Home

e-move

1. Ensure that no children or pets touch the charger Risk of electric shocks or damage to the equipment Do not use any other type of charger Only use the one enclosed in the delivery Decon Wheel AB Tel 46 0 345 408 80 23 Landerydsvagen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 2 decon wheel Warning Be careful when you handle the battery Do not attempt to open disassemble modify or solder the battery pack assembly Do not directly connect the negative and positive terminals with wire or metal object Do not drop hit or subject to strong physical shock If fluid leaks from the battery do not use Wash the fluid from skin and clothes immediately If battery fluid gets in your eyes flush with water and get immediate medical attention Corrosion All parts of e move are made of aluminium and stainless steel To reduce the corrosion of the material the material surface has been treated Despite of this you should always wipe the e move if it is exposed to water or damp Service and maintenance At a normal usage of e move the product demand minimal maintenance For safety reasons you should leave your e move to service every other year you can do this either to Decon Wheel or to your dealer When the e move is not in use store the wheelchair with the e move wheels in a safe place with the power turned off Decon Wheel AB Tel 46 0 345 408 80 24 Landerydsvagen Fax 46 0 345
2. 1 Handle 2 Battery 2a Battery cover Wheel attachment Drive wheels 22 24 Drive ring Cover for electric motor Rubber bushing Charging lead Charging unit eS aS eS Decon Wheel AB Tel 46 0 345 408 80 5 Landerydsvagen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se decon wheel Important safety instructions before using e move For safety reasons e move must only be operated by people who e Have received instruction on using e move e Are in good physical and psychological health so as to be able to control e move safely in all operating situations Instruction on operating e move is included in the scope of the delivery and will be provided at a time agreed through your specialist dealer or a Decon Wheel representative This service is completely free of charge If you still do not feel safe using e move please contact your specialist dealer Adhere to all the values the wheelchair manufacturer has specified in the directions for use particularly maximum clearance limits Also carefully follow the operating and safety instructions in the directions for use of the wheelchair e move has no separate brake authorized personnel or a Decon Wheel representative must fit the parking brakes to the wheelchair and adapt them to the e move wheels If the wheelchair is equipped with drum brakes you must remove them in order to be able to operate the wheelchair with e move In this case
3. a suitable temperature _ aana extremely warm i N odour or abnormal sound Decon Wheel AB Tel 46 0 345 408 80 Landerydsvagen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon Wheel WARNING If the instructions are not followed injury to the user and or damage to the wheelchair may result e Always use the overturn protection e Do not lift the chair by the battery battery holder cable or pushrims e Do not let children or people not familiar with e move use the wheelchair w O as ena This pone has been W from an environmentally aware manufacturer that T i yar ae the Waste Electrical and Electronic Equipment WEEE Directive E This product may contain substances that could be harmful to the environment if disposed of in places landfills that are not appropriate according to legislation Please return the whole product wheels battery and charger to Decon Wheel or your dealer for recycle the product properly For ordering the e move and spare parts please contact Decon Wheel or your local dealer service centre Manufacturer Decon Wheel AB Landerydsv gen S 314 33 Hyltebruk SWEDEN Tfn 46 0 345 408 80 info decon se www decon se Decon Wheel AB Tel 46 0 345 408 80 33 Landerydsvagen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se
4. the actual wheelchair please refer to the wheelchair instruction manual enclosed with the delivery A 1 Decon Wheel AB Tel 46 0 345 408 80 19 Landerydsvagen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon wheel Angle adjustment Angle adjustment of the switch lever Loosen the screws A figure 2 Then adjust the lever to the desired position and retighten the screws For instructions on how to adjust the backrest seat etc please refer to the wheelchair instruction manual enclosed with the delivery Decon Wheel AB Tel 46 0 345 408 80 20 Landerydsv gen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon wheel Technical specifications Weight of the e move system 16kg including battery Range Approximately 15km depending on temperature and terrain Speed 0 6kph Motor 24Y 90Wx2 Tyre dimensions 24x 13 8 Pressure 6 Bar 600 kPa Sane ls pe Nickel Meta Hydride 24V x 6 7 AH Fuse 30A flat Battery charger Capacity 100 to 240Y AC 50 60Hz Calculated power 37Y 26A during charging Charging time normal charging approximately 2 3 hours Reconditioning approximately 3 13 hours Storage temperature 0 40 C Increased chair width cm approx 4 cm Maximal users weight 120 kg see wheelchairs producers specification Maximal climbing ability see wheelchairs producers specification Decon Whe
5. 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon wheel Charging the battery Put one end of the lead A in the charger B as shown in figure 1 The other end is put into a 100 240V socket Then carefully place the battery into the charger There are two types of charging processes quick charging and reconditioning The battery must be reconditioned from time to time to ensure optimum battery life and to avoid deterioration of battery capacity See the section on reconditioning opposite page Quick charging 1 Place the battery in the charger If the battery is at the correct temperature 0 40 C the green charging light A fig 2 will come on The battery will be fully charged 2 3 hours later the charging process may take longer if the battery 1s charged in a very warm or cold place 2 If the battery temperature is too high over 40 C or too low under 0 C the green charging light A fig 2 will flash until the battery temperature becomes suitable The charging process will then start automatically 3 The capacity lights B figure 1 on the battery indicate the stage in the charging process 4 When the process is complete the charging lights and the battery s capacity light go out automatically NB Do not charge a battery which 1s already charged as this will shorten its life Reconditioning When reconditioning discharging and charging are carried out automatically As the battery 1s firs
6. attendant The chair runs sluggishly Is the battery charged Charge the battery or replace it Has the battery been placed Place the battery into the into the holder correctly holder Have you touched the control Press the button again If it lever by mistake still runs sluggishly contact your supplier Has the system switched off Switch off the system and automatically Switch it on again Pump up the tyres Is there enough air in the tyres Abnormal vibration Is the wheel loose Put it into place correctly Can an abnormal sound be Contact your supplier heard coming from the driving machinery The battery has a short Is the battery fully charged Recharge or replace the range battery Has a fuse blown Replace the fuse or contact your supplier for instructions Has the battery been charged Recharge the battery in a in a suitable way suitable place The lights do not come on Is the temperature around the Try to recharge the battery hand after you have charged battery and the charger when the charger and battery the battery suitable are at a suitable temperature If all of the battery lights do not come on after recharging the capacity has de creased due to battery deterioration Contact your supplier Charging stops abruptly Is the battery fully charged Check the battery s capacity lights Charging is never completed Is the temperature suitable Wait until the charger and battery are at
7. backwards slightly Practise braking when using the wheelchair at different speeds Decon Wheel AB Tel 46 0 345 408 80 15 Landerydsv gen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon wheel 4 Lifting the castors If you need to lift the castors when the motors are on you must not touch the handrims Hold the tyres instead It is best to switch off the power and then hold the handrims as usual 5 Going up steps One way of getting up low steps is to go back wards 6 Upward and downward slope Ensure that the chair does not tip over when you go uphill The chair will keep to a constant speed on downward slopes Select a speed that allows you to stop easily Do not have the power switched off on downward slopes This may cause the wheelchair s speed to increase to such an extent that you will find it difficult to stop Decon Wheel AB Tel 46 0 345 408 80 16 Landerydsv gen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon wheel 7 Slopes Practise using your wheelchair on sloping surfaces and curves Proceed very carefully 8 Crossings and pavements Take plenty of time when using a pedestrian crossing Ensure that you do not drive into kerbs Ensure that the castors do not get stuck in the tracks when you use a railway crossing 9 Manual operation If you switch off the power the chair will work just like a normal manua
8. e charged upon delivery Remove the protective cover and simply insert the battery in the battery holder as shown in Ill 2 Battery 2 Decon Wheel AB Tel 46 0 345 408 80 9 Landerydsvagen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon wheel Overturn protection Before you start using e move for the first time you must check that the overturn protection is fitted to your wheelchair For safety reasons you should only remove the overturn protection in order to get over an obstacle e g a high kerb The assistance of another person will then be necessary The installation instructions supplied with your wheelchair must be observed when fitting and removing the overturn protection Decon Wheel AB Tel 46 0 345 408 80 10 Landerydsv gen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon Wheel Important If you propel your wheelchair applying the same amount of force as for a normal manual wheelchair you will notice that thanks to the e move system each push will take you much further Be careful in the beginning when using your wheelchair until you have learnt how it operates Always switch off the power and apply the brakes when you want to get in or out of the wheelchair Do not touch the switch when using the wheelchair except for when you want to stop If you switch off the power when the wheelchair is moving quickly the chair will sto
9. e move User s manual CE No Z1 06 05 33621 EC Declaration of Conformity The undersigned representing the following manufacturer Decon Wheel AB Org no 556618 9006 314 22 HYLTEBRUK SWEDEN Herewith declares that the product e move part no series MEM1000 MEM1050 MEM1090 MEM1100 MEM1150 MEM1190 MEM1200 MEM1250 and MEM1290 Is in conformity with the provision of the following EC directive including all applicable amendments 93 42 EEC Medical Device Directive Class Hyltebruk 2006 09 14 Contents The E move system Safety instructions Models off e move Assembly off e move Operating the wheelchair with e move Guide to safe operation Transport and disassembly off e move Technical specifications Area of use Product description Guarantee and maintenance Battery Troubleshooting Decon Wheel AB Landerydsvagen 314 22 Hyltebruk Sweden lt 3 decon wheel Tel 46 0 345 408 80 2 Fax 46 0 345 408 95 www decon se info decon se lt 3 decon wheel e move You have now received a new wheelchair with e move wheels To get the most out of your wheelchair and to ensure it meets your needs an authorised prescriber should have tested and adjusted your wheelchair This means that the wheelchair with e move has been adjusted in accordance with your wishes and that your weight and requirements have been taken into consideration We are assuming that this has taken place and that you have also recei
10. el AB Tel 46 0 345 408 80 21 Landerydsvagen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon wheel AREA OF USE e move is an electrically powered unit that is activated using the drive rings Small motors in the hubs are connected to the drive rings When the drive rings are pushed forward the motors are activated and help the user drive the chair e move is suitable for all users with a drive ring operated manual wheelchair During operation the e move motor provides much of the energy needed to run the chair The e move system works both indoors and outdoors The battery capacity depends on where the chair is being used the surface the temperature and so on Under normal circumstances the battery will last for a whole day Remember that the extra power e move gives the user makes the chair liable to overturn when going uphill The maximum user weight is 120 kg The e move may not be used unless the wheelchair s overturn protection is fitted For the CE marking of e move to be valid the following must be adhered to Overturn protection must be fitted Fitting repair or other work may only be carried out by authorised staff or Decon Wheel employees e The pendulum supports must be set so that they can swing freely on a horizontal plane e Users must be instructed to Make sure the pendulum supports can move freely Be careful when driving over obstacles higher than 4 cm Wheelchairs with e move
11. equisites are tyres that are not worn the correct tyre pressure a risk free surface and a maximum user weight of 120 kg You will need help when you have to negotiate e Kerbs requiring the wheelchair to tilt by over 15 e All kinds of obstacle on slopes as the risk of overturning then increases Be extremely careful when crossing busy roads and at railway and other crossings Never drive parallel to tram and railway tracks when trying to cross them as there is a risk of the wheels getting stuck in the tracks It s better to get someone to help you who can quickly push the wheelchair over the street or railway crossing if the wheelchair suddenly stops e g if the batteries have no charge Be careful when driving up ramps onto vehicles When lifting and lowering e move must be disconnected and the parking brakes must be activated On wet surfaces the tyres have less grip on the road and there is an increased risk of skidding Always adjust your driving to the situation at hand Decon Wheel AB Tel 46 0 345 408 80 14 Landerydsvagen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon wheel 1 Start Stop Push the hand rims forward slowly and carefully Be careful so that the chair does not tip up when starting 2 Turning Practise turning around a certain point to learn how the motor reacts 3 Braking The motors also help when you want to apply the brakes Simply push the hand rims
12. ghten them when necessary this applies to all lose parts Wipe the frame with a soft cloth and detergent e Check the chair once a week for cracks in the frame loosening of components loosening breakage of the spokes effectiveness of the brakes deformation of casters and the wear of the tires If any damage occurs please contact Decon Wheel immediately e An authorised person or Decon Wheel must carry out all technical servicing e Only original components or those which meet Decon Wheels specifications are to be used e Store the wheelchair with the battery detached The detached battery should be stored with the protective cap on There is a danger of a short circuit when the connecting portion is exposed Do not store the wheelchair with the e move on where it is subject to rain direct sunlight or high humidity Battery Before charging When you want to charge the battery select a location which 1s e Indoors and well ventilated e 0 40 C e A level and stable surface Warning It is important that the temperature is 0 40 C Do not place the charger near a cooker or in direct sunlight The charger will not start if the temperature is too high or too low Do not charge the battery where there is a risk of the equipment getting wet or humidity Risk of short circuiting and electric shocks Do not place anything onto or extremely close to the battery charger when it is charging The charger may overheat and stop working
13. ion button A figure 2 on the battery the lights indicate the battery s capacity in 5 stages The lights go out automatically after approximately 5 seconds 2 A 3 Decon Wheel AB Tel 46 0 345 408 80 28 Landerydsv gen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon Wheel The battery s capacity lights look like this This indicates 1 If the battery is used regularly from being fully charged the lights will go out one by one 2 When only one light is on the battery must be charged soon 3 Time to charge the battery The battery has an extremely low remaining capacity Replace it or charge it immediately ap seal eee If you have to replace a battery whilst using your chair make sure that the brakes on both wheels are locked before you replace the battery to prevent the wheel chair moving E F F E l E E E E ED a ED Fe hit bie 7 2 3 Decon Wheel AB Tel 46 0 345 408 80 29 Landerydsvagen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 2 decon wheel If some but not all of the capacity lights come on when you press the indication button on a fully charged battery this means that the battery has deteriorated and its capacity has been reduced Battery capacity when you press the indication light Four lights on 1 Deterioration Although the battery s capacity has decreased to 60 80 of its initial capacity it is s
14. it is vital that you equip the wheelchair with parking brakes Always switch e move off and activate the parking brake before moving to or from the wheelchair Never hold on to the pushrims when getting into or out of the wheelchair e move is dimensioned for indoor and outdoor use but a basic prerequisite is that you travel on a stable surface Make sure you are in a safe place and switch e move off before using a mobile phone or a similar device Avoid driving in the proximity of strong electric fields that can cause interference On no account start e move up before receiving instruction from your specialist dealer or a Decon Wheel representative Decon Wheel AB Tel 46 0 345 408 80 6 Landerydsvagen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon wheel Two models of the e move Type A is designed for users who have a strong grip and cover long distances by themselves Type A has an assist ratio of 1 5 Of the total energy supply required the user supplies approximately 40 and e move approximately 60 Type B is designed for users with a somewhat weaker grip Of the total energy supply required the user supplies approximately 25 and e move approximately 75 Type C one hand power for users with only one strong arm that can drive the e move Of the total energy supply required the user supplies approximately 25 and the e move approximately 75 You can see which version
15. l wheelchair Decon Wheel AB Tel 46 0 345 408 80 17 Landerydsv gen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon wheel TRANSPORT AND DISASSEMBLY Your e move is easy to get ready for transport Battery i ere the battery by pressing button A whilst carefully pulling the battery out of its holder Figure 1 Cable 2 Remove the cable from the socket by turning it whilst pulling it carefully upwards Figure 2 2 Decon Wheel AB Tel 46 0 345 408 80 18 Landerydsvagen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon Wheel Wheels The wheels are removed by opening out the handle A to the quick release mechanism and pulling straight outwards Figure1 Take care when removing the right hand wheel The battery holder and switch can easily start to rotate if you do not hold one of them whilst loosening the wheel Figure 2 Be carefully with the e move wheels when you transport them so they don t become exposed for any hits or knocks If iy should transport the wheelchair with the e move installed do not hold the pushrim battery or cable when lifting the wheelchair This may cause damage to the unit 22 24 and 26 wheels You can easily replace the e move with regular 22 24 and 26 quick release drive wheels Open out the handle A and carefully pull out the wheel Figure1 For instructions on how to fold
16. move Operation using e move increases the user s power resources and converts them into brief rotary motion of the motor using sensors in the wheel hubs The power made available depends on the mode the additional power has been set to It does not matter whether the wheelchair is being driven forwards or backwards When driving downhill use of e move assists braking Activation of the system creates a more efficient braking effect The wheelchair s actual driving function is only affected indirectly 1 e as a user you only need to change your driving habits slightly It is important to bear in mind that with outside use the motor must be protected from moisture as far as possible If the drive rings get damp wet a sudden manoeuvre may result in an increased risk of accident Always switch off e move and lock the brakes when getting into and out of the wheelchair Always drive with charged batteries so you do not come to a halt and get stranded with a dead battery If necessary use an extra battery for longer distances Check to make sure your e move wheels have the right tyre pressure for driving namely 6 bar A puncture will significantly affect e move s driving ability If a puncture occurs only continue the trip in an emergency and drive carefully Despite e move being dimensioned in accordance with all current EMC directives electromagnetic fields may affect driving characteristics Mobile phones and other devices that emit elect
17. must always be tested together with the user regarding the wheelchair s maximum clearance capability Each wheelchair equipped with e move must be tested together with the user regarding the tilt function for the rear axle When leaning back the overturn limit is the angle at which the wheelchair will fall backwards The user is not allowed to make any changes on the e move for example install a programmable controller Personnel at Decon Wheel or other authorised personnel should only do these changes PRODUCT DESCRIPTION The e move system is available in two different models Type A Type B and Type C see previous section Every e move has a 24V DC motor fitted to each hub The two motor units are interconnected using a cable Microchips control the power of the two wheels and even out any differences in strength between the users arms The battery is a NiMH nickel metal hydride which is considered the Best Available Technology NiMH batteries have a high capacity and are environmentally friendly Decon Wheel AB Tel 46 0 345 408 80 22 Landerydsvagen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon Wheel GUARANTEE AND MAINTENANCE Guarantee e The complete product has a 2 year guarantee Maintenance e Do not spray water onto the machinery e Wipe clean the wheel axles and lubricate them with a little oil e Tighten the spokes once a year e Check nuts and screws regularly and ti
18. p very abruptly which may create a risk of you falling out of the chair Do not balance an e move chair on the drive wheels using the hand rims This starts the electric motors and you will find it difficult to keep your balance The handrims may become slippery which may make steering the chair difficult if your hands are wet or if you use the chair in the rain If you do not move the handrims for five minutes the system switches off automatically to save the battery Remember that the e move system increases the width of your wheelchair by approximately 4 cm This may prevent you from going through narrow doorways which did not previously cause any problems Remember that the point of balance is changed on e move chairs compared with other models as the battery is fitted on the rear of the chair Sound guide beep a short sound 1 When the system is activated A light comes on on the inner side of the wheel for approximately three seconds 2 When the system switches off automatically as you have not operated the chair for 5 minutes beep beep beep beep beep beep beep beep beep beep beep beep beep beep beep beep four short repeated sounds The battery is starting to run out A light on the inner side of the wheel starts to flash slowly beep a continuous sound 1 The battery has run out The light on the wheel comes on 2 Problems with the electronics the light on the wheel comes on 3 When the power i
19. r and the lead A fuse may have blown Open the fuse box on the side of the battery and check that everything works If not replace the blown fuse with the spare one stored on the side of the battery cover Warning Use the indicated fuses only 30A fuse flat to avoid the risk of the battery catching fire I 2 C Decon Wheel AB Tel 46 0 345 408 80 26 Landerydsv gen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon Wheel 1 The first third and fifth capacity lights flash figure 1 e The battery is not at a temperature suitable for charging Wait until the battery is at a suitable temperature before you charge it 2 The charging light and the reconditioning light on the charger flash in intervals green green yellow or green green green yellow figure 2 e Faulty charger Replace the charger with a new one 2 O H O Decon Wheel AB Tel 46 0 345 408 80 21 Landerydsv gen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 2 decon wheel After charging 1 Remove the battery from the charger when the charging process is complete Always store the battery with its protective cover fitted figure I 2 Pull out the plug Recycling used batteries Despite the fact that this type is the most environmentally adapted battery on the market we recommend that you hand your batteries in for recycling Battery capacity 2 When you press the indicat
20. romagnetic radiation can in certain cases cause incorrect function Likewise e move may cause disturbances in electromagnetic fields This is rare though it can lead to triggering of alarms in older alarm installations e g in department stores or to opening of older automatic doors Decon Wheel AB Tel 46 0 345 408 80 13 Landerydsv gen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon wheel GUIDE FOR SAFE DRIVING When you get your chair with e move fitted to it it is important that you check how it works in a safe and calm place As an e move user you decide which routes you can manage as far as your driving ability and physical ability are concerned Before using e move make sure that the tyres are not worn or damaged and that the batteries are fully charged These safety checks and your driving abilities are important when assessing whether you can get around using e move in the following places e Quays landing sites and moorings roads and locations by watercourses jetties and dams without protective rails e Narrow roads slopes e g ramps and approaches narrow roads close to precipices mountainous areas e Narrow and or steep sloping paths by busy roads or near to precipices e Leaf and snow covered or icy stretches e Ramps and lifting devices With e move you can manage uphill and downhill slopes in accordance with the wheelchair manufacturer s specifications The basic prer
21. s switched on whilst you move the handrims The light on the wheel flashes rapidly 4 No contact between the right and left wheel The light flashes rapidly Decon Wheel AB Tel 46 0 345 408 80 11 Landerydsv gen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon wheel Use of e move Activation of the system 1 Lock the wheelchair brakes 2 Activate e move by pressing the button on the right side of the chair A beep will then be heard and within three seconds the system will be activated At that point the red warning lamp on the left wheel will turn off If you apply force to the drive rings while simultaneously switching on the current you will hear a warning signal long beep and the wheelchair will not start Switch the current off and on again without touching the drive rings Then wait until the system has been activated before applying force to the drive rings 3 Release the wheelchair brakes 4 It is important that the user be aware of how the wheelchair works before starting to drive study the wheelchair manufacturer s safety instructions in the directions for use To drive the wheelchair straight ahead push the wheels evenly Brakes on both Warning lamp wheels left wheel Decon Wheel AB Tel 46 0 345 408 80 12 Landerydsv gen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se decon wheel Directions for driving using e
22. t discharged completely and then charged the battery life will be extended 1 Place the battery in the charger 2 If the battery requires reconditioning the yellow reconditioning light will flash C figure 2 If the red start button D figure 2 is pressed whilst the reconditioning light flashes for about 10 seconds the reconditioning light will come on and the reconditioning process will start 3 The battery s capacity lights indicate the stage in the charging process in the same war as during quick charging Reconditioning time varies according to battery capacity The process takes approximately 3 13 hours 3 B E E Fike 2 4 Decon Wheel AB Tel 46 0 345 408 80 25 Landerydsvagen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon wheel Charging problems If the battery or charger develop any faults during charging the green charging light and the reconditioning light on the charger and or the battery s capacity lights will start to flash 1 The charging light and the reconditioning light flash simultaneously figure 1 e Faulty battery Replace the battery with a new one 2 The fourth capacity light on the battery starts to flash figure 2 e Faulty battery Replace the battery with a new one The charging light A and reconditioning light B flash at one second intervals This may be a contact fault Check whether there are dust or other particles between the charge
23. till usable 2 Do this If it is important for you to cover long distances without needing to charge the battery you should replace it Three lights on rats aaa The battery s capacity has decreased to 60 of its initial capacity and 1s barely usable Do this Replace the battery with a new one Important Contact your supplier for advice if only 3 lights are on after charging and the battery is less than one rear old 2 F E Fit Decon Wheel AB Tel 46 0 345 408 80 30 Landerydsvagen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon Wheel Battery storage e Do not store the battery in the holder on the wheelchair when the chair is not in use Store the battery indoors with the protective cover on e Do not store the battery where there is a risk of it getting wet or being exposed to direct sunlight e Ifthe battery is to be stored for a long time charge it and store it where it is not too hot or too cold e Do not leave the battery outside in the cold or inside a warm tar for long periods of time e Store the battery out of reach of children If the wheelchair has been driven on a wet surface and the machinery has become wet wipe it with a dry cloth to prevent certain components from rusting Decon Wheel AB Tel 46 0 345 408 80 31 Landerydsvagen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon Wheel TROUBLESHOOTING user or
24. ved instruction and advice on how to use your wheelchair in everyday situation Before you start using your e move wheelchair look through these directions for use They are full of good advice and setting options e move 1s an electrically powered auxiliary motor that is activated by the drive rings e move has been tested and approved at TUV in Germany We hope you will be satisfied with e move Read through all of the directions for use These provide important safety information Decon Wheel is only responsible for product changes made by authorised staff We reserve the right to make changes to the equipment and specifications Delivery check Check that all parts are in agreement with the delivery note You must immediately notify the carrier of any damage during transportation Remember to keep the packaging until the carrier has checked the goods and a settlement has been reached Decon Wheel AB Tel 46 0 345 408 80 3 Landerydsvagen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon Wheel e move e move consists of the following parts A Drive wheels 2 B Battery 1 C Battery cover D Battery charger On the right drive wheel you will find the operating button E and the battery holder F Decon Wheel AB Tel 46 0 345 408 80 4 Landerydsv gen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon wheel e move s components
25. you have simply by looking at the handrims Type A has olished stainless steel handrims and type B has black plastic covered ones There is also a number in the battery holder e g XA4G If the fourth character is G you have type A and if the fourth character is H you have type B Decon Wheel AB Tel 46 0 345 408 80 1 Landerydsv gen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon wheel Installing the e move Make sure the correct adapter plate is fitted to your wheelchair before installation 1 Start fitting e move to your wheelchair The wheels have a quick release axle QR axle Fold the quick release handle when installing the wheel see picture 1 2 When installing the right wheel you need to lift the wheelchair up a little with your left hand while simultaneously grasping the bottom of the battery holder to stop it from rotating picture 2 Then insert the QR axle picture 3 It is very important that the axle be pressed in far enough otherwise the QR axle may come off See illustration D Decon Wheel AB Tel 46 0 345 408 80 8 Landerydsvagen Fax 46 0 345 408 95 314 22 Hyltebruk www decon se Sweden info decon se lt 3 decon wheel Cable 3 The cable A hanging loose in the right wheel then needs to be plugged into the contact B It is important that the arrow on the cable be aligned with the small line on the contact gt 1 4 The battery will b

e-move

Contents

Download Pdf Manuals

Related Search

Related Contents