User`s Manual - Canbuilt Mfg.
Contents
1. wht CANBUILT MFG cA 1 SAFETY RULES e This Instrument is designed for indoor use at temperatures between 32 F to 122 F 0 C to 50 C altitudes up to 6500 ft 2 000 m and 10 to 90 relative humidity To ensure that the instrument is used safely follow all safety and operating instructions in this manual If the instrument is not used as described in this operation manual the safety features of this device might be impaired To avoid personal injuries and damage to the instrument use ex treme caution when working around hot machine or engine parts like radiators exhaust manifolds catalytic converters etc 2 INTERNATIONAL SYMBOLS Important information Refer to the User s Manual 2 __ CAUTION Laser Radiation AVOID DIRECT EYE EXPOSURE 1mW Output at 630 670 nm Class Il Laser Product 3 TECHNICAL SPECIFICATIONS 3 1 General Specifications Display 3v2 digits LCD Max of 1999 display with measuring unit indicators Laser On indicator and backlight Resolution 0 1 to 1 C or 1 F Operating Temperature 32 F to 122 F 0 C to 50 C Response time 400 mS approx Target Size Field of View 8 1 optics ratio with a 1 min target Repeatability 0 5 of reading plus one digit Emissivity Fixed at 0 95 Laser Pointer Laser Diode lt 1mW output wavelength 630 670 nm Class II 9 volt battery type NEDA 1604 IEC6F22 IEC 6LR61 Power Source Battery life Approx 20 hours w alkaline batterie2. F press the LASER button when the unit is ON The laser sight indicator will appear on the display when the laser sight function is ON Note In order to prevent injuries from an unexpected laser beam when the instrument is turned ON every time the unit is turned ON by pressing the Measurement Trigger the laser pointer is turned OFF and if needed should be turned ON as explained above 5 MAINTENANCE 5 1 Battery Replacement Pull to open battery cover e When the battery is low and needs to be replaced the Low Bat tery Warning symbol will appear on the lower left hand side of the display e TO replace the battery open the battery compartment cover located at the front of the handle by pulling on the finger indents near the trigger and remove the battery e Replace with a new 9 V alkaline battery type NEDA 1604 or IEC6F22 observing the proper polarity when connecting to the battery terminals e Close the battery cover 5 2 Cleaning 5 2 1 Lens cleaning Debris or dirt on the lens may cause obstruction and reduce the accuracy of the thermometer If this occurs either wipe the lens with a Q tip moistened with water only or blow off the loose particles with clean compressed air Do not use solvent on the lenses as it may become damage 5 2 2 Exterior cleaning Periodically wipe the case with a soft damp cloth and mild household cleanser Do not use abrasives or solvents Ensure that no water gets in
3. s Power Saving Automatic shut off after 7 seconds Wavelength 6 to 14 um Dimensions 3 2 x 1 6 x 6 3 82x 41 5 x160 mm Weight 6 5 oz 180 g with battery Accessories Users Manual Soft Pouch and 9 V alkaline battery 3 2 Measurement Specifications e Accuracies are of reading number of least significant dig its at 23 C 5 C ambient temperature with less than 75 RH C ruon ange _Aesurcy _esoision 0 1 C 20 C to 200 C 2 0 2 cosso zo Temperature C 58FF10 4P 0 1 F 4 F to 200 F 2 0 4 rror 20 Temperature F LT102 Infrared Thermometer with Laser Sight 4 OPERATION 4 1 Instrument Description 1 Laser pointer 2 IR Sensor 3 LCD Display 4 F Select Button 5 C Select Button 6 Backlight ON OFF Button 7 LASER ON OFF Button 8 Measurement Trigger 9 Battery compartment cover 4 2 Display Description Display Hold Mode Continuous Scan Mode Laser On Indicator Emissivity Coeficient C Scale Selected F Scale Selected Temperature Readout Low Battery Warning 4 3 Measurement Procedures 4 3 1 Temperature Measurement e Hold the instrument by its handle point the IR Sensor to the area or object to measure and press the Measurement Trigger e While the Measurement Trigger is kept pressed the thermometer is continuously measuring the temperature of the object pointed at with the IR Sensor e When the Measuremen
4. side the instrument to prevent possible shorts and damage 6 WARRANTY One year limited warranty excluding batteries and fuses For details see Standard Warranty Information on our web page or you may request a printed copy
5. t Trigger is released the instrument will hold the last temperature reading for 7 seconds and then shut off automatically 4 3 2 Field of view or measurement target area SPOT D 8 a e To take the most accurate temperature measurements make sure that the target object is larger than the unit spot size at any given measuring distance e The smaller the target the closer you should be e For maximum accuracy make sure that the target area is at least twice as large as the spot size 4 3 3 Selecting Temperature Units C F Make sure the instrument is turned ON if not press the Measurement Trigger Pressing the F button will select Fahrenheit Degrees as the temperature measurement units Pressing the C button will select Celsius Degrees as the temperature measurement units Temperature reading and measurement units will display on the LCD 4 4 Other Functions 4 4 1 Display Hold e The instrument will automatically hold the last temperature reading after the Measurement Trigger has been released for approx 7 sec 4 4 2 Display Backlight e Make sure the instrument is turned ON if not press the Measurement Trigger e Pressing the Backlight ON OFF Button will turn the display backlight ON or OFF e When the backlight is not needed turn it off to prolong battery life 4 4 3 Laser Pointer N CAUTION Laser Radiation is emitted Avoid direct eye contact e To turn the laser sight ON or OF
Download Pdf Manuals
Related Search