Untitled - Nova Babycall
Contents
1. VUS LA VLIS LOLNOVaAa gt UHU RIALI VIS LAU VLS LUINUVA sU0UU0O MarR LALL Fig Abb Afb 1 Fig Abb Afb 2 LIU I VO a TI VisionNova 5 2009 Layout 1 30 10 09 n Side 3 Setup 1 Camera The camera uses either the integrated battery or the accompanying AC adapter The battery charges when the AC adapter is used The power indicator LED flashes while the battery is charging red if the camera is off and green if it is turned on When the camera is fully charged the indicator switches off or if the camera is turned on is a constant green The camera or the monitor can also be charged from a PC using the included USB GB cable 1 1 Camera on off Press On Off for 2 seconds and the camera switches on The Power indicator LED is lit Press On Off for 2 seconds and the camera switches off The Power indicator LED goes out 1 2 Integrated battery If the power is disconnected the camera starts using the battery auto matically When the battery is low the Power indicator LED will change from green to red 1 3 Night vision The camera has 8 infrared LEDs in order to capture clear images at distances of up to 3m in total darkness These are activated automatically when the inbuilt light sensor registers that the light is inadequate Note The image changes to black white when night vision is active 1 4 Assembly Screw the accompanying stand to the camera and ti2. amera or monitor is running on battery power use the adapter and charge the batteries Press and release the Reset button use a paperclip or needle If you are only receiving sound check that Close Video Time is set to Never and that Voice Activation is set to Off You can also select Restore settings in the menu in settings If Searching is shown in the display read the Search Child chapter above If reception is poor or the image freezes If there is a microwave oven between the camera and monitor make sure it is turned off Move the camera or monitor away from wireless routers or computer equipment Try moving the camera and monitor closer to each other The range is up to 300m if there is clear line of sight between the equipment depending on local conditions The range is considerably reduced by physical obstacles between the units Storage and maintenance Make sure that the equipment and accessories are out of the reach of children Avoid touching the lens Fingerprints or dirt on the lens surface will result in poor image quality If the lens gets dirty try blowing off the dust or dirt or wipe carefully with a soft dry cloth Ensure the equipment is not exposed to moisture Moisture may result in corrosion of the electronic circuits Do not use the equipment in dirty or dusty environments Do not use or store the equipment in hot conditions Raised temperatures reduc
3. e the life of the electronics and can cause deformed or melted plastic Do not store the equipment in very cold conditions This could cause condensation when they return to normal temperatures Condensation can damage the circuit boards Do not attempt to open the equipment All repairs must be carried out by professionals or the warranty will be voided Avoid dropping the equipment or exposing it to severe jolts Only use the included AC power adapters Otherwise the equipment may be damaged GB
4. es that you have chosen to use English GB Zoom in Select the desired area with the arrow buttons and press OK Menu You can return to the normal image by choosing Zoom in again Brightness Choose the desired screen brightness using the arrow keys V A Voice Activation see also Close Video Time in Settings This function can be used to select whether the sound should be transferred continually or only when there are sounds from the child If the function is activated status set to on and Close Video Time is set to something other than Never the screen will also turn on if the child makes a sound Status You can choose Off or On Sensitivity You can choose Low Medium or High Alarm You can choose which alarm you want to set There are two choices for each alarm Alarm status Off or On Alarm time Choose a time for the alarm Use the OK Menu button to select hours minutes and to store the time Note The alarm will not be active until you turn it on by selecting Alarm status VisionNova 5 2009 Layout 1 30 10 09 a Side 6 Settings This provides a new menu for you to choose from Date and time Date Set today s date Use OK Menu to move between the fields Time This sets the clock and is shown in 12 24 hour format depending on what you choose in the next menu item GB Time format Choose 12 or 24 hour format Close Video Time Choose whether the screen should shut down and a
5. fter how many seconds This function operates alongside the Voice Activation option and you choose how many seconds the screen should show the image for before shutting down This function can be used to lengthen battery life as the monitor uses less power when the screen is off Note If you set it on anything other than Never and Voice Activation is off status set to Off the screen will always be turned off and the equipment will work like an ordinary Babycall The screen switches on again if you press the OK Menu button Search Child The camera and monitor are coded jointly at the factory If Searching shows on the screen even if they are very close to each other you can re establish the coding by selecting Yes in this option and pressing the Reset button on the camera When the screen shows that the ID has been stored press the OK Menu button Repeat the operation if it not successful Reset Settings Use this option to restore the default settings for brightness and voice activation or if you have other problems Language You can select the language for menus and system information VisionNova 5 2009 Layout 1 30 10 09 n Side 7 Troubleshooting If no image is visible Check that the camera and monitor are turned on Check that the link indicator is green If not search for the camera again see above Check that the adapter plugs are all the way in If the c
6. ghten the nut Find somewhere to place the camera and point the lens at the area that is to be monitored Make sure that the child cannot reach the camera or the adapter cable The camera can be turned in all directions and is locked released with the large screw on the back of the stand If the camera is to be attached to the wall check its placement before fixing in position VisionNova 5 2009 Layout 1 30 10 09 a Side 4 GB 2 Monitor Yall Thu 07 10 09 59AM a 2 1 LCD screen Signal indicator This behaves like a mobile phone showing whether the signal is strong or weak It is normal for the signal strength to vary even over short distances PS Alarm symbol Shown if an alarm is set Battery indicator Shows the remaining battery life using 4 levels Becomes transparent and flashes when the battery is empty The monitor uses a rechargeable 3 7V 850mAH Li ion battery included or one of the included AC power adapters Inserting batteries Note The Li ion battery that is included should be charged for 10 hours before being used for the first time 1 Open the cover of the battery compartment on the back of the monitor 2 Insert the battery so that the contacts on the battery touch the contacts inside the battery compartment printed side up di Put the cover back in position 4 Turn on the monitor by pressing the On Off button for 3 seconds The Power indicator will light 5 Press the On Off button fo
7. r 3 seconds to turn it off Note 1 The Power indicator is green when the battery is charged and red when it is empty Note 2 Remove the battery if the monitor is not going to be used for a prolonged period of time Mains power 1 Plug one of the included AC power adapters into a power socket and into the socket on the side of the monitor The battery is now charging This is shown by an animated symbol on the screen The battery is fully charged when the symbol is constant Note When the connection between the camera and the monitor is functioning properly the link indicator will have a green light If the connection is broken this will go out 2 2 Adjusting volume Press w or A to adjust the volume VisionNova 5 2009 Layout 1 30 10 09 a Side 5 2 3 Sound indicator The LEDs show whether the child is making a sound even if the volume is adjusted down 3 0 Menu The monitor has a self explanatory menu You enter the menu by pressing the OK Menu button navigating with the arrow buttons w a and selecting the indicated item with the OK Menu button You move back wards or out of the menu by pressing the On Esc button If no button is pressed for 20 seconds the menu closes The factory setting for the menu is English To select another language do the following Press OK Menu Choose Settings Choose Language and use the arrow keys v A to select Press OK Menu to store this setting The rest of the user manual presum
Download Pdf Manuals
Related Search