User`s Manual - Inventor Air Conditioners
Contents
1. to add or reduce 1 hour in 0 5 second The factory set timer is O hour With indicator lighting the system starts to time according to last setting time if there is no operation for 5 seconds Each time is pressed to set timer system restarts to time by new time or it does by original one till timing is over then turns off and stops working The unit is turned off without buzz hint when timing is over 1 5 TURN OFF Keep pressing ney in any status to turn off the unit until the power indicator light is off 1 6 CHILDREN SAFETY LOCK FUNCTION Under the working mode press both a and v at the same time for 3 seconds to lock the system Then a square O is displayed 3 seconds later it resumes to inspection temperature display status If there is a key pressed the symbol will show for 3 seconds without buzzer hint and then it resumes to inspection temperature display status again Methods to unlock 1 Shut off the electric machine 2 Timing is over 3 Press both A and for 3 seconds 1 7 POWER SELECTION Press button 1 to select the output power The heater will work with the full Rated output when HI is displayed Press button 1 again to switch to LO heating mode 1 8 TAKE ON THE GENERATOR ION Press the on on the ION indicator will be on then the ion will start operating which can make the room air cleaner 1 9 LOCKING THE CONTROL PANEL FUNCTIO2. GLASS PANEL HEATER Model G3INV 20DTW 2 000W 1 000W G3INV 20DTB 2 000W 1 000W User s Manual English O inventor Your conditions Thank you for choosing inventor Glass Panel Heater Please read this manual carefully and keep it for future reference GLASS PANEL HEATER WITH MECHANICAL CONTROL MODEL G3INV 20DT W B 1000W 2000W WHITE BLACK Please read and save these instructions BEFORE FIRST USE Read and follow all the Instructions in this User Manual even if you feel you are familiar with the product and find a place to keep it handy for future reference For your convenience record the complete model number located on the product identification plate and the date you received the product together with your purchase receipt and attach to the warranty and service information Retain in the event that warranty service is required NOTE The rating of this product as marked on the product identification plate is based on specific loading tests Normal use or the use of other recommended attachments may draw significantly less power IMPORTANT SAFEGUARDS When using any electrically powered product basic safety precautions should always be followed including the following PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT WARNING to reduce the risk of fire electrical shock or injury to persons or property Read all instructions before using this appliance and keep them for futu
3. NS 1 9 1 ELECTRONIC LOCKING Refer to section 1 6 2 Safety feature The unit is equipped with a high limit switch the heater will automatically shut down if it is in an over heating condition It will automatically come back to work when it cools down 3 Cleaning behind the heater It is very easy to clean behind it For mount ceiling installation Hold two sides of the heater pull the unit upwards and then forward then you can clean behind After cleaning the heater must be fixed in the normal position The heater requires regular cleaning to ensure trouble free operation Unplug the heater from the mains supply before cleaning Ensure that the heater has cooled down completely before cleaning Use a damp cloth not wet to wipe the exterior of the heater so as to remove dust and dirt Use a vacuum cleaner to remove dust and fluff around the grilles Ensure the heater is dry before plugging back into the mains supply Fig 3 UP 4 Warning Do not cover the heater in order to prevent a fire 5 Service If you require a service contact your local dealer or a qualified electrical appliance maintenance company 6 In case of any claim your statutory rights are offended contact your supplier REPLACEMENT OF SUPPLY CORD If the supply cord is damaged it must be replaced by a service agent or equivalent qualified person otherwise it may cause a hazard SUPERVISION OF CHILDREN Young children or infirm p
4. ersons should not use the heater without supervision For Conservatories A robust and practical choice for conservatories The heater offers an energy efficient heating solution for conservatories Built to a high specification the heater provides the perfect heating solution for conservatories where a stylish yet robust appearance is required and energy cost control is demanded Stylishly constructed and elegantly finished in white the heater which is maintenance free will enhance every location The heater works in harmony with the Air Conditioning unit creating a perfect environment Features Simple and efficient usable controls Space saving installation Fixed economy temperature Pre set maximum comfort to 24 C Tamperproof capability Low capital cost Maintenance free Suitable For K CONSERVATORIES HOTELS K PROPERTY DEVELOPMENT X COMMERCIAL X STUDENT ACCOMMODATION Mounting Guide Wall Mounted Mode Y Zo Specifications POWER L H L1 MODEL w mm mm mm G3INV 20DTW G3INV 20DTB BLACK WHITE 2000 1000 832 ES 250 10mm Qp Pull up the heater 10mm A then take down the heater A T zoe Wall mounted mode Take down the heater from wall When the installation is complete you will hear a click sound Push button if the installation is complete you will hear a click sound press t
5. he button up take down the caster 10 SAFETY GUARD SOND Fix the heater properly when mounting on a wall or when standing The heater is to be installed so that the controls cannot be touched by a person using a bath or shower The heater must not be installed directly under a socket outlet When the heater is working in free standing mode with the foot set please do not use it in the vicinity of bath shower or swimming pool When the heater is working on wall mounted mode do not touch the control unit when using it in the vicinity of bath shower or swimming pool Consult a qualified electrician or service technician if the power cord is damaged DO NOT cover the heater when it is working Always store the heater when not in use Make sure the heater has cooled down before storing This heater is not equipped with a device to control the room temperature Do not use this heater in small rooms when they are occupied by persons not capable of leaving the room on their own unless constant supervision is provided 11 O inventor Your conditions
6. not be tripped over Do not twist kink or wrap the cord around the appliance as this may weaken and split the insulation Always ensure that all cord has been removed from any cord storage area Do not use outdoors or whilst standing on a damp floor Do not store appliance while it is still hot This appliance is not intended for use by young children or infirm persons without supervision Young children should be supervised to ensure they do not play with the appliance The appliance must not be located immediately below a socket outlet Do not use this appliance with another programmer timer or any other device that switches the heater on automatically since a fire risk exists if the appliance is covered or positioned incorrectly All covers of this appliance are intended to prevent direct access to the heating elements and must be in place when the appliance is in use WARNING In order to avoid overloading do not cover the heater To reduce the risk of electric shock do not immerse or expose the product or flexible cord to rain moisture or any liquid other than those necessary for correct operation of the product The fireguard does not give full protection for young children and for infirm persons If the supply cord is damaged it must be replaced by a qualified electrician in order to avoid a hazard Do not use this appliance outdoors or on wet surfaces Avoid spilling liquid on the appliance CAUTION In order to avoid a haza
7. rd due to inadvertent resetting of the thermal cutout this appliance must not be supplied through an external switching device such as a timer or connected to a circuit that is regularly on and off by the utility Use this appliance only as described in this manual Any other use is not recommended by the manufacturer and may cause fire electric shock or injury This appliance is intended for household use only and not for commercial or industrial use 4 Overview of the appliance Fig 1 Air Outlet Control Unit a _ o Ea Switch 000 O inventor o Specifications rp Castor Wheel Stand Model Number G3INV 20DTW G3INV 20DTB Rated Power 1000W 2000W Rated Voltage 220V 240V 50Hz Dimensions mm 832 97 400 1 The function module This function module is designed for the use of the Heller Panel Convector Heater It is supplied fully assembled and can be replaced by an authorised technician The heater must be shut down during installation The function module contains an accurate electronic Thermostat Circuit Diagram Heating element NANAN H C H KSD thermostat KSD thermostat Temperature sensor 141312 11 HO 29 QD 46 O 4 Guide to the control panel 5 o now ak 0 1 Power Indicator 9 LED number display 2 Power button 10 Temperature C indicator 3 Up bu
8. re reference e Use only the voltage specified on the rating plate of the heater Do not cover or restrict airflow to the inlet or exhaust grilles in any manner as the appliance may overheat and become a fire risk Do not cover grilles block entry or exhaust of airflow by placing appliance against any surface Keep all objects at least 1 meter from the front side and rear of the appliance Do not place the appliance close to a radiant heat source Do not operate in areas where gasoline paint or other flammable liquids are used or stored e This appliance heats up when in use To avoid burns do not let bare skin touch hot surface Switch off and let the appliance cool down before moving Do not use the appliance to dry clothes Do not insert or allow foreign objects or metal utensils to enter any ventilation or exhaust opening as this may cause an electric shock fire or damage to the appliance Do not immerse in liquid or allow any liquid to run into the interior of the appliance as this could create an electrical shock hazard Do not reach for an appliance that has fallen into water Switch of at supply and unplug immediately Do not operate any appliance with a damaged cord plug or after malfunction of the appliance or has been dropped or damaged in any manner Refer to a qualified electrician for examination electrical or mechanical adjustment service or repair Do not operate appliance with wet hands The mos
9. t common cause of overheating is deposits of dust or fluff in the appliance Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning air vents and grilles Donot use this appliance near a window as rain may cause electric shock 3 Do not use an abrasive cleaning product on this appliance Clean with a damp cloth not wet rinsed in hot soapy water only Always remove plug from the mains supply before cleaning Do not connect the appliance to the mains voltage until completely assembled and adjusted This appliance is not intended for use in outdoor locations Do not use this appliance in the immediate surrounds of a bath a shower or a swimming pool or other liquids Always operate upright Switch off and let the appliance cool down before moving Do not operate with cord set coiled up as a build up of heat is likely which could be sufficient to become a hazard The use of an extension cord with this appliance is not recommended Do not remove plug from power socket until the appliance has been switched off Do not remove plug from power socket by pulling the supply cord always grip plug Always unplug appliance when not in use CAUTION This product is NOT suitable to be used on long pile carpets or Flokati rugs Do not allow cord to come in contact with heated surface during operation Do not run cord under carpeting throw rugs or runners etc Arrange cord away from traffic areas so that it will
10. tton 11 Heating Indicator 4 Setting button 12 High Heat Indicator 5 Down button 13 Low Heat Indicator 6 Low High Heating Selector 14 Generator ION indicator 7 Generator ION button 15 Power button 8 Timer indicator 1 Operation Guide 1 1 STARTING 1 1 1 Take out the heater from the carton carefully Please save the carton for off season storage 1 1 2 Make sure the convector heater is on OFF position before switching on 1 1 3 Assemble Fix the convector steadily according to the mounting instructions 1 1 4 Itis better not to use the same electric outlet with other high wattage electrical appliances in order to avoid overloading your circuit 1 2 TURN ON Plug in the unit the power indicator lights up after a short buzz Press set to turn on the unit room temperature is displayed The temperature light is on and the default factory set temperature is 35 C 1 3 TEMPERATURE CONTROL Press set again to set the temperature the 88 and the temperature C will flash then Press A or Q arrow buttons to add 1C or reduce 1C The maximum setting temperature is 45 C while the minimum one is 5 C 1 4 SETTING TIMER Press G once again to set timer setting time is displayed while timer indicator flashes The timer Unit is hour Press to add or reduce 1 hour the timer range is 0 24 hour Keep pressing
Download Pdf Manuals
Related Search