Home

User Manual User Manual

image

Contents

1. damaged in any way 9 Do not use outdoors 10 Do not place on or near a hot gas or electric burner 11 Attach plug to appliance first then plug electrical cord into the wall outlet 12 Disconnect the unit by turning the power switch to OFF then removing the electrical plug from the wall outlet 13 Do not use appliance for any application other than intended use 14 Do not insert metal utensils or oversized foods into this unit as they may cause a fire and heighten the risk of electrical shock 15 Do not store any item on top of this unit when in operation 16 Do not allow this dehydrator to touch or be covered by flammable material such as curtains draperies walls etc when in operation 17 Do not clean with metal scouring pads as pieces can break off and touch electrical components heightening the risk of electrical shock 18 Never place materials such as paper cardboard plastic etc in this dehydrator 19 Do not cover interior of this unit with metal foil as it may cause the dehydrator to overheat 20 Avoid scratching the surface or nicking the edges of this unit Do not put sharp articles beyond the net interior it may choke the fan and cause product failure 21 Note that the use of accessories not recommended by the manufacturer may result in injury 22 Children should be supervised to ensure that they do not play with the dehydrator 23 Place unit on a flat surface that is well ventilated NOTE Save
2. AVANTCO User Manual Commercial Food Dehydrator CC 08 2015 Model CFD10 Please read and keep these instructions Indoor use only www AvantcoEquipment com 1 User Manual AVANTCO Index Important Safety Information 0 00 cece ees 3 Identification of Key Parts 000 ee 4 Before Using Your Dehydrator cece eee eens 5 Using Your Dehydrator 0 00 e eee ees 5 Typical Operation Sequence 00 cee eee eee eee 6 lu EE 6 Temperature Control Knob 0000 cee eee 6 Dehydrating TipS es ae NENT eee ete ENEE oe ee eee ee es 7 Cleaning and Maintaining Your Dehydrator 7 MPCCIICAIONS 26 006e04de andes EE dee tna ka awe 7 Parts E 8 KA Diagrami 04 044 EN dane SEELEN RE REN anes 9 Troubleshooting 2225220 fe er e Ae eler 9 Limited Warranty de de E er geg va es 10 2 www AvantcoEquipment com EQUIPMENT VANTCO User Manual IMPORTANT SAFETY INFORMATION Read all instructions carefully and completely For commercial use only Do not touch hot surfaces AONT Protect against electrical shock by keeping all cords plugs and other electrical components away from water or other liquids 5 Unplug this unit when not in use and before cleaning 6 Allow the unit to cool before putting on or taking off parts 7 Do not operate this or any appliance with a damaged electrical cord or plug 8 Do not operate this or any appliance after it has malfunctioned or been
3. er mer Jee io firemosanoanorae Left Rack Assembly 177PCFDP18 8 www AvantcoEquipment com AVANTCO User Manual Circuit Diagram SI Heater N PEL Troubleshooting Problem The dehydrator does not work after being switched on e Make sure the dehydrator is plugged in e Be sure that the timer is set e Be sure that the temperature control knob is set Problem The dehydrator does not work after being switched on e Do not attempt to dismantle the dehydrator e Contact your service agent right away to examine the fan Problem Food is often over dried or not dried even when operating according to the recipe e Check that the fan motor is operating normally e Contact your service agent to examine the temperature control knob www AvantcoEquipment com 9 EQUIPMENT User Manual VANTCO Limited Warranty All equipment sold under the Avantco trademark and used for commercial purpose is warranted against defects in materials and workmanship The warranty runs for six months from the date of original installation and is for the benefit of the original purchaser only All other warranties Expressed or Implied Statutory or otherwise including Without Limitation and any implied warranty of Merchantability or Fitness for Purposes are excluded The seller shall in no event be liable for direct indirect or consequential damages in connection with Avantco commercial products This warrant
4. he thermostat dial to set a desired temperature and the heating element will begin heating CAUTION During the dehydrating process make sure that no metal accessory comes in contact with the electrical fan and heating elements CAUTION Foods dehydrated in this unit will be hot Wear protective hand coverings when reaching into dehydrator to retrieve food www AvantcoEquipment com 5 User Manual AYANTOO Typical Operation Seguence ACTION RESULT Power is connected and power light will go Plug in your dehydrator on after turning the power switch ON The power light will turn on and the unit will Flip power switch to ON be ready to operate Turn diam to ON Convection fan will begin circulating air Turn thermostat dial to ON Heating element will begin heating the unit Timer indicates that products have finished Timer reaches zero drying Product will be dehydrated hot use caution KEE SE removing it from the dehydrator Timer The timer has a range of 0 to 12 hours If you need to reset the dehydrating time while the dehydrator is in operation simply turn the timer to a new position The dehydrator will reset the time according to the revised requirement without needing to be turned off When the set dehydrating time has been reached the unit will alert you and the heating elements fan will shut off Temperature Control Knob The temperature range of this unit is 85 160 degrees Fahrenheit o
5. n 120V models This thermostatic switch controls the temperature inside the dehydrator and helps to maintain the proper temperature during various dehydrating applications 6 www AvantcoEquipment com EQUIPMENT VANTCO User Manual Dehydrating Tips e Use different temperatures for different foods and use the best quality foods e Fruits and vegetables in peak season have more nutrients and flavor Do not use foods with bruises or blemishes e Meats should be lean and fresh Remove as much fat as possible before dehydrating e Do not overlap foods Lay foods out flat on the trays e Check the dryness after a few hours and then check every two hours until dehydration is complete Cut down the center of a few samples to check internal dryness If there is moisture dehydrate longer Cleaning amp Maintaining Your Dehydrator Turn unit off and wait for it to cool Unplug the cord from the wall Clean and sanitize rack supports rack and door Wipe and clean the interior of the unit using warm water and a damp cloth or sponge Reassemble when dry and store a A Q N Specifications MODEL POWERSUPPLY DIMENSIONS UNIT WEIGHT SIZE PLUG 16 W x 17 D x 28 Ibs CFD10 120V 60HZ 1000W 20 H 10 Racks NEMA 5 15P www AvantcoEquipment com 7 EQUIPMENT User Manual VANTCO Parts List Part Name Specification ie o few Part Name Specification AC baren Jl o frens bes E 1 Co femp
6. these instructions for future reference www AvantcoEquipment com 3 User Manual AVANTCO Identification of Key Parts Cno fen NH en DEER Power Switch Timer Thermostat 4 Body 5 Power cord Foot Food Rack Door handle 4 www AvantcoEquipment com EQUIPMENT VANTCO User Manual Before Using Your Dehydrator Before drying anything in your dehydrator for the first time please follow these simple instructions 1 Remove from box 2 Remove rack supports door and stainless steel racks tape will be holding them in 3 Using a small amount of detergent was the handle and food racks with soapy water NOTE Do not use a spray or abrasive polishing agent 4 Wipe down interior with a damp cloth While washing this unit do not touch the electrical heating element and fan Do not soak the inside of the dehydrator with water 5 After washing and drying re assemble the unit 6 Plug in and turn it to its highest temperature setting for 5 minutes 7 Turn off the heating elements and open the dehydrator front panel in order to remove any smoky residue from inside the dehydrator The heating elements are well lubricated and this initial use will help burn off the extra grease A light amount of smoke is normal during this process Using Your Dehydrator To start your dehydrator turn the power switch on To set a time turn on the timer and this will cause the fan to start working Turn on t
7. y is not effective if damage occurs due to accident carelessness improper installation lack of proper set up Supervision when required or if the equipment is installed or operated in any manner contrary to the installation and operating instructions Work performed by unauthorized personnel or unauthorized service agencies voids this warranty This warranty does not apply to and Avantco is not responsible for any warranty claims made on products sold or used outside of the United States Residential use voids the warranty 10 www AvantcoEquipment com

Download Pdf Manuals

image

Related Search

Related Contents

Harbor Freight Tools 165 Amp_DC, 240 Volt, Inverter TIG/Stick Welder Product manual    Freedom™ Par Quad-4 IP User Manual Rev. 1  Conso et dev durable..  取扱説明書  Savon Zestra O04  Installation User and Service Manual Release R.1.0 Uk  molegro virtual docker  Mode d`emploi Balances Spider 1S METTLER TOLEDO  HB3344-02 GUIA DE CAMPO para TUFFTM  

Copyright © All rights reserved.
Failed to retrieve file