Home
Rechargeable Li-ion Battery Pack
Contents
1. SWIT Rechargeable Li ion Battery Pack USER MANUAL SWIT Electronics Co Ltd Tel 86 25 85805753 Fax 86 25 85805296 http www swit cc E mail contact swit cc Characteristics 1 High performance Li ion battery pack rechargeable 2 4 step LED power indicator 3 D tap DC output and charging socket except S 8056N 4 Build in multiple protective circuit design Caution 1 Never attempt to open the battery pack Use SWIT charger or the chargers recommended by SWIT Keep the battery pack terminals clean Never short circuit the battery pack terminals Never expose the battery pack to rain fire or moisture Never expose the battery pack to temperature above 60 C Avoid strong mechanical shock The battery pack may become warm in use or while being charged This is normal ONOOaKR WDM Charging 1 The battery pack is not fully charged when it is purchased Charge the battery before use 2 Use SWIT charger or the chargers recommended by SWIT 3 The battery pack should be charged within a temperature range of 0 40 C Discharging 1 Fully charged battery pack will discharge naturally and please use it as soon as it gets charged 2 At low temperature the running time of battery pack usually decreases 3 The internal impedance of battery pack will be greater at low temperature which may cause the automatically circuit cutting 4 According to the using conditions please set the ca
2. Gold Mount 14 4V 95Wh 6 6Ah 50W 3 5A 134x88x54mm 800g S 8082S V mount 14 4V 95Wh 6 6Ah 50W 3 5A 134x88x52mm 800g S 8110A Gold Mount 14 4V 126Wh 8 8Ah 100W 8A 165x90x53mm 900g S 8110S V mount 14 4V 126Wh 8 8Ah 100W 8A 165x90x51mm 900g S 8160A Gold Mount 14 4V 190Wh 13 2Ah 100W 8A 165x90x68mm 1300g S 8160S V mount 14 4V 190Wh 13 2Ah 100W 8A 165x90x66mm 1300g S 8180A Gold Mount 14 4V 220Wh 15 3Ah 140W 12A 165x90x68mm 1300g S 8180S V mount 14 4V 220Wh 15 3Ah 140W 12A 165x90x66mm 1300g S 8056N NP 1 14 4V 73Wh 5 1Ah 50W 3 5A 185x72x25mm 690g
3. mera low battery warning voltage at 13 14V cut off voltage at 12 13V LED indicator 1 The four step LEDs indicate the remaining capacity when press the CHECK button 2 The indicator may not be accurate when the battery is powering on the camera 3 When only one LED indicates please charge the battery as soon as possible DC socket The D tap DC socket can be used as 14 4V DC output or SWIT S 3010B charging input 1 Open the rubber cover and plug in D tap lead to DC output or charge 2 Close the rubber cover when disconnected to keep the socket away from dust Remark The NP 1 battery S 8056N does not have DC socket Self protection and Re activate 1 The battery pack has multiple protective circuits and will cut off power automatically when overload or any abnormal detected 2 If it s in normal environment temperature please lay the battery pack aside for 3 5 minutes and mount the battery pack to any SWIT charger it will be re activated and get charging normally 3 If the environment temperature is high please lay the battery pack aside for 20 30 minutes and then charge the battery by SWIT chargers to active Storage Please keep in cool dry and clean place Specifications Model Mount Type Nominal voltage Capacity Max output Dimension Mass S 8080A Gold Mount 14 4V 95Wh 6 6Ah 50W 3 5A 165x90x51mm 800g S 8080S V mount 14 4V 95Wh 6 6Ah 50W 3 5A 165x90x49mm 800g S 8082A
Download Pdf Manuals
Related Search
Related Contents
Acotint - Mastic Pinturas Barreira imaterial de segurança tipo 4 Atmel SAM D21 Xplained Pro (USER GUIDE) Handleiding Birth Alarm GSM Copyright © All rights reserved.
Failed to retrieve file