Walker User Manual - Electro Craft
Contents
1. 2 Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply MAINS AC OPERATION The wires in the mains lead are coloured in accordance with the following code GREEN amp FUSE YELLOW Earth if there is earth cable BROWN BLUE Live Neutral IMPORTANT As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The wire which is coloured green and yellow must be connected to the terminal which is marked with the letter E or by the earth symbol or coloured green or green and yellow The wire which is coloured blue or black must be connected to the terminal which is marked with the letter N or coloured Black The wire which is coloured brown or red must be connected to the terminal which is marked with the letter L or coloured Red For continued protection against risk of fire replace only with same type and rating of fuse ASTA approved 5A 250VAC fuse CAUTION TO PREVENT ELECTRIC SHOCK DISCONNECT FROM THE MAINS BEFORE REMOVING COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL SAFETY PRECAUTION THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS WHEN NOT IN USE DO NOT ALLOW THIS UNIT TO BE EXPOSED TO RAIN O2. Preferred Language By pressing the lt or gt buttons the preferred audio description language Is being changed This setting can be used only if it is available HDCP In the Configuration Menu highlight the HDCP item by pressing a or YV buttons Use the lt or gt buttons to set the HDCP as On or Off Low Power Use v or a button to select Low Power and then press lt or gt button to set this setting as Yes or No To save energy Low power option should be selected as Yes Automatic Power Down Press v or a button to select Automatic Power Down Use lt or gt button to set the Automatic Power Down to Yes or No If you don t use STB for a long time the box will switch off Configuring Language Preferences e You can operate the TV s language settings using this menu e Select Language from Setup menu and press OK to continue Language Settings Mew Primary Auda Language Secondary Aube Language Primary Sultitle Language Secondary Subtitle Language Primary Teletest Language Secondary Teletext Language Gude hes LEFTIRIGHT then OK to sel the language sedin mers cE Language Settings Installation Options Use Y or a buttons to highlight the menu item that will be adjusted and then press lt or gt button to set NOTE Audio Language is used for selecting the soundtrack of a channel Primary
3. Contents Safety Information Preparation Introduction Safety Precautions Power Cord Symbols in this Instruction Book Batteries Safety Information amp Getting Started Accessories included Batteries Features Viewing remote control Connections on the Set Top Box Inserting Batteries in the Remote Control Connecting the Set Top Box to a TV Set Power Connection Antenna amp Satellite Connection Power On Off Important USB Connection Precautions First Time Installation Changing Channels On Screen Information Instant Recording Time Shifting Pause Live Recording Basic Features General Operation Instant Recording Time Shifting Menu System Viewing the Main Menu Managing Stations Channel List Operating the Channel List Selecting a Specific Channel Deleting Channels Deleting Multiple Channels Menu System Channel List Renaming Channels Adding Locks to Channels Locking Multiple Channels Setting Favourites Viewing Electronic Programme Guide EPG Event Options Select Channel Record Programme Delete Timer Configuring Timers Channel list continued Electronic Programme Guide Recordings Library Play Options Configuring Settings Configuration O CO OMOONN OOF RW Ew P PPO PPP N 10 11 12 12 12 12 12 13 13 13 13 13 13 13 13 14 14 14 14 14 15 15 15 15 15 16 16 16 16 Country Timers Recordings Library Output Settings Receiver Upgrade Menu Locking Manag
4. rechargeable batteries in the correct polarity Don t try to recharge non rechargeable batteries and under no circumstances throw them into fire Danger of explosion Do not use unequal batteries old and new Alkaline and carbon etc simultaneously lf you will not use the device for a long time remove the batteries and store the device in a dry and dust free place Improper use of batteries may cause an explosion or leakage If the batteries have leaked use gloves and clean the appliance thoroughly with a dry cloth Batteries should not be exposed to heat such as sunshine fire or the like e 5000 channels TV and Radio programs e Media Browser USB 2 0 Support e DVB T DVB S2 Compliant e HDMI Output 576p 720p 1080i resoluitons support e Channel lock e Present Next event information 7 DAY EPG e Recording timers e Mheg support e Parental lock at menu e Signal strength bar for transponders e Multi language audio support e Digital audio output optic e Teletext function support DVB e Resetting to factory settings option e TV Scart e Ku band reception 10 7 12 7 GHz e Ka band reception 26 5 40 GHz Requires Kaband LNB installation on dish e LNB Control Horizontal vertical polarity switching 13V 12 825 14 175 and 18V 17 575 19 425 0 22 kHz switching tone burst A B switching for dish selection DISEgC 1 2 e Selectable satellite configurations Presets ASTRA HOTBIRD TURKSAT 2A 3A
5. of previous day PR button Next day Displays the programmes of the next day Yellow button Zoom Expands programme information INFO Details Displays the programmes in detail e Records the selected programme Numeric buttons Jump Jumps to the preferred channel directly via numeric buttons OK Watch Watchs the selected programme g Scrolls page left E Scrolls page right Text Search Displays Guide Search menu O Now Shows the current programme SUBT Choose genre Event Options In EPG menu press the OK button to enter the Event Options menu Event Options Set Reminder Record Select Channel Using this option you can switch to the selected programme Record Programme Delete Timer After you have selected a programme in EPG menu press the OK button and Event Options screen will be displayed Select Record option and press the OK button After this operation a recording becomes set to the selected programme To cancel an already set recording highlight that programme and press the OK button and select the option Cancel Timer The recording will be cancelled Configuring Timers Select Timers from the main menu and press OK button Timers Wed 2902 1526 bane sat tet Toscaran het och sattst O 20480 Hii ked 714 MB Reserved 1705 MA Free 0 MB Chai e eat neo EN To add a timer press the YELLOW button on the rem
6. 9 10 Legacy QPSK demodulator decoder e 1 45 MBaud DVB S 5 30 MBaud DVB S2 VIDEO ALL MPEG 2 MP ML Video Decoder Aspect Ratio 4 3 16 9 with pan vector RGB analogue outputs BW 2 5MHz at 0 5 to 5 MHz sweep signal CVBS analogue output MPEG 4 H 264 AVC HP L 4 0 MP L 4 0 HD H 264 AVC MP L 3 2 HP L 3 2 SD MPEG 2 MP HL MP ML SD MPEG1 Layer 1 and 2 Sampling frequencies supported 32 kHz 44 1 kHz or 48 kHz Output can be programmed as STEREO LEFT only or RIGHT only on both outputs This is useful for dual mono channels in order to select the correct sound track which is stored for every channel Wide dynamic range 16 bit resolution 26 REMOTE CONTROL Operating Distance 7 m Max Batteries 2x1 5V Micro R 03 AAA TUNERS amp LNB 1 XRF In IEC type female 75Ohm 1 x RF Out loop through IEC type male 75Ohm 1 x F type LNB connector LNB POWER SUPPLY e Vertical 13 14 Volt e Horizontal 17 18 Volt e Max Output Current 400mA Short circuit protected e 22 kHz Tone Frequency 22KHz 2 KHz Amplitude 0 6 Vpp 0 2 Vpp USB POWER SUPPLY 5V 500mA max FRONT PANEL Display SEVEN SEGMENT display Remote Control Keys On Off Program Program Output 2 Vrms 0 dBfs Z 10 kohm DIGITAL AUDIO Output Optical SPDIF A V amp DATA IN OUT Scart TV scart RGB Video Output TV scart Analog Audio Output TV scart Digital Audio Output Optical output 201816141210 8 6 4 2
7. Encrypted Mi paitan fetrrwnce transponder 10735 10000 Signal quality Saal level E Transponder Int DE Satellite List EA to continue DiSEqC If you have multiple satellite dishes and a DiSEqC switch select this antenna type After selecting DiSEqC switch another menu screen will be displayed You can set four DiSEqC options if available Press OK to scan all satellites First Time Installation Migi Disig hee aiig i Nine Tse wee Scan Encrypted is inference transponder TOTIS tOO Saal qualily Sagal irt Transpendar Sst fe Satellite Lint FE ta contin Motor If you have a motor driven dish select this antenna type Configure settings as desired for positioning the motor Instructions are present on this menu screen Options may vary according to First Time Installation continued the motor type When finished press OK to scan for services First Time installation Satelite Mente BS be to angle 0000 kmag ha the itadie i fni Deia molar R i a a Molat speed i Set EastWestL Sab Fanti Velereoce braasponder 10758430000 Signal qiaty Signal levet 5 hiii int E Sateilite List 5 to continue m e After setting antenna settings press OK to continue Satellite Automa tic Sean Scamming trampander Taksat 42 06 109608 Pease wok This will take a few minutes eb SP The box starts to scan services The process of scanning will take a few min
8. new program is found it will be added to the programme list Found program s name is shown as Program Terresterial Mode In Terrestrial manual scan mode you have two options Channel scan and Frequency scan Terrestrial Manual Scan Channel Scan Please select one scan type to search channels as maually Channel Scan e This feature can be used for direct broadcast entry e Select Channel Scan by using a or w button and press OK button e ln manual channel scan the number of the multiplex is entered manually and only that multiplex is searched for the channels e For each valid channel number signal level and signal quality are shown on the screen e In both manual and auto search any existing channel in the database is not re stored to avoid duplicates of that channel 20 Frequency Scan J So Frequency Scan Frequency Signal quality Mone Sigral level CEB vatu entry EX Search mm e This feature can be used for direct broadcast entry e Select Frequency Scan by using a or Y button and press OK button e In frequency scan the frequency of the provider channel system is entered manually and only that provider channels is searched e For valid frequency signal level and signal quality are shown on the screen First Time Installation e This section is the same as the initial installation part Please refer to First time installation section for more inform
9. settings are the first priority when multiple choices are available on a broadcast Secondary settings are the alternatives when the first options are not available Menu shows the language of the system Guide Sets guide language Installation The Installation menu is mainly intended to help you store channels Select Installation from the Setup menu by pressing V or a buttons This menu includes the following items Installation Satellite Automatic Scan Dig Wig bite 3 Kig Sean Encrypt elmes tamale 11551710000 Salge m Sipdlent 3 jepe it E Sean selected satelite E Scan for sericea k Y X With this menu you can search selected or all satellites To do this select Automatic channel scan in the Installation menu by using the w a buttons If you press OK button the Automatic channel scan menu will appear Settings in this screen may vary in accordance with antenna type selection defined in first time installation You can set satellite values as desired Press GREEN button to scan selected satellite Press BLUE button to view transponder list You can use OK button to scan all satellites Terresterial Automatic Scan e Select Terrestrial Automatic Scan by using w a buttons button and press OK button e Then a confirmation message will be displayed on the screen Select Yes to continue or select No to cancel If Yes is selected the automatic sear
10. the front panel will be red Standby mode Inserting Batteries in the Remote Control e Remove the battery cover located on the back of the remote control by gently pulling backwards from the indicated part e Insert two AAA R3 2 X 1 5Volt or equivalent type batteries inside Place the batteries in the correct direction observing the polarity symbols and replace the battery cover e While using the remote control you should direct it towards the front panel of the receiver Remote range is approximately 7m 23ft e If your receiver no longer responds to the remote control it is probable that the batteries are exhausted If so you can still use the local buttons of the receiver You can replace batteries after they are exhausted ENOTE Remove the batteries from the remote control when it is not to be used for a long period Otherwise it can be damaged due to the batteries leaking fig 1 Connecting the Set Top Box to a TV Set You can connect the set top box to your TV by using the scart socket or HDMI input Use a scart or HDMI cable to connect the set top box to your TV The set top box gives RGB or CVBS output from scart or high definition quality from HDMI output 9 089 cL ag a i SCART connection HDMI connection fig 2 Power Connection imPORTANT The set top box is designed to operate on 220 240V AC 50 Hz Plug the power cable to the ma
11. the screen e Refer to the module instruction manual for details of the settings Note Insert or remove the CI module only when the set top box is in STANDBY mode or disconnected from the mains 23 Favourite Programme FAV Audio Mode Selection Yellow Button The YELLOW key LRS will toggle the sound You can navigate within favourites by pressing mode The mode is stereo as default If you only the FAV button if available A program can be want to listen to the left or only the right speaker selected as a favourite from the program table the sound mode can be changed with this key menu channels will be switched to both left and right When the w button is pressed mute symbol will outputs When the mode is changed an appropriate be displayed on the screen The mute symbol will OSD will be displayed for a while and this will be B stored for this program for switching back to the Aey until E puton SD E an Ue mts symbol will not be displayed on the screen if there requested audio mode next time is another menu displayed on the screen Info Help Subtitle SUBT E 1 EinsExtra Some channels can be broadcast with subtitles 0200 2000 Astra 1 1926 10744 w722000 displayed on screen for the hard of hearing This 20102015 SR S a function selects the desired subtitle language and enables the automatic displaying of subtitles When INFO key is pressed an information menu whenever subtitle information is available Pr
12. Eai All the recordings are kept in a list in the recordings library BLUE button Delete Erases the selected recording P lt P button Edit Makes changes on the selected recording TEXT button Sort Changes the order of the recordings You can select from a wide range of sorting options OK button Displays playing options O Resume Resumes the playback NOTE Viewing main menu and menu items will not be available during the playback INFO Details Displays the short extended programmes in detail Play Options Play from start Plays the recording from the beginning Resume Begins with playing from the last stopped position Play from offset Begins playing from the time which is entered Manage chapters It will display any marked chapters To set chapter marks press the Menu button during playback and enter the Chapter 16 Options menu and begin with playback from the selected chapter Configuring Settings e Detailed settings can be configured to suit your personal preferences e Select Setup amp Configuration from the main menu by using w a buttons and press OK button to display Setup menu Set Configuration Configuration e You can configure the main settings of your set top box using the configuration screen e Select Configuration from Setup menu and press OK to continue e You can press BACK button to exit Configuration Output Settings Select Re
13. R MOISTURE 28
14. Y buttons e Press OK and Time Settings sub menu will be displayed on the screen Current Time Time Zone Setting and Time Zone will be available e Use a or Y buttons to highlight the Time Zone Setting Time Zone Setting is set using lt or P buttons It can be set to AUTO or MANUAL e When AUTO is selected Current Time and Time Zone options will not be available to be set If MANUAL option is selected as the Time Zone Setting Time Zone can be altered e By pressing 4 or Y buttons select Time Zone Use lt or gt buttons to change the Time Zone between GMT 12 or GMT 12 Current Time on the top of the menu list will then change according to the selected Time Zone Audio Description Audio description refers to an additional narration track for blind and visually impaired viewers of visual media including television and movies The description narrator talks through the presentation describing what is happening on the screen during the natural pauses in the audio and sometimes during dialogue if deemed necessary You can use this feature only if the broadcaster supports that additional narration track Use Y or a buttons to select an item Then use lt or gt buttons to set 18 Audio Description Audio Description Audio Description This function enables or disables the audio description feature by pressing the lt or b gt buttons
15. ation Antenna Installation This setting manages the antenna options For more information see the section Satellite Scan in the First Time Installation menu Clear Service List optional Use this setting to clear channels stored Recording configuration Select Recordings item in the Setup menu to configure recording settings The following menu is displayed for recording configuration 2 N The following options are available for adjustments Auto discard Discard When the USB disk is full and a timer is set to record the unit will automatically discard previous recordings based on this setting The options are as follows Recordings Configuration None The unit will not discard any recordings and the Save Settings timer will not record the requested programme You can use this item to load preset channel table or Oldest Starting with the oldest recordings will be last saved settings as a factory settings Highlight Save deleted to make space for the requested timer Settings line and press OK key Then the following Longest Starting with the longest recordings message will be displayed Are you sure to store will be deleted to make space for the requested current program table and settings as default timer You can confirm by OK button or cancel by MENU button You can also cancel by highlightin NO and then Shortest Starting with the shortest recordings will be deleted to make space for the requested timer Unplay
16. ay files stored in a USB drive or record programmes e 2 5 and 3 5 inch hdd with external power supply external hard disk drives are supported e To record a programme you should first connect a USB disk to your box while the it is switched off You should then switch on the box to enable recording feature Otherwise recording feature will not be available IMPORTANT e You should back up your files before making any connections to the box in order to avoid any possible data loss Note that manufacturer will not be responsible for any file damage or dataloss e Itis possible that certain types of USB devices e g MP3 Players or USB hard disk drives memory sticks may not be compatible with this device e The device may not support all disk formats If you connect a USB disk with an unsupported format then you will be asked to format the content See the section Format Disk in the following pages for more information on disk formatting Note that ALL the data stored on the USB disk will be lost and then the disk format will be converted to FAT32 in such a case USB Disk Connection e Plug your USB device to the USB input of the box ENOTE Plug or unplug your USB disk while the box is switched off If you are going to connect a USB hard disk drive to the box the USB connection cable used between the disk drive and the box should have a USB logo and should be as short as possible While formatting a USB ha
17. ceiver Upgrade v04 Kulog set Time Settings Select hudo Description Select HDCP Off Low Power Yes Automatic Power Down Yes Country e You can set country only while in first installation mode Managing Settings Output Settings Configuration Country ireland Output Settings Out setings Wipe Receiver Upgrade Display Format Auto Menu Locking Select SCART mode RGB Time Settings Select Prefer Dolby Digital No Audio Description Select SPDIF Output LPCM HDCP Off Active Antenna Off Low Power Yes HDMI Resolution 576p Automatic Power Down Yes Audio Delay Select KD Select TV Type Ebit TV Type Channels can be broadcast in a widescreen format whose output can be different for normal and widescreen TV sets This function enables you to change the screen format of the TV connected so that broadcasts are displayed correctly Highlight the TV Type line in the Configuration menu and use the lt gt keys to select 4 3 if you have a standard TV set connected or 16 9 if it is a widescreen TV This function duplicates the selection made at the time of first installation and can be used if you change TV sets Display Format Use v or a button to select Display Format and then press lt or gt button to set this setting as Auto Pillar box or zoom Scart mode The receiver can output RGB and CVBS signal from the TV SCART on the rear panel Although the RGB format results in a better quality picture not all equi
18. ch starts After the scanning is completed your set top box will store all the available channels Satellite Manual Scan This screen changes according to the changes made during the first time installation Satellite Manual Scan Satellite Manual Scan E iransperees int FF Scan fae services This menu will be activated by using the w a buttons in the Installation menu By pressing the OK button Menu items in manual search menu will be as the following 1 Satellite 2 DiSEqC 3 Frequency 4 Polarization 5 Symbol rate 6 Network search 7 Scan Encrypted e Satellite Name Polarization values and Network Search requirements are changed by toggling e Frequency and Symbol Rate are entered directly using 0 1 2 9 keys e As soon as you enter the transponder frequency the signal level and quality will be reflected in the signal strength bars Signal Level and Signal Quality bars at the bottom of the menu The Signal Level bar shows the strength of the satellite signal The Signa Quality bar shows lock quality of the device for entered values 19 Installation Options continued e If the Network Search item is selected as YES after tuning to that transponder the parameters of other transponders will be collected from NIT Network Information Table and tuning will be performed for other transponders e By pressing OK button values are stored and after the search if a
19. ear e Replace the batteries with new ones You have forgotten any channel lock code or password When the password is forgotten you can perform First Time Installation to set it back to its default value 0000 Information for Users on Disposal of Old Equipment and Batteries European Union only These symbols indicate that equipment with these symbols should not be disposed of as general household waste If you want to dispose of the product or battery please consider the collection systems or facilities for appropriate recycling NOTE The sign Pb below the symbol for batteries indicates that this battery contains lead Battery 25 GENERAL CHARACTERISTICS Supply Voltage 220 240 V AC 50Hz Input Frequency 174Mhz 862Mhz Frequency Band VHF UHF Maximum Power consumption 30 W Standby Power Consumption 1 W Operating temperature 5 C to 40 C Storage temperature 15 C to 55 C Humidity 25 to 75 rel Physical dimensions 295 x 195 x 40 mm Weight 1500 g Main Processor BCM 7325 Flash Memory 32 MB DDRRAM 256 MB Transmission Standards MPEG2 MPEG4 HD DVB T DVB S S2 MPEG2 DVB S S2 MPEG4 Frequency Band UHF VHF DEMODULATION COFDM with 2K 8K FFT mode FEC for all DVB Modes Automatically found QPSK 16QAM 64QAM with 2k 4k 8k FFT mode Supports DVB S2 Broadcast Services profile QPSK rates 1 2 3 5 2 3 3 4 4 5 5 6 8 9 9 10 8PSK rates 3 5 2 3 3 4 5 6 8 9
20. ected USB disk DVR RECS An ifo file is created for each recording This file includes information such as broadcaster programme and recording time First Time Installation IMPORTANT Ensure that the aerial and or satellite is connected before switching on the set top box for the first time When the box is switched on from the standby mode and if there is no channel stored in the database the First Time Installation Menu will be displayed on the screen In the first menu screen you will be asked to select the language First Time Installation SS Wahlen See bitte bre Sprache aus dailh Welroene please select your language Fle regheaigh de theanga Gilg Syenvenve Veudler chr une langue Franca Rievenide teleccione wn Soma Esja Selerinate la rostra lingua Halai Hing geldiniz bitten oil se imini yapaner Tiig Sendeconme wetumy Presne wyhrar jeni Palak FES Choose Language E ia contine The desired operation language can be set by highlighting the desired language with Y or a keys and pressing OK Afterwards Country Time Zone TV type Display format and HD output resolution selection screen will be displayed First Time installation eee eee can Time Zone GAT 90 TV type s ENS Display Format wate HO output resolution waan AA OO ans EO te chasse you country FE to continue y Select the desired Country Time Zone TV type Display format and HD output resolutio
21. ed If this option is set to EXCLUDED any unplayed recordings will not be deleted If this option is set to INCLUDED unplayed recordings will be deleted Format Drive IMPORTANT Note that ALL the data stored on the USB disk will be lost and then the disk format will be converted to FAT32 if you activate this feature e If you want to delete all files on the connected USB hard disk drive or memory stick you can use Format Disk option e Also if your USB disk malfunctions you can try formatting the USB disk In most cases formatting the USB disk will restore normal operation however ALL the data stored on the USB disk will be lost in such a case e Press OK button while the Format Disk option is highlighted A menu will appear on the screen requiring you to enter a pin number If you have not changed the pin number the factory default is 0000 After you enter the pin a pop up menu appears on the screen to ensure that the hard disk should be formatted select YES and press OK to format the hard disk Select NO and press OK to cancel Ensure you back up important recordings before you format the USB disk unit Max Timeshift You can set the timeshift duration by using this function Load Settings You use this item to load preset channel table or last saved settings which had been loaded to receiver at the factory To reload factory settings highlight this item and press OK button Then the following message wil
22. enu Select Channel List item by using w a button Press OK to view menu contents NOTE You can direclty press OK button to view channel list Channel List Ty 1 EinsExtra amp faveuntes Mye Delete Edit name EU Fanction Fy watch Fd Fitter Operating the Channel List e Press w a button to select the channel that will be processed e Press gt button to select a function on Channel List menu e Use Red Green buttons to move page up or down e Press P lt P button to view filtering options e Press YELLOW button to tag untag a channel e Press BLUE button to tag untag all e Press EXIT button to exit e Use INFO button to view more information Selecting a Specific Channel e Select option should be highlighted by using lt gt button e To watch a specific channel you should highlight the desired channel using w 7 a button and press OK button Selected channel will be displayed Channel List 101 BBC 1 London 10775 H 22000 T 102 BBC 2 England 103 ITV1 London 104 Channel 4 105 Five 106 BBC THREE 107 BBC FOUR 108 BBC HD 110 BBC ALBA 113 ITV2 Lock Favourites E73 Function Watch fiter e Ifthe selected channel is password protected a parental lock password will be required If the correct code is entered the selected channel can be watched Deleting Channels e Select the channel that you want to delete and select Delete opt
23. ess OSD will be displayed the subtitle buton to activate the subtitle menu Info bar gives information related to the program Previous Channel currently being watched This info includes You can display the last watched channel by using program number program name program mode button TV or Radio transponder name transponder Teletext TEXT frequency favourites icon if the program is one of the favourite programs scrambled unscrambled You can use teletext with your receiver s remote channel polarisation audio mode whether the control By pressing TEXT button you can activate program has teletext or not and short event the Teletext broadcasting You can use RED description broadcast resolution i e 576i 576p GREEN YELLOW and BLUE buttons in TEXT 720p or 1080i menu Press EXIT to exit from Teletext Audio Language button AUDIO OPT button MODE CHANGES The AUDIO button allows selecting another sound There are two modes available in your device track of the present program When the language You can switch between Satellite and Terrestrial button is pressed a menu will be displayed showing mode while watching a channel by using the Opt the number of possible audio languages for TV button and tracks for radio programs available You can navigate using V or a buttons and select with OK button If an audio language supports Dolby digital output AC3 expression is seen at the end of the audio language
24. etc e VHFIII 174 230 MHz 7MHz bandwith UHFIV and UHFV 470 862 MHz 8MHz bandwith e Supports 16 QAM 64 QAM DVB T modulations e Signal strength and signal quality bars for antenna adjustment e Various channel search options e Automatic Satellite search for preset transponders e Transponder search e Network search e FTA Free to Air search option for satellite and auto search modes e Auto FEC Forward Error Correction search e Auto PID correction except user defined PIDs e Digital Decoding Properties e Demodulation QPSK and 8PSK e FEC Auto 1 2 2 3 3 4 5 6 7 8 for DVB S QPSK e Auto 1 4 1 3 2 5 1 2 3 5 2 3 3 4 4 5 5 6 8 9 9 10 for DVB S2 QPSK e Auto 3 5 2 3 3 4 5 6 8 9 9 10 for DVB S2 8PSK e Symbol Rate 2 to 45 Msps for DVB S e Symbol Rate 5 to 30 Msps for DVB S2 e Video Decoding MEPG2 MP ML PAL NTSC 4 3 16 9 MPEG4 AVC H 264 HP L4 16 9 e Video Out PAL e Audio Decoding MPEG 1 LAYER NII MPEG 2 LAYER II MPEG 2 AAC MPEG 4 AAC e 32 bit OSD color 720x576 pixels for PAL e Last watched channel saving e LNB short circuit and overload protection by software e IR remote control Viewing remote control 1 Standby 2 Favourite mode 3 No function 4 Numeric buttons 5 Media Browser 6 Previous programme 7 Volume Up Down 8 Electronic Programme Guide 9 Exit Menu 10 Info 11 OK Confirm 12 Play 13 Programme recording 14 Pause Timeshift record
25. hannel by using w a button Press OK button to add selected channel to the favourites list e Star icon indicates that the selected channel is added to the favourites list e You can press OK button again to remove the selected channel from the list Button Functions e OK Adds removes a station e P lt P Displays filtering options e YELLOW Tags untags a channel e BLUE Tags untags all Search channel Viewing Electronic Programme Guide EPG You can view the electronic programme guide EPG to view information about available programmes The box gets information of the channel programs weekly by means of 7 DAY EPG Please press the GUIDE button to view the EPG menu e Press w a buttons to navigate through channels e Press lt gt buttons to navigate through the programme list e EPG menu displays available information on all channels e Please note that event information is updated automatically If there are no event information data available for channels EPG will be displayed with blanks Channel list continued Electronic Programme Guide Eins xtra Aktuell CECEN hgefUnkncan Undefined Nachrichten im Viertelstundentatt Wed 29 Feb 0800 1900 Wed 25 Feb 1400 1300 i00 BNQUCC HD Prev day hedy 200m EE Search channel EI watch FEF Details Now FE Choose genre Eo Page left E3 Page right Record Fiza Search program PR button Prev Day Displays the programmes
26. hannels e Select the channel that you want to lock and select Lock option using lt gt button Press OK button to continue e You will be asked to enter parental control PIN code Default PIN is set as 0000 Enter the PIN number e Press OK button when the desired channel is highlighted to lock unlock the channel Lock symbol will be displayed next to the selected channel You can repeat the same operation to cancel the lock NOTE Default PIN code is 0000 and it can be changed using the Configuration Menu Locking Multiple Channels e Select Lock item and highlight the channel you want to lock Press YELLOW key The channel will be marked e Move to the next channel you want to lock and press YELLOW key e Mark the other channels you want to lock like the same way and press OK e Enter the pin code in the menu displayed and press OK e The selected channels will be locked e To mark all the channels in the channel list at once you can use BLUE key Setting Favourites e Select Favourites by using lt gt button and press OK button e You can set various channels as favourites so that only the favourite channels are navigated 14 Favourites 1 EinsEntra 2 Einstestival 3 EinsPlas fy atte 5 PHOENIX 6 Test R m 7 ANDE HD FS 8 NIOUCCHO E 9 N24 HD 10 CHD 11 SERS HO A channel puer L TagUntag channel 0 Tag intag Al e Select a list by pressing lt gt buttons Afterwards select a c
27. he following OSD will be displayed Stop recording on EinsExtra Select Yes by using lt or gt OK buttons to cancel instant recording NOTE Changing channel is not possible while recording 12 Time Shifting Pause Live Recording m rt Timeshifting e Pause Live Recording is a feature that enables you to pause a live broadcast The live broadcasting can be stopped any time Press PAUSE mm button to timeshiftthe broadcasting In the INFO banner the timeshift will commence e The duration of Timeshift can be adjusted from Recordings in the Configuration menu e In order to resume the programme press PLAY PAUSE or OK button The paused recording can be watched in different speeds by means of Gor Menu System Channel List or keys To terminate the timeshifting press STOP button Menu System Viewing the Main Menu e Press the MENU button to view main menu e You can move between menus by using the navigation lt 4 gt V 4 buttons on the remote control e You can enter select or confirm a menu option by using OK button e n some sub menus you can use BACK button to return to a previous menu screen e To exit from a menu screen you can press MENU button e The following items are located in the main menu screen Channel List Managing Stations Channel List e The set top box keeps all stored stations in the Channel List e Press MENU button to view main m
28. how Stop mg button Stop the playing file Loop Shuffle Green button Press GREEN button consecutively to activate Loop Shuffle Loop Plays the selected file repeatedly Media Browser continued amp Conditional Access Shuffle Plays the files randomly If shuffle mode is enabled previous next function will also jump to the tracks randomly Previous Next lt gt buttons Jump to previous or next file of slideshow Rotate v a buttons Rotate the picture using up down buttons MENU Back to file list Info Activates the operations bar Playing Video Files Select USB device option from the main media browser screen Select VIDEOS option using the Up or Down buttons press OK button and all available VIDEO files will be displayed Sort by Name A Z Jumps to file OK Play this Play gt button Play files LANG Sorts files by name BLUE Changes media type The following screen will be displayed during the playback POWAY i TS 2 TITOS tap ac Y Fiat inad ut formaed adi fhoda faa Fesban fa Sii r Ga Sbt Of ite Play a button Play files Pause Il button Pauses the playback Stop W button Stop the playing file Rewind lt lt button Goes backward Fast Forward gt button Goes forward GREEN Jumps to the selected time LANG Sets subtitle or audio YELLOW Sets subtitle time correction RED Sets subtitle position on the screen BLUE Sets subt
29. ing 15 Rapid reverse 16 Teletext 17 Subtitle 18 RED button 19 GREEN button 20 Mute 21 Switch between TV or Radio broadcasts 22 Recordings Library 23 Channel Up Down 24 Menu on off 25 Back 26 Navigation buttons 2 Stop 28 Fast Forward 29 Switches between Satellite and Terrestrial mode 30 Audio language selection 31 BLUE button 32 YELLOW button 20 Connections on the Set Top Box Rear Panel Ma OOFRO oLI GOF Q cl ANTENNA IN ANTENNA OUT C LNB IN HDMI OUTPUT ETHERNET SCART TV OPTICAL anatoc C 5V 50mA 13 48V Max 400 mA AUDIO OUT AUDIO OUT Common Interface CI Slot ANTENNA IN Aerial input ANTENNA OUT To watch analogue channels on the TV LNB IN To connect satellite signal to the box HDMI IN HDMI connection LAN Ethernet Input for service use only SCART OUT If your TV has a scart connector you can connect the box to your TV using a scart cable 8 OPTICAL AUDIO OUT You can use this connector to output the digital audio to an external device See your audio system instruction book for further information 9 AUDIO OUT Audio Output 10 POWER CABLE NOohWD Make sure that you connect all cables and connections before you plug the unit into the mains supply After you connect the unit to the mains supply the LED light located on
30. ing Settings Set Pin Menu Lock Time Settings Optional Audio Description HDCP Low Power Automatic Power Down Configuring Language Preferences Installation Satellite Automatic Scan Terresterial Automatic Scan Satellite Manual Scan Satellite Manual Scan Terresterial Mode Channel Scan Frequency Scan First Time Installation Clear Service List optional Recording configuration Installation Options continued Load Settings Save Settings Recordings Configuration Advanced Features Viewing the Media Browser Playing MP3 Files Viewing JPG Files Slideshow Options Playing Video Files Conditional Access Other Information Audio Mode Selection Yellow Button Info Help Audio Language button AUDIO EPG Electronic Programme Guide Favourite Programme FAV Mute Subtitle SUBT Previous Channel Teletext TEXT OPT button MODE CHANGES Product Support Troubleshooting Important Instruction 16 16 17 17 17 17 18 18 18 18 18 18 18 18 19 19 19 19 19 20 20 20 20 20 20 20 21 21 21 22 22 22 22 22 23 23 24 24 24 24 24 24 24 24 24 24 24 25 25 28 1 IMPORTANT Please read these instructions fully before installing or operating Preparation For ventilation leave a free space of at least 10 cm all around the set To prevent any fault and unsafe situations please do not place any objects on top of the set Use this device in moderate climates I
31. ins socket outlet e After unpacking allow the set top box to reach the ambient room temperature before you connect the device to the mains Antenna amp Satellite Connection e Use ANTENNA LIN to connect to an antenna to your receiver fig 1 You can also use ANTENNA OUT to connect antenna to your TV through the set top box with an appropriate antenna cable e Connect the satellite LNB cable to the LNB socket of your receiver fig 2 Power On Off Connect all cables before plugging the box into the mains After plugging in the mains cord of the set top box to the mains supply a light will be seen on the front panel Standby mode When the set top box is first powered up please wait until the box is initialized before activating the receiver since booting of software will take some time Plug in to the mains Please wait until the unit is initialized This may take almost a minute This product conforms with the latest European Union Power Consumption Regulations and features a low power standby mode The product enters into the low power standby mode a few seconds later after pressing the standby button to turn off the unit Until the low power mode is activated a clock will be displayed at the display When the low power mode is activated the display will be shut down When you press the standby button during low power mode it may take a minute until the product is initialized However if you press standby button bef
32. ion using lt gt button Press OK button to continue e A message will be displayed to confirm your decision Select YES to delete the selected channel select NO to cancel Press OK button to continue e Selected channel will be deleted if you select YES The operation will be cancelled if you select NO Deleting Multiple Channels e Select Delete and highlight the channel you want to delete e Press YELLOW key The channel will be marked Move to the next channel you want to delete Press YELLOW key e Mark the other channels you want to delete in the same way and press OK e You will see a confirmation menu Select YES in the menu The selected channels will be deleted 13 Channel list continued e To mark all the channels in the channel list at once you can use BLUE key Renaming Channels e Select the channel that you want to rename and select Edit Name option using lt gt button Press OK button to continue e Pressing lt gt button moves to the previous next character Pressing w a button toggles the current character i e b character becomes a by pressing v and c by pressing a e Pressing the numeric buttons 0 9 replaces the highlighted character with the characters printed above the button one by one as the button is pressed e Press MENU to cancel editing e When finished press OK button to save the new name Adding Locks to C
33. itle size SUBTITLE Enables disables subtitles EXIT Exit video MENU Go to the previous menu Supported video types avi mpg mkv mp4 Conditional Access Press the MENU slam to display the main menu and use the v A button to highlight the Conditional pees ie and press the OK button i Menu Conditional Access i m Some channels operate on a Pay Per View basis These channels require a subscription and a external device Obtain the Conditional Access Module CAM and the viewing card by subscribing to a pay channel company then insert those to the set top box using the following procedure e Switch off the set top box and unplug from the mains e The CAM should be correctly inserted it is impossible to insert fully if reversed IMPORTANT The CAM or the set top box terminal may be damaged if the CAM is forcefully inserted e Connect the set top box to the mains supply switch on and then wait for a few moments until the card is activated e Some CAMs may require the following set up Please set the CAM by entering the main menu Conditional Access then pressing the OK button CAM set up menu is not displayed when it is not required e To see the viewing contract information press the MENU button then highlight Conditional Access and press the OK button e When no module is inserted No Conditional Access module detected message appears on
34. k The following symbols are used in the Instruction Book as a marker for restrictions and precautions and safety instructions Note such information for security reasons A WARNING If you do not pay attention to such a marked warning it can cause serious injury or death Make sure you read these instructions in order to ensure a safe operation A CAUTION Such a precaution is marked you should take up or note to avoid injury or property damage Make sure you read these instructions in order to ensure a safe operation Safety Precautions continued Features O IMPORTANT Warnings on the appliance and restrictions are displayed like this Make sure you read these instructions in order to operate the system correctly and avoid damage P NOTE Information about the operation and additional explanations are marked like this To be aware of such information is recommended to ensure that the functions can be used optimally Batteries A Warning Incorrect installation of batteries may cause battery leakage and corrosion resulting in damage to the remote control Do not mix old and new batteries or batteries of different types Do not dispose of batteries in a fire Do not dispose of batteries with normal household waste take to a local recycling centre A CAUTION Insert the batteries rechargeable batteries in the correct polarity Don t try to recharge non rechargeable batteries and under no circumstances thr
35. l be displayed Are you sure to load default program tabel and settings You can confirm by pressing OK button or cancel by using MENU button You can also cancel by highlightin NO and then pressing OK button pressing OK button 21 Viewing the Media Browser e To display Media Browser window press either MENU button on the remote control and then select Media Browser by pressing v or a button Press OK button to continue Media Browser menu contents depending on the contents of your USB drive will be displayed e Also when you plug a USB device the following screen will be displayed _ USB device connected To view Media Browser menu please press MENU button on the remote control and select Media browser item by pressing V or a button Then press OK button Media Browser screen will be displayed Media Browser USB Device Please select USB Device to explore the connected USB device To view your recordings please select recording library You can play music watch video and view picture files from a USB memory stick Note Some USB compliant devices may not be supported Note If the USB stick is not recognized after power off on or First Time Installation first plug the USB device out and power off on the STB set Plug the USB device in again Playing MP3 Files Select MUSIC option from the main media browser window and all available music file
36. n by using lt gt buttons and press OK to continue After pressing the OK button search type will be displayed Please select your search type by using V or a buttons and press OK to continue Which one would you prefer Satellite Scan Terrestrial Scan Satellite Scan This option scans the selected satellite channels Terrestrial Scan This option scans the available terrestrial channels 10 Satellite Scan There are four types of antenna selection You can select Antenna type as Direct Unicable DiSEqC or Motor by using lt gt buttons Direct If you have a single receiver and a direct satellite dish select this antenna type After selecting Direct another menu screen will be displayed Select an available satallite and press OK to scan for services Finst Time instalation st Som Enple i Jia Reference transponder 07SS M S0000 Sigal quality iuga Level y E Transponder al E ite tet Eio continue Unicable If you have multiple receivers and a unicable system select this antenna type Press OK to continue Configure settings by following the instructions on the screen Press OK to scan for services First Time Installation Satellite rd l UB Check thee tiche an LiUB 1a iher busd j find aul preper unter band and Lind a bend frequency Examine toe A cable coenertion on LHE te Saleibe Pasion yu Siallite Pesibign as find cul coanected patellite Scan
37. name If the program does not have multi audio a pop up message will be displayed EPG Electronic Programme Guide Press the EPG button to display the electronic program guide EPG where you can view the event information start and end time for current and next events program number program name event name of the programs in tuned transponder and set timers for the events For more information see the section Electronic Programme Guide 24 Problem Possible Reasons Troubleshooting What To Do The LED indicator does not glow Mains cable is not connected Check if the mains cable is plugged into the power socket No picture or sound No signal or weak signal Check the aerial and video connections scart HDMI The settings you have done in the menus have not been changed The digital set top box was unplugged without first going to standby Before unplugging your digital set top box make sure it is in standby You see the on screen error message related with LNB short circuit protection mode The dish installation is not correct or cable connections have been made incorrect Check the connection If the problem persist Contact the closest service company for help The remote control is not working e The set top box is in standby e Remote control is out of range e Batteries are exhausted e Press the STANDBY button e Check that the remote control range is cl
38. nd press the OK button e Highlight Configuration menu with w a keys and pres OK e Use w a buttons to choose Receiver Upgrade and press OK button e Highlight Edit upgrade menu with w a keys and press OK to change upgrade options Please enter your available satellite information and save all values all select reset and press OK to re enter e Highlight Scan for upgrade menu with va keys and press OK to commence upgrade Menu Locking e This setting configures menu locking e Select Menu Locking option by using w a buttons e Press OK button to enter the menu e To display parental lock menu options PIN number should be entered Factory default PIN number is 17 Managing Settings continued 0000 After coding the correct PIN number parental settings menu will be displayed Menu Locking Set PIN Menu Lock Disabled Set Pin e Press OK to display the Set PIN window Use numeric buttons to enter the new pin number You will need to input your new pin a second time for verification purposes e The factory default pin number is 0000 If you change the pin number make sure you write it down and keep it safe Menu Lock e Menu lock setting enables or disables the menu access You can disable access to the installation menu or the whole menu system Time Settings Optional e In the configuration menu highlight the Time Settings item by pressing 4 or
39. ntroduction e Thank you for choosing this product This manual will guide you for the proper operation of your set top box e Before operating the set top box please read this manual thoroughly Please keep this manual in a safe place for future references Read the corresponding instructions of this handbook prior to the first use of the device even when the usage of electronic devices is familiar to you e Please keep this instruction book for future reference Safety Precautions Power Source The set should be operated only from a 220 240V AC 50 Hz outlet Ensure that you select the correct voltage setting for your convenience WARNING When the setis not in use for a long time disconnect from the power Power Cord e Do not place the unit a piece of furniture etc on the power cord mains lead or pinch the cord e Handle the power cord by the plug Do not pull out the plug by tugging the cord and never touch the power cord when your hands are wet as this could cause a short circuit or electric shock e Never make a knot in the cord or tie it with other cords The power cords should be routed in such a way that they are not likely to be stepped on A damaged power cord can cause fire or give you an electrical shock e Check the power cord once in a while When you find it damaged ask closest service agent for help When the AC power cord needs to be changed it should be done at a qualified service shop onl
40. ore low power mode is activated unit will be initialized in a couple of seconds Active standby mode Although it is not recommended for enviromental reasons you may disable low power mode in your product at setup configuration menu oOo mt gt O ANTENNA IN fig 1 r 5 J Soa se EE N emna Auto Power Down The box will automatically power down after four hours by factory default After the timeout value is reached and the Tv is not operated the TV will go off if Auto Power Down option is enabled The Automatic power down can be set as On or Off from the configuration menu O Important Note f there is any ongoing programme recording or if any EPG programme recordings and or manual recordings is set to a nearby time the unit does not switch to low power mode and remains in active standby mode until recording tasks have been finished At low power mode the unit initializes a couple of minutes before the actual time of the incoming recording task O Important Note The unit initializes time to time to receive updates from EPG broadcast in order to sycnronize EPG recording tasks properly After getting updates the unit switches to low power mode automatically This takes a short while and it is not a malfunction Important USB Connection Precautions e You can connect a USB hard disk drive or USB memory stick to your box by using the USB input This feature allows you to pl
41. ote control Then Add Timer window appears Ada timer Wed 25 0 15 27 Times record Type lt POUND Sut En ind 1632 Duration 6 ins Repeat One Playback Use paremal settings Gisan save Channel gt keys will navigate the user through the TV or Radio list Record Type Displays recording type Date Starting date is entered via the Left Right or the numeric buttons Start Starting time is entered via the Left Right or the numeric buttons End Ending time is entered via the Left Right or the numeric buttons Duration Duration between Start and End time Repeat Sets the repeating preference Playback Sets playback control Change Delete permits or prohibits any modifications for other users 15 Timers Recordings Library You can save the adjustments by pressing the GREEN key or cancel the process by pressing the RED button You can edit the timers list via OK key and delete with the BLUE button Recordings Library To view the list of recordings press the MENU button to display the main menu and use the v or 4 button to highlight the Recordings Library line and press the OK button Recordings Library will then be displayed with the available recordings Recordings Library ooo Wek 29021528 Hane Start Length IINE YN Imin nen om das Mavs der Token 2900 12 15 16 ik bet 714 MB Reserved 1204 MB Free O MB fi Delete irc FF Sort A Pay Options Paien
42. ow them into fire Danger of explosion Do not use unequal batteries old and new Alkaline and carbon etc simultaneously If you will not use the device for a long time remove the batteries and store the device in a dry and dust free place Improper use of batteries may cause an explosion or leakage If the batteries have leaked use gloves and clean the appliance thoroughly with a dry cloth Batteries should not be exposed to heat such as sunshine fire or the like Accessories included Remote Control Batteries 2 x AAA Instruction Book Quick Start Guide NOTE You should check the accessories after purchasing Make sure that each accessory is 4 Safety Precautions continued Features O IMPORTANT Warnings on the appliance and restrictions are displayed like this Read this information strictly in order to operate the system correctly and avoid damage P NOTE Information about the operation and additional explanations are marked like this To be aware of such information is recommended to ensure that the functions can be used optimally Batteries A Warning Incorrect installation of batteries may cause battery leakage and corrosion resulting in damage to the remote control Do not mix old and new batteries or batteries of different types Do not dispose of batteries in a fire Do not dispose of batteries with normal household waste take to a local recycling centre A CAUTION Insert the batteries
43. pment can cope with an RGB signal Prefer Dolby Digital Use v or a button to select Dolby Digital and then press lt or gt button to set this setting as Yes or No Spdif Output Use wv or a button to select Spdif Output and then press lt or gt button to set this setting as LPCM or Dolby D Active Antenna This feature enables or disables the use of active antennas When antenna power option is set as On 5V will be transmitted to the antenna output IMPORTANT Antenna power should be Off when standard antenna is used instead of the active antenna HDMI Resolution By pressing lt gt on the remote control you can change to HDMI resolution as 576P 720P or 1080i AUDIO Delay First press OK and than by pressing lt gt buttons on the remote control you can set the Audio Delay to the desired value You can use this setting when there is a synchronization problem in the received broadcast Press lt or gt button to change the delay Note This function will be available while using Optical Audio out only Receiver Upgrade Configuration Cutpot Setta kecara Upgrade Menu Lacking Time Settings hud Desipin ET Select Auto Scan Option Fil Eni To ensure that your STB always has the most up to date information Please ensure that after use it is set to its standby mode e Press Menu button and using the v a buttons to choose Setup a
44. rd disk that has 1TB Tera Byte or more file capacity you can experience problems with the formatting process In such a case you should format the disk with your personal computer and the formatted disk type is recommended as FAT32 A CAUTION Quickly plugging and unplugging USB devices is a very hazardous operation Especially do not repeatedly quickly plug and unplug the drive This may cause physical damage to the USB player and especially the USB device itself Do not pull out USB module while playing or recording a file Programme Recording O IMPORTANT When using a new USB hard disk drive it is recommended that you first format the 7 1 disk using your device s Format Disk option e For using the recording function you should connect a USB disk or an external hard disk drive to the box and connected USB disk should have at least 1 GB capacity and should have 2 0 speed compatibility If the connected USB device does not support 2 0 speed an error message will be displayed It is recommended to use external hard disk drives for programme recording and timeshifting features e An hour of the recordings stored occupies approximately 2 GB of space e For more information on recording programmes see the sections Instant Recording Electronic Programme Guide Recordings Library or Timers in the following parts e Recorded programmes are stored in the following directory of the conn
45. s will be displayed AL E wth umber 60 24 Teemu aii A tt tate ee et giia FER Vi twee teary The Larp tong mp ae ob A T ssa FT Liles ibe emery rimpi mer ee ee Pa m a a 1i iiid iye Paai jan Ceai Got fragi mgd Ee lait This o pe Lisie uis a oat wile Previows Mest Jump Numeric buttons jump to selected file using the numeric buttons Play This OK button Plays the selected file 22 Play p button Plays all media files in the folder starting with the selected one Stop mg button Stop the playing file Pause gy button Pause playing file Sort Audio button Sorts files Previous Next 4 gt buttons Jumps to previous or next file to play Viewing JPG Files Photos m L New fate Tiene a G peed 110 Pw Ca mor iyisi PE S a cot 1s Ga me inna Ea Sideshow E Sart by Gate Jump 0 9 buttons jump to selected file using the numeric buttons OK OK button views the selected picture in full screen Slideshow p button starts the slideshow with all pictures in the folder Sort Audio button Sorts files to date v a Navigate Change Media Blue Button Switch between Videos Photos and Music Change Slide Interval Yellow Button Set Slideshoe interval time Slideshow Options 261608 252945174722133 1000001995 WT Pause Ciso boopShutfie A Previewer Rotate on Back te file fist FE Help Pause iI button Pause the slides
46. st turning on your TV set the sound level is not too high Mute e You can press X to mute the sound of your set top box The sound will be muted once this button is pressed e To cancel mute you can press x button again or use the V buttons 11 General Operation Instant Recording Time Shifting On Screen Information e You can press the INFO button to display on screen information Details of the station and current programme will be displayed on the information screen e Particularly current event name next event name and starting and ending time duration bar programme mode channel number and name will be displayed on the information screen if available 1 EinsExtra Ee 11 29 Now EinsExtra Aktuell 08 00 13 00 Next Tagesschau 19 00 19 15 Astra 1 19 26 10744 22000 Signal level Signal quality Instant Recording IMPORTANT To record a programme you should first connect a USB disk to your box while the box is switched off You should then switch on the box to enable the recording feature Otherwise the recording feature will not be available e Press RECORD button to start recording an event instantly while watching a programme The following OSD appears on the screen Instant recording Papa wail e Record OSD will then be displayed for a short time and the current event will be recorded e Press m STOP button to cancel instant recording T
47. utes You can follow the scanning process from the scroll bar After the scanning first time installation will be completed for the satellite search Scan results will be displayed on the screen for the satellite channels Terrestrial Scan The box will start to scan terrestrial channels if search type is selected as Terrestrial scan Lu Wa Terrestrial Automate Scan Smig UF chase 3 Pane wall Ths well tae a few minutes After the scanning first time installation will be completed for the terrestrial search Scan results will be displayed on the screen for the terrestrial channels Scan results view ont Changing Channels e You can change channels with the following methods e You can press the numeric buttons 0 9 to directly enter the channel number You can press numeric buttons consecutively to enter two or more digits e Press the P P buttons to move up or down to the next available channel NOTE You can press OK button to display the channel list Volume Up Down e You can increase or decrease the volume by using V V buttons e The volume level selected will remain set even when the receiver is turned off and on again until you change volume again e The audio volume adjustment for the receiver is independent of the volume control on your TV set O IMPORTANT You should be careful that both volume controls are kept within reasonable levels so that when switching on or when fir
48. y e Please do not place the set in a place subject to direct sun light excessive dust or mechanical shock or in a location near heat sources e The device should be placed on a solid and safe base e Do not place the apparatus on a soft surface such as a rug that might block the ventilation holes on the bottom 2 e A location should not be selected such as a room with high humidity as the condensation arising in the kitchen for example may cause malfunction or damage the device e Heating or other thermal radiation under the set also may cause malfunction or damage the device e The hot air which arises during the operation should be ventilated with sufficient air circulation Please do not put the device into closed areas and do not cover it e Please avoid contact of the device with water or humidity Do not put into operation near bath swimming pools e Take care to provide good air circulation Place the device in a location with adequate ventilation to prevent heat build up in the device e Should any solid object or liquid fall into the cabinet unplug the device and have it checked by qualified personnel before operating it any further e The device should not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the device CAUTION e Batteries must not be exposed to excessive heat such as sunshine fire or the like Symbols in this Instruction Boo
Download Pdf Manuals
Related Search