User Manual
Contents
1. the direction of optimum coverage 5 Install the product on a solid surface away from any heat sources High temperatures could cause the motion sensor to malfunction Setting up the floodlight Adjust the VR using the three controls located at the base of the motion sensor O Q O wo q tux Oime SENS SENS Rotate Decrease detection range to min 5m Sensitivity Setting Rotate Increase detection range to max 15m LUX 3 4 Rotate q Standby on 24 hours Timing of Lighting Rotate xt Standby at nighttime un n Continuous lighting for 5 seconds TIME Rotate Lighting Time Rotate Continuous lighting for 12 minutes For 12 minutes lighting Turn arrow to 4 o clock For 7 minutes lighting Turn arrow to 2 o clock For 5 minutes lighting Turn arrow to 12 o clock For 2 minutes lighting Turn arrow to 10 o clock For 5 seconds lighting Turn arrow to 8 o clock Connecting the camera ne SSL20S Connecting Lead M BNC socket video output pinti lg l2. Specifications Model Picture Type Image Sensor DSP Resolution Lens Viewing Angle Infra Red Nightvision Minimum Illumination PIR Detection Range PIR Angle Floodlight Watts Audio Operating Voltage Mounting Weatherproofing Dimensions WxHxD SSL150 Colour Panasonic 1 3 CCD Xvision XC1 420 TVL 78 No 0 3 Lux peje 5 12 metres 140 150W No AC100V 240V Wall Yes 138x225x133mm SSL300 Colour Sony 1 3 Super HAD CCD Xvision IXC1 A80TVL 78 No 0 Lux when 0 1 Lux light on 5 12 metres 140 300W No AC100V 240V Wall Yes 185x245x125mm evision Wy L F i f p A D i TECHNICAL SUPPORT For Technical Support for any Xvision product please contact your local distributor LIMITED WARRANTY This product is supplied with a 1 Year warranty The Warranty excludes products that have been misused including accidental damage and damage caused by normal wear and tear In the unlikely event that you encounter a problem with this product it should be returned to the place of purchase Manufactured exclusively for Xvision Europe Group Head Office London U K Email info x vision co uk Web www x vision co uk Model L150 300 Smart Security Light Max with built in Camera Before you begin Please unpack the box carefully and identify that all the parts are present The Smart Security Light Max is designed for ou
3. e floodlight use cotton wool balls dipped in alcohol or glass wipes Turn off all power to the unit before opening the glass cover or changing the bulb 2 Product Description SSL150 An excellent all in one product designed for houses and small businesses The SSL150 Smart Security Light combines a 150W PIR Activated Floodlight and a High Resolution Colour Camera in to one compact unit SSL300 An excellent all in one product designed for large houses and business premises The SSL300 Smart Security Light Max combines a 300W PIR Activated Floodlight and a High Resolution Colour Camera in to one compact unit The SSL150 has a Panasonic 1 3 CCD image sensor for 420TVL resolution images and 0 3 0 lux Light On low light sensitivity and the SSL300 also has a Sony 1 3 CCD image sensor for Colour 480 TVL resolution images and 0 1 0 lux Light On low light sensitivity The SSL150 and SSL300 feature a 3 6mm lens with 78 viewing angle for sharp images and easy selection of the optimum viewing angle during installation a SSL150 SSL300 Smart Security Light Max with lead and mains 3 pin plug 5 Installation amp Operation 1 Install the product at a height of 2 to 2 5 metres to achieve the best detection range from the PIR 2 Check the voltage AC 100 to 240V before installation 3 When replacing the halogen bulb do not touch the glass surface with your fingers 4 Make sure that the movement sensor is pointed in
4. tdoor use Please bear in mind the following points when choosing a mounting position The camera must be positioned so that it will not point directly into the sun sunrise and sunset or any bright light as this may cause damage to the camera Avoid viewing areas where half the area is in bright sunlight and the other half is dark such as in the shadow of a building All types of cameras have difficulty in seeing with such a large lux level variation Do not cut the camera cables this will void the warranty Make sure you use only the recommended power supply Damage caused to the unit by incorrect voltage or wiring is not covered by the warranty Model SSL150 300 Smart Security Light Max with built in Camera Thank you for purchasing this Xvision camera Before operating this product please read this instruction manual carefully 1 Safety Precautions RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT OPEN COVERS UNLESS MAKING LENS ADJUSTMENTS NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL When in use please avoid direct contact with eyes and do not touch the unit s body as it can get very hot When installing the unit please avoid pointing it directly at paper or flammable materials Please avoid all direct contact with the halogen bulb to avoid contamination If you need to clean the glass cover of th
Download Pdf Manuals
Related Search