Characteristics Caution Charging Discharging LED
Contents
1. SWIT High Load Rechargeable Li ion Battery Pack USER MANUAL SWIT Electronics Co Ltd Characteristics 1 High power output Li ion battery pack rechargeable 2 4 step LED power indicator 3 D tap DC output and charging socket 4 Build in multiple protective circuit design Caution 1 Never attempt to open the battery pack 2 Use SWIT charger or the chargers recommended by SWIT 3 Please make sure the battery mount on camera could endure high current otherwise it might damage the mount or battery Keep the battery pack terminals clean Never short circuit the battery pack terminals Never expose the battery pack to rain fire or moisture Never expose the battery pack to temperature above 60 C Avoid strong mechanical shock The battery pack may become warm in use or while being charged This is normal OMANDa A Charging 1 The battery pack is not fully charged when it is purchased Charge the battery before use 2 Use SWIT charger or the chargers recommended by SWIT 3 The battery pack should be charged within a temperature range of 0 40 C Discharging 1 Fully charged battery pack will discharge naturally and please use it as soon as it gets charged 2 At low temperature the running time of battery pack usually decreases Tel 86 25 85805753 Fax 86 25 85805296 http www swit cc E mail contact swit cc 3 The internal impedance of battery pack will be greater at low temper2. ature which may cause the automatically circuit cutting 4 According to the using conditions please set the camera low battery warning voltage at 13 14V cut off voltage at 12 13V LED indicator 1 The four step LEDs indicate the remaining capacity when press the CHECK button 2 The indicator may not be accurate when the battery is powering on the camera 3 When only one LED indicates please charge the battery as soon as possible DC socket The D tap DC socket can be used as 14 4V DC output or SWIT S 3010B charging input 1 Open the rubber cover and plug in D tap lead to DC output or charge 2 Close the rubber cover when disconnected to keep the socket away from dust Self protection and Re activate The battery pack has multiple protective circuits and will cut off power automatically when overload or any abnormal detected Mount the battery pack to any SWIT charger it will be re activated and get charging normally Storage Please keep in cool dry and clean place Specifications Nominal Model Mount Type Capacity Max output Dimension Mass voltage S 8210A Gold Mount 14 4V 115Wh 8Ah 150W 12A 165x90x53mm 900g S 8210S V mount 14 4V 115Wh 8Ah 150W 12A 165x90x51mm 900g S 8260A Gold Mount 14 4V 172Wh 12Ah 180W 15A 165x90x68mm 1300g S 8260S V mount 14 4V 172Wh 12Ah 180W 15A 165x90x66mm 1300g 12 05
Download Pdf Manuals
Related Search