Multibeam 1018, 54 Watt LED - Texas Scenic Company, Inc.
Contents
1. button 5 until the display shows D indicating operation in d DMX mode Shortly after that the display shows the DMX starting address Set DMX address by using the UP DOWN buttons 6 or 7 In this mode the knob 1 is disabled The unit requires 4 DMX channels DMX channel Value Range Function CH1 000 255 Red level CH2 000 255 Green level CH3 000 255 Blue level CH4 000 127 Master output level 128 227 Strobe 128 slow 227 max speed 23 Hz 228 255 Master level full on Strobe off Getting started choosing a location Risk of fire These units of passive RGB LED panels have been designed to work in dry indoor environments at environmental temperatures up to 105 degrees Fahrenheit Do not e Operate the units of passive RGB LED panels in environments with more than 105 F environmental temperature or more than 80 humidity e Operate the units of passive RGB LED panels in any closed environment unless forced air convection is provided e Operate less than 24 distance from any flammable surface Getting started secure mounting The units of passive RGB LED panels can be mounted in various ways Floor standing operation Turn the bracket to the lower side of the unit and fold out the second bracket e Place the unit in a secure position Use the provided cable slots in the bracket to route cables e Make sure to comply with cooling requirements of the power s2. RN APOLLO 4130 Fourier Dr Fort Wayne IN 46818 USA i ee Voice 1 260 497 9191 Fax 1 260 497 9192 International 00 1 260 497 9191 www apollodesign net RevB 10 2008 Order code 12 010 0013 80401 1 01 12 06 11 MULTIFORM Passive RGB LED panels USER MANUAL Mullibeam Table Of Contents PAGE PAGE HNtrOMUCKION issii 1 Getting started choosing a location ssssssccsesssseeees 4 Product description sssssemmsnanenetinanananeninin 1 Getting started secure MOUNTING sssssseessssesssesesesees 4 Security advice before USC sssssssseessceecsssseeseesssnseseess 2 y Technical data seeseccsssssssssssccessssseessccecsssssssesceesssnnseeeeeee 5 Health advice s sscsissiasscatescciseassiati bsbeavadentcitssa seinen 3 User interface OVErViGW ssssssssscscessssseeeseceesssseeeceeseneee 5 Functional advice sesssscccsssssessscceccsssseseccessssnuseeseeeeenaee 3 ET T 3 Op ratioi sunnin 5 9 Un packing senening anna 3 Warranty nniacnsiinenninaaan anann an 9 Introduction Dear Customer Congratulations on the purchase of the Mulitbeam 1018 LED fixtures from Apollo Apollo is the US exclusive distributor for Multiform a leading global manufacturer of professional lighting equipment with decades of experience in design production and quality assurance To meet your requirements this unit has been designed and built to the highest standards so we can assure that you have ma
3. activation Speed A18 Hard fade all colors Sound activation Speed A19 Random speed Red Yellow None A20 Random speed Blues None A21 Random speed Red Blue Magenta None A22 Random speed All None A23 Strobe White Sound activation Speed A24 Strobe Red Sound activation Speed A25 Strobe Green Sound activation Speed A26 Strobe Blue Sound activation Speed A27 Strobe Red Green Blue Sound activation Speed
4. at no part of the installation can drop more than 9 if the main attachment fails Never stand directly below the device when mounting removing or servicing the fixture The installations should be inspected every year by a skilled person to ensure safety Use the provided cable securing slots in the bracket to secure any cables using a cable tie Make sure to comply with cooling requirements of the power supply Technical data Multibeam 1018 LED s total 18 RGB LED s red 18 LED s green 18 LED s blue 18 LED type 3W RGB Beam angle 30 Power requirements ow Max Current sensing Weight 7 5 lbs 3 4 kg Multibeam 1018 User interface Sai ers overview MERDA 4g s 1 In A Mode Speed Control except A1 Mix Control In C Mode Level Control 2 Display showing the Mode DMX address LOC function etc 3 Indicates presence of a DMX signal 4 Indicates the sound activated mode internal microphone MODE selection button UP button DOWN button Internal microphone So oN OO Switches on or off the termination for the last unit in the DMX chain 10 Switching the display on or off with delay 11 Maintenance not in use 12 VOLTAGE Input 90 250VAC 50 60 Hz Auto Sensing 13 DMX Output connector 14 DMX Input connector Operation The 1018 has several operating modes for internal and external operation A Auto Mode Press the MODE
5. button 5 until the first digit on the display shows A indicating operation in auto mode Choose a pattern by using the UP DOWN buttons 6 or 7 see list below NOTE The A Mode is automatically disabled when an external DMX signal is present Use control knob 1 to mix color in pattern 1 Use control knob Use control knob 1 to select speed in pattern 2 through 27 Use control knob 1 from 0 to 10 to activate sound control feature for pattern 10 through 18 and 23 through 27 1 from 11 to 100 to control speed for pattern 10 through 18 and 23 through 27 Description Function of Knob 1 AO Alloff None Al Static scene Mix A2 Soft fade Red Green Mix Speed A3 Soft fade Green Blue Mix Speed A4 _ Soft fade Red Blue Mix Speed A5__ Soft fade Red Green Mix 2 Speed A6 _ Soft fade Green Blue Mix 2 Speed A7__ Soft fade Red Blue Mix 2 Speed A8 _ Soft fade Blue Magenta Mix Speed A9 Soft fade Red Green Blue Speed A10 Hard fade Red Green Sound activation Speed A11 Hard fade Green Blue Sound activation Speed A12 Hard fade Red Blue Sound activation Speed A13 Hard fade Red Amber Sound activation Speed A14 Hard fade Green Magenta Sound activation Speed A15 Hard fade Blue Magenta Sound activation Speed A16 Hard fade Light Blue Magenta Sound activation Speed A17 Hard fade Red Green Blue Sound
6. de a sound investment To take full advantage of all possibilities and for your own safety and the safety of your environment please read these operating instructions carefully before you start using the unit Product description The Multibeam 1018 is an RGB LED panel provided with an integral constant current current sensing power supply The 1018 LED panel uses 18 super bright 3W RGB LEDs and provides a unique solution for all indoor applications that require a wide angle high brightness color mixing wash light with maximum ease of use from club to stage lighting from commercial to architectural purposes Other Quality Products From Apollo Stainless Steel Gobos Glass Gobos Gel Right Arm Smart Color PRO Scrollers Smart Move Rotators Smart Move Vertical Smart Power Power Supplies EZ Iris DMX Spotlight Mini Architectural Luminaires Tape Dichroics Pattern Holders Cable Tapered Top Hat DMX Value range Function Security advice before use CH2 000 255 Level CH3 050 255 Chase speed Warning Read this section carefully before installing powering operating LA cleaning or servicing this product CH4 000 049 Stobe off 050 255 Strobe 050 slow 255 max speed 23 Hz The following symbols are used to identify important safety information in this manual In this mode the knob 1 is disabled N AN DANGER WARNING WARNING WARNING WARNING Addressing has to be done a
7. ed by not following the safety precautions and instructions printed within this manual Products being returned for warranty repair must display the original serial number sticker Removal of the serial number sticker voids the product s limited warranty Warning Class 1M LED duct arning Class product 1 Do not look into the beam from a distance of less than 16 inches 40 cm 2 Do not stare into the beam for extended periods at a short distance 3 Do not view the beam directly with optical instruments such as magnifiers Despite the care taken for the compilation of this book Apollo Design Technology Inc cannot be held responsible for any damages resulting from errors that may appear in this book All efforts have been made to provide the most accurate up to date instructions and illustrations possible e Need assistance Call Apollo at 800 288 4626 for details Protection from electric shock 1 Do not expose this unit to any dripping or splashing liquids Do not submerge unit Do not place objects filled with liquids on the unit Do not operate this unit near open water or in high humidity Do not open the unit for service purposes There are no user serviceable parts inside Warranty will be void in any case of unauthorized service by the user or other persons Keep this information handy if requiring technical assistance Protection from fire 1 Take care not to place the unit near sources of heat e g powerful amp
8. ern CH1 Pattern 000 015 Soft fade Red Green 136 150 Hard fade Green Blue 016 030 Soft fade Green Blue 151 165 Hard fade Red Blue 031 045 Soft fade Red Blue 166 180 Hard fade Red Yellow 046 060 Soft fade Red Yellow 181 195 Hard fade Hot Pink Lime 061 075 Soft fade Hot Pink Lime 196 210 Hard fade Pink Blue 076 090 Soft fade Pink Blue 211 225 Hard fade Turquoise Pink 091 105 Soft fade Turquoise Pink 226 240 Hard switch Red Green Blue 106 120 Soft fade Red Green Blue 241 255 Hard switch All Colors 121 135 Hard fade Red Green C Color Mode Press the MODE button 5 until the first digit on the display shows C indicating operation in color mode Choose a color by using the UP DOWN buttons 6 or 7 see list below Knob 1 determines the output level Available color presets co all off C10 Blue Green C1 Red C11 Lavender C2 Green C12 Hot Pink C3 Blue C13 Flesh C4 Yellow c14 Light Blue Green c5 Pink C15 Light Green C6 Turquoise C16 Light Purple C7 Lime C17 Light Lavender C8 Orange C18 Light Blue C9 Marine C19 White SLA DMX Slave Mode Press the MODE button 5 until the display shows SLA indicating operation in slave mode In this mode the unit is set to DMX channel 001 in order to receive the signals from a master 1018 unit being in mode A or C The knob 1 is disabled D DMX Mode Press the MODE
9. esponding sign is printed on the backside of the unit Any change or modification may affect the operation of the unit s electromagnetic radiation Any modification to the unit will void all electrical certification The manufacturer distributor takes no responsibility in this case Functional advice This unit is immune to the presence of electromagnetic disturbances both conducted and radiated up to a certain level Under peak conditions the unit is classified to show a class C performance criteria and may encounter temporary degradation or loss of function In such a case power down the connected power supply and power it on again to recover Environmental advice This unit is built to conform to the ROHS standards and the WEEE directive 2002 96 EC of the European Parliament and of the Council of the European Union Under these regulations the product shall not be discarded into regular garbage at the end of its life but shall be returned to authorized recycling stations It is highly recommended that North American users follow environ mentally safe disposal recycling practices Unpacking E Please check that the box contains the following items Main parts 1 Multibeam1018 main unit 1 operation manual Accessory parts 1 M6 security lug 1 power cable If any part is missing please contact your dealer immediately for replacement Addressing has to be done as follows 001 first device CH 1 4 factory default 005
10. lifiers fog machines 2 Allow at least 6 between this unit and other devices or a wall to allow for proper cooling 3 Be sure this fixture is kept at least 24 away from any flammable materials 4 Allow sufficient air convection in the unit s environment to avoid overheating Make sure air convection slots are not blocked Do not operate this unit in environmental temperatures exceeding 105 Fahrenheit 5 Do not attach gel or diffusion directly to the front of the LEDs SSS Protection from injury and damage 1 Never use accessories or modifications not authorized by the manufacturer of this unit 2 Choose a location for operation where the unit is protected from vibration and where a fixed mounting position is provided In case of overhead mounting follow appropriate rigging rules and regulations for rigging safety including the use of an approved safety cable Our units ship with integral power supplies 3 The connection to a power supply must be carried out by qualified and certified personnel only 4 Do not expose this unit to any dripping or splashing liquids Do not operate this unit near or in open water or in high humidity There are no user serviceable parts in the unit Return the unit to qualified personnel for repair Health advice This unit produces and absorbs electromagnetic radiation The strength of radiation and the sensitivity for disturbing interference conforms with CE and FCC requirements A corr
11. s follows Safety hazard Risk Hazardous voltage Fire hazard LED light emission Read manual before of injury or death Risk of severe or fatal Risk of severe eye installation and 001 first device CH 1 4 factory default electric shock damage operation 005 second device CH 5 8 General advice 009 third device CH 9 12 1 Read this manual completely before using the product 013 fourth device CH 13 16 and soon 2 Keep this manual in your records for future reference 3 Follow all instructions printed in this manual otherwise warranty may become void 4 Follow all printed security advice on the product The lightning flash with arrowhead within an equilateral triangle warns of non insulated AC main voltage inside the unit The exclamation mark within an equilateral triangle Warranty E warns of important operating and maintenance instructions in the literature attached to this product Failure to follow all Items are covered for defects in materials and workmanship for one year including repair parts and repair labor on defective item AEE E eia yen may m the Hs rarity d ieee haniai and or electrical from date of Apollo invoice The warranty covers freight for 30 days after initial purchase Apollo does not cover any other loss 3 Carry this product with care TOppIng heey Vi ration may damage this pro uct mechanically and or electrically resulting from product failure 6 The manufacturer takes no responsibility for injury or damage caus
12. second device CH 5 8 009 third device CH 9 12 013 fourth device CH 13 16 and so on This setting is stored even if the device is switched off P DMX Preset Mode If you want to run the pre programmed patterns and scenes by an external DMX controller you can use the DMX Preset Mode Press the MODE button 5 until the display shows P indicating operation in P DMX Preset mode Set the DMX starting address by using the UP DOWN buttons 6 7 The unit receives DMX values on a packet of four channels and mirrors the received data on the DMX output 13 If a DMX signal is present the DMX LED 3 will turn on The four channels control the unit as follows If DMX value of channel 3 is lower than 50 the unit works with static colors DMX Channel Value Range Function CH1 000 255 Output color choice from presets see C mode CH2 000 255 Master output level CH3 000 049 Static color mode active CH4 000 049 Strobe off 050 255 Strobe 050 slow 255 max speed 23 Hz Output mix presets can be activated by means of CH1 The chosen mix can be adjusted with CH2 If the value of CH4 is above 50 the unit is set to strobe mode The strobe speed for any fixed output mix chosen on the first channel can be adjusted from zero value lt 50 to 23 cycles per second value 255 If DMX value of channel 3 is equal or higher than 50 the unit works in pattern mode CH1 Patt
13. upply Hanging Rigging ceiling mounted operation Risk of injury Overhead mounting requires extensive experience including among others calculating working load limits good knowledge of the installation material being used and periodic safety inspection of all installation material and the unit If you lack such qualifications do not attempt the installation yourself Improper installation can result in body injury Be sure to complete all rigging and installation procedures before applying power to the unit Leave the inner and outer bracket folded The unit should be installed out of reach of people and areas where persons may walk or be seated Make sure that the installation area can hold a minimum point load of 10 times the device s weight In fixed installations attach the unit with self locking screws nuts to the mounting point When mounting the unit to truss be sure to secure an appropriately rated clamp available from Apollo to the hanging yoke through the center hole of the hanging yoke Attach the supplied M6 safety lug to the rear side thread insert rigging point and secure the installation with an appropriate safety cable fixed to an individual separate mounting point Be sure to only use the designated rigging point for the safety cable Always use a certified safety cable that can hold 12 times the weight of the device when installing the unit This secondary safety attachment should be installed in a way th
Download Pdf Manuals
Related Search