Home

T-PRINT G0841M(-W)

1. DAY does not appear for more details see page 7 2 0 JourneyStartTime Defines time of journey start in whole hours at range from 0 to 23 h This function enables to print records only from one day i e in actual day or in print of history in day of required print item Journey End Date Use button CHANGE and then buttons A V or gt for setting itself Active function it is possible to disable by button DISABL If function is disabled print of recorded values will not be limited by this function If function is enabled at the same time with function Journey Duration print time period can be limited by time adjusted in item Journey Duration TE LOG G0841M 01 13 14 Illustration of concurrence of function Journey Duration and JourneyStartTime valid only for setting journey duration in hours not in days Example 1 setting of time in item JourneyStartTime is irrelevant 3 00 00 15 7 3 30 00 15 7 4 00 00 15 7 4 30 00 15 7 5 00 00 15 7 5 30 00 15 7 6 00 00 15 7 6 30 00 15 7 7 00 00 15 7 7 30 00 15 7 8 00 00 15 7 8 30 00 15 7 9 00 00 15 7 9 30 00 15 7 10 00 00 15 7 10 30 00 15 7 11 00 00 15 7 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C values recorded in recorder memory JourneyStartTime adjusted to 4 00 Journey Duration is indicated in bold adjusted to 6 hours values to be printed ar
2. 6 2 3 2 Upper AlarmLimit Enables after pressing button CHANGE to set upper temperature limit of proper channel After exceeding the limit alarm delay is counted If specified delay time value is exceeded alarm is activated visually optionally acoustically Value of alarm limit is adjustable at the range 130 to 500 Temperature unit of alarm limit depends on setting of temperature unit in general setting After change of temperature unit adjusted values of alarm limits remain without change Edited digit of alarm limit is indicated from above and below by arrows and it is possible to change it by buttons A or V Shift to another edited digit by button gt Use button STORE to store alarm limit to recorder or button CANCEL to end alarm limit adjustment without storing 18 TE LOG G0841M 01 6 2 3 3 Lower AlarmLimit Adjustment of lower alarm limit is analogical with above setting of upper alarm limit 6 2 3 4 Alarm Delay Enables to set after pressing button CHANGE at the range of 0 to 60 minutes Delay is counted from the moment when measured temperature of proper channel exceeds adjusted alarm limit If temperature during delay counting returns to adjusted limits delay is counted after new exceeding of alarm limits again from the beginning After elapsing of adjusted delay visual optionally audible alarms are activated Edited digit of alarm delay is indicated from above and below by arrows and it is possible to change it by buttons A or
3. At the end of printout always record header is printed Header enables to identify record accordingly to recorder serial number its description its location must be entered before in recorder and date of print Tear off printed out paper over tear edge of the printer Warning if back up battery of internal clock is low and at the same time recorder was not continuously powered from external source time reading may not be valid which is indicated by inverse print of time value 4 3 3 Paper replacement in built in printer Last meter of paper in the roll is marked by coloured strip indicating paper will be finished soon If paper is finished during printout LED on printer shortly blinks in red and LCD reports Load paper Insert new paper in accordance with described procedure below After installation of the new roll of paper press shortly shift button on printer lt and printout will continue After inserting new paper pull gently lever on the lid and release printer lid Pressure roll for paper transport is released from driving gear of printer drive and lid can be opened easily Unwind several centimeters of paper from new role and insert it to paper container thermo sensitive layer outside Unwound paper end must stick out from container Press strongly printer lid to snap audibly to container lock Now it is possible to tear off printed out paper over tear edge of the printer and the lid stays closed Printer is ready to operati
4. information about the current M2MTalk server connection Enabled yes Autologin yes Information about the M2MTalk Address 1234 User usr server connection settings Password psw Server example com Port 9999 8 4 2 7 Setting of the M2MTalk server connection The first word of the message must always be m2mtalk After this keyword parameter values for an actual setting follows in specific order m2mtalk enabled autologin address user password server port e enabled enable the communication via M2MTalk server yes no e autologin automatic login on the server after switching on the modem yes no e address the modem address a numerical value e user the user name for login a text e password the password for login a text e server the M2MTalk server name or IP address a text e port the port number a numerical value An example for setting communication via M2MTalk server will be enabled automatic login after switching on will be deactivated the address will be 2006 m2mtalk yes no 2006 If the trailing parameter values are not entered they will be unchanged Don t enter the square brackets in the SMS message Individual items of the message must be separated by spaces If the modem was logged on the M2MTalk server the modem will be restarted automatically After accepting this command the modem will send back the acknowledge SMS message M2MTalk server parameters wer
5. on the printout as ON or OFF independently on the adjusted description of each state Assignment of ON OFF states to descriptions is printed out in the record header printed lastly Interruption of record caused by configuration of recorder from keyboard or from computer is indicated in printout line with beginning time of record interruption and by reading Interrupted Keyb or Interrupted PC 10 TE LOG G0841M 01 20 04 2008 Chl Ch2 Ch3 Ch4 value recorded in recorder memory p 3 00 00 15 7 5 2 C OFF OFF 3 30 00 16 1 5 1 C OFF OFF b 4 00 00 16 0 5 5 C OFF OFF symbol indicates record of average values 4 30 00 15 6 5 4 C OFF OFF o 5 00 00 5 2 C OFF OFF dots indicate disabled temperature channel 5 27 15 Interrupted PC record interruption logger configuration from PC 6 00 00 14 2 C OFF OFF hyphens indicate value out of the range or no probe 6 12 05 change in binary record 6 30 00 8 5 3 C OFF ON record of actual values without symbol 6 7 00 00 1 4 2 C OFF ON A prints towards older values 7 30 00 7 5 6 C OFF ON lt print start if history record printout is not set newest recorded value from memory is here 4 3 2 4 Data contained in Graph Ticket Graph can be useful for graphic presentation of longer time sections of temperature with simple evaluation of exceeded alarm limits Graph is printed lengthwise always channel by channel Y axis scale must be preset suitably in accordance with expected tem
6. recorder lid and unscrew four corner screws on internal panel Remove carefully the panel with the whole electronics out by pulling of the two demounting holders e remove old battery from the holder by means of a suitable flat screwdriver e insert new battery with correct polarity pole of the battery must be visible from above e push in the panel with electronics back to the case by means of the demounting keys and bottom it out Unscrew demounting keys blind two openings by seals and fix panel with four corner screws e insert fuse to fuse box recorder is now switched on and would start to work e set internal real time clock in recorder from the keyboard or from the computer Liquidate discharged battery ecologically 7 0 Wireless alarm unit G9000 optional accessory 7 1 Basic features of wireless alarm unit Device works as a remote display of temperature recorder G0841 further only recorder Recorder is primarily designed for installation on semi trailer of a truck Thanks to wireless connection alarm unit enables comfortable monitoring of recorder state in a cabin of semi trailer truck After activation of sending function in recorder following values are transmitted to the unit temperature values measured by both temperature channels and information on both binary channels states including alarms on all four channels Data are displayed on a dual line LCD display alarms are indicated by blinking of red LED and by aud
7. start time If both functions are enabled simultaneously in menu of definition printed values from particular time period i e both Journey Duration in hours and Journey Start Time the printout will be stopped after at least one condition is valid If only function Journey Start Time is enabled in menu and journey duration is entered just before printing i e in number of days then adjusted journey start time is relevant only if journey duration is set to one day If adjusted to more days recorded values will be printed back to time 0 00 h of the first journey day If printout of older values is required it is activated by entering date and optionally time of journey end in menu item Journey End Date and Journey End Time see page 14 Above settings for printout of only particular time period are the same also for printing of older values 4 3 2 2 Start of print of recorded values Enter print mode in basic display by pressing PRINT button Offer of printout of Delivery Ticket Journey Ticket or Graph Ticket appears Select one of the offer by buttons A or V After selecting Journey Ticket or Graph Ticket it is enabled by repeated pressing of button DAY to select journey duration form 1 to 7 days Another pressing of button DAY indicated by reading gt 7Day selects unlimited time period of printout After confirmation of Journey Ticket by PRINT button printout is started In case of selection of Graph Ticket you are asked to select r
8. ORE to store edited time to recorder internal clock seconds will be zeroed or button CANCEL to end editing without storing TE LOG G0841M 01 17 6 1 7 Temperature Unit This menu item enables after pressing button CHANGE to select between two temperature units C or F Recorder works with selected temperature unit in measurement value on display record to recorder memory and in alarming adjusted limits Change the used temperature unit by buttons A or V Use button STORE to store selected unit to recorder or button CANCEL to end unit selection without storing 6 1 8 Logging mode Enables to select by means of buttons A or V one of three available logging modes actual when actually measured value is recorded at the moment of logging interval average when average value of temperature measured during adjusted logging interval is recorded Temperature is measured in fixed interval 5 s min max average when average value of temperature measured during adjusted logging interval same as above accompanied by minimum and maximum temperature in logging interval Recorded min and max values are available after data download to computer Printout on built in printer is not enabled Use button STORE to store selected logging mode to recorder or button CANCEL to end logging mode selection without storing 6 1 9 PIN Change This menu item enables user to change anytime four digit PIN code Edited digit is indicated from above and b
9. P67 range 30 to 80 C Connection of temperature probe to terminals with two wire shielded cable Connection of switches to binary channels to terminals two wire shielded cable Maximum conductor area connectable to terminals 2 5 mm2 Maximum length of probe cable 20 m Current through binary channel switches cca 0 3 mA Logging interval of measured values to memory 1 min to 60 min 10 selections Memory capacity 102 400 records each channel both temperature channels enabled 172 032 records if only one temperature channel is enabled Specified number of records is maximum possible and can be achieved only if record from memory erasing was not interrupted by new setting and if logging mode of actual or average values is selected In logging mode average min max values number of records is approximately 3 times lower If binary channels are enabled then every change on binary input causes drop of remaining memory capacity approximately of 0 6 record both temperature channels enabled or of 1 record if only one temperature channel is enabled Communication with computer USB port or built in GPRS modem Real time clock adjustable from the computer integrated calendar including leap years Accuracy of internal clock lt 200 ppm i e 0 02 17 28 s in 24 h Consumption without display illumination models G0841M G0841W not printing approximately 200mW during print 8W maximum Radio frequency of the sender optional accessory 868 MHz unlice
10. RD must blink temperature readings on both channels would correspond to suspected temperature in places of installed temperature probes If both temperatures are the same make sure by heating one of the probes e g by short holding in your hand probe are not changed over Make sure if closing and opening contacts on binary channels e g by door opening closing cause proper reading change on recorder LCD on channel 3 and channel 4 preset symbols are ON and OFF Test printer function by printing e g Delivery Ticket Warning Correct temperature measurement is subject to setting proper correction of probe cable length Factory setting of the probe length corrections if not differently ordered is 5 meters for channel 1 and 20 meters for channel 2 for used cable with conductor area 0 14mm2 For setting see page 21 Nor during mounting of temperature probe cable and during the operation insulation of probe cable must not be damaged In case of short circuit of the temperature probe lead with vehicle frame TE LOG G0841M 01 5 recorder can be damaged If cable insulation of temperature probe is damaged do not connect it to the recorder Cable must be repaired or replaced Recorder connection to source and temperature probes Legend 1 external power source truck vehicle battery 2 fuse box of the vehicle 3 power cable 4 temperature probe 5 cables of binary inputs 6 magnetic door contact 7 mounting anten
11. Setting up the modem for remote access to the recorder using SMS messages To set of respective parameters you can use either the statement SMS messages these cannot be used for some parameters or the program for data loggers GPRS connection must be activated or you can set up the modem via the USB cable If you require receiving of the warning SMS messages from the recorder you will have to set these parameters in the modem at least e sending no sending of the warning SMS messages the factory default is no sending see the chapter 8 4 2 9 Setting of permitting of the alarm SMS messages e phone numbers for the warning SMS messages recipients this list is empty by the factory default see the chapter 8 4 2 11 Adding a phone number for sending of alarm SMS messages Other possible modem settings for access to the recorder using SMS messages can be performed by using the program for data loggers only see the chapter 8 5 But these settings are not vital indispensable for function e phone numbers from which the incoming SMS messages i e the query or the statement SMS messages will be accepted by the modem this list is empty by the factory default so the modem will accept messages from any phone number e the interval for reading from the recorder the factory default is 60s don t change it gratuitously 8 4 Communication via SMS messages It is possible to control and monitor the recorder operation remotely via the specia
12. T PRINT G0841M W Temperature recorder with printer and GPRS modem for external installation on semi trailers Instruction manual CONTENT 1 0 BASIC RECORDER FEATUREG cssscsssssssssssssssscssesssssssssscsssssssessssssencessssssssesssesscsssssseesesees 4 2 0 INSTALLATION OF THE RECORDER e sessesercesssoesescerossesecoesossesoesosoesesossorsesesoesossesoeeosossesossossese 4 3 0 RECORDER CONFIGURATION BEFORE FIRST OPERATION ccsccsssscssssscescsssesscescsesees 7 4 0 USING OF RECORDER 0 0 cssccsssseesceecssccesccscssccssceneescssseneesscsscssessscsscsssseneesesssseneesesssssseesocsscsssees 8 4 1 RECORDER CONTROLS rie a EEA hata aahtin ae i tien thie ce eka eee 8 4 2 BASIC DISPLAY READINGS riste cocsbedeeect caste ov eked Ph cacha ENA EAEE AAE EE E E E E Eea EE EEE Eeeh 9 4 3 PRINTOUT OF RECORDED VALUES ON BUILT IN PRINTER ccccssscccssssececessseeecesseeecseseeecseseeecssaeeeeess 9 4 3 1 Printout of the Delivery Ticket ccc 3ieiisscieestacecctisdetvsestsccecensscceabebsnceesnsbadestesstacdett e E erini nS 9 4 32 Printoutof recorded yale Sprei ain ities Lote E ae E ene E EET 9 4 3 2 1 Selection of values fOr PrintOUt cccccccccccccssccesscecesecessscceesaecseceecseeeeesaeceeaaeceeaeeceeeseaeceeaeeceeneeesas 9 4 3 2 2 Start of print of recorded values ccccccccccesssecesscecsseeesseceeseceeceecseeeeesaecseaeeceeaeecsaeeeeaaeceeaeeceeeeees 10 4 3 2 3 Data contained in numerical table of values Journe
13. V Shift to another edited digit by button gt Use button STORE to store alarm delay to recorder or button CANCEL to end alarm delay adjustment without storing 6 2 3 5 Alarm ON OFF Enables to disable the evaluation of alarms by setting this item to disabled Alarms of this channel then will not be evaluated and adjusted values of alarm limits and alarm delay are irrelevant Change the state of alarm evaluation after pressing button CHANGE Select value enabled or disabled by means of buttons A or V Use button STORE to store alarm evaluation to recorder or button CANCEL to end alarm evaluation adjustment without storing 6 2 3 6 Channel Record Enables to disable proper channel for record e g if temperature probe is permanently disconnected Capacity of recorder memory is then available for another channel At least one temperature channel must be enabled for record It is not allowed to disable both channels at the same time Change the state of channel logging after pressing button CHANGE Select value enabled or disabled by means of buttons A or V Use button STORE to store channel logging to recorder or button CANCEL to end channel logging adjustment without storing 6 2 3 7 Graph Y axis min It is useful for graph print to preset graph Y axis scale in accordance with expected temperature values at monitored room Set minimum of the Y axis scale of the proper channel after pressing of the CHANGE button Value is adj
14. aees 23 6 0 REPLACEMENT OF BACK UP BATTERY 0 cssccsssscscsscsscssssescsscsescensssessscssesssesscsssseneesesees 24 7 0 WIRELESS ALARM UNIT G9000 OPTIONAL ACCESSORY csccssscsssscssessssscsessessesesees 24 7 1 BASIC FEATURES OF WIRELESS ALARM UNIT scccccssssssecesseececesseececeseeeeecesseeeeceseeneecsseeeaecesseeaeeeseenaees 24 7 2 PAIRING OF WIRELESS ALARM UNIT orisi piierne tonr EAEAN REENA AEEA EA AEAN EE EEEREN EAEE E AAAA Enar EAEE 24 8 0 THE BUILT IN GPRS MODEM cssccsssscsscsscsscsscsscsssssscsscssssssenessssssenessecssssssssscsscsssseneesosees 25 8 1 BASIC CHARACTERISTICS OF THE GPRS MODEM cc cccssssssecessseeeeesseececesseeeecesseeeeeeseeeeeceeseeaeeeseenaees 25 8 2 ACCESSORIES NECESSARY FOR THE MODEM OPERATION sssssceessseeeeeseccececeeeeeceeseeaeceseeaaeesseeaaess 25 8 2 1 The electric power supply and GSM antenna ec eeceseeeeeeeeeeeeeeeneeeaeeeaeecsaecaecnaeenseesseenes 25 S22 Dhe SIM Care eE Nestea cas sel even R E a ccc e te nae eeGls aces Mest tE tas ee tere T E E EREE 26 5 23 Programm for data loggers iesen ieee aE hee EEE E a EEIE E E eres 26 S24 The M2MTalk server S nvice metne encerra EEEE EE E NEEE EE EREE A EE aa 26 8 3 PUTTING THE MODEM INTO OPERATION ccsssssscecesssccecssssececseseneecssseceecsseeeeeceeeeeeeesseeeaeceesesaeesseenaess 26 Salk Switching on the Mm demMciiei s i eA EnA EE REA E aE a a i e ease EE E EE E RE 26 8 3 2 Setting up the modem for remote ac
15. arm SMS messages off from number 420123456789 was disabled from the phone number 420123456789 Attention If this setting is performed successfully the response message will be sent not only to sender s phone number but also to all phone numbers for the warning SMS messages recipients If the value to store is the same as the original already stored value executing the command will have no effect In this case the modem will only send back the same information as in the case of Information about the alarm SMS messages 8 4 2 10 Information about phone numbers for the alarm SMS messages If the SMS message alarms without any parameters is sent the modem will send back the SMS message with the list of all phone numbers for the warning SMS messages recipients The list of the alarm phone numbers The list of the phone numbers is empty empty The list of the alarm phone numbers The list contains phone numbers 420123456789 420987654321 420123456789 420987654321 8 4 2 11 Adding a phone number for sending of alarm SMS messages This command is intended for adding the sender s phone number to the list of phone numbers for the warning SMS message recipients The list can contain up to 8 phone numbers After accepting this command the modem will send back the acknowledge SMS message The alarm phone number 420123456789 was The sender s phone number was added added to the list to the list The alarm phone num
16. ately 3400 printed lines 9 2 Instrument passed through tests of electromagnetic compatibility EMC Device conforms in accordance with EN 61326 1 these norms radiation EN 55011 Class B immunity EN 61000 4 2 levels 4 8 kV Class A EN 61000 4 3 intensity of electric field 3 V m Class A EN 61000 4 4 levels 1 0 5 kV Class A EN 61000 4 5 levels 1 0 5 kV Class A EN 61000 4 6 intensity of electric field 3 V m Class A 9 3 Technical support and service of the instrument Technical support and service is ensured by the distributor of this instrument 40 TE LOG G0841M 01
17. ber 420123456789 is The sender s phone number was not number already occurs in the list The sender s phone number was not The list of the alarm phone numbers is already full added to the list the list is already full TE LOG G0841M 01 33 8 4 2 12 Removing a phone number for sending of alarm SMS messages This command is intended for removing the sender s phone number from the list of phone numbers for the warning SMS message recipients After accepting this command the modem will send back the acknowledge SMS message The alarm phone number 420123456789 was The sender s phone number was removed from the list removed from the list The alarm phone number 420123456789 was The sender s phone number was not not contained in the list removed from the list because this number was not found in the list 8 4 2 13 Removing all phone numbers for sending of alarm SMS messages This command is intended for removing all phone numbers from the list of phone numbers for the warning SMS message recipients So the list of phone numbers will be cleared completely After accepting this command the modem will send back the acknowledge SMS message All alarm phone numbers were removed from The list of phone numbers was the list cleared 8 4 3 The alarm SMS messages If sending of the alarm SMS messages is enabled information that the alarm is active and information about correct operation of the receiver can be periodi
18. ble are empty min and max values are not recorded Often the graphic presentation of recorded data can be more suitable Graphs are accessible after data download from the instrument or computer hard disk by selection of menu View Graph Attention If recorder is connected to PC through USB cable i e data download then internal communication between GPRS modem and recorder is restricted That is why alarm SMS can be sent from modem 5 4 Erasing of recorded data Recorded data in recorder can be erased by means of the computer by selection Configuration Erasing of recorder memory or by confirmation the offer during data transfer Data logging works in cyclic mode That is why it is not necessary to erase the data if memory is filled older recorded values are overwritten by newer values 5 5 Upgrade of recorder internal firmware If manufacturer releases newer firmware version FW user can upload FW from computer to recorder by means of USB interface For FW upgrade it is necessary to download file with FW for G0841 recorder gfw from manufacturer s website to connect recorder to the PC and by means of user program upload new FW by selection menu item Service T Print firmware update Then follow instructions from the PC during operation you will be asked to switch recorder to the communication mode for FW upload This is made by the following procedure select recorder menu item ParameterSetting enter and confirm b
19. cally taken from the receiver using the modem These results are processed and then the modem sends alarm SMS messages to a customer according to these analyses The alarm SMS message will be sent if the modem finds out one of these facts e the temperature value exceeds the alarm limit the alarm is active e the binary input state is equal to the chosen state the alarm is active e the recorder memory is full information only recording is still in progress e the real time clock error after power failure when the back up battery is discharged e an error during communication with the recorder when the recorder is malfunctioning If the alarm is active the modem will send following SMS message to the predefined phone numbers Device_location Channel_1_description Value Channel_2_description Value Channel_3_description Value Channel_4_ description Value e device location the user s description of the recorder location is displayed If this description isn t set the serial number of the recorder will be displayed e channel description the user s description of the corresponding channel is displayed If this description isn t set the number of the channel in numerical format will be displayed e g 1 e value measured values of particular channels or current binary inputs states If the value exceeds any alarm limit the exclamation mark will be displayed in front of it e alarm limits the upper alarm l
20. cccssccccesssscccesssececessneeecesseeecssaeeecsssaeeecsssaeeecssaaeeesseaeeeeeas 3 8 4 2 3 Restart Of the MOREM sienes E A AEEA E A EEA E 31 8 4 2 4 Information about the GPRS connection 0 ccccecscceeeseceeseceencecesecesaeceesaeceeaeeceeeeeaeceeaueceeaeeesas 31 8 4 2 5 Setting of the GPRS connection cccceccceesscceesseceeseeceeceesaeceeaeeceeeeecsaeceeaaecseaeeceseeeesaeceeaueceeneessas 31 8 4 2 6 Information about the M2MTalk server CONNECTION c ccscccccceesceesseesseenseeseesseeanecuseeusecneenseeaes 32 8 4 2 7 Setting of the M2MTalk server CONNECTION 1 cccccsessceesseceesceceseceseceeaceceeaeeceeeeeaeceeaaeceeaeensas 32 8 4 2 8 Information about the alarm SMS messages ccesscsseceseceseceseceseceseceseesaeeesaecsaecssecnseceseenseeees 33 8 4 2 9 Setting of permitting of the alarm SMS messages oscscscseseeeererererrssreresrerresreereeressses 33 8 4 2 10 Information about phone numbers for the alarm SMS messages 33 8 4 2 11 Adding a phone number for sending of alarm SMS messages ocscccscccneeererer 33 8 4 2 12 Removing a phone number for sending of alarm SMS Messages 34 8 4 2 13 Removing all phone numbers for sending of alarm SMS Messages 34 S43 Thesalarm SMS messa eSa eiere e Se EAA arse a EE EE T OEE E R RE 34 8 5 SETTING UP THE MODEM USING THE PROGRAM FOR DATA LOGGERG ss cccsssseceeeesseceesesteceeseseeeeess 35 8 5 1 Setting up the modem remotely via GPRS 0 eee ceeceseceseeeseeeeeeeeaeecseeeaeecaaecsaec
21. cess to the recorder from the computer sssseeseeeseseeeeee 27 6 3 2 1 Setting of GPRS connection PAVAMELETS cccccececcceseceesseceenseceecceeaeceeaaeceeaeecseeeeaeceeaueceeaeeesas 27 8 3 2 2 Setting of M2MTalk client parameters ccccccescesecesecesecesecesseeseeeeseeeaeeeseeesaecsaecsesssecsseenseeees 27 8 3 2 3 Login the modem on the M2MTalk servert cccccssccsesceesseceensecescceeseceesaeceeaeeceseeeeaeceeaaeceeaeeesas 27 8 3 3 Setting up the modem for remote access to the recorder using SMS messages esceseeeee 28 8 4 COMMUNICATION VIA SMS MESSAGES cccssssscecesssececesssececssssececesseececseseeeceeseeeesesseeaeceeseeaeeseeenaess 28 8 41 The query SMS messages narioen anos See ee i ie aad ee 28 2 TE LOG G0841M 01 8 4 1 1 The query about the current measured VAIUCS cccceccccesseceenseteseeetseceesceceeaeeceeeeesaeceeaaeceeaeensas 29 8 4 1 2 The query about the current measured values and the alarm settings sosesc 29 8 4 1 3 The query about the modem firmware version ccccsccccsscceesseceeceeesseceececeeaeeceeeeeeaeceeaaeceeneeesas 30 8 4 1 4 The query about the current modem state information 30 8 42 The statement SMS messagesesc ici ccstsssslectatsssectusdeveateestacteets chess stages EE EN EERE nadetieas 30 6 4 2 1 Login on the M2MT Lk server o ecccccescceesseceesscecescceesseceeseceeaeeceeeeecaeceeaaecseaeecseeeeaeceeaaeceeaeeesas 30 8 4 2 2 Logout from the M2M Talk SCrver ccccc
22. d control of recorder is performed from keyboard recorder or by means of computer In both cases setting can be protected by password Recorder is equipped with alarm function Le each 5 seconds independently on adjusted logging interval temperature is measured from both external probes measured value from each channel is compared with two adjustable limits for each channel including signals from binary inputs Limit exceeding is indicated on the LCD display by the red LED and acoustically Alarm evaluation is possible to enable or disable for each channel Audible indication can be also enabled or disabled Measured values recorded in recorder memory can be printed out in table or graph format on built in printer or transferred by means of USB communication cable to personal computer for evaluation Also Delivery Ticket with current temperature value s and header can be printed Recorder is equipped with internal GPRS modem and can be optionally equipped with radio sender for wireless alarm unit G9000 Instrument conforms EN 12830 requirements conditions for class 1 accuracy and is suitable for temperature record during storing S and transport T of food in climate environment code A B Recorder is designed specifically for external installation on semi trailers 2 0 Installation of the recorder Recorder is delivered with installed back up battery for internal clock For instrument operation external power source is necessary ordinari
23. ditions Illumination is activated by pressing any keyboard button and it is automatically switched off after about 30 seconds after the last pressing of the keyboard Function of keyboard upper row buttons is defined by actual description of each button on the lower LCD line display Function of lower buttons is fixed Lower buttons serve always for movement in menu or for change of edited item upwards downwards Controls and LEDs on the recorder panel Legend 1 panel fixing screws 2 panel demounting holders 3 mini USB socket for PC RECORD connection ALARM x 4 green LED indicates record in progress 5 red LED indicates active alarm 6 button for shift of paper 7 safety lock of the printer cover 8 green indication LED GPRS modem powering 9 yellow indication LED GPRS modem status 8 TE LOG G0841M 01 4 2 Basic display readings In basic operation LCD displays actually measured value from all channels date and time of recorder internal clock If logging mode of average values 0 or logging mode of min max average MinMax are selected also symbols indicating these modes record Hyphens on display indicate values outside of instrument measuring range or values sensed with disconnected optionally damaged temperature probe By pressing buttons A or V it is possible to view actually measured values from each channel including user description of the channel By pressing b
24. e to activate the M2MTalk server service For anything else like remote communication with the recorder including data downloading this service must be activated By default this service is not activated by the manufacturer In addition if the M2MTalk server service is used GPRS must be activated on your SIM card 8 3 Putting the modem into operation 8 3 1 Switching on the modem The built in modem is powered from the recorder Therefore when the recorder is installed and switched on the modem will be also switched on at the same time But the inserted SIM card and connection with the external antenna are conditions for its correct working If the modem power supply is on the green LED diode lights up on the front panel The modem will be prepared for communication after cca 1 minute from its switching on It is advisable to check the communication by sending SMS message gsmstatus to the modem phone number A response delivery time is generally dependent on a momentary cellular network load and state If the 26 TE LOG G0841M 01 modem works correctly it will send back SMS message with its state information If you don t receive the response to this SMS message please check your SIM card settings power supply connection and aerial connection 8 3 2 Setting up the modem for remote access to the recorder from the computer If you want to communicate with the recorder by using the computer where the program for data loggers is install
25. e computer but user SW communicates with recorder by means of the virtual serial port Check if adjusted COM port number in driver properties USB Serial Port is at the range COM1 to COM8 program does not support higher port numbers If needed correct the setting open driver features USB Serial Port by pressing right mouse button on this driver in Device manager and by selection of item Properties Select card Port Settings and press button Advanced on the card and select free port at the range 1 to 8 5 2 Recorder configuration by means of personal computer Before starting the recorder operation it is necessary to set recorder parameters and other functions from the instrument keyboard or by means of the PC program Some of the settings are possible to do only from the PC program Recorder connected to the computer is not necessary to power from external source After connection of the recorder to the computer by means of the included communication cable run installed Program for dataloggers Select menu item Configuration Device setting An info window appears with actual recorder configuration Bookmark Logger setting enables all general settings Bookmark Channels enables setting of channels one by one Bookmark Channels also enables setting of the type of temperature sensor Pt1000 or Nil000 and Probe cable length correction Both parameters must be correctly set for both channels from the PC program setting from
26. e indicated by frame A prints towards older values print start if history record printout is not set newest recorded value from memory is here Example 2 setting of Journey Duration is irrelevant 3 00 00 15 7 3 30 00 15 7 4 00 00 15 7 4 30 00 15 7 5 00 00 15 7 5 30 00 15 7 6 00 00 15 7 6 30 00 15 7 7 00 00 15 7 7 30 00 15 7 8 00 00 15 7 8 30 00 15 7 9 00 00 15 7 9 30 00 15 7 10 00 00 15 7 10 30 00 15 7 11 00 00 15 7 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C 5 2 C values recorded in recorder memory Journey Duration is indicated in bold adjusted to 6 hours journey start time adjusted on 8 00 values to be printed are indicated by frame A prints towards older values print start if history record printout is not set newest recorded value from memory is here TE LOG G0841M 01 3 0 Journey End Date Function served for printout of older history values in memory Defines day required values will be printed out Function is available for print of older values stored in memory Use button CHANGE and then buttons A V or gt for setting itself Active function it is possible to disable by button TODAY i e it prints always from actual date and time to the history Function it is possible to use in parallel with functions Journey Duration and JourneyStartTime Function Journey End Date is directly related to function Journey End Time which precisely defi
27. e modem will be restarted Confirm all opened windows with pressing OK button 8 5 2 Setting of the modem connected to computer via the USB cable This way of setting up the modem is the least user friendly use it only when two previous alternatives the statement SMS messages or possibility of GPRS connection using are not available To make the straight interconnection between the built in modem and the computer you must redirect the USB interface of the recorder to the built in modem For this purpose it is necessary to remove the front panel of the recorder according to description in the chapter 2 0 Installation of the recorder and close the jumper The jumper is placed between the back up battery and the built in printer After this the panel must be installed back and the power supply must be connected at last As such recorder is out of order after this step the display doesn t light Interconnect the computer and the recorder via the USB cable In this case the program for data loggers must be run with the parameter service The available way how to achieve it click on the button Start select the item Run then select the item Browse find the program LOGGER EXE in your drive if the destination of this program wasn t changed during installation it will be placed 38 TE LOG G0841M 01 in the directory C Program Files CometLoggers Logger Logger exe select it by using the mouse and click on the button Open In the dis
28. e set and All parameters were set and stored stored correctly An error occurred while setting M2MTalk An error occurred during setting server parameters the parameters Their saving didn t succeed If all values to store are the same as the original already stored values executing the command will have no effect In this case the modem will only send back the same information as in the case of Information about the M2MTalk server connection 32 TE LOG G0841M 01 8 4 2 8 Information about the alarm SMS messages If the SMS message alarms without any parameters is sent the modem will send back the SMS message with information whether sending of the alarm SMS messages is enabled or not Sending of warning messages is switched Sending of the alarm SMS messages o is enabled Sending of warning messages is switched Sending of the alarm SMS messages off is disabled 8 4 2 9 Setting of permitting of the alarm SMS messages If the SMS message alarms on is sent to the modem phone number sending of the alarm SMS messages will be enabled If the SMS message alarms off is sent sending of the alarm SMS messages will be disabled After accepting this command the modem will send back the acknowledge SMS message Sending of warning messages was switched Sending of the alarm SMS messages on from number 420123456789 was enabled from the phone number 420123456789 Sending of warning messages was switched Sending of the al
29. ed remotely you will have to perform following settings 8 3 2 1 Setting of GPRS connection parameters To get information about GPRS connection parameters please contact your mobile operator To set up these parameters you can send a special SMS message to the modem phone number The first word of the message must always be gprs After this keyword parameter values for an actual setting follow in specific order see below gprs apn user password dns If the trailing parameter values are not entered they will be deleted Don t enter the square brackets in the SMS message Individual items of the message must be separated by spaces For more detailed information see the chapter 8 4 2 5 Setting of the GPRS connection The example You can set up the parameter apn to value internet without other parameters user password and dns by sending the SMS message gprs internet 8 3 2 2 Setting of M2MTalk client parameters M2MTalk client is the part of the modem This makes the M2MTalk server service available for the modem and it must be set correctly to be able to access the modem from the computer M2M client parameters are already preset at the factory don t change it gratuitously M2MTalk client parameters can be set via the SMS command see the chapter 8 4 2 7 Setting of the M2MTalk server connection or via the USB cable see the chapter 8 5 2 Setting of the modem connected to computer via the USB cable If you can verify a se
30. elow by arrows and it is possible to change it by buttons A or V Other digits are hidden replaced by symbol asterisk Shift to another edited digit by button gt Use button STORE to store PIN to recorder or button CANCEL to end PIN change without storing Remember new PIN well there is no universal code to unblock the instrument 6 2 6 3 Setting of channel 1 or channel 2 Following parameters concern each channel and can be adjusted separately for each channel Adjusted menu items are identical for both temperature channels Setting of proper channel is indicated at the LCD upper part by symbol of mounting spanner with digit indicating adjusted channel 6 2 3 1 Chan Description Enables to enter description of location of temperature probe for proper channel with 16 characters Description will be visible on each printout from built in printer Edit text after pressing button CHANGE Edited character je indicated from above and below by arrows and change is enabled in alphabetical order by buttons A V Optionally it is possible to swap between capital letters and lower case letter or symbols by means of button 1 A a Space character is first character of symbols and follows after last character of lower case letters z Digits are part of symbols Shift to another edited character in text string by button gt Standard offering STORE to store edited text or CANCEL to end editing without storing are available after pressing button NEXT
31. equired temperature channel Graphic printout of binary channels is not enabled Notice If memory is totally full and printout of oldest recorded values is requested the delay from button pressing to print start can be up to 13 seconds It is caused by searching through a large quantity of recorded data If button DAY after selection of Journey Ticket or Graph Ticket does not appear it means precise setting of journey duration in hours is used menu item Journey Duration see 12 4 3 2 3 Data contained in numerical table of values Journey Ticket Each recorded value or pair of values for two recorded channels is printed in table on separate line together with storing time and temperature unit C or F If recorded value is outside of adjusted limits for proper channel it is printed in table inversely Adjusted delay of alarm is ignored in this case If selected logging mode of average values or logging mode of min max average only average temperature value for interval are printed Such line is indicated in table by symbol p Time value in line in such case indicates end of the interval average value was calculated for Hyphens in printout indicate values outside recorder measuring range or value sensed with disconnected optionally damaged temperature probe If some channel is disabled for record by the user dots are printed out instead of values of proper channel Recorded states of binary inputs are always indicated
32. er switching the mobile phone on you will have to deactivate a PIN code entering This procedure is dependent on a type of the mobile phone and it should be described in a mobile phone s user manual The method of the SIM card installation is described in the chapter 2 0 8 2 3 Program for data loggers Install the paid version of program for data loggers SWRO04 or the database DBL logger program according to making a decision what option you will use from now on the computer from what you want to have access to the recorder The least software version is 2 2 18 0 In all following text the both variants of software will be called as Program for data loggers identically The latest program versions are available on www cometsystem cz Please follow instructions of the installer during installation process If you have activated GPRS data services we recommend using the GPRS connection for setting of the modem in this case installation of any others drivers is not needed If you want to set up the modem by using the USB cable you must also install driver for GPRS modem configuration which is available on above web address too 8 2 4 The M2MTalk server service This service is provided by the modem manufacturer With using the service a fixed IP address does not need be activated on your SIM card this service charge is imposed by the mobile operator If you want to use only the SMS messages for accessing to the recorder you will not hav
33. he fuse protecting truck vehicle battery not directly on truck vehicle battery Mind correct polarity recorder does not work if poles are incorrectly connected but will not be damaged Do not insert fuse yet e pull through carefully temperature probe cable without insulation damage to measured point Locate temperature probes to places with good air circulation Avoid places influenced by local heat sources illuminating lamps etc The best place is the ceiling of the body Due to subsequent calibrations it is also suitable to fix last meters of the cable with temperature sensor the way enabling to remove cable from the holders and put cable to the floor to calibration device e similarly lead cables of door contact or other monitored device from recorder binary channels Shielding of cable on contact side let unconnected e remove seals from glands used for cables pull stripped wire ends through cable glands inward of the case in the following order from left power cable channel 1 temperature probe channel 2 temperature probe cable binary channel 3 cable and binary channel 4 cable Optionally also serial interface RS232 cable see figure page 5 e shorten cables to required length and form them not to be crossed see figure page 5 e strip wire ends of all cables and fit them with closed crimp barrel of suitable diameter included and crimp by proper crimping tool Connect wires including shielding to proper terminals Follow desc
34. imit and the lower alarm limit for particular channels e alarm delay adjusted alarm delays for particular channels in minutes 34 TE LOG G0841M 01 If the user s descriptions are too long and the total SMS message length exceeds 160 characters the serial number of the recorder and the number of the channel will be displayed instead of the user s descriptions An example of the alarm SMS message Vehicle BN CC230 Frozen section 18 7C 18 0 15 0 1m Chilled section 5 2C 3 0 6 0 1m Rear door closed 10m Side door closed 10m Attention Sending of warning SMS messages can be temporarily suspended during the executing of all operations which involve data transfers between the recorder and the remote computer via the built in modem e g downloading data from the recorder In such cases the SMS messages are stored in a queue and are sent after the operation is finished 8 5 Setting up the modem using the program for data loggers The program for data loggers allows not only to work with the recorder but also to set up the built in modem If GPRS connection is available with the modem and your computer is connected to the Internet you will be able to set up the modem remotely wirelessly If these connections are not available please set up the modem remotely via the statement SMS messages And if it s not possible to use the statement SMS messages in some cases you will be able to connect the built in modem in your recorder t
35. io signal Above information is transmitted in 5 minutes interval For more information see Instruction Manual for alarm unit G9000 7 2 Pairing of wireless alarm unit e alarm unit is switched off e in basic display of G0841W recorder press button PAIR Confirm Really New Unit key by OK Record will be for 1 minute interrupted and display shows WaitingForSignal Recorder is now in the reception mode and waits for data from alarm unit 24 TE LOG G0841M 01 e Right now switch on alarm unit up to 5 seconds information on serial number of alarm unit sending pairing signal would appear on the temperature recorder LCD Check if serial number on the alarm unit label is correct and if so confirm new setting STORE key If information on serial number of alarm unit does not appear up to about 10 s repeat switching OFF and switching ON of alarm unit If pairing mode is not ended correctly it is ended up after 60 s automatically e Recorder would up to 10 s send data to selected alarm unit address check the display of alarm unit if hyphens are replaced by measured values and if last four digits of serial number of the correct recorder appear indicated by From e Recorder now sends data every 5 min to the selected alarm unit address Henceforth it is possible to switch OFF and switch ON again the unit without any effect to setting of pairing Pairing information is stored only in the recorder Notice alarm unit works only with recorde
36. is repeated always last time used ticket is offered as first Delivery Ticket Journey Ticket or Graph Ticket to simplify repeated printing 4 3 2 Printout of recorded values 4 3 2 1 Selection of values for printout Recorded values can be printed in table or graph formats Recorded values are printed out always backward from newest values towards oldest If not required and not adjusted printout of older values printout starts with last value recorded in memory How many values from the recorder memory will be printed out is defined by the actual recorder setting If journey has just ended and printout of recorded values from the journey duration is required two basic settings are available which also can be combined A entering of journey duration i e the length of time period to be printed B entering of journey start time i e entering of hour in the day when journey started ad A setting of journey duration is simplified to entering number of days 1 to 7 days in offer just before starting the printout or more precisely but in more complex way in hours in menu item Journey Duration see page 12 ad B for printout in one day only in menu item Journey Start Time it is enabled to enter journey starting hour see page 12 If journey start time is not entered i e function is disabled and TE LOG G0841M 01 9 at the same time journey duration is set in number of days time 0 00 h of last printed day is considered as journey
37. isable channels not to be recorded e g without connected probe e if using alarms set for each temperature channel lower and upper limits and enable alarm e if using alarms set for each binary channel state of binary input to activate alarm and enable alarm e set for each channel delay of alarm e enable or disable audible alarm indication e if suitable enter text description of each channel and location of recorder e if suitable enter desired contain of printout header e if necessary avoid unauthorized setting of recorder by entering password PIN code Recorder is not equipped with power switch After connection to power short initialization is performed and then recorder immediately continuously measures and records Interval between two subsequent measurements is specified by the user The interval can be adjusted from 1 to 60 minutes Memorizing of the first value is synchronized with the internal real time clock so the record is performed at sharp multiples of minutes hours and days E g after starting the record with the 15 minute interval the first value is not stored immediately but after the internal clock gets the status of a quarter a half or a whole hour Warning Connect external probe only to the switched OFF recorder In opposite case incorrect measurement can be recorded to the memory during connecting the probe During setting of record parameters from instrument keyboard or from the computer record is stopped till
38. ivated by pressing any keyboard button and is switched off automatically after 30 seconds 8 0 Language Select This function enables to select one from the maximum 15 languages of recorder menu E g following languages can be selected English German French Italian Polish Dutch Spanish Portuguese Romanian Czech Select language by buttons A or V confirm selected language by button STORE 9 0 Alarm unit This function enables to switch on or switch off the sender of wireless alarm unit optional accessory or to pair recorder with particular alarm unit Press CHANGE button Then buttons A V enable to switch on the sender indicated display serial number of target alarm unit Or buttons A V enable to switch off the sender indicated by reading switched OFF Pairing of recorder with new alarm unit is started after pressing PAIR button For more information on alarm unit see page 23 Notice running of the pairing function from this menu interrupts the measurement and record do not run it for no reason If pairing function is not finished correctly up to 60 s function automatically ends and record continues 16 TE LOG G0841M 01 4 4 2 Menu 6 0 ParameterSetting 6 1 General Setting Menu Item General Setting concerns entire recorder all channels Movement in menu General Setting is indicated in upper part of the display by symbol of a mounting spanner 6 1 1 Logging interval Defines interval for storing of values from both te
39. l SMS messages which are being sent to the modem phone number The user can select phone numbers from which the SMS messages are accepted by the modem Generally SMS command messages aren t case sensitive and the space serves as a parameter separator If the accepted command isn t supported or it hasn t a correct syntax or parameters the modem will send back an SMS message with a proper error description This information will be returned only three times in maximum The fourth and every next incorrect command from the one phone number is ignored until the incoming command will be correct again 8 4 1 The query SMS messages Using these messages you can take the current measured values the modem firmware version and the current modem state information After sending of the particular query SMS message the SMS message with the response to the query will be returned 28 TE LOG G0841M 01 8 4 1 1 The query about the current measured values To take the current measured values send the SMS message values to the modem The modem will send back a SMS message with the following contents Device_location Channel_1_description Value Channel_2_description Value Channel_3_description Value Channel_4_description Value e device location the user s description of the recorder location is displayed If this description isn t set the serial number of the recorder will be displayed e channel description the user s descripti
40. lues is influenced also by 7 00 00 15 7 5 2 C setting of parameter Journey Duration can be set 7 30 00 15 7 5 2 C in number of days or in hours 8 00 00 15 7 5 2 C 8 30 00 15 7 5 2 C 9 00 00 15 7 5 2 C A prints towards older values 9 30 00 15 7 5 2 C 10 00 00 15 7 5 2 C 10 30 00 15 7 5 2 C which value is printed as first is influenced only by 11 00 00 15 7 5 2 C setting of parameter Journey End Date and Journey End Time if printout of older records is not set parametr is set to Today and From Now TE LOG G0841M 01 15 5 0 Info On Setting This function enables to view all recorder settings protected by PIN code Move between setting items by buttons A V Button NEXT enables quick move between General setting selections Setting of channel 1 and Setting of channel 2 6 0 ParameterSetting Access to this menu item is protected by PIN code If PIN is entered correctly record stops till the end of setting mode If recorder stays in setting mode 5 minutes and no key is pressed and no command from the computer is received recorder automatically ends up setting mode and record continues 7 0 Iluminat Level This function enables to change illumination intensity of LCD display from 0 to 100 with 10 step Level 0 means illumination permanently disabled 100 is maximum level of illumination Use buttons A V or gt for setting itself selected level confirm by button STORE Illumination is act
41. ly semi trailer vehicle battery It can be also ac dc adapter type SELV Secured Extra Low Voltage source with limited output current or with overcurrent protection used in stationary operation of the recorder Temperature range of used cables must comply with environmental temperatures in which the logger will be used Installation procedure on semi trailer e open recorder lid and unscrew four corner screws on internal panel Pull up carefully the panel with the whole electronics out by pulling of the two panel holders and disconnect the cable of antenna connector placed on electronic board Carefully place the electronic aside to clear dry and electrically non conductive place e fix the recorder case by means of 4 screws of 5mm diameter and suitable length on desired place of semi trailer Remember screws must endure permanent vibrations during operation e in planning cable routes on semi trailer remember cables must lead to recorder lower side to cable glands Use cables designed for outdoor use Use twin core cable for power with minimal conductor area of 0 75 mm For routing cables use cable channels by sides of the thermo isolating semi trailer if exist All drilled holes must be finally sealed by suitable sealing material e g silicon sealant Freely installed cables must be fixed by suitable cable clips against movement along all route 4 TE LOG G0841M 01 e recorder power cable lead to fuse box and connect it behind t
42. m delays for particular channels in minutes If the user s descriptions are too long and the total SMS message length exceeds 160 characters the serial number of the recorder and the number of the channel will be displayed instead of the user s descriptions An example of the response message Vehicle BN CC230 Frozen section 18 7C 18 0 15 0 1m Chilled section 5 2C 3 0 6 0 1m Rear door closed 10m Side door closed 10m TE LOG G0841M 01 29 8 4 1 3 The query about the modem firmware version To take the built in modem firmware version send the SMS message firmware to the modem The modem will send back a SMS message with the following contents Datalogger Communicator FW_version An example of the response message Datalogger Communicator v 1 1 0 8 4 1 4 The query about the current modem state information To take the current modem state information send the SMS message gsmstatus to the modem The modem will send back a SMS message with the following contents Uptime M2MTalk_online Operator RSSI Signal Registered_on_network Roaming e Uptime elapsed time from the modem s switching on e M2MTalk_online the current M2MTalk server login status e Operator the name of the GSM operator e RSSI the signal strength dBm e Signal the signal quality e Registered_on_network the SIM card registration on the cellular GSM network e Roaming the SIM card registration on the foreign network it says if the roa
43. ming is active An example of the response message Uptime 0d Ohr 26min M2MTalk online yes Operator T Mobile CZ T Mobile CZ RSSI 66dbm Signal 99 Registered on network yes Roaming no 8 4 2 The statement SMS messages Using these messages you can control and set up the modem remotely 8 4 2 1 Login on the M2MTalk server To login the modem on the M2MTalk server you can send a SMS message login to the modem phone number The modem will send back one of folowing acknowledge SMS messages The demand for login on the server was Information about acceptance of accepted demand for login on the M2MTalk server This module is already logged on the The messag the modem was already server n the M2MTalk server Modem startup is still in progress nd can t be processed please try it later modem startup has not yet It is necessary to he command later Logging on the server is already in n t be processed progress m is already logging on Using server is disabled login is not A comma t be processed accepted because communication with M2M server is disabled 30 TE LOG G0841M 01 8 4 2 2 Logout from the M2MTalk server Since the modem is logged on a limited data transferring also proceeds in case the remote communication with the recorder or the modem isn t in progress due to keeping the connection Transferred data is charged as per your GPRS tariff by the mobile operator If
44. mperature channels to internal memory Memorizing of the first value is synchronized with the internal real time clock so the record is performed at sharp multiples of minutes hours and days E g after starting the record with the 15 minute interval the first value is not stored immediately but after the internal clock gets the status of a quarter a half or a whole hour First interval after switching on the recorder or after parameter setting is always shorter Set logging interval by pressing button CHANGE and by selection from preset values by means of buttons A or V Store selected interval by button STORE 6 1 2 Alarm Audio This menu item enables to disable enable audible alarm indication If audible indication is enabled in active alarm state every 10 seconds warning signal sounds Sound is possible to switch OFF temporarily by button AUDIO if new alarm is activated signal sounds again If audible indication is disabled warning signal does not sound 6 1 3 Logger Location Enables to enter description of recorder location with 16 characters Description will be visible on each printout from built in printer Edit text after pressing button CHANGE Edited character je indicated from above and below by arrows and change is enabled in alphabetical order by buttons A V Optionally it is possible to swap between capital letters and lower case letter or symbols by means of button 1 A a Space character is first character of symbols and follow
45. n 8 2 1 The electric power supply and GSM antenna The built in modem is powered from the recorder To work the modem an external GSM antenna must be connected The external antenna is available within the antenna kit QTPRO29 the part of delivery The method of the installation is described in the chapter 2 0 TE LOG G0841M 01 25 8 2 2 The SIM card The SIM card of the mobile operator is necessary for correct modem operation Usually this SIM card permits only restricted access to the recorder by using the SMS messages If you want to communicate with the recorder using full access from the computer e g data downloading GPRS data services will have to be activated too If the recorder is operated in a vehicle it is necessary to have in mind that mobile operators will be allowed to change while crossing borders of various countries If you also want to communicate with the recorder remotely via GPRS in a foreign network you must have activated GSM and GPRS roaming data roaming on your SIM card This service charge is imposed by the mobile operator and you can also find out that it is activated there When in use GPRS roaming mode GPRS transferring prices can be markedly higher than in the case of a home network A PIN code entering must be deactivated on the SIM card Using the SIM card in any mobile phone is the simplest method how to make sure that a PIN code entering is deactivated If a demand for entering a PIN code is displayed aft
46. na set QTPRO29 8 mounting holes diameter 5 5 mm channel 4 binary channel 3 binary channel 2 temperature channel 1 temperature 6 IE LOG G0841M 01 3 0 Recorder configuration before first operation Before first operation it is necessary to set instrument from instrument keyboard or by means of personal computer with installed user software User program is available to download free from www cometsystem cz For recorder connection to the computer included USB cable A B is necessary If recorder setting is performed from the computer recorder is powered via USB interface from computer and no other power source is needed This could be an advantage when recorder is connected to the computer out of its fixed installation When USB powering only is used there is NOT possible to do modem configuration from PC Before measurement it is necessary e configure GPRS modem see chapter 8 e select language of recorder menu only before first use e check optionally set real time in recorder e select unit of temperature measurement C F e select suitable logging interval e select logging mode actual value average value or average value min max e check for each channel optionally set by means of computer type of connected temperature probe Pt1000 or Nil000 and the cable length correction This setting is necessary for correct measurement and is not enabled from recorder keyboard For details see page 21 e d
47. ne numbers are in the list the modem will process the incoming SMS messages from all phone numbers If you add some phone numbers to this list the modem will process the incoming SMS messages only from these selected phone numbers After pressing Add button enter the phone numbers from which you want to send SMS command messages to the modem All phone numbers must have the international format for example 420123456789 After pressing Next gt gt button the window for settings of the alarm SMS messages parameters will be displayed GPRS modem settings SBE Alarms SMS alarm settings Insert phone numbers of warning SMS recipients Vv Send warning SMS Check alarm status 30 s Phone number list Add Phone number in international format e g 012345678901 Use 4 15 digits amp Back Hen Ly Aven x canca The information that the alarm is active and information about correct operation of the data logger can be periodically taken according to the item Check alarm status from the data logger by the modem These information are processed and then the modem sends alarm SMS messages to a customer according to these analyses If you require sending of the warning SMS messages by the modem you will have to tick off the field Send warning SMS and enter the phone numbers for the warning SMS messages recipients After pressing Apply button all settings are stored into the modem and then th
48. nection parameters for the modem here The item Name is intended for user s description of connection choose your own name Fill the item Address with data listed in the card which was delivered with the modem If you want to prevent unauthorized access to your modem recorder you will have to fill the item Secure 36 IE LOG G0841M 01 communication key with your entered password Remember this password well it will have to be entered during setting of the modem later Continue with pressing Modem configuration button Communication with the modem begins If all previous settings are correct a following window will be displayed If not please check the settings described in this chapter GPRS modem settings talkserver m2msensor com E In this window enter Security communication key according to setting in the window M2M port properties If you require the modem s login on the server automatically after its switching on so that GPRS communication can be available you will have to tick off the field Auto login to M2M server Don t change other parameters in this window gratuitously it can cause problem with communication After pressing Next gt gt button the window for settings of phone numbers restriction for communication via SMS messages will be displayed GPRS modem settings TE LOG G0841M 01 37 Communication via SMS messages can be restricted to selected phone numbers only If no pho
49. nes time of print in selected day 4 0 Journey End Time Defines time of recorded value from which towards older recorded values print will be started This function is usable only for print of older values in memory and is enabled or disabled together with function Journey End Date Disabled function is indicated by reading Today i e prints always from actual date and time to the history Use button CHANGE and then buttons A V or gt for setting itself Function Journey End Time is directly related to function Journey End Date which defines date of print start for selected time Example how menu items for print control Journey Duration Journey Start Time Journey End Date Journey End Time influence the printout of recorded values table YOUR COMPANY Example was made with this setting Journey Duration disabled T PRINT G0221 FW 01 40 Journey Start Time 3 00 Ser Num 09970003 Journey End Date Today Location Vehicle BN CC230 Journey End Time From Now Printed 03 04 2009 11 09 Ch1 Frozen section record printout is always ended up by header Ch2 Chilled section 03 04 2009 Chl Ch2 3 00 00 15 7 5 2 C which value is printed as last is influenced also by 3 30 00 15 7 5 2 C setting of parameter Journey Start Time setting is 4 00 00 15 7 5 2 C relevant only for single day intervals 4 30 00 15 7 5 2 C 5 00 00 15 7 5 2 C 5 30 00 15 7 5 2 C 6 00 00 15 7 5 2 C 6 30 00 15 7 5 2 C number of printed va
50. nsed band Modem frequency band 850 900 1800 1900 MHz TE LOG G0841M 01 39 Modem output power Class 4 33dBm 2dB for EGSM850 Class 4 33dBm 2dB for EGSM900 Class 1 30dBm 2dB for GSM1800 Class 1 30dBm 2dB for GSM1900 SIM card type 1 8V or 3V GPRS class multislot class 12 Antenna external 50 ohm SMA connector Protection IP65 Operating conditions Power external source 9 to 32 V dc and back up battery of internal clock 3V CR2032 Power circuit protection fuse T3A Operating temperature range of data logger 30 to 65 C at temperature below 20 C display must not be readable Operating temperature range of built in printer 20 to 50 C Operating humidity range of the instrument 5 to 85 RH without condensation External characteristics in accordance with EN33 2000 3 normal with the specifications NM AEl AN1 ARI BE Working position horizontally or vertically Mounting of instrument 4x screw diameter 5 mm Not allowed manipulation case lid must not be opened protection against water is guaranteed only if case is closed Limit conditions Power external source 36 to 36 V dc Limit temperature range of instrument 30 to 70 C Limit humidity range of instrument 0 to 100 RH Storing conditions temperature 40 to 85 C Dimensions 250 x 242 x 110 mm Weight including battery without probes approximately 1650 g Material of the case PA lid PC Paper for printer width 57 mm length 10 m i e approxim
51. o your computer via USB cable and perform these settings using the program for data loggers 8 5 1 Setting up the modem remotely via GPRS Run the program for data loggers Select the item File Options in the main menu In the window Options select the item M2M connection on the left bar first A following window will be displayed i Options Of x Data storing Communication Data presentation Connection parameters Autodownload Server talkserver m2msensor com Fart M2M connection PC to M2M server PC s M2M address M2M login password Connection test con The items Server and Port are already pre filled don t change it gratuitously Fill the items PC s M2M address and M2M login password with data listed in the card which was delivered with the modem Confirm these settings with pressing Apply button TE LOG G0841M 01 35 Further in the window Options select the item Communication on the left bar A following window will be displayed Options m coM1 E comz Select the item Select port manually and press the button List of ports The window List of communication ports will be displayed In this window press the button Add port The window Add communication port will be displayed List of communication ports Add communication port M2M port properties The window M2M port properties will be displayed Set the con
52. on 12 TE LOG G0841M 01 4 4 Configuration of recorder from built in keyboard 4 4 1 Main menu From main menu are directly available functions of print setting information on record parameters setting setting of LCD illumination level and menu language selection For setting of all other parameters it is necessary to enter 4 digit PIN code Manufacture PIN code is 5555 user can change it anytime Move between menu items by means of buttons A or V Go back to basic display button by means of button Escape Items of main menu 1 0 Journey Duration 2 0 JourneyStartTime 3 0 Journey End Date 4 0 Journey End Time 5 0 Info On Setting 6 0 ParameterSeting 7 0 Iluminat Level 8 0 Language Select 1 0 Journey Duration Defines time period of recorded values to be printed Set journey duration in whole hours at range from 1 to 255 h which represents 10 6 days of printed record in maximum Use button CHANGE and then buttons A V or gt for setting itself Active function it is possible to disable by button DISABL If function is disabled print of recorded values will not be limited by this function If function is enabled at the same time with function JourneyStartTime print time period can be limited by time adjusted in item JourneyStartTime Attention If function Journey Duration is enabled i e duration is set in hours it is not possible to set journey duration in days simplified selection of journey duration is disabled and button
53. on of the corresponding channel is displayed If this description isn t set the number of channel in numerical format will be displayed e g 1 e value measured values of particular channels or current binary inputs states An example of the response message Vehicle BN CC230 Frozen section 18 7C Chilled section 5 2C Rear door closed Side door closed 8 4 1 2 The query about the current measured values and the alarm settings To take the current measured values the alarm settings and the alarm delays of particular channels send the SMS message values to the modem The modem will send back a SMS message with the following contents Device_location Channel_1_description Value Channel_2_description Value Channel_3_description Value Channel_4_ description Value e device location the user s description of the recorder location is displayed If this description isn t set the serial number of the recorder will be displayed e channel description the user s description of the corresponding channel is displayed If this description isn t set the number of the channel in numerical format will be displayed e g 1 e value measured values of particular channels or current binary inputs states If the value exceeds any alarm limit the exclamation mark will be displayed in front of it e alarm limits the upper alarm limit and the lower alarm limit for particular channels e alarm delay adjusted alar
54. perature values at monitored room The scale is set for each channel individually ee eee le oe ee eee i 7 ee Pe Sob EA EES o 2 aoe Se Seo 07 00 13 00 19 00 07 00 13 00 19 00 07 00 01 08 02 08 02 08 02 08 02 08 03 08 03 08 03 08 03 08 04 08 04 08 04 08 2008 2008 2008 2008 2008 2008 2008 2008 2008 2008 2008 2008 Time values are on the X axis One segment always represents six recorded values Figure shows an example of record with 60 minute interval Vertical dashed line is one time segment and refers to nearer i e left time value If recorded values are outside of the selected Y axis scale of the graph curve not be printed at this area Alarm limits of the currently printed channel are presented by two continuous lines without any description alarm limit values are printed out at the end of the header If the curve exceeds the alarm line recorded values are outside of the set limits If alarm limits are set outside of the graph range alarm lines are not be visible TE LOG G0841M 01 11 4 3 2 5 Stopping of printout of Journey or Graph Ticket Printout of Journey or Graph Ticket in progress can be stopped manually anytime by button CANCEL automatically if preset journey duration is printed out already automatically if preset time for print end was exceeded in menu item JourneyStartTime automatically if all recorded values are printed out already
55. played field Open write the char space followed by parameter service at the end of displayed path past the quotation mark Then click on the button OK After program start the submenu Service should appear in the main menu Select the item M2M modem in the submenu Service Choose the correct COM port number and confirm it with pressing OK button Now you can set up all modem parameters similarly to the previous chapter 8 5 1 Setting up the modem remotely via GPRS Lastly removing the jumper in the recorder is necessary again This way USB interface will be redirected back to the recorder The recorder will start working again after connecting to the power supply 9 0 Technical parameters 9 1 Technical parameters of the recorder Measuring range of the RTD Pt1000 3850ppm input 90 to 260 C Measuring range of the RTD Nil000 6180ppm input 50 to 250 C Certified range in accordance with EN12830 50 to 50 C Resolution 0 1 C F for F is in interval 130 to 100 F resolution 1 F Accuracy of temperature inputs without probes valid both for inputs Pt1000 and Nil000 0 2 C in full range Accuracy of the instrument with connected temperature probe is defined by the above input accuracy and accuracy of the used probe Temperature unit C or F Maximum length of the probe cable 10 m Type of connectable probe with RTD sensor Pt1000 3850 ppm or Nil000 6180 ppm Recommended probe Pt1000TR160 0 probe with protection I
56. r Text 16characters max e g company name 6 1 5 Set Date 25 09 2008 6 1 6 Set Time 15 11 Hour 6 1 7 Temperature Unit C F 6 2 Ch1 Setting 6 3 Ch2 Setting 6 4 Ch3 Setting 6 5 Ch4 Setting TE LOG G0841M 01 6 1 8 Logging Mode Actual Values Average Interval Min Max Average 6 1 9 PIN Change 6 2 1 Chan Description 16 characters max 6 2 2 Upper AlarmLimit xxx x C F adjustable 130 to 500 6 2 3 Lower AlarmLimit xxx x C F adjustable 130 to 500 6 2 4 Alarm Delay 0 60 min 6 2 5 Alarm ON OFF Enable Disable 6 2 6 Channel Logging Enable Disable 6 2 7 Graph Y axis min Xxx x C F adjustable 130 to 500 6 2 8 Graph Y axis max Xxx x C F adjustable 130 to 500 6 3 1 All items identical with Ch1 Setting to 6 3 8 6 4 1 Chan Description 16 characters max 6 4 2 StateOFF Dscrptn 8 characters max 6 4 3 State ON Dscrptn 8 characters max 6 4 4 Alarm Delay 0 60 min 6 4 5 Alarm ON OFF Enable Disable 6 4 6 Channel Logging Enable Disable 6 4 7 Alarm Active If ON description OFF description 6 5 1 All items identical with Ch3 Setting to 6 5 7 21 5 0 Functions of the recorder connected to the PC 5 1 Installation of program for personal computer Installation program is common for both versions of user program i e basic freeware and optional paid Installed user program during first run asks installation code if code is entered program runs as optional version If installation code is not entered p
57. r models G0841W optionally GO841MW which are equipped with wireless radio sender 8 0 The built in GPRS modem 8 1 Basic characteristics of the GPRS modem The modem is intended for remote communication with the recorder via cellular network GSM In light of a customer this way of communication offers the same functions like a direct connection between the recorder and the computer by using a cable The computer must be connected to the Internet The modem can be set and controlled with a program for data loggers and also with SMS messages but with restrictions It is possible to select phone numbers from which SMS messages are accepted by the modem These are possibilities of usage the program for data loggers e setting up the recorder remotely via the modem e downloading data from the recorder via the modem e reading of current values from the recorder via the modem e setting up the modem remotely via GPRS networking e setting up the modem locally via the USB cable These are possibilities of usage the SMS messages e receiving of the alarm SMS messages to preconfigured phone numbers in case of beyond the set alarm limits for each channel also including the binary inputs e receiving of the alarm SMS messages to preconfigured phone numbers in case of the recorder error e getting of the current measured values from the recorder e setting up the modem remotely with restrictions 8 2 Accessories necessary for the modem operatio
58. ription at the bottom of the case Careless crimping of the barrels or not using crimp barrels can cause subsequent accidental measurement failures e tighten the glands to fix and protect cables against water Unused glands must be stopped up by included seal and also tighten e external antenna GPRS modem screw at the suitable place so that the antenna mounting bracket is not electrically connected to conductive parts of the vehicle body that are connected to the battery When installing make sure the minimum distance between the antenna and recorder to prevent his interference Distance between recorder and antenna mustn t be less than 0 5 m There is recommended distance at least of 1 m Use antenna mounting bracket with rubber dowel which is included into antenna kit QTPRO29 together with 3 m cable Plug the antenna cable connector to the recorder and tighten the nut Fix the cable with suitable mounting clip e for GPRS modem using there is necessary to use SIM card This SIM card must be WITHOUT PIN code see chapter 8 SIM card holder is placed on electronic board Insert SIM card in right orientation and close the holder e push in the panel with electronics back to the recorder case and fix panel with four corner screws e insert fuse to fuse box recorder is now switched on and would start to work e verify correct recorder function display would be illuminated always only 30 seconds after pressing a key and green LED diode RECO
59. rogram se runs in basic version Installation code can be entered anytime later Installation program is available for free at the Internet address www cometsystem cz or can be ordered on the CD as the optional accessory e installation from the Internet visit www cometsystem cz and click to link Programs Download Program for dataloggers Comet to your computer If you are going to run program on a PC with older operating system Windows98 or ME download also item USB adapter driver optionally also with file with installation description After running downloaded file logger exe follow the Installator instructions e installation from installation CD Insert installation CD to CD ROM drive and wait for automatic Installator run If Installator is not run automatically depends on setting of operating system find in file browser file CDSetup exe in main directory of the installation CD and click to run Follow Installator instructions Select Program for dataloggers from the menu In both cases tick during installation offered selection Install driver for USB adapter valid only for Windows2000 and newer operating systems Older operating systems require driver installation after first recorder connection to the PC Driver installation procedure and troubleshooting of optional problems is described for each operating systems in USBxxxx pdf file on the installation CD and also at the website Recorder is connected to USB interface of th
60. s after last character of lower case letters z Digits are part of symbols Shift to another edited character in text string by button Standard offering STORE to store edited text or CANCEL to end editing without storing are available after pressing button NEXT 6 1 4 Header Text Can contain e g your company name and it is printed out always at the first line of the header of the printout of measured values Edit text after pressing button CHANGE Editing is identical as in item Logger Location see above 6 1 5 Set Date If there is a need to change the date in recorder internal clock enter editing mode by button CHANGE Edited digit is indicated from above and below by arrows and it is possible to change it by buttons A or V Instrument does not allow to set values outside of interval 01 to 31 for day and 01 to 12 for month Shift to another edited digit by button gt Only two last digits in range 00 to 99 are editable in year indication Use button STORE to store edited date to recorder internal clock or button CANCEL to end editing without storing 6 1 6 Set Time If there is a need to change the time in recorder internal clock enter editing mode by button CHANGE Edited digit is indicated from above and below by arrows and it is possible to change it by buttons A or V Instrument does not allow to set values outside of interval 00 to 23 for hour and 00 to 59 for minute Shift to another edited digit by button D gt Use button ST
61. saecaeenaeenseeees 35 8 5 2 Setting of the modem connected to computer via the USB cable eee eee eeseceseceseceneeeseeees 38 9 0 TECHNICAL PARAMETERS kocsis csssesssccssccnscesccssesecsscssscsscssesscssssencescsessenecsecsssssesssesscsssseneesosees 39 9 1 TECHNICAL PARAMETERS OF THE RECORDER ccscsssesssseeesecsesessaececececsesessaaeceeeeeesesssssaeeeseceesensaaeas 39 9 2 INSTRUMENT PASSED THROUGH TESTS OF ELECTROMAGNETIC COMPATIBILITY EMC 0 0000000 40 9 3 TECHNICAL SUPPORT AND SERVICE OF THE INSTRUMENT ccsecsccssececsesessaeeesecsceessnssseeeeecsesensnaeas 40 TE LOG G0841M 01 3 Instruction manual for Temperature recorder with printer G0841M 1 0 Basic recorder features Recorder is built in a durable plastic case with transparent lid Instrument is designed for temperature measurement and record from up to two external temperature probes and two binary signals from external contacts it records time of monitored event e g door opening closing Measured temperature value from both channels and actual binary inputs states are displayed on dual line illuminated LCD display and are recorded in adjustable time interval to internal non volatile memory Recorded values will not be lost even in disconnection instrument from power Record of actual or average values is user selectable including minimum and maximum temperatures If memory is fulfilled oldest recorded values are overwritten with new values Setting an
62. settings 8 4 2 5 Setting of the GPRS connection The first word of the message must always be gprs After this keyword parameter values for an actual setting follows in specific order gprs apn user password dns e apn the access point name e user the user name for login e password the password for login e dns the DNS server name or IP address An example for setting of the parameter apn to the value internet gprs internet If the trailing parameter values are not entered they will be deleted Don t enter the square brackets in the SMS message Individual items of the message must be separated by spaces If the modem was logged on the M2MTalk server the modem will be restarted automatically After accepting this command the modem will send back the acknowledge SMS message TE LOG G0841M 01 31 GPRS parameters were set and stored All parameters were set and stored correctly An error occurred while setting GPRS An error occurred during setting parameters the parameters Their saving didn t succeed If all values to store are the same as the original already stored values executing the command will have no effect In this case the modem will only send back the same information as in the case of Information about the GPRS connection 8 4 2 6 Information about the M2MTalk server connection If the SMS message m2mtalk without any parameters is sent the modem will send back the SMS message with
63. the recorder keyboard is not enabled Incorrect setting causes incorrect temperature measurement Standard sensors of the delivered probes are Pt1000 specified on the probe label For the correction of probe cable length it is necessary to enter probe cable length specified on the probe label and the conductor area of the cable wires For standard probes Pt1000TR160 the conductor area of the cable wires is 0 14mm 22 TE LOG G0841M 01 After correct entering of parameters store new setting to the recorder by clicking Write to logger button 5 3 Reading of recorded data For recorded data download from recorder to the computer connect instrument to the computer by means of the communication cable and run user program Select menu item File From recorder confirm offered file name and click to Store It is also possible here to enter suitable description of file with recorded data and select if memory of recorder after data transfer will be erased or recorded data remains in memory Data transfer to the computer follows After finishing table of recorded values appears Analogous way enables to open archived recorded data file in the computer anytime Use menu item File From disk and select required file Hyphens instead of measured values in the table indicate values outside of the measuring recorder range optionally not connected temperature probe If min max average record is not selected columns Min and Max for both channels in the ta
64. the setting mode is left If recorder stays in setting mode 5 minutes and no key is pressed and no command from the computer is received recorder automatically ends up setting mode and record continues Demount recorder panel only if power is OFF In opposite case incorrect measurement can be recorded to the memory during connection If recorder is powered only via USB interface from the computer printout on built in printer is disabled because supplied energy is not sufficient for print TE LOG G0841M 01 7 4 0 Using of recorder 4 1 Recorder controls Instrument is controlled by the user by means of built in five button keyboard and graphic display Important information on recorder state is also indicated by green and red LEDs and enable user to watch recorder from longer distance and at the dark Blinking green LED RECORD indicates record in progress blinking red LED ALARM indicates active alarm i e one or both temperatures are outside of adjusted limits or one or both binary channels are in alarm state Two LEDs at bottom panel indicates GPRS modem activity Green one indicates correct powering yellow one indicates modem status Built in printer is equipped with paper shift button and dual coloured LED which is OFF in usual operation During printout or printer initialization LED blinks green if printer is out of paper LED blinks red Recorder is equipped with illumination of display and keyboard for the operation in worse light con
65. tting compare it with data listed in the card which was delivered with the modem 8 3 2 3 Login the modem on the M2MTalk server If you intend to use remote communication with the recorder via GPRS for example to set up the modem or the recorder remotely the modem always must be logged on the M2Mtalk server before starting the communication The modem can be set up to login on the server automatically after its switching on but it isn t a standard factory setting To login the modem on the M2MTalk server you can send a SMS message login to the modem phone number The modem will send back an acknowledge SMS message It is advisable to check the login status by sending SMS message gsmstatus to the modem phone number If the modem works correctly it will send back SMS message with information The login status is also including in these information M2MTalk online yes For more detailed information see the chapter Communication via SMS messages 8 4 1 4 and 8 4 2 1 Attention Since the modem is logged on a limited data transferring also proceeds in case the remote communication with the recorder or the modem isn t in progress due to keeping the connection Transferred data is charged as per your GPRS tariff by the mobile operator Around 26 TE LOG G0841M 01 27 kB of data per day are transferred for keeping connection purposes If the full up recorder memory is about to be downloaded around 1162 kB of data are transfered 8 3 3
66. ustable from the range 130 to 500 temperature unit is defined by set temperature unit in general setting After temperature unit change the set value of the Y axis scale remains the same Edited digit of scale value is marked by arrows from below and above and can be changed by A or V buttons Shift to next edited digit by button gt Press button STORE to save new Y axis scale value to recorder Press button CANCEL to leave without saving changes 6 2 3 8 Graph Y axis max Here it is possible to preset maximum of the Y axis scale of the proper channel in analogical way as described above 6 4 6 5 Setting of channel 3 or channel 4 Following parameters concern channels 3 and 4 and can be set variously for each channel Adjustable menu items of both binary channels are identical Setting of proper channel je indicated in display upper part by symbol of mounting key with digit indicating channel under setting 6 4 5 1 Chan Description is carried out identically as with temperature channels see setting 6 2 3 1 above TE LOG G0841M 01 19 6 4 5 2 StateOFF Dscrptn Here it is possible to enter description of binary state OFF i e switch opened of proper binary channel in 8 characters length Description will be visible on display and in header of each printout from built in printer It is possible to edit text after pressing button CHANGE Edited character is marked from above and below by arrows and is editable in alphabetical order by b
67. utton MENU recorder goes to mode of viewing items of main menu By button PRINT it is possible to start the printout of recorded values on built in printer The middle button has dual function serves for fast pairing of the recorder with wireless alarm unit G9000 PAIR and also for muting temporarily audible alarm indication AUDIO This button function is active only if new alarm is activated When audible alarm indication is muted by pressing AUDI button function of the middle button changes again to PAIR In this case audible indication is activated again if new alarm appears For more information on pairing see page 23 Running alarm state is indicated on display by inverse reading ALARM together with information which channel activated the alarm 4 3 Printout of recorded values on built in printer 4 3 1 Printout of the Delivery Ticket Delivery Ticket is a short form serving as a document for delivery of transported goods It contains recorder identification date and time of the printout and current measured temperature values from both channels At the lower part there is a space for signature of the responsible person Start printing of Delivery Ticket from basic display by pressing PRINT Then offer of Delivery Ticket Journey Ticket or Graph Ticket printing is displayed Select by means of the arrow buttons A or V one of the offered item Confirm Delivery ticket by pressing PRINT and Delivery ticket is printed out When request for print
68. uttons A V Optionally it is possible to switch easily between lower and upper case letters or symbols by means of button 1 A a Space is the first character of symbols and follows the last character of lower case alphabet z Digits are the part of symbols Move to another edited character in text string by button gt Standard offer STORE for saving edited text or CANCEL to exit editing without saving is available after pressing button NEXT 6 4 5 3 State ON Dscrptn Here it is possible to enter description of binary state ON i e switch closed of proper binary channel The procedure is identical with above description of state OFF 6 4 5 4 Alarm Delay The procedure is identical as with temperature channels see setting 6 2 3 4 above 6 4 5 5 Alarm ON OFF The procedure is identical as with temperature channels see setting 6 2 3 5 above 6 4 5 6 Channel Logging The procedure is identical as with temperature channels see setting 6 2 3 6 above 6 4 5 7 Alarm Active If If alarm of proper binary channel is in use it is necessary to set which binary state ON or OFF will activate the alarm Set this after pressing button CHANGE Switch between values ON and OFF by means of buttons A or V If binary state description was entered before corresponding description is displayed for easy orientation when switching states ON and OFF Save new setting to the recorder by button STORE or leave the mode without sa
69. ving by button CANCEL 20 TE LOG G0841M 01 4 4 3 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 Structure of menu Journey Duration xx Hour Disable 1 255hours i e 10 6 days controlled by buttons TIME and DISABL JourneyStartTime xx 00 Hour Disable 0 23hours controlled by buttons TIME and DISABL Journey End Date xx xx 20xx Today 1 1 2000 31 12 2099 controlled by buttons DATE and TODAY Journey End Time xx 00 Hour From Now 0 23hours activated analogically with previous selection Info On Seting Submenu only viewing of adjusted parameters ParameterSetting Submenu protected by PIN stops the record after completion of setting resets the recorder Iiluminat Level 0 100 Language Select 15 selections maximum Alarm Unit Disable serial number of target alarm unit 5 1 General Setting 5 1 1 Logging Interval Alarm Audio 5 1 2 MemoryOccupation Logging Mode 5 1 3 Temperature Unit Logger Type 5 1 4 Logger Location Header Text 5 1 5 Ser Num FW vers Menu Vers PC Driver State 5 2 Setting Of Channel 1 5 2 1 Upper AlarmLimit Lower AlarmLimit 5 2 2 Alarm Delay Alarm ON OFF 5 2 3 Sensor Type Channel Logging 5 3 Setting Of Channel 2 5 3 1 Upper AlarmLimit Lower AlarmLimit 5 3 2 Alarm Delay Alarm ON OFF 5 3 3 Sensor Type Channel Logging 6 1 General Setting 6 1 1 Logging Interval 1 2 3 4 5 10 15 20 30 60 min 6 1 2 Alarm Audio Enable Disabled 6 1 3 Logger Location 16characters max vehicle number 6 1 4 Heade
70. y PIN code in setting menu indicated by symbol of a spanner simultaneously press and hold buttons A V and the middle button display reading is indifferent after pressing keys while holding pressed three buttons press button END recorder display switches off and green LED RECORD switches on permanently now it is possible to release buttons next step is to press NEXT button on the computer Firmware transfer will start During upload do not disconnect recorder power nor press any button TE LOG G0841M 01 23 itis possible to leave FW upload mode if data transfer from the PC was not started yet by pressing right upper button below LCD green LED switches off recorder initialization runs and recorder switches to basic display green LED starts to blink If upload proceeds correctly the FW upload mode will be cancelled automatically from the PC after finishing the operation Attention menu item Service is available in program only if program is run with parameter servis 6 0 Replacement of back up battery If back up battery of internal clock is low and at the same time instrument was not continuously powered from external source time reading is not valid This is indicated by inverse printout of time value Used battery is button battery 3 V type CR2032 located in holder under instrument bottom cover Replacement procedure e disconnect recorder from power e g by removing fuse from truck fuse box e open
71. y Ticket 10 4 3 2 4 Data contained in Graph Ticket cccccccccccssccesssceesseceessecesceceeneeceuececsaecseaeeceeeeecsaeceeaaeceeaeeceneeees Il 4 3 2 5 Stopping of printout of Journey or Graph Ticket 0 ccccccsseceseceesseceeseeececeseeeeseceeaaeceeeeeenseeees 12 4 3 3 Paper replacement in built in printer ee eeeeeeeeeeeeaeecseecsaecsaeceaecnsecsaeeseesseeeseeesneesaes 12 4 4 CONFIGURATION OF RECORDER FROM BUILT IN KEYBOARD ccsscceceesseceeeeeececeeaaececnssaeeeeseaaeeeeeeaes 13 Al Mainsmienu 3 s 2026 orcad pans eae ate ete athe ee ace aint lent ue ast lee 13 AAD Menu 6 0 Pardmeters eta os izceslscstec Sele ccthe edu ia ee ea R E ee debe ndcbeceeeccto Ee enia 17 AAS SMUCUULE OF MENU aeneo e e E E E E Sea sade Be EE E E EE ee abe geaneace ese lve e ites 21 5 0 FUNCTIONS OF THE RECORDER CONNECTED TO THE PCu 0 ccsccsssscsscsssscssssenesesees 22 5 1 INSTALLATION OF PROGRAM FOR PERSONAL COMPUTER csssssssseesssscecesseececeseeeeeceeeeeaeceseeeaeesseenaees 22 5 2 RECORDER CONFIGURATION BY MEANS OF PERSONAL COMPUTER cssssssseseeeeeecesseeeecessenaeeeseenaees 22 5 3 READING OF RECORDED DATA ramii sistas iE Siac doses a sa edes bua ANTEE Geeta alee cbets EE R 23 5 4 ERASING OF RECORDED DATA ccsessscssesecsessssssecesecsessssuececeeecsenessaaecesececsesesaaeeeeceseeesesasaeeeseceeseneaaeas 23 5 5 UPGRADE OF RECORDER INTERNAL FIRMWARE cccsssccesssscecesssececeeseceecsesenceceseeaeecsseeeaecsseeaaeesseea
72. you intend to use remote communication via GPRS no longer you can logout the modem from the M2MTalk server to reduce transferred data To logout the modem from the M2MTalk server you can send a SMS message logout to the modem phone number The modem will send back one of folowing acknowledge SMS messages The demand for logout on the server was Information about acceptance of accepted demand for logout from the M2MTalk server This module is not logged on the server The messag the modem wasn t logged on the M2MTalk server Modem startup is still in progress A command can t be processed please try it later because modem startup has not finished yet It is necessary to repeat the command later 8 4 2 3 Restart of the modem This command is intended for the remote restart of the modem for example in the event of the problem with GPRS connection The complete restart of the modem takes about 2 minutes To restart the modem you can send a SMS message restart to the modem phone number The modem will send back the acknowledge SMS message The demand for application restart was Information about acceptance of accepted demand for restart of the modem 8 4 2 4 Information about the GPRS connection If the SMS message gprs without any parameters is sent the modem will send back the SMS message with information about the current GPRS connection APN internet User Password DNS Information about the GPRS connection

T-PRINT G0841M(-W)

Contents

Download Pdf Manuals

Related Search

Related Contents