NanoPC User`s Manual
Contents
1. appears at the bottom of the screen you can press lt Del gt or lt F2 gt key to enter Setup Pa We do not suggest that you change the default values in the BIOS Setup and we shall not be responsible for any damage which resulted from the change you made Use the arrow right left keys to select a specific function and go to the submenu Each function is ex plained below Main It displays the basic system configuration such as CPU Name memory size system date time and so on They all can be viewed or set up through this menu Advanced The advanced system features can be set up through this menu Boot Boot features can be set up through this menu You can set the boot device priority and enable Quiet Boot feature here Security The Administrator User password can be set up through this menu to prevent unauthorized use of your computer If you set a password the system will ask you to key in correct password before boot or access to Setup Save amp Exit The optimal performance settings can be loaded through this menu However it may offer better performance in some ways such as less l O cards less memory etc still it may cause problem if you have more memory or I O cards installed It means if your system loading is heavy set to optimal default may sometimes come out an unstable system What you need now is to adjust BIOS setting one by one trial and error to find out the best setting for your current system Y2. or lt ESC gt to return to the main menu gt Restore Defaults Optimal defaults are the best settings of this motherboard Always load the Optimal defaults after updating the BIOS or after clearing the CMOS values Select this option and press Enter it will pop out a dialogue box to let you load the defaults Select lt Yes gt and then press lt Enter gt to load the defaults Select lt No gt and press lt Enter gt it will not load By this default BIOS have set the optimal performance parameters of system to improve the performances of system components But if the optimal performance parameters to be set cannot be supported by your hardware devices for example too many expansion cards were installed the system might fail to work gt Save as User Defaults If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to save the changes done so far as user defaults select No or lt ESC gt to return to the main menu gt Restore User Defaults If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to restore load the user defaults to all the setup options select No or lt ESC gt to return to the main menu gt Boot Override BIOS auto detect the presence of connected devices select the device you want to boot from and press lt Enter gt then the system will directly boot from the selected devices N STALL OS AAA
3. Defaults 2 Save la 2 EXIT Version 2 15 1231 Copyright C 2012 American Megatrends Inc gt Save Changes and Exit If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to save your changes and exit select No or lt ESC gt to return to the main menu gt Discard Changes and Exit If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to exit setup utility without saving your modifications select No or lt ESC gt to return to the main menu gt Save Changes and Reset If you select this option and press lt Enter gt a message will be displayed in the screen Select Yes to save your changes and reset computer select No or lt ESC gt to return to the main menu gt Discard Changes and Reset If you select this option and press lt Enter gt a message will be displayed in the screen MAN Select Yes to exit setup utility and reset computer without saving your modifications select No or lt ESC gt to return to the main menu gt Save Changes If you select this option and press lt Enter gt a message will be displayed in the center of the screen Select Yes to save your changes select No or lt ESC gt to return to the main menu gt Discard Changes If you select this option and press lt Enter gt a message will be displayed in the center of the screen Select Yes to discard your modifications select No
4. F IB a CLL LIL LLALL LILI L II LIL LIDL ILIAS AAA AAA AAA ISSAI SALLISI N STALL OS What kinds of hardware and software you need here 1 Windows 7 8 Install USB Disk USB DVD ROM drive and Windows 7 8 Install CD Other purchase 2 NanoPC USB Flash Disk In this package Upgrade Upgrade to a newer version of Windows and keep your files settings and programs pgrade is only available when an existing version of Windows is Ee Windows 7 32 bit 64 bit and Windows 8 32 bit can t be installed when Launch CSM is JP ning recommend backing up your ls before you proceed set to Disabled in the BIOS setup Custom advanced Install a new copy of Windows This option does not keep your files settings and programs The option to make changes to disks and partitions is available when you art your computer using the installation disc We recommend backing up your files u proceed 4 1 Install Windows 7 8 1 Connect the Windows 7 8 Install USB Disk or USB DVD ROM drive to one USB port of NanoPC 2 Press power on button to turn on your computer 3 Put the Windows 7 8 Install CD into the USB DVD ROM drive if you use the USB DVD ROM drive 4 Computer will choose the boot device by BIOS default and start loading the files for installing the OS LA Please press lt Del gt or lt F2 gt key to enter BIOS Setup if you want to change the first boot 8 The setup will the display the hard disk partitions 160GB in
5. Technical Support Team Website Copyright C 2011 by FoxconnTechnology Group All Rights Reserved R ENANA E E E LLL AAA Statement This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Warning FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the
6. be sure not to cover it and keep it away from your body to prevent discomfort or injury by heat exposure m Please use the power adapter that comes with the product s package wrong power adapter may damage your device m Make sure all the peripherals are properly connected before using NanoPC m This product should only be used in an environment with ambient temperatures between 0 C and 40 C m Always shut down the computer before installing or uninstalling the peripheral which does not support hot plug m Disconnect all peripherals before servicing or disassembling this equipment m Please do not disassemble this product by yourself any disassembly not approved by the original manufacturer may result in malfunction and void warranty m Risk of explosion if battery is replaced by an incorrect type please dispose of used batteries according to the instructions y f f f AAA EA eee AS SA Package Contents NX aN Y AA 2 Qui ick Stalin Screws and Mini PCle Half i DVI VGAA USB Flash Disk Card Support Bracket GA Adapter P We DO NOT guarantee it is in compliance with the Safety Certificates if you add on an extension cable to NanoPC USB Flash Disk in the package CARA E E E ILL LLO ALLI LIA ALLI LIA AAA LISA ALLI LIA ALLA II AAA ALL A AAA TABLE OF CONTENTS Introduction A O A eR ee 2 1 2Back SO A A Seat I A A CE OR 4 Placement and connecting as o e re A 7 ette Me pj o AA E S T er cr
7. receiver is connected Consult the dealer or an experienced radio TV technician for help Caution Any changes or modifications not expressly approved by the grantee of this device could void the user s authority to operate the equipment RF exposure warning This equipment must be installed and operated in accordance with provided instructions and the antenna s used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co located or operating in conjunction with any other antenna or transmitter End users and installers must be provide with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance A C E eee AAA Warning statement for Europe Also put in the manual which directive to fulfil and also which countries to sell the product Example of a text to tell which directive has been fulfilled Hereby Foxconn declares that this AT 5000 Series is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC CATARATA
8. 6000000 NanoPC Users Manual AAA E eee AAA ee eee Trademark All trademarks are the property of their respective owners Version User s Manual V1 0 for NanoPC Symbol description Note Refers to important information that can help you to use NanoPC better and tells you how to avoid problems Caution Indicating a potential risk of hardware damage or physical injury may exist C WEEE The use of this symbol indicates that this product may not be treated as household waste By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed informa tion about recycling of this product please contact your local city office your house hold waste disposal service or the shop where you purchased this product All rights reserved All trade names are registered trademarks of respective manufacturers listed All images are for reference only please refer to the physical product for specific features ANA E E E EE AAA N Safety Notice J Before using this product please read the below safety notice carefully this will help to JN extend the product s lifecycle and work normally When NanoPC is working please make sure its ventilation system is working m The power adapter is dissipating heat during normal use please
9. Use these options to install all the drivers for your system You must click AMD Chipset Driver to install it first After that you can click One Click Setup and then choose the items you want to install or you can click on each individual driver to install it manually 4 After installing all the drivers you need to restart your NanoPC then you can start using it UTILITY E WA Fox WINFLASH Fox WINFLASH is a useful utility to backup and update your system BIOS Supporting Operating Systems m Windows XP 32 bit 64 bit m Windows 7 32 bit 64 bit m Windows 8 32 bit 64 bit 1 Local Update 1 1 Local Update BIOS Information This page lets you know your system BIOS information Minimum Exit Pi A ETR al ET gt a FOXCONN WINFLASH Y Local Update BIOS Info MainBoard Type Backup BIOS Toolbar i A Update BIOS BIOS Version Release Date sow cumani BIOS information BIOS Size ROM Part Note BIOS Size 32Mb 32M bit 4M Byte BIOS Size 16Mb 16M bit 2M Byte Please refer to the physical motherboard for details EXA NETA VSSSLSSSSLESSSSASAS SS SI SASSI LASS LISS AS SLSSLI ASA SSS LL ASSL HN rr PE UTILIT 1 2 Local Update Backup BIOS This page can back up your system BIOS You can click Backup BIOS and key in a file name then click Save to finish the backup operation The extension of this backup file is ROM for AMI BIOS Make s
10. ed Space 160 0 GB Load Driver a Extend 4 Refresh A Delete A Format JE New Load Driver SE Extend Sze 700 MB Apply y ting information 2 Installi 10 The setup program will then start to install Windows 7 8 on your hard disk During the installation your computer will restart several times 1 Collecting information 2 Installing Windows Installing Windows To ensure that all Windows features work correctly Windows might create additional partitions for system files So you will see a 100MB partition reserved by system after you create a partition Select the 70GB partition and click Next to continue That s all the information we need right now Your computer will restart several times during installation sf Copying Windows files Windows files 1 Installing features Installing updates Completing installation fi Collecting information 2 Installing Windows ENANA 11 When the installation is complete setup will prepare your computer for it s first use You can then follow the steps to select system settings create an account set a password etc until the whole process is completed 4 2 Install Drivers 1 When the Windows 7 8 is completely installed you have to install the necessary drivers before using the NanoPC Connect the NanoPC USB Flash Disk to your system 2 Waiting for a few seconds the main menu will be displayed on the screen 3
11. et Line out SPDIF out port Connects to powered analog speakers or recording devices with optical connectors 3 5mm jack SPDIF function requires additional adapter and adapter cable Power input port Connect power cord that come with your product T 2 1 Placement of NanoPC Erected on the desk 1 Place your NanoPC into the groove of the Seat Base i Y sonne o oe S g e Installing to Display 1 Assemble one side of the VESA mount P L IN C E M E N T INN D C O N N E Cl N G ANNO a 2 Fasten it onto the display with four screws 3 Fit the NanoPC into the VESA mount in the correct alignment Paes MEN CC P PLACEMENT INID CONNECTING 4 Install the other side of the VESA mount To fasten the VESA mount your display must comply with VESA75 or VESA100 standard MO 7 AO PLACEMENT INN CONNECTING ANNAN HHH LILII LLALL SAS AAA LASA SAA AAA AAA AA AAA ASAS VIII LASS PLACEMENT INN CONNECTING 2 2 Connection of NanoPC Connect USB devices Connect display Connect USB devices to the USB ports for example mouse keyboard devices There are two USB 3 0 ports on the front side of your NanoPC you need to install the USB 3 0 driver Connect a display or TV that has HDMI port or DVI VGA port to your NanoPC in NanoPC USB disk before using them You can co
12. mnLeerecer eee T7 lnstalingto Display a re eee a E ren T7 2 2ECONMECtIOMONNINO RE AA E o 10 Connecrdispla yor aa a tne eR Cem ermenrmtn ener nba anne nenemaer tr nee nett arcat eb eenea rr errata tne Rte nt 10 Commerc USE Ce ViCe San cece wrt aee ee E or E E essa ene tee cect 11 COMMU o e DES ao aces ss A O ee ee teeta dace 11 CoOnmechWOWel o sess secrete etree c cee eae ce ee annnne eee ae a peee eee eceee 12 BIOS Setup E wee eee PPE E MONE EPEN EY A 42 ce eeeeeeererrrrre 14 CLF Tein ee ete Se ee Pe ee ee ae A 15 Advanced TAr glee A eee See PRR PeeE Er 16 16 6 peer eer cette t aE Scot feceeeer tet ee eee rene peo rer rr eter cet ceet raiment mee ston cor rence nereer ee 18 Secunity pene a aa nate ne tise eer E tater cman a kattmeny A T eet 20 Se NYAS hal EN ere E Ee em O 21 4 1 Install Windows 7 8 A DUNS R tre wet OAR AGE a TRE PA 24 FeO NIST IDRIS ree eet eee reece A T eee entree enna 28 SA O ene E eo er mene name Pus 30 WAE Cal ME Gia betas a ttnaneoo aera ee oe anna a cece ta E T 30 A o ee 32 gt 0000000 e 0 0000 eeecce INTRODUCTION ANNO uE CE P INTRODUCTION 1 1 Front Side View 1 O 2 3 SSe lt gt 3 0 4 msisom MC 5 A 6 Mm 7 Q Q 2 n My ENANA Power button with Power indicator LED Press to turn your NanoPC on or off the LED can indicate your system states Speaker USB 3 0 port This USB port supports the USB 3 0 2 0 1 0 specification Use
13. nnect a VGA display to the DVI port by using the DVI VGA adapter poo 0 Connect network cable Connect one end of a network cable to the RJ 45 LAN port and the other end to a hub or switch Pda m Please use the customized DVI VGA Adapter that comes with your NanoPC to get a L2 e i higher resolution on your VGA display m You could have access to display adjustment for some HDTV or HD display connected via HDMI port by using the scaling function in AMD VISION Engine Center a utility which is available after the installation of AMD Chipset Driver And you can initiate this utility by first right clicking on Desktop and selecting it then further choosing Scaling Options Digital Flat Panel in My Digital Flat Panels co AN Connect power cord Connect the power adapter to the power input port of the NanoPC and then press the power button to start it E 2 m0 SE ki LS Cam Q B O S S ET U P ANNO AAA Y fl Enter BIOS Setup The BIOS is the communication bridge between hardware and software correctly setting up the BIOS pa rameters is critical to maintain optimal system performance Power on the computer when the message Press lt Del gt or lt F2 gt to enter setup Press lt F11 gt to enter boot menu
14. ou also can save or discard the changes and exit BIOS setup here ERAN A EPEE SEESE AVATAR EES EE EEEL EEEE E EEES EEEE EEE EEEE ALAS TSS BIOS SETUP E O A A Main Aptio Setup Utility Copyright C 2012 American Megatrends Inc Main EALO e M Boot Security Save amp Exit BIOS Information Set the Date Use Tab to BIOS Vendor American Megatrends switch between Date elements BIOS Build Date 10 26 2012 13 37 02 Embedded Control Version 12 F1 03 System BIOS Version C72F1P02 CPU Information AMD C 70 APU with Radeon tm HD Graphics Processor Speed 1000 MHz Microcode Revision 500010d Memory Information Total Memory 2048 MB DDR3 1066 4 Select Screen Fri 26 2012 44 Select Item System Time 14 21 24 Enter Select oa Change Opt Access Level Administrator Fl General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit ESC Version 2 15 1231 Copyright C 2012 American Megatrends Inc gt System Date lt weekday gt lt month gt lt date gt lt year gt format Day weekday from Sun to Sat this message is automatically displayed by BIOS Read Only Month month from 1 to 12 Date date from 1 to 31 Year year set up by users Use ENTER TAB or SHIFT TAB to select a field Use or to input the value gt System Time This item allows you to configure the desired time Use ENTER TAB or SHIFT TAB to select a field Use or to input the value The three field
15. s of the setting are lt hour gt lt minute gt lt second gt respectively Access Level It displays your current access level If you enter system with a user password it will display User If i Ii 5 BIOS SETUP ANNO AAA AAA NAAA no password is set or you enter system with administrator password this item will display Administrator Advanced Aptio Setup Utility Copyright C 2012 American Megatrends Inc Advanced MITA TA A O E Select the SATA Mode Deep Sleep Support Enabled USB 2 0 Port S3 Wakeup Enabled Option LAN USB 3 0 Port S3 Wakeup Enabled 1 IDE Mode Restore on AC Power Loss Last State 2 AHCI Mode Supporting C6 power state Disabled Integrated GPU UMA Frame Buffer Auto Select Screen Change Opt Fl General Help F2 Previous Values F3 Optimized Defaults F4 Save amp Exit ESC Version 2 15 1231 Copyright C 2012 American Megatrends Inc gt SATA Mode This item is used to set the operation mode of your SATA ports IDE Mode This configures the SATA ports to support IDE mode AHCI Mode The Advanced Host Controller Interface AHCI specification describes the register level interface for a Host Controller for Serial ATA The specification includes a description of the hardware software interface between system software and the host controller hardware AHCI provides more advanced features including SATA features but some SATA drives may not support AHCI unless
16. they are labeled with AHCI support in its specification If your motherboard supporting AHCI and you have a SATA device which also supports AHCI then AAN E A E LLO LI ALLA IL IA ALLI LIA AA ALLI A ALLI LIA AAA LIA AAA LA A BIOS SETUP A E AAA EAS you can select IDE option to have fair performance or you can select AHCI to get its best performance AHCI mode is not available under Windows XP please select IDE mode gt Deep Sleep Support This item is used to enable or disable Deep Sleep Support function When entering deep sleep mode system S4 S5 only can wake up from power button gt USB 2 0 Port S3 Wakeup This item is used to enable disable the USB 2 0 device s to generate a wake up from S3 state gt LAN USB 3 0 Port S3 Wakeup This item is used to enable disable the LAN USB 3 0 device s to generate a wake up from S3 state gt Restore on AC Power Loss This item is used to set which state the PC will take with when it resumes after an AC power loss gt Supporting C6 Power state This item is used to enable or disable the supporting C6 power state Integrated GPU UMA Frame Buffer Allocates system memory for use as video memory to ensure the most efficient use of available resources for maximum 2D 3D graphics performance This is a memory allocation method addition to the Unified Memory Architecture UMA concept wherein a static amount of page locked graphics memory is allocated during driver initialization This fixed amo
17. this example of your system If there device for installing the OS were other systems such as Linux installed previously you need select them and click Drive options advanced to delete them When all partitions are clean setup will display the biggest size of your 5 When the installation windows popup set the related items and click Next to continue then click hard drive Install now button to start the setup When the license terms appear choose accept and click Next to continue 7 It will then ask you to select the installation type Click Custom advanced to install a new copy of Windows O Where do you want to install Windows Total Size SA Disk 0 Unallocated Space 160 0 GB ENANA N STALL OS ANNO m a E VILA LISAS LISAS SAS AI AA SAA LILIA L AI AAA LILII IL ISSA LSALI IL N STALL OS 9 In the hard disk size screen you can click the new button to create partitions as you need In this example we are creating a 70GB partition to install Windows Make your modifications and click Apply Where do you want to install Windows Total Size _Type gt Disk 0 Partition 1 System Reserved 100 0 MB 86 0 MB System 52 Disk 0 Partition 2 68 3 GB 68 3GB Primary gt Disk 0 Unallocated Space 91 6 GB 91 6 GB Where do you want to install Windows Total Size z 4 Refresh 7 lt Delete P Format gt Disk 0 Unallocat
18. this port for USB devices such as keyboard mouse USB printer USB flash drives and hard disk drives etc You need to install the USB 3 0 driver in NanoPC USB Disk before using it Multi Function card reader This memory card reader supports SD SDHC MS MS Pro MMC memory cards used in devices like digital cameras mobile phones Media players and so on Microphone SPDIF in port Connects to a microphone or playback devices with optical connectors 3 5mm jack SPDIF function requires additional adapter and adapter cable Headphone Connects to a headphone Kensington lock Attach a Kensington security system or a compatible security lock to secure your NanoPC in place T INTRODUCTION ANNO el at CIC INTRODUCTION 1 2 Back Side View 4 DVI HDMI ip DCIN USB 2 0 port This USB port supports the USB 2 0 1 0 specification Use this port for USB devices such as keyboard mouse USB printer USB flash drives and hard disk drives etc DVI port Connect monitor or TV that uses DVI connector to this port By using the DVI to VGA adapter that comes with your product you can also connect a VGA compatible devices such as a monitor or projector HDMI port The HDMI High Definition Multimedia Interface port supports Full HD display devices Connect monitor or TV that uses HDMI connector to this port RJ 45 LAN port Supports 10 100 1000Mb s Ethernet network Connect network cable to access Intern
19. unt of memory will provide the user with a guaranteed graphics memory at all times and will no longer be available to the OS ERIGE BIOS SETUP ANNO el El UC BIOS SETUP Boot gt Built in EFI Shell Support This item is used to control whether the Built in EFI Shell appears in the Boot Option You can set the Built in EFI Shell option boot priority in Boot Option Priorities listing when this item is set to Enabled gt Boot Option Priorities These items are used to set the system boot order Aptio Setup Utility Copyright C 2012 American Megatrends Inc anced 200t ICAA AN E Exit Vy SAVE Q i Bootup NumLock State gt Bootup Numlock State This item defines if the keyboard Num Lock key is active when your system is started The available settings are On default and Off gt Quiet Boot This item is used to enable disable the quiet boot Disabled Displays the normal POST messages Enabled Displays OEM customer logo instead of POST messages gt Fast Boot While Enabled this option allows BIOS to skip certain tests while booting this will shorten the time needed to boot the system gt Launch CSM This item controls if CSM will be launched gt Launch LAN OpROM policy This item controls the execution of UEFI and Legacy PXE OpROM Nae B O S S ET U P INN NOOO NOOO OI NOOO ON m a Security Aptio Setup Utility Copyright C 2012 American Megatrends Inc LE EUA IA Sec
20. ure you can remember the file name together with the directory which it is stored prevented that you may need them to recover your BIOS later Name Date modified Le PerfLogs 2009 7 14 11 20 Le Program Files 2009 7 14 15 46 Le Program Files x86 2012 1 7 12 25 Le Users 2012 1 7 11 59 L Windows 2012 1 7 12 24 7 Key in a BIOS name Fie name Click to Save Save astype ROMAeCROM O o Ce 1 1 3 Local Update Update BIOS This page helps you to update your BIOS from a local file After click Update BIOS An alert message will be displayed to ensure if you really want to continue click Yes to confirm A setup wizard will guide you to load a local BIOS file to finish the operation You must remember from which directory to load your new BIOS file with an extension of RONW for AMI BIOS before the setup wizard starts IES U TI L TY INNER A q 4 a O a Updating may cause some problems eg the computer w restarting may be failed which are not guaranteed by Foxconn s product warranty Are you sure to continue Yes No RON Pat 2 About amp Help This page shows some information about Fox WINFLASH a LA pia ee FOXCONN WINFLASH _ gt gt l Local Update v 4 About amp Help is Y About amp Help 2 FOXCONN WINFLASH Version 1 0 0 0 PackageVersion 1 0 1 5 Home Page http www foxconnchannel com Contact Us
21. urity IRENE Password Description Set Administrator Password If ONLY the Administrator s paeeword is set then this only limits access to Setup and is only asked for when entering Setup If ONLY the user s password is set then this is a power on password and must be entered to boot or enter Setup In Setup the user will have Administrator right The password length must be in the following range Minimum length maximum length Select Screen t4 Select Item User Password Enter Select Change Opt General Help Previous Values Optimized Defaults Save amp Exit EXE Version 2 15 1231 Copyright C 2012 American Megatrends Inc gt Administrator Password This item is used to install or change administrator password After you input administrator password it then will ask you to confirm the password User Password This item is used to install or change user password ENANA Lae VLSSSSSSSSAISLSALSAAS IS EE EEEL E EEEE EESE SSS SSS SSS SSS LASTS BIOS SETUP A PO AAA A Save amp Exit Aptio Setup Utility Copyright C 2012 American Megatrends Inc EN NT IMAN Save 8 Exit Set Administrator Password Discard Changes and Exit Save Changes and Reset Discard Changed and Reset Save Option Save Changes Discard Changes Restore Defaults Save as User Defaults Restore User Defaults Boot Override gt Select Screen t4 Select Item Select Change Opt General Help Previous Values Optimized
Download Pdf Manuals
Related Search