Sentio MMG Troubleshooting Guide
Contents
1. INNOVATIVE SURGICAL SOLUTIONS LLC 20 0 TROUBLESHOOTING GUIDE WARNING ICON Machine will not turn on Blue light is NOT turning on TRAPEZIUS Sensor Bete Warning lt lt J 2 L DELTOID C5 C6 Stimulation is not working or surgeon cannot turn on probe SENTIO MMG User s Manual TROUBLESHOOTING Check yellow power light on power supply to be sure electricity is flowing ll mI Be sure the is down and o is up Check to be sure unit is plugged into the wall Check plug into control unit Check all connections along power cord to be sure they are plugged in all the way If unit is still not turning on try a different wall outlet Check to be sure sensor USB is plugged into the harness Check wire to be sure the wire has not been damaged Is the stimulation setting set to the correct stimulation channel NAV Stim 1 Stim 2 Check ground input is plugged in to harness Check to be sure probe or stimulation accessory is plugged in to correct port on Page 53 of 58 REMEDY Control unit or power supply may need to be replaced Replace Sensor Replace ground patch Replace entire stimulation probe kit Replace Harness INNOVATIVE SURGICAL SOLUTIONS LLC SENTIO MMG User s Manual WARNING ICON TROUBLESHOOTING REMEDY harness box NAV Stim 1 Stim 2 Check to be sure ground pad has good attachment to patient Check Ground wire to be sure wire is fully int2. act and has not been damaged Have surgeon be sure probe is plugged all the way into the stimulation handle Be sure volume is turned up all the way on No Sound at l Ainiai ina the control unit Start UP ENEN cian NOTE This volume button will override the system volume if windows was placed on MUTE accidently No Sound Cannot hear Stimulation Icon or During Case Muscle Alert Be sure volume is turned up all the way on the control unit On SETTINGS tab in the MENU be sure the Stimulation tone is all the way up and the MAIN SYSTEM VOLUME is on 10 Page 54 of 58 INNOVATIVE SURGICAL SOLUTIONS LLC SENTIO MMG User s Manual WARNING ICON TROUBLESHOOTING REMEDY Be sure to tap directly over sensor if Tap will not Replace sensor possible clear to green Check to be sure sensor USB is plugged into the harness box Check to be sure the sensor is placed on the correct muscle Check to be sure sensor is placed on the correct side left right Check to be sure sensor is plugged into correct number slot If using a customized test be sure the correct muscle groups are selected Go to SETTING on the MENU and click on Constant high RESET WATCHDOG pitched noise that will not RESET WATCHDOG turn off Limited space is left on the hard drive WARNING of empty cases to a USB drive if available Delete a case low storage Make sure to remove data om ths procedure before stating another procedur from the file if s
3. pace needed If unit does not reset itself after 10 Hardware RED WARNING indicating HARDWARE Replace unit Disconnect DISCONNECT seconds check USB connections on bottom of control unit Unplug and then plug back in USB connections on bottom of control unit allow 10 second for system to reset Turn power off and restart control unit Page 55 of 58 INNOVATIVE SURGICAL SOLUTIONS LLC SENTIO MMG User s Manual WARNING ICON TROUBLESHOOTING REMEDY Pointer From the far right side of the taskbar location is select the arrow icon Select the yellow offset from and blue PM icon and then open the actual point control panel from the drop down menu of contact on Select the Configure button and then the screen when Standard Calibration button Follow the selecting eee prompts on the screen When finished select OK and then OK again to close the Control Panel 21 0 Equipment Transportation The SENTIO MMG system is a portable system designed for mobile applications however care should be taken when the equipment is transported A rugged heavy duty carry case is provided and should be used at all times when transporting the system Page 56 of 58
Download Pdf Manuals
Related Search