PIXAPRO® POWERPACK Flash Cable
Contents
1. PIXAPRO POWERPACK Flash Cable Foreword Thank you for purchasing this PowerPack cable This cable is made of high quality wear resistant and highly insulated wires It is designed to connect to the PIXAPRO PowerPack Dual Output to a flash This user manual applies to all models of PowerPack cable e Foreword e Warnings e Cables Compatibility e Instructions for Battery A Please use according to instructions as there is high voltage output on both terminal ends A Please check the surface of cable carefully before use Do Not Use if cable is damaged A Homemade cablse should not be used on PowerPack Dual Output Cable Compatibility Consumers can choose different flash cables compatible with corresponding flashes according to their own needs Based on the compatibility the available flash cables are listed as below Canon Nikon Sony and Metz Canon Cable Nikon Cable Instructions for Battery AA Batteries see the chart column AA Batt s Sony Cable Metz Cable Some flashes require that you install AA batteries into the battery compartment for powering the inner circuits even when using the flash power connector cable See the Chart If AA batteries are required the PIXAPRO PowerPack will nevertheless provide most of the power required for the flash In dedicated flash modes the flash unit will draw power from AA batteries too This is down to the design of the flash not the PowerPack itself2. Refer to the list of specific instructions for your flash listed in the Table gt Compatibility of PowerPack Cables Compatibility of PIXAPRO PowerPack Flash Cables Flash Cable Flash Model AA Batt s Special Instruction Cannon 600EX RT 430EZ 540EZ CANON CABLE 550EX Cannon 580EX 580EX Il and other flash model with same type of input power port Nikon SB910 SB28 EURO SB28DxX NIKON CABLE SB80DX SB800 SB900 and other flash model with same type of input power port Sony HVL F58AM and other flash model SONY CABLE with same type of input power port Metz 58AF 1 58AF 2 C N OP P S METZ CABLE and other flash model with same type of input power port Switch on Flash Switch on Flash Switch on Flash Switch off flash and the connected battery pack will power the flash C ROHS ad 82 APB820L0 00 VB Made in China
Download Pdf Manuals
Related Search