Manual - GOED licht en geluid
Contents
1. os Open F 5 Gobo wheel 1 no function Gobo Forwards gobo rotation from fast to slow rotation Gobo rotation stop Backwards gobo rotation from slow to fast 09 EJ UNPACKING Thank you for choosing our MINISPOT 50 For your own safety please read this manual before installing the device This manual covers the important information on installation and applications Please install and operate the fixture with following instructions Meanwhile please keep this manual well for future needs The MINISPOT 50 is made of a new type of high temperature strength of engineering plastics and cast aluminum casing with nice outlook The fixture is designed and manufactured strictly following CE standards complying with international standard DMX512 protocol It s available independently controlled and linkable with each other for operation And it is applicable for large scale live performances theater studio nightclubs and discos The MINISPOT 50 adopts a 50W white LED lamp which features high brightness and stability Please carefully unpack it when you receive the fixture and check whether it is damaged during the transportation And please check whether the following items are included inside the box USA Standard Euro Standard UK Standard Te rd lt wel L Moving Head TPC Signal Cable 1PC Power Cable TPC BEEP TS AAFP Power Out 1PC Hang2. EL MAINTENANCE AND CLEANING The following points have to be considered during the inspection 1 All screws for installing the devices or parts of the device have to be tightly connected and must not be corroded 2 There must not be any deformations on the housing color lenses fixations and installation spots ceiling suspension trussing 3 Mechanically moved parts must not show any traces of wearing and must not rotate with unbalances 4 The electric power supply cables must not show any damage material fatigue or sediments Further instructions depending on the installation spot and usage have to be adhered by askilled installer and any safety problems have to be removed CAUTION Disconnect from mains before starting maintenance operation In order to make the lights in good condition and extend the life time we suggest a regular cleaning to the lights 1 Clean the inside and outside lens each week to avoid the weakneness of the lights due to accumulation of dust 2 Clean the fan each week 3 Adetailed electric check by approved electrical engineer each three month make sure that the circuit contacts are in good condition prevent the poor contact of circuit from overheating We recommend a frequent cleaning of the device Please use a moist lint free cloth Never use alcohol or solvents There are no serviceable parts inside the device Please refer to the instructions under Installation instruc
3. 512 CONTROL CONNECTIONS Connect the provided XLR cable to the female 3 pin XLR output of your controller and the other side to the male 3 pin XLR input of the moving head You can chain multiple Moving head together through serial linking The cable needed should be two core screened cable with XLR input and output connectors Please refer to the diagram below DMX 512 connection with DMX terminator DMX OUT DMX IN Fuse POWER IN Power Switch l HAIT NN f A A Z _ POWER IN DMX IN DMX Output DMX Input DMX512 OUT DMX512 IN 3 Pin XLR Socket 3 Pin XLR Socket 3 PIN XLR 3 PIN XLR Specifications Input Voltage AC90 260V 50 60Hz LED Quantities 1 50W white LED Control Signal DMxX512 master slave and sound activated or auto operation Control Channel 11 13 DMX channels USITT DMX 512 Power Consumption 55W Dimensions 149 D 270 W 366 H mm Packing Dimensions 350 D 450 W 240 H mm Net Weight 6 6kg Gross Weight 7 6kg C O E PHOTOMETRIC DATA ED Photometric Beam Angle Data 17 9 Beam Angle LUX x 0 0929 FC 1254 312 152 977 46 FC 13500 3360 1640 1040 490 LUX Om 2 5m 5m 7 5m 10m 15m 20m eee o 40 5 9 81 5 123 2 164 5 264 n 04 Eq OPERATION INSTRUCTIONS The MINISPOT 50 is for spot effect for on site decoration purpose Don t turn on the fixture if it s been through severe temperature difference like after transportation because it might damage the
4. crimped or damaged by sharp edges If this would be the case replacement of the cable must be done by an authorized dealer Always disconnect from the mains when the device is not in use or before cleaning it Only handle the power cord by the plug Never pull out the plug by tugging the power cord IMPORTANT Damages caused by the disregard of this user manual are not subject to warranty The dealer will not accept liability for any resulting defects or problems During initial start up some smoke or smell may arise This is anormal process and does not necessarily mean that the device is defective it should decrease gradually Please don t project the beam onto combustible substances Fixtures cannot be installed on combustible substances keep more than 50cm distance with wall for smooth air flow so there should be no shelter for fans and ventilation for heat radiation If the external flexible cable or cord of this luminaire is damaged it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard 01 10 EE DMX CHANNELS Mode Channel Function Values Description aee e 2 Pan fine 0 255_ Fine control of Pan movement a Tiltfine 0 255 Fine control of Titt movement max to min speed 5 3 Speed 226 235 blackout by movement pan tilt 236 245 blackout by all wheel changing 246 255 no function 4 Color wheel
5. light due to the environment changes So make sure to operate the fixture until it is in normal temperature This light should be keep away from strong shaking during any transportation or movement Don t pull up the light by only the head or it might cause damages to the mechanical parts Don t expose the fixture in overheat moisture or environment with too much dust when installing it And don t lay any power cables on the floor Or it might cause electronic shock to the people Make sure the installation place is in good safety condition before installing the fixture Make sure to put the safety chain and check whether the screws are screwed properly when installing the fixture Make sure the lens are in good condition It s recommended to replace the units if there are any damages or severe scratch Make sure the fixture is operated by qualified personnel who knows the fixture before using Keep the original packages if any second shipment is needed Don t try to change the fixtures without any instruction by the manufacturer or the appointed repairing agencies It is not in warranty range if there are any malfunctions from not following the user manual to operate or any illegal operation like shock short circuit electronic shock lamp broke etc Never stand directly below the device when mounting removing or servicing the fixture from a ceiling or set on a flat level surface see illustration below Be sure this fixtur
6. e is kept at least 0 5m 1 5 ft away from any flammable materials decoration etc Always use and install the supplied safety cable as a safety measure to prevent accidental damage and or injury in the event the clamp fails Mounting points Overhead mounting requires extensive experience including amongst others calculating working load limits a fine knowledge of the installation material being used and periodic safety inspection of all installation material and the fixture If you lack these qualifications do not attempt the installation yourself Improper installation can result in bodily injury Be sure to complete all rigging and installation procedures before connecting the main power cord to the appropriate wall outlet Clamp Mounting MINISPOT 50 provides a unique mounting bracket assembly that integrates the bottom of the base and the safety cable rigging point in one unit see the illustration below When mounting this fixture to truss be sure to secure an appropriately rated clamp to the included omega bracket using a M10 screw fitted through the center hole of the Hanging Kit As an added safety measure be sure to attached at least one properly rated safety cable to the fixture using on of the safety cable rigging point integrated in the base assembly Hanging Kit Satety Clamp Safety Cable Screw E INSTALLATIONS Cautions For added protection mount the fixtures in areas outside walking paths
7. ing Kit LPC Safety Cable 1PC User Manual IL PAC 02 KE FEATURES amp SPECIFICATIONS Features e A50W white LED lamp 50000 hours life span and low power consumption 8 16 bit smooth and precise resolution for PAN TILT movement 360 540 630 PAN and 90 180 270 TILT movement Scan position memory auto reposition after unexpected movement Specific optic system with 11 9 projection angle Improved optics and flat beam field 1 rotatable gobo wheel with 6 rotatable and interchangeable gobos plus open with speed adjustable stream effect dithering effect and rotatable clockwise or anticlockwise Gobo size 21 8mm external dimensions 14 5mm inner dimensions 1 color wheel with 7 colors plus open Variable direction rainbow effect with speed adjustable 2 meter to infinite electric focus 1 3 facet prism with variable speed and direction 0 100 linear LED dimmer 25T sec high speed LED shutter strobe effect with variable speed Preset variable random strobe and dimming pulse effect 11 13 DMX channels USITT DMX 512 DMX512 master slave and sound activated controllable or auto operation 7 built in programs DMX recorder and edit function integrated Red background LED display Powercon connector IN 3 pin XLR connectors IN OUT Fan cooling system Constant temperature readout and management function 45 C max ambient temperature IP20 protection rating 55dB at 3 dB rating 1 hanging kit Rota
8. seating areas or in areas were the fixture might be reached by unauthorized personnel Turn around Turn around Before mounting the fixture to any surface make sure that the installation area can hold a minimum point load of 10 times the device s weight Fixture installation must always be secured with a secondary safety attachment such as an appropriate safety cable OY 05 06
9. ting gobos Colors WY Mi S ays Aes NZ 3 For installations where the DMX cable has to run a long distance 1200 or is in an electrically noisy environment such asin a oX g discotheque it is recommended to use a DMX terminator This 7 helps in preventing corruption of the digital control signal by electrical noise The DMX terminator is simply an XLR plug witha KA 120 Q resistor connected between pins 2 and 3 which is then plugged into the output XLR socket of the last fixture in the chain B Please see illustrations below EJ MENU OPERATIONS MODE ADDR AUTO SOUN MI M XX LODA ON OFF VER V 1 0 V 9 9 CALI CH1 SET C DMX MOD1 w MOD2 ON OFF SIGL s1 E S3 TXXX DEGR PAN 630 540 360 TILT 270 180 90 VALU SLAV IP1 8 A001 AXXX AXXX DMX address setting ON OFF SLAV ALON AU A Alone setting MAST AU M Master setting ALON SO A Alone setting IP1 8 MAST SO M Master setting Data reload Color calibration Gobo calibration Mic sensitivity O ele w T N LED DISPLAY Down Up Mode Enter MIC 08 Regardless of the rigging option you choose for your MINISPOT 50 always be sure to secure your fixture with a safety cable The fixture provides a built in rigging point for a safety cable on the hanging bracket as illustrated above Be sure to only use the designated rigging point for the safety cable and never secure a safety cable toa carrying handle Ed DMX
10. tions Should you need any spare parts please order genuine parts from your local dealer MINISPOT 50 W IP20 e0 0 2m6 ta40 C te 150 C User Manual KEEP THIS MANUAL FOR FUTURE NEEDS EE SAFETY INSTRUCTIONS This device has left the factory in perfect condition In order to maintain this 10 8 Dimmer 0 255 Dimmer0 100 condition and to ensure a safe operation it is absolutely necessary for the user to 11 9 Focus 0 255 In near toout far CAUTION Becareful with your operations With a dangerous voltage you cansuffer a dangerous electric shock when touching wires 32 63 Shutter open 64 95 Strobe effect slow to fast 9 T Shutter Prism amp 0 5 OFF follow the safety instructions and warning notes written in this user manual l Rrotating 6 127 ON Rrotating from slow to fast If the device has been exposed to temperature changes due to environmental changes do not switch it on immediately The arising condensation could damage the device Leave the device switched off until it has reached room temperature This device falls under protection class I Therefore it is essential that the device be Special earthed function The electric connection must carry out by qualified person The device shall only be used with rate voltage and frequency Make sure that the available voltage is not higher than stated at the end of this manual Make sure the power cord is never
Download Pdf Manuals
Related Search