for the DVD menu language here a SUBTIE MALAN Auto The first language on the disc will be displayed a Ros TUKARAN Others See above 4 aO ov gt senp The menu Video TV ASPECT 4 3 LB Select this setting to display a film in 16 9 format on a traditional TV with a 4 3 format The image is shown with a black bar at the lower and upper edges 4 3 Pan Scan Select this setting to display a program in the usual 4 3 format on a 4 3 format TV Programs in 16 9 format are shown at full size without a bar but the edges of the images are cut 16 9 Wide Select this option to output to a wide screen television in 16 9 format The menu Audio DIGITAL OUT Bitstream The DVD player VCR outputs the raw audio signal recorded T
12. power socket is easily accessible Only connect the unit to a power socket 200 240 V 50 60 Hz that is easy to reach and is close to the place where you have set the unit up The power socket must be freely accessible so that you can unplug the device quickly if you should need to To avoid the risk of tripping please avoid using extension cables 4 MEDION Never do your own repairs If the plug cable or device is damaged pull the plug out of the socket immediately Do not use the device if the mains plug mains cable or unit itself is damaged Do not insert any objects into the device e g through the ventilation slots They could touch parts that carry current or damage the components in the device Unplug the device from the mains using the plug Never pull on the cable Never try to open and or repair the device yourself There is a risk of electric shock If there is a defect contact our Service Centre or other suitable specialist workshop service Storms Pull the plug and antenna cable out of the mains if you are away for along period or if there is a storm Laser class The DVD player is a Class 1 laser product The device has a safety system that prevents dangerous laser rays escaping during normal use In order to avoid injury to the eyes never manipulate or damage the unit s security system Cleaning the unit Before cleaning pull the plug out of the mains socket Use a dry soft cloth to clean the
13. time does not appear Auto repeat gt To turn on the auto repeat function press the PLAY button for five seconds during stop or still mode The DVD player VCR will then repeatedly play the tape from beginning to end gt To stop this mode press the button or a playback mode button PLAY FF REW STOP The menu TAPE CONTROL The menu tape controls provides more control functions This menu only SETUP appears when a cassette is loaded TIMER PROGRAM R PRESET gt To open the menu press SETUP then select TAPE CONTROL and confirm with OK ENTER VCR SETUP gt TAPE CONTROL SELECT OK CONFIRM SETUP END Tape remain This function allows you to see if there is enough space on the cassette for a planned recording gt Confirm TAPE REMAIN with OK ENTER gt In the next menu select the length of the cassette currently inserted Confirm with You will see the remaining time in the format HH MM for a few seconds in the right bottom corner of the TV screen in the picture below 1 hour 27 minutes TAPE CONTROL TAPE REMAIN 129 gt E 240 x D Rs SELECT San neS OKCONFIRM SETUP END E 240 01 27 Go to zero gt With this function you can access the zero position of the cassette This is the position where the cassette started after inserting it after switching the device on or after resetting the counter see next chapter 22 MEDION gt Inthe menu TAPE CONTROL select GO
14. MODE REPEAT MODE oo f l be Timer Recording Standby g a D Io ae ste Timer Recording Error p T S oo PE r Recording in Progress 0 0 amp aa E e a R AJS PRELP reorangpase DVD PLAYER VCR MD 80975 13 INITIAL INSTALLATION AND VCR MODE Autotuning AUTO SET OK CONFIRM SETUP END PLEASE CHANGE THE TV CHTO 54 PR SELECT OK CONFIRM SETUP END After the DVD player VCR the television set and the power supply have been connected switch on the DVD player VCR and the television set You should see the picture AUTO SET after switching on the TV and DVD player VCR for the first time The AUTO SET tunes in all stations you can receive in your country gt Wait for the end of the automatic tuning and then press ENTER The clock is set automatically The DVD player VCR s transmitting channel for the RF antenna output is factory set to UHF CH 52 While tuning in if other stations are found positioned on or near the RF OUTPUT CH 52 a guide message appears automatically The DVD player VCR recommends the best RF OUTPUT CH number automatically gt Press OK ENTER to confirm the recommended PR number You can change the programme locations according to your wishes see next chapter gt Press SETUP to exit the AUTO SET menu Arranging programme locations After the Autotuning a list of the channels will appear in the menu in the order they were found You migh
15. Proceed like this with all titles you want in the list gt If you want to delete one title from the list select this title using the arrow buttons and press CLEAR gt If you want to delete the complete list select the dustbin symbol in the middle of the menu and press OK ENTER 12 134 4906 P90 4d PPE DIT M DISPLAY PICTURE gt JPG W 000 000 0 00 00 0 00 00 LIST 1 LBA 3 4 5 6 7 PHOTO 320 BAK001 JPG PICTURE gt JPG 000 000 0 00 00 0 00 00 LIST Ba PHOTO 320 BAK001 JPG 32 Playback gt Navigate the folders and titles as described above in the paragraph Playback in the chapter Playing CD or MP3 discs When you select a file you will see the preview of the picture on the right side of the menu gt To start a slide show of the pictures select a picture and press PLAY or OK ENTER All pictures in the current folder will be shown successively until you press STOP gt Return to the menu using the button STOP On the bottom bar of the display window you will find playback options Rotate the picture using the arrow buttons 4 P skip to the previous or next picture with PREV or NEXT Slide show delay time You can control the speed of the slideshow gt Todo so select the symbol Time in the middle of the menu using the arrow button gt gt Press OK ENTER repeatedly to toggle between 2 seconds 4 seconds 10 seconds and OFF With the setting OFF no slide
16. RF OUTPUT SET 16 9 SET OSD ON OFF AUTO CLOCK PR SELECT OK CONFIRM SETUP END OSD ON OFF ON SETUP END 16 The DVD player VCR is factory set to OSD ON Thus the On Screen Display information on current functions such as the number of the current TV channel will be displayed in the normal picture If you do not want to display the OSD to show you can switch it off gt gt gt gt Press SETUP to call up the DVD player VCR s SETUP menu Select VCR SETUP and press OK SETUP In the VCR SETUP select OSDN ON OFF and press OK SETUP In the menu OSD ON OFF select OFF and press OK SETUP MEDION VCR PLAYBACK gt Press VCR to select the VCR mode gt Insert a tape in the tape compartment Playback functions gt Press PLAY PAUSE to start playback gt To stop the tape press STOP gt Press EJECT on the device or OPEN CLOSE on the remote to eject the tape gt To interrupt the playback press PLAY PAUSE The DVD player VCR is now in pause mode gt Press PLAY PAUSE again to resume playback gt For a fast forward or reverse search press FF or REW during playback mode Press twice to double the speed If the tape was recorded in LP Long Play no colour is seen during the fast search Press PLAY PAUSE again to return to normal speed gt For slow forward search press FF during pause mode Press PLAY PAUSE again to return to normal speed The slow reverse function is not ava
17. TABLE OF CONTENTS SAFETY INSTRUCTIONS 00 4 PREPARATION 02ec ce eeeeceeees 6 Unpacking the device 24 6 The remote control 000088 6 CONNECTIONS AND CONNECTION OPTIONS 7 Connecting the television with a SCART cable 7 Connecting the television with an antenna cable 8 Connecting the DVD player VCR through a satellite receiver 9 Connecting the DVD player VCR to a HI FI system 0 eee eee eee 10 Connecting a surround amplifier or receiver 10 Connecting another video device 11 BASIC OPERATION lt 3 ota exe See ees 12 Turning the DVD player VCR on and off 12 Auto power Off 0 0 0 e eee eee 12 Child 1OCK ess oe aed Sais es oie eee Pate anes 12 Output selection 0 004 12 The DVD player VCR s operation display 13 INITIAL INSTALLATION AND VCR MODE 14 Autotuning 0 cece eee ee eee 14 Arranging programme locations 14 Manual tuning 000 15 Clearing programme locations 15 Creating station names 16 Setting time and date 16 OSD ON and OFF 2 ee eee 16 VCR PLAYBACK ctos hie ecereia ature ete 17 Playback functions 2 2008 17 VCR RECORDING 02 05 Ae yee d eet 18 Manual recordings 00 18 Preterming the picture format 4 3 16 9 18 Selecting the recording sour
18. ads are dirty Clean the video heads using a special cleaning cassette At the end of its life the appliance must not be disposed of in household rubbish Enquire about the options for environmentally friendly disposal Batteries Do not dispose of used batteries in the household rubbish They must be deposited at a collection point for used batteries DVD PLAYER VCR MD 80975 at It g 39 TECHNICAL DATA Voltage supply Power consumption Batteries for the remote control Colour TV system Video system Recording qualities VCR Laser output Playback formats 200 240 V 50 60 Hz 22W 2 x 1 5 V R3 LRO3 Type AAA PAL NTSC VHS SP LP LASER KLASSE 1 CLASS 1 LASER PRODUCT APPAREIL LASER DE CATEGORIE 1 Class 1 laser product VHS video cassette DVD Digital Versatile Disk DVD RW DVD R DVD RW VCD SVCD CD Audio CD R CD RW JPEG CD MP3 CD COMPACT SG When playing audio CDs please check the label e Please note These days there are many non standard CD recording I and copy protection procedures as well as various blank CD R and CD RW discs Therefore in individual cases there may be read errors Subject to technical changes 40 or delays This does not mean the unit is faulty MEDION
19. al title number current chapter number t EJ 001 023 total chapter number 01 03 20 current time current track number t EJ 001 013 i total track number CJ 01 03 20 4 current time 27 DISC OPERATION Repeat functions 28 Storing markers DVD vof You can store a bookmark at any scene you wish to quickly return to at any point of the disc gt Press the button MARK to open the marker entry field gt To set the first bookmark press OK ENTER twice The first entry place is 1 is set and highlighted gt To set the second bookmark press OK ENTER again The second entry place 2 is set and highlighted gt Proceed like this to set more bookmarks gt Press MARK again to close the entry field gt To access a set marker use the arrow buttons lt q P gt gt Press PLAY to play the disc from the marker gt If you want to delete a marker highlight it and press CLEAR Repeating a defined period DVD v cD m3 gt Each time you press the button REPEAT during the playback mode the repeat plaback starts as described below DVD CD MP3 VCD CHAPTER Repeatone TRACK TITLE Repeat all ALL OFF Random a OFF t CHAPTER The current chapter will be repeated t TITLE The current title will be repeated t TRACK The current track will be repeated t ALL The whole disc will be repeated Repeat one The current file will be repeated Repe
20. at all All files on the disc will be repeated Random The files on the disc will be played in random order tl OFF End of repeat playback For VCD s the PBC must be turned off for repear playback MEDION Disc OPERATION Repeating a period from Ato B DVD vcd You can repeat a defined period from A to B gt During playback press the button A B to set the start of the repeat sequence t_ A appears on the screen gt Press A B again to set the end of the repeat sequence t_ A B symbol appears on the screen The defined section will now be repeated continuously gt Press the A B a third time to end the repeat sequence OFF appears on the screen Picture adjustments Zoom D vco sveo gt Press the button ZOOM once The image is enlarged x2 gt Press the button ZOOM twice The image is enlarged x4 gt To return to the normal size press ZOOM again gt You can use the arrow buttons to select the section of the enlarged image that you wish to view only for DVDs During zoom mode the subtitles cannot be seen Angle pvp Ona few DVDs some individual scenes are recorded from various camera angles gt Press the button ANGLE to activate the function If the scene has 2 01 01 various perspectives the symbol and the current perspective total number of perspectives are displayed gt Press ANGLE again to switch to the next camera position Audio settings Audio language DVD
21. buttons Vcd You can search a track number or a time directly gt To search a track number press the button SEARCH once The entry field shows the current track number and the total number of tracks gt Enter the desired track number using the number buttons and confirm with OK ENTER gt To search a time press the button SEARCH twice The entry field shows the current time gt Enter the desired time using the number buttons and confirm with OK ENTER Searching in the DVD menus DVD DVDs usually have one or more menus stored on them and you can use these to navigate on the DVD gt Using the buttons TITLE PBC and MENU you can access the menus stored on the DVD during DVD playback gt You navigate to the items in the DVD menu using the arrow keys Confirm each entry with OK ENTER Please note that the precise functions available in each menu depend on the DVD E g some DVDs only have one menu that appears no matter which method is used PBC function veo20 Some type 2 0 VCDs that have a title chapter structure give the option of playback control Using the TITLE PBC button you can switch the extended functions on or off for controlling the title chapter Possible functions include Direct title selection of title chapter SKIP functions e Please note that the precise functions available depend on the VCD DVD PLAYER VCR MD 80975 Disc OPERATION current title number t EJ 001 003 tot
22. ce 19 To watch a TV Channel or DVD during FECOMdING wack pews aa an hed yo Qe oy 19 Timer recording 00 0 0 e ee eee 20 More video cassette functions 22 The menu TAPE CONTROL 22 The VCR Hi Fi sound system DVD PLAYER VCR MD 80975 DISC OPERATION About DVDS iis ge soe r ee i Ved Bld ae aes 25 Inserting a disc 000 000 26 Basic playback 000008 26 Searching options 26 Repeat functions 00008 28 Picture adjustments 008 29 Audio settings 000 0 0 ee 29 Displaying and editing the current status 30 OTHER DISC TYPES ee eeee 31 Playing CD or MP3 discs 31 Playing JPEG pictures 0 32 Playing MPEG movies 4 33 SETTINGS IN THE DVD SETUP MENU 34 Navigating the menu 34 The menu Language 00 34 The menu Video 2 0006 35 The menu Audio 0 00 00 008 35 The menu Others 2 00005 35 Table of language codes 37 TROUBLESHOOTING 0000 38 Disposal 0 eee ee ee ee eee ee 39 TECHNICAL DATAS ccc tadeaiesaeees 40 SAFETY INSTRUCTIONS About these instructions afl Please read these instructions carefully before using the system Note the warnings on the device and in the opera
23. ded with encryption signals This enables DVDs to be sub divided into 8 different authorisation classes For your information we list here the authorisation classes that the Motion Picture Association has established 1 KIDS Suitable even for small children 2G For all age groups 3 PG Parental guidance recommended 4 PG 13 Parental guidance strongly recommended Some scenes not suitable for children under 13 5 PG R Under 17 parental guidance recommended 6 R Parental guidance strongly recommended for children and teenagers below 17 7 NC 17 Not suitable for young people under 17 8 ADULT Only for adults For example if you have inserted a DVD that is coded with authorisation class 7 or 8 ADULT and you have selected authorisation classes 1 to 6 a message appears and the viewer must enter a password Parts of a DVD certain scenes for example may also be encoded with an authorisation class or a range of authorisation classes gt When you move to the right column of the menu to change the authorisation class you have to enter the password first see the next chapter Password You can alter the password set by the factory here gt Select PASSWORD with gt Anew menu INPUT PASSWORD comes up gt Enter the four digits using the number keys The factory set password is 3308 If you enter a wrong password the message WRONG PASSWORD appears in the right column If you enter the correct password th
24. e press PREV or NEXT Time display gt Press DISPLAY to open a menu which shows the current disc mode current track total track number 00 01 03 time elapsed Q OFF repeat playback mode 0 9 Enter DVD PLAYER VCR MD 80975 33 SETTINGS IN THE DVD SETUP MENU ENGLISH All DVD settings are done in the SETUP menu that you open using the pele button SETUP when in DVD mode To open the SETUP menu the DVD player VCR must be in the stop mode The SETUP covers the menus Language Video Audio Others Navigating the menu gt After opening the SETUP menu use the arrow buttons A W to select a menu gt To enter the first entry of the menu press gt gt Press P again to select the first of the options displayed in the right column of the menu gt Select the desired option with A W and confirm with OK ENTER gt Return to the menus on left side with lt gt You can leave the SETUP menu at any time with the button SETUP The menu Language OSD ENGLISH peas see gt Select the OSD language here i e the language of the SETUP menu wee ey Pare and the other text displays OSD stand for on screen display DUTCH AUDIO Sash gt Select the default setting for the spoken language on the DVD here If w EA laaaol the DVD does not contain the selected language it is played back in the HUNGARI original language AUTO PR Hi Last
25. e message CHANGE PASSWORD appears in the right column gt Enter the new four digits using the number keys and confirm with OK ENTER The message CONFIRM PASSWORD appears in the right column gt Enter the new four digits again and confirm with OK ENTER e Note down your password and keep it in a safe place MEDION SETTINGS IN THE DVD SETUP MENU Table of language codes In the menus AUDIO SUBTITLE and DISC you can select additional languages under the entry Others by entering a four digit code Code Language Code Language Code Language Code Language Code Language 6565 Afar 6983 Spanish 7473 Yiddish 7789 Burmese 8385 Sundanese 6566 Abkhazian 6984 Estonian 7487 Javanese 7865 Nauru 8386 Swedish 6570 Afrikaans 6985 Basque 7565 Georgian 7869 Nepali 8387 Swahili 6577 Ameharic 7065 Persian 7575 Kazakh 7876 Dutch 8465 Tamil 6582 Arabic 7073 Finnish 7576 Greenlandic 7879 Norwegian 8469 Telugu 6583 Assamese 7074 Fiji 7577 Cambodian 7982 Oriya 8471 Tajik 6588 Aymara 7079 Faroese 7578 Kannada 8065 Panjabi 8472 Thai 6590 Azerbaijani 7082 French 7579 Korean 8076 Polish 8473 Tigrinya 6665 Bashkir 7089 Frisian 7583 Kashmiri 8083 Pashto Pushto 8475 Turkmen 6669 Byelorussian 7165 Irish 7585 Kurdish 8084 Portuguese 8476 Tagalog 6671 Bulgarian 7168 Scots Gaelic 7589 Kirghiz 8185 Quechua 8479 Tonga 6672 Bihari 7176 Galician 7665 Latin 8277 Rhaeto Romance 8482 Turkish 6678 Bengali Bangla 7178 Guarani 7678 Lingala 8279 Roman
26. he button DVD gt Make sure that there is about 15 cm of space in front of the disc compartment so that it can open without hindrance Press OPEN CLOSE to open the disc tray gt Insert a disc into the disc compartment with the title side upwards Make sure you place the disc in the middle of the disc holder so that it does not stick when you close the compartment gt Press the OPEN CLOSE button The disc compartment closes Basic playback D veo svoo co es JPG mec Searching options Special message The disc usually start playing automatically after a few seconds The display indicator depends on the type of disc DVD video CD music CD MP3 or JPEG CD etc and its format You may need to press PLAY PAUSE or a menu may appear and you need to make a selection using the arrow keys gt To stop the disc press STOP gt To interrupt the playback press PLAY PAUSE The DVD player VCR is now in pause mode gt Press PLAY PAUSE again to resume playback Fastsearch DVD vcd cD MP3 gt Fora fast forward or reverse search press FF or REW during playback mode Press repeatedly to increase the speed 2 x gt 4 x gt 8 x gt 32 x Press PLAY PAUSE again to return to normal speed gt VCD s CD s MP3 discs will increase the speed 2 x gt 4 x gt 8 x The reverse playback may be not available for certain DVD s Slow search DVD VCD For slow forward or reverse search press FF or REW during pause E
27. he device is the VCR mode To select DVD ML gt Press the button DVD In the DVD mode VD is displayed on the display The remote control then works in the DVD function win To select VCR gt Press the button VCR In the VCR mode G2 disappears from the display The remote control then works in the VCR function To select the external input gt Press the button INPUT With INPUT you select external devices which are connected to the DVD player VCR s input sockets AV1 the SCART socket EURO AV1 AV2 the SCART socket EURO AV2 DECODER AV F the front AV sockets This button does not work during playback during recording and in the DVD mode 12 MEDION BASIC OPERATION The DVD player VCR s operation display The DVD player VCR s display shows the following pictures for the different operation modes Full display VCR playback Fast forward Rewinding Fast playback CUE Fast reverse playback REVIEW Slow playback Still picture Stop Child Lock Repeat one chapter Dv0 Repeat track VCO Repeat title 0v0 Repeat ALL vco Repeat a defined period from A I 0VD vco Repeat a defined period from A to B Bvb veo DVD and VCR operation DVD OPERATION VCR OPERATION pi pys DVD playback oo PI AY GP H retpleyox EF of U D Fast reverse playback oo QE I oh fi M amp Slow playback To 4 f l a O H PIL DW GTa ah UF GAFE Recording and repeat mode RECORDING
28. ian 8484 Tatar 6679 Tibetan 7185 Gujarati 7679 Laothian 8285 Russian 8487 Twi 6682 Breton 7265 Hausa 7684 Lithuanian 8365 Sansrit 8575 Ukrainian 6765 Catalan 7273 Hindi 7686 Latvian Lettish 8368 Sindhi 8582 Urdu 6779 Corsican 7282 Croatian 7771 Malagasy 8372 Serbo Croatian 8590 Uzbek 6783 Czech 7285 Hungarian 7773 Maori 8373 Singhalese 8673 Vietnamese 6789 Welsh 7289 Armenian 7775 Macedonian 8375 Slovak 8679 Volap k 6865 Danish 7365 Interlingua 7776 Malayalam 8376 Slovenian 8779 Wolof 6869 German 7378 Indonesian 7778 Mongolian 8377 Samoan 8872 Xhosa 6890 Bhutani 7383 Icelandic 7779 Moldavian 8378 Shona 8979 Yoruba 6976 Greek 7384 Italian 7782 Marathi 8379 Somali 9072 Chinese 6978 English 7387 Hebrew 7783 Malay 8381 Albanian 9085 Zulu 6979 Esperanto 7465 Japanese 7784 Maltese 8382 Serbian DVD PLAYER VCR MD 80975 37 TROUBLESHOOTING PROBLEM GENERAL No standby display The DVD player VCR does not work The unit does not respond to the remote control No picture Incorrect image format 4 3 16 9 No sound The remote control does not work DVD RELATED PROBLEMS Distorted picture 38 If errors occur check first whether you can correct the problem yourself The following list may help you Never try to repair the device yourself Contact our service centre or other qualified personnel if a repair is necessary POSSIBLE CAUSE REMEDY Check the mains connection Is the plug firmly inserted in the mains socket P
29. ilable for the VCR function gt If you want the tape to advance frame by frame press NEXT during pause mode Each time you press the button the picture advances by one frame gt To rewind 15 seconds of the tape and start again automatically press REPLAY during playback gt To skip 30 seconds of the tape and revert to normal playback press CM_SKIP Commercial Skip Automatic Picture Adjustment The DVD player VCR is equipped with an automatic tracking feature If the picture is poor flickering if noises occur in the upper or lower part of the picture in slow playback or if the picture vibrates up and down in pause mode the tracking function can improve the picture The tracks are corrected gt To apply the function press the buttons TRACKING or number buttons 1 or 3 during playback Auto detector The DVD player VCR is also equipped with an auto detector which detects contaminated video heads If a contaminated video head is found a message will appear on the screen In this case apply a special cleaning cassette DVD PLAYER VCR MD 80975 17 VCR RECORDING Manual recordings SP Standard Play LP Long Play In LP more recording time will fit on the tape however in a slightly poorer quality Turn on all connected devices Select the VCR mode with the button VCR Insert a recording tape v v v v Select the source from which you want to tape see the following chapter Se
30. ket EURO AV2 DECODER of your DVD player VCR _ First player To copy from your DVD player VCR to another VCR seor l connect a scart lead gt Use a SCART cable to connect the SCART IN socket of the other device from player to second to the SCART OUT socket EURO AV1 of your DVD player VCR Second player Connecting a video camera You can connect a camcorder in two ways to the front AV inputs sockets using a phono cable either with one audio cable red or with two audio cable red white see picture on the side to the SCART input socket using a SCART phono cable see picture below Television Aerial Camcorder DVD PLAYER VCR MD 80975 11 BASIC OPERATION Turning the DVD player VCR on and off gt Plug in the mains cable gt Press the button to switch the DVD player VCR on gt Press C on the remote control to switch back to standby mode The display will be dimmed Auto power off When no tape or disc is played and no tuning signal is received for five minutes the DVD player VCR will switch into the standby mode Child lock You can lock the buttons on the front panel gt In the standby mode press the button A on the remote control for about five seconds The lock indicator SAFE will appear on the display Keep the remote control in a safe place gt To release the child lock press any button on the remote control Output selection The default mode of t
31. lecting the recording source gt Choose the desired taping speed SP or LP with the button SPEED gt Press REC to start the recording Predeterming the recording time gt If you press REC once the VCR will continue the recording until STOP is pressed gt By pressing the REC button repeatedly you can set a recording time in increments of 30 minutes up to a maximum of 10 hours REC pressed twice records 30 minutes then stops REC pressed three times records 60 minute then stops REC pressed 21 times records 10 hours then stops REC pressed 22 times Like REC pressed once gt If you want to stop this recording press REC repeatedly until REC shows again in the display then press STOP Preterming the picture format 4 3 16 9 PR SE OK CONF VCR SETUP CLOCK SET RF OUTPUT SET gt 16 9 SET c OF LE CT IRM SETUP END PR SELECT OK CONFIRM SETUP END On video cassettes VHS PAL _ 18 With this DVD player VCR you can play and record programmes in the 16 9 wide screen format gt Press SETUP to open the SETUP menu gt Select VCR SETUP and confirm with OK ENTER gt Select 16 9 SET and The menu 16 9 SET opens AUTO The video automatically detects the picture format 16 9 or 4 3 and records or plays this programme in the original format ON The video will play or record all broadcasts in the 16 9 format 4 3 formats will be converted to 16 9
32. nd confirm with OK ENTER You will see the stations which have been stored so far gt Choose any unused programme number or P xx Confirm with OK ENTER e IIf possible use the the same programme number for the video as for the TV After choosing the programme number you can carry out various settings for the new programme RECEPTION the broadcast system you want Aerial CH or Cabel CC AUTOSEARCH you can enter the channel number with the number buttons or you can use the arrow buttons lt gt A channel search starts If a channel has been found it will show on the TV FINE TUNING press OK ENTER longer or repeatedly to tune in the picture DECODER If the programme is encoded and you have a decoder connected to the socket EURO AV2 press the arrow buttons lt P gt to select ON or OFF NAME change or create the station name see Creating station names p 16 Clearing programme locations gt In the menu PR PRESET select the entry PR ERASE gt Select the station the location number you want to clear gt Review the picture by pressing the arrow lt button gt Press OK ENTER to clear the programm location DVD PLAYER VCR MD 80975 PR PRESET AUTO SET gt MANUAL SET PR ERASE PR ALIGN PR SELECT OK CONFIRM SETUP END i t14 j SELECT OK CONFIRM NAME sa PR UP DOWN e
33. o inputs of you Hi Fi system gt Connect the TV as explained above Use an audio cinch cable red white to transmit the sound Television Aerial 200 240V 50 60 Hz Your DVD player VCR has digital outputs which allow you to transfer the sound to a Dolby Digital amplifier or Home Theatre Receiver with Dolby Digital decoding capability For this connection you can use either the COAXIAL DIGITAL AUDIO OUT orthe OPTICAL DIGITAL AUDIO OUT CONNECTING CABLE Not supplied gt Connect a a coaxial cable or an optical cable to the coaxial input or optical input of your surround amplifier i Please note that to activate the digital output you have to select the option DIGITAL OUT in the DVD AUDIO menu cf The menu Audio page 35 10 MEDION CONNECTIONS AND CONNECTION OPTIONS Connecting another video device Other VCR Decoder for Pay TV Camcorder Being equipped with two SCART 2nd scar INPUT ONLY connections EUROAV2 DECODERfor PE n SCART IN and EURO AV1 for SCART IN OUT your VCR can both record the signals from another video device such as a SAT receiver a video camera another VCR or a DVD player as well as record to another VCR Video Player Satellite Receiver INPUT OUTPUT TV other VCR To copy from another device to your DVD player VCR gt Use a SCART cable to connect the SCART OUT socket of the other device to the SCART IN soc
34. r for Pay TV Connect another device as explained in the chapter Connections To eR ideo Mayer copy from another device to your DVD player VCR page 11 Satellite Receiver gt Insert a tape into your DVD player VCR gt With the button INPUT Select the source you want to record from fora device connected to the SCART socket EURO AV 1 select AV1 for a device connected to the SCART socket EURO AV2 select AV2 for a device connected to the front AV sockets select AV F gt Set the other machine to playback gt Press REC on your DVD player VCR To record from your DVD player VCR to another video VCR Connect another device as explained in the chapter Connections To copy from your DVD player VCR to another VCR page 11 TV other VCR gt On the other video select its AV input Set the machine to record gt Switch your DVD player VCR to playback To watch a TV Channel or DVD during recording If you want to play a DVD during recording a videotape insert the DVD Press DVD to select the DVD mode and play the DVD If you want to watch a TV channel recording from the internal DVD player press VCR to select the VCR mode and select the channel with the PR buttons DVD PLAYER VCR MD 80975 19 VCR RECORDING Timer recording Notes on timer recording and VPS PDC You can set a fixed time and date for a scheduled recording Additionally your DVD player
35. ress the STANDBY ON button on the DVD player VCR or remote control If the unit has been affected by a storm static charging or other external factor try the following procedure Press the STANDBY ON button on the DVD player VCR standby mode Then pull out the mains cable and plug it back in Check whether the batteries need changing and have been inserted correctly Remove anything which may be blocking the signal between the infrared transmitter on the remote control and the unit s sensor Is the distance between the remote control and the DVD player VCR too great over 7 m Are the cable connections between the DVD and television correct and undamaged Is the television switched on Have you selected the video channel on the television Have you selected the correct video output on the DVD player VCR Do you need to carry out the channel search again Check in the SETUPmenu gt VIDEO gt TV ASPECT whether the selected format matches the television Has the sound been switched off MUTE Check the audio connections Incorrect audio output settings DVD playback is either in fast forward or slow motion No batteries inserted or batteries flat The remote control is not pointing to the device Check whether the DVD is dirty and if necessary clean it carefully wiping it from the centre to the edge with a soft dry cloth Slight picture distortion is not a malfunction MEDION The disc does not play even though PLAY
36. roadcasting station in the top right corner of TV screen if no sound mode is displayed press the button AUDIO STEREO sterero sound BIL I BIL II bilingual sound no display monaural sound During playback of a VCR the DVD player VCR displays what is recorded on the cassette if not press the button AUDIO HI FI stereo bilingual no display monaural sound DVD PLAYER VCR MD 80975 In the stop mode STOP SP PR10 CORON STEREO ON During playback 23 VCR RECORDING Selecting the sound output By pressing the button AUDIO repeatedly you can select the sound output During a stereo playback HI FI L R Hi Fi stereo HI FI LEFT left audio channel only HI FI RIGHT right audio channel only HI FI OFF the normal mono sound track of Hi Fi cassette During playback of a bilingual playback BIL main language original soundtrack BIL Il sub language dubbed BIL I Il both main and sub language BIL OFF bilingual off For mono playback there is no choice available 24 MEDION Disc OPERATION This chapter encompasses the playback functions of all Ti supported disc formats i e DVD VCD SVCDO CD MP3 JPEG MPEG About DVDs A DVD Digital Versatile Disk is a digital medium that stores information DVDs are marked with one of the symbols shown here There are different types of DVD with different storage capacities depending on how the information is s
37. show will be prompted and the selected picture will remain displayed Combination of music and picture You can combine the playback of picture and sound if there are both picture JPEG and sound MP3 files on the disc gt Insert the disc with JPEG and MP3 files The menu shows the music symbol musical notes and the picture symbol camera on the left side of the menu Vv In order only to playback the music select the music symbol notes with the arrow button lt q The list of MP3 files appears and you can playback as usual gt In order to prepare the combined playback of music and pictures select the picture symbol camera with the arrow button lt q The list of JPEG files appears gt Then select the symbol Combination Play in the middle of the menu using the arrow button gt and W gt Press PLAY The combined playback will start MEDION OTHER DISC TYPES Playing MPEG movies When you insert a MP3 or CDDA disc a file menu appears which shows the directories and files on this disc Playback gt Navigate the folders and titles as described above in the paragraph Playback in the chapter Playing MP3 or CD DA discs When you select a file you will see the preview of the movie on the right side of the menu gt To start the movie in full screen size select it and press PLAY or OK ENTER gt Return to the menu using the button STOP gt To skip to the previous or next movi
38. sing a different transmitting channel If the quality of the test signal transmitted to the TV is poor due to interference caused by a station transmitting on channel 52 you can tune the player to a diffferent transmitting channel Find a free channel between 21 and 69 on your TV gt In the VCR mode press SETUP to open the VCR SETUP MEDION CONNECTIONS AND CONNECTION OPTIONS gt Select VCR OUTPUT and confirm with OK ENTER gt Select RF OUTPUT SET and confirm with OK ENTER gt Using the number buttons type in different channel number between 21 and 69 gt Confirm with OK ENTER and exit with SETUP If the quality of the test signal transmitted to the TV is poor for other reasons fine tuning on the TV may help if necessary refer to the TV manual Connecting the DVD player VCR through a satellite receiver If you use a satellite receiver for the TV reception connect your DVD player VCR as shown in this illustration Television Aerial Back vi 2 O E Satellite gt Press the button INPUT on the remote control of your DVD player VCR to select the satellite receiver AV2 DVD PLAYER VCR MD 80975 9 CONNECTIONS AND CONNECTION OPTIONS Connecting the DVD player VCR to a HI FI system You can transfer the sound of your DVD player VCR to a HI FI system gt Connect a phono cable red white to the left and right audio output sockets of your DVD player VCR and the matching audi
39. t wish to arrange the channels in another order e g BB1 as PRO1 BB2 as PRO2 ITV as PRO3 Channel4 as PRO4 Channel5 as PROS To allocate the new locations follow this procedure gt In the VCR mode call up the SETUP menu with SETUP gt Select PR PRESET and confirm with OK ENTER gt Inthe menu PR PRESET select PR ALIGN and confirm with OK ENTER 1 If you do not see this picture because you do not use a SCART cable search this picture with the station tuning function of your TV set refer to the TV s user manual if necessary First look for CH 52 on the TV set In case of interference problems on CH 52 type in another transmission channel between 21 and 69 14 MEDION INITIAL INSTALLATION AND VCR MODE gt Select the channel which needs to be moved and press OK ENTER The channel will blink gt Use the arrow buttons to move the channel to the desired new place gt Press OK ENTER to confirm Proceed like this for all other channels which are to be moved Manual tuning If the DVD player VCR is connected to the TV via a SCART cable press the AV button of the TV set to see the picture from your DVD player VCR If the DVD player VCR is connected to the TV via an antenna cable select that channel on the TV where the player s RF Channel 52 was stored gt Press SETUP to call up the SETUP menu gt Select PR PRESET and confirm with OK ENTER gt Inthe menu PR PRESET select MANUAL SET a
40. tery is swallowed please obtain immediate medical assistance How to use the remote control ml AN gt Operate the remote control within 7 m from the unit within a range of 60 towards the infrared sensor on the front gt Do not press two buttons at the same time 6 MEDION CONNECTIONS AND CONNECTION OPTIONS The DVD player VCR can be connected in various ways to other input and output devices to a television to an amplifier receiver to other audio video devices H Make sure that all devices are switched off before connecting them Only connect the units to the mains when the other connections are complete Connecting the television with a SCART cable The SCART cable is the simplest connection between your DVD player VCR and the television This connection provides a good picture and sound quality gt Connect the antenna cable to ANT OUT socket of your DVD player VCR and the ANTENNA IN socket of your TV gt Use another antenna cable to connect the ANT IN socket of your DVD player VCR to the antenna socket in the wall gt Connect the SCART cable to the EURO AV1 socket on your DVD player VCR and the SCART IN socket of you TV Television Scart lead supplied Back view of your player gt Press the TV VCR button to switch into the VCR mode You can now switch channels with the PR buttons on the remote control of you DVD player VCR Press TV VCR again to s
41. ting instructions Always keep the operating instructions close to hand If you sell or give the unit away please ensure that you also pass on these instructions Never let children handle electrical devices The appliance is not intended for use by young children without supervision If swallowed batteries may endanger life Therefore keep the device and batteries out of the reach of children If a battery is swallowed get immediate medical assistance Keep plastic packaging out of the reach of children There is a risk of asphyxiation Setting the device up safely Place the device on a stable level surface It is not designed for use in rooms that are very humid e g bathrooms Always ensure that the ventilation grille is uncovered to make sure there is adequate ventilation there are no direct heat sources e g heaters that could affect the device the device is not in direct sunlight you avoid contact with damp still or sprayed water e g do not place vases on top of the device the device is not placed close to magnetic fields e g loudspeakers naked flames such as lit candles are not placed near the device If the device is moved from a cold to a warm location condensation may occur in the device Wait for a few hours before using it Do not subject the device to shocks These could damage the sensitive electronics Ensure that the mains
42. title using the arrow buttons A VW and press OK ENTER to confirm To open a folder of a MP3 disc move the cursor to the desired folder using the arrow buttons amp W and press OK ENTER to confirm Vv gt To go back to a folder above the current folder select the uppermost folder and press the arrow button lt q gt To playback a file a title move the cursor to the desired folder using the arrow buttons amp W and press OK ENTER or PLAY start the playback You can also select a title by typing in the title number using the number buttons Repeat mode gt You can use the button REPEAT to toggle between REPEAT ONE gt REPEAT ALL gt RANDOM and OFF Alternatively you can move the cursor to the REPEAT t_ symbol using the arrow button gt and press OK ENTER repeatedly DVD PLAYER VCR MD 80975 MUSIC MUSIC gt MP3 gt 001 018 0 00 34 0 03 59 UST PROGRAM EEE 01 musicfamilys 5 usin i c 05 ci j max 6 01 musicfamity iam Smooth MUSIC gt MP3 gt 001 018 0 00 34 0 03 59 Repeat one usT PROGRAM max 6 01 musicfamity i am Smooth 31 OTHER DISC TYPES MUSIC gt MP3 X eae REPEAT FILE uSsT H GEN army B max 6 02 musicfamily am Lager T Pree Playing JPEG pictures Programming titles gt Move the cursor to the first title you want in the programmed list gt Press PROGRAM The title moves to the PROGRAM list on the right side of the menu gt
43. to start However you can use the unit in the DVD mode e g to watch DVD s during the recording Deleting and changing timer recordings gt Select TIMER PROGRAM and confirm with OK ENTER The menu TIMER PROGRAM appears The menu displays an overview for all scheduled progammes gt In order to delete a programming select it with the arrow buttons A V and press OK ENTER The programming menu appears Press the number button 0 and Confirm with OK ENTER gt In order to change a programming select it with the arrow buttons A V and press OK ENTER The programming menu appears You can carry out the changes as described in the section Normal timer recording page 21 DVD PLAYER VCR MD 80975 PRe SELECT OK CONFIRM SETUP END 0 ERASE CORRECT SETUP END 21 VCR RECORDING More video cassette functions The counter e The counter counts in real time from the point you load the cassette The counter does not count unrecorded parts of the tape If you rewind beyond the zero position the counter counts in negative values e g 0 01 1 5 Display information gt When a cassette is loaded you can call up information by pressing the STOP sP PRON BBCI DISPLAY button 1 x Complete information on current status gt time and date 2 x Counter 14 00 08 05 V 180 00 48 When the cassette is not playing playback fast forward fast reverse the remaining
44. tored DVD structure Video DVDs are divided into titles and chapters A DVD can have several titles which may in turn be made up of several chapters The titles and chapters are each numbered sequentially The first title of a DVD usually comprises licence details and manufacturer s information The next title is usually the film itself Other titles may include such items as making of documentaries film previews or information on the actors Up to eight languages and subtitles in as many as 32 different languages can be stored on DVDs Any combination of languages and subtitles can be selected for playing back discs Regional codes For reasons connected with global DVD sales a code has been developed for DVDs that allows the recording to be played only on units purchased in a particular region This code is based on a system that divides the world into six regions As Europe is zone 2 your DVD player will only play DVDs that have the regional code 2 The regional code is printed on the DVD packaging refer to the following logo Apart from DVDs with the regional code 2 the unit will only play DVDs with the regional code 0 suitable for any DVD player e If you have problems when playing certain DVDs make sure that the l DVD has the regional code 2 or 0 DVD PLAYER VCR MD 80975 Languages and subtitles 25 DISC OPERATION Inserting a disc e To activate the DVD mode press t
45. try you would like to change using the A W buttons gt If you would like to change the title chapter or time type in a different value using the number buttons or the arrow buttons lt q P gt gt If you would like to change other entries use the lt gt buttons gt At the end confirm with OK ENTER Display with VCD s VoD gt Press DISPLAY in playback mode The display menu opens current track total track number time elapsed repeat playback mode PBC mode gt Edit the menu as explained in the previous paragraph on DVD s MEDION OTHER DISC TYPES wai w re Wey When you insert a MP3 disc a CD disc a JPEG disc or an MPEG disc a menu will appear which shows the directories and files on this disc Playing CD or MP3 discs The MP3 format The MP3 format is a compression format used for audio data The MP3 format was developed in order to greatly reduce the size of audio data MP3 files can only be played if they have been saved with the file extension mp3 Unlike traditional audio CDs MP3 CDs can be subdivided into directories folders albums and files tracks titles just like a data CD on your computer When a CD is inserted a list of the titles will appear in the menu When an MP3 is inserted its structure of folders and files will appear in the menu The playback functions are similar Playback gt To select a title move the cursor to th
46. unit Avoid the use of chemical solutions and cleaning products because these may damage the unit s surface and or labels DVD PLAYER VCR MD 80975 SAFETY INSTRUCTIONS LASER KLASSE 1 CLASS 1 LASER PRODUCT APPAREIL LASER DE CATEGORIE 1 PREPARATION Unpacking the device Remove all packaging materials including the film on the front of the unit WARNING Do not let children play with the plastic film There is a risk of asphyxiation Checking package contents When unpacking ensure that the following parts are included DVD player video recorder SCART cable RF antenna cable Remote control 2 x batteries AAA size 1 5 V Operating instructions Guarantee document The remote control Inserting batteries Two 1 5V batteries AAA size are supplied for the remote control gt Open the battery compartment by sliding the panel on the back of the remote control in the direction of the arrow gt Insert the batteries so that the negative end is placed next to the springs gt Close the battery compartment WARNING The batteries supplied should not be charged disassembled thrown into a fire or short circuited Do not expose the remote control to excessive sun light Do not keep it at places with much dust and humidity If swallowed batteries may endanger life For this reason keep the batteries and remote control out of the reach of children If a bat
47. witch back into the TV mode DVD PLAYER VCR MD 80975 CONNECTIONS AND CONNECTION OPTIONS Connecting the television with an antenna cable 200 240V 50 60 Hz RF OUTPUT SET 0 9 SELECT 21 69 OK CONFIRM SETUP END Your DVD player VCR can transmit pictures and sound to the TV via the antenna cable coax aerial cable Please note that without a SCART cable you will not get stereo sound from a TV capable of stereo sound gt Connect the antenna cable to ANT OUT socket of your DVD player VCR and the ANTENNA IN socket of your TV gt Use another antenna cable to connect the ANT IN socket of your DVD player VCR to the antenna socket in the wall Television Back view of your player Tuning the TV to the DVD player VCR s transmitting channel 52 With an antenna connection you have to carry out the following steps gt Press ENTER for longer than 5 seconds to call up the player s test signal In the display RF 52 appears as the unit s factory set transmitting channel You can change this channel using the number buttons gt Tune the TV to the test signal if necessary refer to the TV s manual to do this The TV will search for the test signal as shown on the side two vertical white bars gt When the test signal appears on the TV screen with the remote control of the TV store it under the desired channel number gt Press ENTER for longer than 5 seconds to remove the test signal U
Download Pdf Manuals
Related Search