SeeUPS2020 Plus User Manual
Contents
1. from the schedule Add Adds an item to the schedule Cancel This button is used to exit the log window without saving any changes OK This button is used to exit the shutdown window and save any changes N O ool e Please note You must click Add to add the item to the schedule 8 Turn Off Select the day date and time that you want the system to shutdown This is optional to use and has no effect on whether your computer will shut down during a power failure 9 Weekly Setting Allow you to schedule a shutdown startup based on the day of the week SeeUPS2020 Plus Log Menu See Figure 6 1 Event Option Button When this option is selected the log will display different SeeUPS2020 Plus events such as power failure program start and program end 2 Log Display This area displays the information as selected by the Event Closed Application Information or Data Record option button Clear Clears the selected log Cancel Exits the screen without saving any changes OK Exits the screen and saves any changes Data Record Option Button When selected the log will display a record of the items that are shown in the main window such oo eS as input output voltage and temperature 7 Closed Application Information Option Button When this option is selected the log will display the names and locations of any ere ae Poteet ae G E 2 ee ee cone Oe ee es a i bel 1 eee me pede SS eS eee a i Per s Pe EET2. E files that were auto saved by the software Entire contents copyright 2006 Legacy Power Conversion Inc All rights reserved Reproduction in whole or in part without permission is prohibited
3. Lee ISION SeeUPS2020 Plus is designed for use with Windows 95 Windows 98 Windows Me Windows NT Windows 2000 and Windows XP It works in conjunction with the UPS to provide full protection of valuable computer systems applications and data In the event of a power failure SeeUPS2020 Plus automatically saves and closes open files under auto assigned file names or existing files names after software controlled delay The computer and UPS are automatically shutdown to conserve battery power Files with auto assigned names will be saved under C PCTemp where C is the name of your main hard drive Files that have previously been saved will be saved in their original location SeeUPS2020 Plus Software User s Manual KO9 1120002 00 SeeUPS2020 Plus is equipped with a Scheduled Shutdown feature that can automatically save and close open files and then shutdown the computer and UPS at a user specified date and time as well as start the computer at a user specified date and time Use of this feature is optional and is not required for the power failure shutdown to occur The use of the SeeUPS2020 Plus software is optional The UPS unit will provide full surge suppression and battery backup without the software You must use the software if you wish to have the automatic shutdown feature Legacy UPSs can provide surge suppression and battery backup without the software However if you need to schedule for UPS Auto shutdown then it is n
4. S and an open serial port on the back of the computer Note You must use the serial cable that was supplied with the unit 8 Plug the UPS into an AC outlet turn the UPS on and then start your computer 9 Click on Start pointto Settings and then click Control Panel 10 Double click on Add Remove Programs 11 Insert the SeeUPS2020 Plus CD into the CDrom drive and then click Install 12 Follow the on screen instructions 13 When the installation is completed remove the CD For Windows 2000 1 Click on Start point to Settings and then click Control Panel 2 Double click on Power Options 3 Onthe UPS Tab click Select 4 Inthe UPS Selection Dialog Box under Manufacture rs click None 5 Exit to the desktop and shutdown the computer 6 Turn the UPS off and unplug it 7 Connect the serial interface cable to the UPS and an open serial port on the back of the c o mputer Note You must use the serial cable that was supplied with the unit 8 Plug the UPS into an AC outlet turn the UPS on and then start your computer 9 Windows will find new hardware 10 Insert the software disk into the CDrom drive and follow the on screen instructions 11 When the installation is completed re move the CD For Windows XP Home and Professional D U eS Sy 7 8 9 10 11 Click on Start and then click on Control Panel Double click on Power Options then click on the UPS tab Set the manufacturer to None Exit t
5. ecessary to install the software USB Function Optional 1 Tumoff your UPS 2 Connect the serial interface cable to your UPS and the open serial port on the rear panel of the computer If you would like to use USB interface please connect the USB adapter with the Serial Cable then connect the USB to your computer See the figure 3 Plug the UPS into an AC outlet tum the UPS on and start your computer 4 Follow the instructions on the User s Manual to complete the installation a N tepals p a i J irs 4 at For Windows 95 98 ME E 1 Tum the UPS off and unplug it 2 Connect the serial interface cable to serial port on the UPS and an open serial port on the back of the computer Note You must use the serial cable that was supplied with the unit Plug the UPS into an AC outlet tum the UPS on and then start your computer Windows will find new hardware Insert the SeeUPS2020 Plus CD into the CDrom drive then follow the on screen instructions When the installation is completed remove the CD Oa Kw For Windows NT Click on Start point to Settings and then click Control Panel Double click on the UPS Icon Remove the check mark from the box labeled UPS is installed on and Click OK Acknowledge the message that the UPS is in an unknown state Exit to the desktop then shutdown your computer Turn the UPS off and unplug it NO a fF WON gt Connect the serial interface cable to serial port on the UP
6. o the desktop and shutdown your computer Turn the UPS off and unplug it Connect the serial interface cable to serial port on the UPS and an open serial port on the back of the computer Note You must use the serial cable that was supplied with the unit Plug the UPS into an AC outlet turn the UPS on and start your computer Windows will find new hardware Insert the SeeUPS2020 Plus disk into the CDrom drive Follow the on screen instructions When the installation is completed remove the CD When the installation is completed the SeeUPS2020 Plus software will appear on your screen for a few seconds and then minimize It will appear as a blue and white battery icon located in the system tray near the clock SeeUPS2020 Plus Icon SeeUPS2020 Plus Main Menu See Figure 1 Log Click on the log button to open the Log Window Power Click on the power button will exit the software window Minimize Button Click this button to minimize the software Setup Click the setup button to open the Setup Window Model This shows the model of the UPS that is being used Version This shows the hardware version Status Bar The area display messages about the status of the software Schedule Click this button to open the Schedule Window Oo NOAA FWD gt SeeUPS2020 Plus Main Window Description see Figure 2 1 Battery Level This indicator displays the current charge on the battery The indicat
7. or will display a red color when a power failure occurs 2 Input Voltage This reading shows the current input voltage of the utility power The input normally appears in green but will turn red if the input voltage is not operating normally 3 Frequency This indicator displays the frequency of the utility power 4 Scheduled On SeeUPS2020 Plus can be scheduled to turn your computer system on This indicator displays scheduled on settings that will occur in the next seven days 5 Final Countdown When SeeUPS2020 Plus detects that the utility voltage is not operating normally the final countdown will begin When the countdown reaches zero SeeUPS2020 Plus will save and close any open files and then shut down the operating system in an intelligent and orderly manner 6 Approximate Backup Time This indicator shows the approximate amount of backup time that is available based upon the battery capacity and the load on the system This indicator can appear in red yellow or green depending upon the number of minutes available 7 Scheduled Off SeeUPS2020 Plus can be set to automatically shutdown the computer system at a user specified time scheduled off settings that are set to occur within seven days will be displayed 8 Temperature This indicator displays the internal operating temperature of the unit If the temperature exceeds 158 F 70 C the indicator will change from green to red 9 Load Level This indicator shows the of ca
8. pacity of the battery outlets that is currently being used This indicator appears in green or gray but will turn red if the load exceed 90 10 Output Voltage This indicator shows the output voltage of the UPS SeeUPS2020 Plus Setup Window See Figure 3 1 UPS is Installed On This shows the current port that the UPS is using The port assigned to the UPS needs to be used exclusively for the SeeUPS2020 Plus software 2 Buzzer On This toggles the audible alarm on and off 3 Play Sound Voice is being played when the UPS is turning on or facing a power outage 4 Time between Power Failure and Shutdown This is the user controllable delay between when the power fails and the software starts the shutdown process If unchecked the unit will run on battery until the low battery signal is received 2 minutes of backup time remaining and then start the shutdown process 5 Time between Power Failure and Initial Warning This setting determines the delay between when the power fails and the first audible alarm Pasi iLi Tyi 6 Delay between Warning Messages User adjustable setting for the delay between the audible alarms that occur during a power failure ei a aj e 7 UPS Self Test Allows the user to test the UPS without having to unplug the unit from the wall When Run is clicked the unit will switch to battery PAETE ATO aa EF eS ee F power and the unit will beep ee 8 About This button will display information about the software as
9. well as contact information 1 9 Advance This button opens the Advanced Setup Window 10 Default Click this button to return the software to original factory settings 11 Cancel This button exits the window without saving changes 12 OK This button exits the window and saves changes SeeUPS2020 Plus Advanced Setup See Figure 4 Low Battery Voltage This sets the low battery cut off level The user can slightly extend the UPS run time by adjusting this setting High Voltage Failure Sets the upper level where the UPS will switch to battery Low Voltage Failure Sets the lower level where the UPS will switch to battery Battery Mode Output Voltage Sets the voltage that the unit will output when running on battery Default Restores the settings to the factory defaults Cancel Exits the window without saving changes OK Exits the windows and saves changes Cold Start When enabled the UPS can start in the absence of AC power To maximize battery life it is recommended o No M eO MND c to keep this disabled SeeUPS2020 Plus Schedule Menu See Figure 5 1 Special Setting This setting allows you to schedule a one time startup shutdown 2 Schedule Display This area displays the days dates and times of any scheduled startups and shutdowns 3 Turn On Select the day date and time that you want the computer system to restart Can only be used in conjunction with a scheduled shutdown Delete Delete the selected item
Download Pdf Manuals
Related Search