1 *****SELO HOME DESIGNS***** *****SELO TOWER
Contents
1. Now click on REPORT STATUS You should see the following in local chat window 06 10 Controller Lobby Apts 1 12 Door 1 count 2 06 10 Controller Lobby Apts 1 12 Door 2 count 2 06 10 Controller Lobby Apts 1 12 Light 1 count 2 06 10 Controller Lobby Apts 1 12 Light 2 count 4 06 10 Controller Lobby Apts 1 12 Tp 1 count 13 06 10 Controller Lobby Apts 1 12 Fan 1 count 1 C Now you must to do the same at each apartment by going to them using the TPs Click UPDATE SYSTEM on the control panel on the wall Wait until it checks all the devices at the apartment 06 11 Controller Apt 1 Preparing to poll devices 06 11 Controller Apt 1 Polling devices please wait until timer expires in 20 seconds 06 11 O2 Sim status the omega concern is now UP Updated Posted Jan 3 2012 06 11 Controller Apt 1 Polling complete controller ready Now click on REPORT STATUS on the central contoller You should see the following in local chat window 06 12 Controller Apt 1 Door 1 count 1 06 12 Controller Apt 1 Light 1 count 1 06 12 Controller Apt 1 Security 1 count 1 Now you can use all the functions of that apartment right 6 CENTRAL HOME CONTROL SYSTEM have used my own Home Control System SELO HOME CONTROL SYSTEM in this tower The home control panels are on the wall at the apartments The ones in the lobby are on the wall to the left and right as you enter the lobby through the fro2. 11 When you rez the tower if some parts do not go to their places right just move the rez box up and down or left and right slightly they will go to their places If you are rezzing the tower on the SIM edge some parts may not rez or some parts may be returned to your Lost and Found folder by the SIM would recommend you rez the tower as far from the edge of the SIM as possible and the drag it to its parcel TIP 12 My buildings are sold COPY MOD and no transfer the scripts are COPY only If for some reason have sold any part of the tower or the scripts as COPY MOD TRANS by mistake this would never give you the right to sell them or give them away to anyone at all Just use them for yourself please If you let me know on that will correct the perms too P S 1 am also the owner of SELO RENTALS Ashmore Island and I rent out beautiful private houses and apartments on the ground and in sky Please feel free to stop by and check my SIM if you also need a rental home P S 2 would highly recommend you to use this tower on your own land and not on someone else s land or on Group owned land to minimize the problems while setting up or using the tower would 7 Updated Posted Jan 3 2012 not provide support for any of my builds used on Group land you can use them at your own risk The radio must be deeded to the Group on Group owned land so it can work right Please feel free to contact me if you need any help with this b
3. ATIONS The apartments have two rooms but sometimes the renters want a separate room to be added to their apartment Then carefully unlink a door a window a light and a wall make copies of them and make a room When you add a door light and or a window make sure they have the same ID_Number as the ID_Number of the apartment you are adding them to If you want to change the textures any seamless textures will work fine on walls floors and ceilings See USEFUL TIPS 2 below for unlinking a prim 21 SUPPORT You can get support for my buildings indefinitely for free Future updates will be delivered to you for free If Marketplace or my rez vendors fail to deliver the item you buy send me an IM inworld or an e mail to selo wozniak live com with the number and date of the purchase and will redeliver the product to you directly All sales are final as this is a copy mod building and no money will be refunded unless multiple purchases are made for the same building by accident SELO HOME DESIGNS may offer support for any modifications you may want to make on the purchased building In case of any texture loss malfunctioning of scripts because of unlinking components root prims or any other malfunction due to manipulation will not be repaired by SHD Please rezz a fresh copy of your SHD prefab in case you can t fix the error you caused 22 USEFUL TIPS TIP 1 After you have rezzed the tower and saved it take some values for future
4. Updated Posted Jan 3 2012 SELO TOWER 22 v1 0 UNFURNISHED 22 SINGLE STOREY APARTMENTS 334 PRIMS Each apt is 15 prims 31x31m 961sqm 93 x93 8 649sqf GRASSY YARD 60x60m A SPACIOUS LOBBY amp A RECEPTION DESK COPY MOD NO TRANS Scripts are Copy only TOWER HEIGHT 157m 471 LOCKING DOORS SECURITY ORB LIGHTS PRIM COUNTER CENTRAL HOME CONTROLLER LIGHTS CEILING FAN FIREPLACE GRASSY YARD SLIDING GATES SCRIPTED WELCOME MAT GARDEN LAMPS TEXTURE CHANGING FLOWERS OVER 40 FLOWERS SELO HOME DESIGNS SINCE 2008 T CIMT SELO HOME DESIGNS SELO TOWER 22 v1 0 UNFURNISHED USER S MANUAL CONTENTS OF THE USER S MANUAL 1 GENERAL 12 WINDOWS 2 SPECIFICATIONS 13 TELEPORTERS 3 QUICK START REFERENCE GUIDE 14 RADIO 4 REZZING 15 CEILING FAN 5 UPDATING THE HOME CONTROL 16 FIREPLACE SYSTEM 17 WELCOME MATS 6 CENTRAL HOME CONTROL SYSTEM 18 LOBBY AREA 7 AVATAR KEY UUID FINDER 19 GRASSY PLATFORM 8 PRIM COUNTER 20 MODIFICATIONS 9 SECURITY ORB 21 SUPPORT 10 LIGHTS 22 USEFUL TIPS 11 DOORS 1 GENERAL Hello and thank you for your purchase This is a 21 floor residential tower that has a lobby and a grassy yard Each apartment is single storey Apartments have central home control systems that control the prim counters security orbs lights and the doors The lobby can be used as an office by you or by your manager or
5. aming IMPORTANT If you don t reset teleporters and UPDATE SYSTEMs as explained above the TPs may not function properly 5 UPDATING THE HOME CONTROL SYSTEM A Click UPDATE SYSTEM on the central control panel for Apts 13 22 on the panel to the left in the lobby Wait until it checks all devices 06 08 Controller Lobby Apt 13 22 Roof Preparing to poll devices 06 08 Controller Lobby Apt 13 22 Roof Polling devices please wait until timer expires in 20 seconds 06 08 Controller Lobby Apt 13 22 Roof Polling complete controller ready Now click on REPORT STATUS You should see the following in local chat window 06 08 Controller Lobby Apt 13 22 Roof Tp 1 count 12 If you see all those devices as shown above then you can start using the lobby and the teleporters to the apartments 1 12 If the SIM is laggy and you don t see all those devices there as shown above then increase the polling delay on the config notecard inside the Controller as shown below or even to a higher value Polling Delay 20 gt gt gt gt gt Polling Delay 40 B Now click UPDATE SYSTEM on the central control panel for Apts 1 12 on the panel to the right in the lobby Wait until it checks all devices 06 09 Controller Lobby Apts 1 12 Preparing to poll devices 06 09 Controller Lobby Apts 1 12 Polling devices please wait until timer expires in 20 seconds 06 09 Controller Lobby Apts 1 12 Polling complete controller ready
6. cards inside the lights DOORS Apartment doors are sliding doors and they are linked to the building When you walk to them they will open automatically and they will auto close after 5 seconds There are 4 different beautiful door textures to choose from and you can change the door textures as explained below Click on the door and keep it clicked for 15 20 seconds depending on how laggy the SIM is at that time and release You will see the menu Just try a different texture on inner outer edge surfaces After you have finished remember to click DONE You can add your own door textures up to 11 textures Using doors via the Controller Click on DOOR on the Controller 1 Lock or Unlock the door 12 13 14 WINDOWS Windows are clear on the inside but they are solid Windows on the outside for privacy TELEPORTERS Click on any TP pad and choose your destination on the menu that will pop up There are 25 TP pads at the tower One at each 22 apartments 1 on the roof and 2 in the lobby RADIO The only radio is located on the wall to the left as you enter the lobby through the front doors Click on the radio and choose a station URL from the menu that will pop up You can add a radio station URL into the radio by adding your URL onto the Channels notecard as shown below Slow Radio http streams slowradio com mp3 128 The radio must be deeded to the Group on Group owned land so it can work right It does not ma
7. ick Save 2 Go to fly to every teleporter at the apartments on the roof and in the lobby and reset all the teleporters 3 Goto the lobby click UPDATE SYSTEM on the controller panel 4 Goto each apartment click UPDATE SYSTEM on the controllers on the walls 5 Also make sure you replace the information on the config notecards in the controllers with yours your name e mail address UUID number prim quotas 6 Now you can use all the functions of the apartments amp the tower right 7 The detailed information on the use of the tower is given below 4 REZZING Updated Posted Jan 3 2012 The tower comes in a Rez Faux package so it is very simple to rez the tower Place the rez box on the edge of your parcel with FRONT side facing you and move it up about half a meter 2 from the ground Click on it The rez menu will appear Right click on the rez box and go to Edit mode Please fly up before you rez the tower to prevent getting kicked by rezzing tower parts especially if you are rezzing it in sky Now click Rez on the menu and wait until all parts are rezzed properly It will rez behind the rez box Place the tower to its final location by dragging the rez box the rezzed tower will follow it When you are happy with the location click Save or Store on the menu would recommend you to rez the tower on a separate parcel and not with any other buildings on the same parcel so it would have its own media TV and radio stre
8. ke any sense to place multiple radios on one parcel and it will only cause confusion 15 16 17 CEILING FAN There is a ceiling fan in the lobby Click on the ceiling fan to get the menu It has Gentle Slow Medium Fast speed levels to start the fan You can also turn it off Please NEVER link ceiling fans to the building If you add a ceiling fan to the apartments please change the ID_ NUMBER of the ceiling fan with the one of the apartment it is being installed at FIREPLACE There is a nice low prim fireplace in the lobby 6 prims only Just click on the fire logs to turn it on or off You may want to make copies and place one of it at each apt too WELCOME MATS Updated Posted Jan 3 2012 There is a scripted welcome mat at the front doorstep of the lobby You can change the texture by clicking on them and selecting Next or Previous buttons from the menu that will pop up There are 8 different welcome mat textures to choose from You may also want to make copies and place one of it at each apartment 18 LOBBY AREA This is a large area where you can place an office your ads vendors LM or notecard givers notice boards etc The lobby has double sliding doors at front There is a TV stand for you to place your Tower TV on as well 19 GRASSY PLATFORM The tower is sitting on a 60X60m grassy platform The platform has a set of palm trees 3 sea trees a pine tree and a pink tree There is also a garden bench 20 MODIFIC
9. nt doors You can control the devices by directly clicking on them or you can use the Central Home Control System panel You must edit update each notecard before you use an apartment by entering your own information Open the config notecards in the controllers at apartments and the ones in the lobby and remove my name amp UUID and add yours and add your e mail and change the prim quotas as it is shown there You need to enter the renters names and UUIDs Avatar keys into the ones at apartments where my name is so their rezzed prims can be counted by the system If you know what you are doing you may want to modify some other information settings in the notecards as well The Central Home Controllers in the lobby controls the lights inside and outside the lobby the lobby doors the ceiling fan and the radio in the lobby area and all the TPs to the apartments The tinting level for lobby windows is fixed at minimum as no privacy is required there When someone rents an apartment just add the renter s name and UUID Avatar key as a user on the config notecard in the Controller The Controller will read the Notecard and reset itself and the renter can start using the apartment the system He she will be able to use all the devices controlled by that Controller at the apartment Add a renter as shown below one user on one line Please do not leave space before or after the comma User Selo Wozniak 026a59e2 ef34 4eb4 8e39 ec3edf7e7a5c The c
10. onfig notecards inside the central home controllers and the other system devices are pretty much self explanatory if you wanted to make any other changes to customize them However if you need clarification on anything regarding the system please contact me 7 AVATAR KEY UUID FINDER An avatar key UUID finder is added to the package and it will rez in front of the Controller in the lobby when you rez the tower Just click it and your UUID number will be shown in local chat window You can have your renters click it get their UUID and copy amp paste it to you too 8 PRIM COUNTER The Central Home Controller panel is also a prim counter You can see the prims over the panel as a hovertext You need to add your renters and their partners friends as users into the controllers and their prims will be counted You may not want to add your name on renters controllers as you only need to see their prim usages When the allocated quota is exceeded the hovertext goes red When the prims are normal it is white You will be notified on prim overage Updated Posted Jan 3 2012 9 10 11 SECURITY ORB The black round device on the ceiling inside the apartment is the security orb It is configured already Just click to turn it on it is red then or off it is black LIGHTS There are ceiling lights inside the apartments You can turn them on off by clicking on them You can change the light colors by editing the values on the config note
11. partment is 15 prims The yard plants garden lamps and paintings are not linked to the tower You may choose not to use one or some of them to save prims See the TIPs section at the end of this manual to learn how to save prims TOWER FOOTPRINTS 31mx31m 961sqm 93 x93 8 649sqf GRASSY YARD FOOTPRINTS 60x60 3 600sqm 180 x180 32 400sqf You may choose not to use it or you may make it larger up to 64mx64m RECOMMENDED PLOT SIZE AND PRIMS 8192sqm or larger 3 500 prims It depends on how you will decorate the apartments and how many prims you will allocate to each renter to use TOWER HEIGHT 157 meters 471 CEILING HEIGHT Apts 6 meters 18 lobby 8 meters 24 PERMISSIONS COPY MOD NO TRANSFER Scripts are Copy only ID_Number 100 and 200 for the controllers in the lobby and 112011 through 112032 for the Apts The operating channel IMPORTANT 1 If you rez more than one copy of the tower on the same SIM you need to change this ID_ Numbers in all the Central Control pads and other devices controlled by the central home controllers to prevent conflicts IMPORTANT 2 After rezzing amp saving the tower in its place reset scripts in all TP pads and then UPDATE SYSTEM on the controllers in the lobby and at the apartments before using the Teleporters This is a one time process until you replace the tower and rez a fresh one 3 QUICK START REFERENCE GUIDE 1 Rez the tower move it to its final location and cl
12. please pass this information around On the top SL menu go to Advanced Press Ctrl Alt D if it isn t already there Click on Debug Settings In the window that opens type or cut and paste RenderVolumeLODFactor as one word on the top line Change the numerical value below it to 4 And also make sure renderdynamicLOD false in Debug Settings Now the sculpts and textures will not distort when viewing them from a distance TIP 8 f there are meshed items in a building you need to use a mesh enabled viewer like the latest SL viewer Firestorm and Phoenix to see those items right Now more and more meshed items are being used around SL and we will see them even more as they allow creators to make more realistic items than sculpties and regular prims However they have some issues that may limit its widespread use and in all creations TIP 9 You can place a radio and a TV in the lobby and a monitor dummy TV Extender or anything else the creators name them at each apartment The renters can change the radio stations and the TV channels in the lobby and go back to their apartments to listen watch TIP 10 After you have saved your tower you may notice some prims are a little bit off 0 1 degree maybe and that is an ongoing problem in SL Please select that prim and make its rotation 90 180 270 360 whichever is closer to it Sometimes linked prims may shift slightly and there is no fix to stop that as far as know TIP
13. reference If you need to rezz the tower at exactly the same location you can use these values POSITION X Y Z ROTATION X y Z TIP 2 How to unlink a prim Right click on that prim Edit check the Edit linked parts box on top now left click on the prim to be unlinked Go to Tools menu on top of SL screen click Unlink The prim is unlinked TIP 3 You can resize all prims including mega prims at this tower now You can also change their textures and colors TIP 4 You can get someone s UUID number Avatar Key by having them click on a UUID Avatar key finder supplied to you in the rez box If you use Phoenix Firestorm Viewer then you can see Updated Posted Jan 3 2012 someone s UUID number when you check their profile The UUID Finder will rez in front of the Central Controller in the lobby when you rez the tower TIP 5 You can save some prims by choosing not to use the lights plants grassy yard garden lamps fireplaces ceiling fans welcome mats and door casings However would recommend you keep them as they add to the tower TIP 6 If you mess up the tower badly rezzing a fresh copy is always better than trying to fix it TIP 7 Sculpted prims if used sculptured prims sculptees or sculpties are being used in SL more and more not only to save prims but also to make the buildings look more beautiful and realistic In order to minimize the sculpted prim and texture distortion do the following and
14. to place your servers for vendors ads notice boards etc There is a low prim TV stand fireplace areception desk and an office chair in the lobby You can replace the sign texture over the lobby doors where it says SELO TOWER 22 with any texture In the same way you can replace the textures on apartment number pads and teleporters with your own if you like The floors are are carpeted for comfort You may want to re texture the floors as you like 1 Updated Posted Jan 3 2012 You may want to make copies of the welcome mat 1 prim the fireplace 6 prims and the ceiling fan 2 prims the TV stand 1 prim and place them at apartments too Only 10 additional prims per apt I have placed a pine tree a palm tree set a pink tree and three sea trees in the yard You can make copies and use more of them around the tower Flowers in the lobby and in the yard are 4 types and each one has about 10 different plants You can click select Next or Previous to change the flowers The TP pad on the left left as you enter the lobby is for the Apts 1 12 while the one on the right Wall is for APts 13 22 and the roof 2 SPECIFICATIONS TYPE 21 APTS RESIDENTIAL TOWER UNFURNISHED PRIMS Grassy Yard 28 prims Additional stuff in the lobby 23 prims Paintings in the apartments 22 prims Tower and the Central Control devices doors lights security orbs controllers doors 261 Each apartments is 12 prims Total prims 334 Each a
15. uilding
Download Pdf Manuals
Related Search