Arena Q7 Zoom User Manual ver 2
Contents
1. 31 45 546 85 66 31 45 546 85 96 fax www elationlighting eu DOCUMENT VERSION IE Please check www elationlighting com for the latest revision update of this manual a DMX ocumen oftware Channel Modes Version Version 0 0 Added DMX channels and traits 8 10 15 9 6 7 9 10 15 16 ar Updated DMX channel 16 traits 2 ARENA G7 ZOOM User Manual ver 2 www elationlighting com CONTENTS Fixture Overview Fixture Installation MaL pew 2 ARENA G7 ZOOM User Manual ver 2 www elationlighting com GENERAL INFORMATION INTRODUCTION Congratulations you have just purchased one of the most innovative and revolutionary new hybrid lighting fixtures on the market today The ARENA 7 ZOOM has been designed to perform reliably for years when the guidelines in this booklet are followed Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit These instructions contain important information regarding safety during use and maintenance UNPACKING Thank you for purchasing the ARENA Q7 ZOOM by Elation Professional Every ARENA Q7 ZOOM has been thoroughly tested and has been shipped in perfect operating condition Carefully check the shipping carton for damage that may have occurred during shipping If the carton appears to be damaged carefully insoect your unit for damage and be sure all accessories necessar2. 5 5 125 1 2 132 12 265 25 DIMENSIONAL DRAWINGS 15 3 388mm Ur SS yN 4 ee E H 5 8 mmm Si EAH 6 2 MMe f RG Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 23 ARENA Q7 ZOOM User Manual ver 2 www elationlighting com OPTIONAL ACCESSORIES ORDER CODE ITEM TRIGGER CLAMP Heavy Duty Wrap Around Hook Style Clamp 24 ARENA G7 ZOOM User Manual ver 2 Erariow www elationlighting com NOTES 25 ARENA G7 ZOOM User Manual ver 2
3. NOILV13 wWOOZ ZO VN3NV Jesn ELATION ARENA G7 ZOOM User manual www elationlighting com 2015 ELATION PROFESSIONAL all rights reserved Information specifications diagrams images and instructions herein are subject to change without notice ELATION PROFESSIONAL logo and identifying product names and numbers herein are trademarks of ELATION PROFESSIONAL Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged All non ELATION brands and product names are trademarks or registered trademarks of their respective companies ELATION PROFESSIONAL and all affiliated companies hereby disclaim any and all liabilities for property equipment building and electrical damages injuries to any persons and direct or indirect economic loss associated with the use or reliance of any information contained within this document and or as a result of the improper unsafe insufficient and negligent assembly installation rigging and operation of this product Elation Professional USA 6122 S Eastern Ave Los Angeles CA 90040 323 582 3322 323 832 9142 fax www elationlighting com Elation Professional B V Junostraat 2 6468 EW Kerkrade Netherlands
4. clearly written on the outside of the return package A brief description of the problem as well as the R A number must also be written down on a piece of paper and included in the shipping container If the unit is under warranty you must provide a copy of your proof of purchase invoice Items returned without a R A number clearly marked on the outside of the package will be refused and returned at customer s expense You may obtain a R A number by contacting customer support at 323 582 3322 IMPORTANT NOTICE There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures warranty Damages resulting from modifications to this fixture and or the disregard of safety and general user instructions found in this user manual void the manufactures warranty and are not subject any warranty claims and or repairs 5 ARENA Q7 ZOOM User Manual ver 2 EtATION www elationlighting com LIMITED WARRANTY A Elation Professional hereby warrants to the original purchaser Elation Professional amp products to be free of manufacturing defects in material and workmanship for a period of two years 730 days and Elation Professional amp product rechargeable batteries to be free of manufacturing defects in material and workmanship for a period of six months 180 days from the original date of purchase This warranty excludes discharge lamps and all product accesso
5. 15 minutes for the fixture cool down before replacing or serving 8 ARENA G7 ZOOM User Manual ver 2 www elationlighting com FIXTURE OVERVIEW 1 LCD Menu Function Display FUSE 5pin DMX IN OUT Safety Cable Attachment Points powerCON IN OUT 7 2 MENU UP DOWN ENTER Buttons 9 ARENA G7 ZOOM User Manual ver 2 www elationlighting com FIXTURE INSTALLATION FLAMMABLE MATERIAL WARNING Keep fixture at least 5 0 ff 1 5m away from any flammable materials decorations pyrotechnics etc ELECTRICAL CONNECTIONS A qualified electrician should be used for all electrical connections and or installations IS CAUTIONS e For added protection mount the fixture in areas outside walking paths seating areas or in areas were unauthorized personnel might reach the fixture e Maximum ambient operating temperature for this fixture is 104 F 40 C Do not use the fixture under or above this temperature e Maximum temperature of the external surface 185 F 85 C e Before mounting the fixture any surface make sure the installation area can hold a minimum point load of 10 times the weight of the fixture 132 Ibs 60 kg e Fixture installation must always be secured with a secondary safety attachment such as an appropriate safety cable e Never stand directly below the device when mounting removing or servicing er POWER LINKING Max number of units that can be power linked is
6. 15 units 120V 28 units 230V W A R N N G MINIMUM distance of inflammable materials from surface 1 6 feet 0 5m Keep fixture at least 5 0 feet 1 5m away from any flammable materials decorations pyrotechnics etc 10 ARENA G7 ZOOM User Manual ver 2 www elationlighting com MOUNTING POINTS e Overhead mounting requires extensive experience including amongst others calculating working load limits installation material being used and periodic safety inspection of all installation material and the device If you lack these qualifications do not attempt the installation yourself Improper installation can result in bodily injury e Fixture is fully operational in the specific mounting positions as illustrated below SS 7 7 i Fer SAFETY CABLE Always use a Safety Cable whenever installing this fixture in a suspended environment ensure the fixture will not drop if the clamp fails 1 ARENA G7 ZOOM User Manual ver 2 www elationlighting com CLAMP MOUNTING The ARENA G7 ZOOM includes an adjustable mounting yoke that attaches to both sides of the fixture When mounting this fixture to truss be sure secure an appropriately rated clamp to the mounting yoke using a M10 screw fitted through the center hole of the mounting yoke Be sure to attach a Safety Cable to the fixture using the safety cable rigging point on the back of the fixture as illustrated below SE
7. DMX addressing For example a fixture assigned a starting DMX address of 1 may be placed anywhere in the DMX chain at the beginning at the end or anywhere in the middle The DMX controller knows to send data assigned to address to that fixture no matter where it is located in the DMX chain The ARENA G7 ZOOM can be controlled via DMX 512 protocol and the DMX address is set via the control menu DATA CABLE DMX Cable REQUIREMENTS For DMX and Master Slave Operation Your fixture and your DMX controller require a standard 3pin or Spin XLR connector for data inout and data output see figure below If you are making your own cables be sure to use two conductor shielded digital DMX cable rated at 120 ohms this cable is designed for DMX transmission and may be purchased from your Elation dealer or at most professional lighting retailers Your cables should be made with a male and female XLR connector on either end of the cable Also remember that a DMX line must be daisy chained and cannot be split unless using an approved DMX splitter such as Elation s Opto Branch 4 Opto Branch 8 or DMX Branch 4 13 ARENA G7 ZOOM User Manual ver 2 www elationlighting com DMX Output DMX Input DMX Output DMX Input 3 Pin XLR Socket 3 Pin XLR Socket 5 Pin XLR Socket 5 Pin XLR Socket 1 Ground 1 Ground 2 Data o eo 2 Data o 60 3 Data 3 Data 4 Open 5 Open Be sure to follow the above figure when making your own
8. MENU button 3 seconds to access the menu options once again 17 ARENA Q7 ZOOM User Manual ver 2 ErATION www elationlighting com ELATION ARENA Q7 ZOOM MAIN MENU specifications are subject to change without any prior written notice OPTIONS VALUES DESCRIPTION 1 512 Set DMX Address 5Chan 6Chan 7Chan 9Chan 10Chan 15Chan 16Chan standard Theatre Architec TV Stage set Dimming Curve On Off Turn LCD Display Back Light On Off e 125 5 DMX Address Channel Mode Set DMX Channel Mode Dimmer Curve Black Out Back Light J Q White Balance Green 125 255 Set White Balance Blue 125 255 Red 0 5 Green 0 5 Blue 0 255 set Functions Manually White 0 255 Manual Color 0 255 Color Macros NOTE For Color Macros see DMX TRAITS for values ZOOM 0 255 Dimmer 0 5 Strobe 0 5 Auto Test Fixture Time Firmware Version D O Reset 18 ARENA Q7 ZOOM User Manual ver 2 www elationlighting com E ATION a DMX CHANNEL FUNCTIONS AND VALUES ELATION ARENA G7 ZOOM DMX Channel Values Functions VERSION 2 16 DMX Channels gt A vl 2 Ab v1 0 B v1 2 Bb v1 0 Software Version Be eAD oM 3 18 2015 specifications subject to change without any prior written notice VALUE FUNCTION E 0 255 Red 0 Black 255 100 Red RIN 0 255 Red FINE Adjustment GE Green 0 Black 255 100 Green GREEN FINE 0 255 Gre
9. and or dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall Elation Professional be liable for any loss and or damage direct and or consequential arising out of the use of and or the inability to use this product G This warranty is the only written warranty applicable to Elation Professional amp products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published 6 ARENA G7 ZOOM User Manual ver 2 EtATION www elationlighting com SAFETY INSTRUCTIONS The ARENA G7 ZOOM is an extremely sophisticated piece of electronic eguipment To guarantee a smooth operation it is mportant to follow the guidelines in this manual The manufacturer of this device will not accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual This device falls under PROTECTION CLASS 1 It s essential this device be grounded properly Only qualified personnel should perform all electrical connections C A U T O N S KEEP THIS FIXTURE AWAY FROM RAIN AND MOISTURE UNPLUG POWER BEFORE SERVICING FIXTURE NEVER TOUCH FIXTURE DURING OPERATION IT MAY BE HOT NEVER LOOK DIRECTLY INTO THE LIGHT SOURCE SENSITIVE PERSONS MAY SUFFER AN EPILETIC SHOCK e proper operation follow the Installation guidelines described in this manual Only qua
10. CURING Regardless of the rigging option you choose for your ARENA Q7 ZOOM always be sure to secure your fixture with a safety cable The fixture provides a built in rigging point for a safety cable on the back of the fixture as illustrated below Be sure to only use the designated rigging point for the safety cable 12 ARENA Q7 ZOOM User Manual ver 2 www elationlighting com UNDERSTANDING DMX DMX 512 DMX is short for Digital Multiplex This is a universal protocol used by most lighting and controller manufactures as a form of communication between intelligent fixtures and controllers DMX allows all makes and models of different manufactures to be linked together and operate from a single controller This is possible as long as all the fixtures and the controller are DMX compliant A DMX controller sends the DMX data instructions to the fixture allowing the user to control the different aspects of an intelligent light DMX data is sent out as serial data that travels from fixture to fixture via data IN and data OUT XLR terminals located on the fixtures most controllers will only have output jacks DMX LINKING To ensure proper DMX data transmission always use proper DMX cables and a terminator When using several DMX fixtures try to use the shortest cable path possible Never split a DMX line with a style connector The order in which the fixtures are connected in a DMX line does not influence the
11. amp and will decrease gradually over time This fixture is a professional lighting effect designed for INDOOR DRY LOCATIONS ONLY on stage in nightclubs theatres etc Please make sure there are NO FLAMMABLE MATERIALS close to the fixture while operating to prevent any fire hazard Minimum distance of inflammable materials from the surface 1 6 feet 0 5m Maximum temp of the external surface 185 F 85 C The fixture must be installed in a location with adequate ventilation at least 0 6 15cm from adjacent surfaces Be sure no air ventilation slots are blocked DO NOT attempt installation and or operation without knowledge how to do so DO NOT allow operation by persons who are not qualified to operate this type of fixture Most damages are the result of operations by nonprofessionals Consistent operational breaks may ensure the fixture will function properly for many years come DO NOT shake fixture avoid brute force when installing and or operating fixture Always install the fixture with an appropriate safety cable When installing the fixture in a suspended environment always use mounting hardware that is no less than M10 x 25 mm also be sure the hardware is insert in the pre arranged screw holes in the bracket of the fixture Use the original packaging and materials to transport the fixture in for service DO NOT TOUCH the housing bare hand during its operation Turn OFF the power and allow approximately
12. back of the fixture You can set the same starting address for all fixtures or a group of fixtures or set different address for each individual fixture Be advised that setting all fixtures to the same DMX address will subsequently control all fixtures in the same fashion in other words changing the settings of one channel will affect all the fixtures simultaneously If you set each fixture a different DMX address each unit will start to listen to the channel number you have set based on the quantity of control channels DMX channels of each fixture That means changing the settings of one channel will only affect the selected fixture In the case of the ARENA Q7 ZOOM M when in the 16 Channel Mode you should set the starting DMX address of the first unit 1 the second unit 17 1 16 the third unit to 33 17 16 the forth unit 49 33 16 and so on Note During start up the ARENA G7 ZOOM will automatically detect whether a DMX data signal is being received or not If your fixture is connected a DMX controller and it is not receiving a DMX signal please check the following The Spin XLR input plug cable with DMX signal from controller is not connected or is not inserted completely into the DMX input jack of the fixture The DMX controller is switched off or defective The DMX cable or connector is defective A DMX terminator has been inserted into the last fixture in y
13. cables Do not use the ground lug on the XLR connector Do not connect the cable s shield conductor to the ground lug or allow the shield conductor to come in contact with the XLR outer casing Grounding the shield could cause a short circuit and erratic behavior DMX 512 CONTROLLER CONNECTION Connect the provided XLR cable to the female XLR output of your controller and the other side to the male XLR input of the ARENA Q7 ZOOM The diagram below illustrates a typical DMX 512 connection when the fixture is in the 16 Channel Mode You can chain multiple panels together through serial linking The cable that should be used is two conductor shielded DMX cable with XLR and output connectors Always be sure daisy chain your in and out data connections never split or Y your DMX connections unless you are using an approved DMX splitter such as Elation s Opto Branch 4 Opto Branch 8 or DMX Branch 4 Address 17 Address 33 Address 49 DMX 512 CONNECTION WITH DMX TERMINATOR A DMX terminator should be used in all DMX lines especially in longer runs The use of a terminator may avoid erratic behavior in your DMX line A terminator is a 120 ohm 1 4 watt resistor that is connected between pins 2 and 3 of a male XLR connector DATA and DATA This fixture is inserted in the female XLR connector of the last fixture in your daisy chain to terminate the line Using a line terminator will decrease the possibilities of e
14. en FINE Adjustment BLUE 0 255 Blue 0 Black 255 100 Blue BLUE FINE 0 255 Blue FINE Adjustment WHITE 0 255 White 0 Black 255 100 White White FINE Adjustment COLOR MACROS P 0 255 P 125 128 19 ARENA G7 ZOOM User Manual ver 2 2 3 4 5 7 MODE CHANNEL 6 7 9 10 15 i6 Le ErATION www elationlighting com ELATION ARENA Q7 ZOOM DMX Channel Values Functions VERSION 2 16 DMX Channels Dorog D eM 3 18 2015 Software Version gt Ai v1 2 Ab v1 0 gt B v1 2 Bo v1 0 Specifications subject to change without any prior written notice E eee ti aaa CHANNEL rrr DIMMER INTENSITY Intensity 0 to 100 m r e DIMMER INTENSITY FINE 0 255 Dimmer Intensity FINE Adjustment GE SHUTTER STROBE 7 2 12 ED ON COLOR TEMPERATURE 0 255 0 7 200K 100 3 200K E ZOOM FINE Curves 8 8 81 100 20 ARENA Q7 ZOOM User Manual ver 2 www elationlighting com CLEANING AND MAINTENANCE C A U T O N Disconnect power before cleaning or maintenance CLEANING Frequent cleaning is recommended to insure proper function optimized light output and an extended life The frequency of cleaning depends on the environment in which the fixture operates damp smoky or particularly dirty environments can cause greater accumulati
15. lified and certified personnel should perform installation of this fixture and only the original rigging parts brackets included with this fixture should be used for installation Any modifications will void the original manufactures warranty and increase the risk of damage and or personal injury e Never look directly into the light source of this fixture to prevent risk of injury to your retina which may induce blindness Those suffering from EPILEPSY should avoid looking directly into the light source of this unit at all times e The fan and air inlets must remain clean and never blocked Allow approx 6 15cm between this fixture and other devices or a wall for proper cooling e Always disconnect from main power source before performing any type of service and or cleaning procedure Only handle the power cord by the plug end never pull out the plug by tugging the wire portion of the cord e Do not operate this fixture if the power cord has become frayed crimped and or damaged If the power cord is damaged replace it immediately with a new one of similar power rating 7 ARENA Q7 ZOOM User Manual ver 2 www elationlighting com GENERAL GUIDELINES NEVER OPEN THIS FIXTURE WHILE IN USE During the initial operation of this fixture a light smoke or smell may emit from the interior of the fixture This is a normal process and is caused by excess paint in the interior of the casing burning off from the heat associated with the l
16. on of dirt on the fixture s optics e Clean the external lens surface at least every 20 days with a soft cloth to avoid dirt debris accumulation Never use alcohol solvents or ammonia based cleaners MAINTENANCE Regular inspections are recommended insure proper function and extended life There are no user serviceable parts inside this fixture please refer all other service issues an authorized Elation service technician Should you need any spare parts please order genuine parts from your local Elation dealer Please refer to the following points during routine inspections e A detailed electric check by an approved electrical engineer every 3 months make sure the circuit contacts are in good condition and prevent overheating e Be sure all screws and fasteners are securely tightened at all times Lose screws may fall out during normal operation resulting in damage or injury e Check for any deformations on the housing color lenses rigging hardware and rigging points ceiling susoension trussing Deformations in the housing could allow for dust to enter into the fixture Damaged rigging points or unsecured rigging could cause the fixture to fall and seriously injure a person s e Inspect all moving parts and make sure there are no signs of wear and rotate move without imbalances e Electric power supply cables must not show any damage material fatigue or sediments Never remove the ground prong from the po
17. our DMX chain 16 ARENA G7 ZOOM User Manual ver 2 www elationlighting com FIXTURE MENU ON BOARD SYSTEM MENU The ARENA G7 ZOOM comes with an easy navigate system menu The next section will detail the functions of each command in the system menu LCD MENU CONTROL PANEL The control panel see image below located on back of the fixture allows you to access the main menu and make all necessary adjustments to the ARENA 7 ZOOM During normal operation pressing MENU button once will access the fixture s main menu Once in the main menu you can navigate through the different functions and access the sub menus with the UP and DOWN buttons Once you reach a field that reguires adjusting press the ENTER button to activate that field and use the UP and DOWN buttons adjust the field Pressing the ENTER button once more will confirm your setting You may exit the main menu at any time without making any adjustments by pressing and holding the MENU button for 3 seconds MENU A ENTER MENU UP DOWN ENTER 0060 0 Some units may have the MENU control buttons silkscreened as pictured above LEFT and some units may have them as pictured above RIGHT The control buttons on both versions function in the exact same order MENU UP DOWN ENTER The MENU display will lock when NO buttons are pressed for 30 seconds When the display locks none of the control panel buttons will respond To unlock the display press and hold the
18. ries This warranty shall be valid only if the product is purchased within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought B For warranty service send the product only to the Elation Professional factory All shipping charges must be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty Elation Professional will pay return shipping charges only to a designated point within the United States any product is sent it must be shipped in its original package and packaging material No accessories should be shipped with the product If any accessories are shioped with the product Elation Professional shall have no liability what so ever for loss and or or damage to any such accessories nor for the safe return thereof C This warranty is void if the product serial number and or labels are altered or removed if the product is modified in any manner which Elation Professional concludes after inspection affects the reliability of the product if the product has been repaired or serviced by anyone other than the Elation Professional factory unless prior written authorization was issued to purchaser by Elation Professional if the product is damaged because not properly maintained as set forth in the product instructions guideline
19. rratic behavior 14 ARENA Q7 ZOOM User Manual ver 2 www elationlighting com Termination reduces signal errors and oN avoids signal transmission problems tii and interference It is always advisable to connect a DMX terminal Resistance 120 Ohm 1 4 W between PIN 2 DMX 999 and PIN 3 DMX of the last fixture 5pin XLR DMX CONNECTORS some manufactures use 5pin XLR connectors for DATA transmission in place of 3pin Spin XLR fixtures may be implemented in a 3pin XLR DMX line When inserting standard 5pin XLR connectors in a 3pin line a cable adaptor must be used these adaptors are readily available at most electric stores The following chart details a proper cable conversion 3 Pin XLR to 5 Pin XLR Conversion Conductor 3 Pin XLR Female Out _ 5 Pin XLR Male In Data Compliment signal Pin 2 Data True signal Pin 3 Not Used Pin 4 Do Not Use Not Used Pin 5 Do Not Use 15 ARENA Q7 ZOOM User Manual ver 2 www elationlighting com DMX ADDRESSING All fixtures should be given a DMX starting address when using a DMX controller so the correct fixture responds to the correct control signal This digital starting address is the channel number from which the fixture starts to listen to the digital control information sent out from the DMX controller The allocation of this starting DMX address is achieved by setting the correct DMX address on the digital display located on the
20. s and or user manual D This is not a service contract and this warranty does not include any maintenance cleaning or periodic check up During the periods as specified above Elation Professional amp will replace defective parts at its expense and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship The sole responsibility of Elation Professional under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of Elation Professional All products covered by this warranty were manufactured after January 1 1990 and bare identifying marks to that effect Elation Professional reserves the right to make changes in design and or performance improvements upon its products without any obligation to include these changes in any products theretofore manufactured No warranty whether expressed or implied is given or made with respect to any accessory supplied with the products described above Except to the extent prohibited by applicable law all implied warranties made by Elation Professional amp in connection with this product including warranties of merchantability or fitness are limited in duration to the warranty periods set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said periods have expired The consumer s
21. wer cable 2 ARENA G7 ZOOM User Manual ver 2 Erariow www elationlighting com TECHNICAL SPECIFICATIONS FEATURES Motorized 10 60 Zoom selectable Dimming Curves amp Color Temperatures 3200K 7200K Flicker Free Operation for TV and FILM SOURCE 7x 10W Osram QUAD Color RGBW LEDs 50 000 Hour Average Life EFFECTS 64 Color Macros strobe Variable Strobe Macros Electronic Dimming and Variable Dimming Curves COLOR RGBW CONTROL CONNECTIONS 7 DMX Channel Modes 5 6 7 9 10 15 16 5pin DMX In Out 4 Button Control Panel LCD Menu Display powerCON Power In Out Power Link Up To 15 Units at 120V 28 Units at 230V SIZE WEIGHT Length 15 3 388mm Width 7 5 190mm Vertical Height 7 1 180mm Weight 13 2 lbs 6 0kg ELECTRICAL THERMAL AC 100 240V 50 60Hz 95W Max Power Consumption Max Ambient Temperature 04 F 40 C APPROVALS RATINGS CE IP20 INSTALLATION Rigging Dual Yoke Floor Stand Working Position Any 360 Please Note Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 22 ARENA Q7 ZOOM User Manual ver 2 EtATION www elationlighting com PHOTOMETRIC DATA 10 Beam 1 2m 3m po 10 MIN ZOOM 60 Beam Im 2m 4 4m 5m 60 MAX ZOOM m ft m ft m ft m ft m ft Distance 1 33 Photometrics lux fc lux fc lux fc lux fc lux fc
22. y to operate the unit have arrived intact In the event damage has been found or parts are missing please contact our customer support team for further instructions Please do not return this unit to your dealer without first contacting customer support at the number listed below Please dlo not discard the shipping carton in the trash Please recycle whenever possible BOX CONTENTS e 1 powerCON Cable e Manual amp Warranty Card 4 ARENA Q7 ZOOM User Manual ver 2 www elationlighting com CUSTOMER SUPPORT Elation Professionale provides a customer support line to provide set up help and answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www elationlighting com for any comments or suggestions For service related issue please contact Elation Professional ELATION SERVICE USA Monday Friday 8 00am to 5 00pm PST Voice 323 582 3322 Fax 323 832 9142 E mail support elationlighting com ELATION SERVICE EUROPE Monday Friday 08 30 to 17 00 CET Voice 31 45 546 85 30 Fax 31 45 546 85 96 E mail support elationlighting eu WARRANTY REGISTRATION Please complete and mail in the enclosed warranty card or register online http www elationlighting com Login dsox to validate your purchase All returned service items whether under warranty or not must be freight pre paid and accompany a return authorization R A number The R A number must be
Download Pdf Manuals
Related Search