DP27 manual ITTM revised 20120406
Contents
1. 5 Enter the name and press the Next soft key then you can modify the number you want to store 6 Press the Next soft key you are able to select the ring tone from Melody 1 to Melody 10 press the Save soft key to confirm and exit you will hear a confirm beep Delete a number in the CID Book 1 Press the Menu soft key 2 Use the Select soft key to choose the CID Book 3 Scroll to the number you want to delete by using La or key 4 When the desired number appears on the display press the More soft key 5 Use L or key to choose Delete press the Select soft key The display will show Confirm Press the Del soft key to confirm you will hear a beep and the LCD shows the next number Delete all numbers in the CID Book 1 Press the Menu soft key 2 Use the Select soft key to choose the CID Book 3 Press the More soft key and use the or key to choose Delete All menu then press the Select soft key 4 The display shows Confirm press the Del All soft key to confirm Result You hear a beep and the phone returns to the standby mode after clearing all the CID numbers Torch If you turn this feature on the visual ringer will light steadily You can use the phone as a torch To turn on this feature in the Standby mode just keep the key pressed till the visual ringer light To turn off this function keep the key pressed again till the visual ringer go out Key Lock If you turn on this feature all key2. Viewing the Phone book Entries Then press the key or Dial soft key Editing the Phone book Entries 1 Press the Menu soft key 2 Press the key to choose the Phonebook press the Select soft key 3 Press the key to choose Edit menu Press the Select soft key 4 Press or key repeatedly until the entry you want to edit displays press the Select soft key to confirm 5 If necessary press the Erase soft key to clear the digit s then enter the desired name and number press the Next soft key to save 6 Use L or key to select the ring you like to associate with the number press the Save soft key to confirm Deleting the Phone book Entries 1 Press the Menu soft key 2 Press the key to choose the Phonebook press the Select soft key 3 Press or key to choose Delete Press the Select soft key 4 Press or key repeatedly until the name you want to delete displays then press the Select soft key The display shows Confirm You can press the Del soft key to delete it or press the Cancel key to exit 5 At step 3 if you choose Delete All menu and press the Select soft key the display will show Confirm You can press the Del All soft key to delete all the entries or press the Cancel key to exit PB Status The PB Status shows the number of phone book entries already stored When the PB Status shows on the LCD press the Select soft key to enter it One Touch Memories You can store up to 3 numbers in direct memorie
3. a long period of time remove the batteries to prevent possible leakage 12 Use only the power supply indicated in the User s Manual 13 Keep the phone out of the reach of children 14 Use the phone only in the described manner 15 Stop using the phone if it becomes damaged Unpacking Once you have unpacked your phone make sure that all the parts shown below are available If any pieces are missing or broken please promptly call your dealer 3 ARR NiMH Adapter Line cord batteries The shape of the plugs can vary according to each country s specification Phone Layout and Keys Function Handset Torch light Visual ringer Earpiece One touch Memories Up CID key M1 M2 SOS button Left soft key Disp lay Int key Right soft key Speaker Redial key Dial k End ke ial Speaker key ae y Battery Alphanumeric Phonebook key compartment keys cover key key Microphone Charging contacts Tone Control Volume Control Amplify Button Headset Jack Base Rear View Phone Power Jack Line Jack Charge pins B Page button Keys Description Car Cao Dial Speaker key Make Answer a call Activates the speakerphone if pressed during a call End Power key End a call Long press to activate power on off as described in par Turning Handset On Off Navigation key a Up CID key Scroll up through lists and menu options Increase the earpiece speakerphone volume during a call Ente
4. about 15 hours To charge the handset you should place it on the base Result When you place the handset on the base the handset automatically turns on Using Headset optional Headset Jack The headset jack is located in the left side of the handset and is 2 5mm standard plug Dii Simply plug the headset into this jack and Microphone the headset will be activated cip Note When the headset is plugged into the headset jack the microphone on the handset will be deactivated Turning Handset On Off If the handset is in power off mode when you place the handset on the base it automatically turns on To turn the handset on or off in standby mode follow these steps 1 To turn on the handset when it s off press and hold the key until you switch the display on On power up the handset will enter subscription mode and search for a registered base A message as shown below will be displayed to the user and the signal icon will flash gt Searching 2 To turn off the handset keep the key pressed until the display disappears If the handset is successful in finding a base the handset will enter the standby mode the display will show handset number and the handset name if you have one saved as described on par HS Name signal icon battery icon and current time If the handset is unsuccessful in finding a base the handset will behave according to the Out of Range condition Note When battery power is
5. soft key to confirm and the selected handset will behave according to the unregistered condition Flash Time You can select to change the Flash time by the following steps 1 Press the Menu soft key 2 Press or key to choose BS Settings then press the Select soft key 3 Use or key to choose Flash Time menu Press the Select soft key 4 The display shows the current setting Use the a or key to select Flash 1 Flash 2 press the Save soft key Modify PIN This function allows you to change the PIN number of the currently active Base The default PIN is 0000 1 Press the Menu soft key 2 Press or key to choose BS Settings then press the Select soft key 3 Use or key to choose Modify PIN menu press the Select soft key 4 The display shows PIN Enter the current PIN then press the Next key If the old PIN code is validated you will be prompted to enter a new PIN code If the old PIN is not validated a warning beep will sound and you will be returned to the Modify PIN menu 5 Enter the new PIN press the Next key You will be requested to confirm the PIN code Enter the new PIN again then press the Save soft key to confirm and exit BS Reset If you reset the base all the features under BS Settings menu will be restored to the factory initial setting Dial Mode and Flash Time 1 Press the Menu soft key 2 Press or key to choose BS Settings then press the Select soft key 3 Press L8 or key to choose BS R
6. very low if you place the handset on the base the display will show as below YOU SHOULD FULLY CHARGE THE HANDSET BEFORE USING Charging Basic Functions Making a Call 1 Pick up the handset and press the key Result The icon appears on the LCD 2 Dial a telephone number Note You can store up to 10 telephone numbers in memory for automatic dialing 3 To end the call either press the key or replace the handset on the base Note To make a call to the last number you dialed use the Redial feature For details see par Last Number Redial You can enter the desired phone number in standby mode which allows you to make corrections before dialing Follow these steps 1 Enter a telephone number up to 32 digits Check it You can also use the oo key to insert a pause Note If you make a mistake while entering a number press the Erase soft key to clear the last digit 2 When the number appears correctly press the key Receiving a Call When a new call is received the call information will appear If the caller can be identified the caller s phone number is displayed If the caller cannot be identified only the New Call information displays If you have a voice message the X icon and MSG WTG ON will be shown on the LCD 1 To answer the call press the key If you have activated the Auto Answer function when the handset is on the base simply lift it up to answer 2 To end the call either pre
7. 1 Press the Menu soft key 2 Press or key to choose HS Settings then press the Select soft key 3 Press the key to choose Audio Setup menu press the Select soft key 4 Use or key to choose Speaker V or Earpiece V press Select soft key 5 The display shows the current setting Use the or key to choose the volume level Volume 1 Volume 5 press the Save soft key Key Tone Every time you press a key your handset acknowledges it with a key tone You can disable the key tones for a silent use In certain error conditions a warning tone will sound when an incorrect key is pressed 1 Press the Menu soft key 2 Press or key to choose HS Settings then press the Select soft key 3 Press or key to choose Tone Setup menu press the Select soft key 4 Press the Select soft key again to choose Key Tone 5 You can use L or key to choose On or Off to enable or disable the function 6 Press the Save soft key Note For normal use we recommend you leave the key tone enabled This makes the phone easier to use LCD Contrast Setting The adjustment allows you to optimize the visibility of the display by changing its contrast according to the environment conditions 1 Press the Menu soft key 2 Press or key to choose HS Settings then press the Select soft key 3 Press or key repeatedly to choose LCD Contrast then press the Select soft key 4 Use L or key repeatedly to choose among the 17 available contrast levels the
8. DP27 USER S MANUAL Congratulations on purchasing our high quality product Please read the manual carefully to find out all features and how your telephone works so you can get the best out of your new phone Safety Precautions To reduce the risk of electrical shock and injury please follow these basic safety precautions before using the phone 1 Carefully read and observe the instructions in this manual 2 Follow all warnings marked on the unit 3 When cleaning unplug the phone first then use a damp cloth to wipe Do not use liquid or aerosol cleaners 4 Do not place objects on the line cord that may cause damage 5 Do not use this phone in wet surroundings or environments where there is a risk of explosion 6 Avoid spilling of any liquid on the phone 7 Unplug this phone from the wall outlet and refer servicing to qualified service personnel only 8 Pay attention to the polarity of the batteries insert the rechargeable batteries in accordance with polarity symbols this instruction is found in the installing batteries section 9 Use only the batteries indicated in the User s Manual Never use other ordinary batteries or conventional alkaline batteries Otherwise this may not only cause personal injuries but also damage to the unit 10 Do not mix exhausted batteries with full batteries Exhausted batteries shall not be disposed of with the usual household waste or in a fire 11 If the handset will not be used for
9. Note If one of the handsets drops the conference call the remaining handsets will continue the conference Caller ID on call waiting When you subscribe to Call Waiting service from your local telephone company the telephone will display the name and number of the second caller while you are having a conversation Caller ID info displayed Caller two s information is displayed Caller 1 4361234 E Caller 2 2915678 1 When you are on the line the telephone will automatically display the name and number of the second caller 2 Press the Flash soft key to answer the second caller 3 When you have finished press the Flash soft key to continue with your conversation with the first caller Note If you have transferred an external call to another handset you cannot use the call waiting function via the second handset Feature List 1 8GHz DECT technology with GAP 2 0 large LCD display 128 x 64 dots matrix display Up to 5 handsets for optional for one base Up to 4 bases for optional for one handset LCD contrast adjustable Phonebook with up to 50 entries 9 VIP ring tones setting for phonebook entries Redial book with up to 10 entries 10 ring tones and volume selectable 5 levels off Torch function Vibrating loud ring signaler Headset compatible 3 one touch memory speed dial buttons Full handsfree speakerphone Internal call Call transfer 3 way conference call Predialingnumbertalking am
10. eset menu press the Select soft key You will be prompted to enter the PIN code 4 Enter the PIN code the default PIN is 0000 then press the Reset soft key If the PIN code is validated all Base settings will be reset to the factory default otherwise the settings will remain Result After resetting the handset will return to standby mode HS Settings Setting Alarm You are able to set the alarm on the handset and adjust the alarm settings 1 Press the Menu soft key 2 Press L8 or key to choose HS Settings then press the Select soft key 3 Press the Select soft key to choose Alarm menu 4 The display shows the current set Use the L or key to select On Off press the Select soft key 5 If you select On the display indicates you to enter the time in HH MM format Use the numeric keypad to enter 6 Press the Next soft key a beep sounds and the display shows Snooze On Off you can press or key to enable or disable the snooze function on the alarm and press the Save soft key 7 When the alarm sounds press any key to switch it off Notes At step 5 you need to enter the time in 24 Hour format If you press any key at the right time the alarm to ring the alarm will be silent If you choose Snooze On the alarm will ring at regular intervals of 11 minutes If you press the key when the alarm sounds the option will be switched to Snooze Off Audio Setup You can also use the menu to adjust the audio volume
11. information is transmitted from the network on which the call was made and the caller doesn t hide it the caller s phone number is displayed Moreover if you missed one or more calls the d icon will appear on the LCD If the CID memory is full the e icon will flash on the LCD Out Of Area This message will display when someone calls from an area where the telephone company is not offering the caller identification services or is not yet providing number delivery to your area Private If the caller has exercised the option to prevent his name and number from being sent the message will show on the LCD View and dial any of the CID numbers 1 Press the Menu soft key 2 Use the Select soft key to choose the CID Book and if available the numbers are displayed You can also access the CID book directly by pressing the key in standby mode 3 Use or key to view the numbers you can make a call by a press of the key You can also add the entry to the phonebook Note At step 3 each item of the incoming list is marked with the t icon if the call has been reviewed or with the d icon if the call hasn t been reviewed yet Add CID Number to Phone Book 1 Press the Menu soft key 2 Use the Select soft key to choose the CID Book 3 Use L or key to view the numbers when the desired number displays on the LCD press the More soft key to enter Add to PB menu 4 Press the Select soft key you are prompted to enter the name
12. le the function 5 Press the Save soft key Registration The supplied handset is already registered with the number 1 You can register up to 5 handsets to your base unit in order to share the same line with other people Before registering a handset to the base you should press and hold the key on the bottom of the base for about 5 seconds then release it 1 Press the Menu soft key 2 Press L or key repeatedly to choose the Registration then press the Select soft key 3 Use or key to scroll through the Base names list press the Select soft key to choose a base to your necessary The handset will search for the requested base and the relevant information will flash on the LCD 4 If the base is found and the handset is successfully registered you will be prompted to enter the PIN code the default one is 0000 On validation of the PIN code the Registration tone will sound and the Base assigns a number to the handset If the PIN code entered is invalid a warning tone will sound and the handset will return to the previous registration state 5 If the base is not found the handset will behave according to the Out of Range condition Calling with more than one Handset If you have more than one handset registered to the same base you can make internal calls and transfer an external call between the registered handsets Making an internal call 1 Press the LNT key the LCD displays as follows then enter the numbe
13. led Signal Icon DO Indicates whether the current signal exists or not If the handset is too far from the base this icon will blink on the LCD 5 Alarm Icon This icon appears when you set an alarm to ring at a specified time af Keypad Lock This icon appears when the keypad is locked Connecting Lines 1 Connect one end of the phone line cord to the phone line jack of the base and the other end to a standard phone wall outlet 2 Connect the modular end of the AC power adapter to ie the power jack of the base then plug the AC adapter SEE into a standard AC wall outlet To phone wall outlet Installing Batteries The rechargeable Ni MH batteries AAA size 1 2V eo F a 600mAh come with your phone Install the batteries Q bef Pap Ven efore use R R4 1 Slide the battery cover in the direction of the arrow and pull it out 2 Insert new batteries as indicated matching correct polarity 3 To replace the battery cover slide the cover up until it snaps in place Notes Reversing the orientation may damage the handset The batteries need to be replaced if they do not recover their full storage capacities after recharging When replacing the batteries always use good quality Ni MH re chargeable batteries Never use other batteries or conventional alkaline batteries Charging Handset Important Note Before initial operation YOU SHOULD FULLY CHARGE THE HANDSET for
14. lt 1 Press the Menu soft key 2 Press the key to choose the Phonebook press the Select soft key 3 Press the Select soft key to choose New 4 The display shows Name Enter the name you want to use then press the Next soft key to confirm The display shows Number Enter the desired number up to 20 digits press the Next soft key 5 Use L or key to select the ring you like to associate with the number press the Save soft key to confirm 6 Repeat if necessary Tf you want to set a VIP number you should select a special ring tone for it The ring tone should be different from the external ring you have set You can set up to 9 VIP ring tones associate with 9 VIP numbers groups Note If you make a mistake while entering a number use the Erase soft key to correct it Each time you press the key the last digit is deleted To clear all digits press and hold the Erase key Using a Pause A pause is useful when you access an interactive voice response system such as an automated banking system A pause provides a delay of 3 seconds If you want to insert a pause when you dial a number in standby mode or store a number in memory press the key The letter P will appear at the pause entry Viewing the Phone book Entries 1 In the standby mode press the key 2 Press or key repeatedly until the desired name is displayed Dialing a Number from Phone book Find out the number you want to dial Refer to
15. n press the Save soft key 5 Press the key to return to standby mode Setting Date amp Time 1 Date amp Time Format 1 Press the Menu soft key 2 Press or key to choose HS Settings then press the Select soft key 3 Press or key to choose Date amp Time menu press the Select soft key 4 Use LE or key to choose Date Format or Time Format press the Select soft key 5 You can use L or key to choose the Date Format DD MM MM DD or the Time Format 12 Hour 24 Hour press the Save soft key to save 2 Setting date amp time 1 Press the Menu soft key 2 Press L amp or key to choose HS Settings then press the Select soft key 3 Press or key to choose Date amp Time menu press the Select soft key 4 Press L or key to choose Set Date or Set Time menu press the Select soft key 5 Enter the current date time by numeric keypad and press the Save soft key to save and exit Notes If you select 12 Hour AM PM will appear on the right of the time in standby mode At step 5 you need to enter the time in 24 Hour format Selecting a Base This function allows you to select a base from those already registered to the handset You can access the options by scrolling the menu 1 Press the Menu soft key 2 Press or key to choose HS Settings then press the Select soft key 3 Press or key to choose Select Base menu press the Select soft key 4 You can use L amp or key to select the base you want then pres
16. o locate a lost handset Press the key on the bottom of the base less than 5 seconds all the handsets registered to the base will ring for about 60 seconds To stop paging press the key on the base again or any key on the handset Note Ona long key press more than or equal to 5 seconds the base will enter subscription mode For details see par Registration Dial Mode You can select to change the dial mode by the following steps 1 Press the Menu soft key 2 Press or key repeatedly to choose BS Settings and press the Select soft key 3 Press the key to choose Dial Mode then press the Select soft key 4 You can press La or key to select the required dial mode options Tone Pulse and press the Save soft key A confirm beep will be heard Note If you are not sure which dialing mode should be selected please contact your local service provider Handsfree During a call you may turn on the speakerphone built in the handset In this mode you can simply put your handset on a surface e g a desk and enjoy the comfort of the handsfree conversation To turn the feature on press the key during a call line engaged The q icon appears on the LCD To turn the feature off and keep on talking in normal mode press the key again The q icon will disappear Notes Before putting the handset near your ears be sure you have turned the speakerphone off To adjust the speakerphone volume see par Adju
17. ou press the amp key in receiver mode during a conversation the Amplify indicator on the handset lights on If you press the z key again the indicator will go out You can also select the earpiece volume or the speaker volume by the Audio Setup in Menu under HS Settings as described in par HS Settings Ringer Setting You can select your own external from the telephone Network or internal from other handsets registered to the same base ring tone and adjust the volume 1 Press the Menu soft key 2 Press L or key to choose HS Settings menu then press the Select soft key 3 Press or key to choose Ring Setup press the Select soft key 4 Press the Select soft key to choose INT Ring or press the key to choose EXT Ring press the Select soft key 5 Press L or key to choose Melody or Volume press the Select soft key Result You can select the ring tone from Melody 1 to 10 or adjust the volume from Volume 1 to 5 or off When you adjust the ring tone or volume the phone plays the selected melody or sounds the selected loudness 6 Press the Save soft key to confirm Note If you set the volume to Off when a call comes in only the New Call information appears on the LCD Last Number Redial 1 Press the L key or the Redial soft key in standby mode in standby mode Result The LCD displays the last number you dialed 2 Press the key to dial out the number Your phone allows you to retrieve the last 10 number
18. p CHD talking Redial Flash Pause TONE PULSE dialing mode selectable FLASH time selectable Call duration display Real time clock set time Keypad lock 13 languages selectable Auto answer ON OFF selectable Alarm clock include snooze option Handset Name setting Backlit LCD screen and keypad Caller ID FSK and DTMF dual system Caller ID Caller ID Call Waiting Caller ID list with up to 40 entries Incoming calls can be called back added to phonebook deleted Troubleshooting Check that the power adapter is properly connected No operation Check that the telephone line cord is properly connected Check that the handset batteries in full power Check that the handset batteries are installed properly No dial tone Check that the telephone line cord is properly connected Check that the power adapter is properly connected Check that the handset batteries are installed properly Check that the handset batteries in full power Check that the handset is on Nothing appears on the display Handset seems Check the charge contacts o have very short Consistently short battery life may indicate that replacement of the batteries is necessary Make sure the right batteries be used Caller s number Make sure you have subscribed to a Caller ID service via your network provider is not displayed The caller may have withheld their details Let the phone ring a couple of times as there may be a delay in receiving the Calle
19. r ID information Technical Specificati ame o Power Supply Base input 7 5V 500mA Handset input Ni MH 1 2V x 3 600mAh Design and specifications are subject to change without notice If you subscribe to a DSL service Please attach a noise filter contact your DSL provider to the telephone line between the base unit and the telephone line jack in the event of the following Noise is heard during conversations Caller ID features do not function properly To single line telephone jack ie Noise filter
20. r of the handset you want to call Intercom q teas 2 If the handset entered is valid the called handset will ring and display HSX Calling The handset user can press the key to answer the internal call 3 At the end of your conversation press the key Note During the internal call if an external call comes in the LCD will show the caller s number You should press the key to end the internal call first then press the key to answer the call Call transfer between handsets You can transfer an external call between the handsets those are registered to the same base 1 During an external call press the nr key then enter the number of the handset you want to transfer the call to 2 If the called party can answer your call he she can press the key to talk with you At this time you can inform him her of the incoming call 3 When the called handset answers press the key or replace the handset to the base to complete the transfer Setting up a 3 way conference call When you have both an external call and an intercom call in progress you can set up a three way conference call like this 1 During an external call press the nr key and then the number of the handset you want to join the 3 way call 2 The called party press key to answer 3 The calling party can press the key to start the 3 way call 4 Either of the two internal handsets can press the key to leave the conference call at any time
21. r the CID book as described in par CID Book Down Phonebook key Scroll down through lists and menu options Decrease the earpiece speakerphone volume during a call Enter the Phonebook as described in par Phone Book wt INT key Set up an internal call to another handset Transfer an incoming call to another handset Set up a conference call with an external line and an internal handset 0 co Redial key Enter the redial book as described in par Last Number Redial Insert a pause when pre dialing a number Left Right soft key Perform the functions indicated by the text immediately over it on the bottom line of the display which changes time by time Star key Press and hold to turn on off keypad lock function Set up a conference call as described in page 40 One touch memories You can store 3 numbers in One touch memories M1 M2 and SOS 0 key In standby mode press and hold this key until the icon appears to activate the shaker and visual ringer function Press and hold this key again until the icon disappears to deactivate it LCD Window Icons Description d New Call Indicates you have missed one or more calls MSG Waiting Indicates you have one or more voice messages Off Hook Indicates the line is engaged Hands free Indicates the handsfree function is enabled Battery Icon Indicates battery charge level Shaker Icon Indicates the shaker and visual ringer is enab
22. s All the numbers will be stored in the phone book Storing Memory Numbers 1 Press the memory key M1 and M2 SOS in standby mode 2 The display shows Number Enter the desired number up to 20 digits press the Next soft key 3 Use L or key to select the ring you like to associate with the number press the Save soft key to confirm Viewing Memory Numbers 1 In the standby mode press the key 2 Press or key repeatedly until the desired number is displayed Dialing from One touch Memories In the standby mode press M1 M2 or SOS to dial out the corresponding number Editing Memory Numbers Perform the steps of par Editing the Phone book Entries Note The memory default names are M1 M2 and SOS you can add a name after them but cannot delete the default name e g you can modify M1 to M1 home Deleting Memory Numbers Perform the steps of par Deleting the Phone book Entries BS Settings Terminate HS This function allows you to delete a handset registration from the base 1 Press the Menu soft key 2 Press or key to choose BS Settings then press the Select soft key 3 Press the Select soft key to choose the Terminate HS menu The display shows PIN to prompt you to enter the PIN Code The default PIN Code is 0000 Then press the OK soft key 4 Use L or key to select a handset If you select the current handset or a non existent handset a warning tone will be heard 5 Press the Select
23. s the Select soft key If you select a non existent base the handset will sound a warning tone 5 The display will show Selected BSX Press the Select soft key to confirm A confirm tone will be heard HS Reset If you reset the handset all the features under HS Settings menu will be restored to the factory initial setting Alarm Audio Setup Ring Setup Tone Setup Language HS Name Auto Answer and Date amp Time But LCD Contrast cannot be restored 1 Press the Menu soft key 2 Press or key to choose HS Settings then press the Select soft key 3 Press LJ or key to choose the HS Reset menu press the Select soft key You will be prompted to enter the PIN code 4 Enter the PIN code the default one is 0000 then press the Reset soft key If the PIN code is validated all handset settings will return to the factory default otherwise a warning tone will be heard and the settings will remain Result After resetting the handset will return to standby mode Amplified Your phone is equipped with a specialized amplification function designed to fit your needs If you switch this function on the handset receiver volume adjustment is 15 30dB Otherwise the receiver volume adjustment is 0 15dB 1 Press the Menu soft key 2 Press or key to choose HS Settings then press the Select soft key 3 Press or key to choose the Amplified menu press the Select soft key 4 You can use L or key to choose On or Off to enable or disab
24. s will be locked except M1 M2 and SOS You can answer calls by using the key But when you hang up the phone returns to the locked mode This feature is useful to avoid pressing keys by mistake To lock the keys in the standby mode just keep the key pressed till the display shows HS Locked and the 70 icon To unlock the keys keep the key pressed again till the key lock icon disappears from the display Note In locked mode if you press any key the phone will generate a warning tone and the HS Locked message will be redisplayed Selecting a Language The handset supports up to 9 predefined languages English French Spanish German Italian Dutch Swedish Russian and Portuguese You can change the language used to display the menu messages 1 Press the Menu soft key 2 Press or key repeatedly to choose HS Settings press the Select soft key 3 Use L or key to choose Language then press the Select soft key 4 The languages will be displayed Use the L or key to scroll through the options Each language will be displayed in its own native translation 5 Press Save soft key to select the required language and you will hear a confirm beep HS Name Using this feature you can define a name of the handset in order to easily recognize your handset if you have more than one registered to the same base But when you reset the handset the handset name will be deleted 1 Press the Menu soft key 2 Press or ke
25. s you have dialed and recall them quickly Search for and dial a number in Redial Book 1 Press the Redial soft key in standby mode 2 If you want to scroll through the memory press or key repeatedly until you find out the number you want to dial 3 Press the key to dial out the number Notes If no numbers are found Empty is displayed When the redial book is full each time you dial a new number the oldest number stored in the redial book is automatically erased Use Redial Book options Using the redial book options you can add a number to phone book or delete a number in the redial book 1 Press the Redial soft key 2 Scroll to the desired number by using the or key 3 When the number appears on the display press the More soft key to choose the desired option Add to PB allows you to add the number to the phone book Complete storing the entry by starting from step 4 described in par Adding the Phone Book Entries obviously you will find the number already entered in the appropriate field Delete allows you to delete the selected number Delete All allows you to delete the whole redial book 4 To return to standby mode press the key Note At step 3 when you select Delete or Delete All options a message Confirm will further ask you to confirm the deletion To confirm press the Del or Del All soft key to escape press the Cancel soft key CID Book When you receive a call if the caller s
26. ss the key or replace the handset on the base Result After you hang up the call the LCD displays the call duration Notes You can select the ringer volume by using a or key when the phone rings with an incoming call If you want to deactivate the X icon press the a key in standby mode then press and hold the key After that press the key to return to standby mode The handset must be registered to the base If the polyphonic ring tone is set the ring tone may continue for 4 seconds after the caller s hang up or after the parallel phone had answered the call Muting the Microphone During a conversation you can temporarily switch your phone s microphone off so that the other party cannot hear you Example You want to say something to another person in the room but do not want the other party to hear you To mute your microphone press the Mute soft key during the conversation The Call Muted appears on the LCD To unmute the microphone press the Mute soft key again You will restore the normal condition Amplification Function Your phone is equipped with a specialized amplification function designed to fit your needs During a conversation you can adjust the A or control on the left side of the handset and D 2 use the amp key on the right side You can also adjust the control to fit the levels to your hearing requirements The selected volume will be displayed on the LCD A o When y
27. sting Audio Volume Flash Signal When the line is engaged pressing the Flash soft key sends the Flash signal This key is used in conjunction with special services e g call waiting which can be available in your phone network For further details please contact your network telephone company To use the said special services just press the Flash soft key while the line is engaged the display will show R Advanced Functi Menu Map 1 CID Book 2 Phonebook New Edit Delete Delete All PB Status 3 BS Settings Terminate HS Dial Mode Flash Time Modify PIN BS Reset Phone Book 4 HS Settings Alarm Audio Setup Ring Setup Tone Setup Language HS Name Auto Answer LCD Contrast Date amp Time Select Base HS Reset 5 Registration The phonebook built in your cordless phone allows you to store frequently used numbers so that you can easily make a call without having to remember or enter the phone number Character Map To enter a specific alphanumeric character press one or more times the relevant key for the required character according to the following table once for the first character twice for the second and so on Characters in the disp 0 spy oO n l O 1 layed order j m W joj Q Jajo amlo A u 2 3 j 5 6 SlAljviz x IEO Z x lt a o wn N Adding the Phone book Entries lt 12 10 F lt Nir jv 13 E lo 3 x 3 0 E
28. y repeatedly to choose HS Settings press the Select soft key 3 Use L or key to choose HS Name then press the Select soft key 4 You can enter the handset name up to 12 characters by using the alphanumeric keys use the Erase soft key to delete the incorrect characters then press the Save soft key to confirm and exit The handset name will be displayed above your handset number in standby mode Auto Answer With this feature you can answer a call by just picking up the handset from the base without pressing any key 1 Press the Menu soft key 2 Press or key repeatedly to choose HS Settings press the Select key 3 Use L or key to choose Auto Answer then press the Select soft key 4 Use the or key to choose On Off to enable disable the function then press the Save soft key you will hear a confirm beep Range Alarm A beep will sound when the handset is out of range of the Base You are able to select to enable disable this audible warning 1 Press the Menu soft key 2 Press or key repeatedly to choose HS Settings press the Select soft key 3 Use or key to choose Tone Setup then press the Select soft key 4 Press the key to choose Range Alarm then press the Select soft key 5 Use or key to choose On Off to enable disable this audible warning then press the Save soft key you will hear a confirm beep Paging You can page the handset from the base unit making it ring with a special tone It s useful t
Download Pdf Manuals
Related Search