Home

Handleiding

1. 405 V1 0 2014 smanos All rights reserved CHUANGO GB1260 i t MA 80 285X210mm 95X70mm I 2 Ver GB1260 EN 1405 1 0
2. has a direct and unobstructed view of the protected glass Installation steps Connect the AC adaptor with the connector of the detector Then plug the AC adaptor into wall socket Clean the surface of the locations you are going to install Use the double sided tape to fix the product on the installation site You can set sensitivity of detector based on requirements If the environment produces echoes easily adjust sensitivity to low if the environment has damping materials adjust the sensitivity to high Installation Diagram Connect with the Control Panel Please connect the detector with control panel before use Make sure the control panel is under connecting state Press the rear tamper switch of the detector the control panel receives wireless signal from the detector and beeps once Connection succeeded Arm the alarm system and trigger the rear tamper switch of the detector again the siren of control panel will hoot to indicate they have been connected successfully Specifications Power Supply DC 12V 500mA Static Current lt 2 6mA Alarm Current lt 28mA Detection Distance Max 7m Transmitting Distance lt 80m in open area Radio Frequency 868MHz Housing Material ABS plastic Operation Condition Temperature 10 C 55 C Relative Humidity lt 80 non condensing Detector Dimensions L x W x H 54 X 15 X 106 5 mm Ver GB1260 EN 1
3. smanos Glass Break Detector o Gb1260 User Manual Me Introduction Glass break detector is a device which responds to glass broken and alarms The product collects environmental sounds by high accuracy microphone then analyzes and judges the signal by microprocessor after filtering and magnifying the receiving aural signal so that the product can avoid false alarm effectively The product is suitable for buildings banks hotels shops and homes etc Product Overview Front View Rear View Sound Pickup Hole Connector for AC Adapter LED Indicator External Tamper Switch Interior View AC Adaptor LED Indicator Antenna Audio Sensor Sensitivity Adjustment Internal Tamper Switch Zone Setting Testing Connect the adaptor with the connector and then plug the adaptor into wall socket The detector enters normal working mode after the LED indicator flashes once Knocking glass object e g knocking a glass bottle with a metal spoon the detector receives the high voice frequency signal Meanwhile the LED indicator flashes once which means the detector works properly Installation and Sensitivity Adjustment Install the detector on the ceiling or walls adjacent or opposite to the protected glass Avoid proximity to noisy objects such as bells fans compressors and loud machinery Make sure the microphone

Handleiding

Contents

Download Pdf Manuals

Related Search

Related Contents