Home

Digital Ca_corder

1. Select CINEMA to insert black bands on the top and bottom of the screen Note During playback on wide screen TVs the black bands are cut and the screen ratio becomes 16X9 A O icon will appear in the camcorder s LCD or viewfinder During playback recording on a standard 4X3 TVs viewfinders or monitors black bands appear like a letterbox 16X9 movie Select SQUEEZE for playback on TVs with a 16X9 aspect ratio This naturally expands the image to fit the screen without distortion A icon appears on the camcorder s LCD or viewfinder In this mode playback on a standard 4X3 TV monitor or viewfinder will display an elongated image 6 When the right choice is highlighted press in the MENU BRIGHT dial twice to activate your selection and exit the menus New 16x9 TV Screen Standard Shape TV Screen Cutting Wind Noise To help cut down on the noise created by wind when shooting outside use the Wind Cut feature Note When using wind cut the sound quality changes This is normal Activating Wind Cut 1 Rotate the MENU BRIGHT dial to highlight the MANUAL icon J Press in the MENU BRIGHT dial in to highlight the submenus 2 Rotate the MENU BRIGHT dial to highlight WIND CUT Press in the MENU BRIGHT dial to display the submenus 3 Rotate the MENU BRIGHT dial to highlight either ON or OFF Press in the MENU
2. Digital Camcorder User s Guide Changing Entertainment Again Safety Information Be sure to read all the safety information before you begin to use this product WARNING WYFN tll tle To reduce the risk of electric shock do not remove cover or back No To reduce the risk gt ori of fire or electric RISK OF ELECTRIC SHOCK user serviceable parts inside Refer DO NOT OPEN servicing to qualified service shock do not personnel expose this camcorder or AC charger to rain or moisture This symbol indicates This symbol indicates dangerous voltage important instructions inside the product that accompanying the presents a risk of electric product shock or personal injury CAUTION To prevent electric shock match wide blade of plug to wide slot fully insert ATTENTION Pour viter les chocs lectriques introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu au fond To reduce risk of injury charge only rechargeable batteries recommended by the manufacturer for this camcorder Other types of batteries may burst causing damage and personal injury FCC Regulations state that unauthorized changes or modifications to this equipment may void the user s authority to operate it Product Registration Please fill out the product registration card and return it immediately Returning this card allows us to contact you if needed
3. Keep your sales receipt for proof of purchase to obtain warranty parts and service and attach it here Record the serial number and model numbers located on the bottom of the camcorder Model No CC9370 Serial No Purchase Date Purchased From ASSISTANCE 00000 ee ceseesecsceseseeseeneseesse 3 First Time Operation 0 3 Getting Started 2 csssessetvonncsetscxecees 3 Using the LCD Monitor 7 Reviewing Operating Controls 9 Powering the Camcorder 11 Using the Adapter Charger 11 Using the Rechargeable Battery 12 Charging the Battery 13 Battery Lienee u 14 Battery Level Indicator 14 Battery Care and Storage 14 Other Camcorder Details 15 Shoulder Sap 55 lt asivinesestoie 15 Working With the Right Media 16 Mini DV Cassettes sesser 16 Erase Protection Tab 16 Recording and Playback Speeds and TCS ennienni 16 Cassette Notes essssessrsrsrsrersess 17 Care and Storage cccstscceseass 17 Time Remaining Display 17 On Screen Preferences 18 Display Menu Options 18 Setting the Date and Time 18 Displaying Information on the Camcorder or TV 19 Displaying Date and Time Information On Screen 20 Time Code Display 20 Using the Monitors 22 Seeing What You Are Recording ceccecccsseeenecseeeee 22 Using the LC
4. he carton used to refurn the unit Make sure vou insure your shipment in 2 Carefully pack the unit excluding all accessories using the original box and packing material if possible 3 Include with the shipment Evidence of purchase date such as a bill of sale to verify your unit s warranty eligibility A brief note describing your camcorder s problem Your name address and phone number Return transportation storage handling and insurance costs are your sole responsibility We accept no liability in case of damage or loss 4 The representative will advise the address to mail a cashier s check or money order for payment if there are any out of warranty labor or parts charges and you elect not to use your credit card 5 Upon receipt of your product a new or refurbished unit will be shipped to you To have your Camcorder repaired by an Authorized RCA Camcorder Service Center Check with your dealer or call 1 800 336 1900 for the Authorized RCA Camcorder Service Center nearest you Take your unit to the Authorized RCA Camcorder Service Center of your choice Show the Authorized RCA Camcorder Service Center representative evidence of purchase date such as a bill of sale Pick up your camcorder when repairs are complete What your warranty does not cover Adjustment of customer controls Damage from misuse or neglect e A unit that has been modified or incorporated into other pr
5. 14 Recharging takes approximately 70 minutes for the battery depending on its condition Notes If a protective cap is on the battery remove it before use or charging When charging a battery for the first time or after a long storage period the CHARGE indicator may not light on the Adapter Charger Remove the battery and try again Charge the battery in temperatures between 50 and 90 degrees Fahrenheit 10 35 degrees Celsius Charging times are based on a fully discharged battery Charging times vary depending on ambient temperature and battery condition If you connect the camcorder s DC cord to the Adapter Charger during battery recharging power is supplied to the camcorder and charging stops After repeated charging and use battery life gradually decreases When operation time is too short to be useful the battery should be replaced If the battery discharging must be stopped in the middle remove the battery from the adapter charger before unplugging it from the AC outlet If the battery pack becomes too hot remove it from the charger and let it cool down Let a hot battery cool down before attaching it to the AC adapter charger Shoulder Strap The camcorder s shoulder strap is designed to let you carry the camera from your shoulder and when ready bring the camcorder to shooting position in one quick movement Attaching the Shoulder Strap l Make sure the battery pack or
6. Adjust the brightness of the LCD monitor page 22 If the LCD is rotated forward make sure it is fully rotated 180 degrees Turn the camcorder s power off and on again 67 General Power requirement 6 3 VDC Power consumption Viewfinder on 4 3 watts LCD monitor on 5 3 watts Weight 1 3 Ibs 550g Dimensions Including Viewfinder 3 3 16 W x 3 13 16 CH x 6 5 16 D 80 W x 96 H x 159 D mm Video Recorder Section Format DV Record playback system Digital component recording Video signal ELA standard NTSC color Viewfinder 0 24 Black and white electronic viewfinder LCD Monitor 3 diagonally measured LCD TFT active matrix system Camera Section Image sensor 1 4 CCD imager Lens F1 6 f 3 9 to 62 4mm 16 1 power zoom lens 400 1 digital zoom Filter diameter 40 5 mm Tripod Mount One 1 4 x 20 threaded hole AC Adapter Charger Power requirement 110 240 V 50 60 Hz Power consumption 23 watts Weight 56 lbs 2502 Dimensions 2 11 16 W x 1 1 2 CH x 4 3 8 D 68 W x 38 H x 110 D mm 68 After Using the Camcorder 2 fo Turn off the camcorder Slide and hold the OPEN EJECT latch in the direction of the arrow then pull the cassette holder cover open until it locks The cassette holder opens automatically Remove the cassette Press the area marked PUSH HERE to close the cassette holder Once the cassette holder is pushed in it recedes auto
7. POWER Indicator CHARGE Indicator CAUTION LY Arrow a Note If you try to charge a battery that has not been charged for a long period of time it may take a few minutes for the CHARGE indicator to flash After the battery is charged the CHARGE indicator stops blinking and remains lit Remove the charged battery by sliding it off the Adapter Charger Attach the charged battery to the camcorder as described on the previous page Lithium ion Rechargeable Battery model 247800 or optional model BB46L To AC Wall Outlet 100 240 Volts 50 60 Hz Adapter Charger model 247801 DC OUT Jack When a battery is attached to the Adapter Charger do not turn them upside down The battery may fall off and be damaged or cause injury gt 13 Battery Life Battery Level Indicator The battery level indicator appears in the viewfinder or LCD monitor and reveals the amount of power left in the rechargeable battery Notes The battery level indicator is not recorded on the tape When mma appears the battery is fully charged As power is used ig will appear which will be followed by the CE icon Finally when the battery power is almost gone flashes on screen The camcorder turns off automatically after a few seconds Before replacing the battery or plugging the DC Cable into the camcorder set the Power Switch to OFF to turn off the camcorder Battery Care and Storage
8. For how long after your purchase 90 days for labor charges One year for parts The warranty period for rental units begins with the first rental or 45 days from date of shipment to the rental firm whichever comes first What we will do During the initial 90 days Exchange your camcorder with anew or refurbished unit or repair your camcorder The option will be ours There will be no cost to you Exchange your camcorder with anew or refurbished unit or repair your camcorder The option will be ours Parts will be provided at no charge but you will be responsible for the cost of labor required for the repair How you get service Call 1 800 283 6503 and have your unit s date of purchase and model serial number ready The model serial number information is on the bottom of your camcorder A representative will troubleshoot your problem over the phone If the representative determines that you should receive a replacement unit you will be provided with a Service Request SR number and the location of a nearby exchange point if one exists No returns will be accepted without the SR number To receive a replacement Camcorder before you refurn yours Option I 1 Provide your Discover MasterCard or Visa account number and expiration date to our phone representative This is for security purposes If we receive your unit excluding all accessories within 14 days from the date you were provided
9. 11 Insert a videotape into the VCR 12 Press the camcorder s Play Pause Button ID to begin playback 13 Press the record button on the VCR to begin capture DV IN OUT Connector Cover Open when connecting cables IEEE 1394 Connection Connecting the Camcorder to a Computer Using an IEEE 1394 Jack It is also possible to transfer video and still images to a computer equipped for digital video capture using an IEEE 1394 board 1 Locate the IEEE 1394 cable that came with the camcorder 2 Make sure the camcorder and computer are turned off 3 Connect one end of the IEEE 1394 cable to your computer 4 Connect the other end of the IEEE 1394 cable to the camcorder s DV IN OUT jack 5 Press in the Thumb Lock and rotate the Power Switch to playback mm mode Connection Jack COMPUTER IEEE 1394 Connection Jack Note Most computers with aly IEEE 1394 capabilities have the jack on the rear of the CPU 6 Turn on the computer 7 Follow your computer s video capture software instructions to upload the camera s data to the computer 8 Press the camcorder s Play Pause Button gt I to begin playback Notes It is recommended to use the AC Adapter Charger as the power supply instead of the battery pack for uniform playback Date and time information cannot be captured to a computer When using a DV cable be sure it has a core filter
10. Cassette Holder cover door 10 Push Here 6 Cassettes care and storage 17 MiniDV 16 Record Protection Tab 6 CHECK TAPE S ERASE PROTEC TION SWITCH Indicator 24 CINEMA Mode 36 CLASSIC FILM 31 Clock Adjustment 18 42 Connections 50 basic 50 capturing sound only 54 to a computer 53 toaTV 51 toa VCR 52 to another DV camcorder 55 using A V jacks 51 52 54 using an IEEE 1394 cable 53 55 Connectivity Jacks 9 Core Filter 74 CRK76 Remote Control 58 Customer Assistance and Service 3 71 D Date and Time displaying 20 setting 18 Date and Time Display 42 DC jack cable 3 IN 4 OUT 4 Demo Mode 40 Digital Image Stabilization 35 Digital Zoom 47 75 Display Menu 20 29 41 options 18 DISSOLVE 30 Dubbing digital 55 sound 54 E Exposure 29 control 32 Eyepiece focusing 23 F Fade and Wipe Effects 29 FADER B W 30 FADER BLACK 29 icon 29 Fast Forward Button 9 FCC Declaration of Conformity 79 Focus 45 auto 45 manual 46 G Gain Up 39 AGC 39 auto 39 off 39 setting up 39 H Handstrap 9 adjusting 4 Head Cleaning Warning 24 I ID Number 40 setting 40 76 Image Stabilization activating 35 Indicators on screen 24 Industry Canada Information 79 Iris Lock setting 33 L LCD Monitor 6 9 22 43 rotating 6 22 using 7 22 Letterbox 36 Light AUTO OFF ON Switch 5 10 43 Lock Button 5 9 Long Play LP Mode 16 LP Speed 38 M Manual Focus 46 Manual Menu u
11. Connector Cover Open when connecting cables IEEE 1394 ee Connection Cable Digital Dubbing Using IEEE 1394 Jacks When sending a digital signal from one DV device to another there is little if any image or sound deterioration To Use This Camcorder as a Player 1 Make sure the power of both camcorders is off 2 Connect one end of the IEEE 1394 cable to each digital camcorder 3 Press the camcorder s Play Pause Button I to start playback 4 While watching the playback on the monitor start the receiving camcorder s record mode from the spot on the source tape you want to begin recording Connection Jack Video unit equipped with IEEE 1394 connector To DV IN OUT Connection Jack Notes It is recommended to use the AC adapter charger as the power supply instead of the battery pack for uniform playback For digital dubbing this camcorder can be connected to only one device at a time This camcorder can also be used as the recording camcorder If a blank portion or distorted image is played back during dubbing the process may stop to avoid capturing problem images Even though the IEEE 1394 cable is connected correctly sometimes the image may not appear during playback If this occurs turn off the power and make connections again When using an IEEE 1394 cable be sure it has a core filter attached The core filter reduces interference and is required to meet FCC standards 5
12. Qty Total Super Lightweight Tripod AC088 49 95 Soft Camcorder Case AC201A 34 95 Shoulder Strap ACS091 12 95 Rechargeable Battery 247800 69 95 Extended Life Battery BB46L 69 95 AC Adapter Charger 247801 89 95 A V Cable 249645 9 95 DC Cable 244268 28 60 IEEE 1394 Connection Cable 249644 39 95 RCA Universal Remote Control RCU800 39 95 All prices subject to change without notice Total Merchandise Sales Tax ceea We are required by law to collect the appropriate sales tax for each individual state county and locality to which the merchandise is being sent Shipping and Handling 5 00 _ Total Amount Enclosed Use VISA MasterCard or Discover Money order or check must be in U S currency only No COD or cash 60 Charge your order on your VISA MasterCard or Discover Card by filling in below USE YOUR CREDIT CARD IMPORTANT Copy complete account number from your VISA card LETT ICE TICE ICIS expiration eate L IMPORTANT Copy complete account number from your MasterCard Copy Number above your name on MasterCard CLIL Expiration date CLI CLI IMPORTANT Copy complete account number from your Discover Card eR OTANTA puo Expiration date C CI AUTHORIZED SIGNATURE Prices are subject to change without notice A complete and correct order will Print or type your name and ec save you days of waiting address clearly Ve ok cva aia
13. much you use zoom and pause The 247800 can be recharged with the AC adapter charger that came with the camcorder Custom compact soft case designed especially to provide protection and utility for your digital camcorder and most accessories Rugged fabric lined with soft non abrasive material and generous padding Has three outside pockets with storage for lens filters i adapters batteries and tapes BB46L Extended Life Battery 7 ACS091 Shoulder Strap 2 f This rechargeable 2 hour lithium i ion battery is designed specifically Designed to replace the shoulder strap for long life depending on how that comes with the digital camcorder much you use zoom and pause The BB46L can be recharged with All specifications and descriptions the AC adapter charger that came of accessories are subject to with the digital camcorder change without notice 57 247801 AC Battery Charger The 247801 battery charger plugs into an AC outlet and charges the 247800 or BB46L camcorder battery Because the 247801 operates on 100 240 Volts 50 60 HZ it can be used virtually anywhere in the world A plug adapter might be required in some countries Charging takes approximately 90 minutes for the 247800 RCU800 Universal Remote Control The RCU800 universal remote control is an RCA branded unit which can control your digital camcorder using the VCR2 or AUX buttons 58 244268 IEEE 1394 Cable Replac
14. BRIGHT dial to activate the choice 4 To exit menus rotate the MENU BRIGHT dial to highlight RETURN Press in the MENU BRIGHT dial twice to return to normal viewing Resetting Camcorder Defaults If you ever want to set the camcorder back to its original factory settings use the CAM RESET function 1 Rotate the MENU BRIGHT dial to highlight the MANUAL icon E Press in the MENU BRIGHT dial in to highlight the submenus 2 Rotate the MENU BRIGHT dial to highlight CAM RESET Press in the MENU BRIGHT dial to display the submenus 3 Rotate the MENU BRIGHT dial to highlight either CANCEL or EXECUTE Press in the MENU BRIGHT dial to activate the highlighted choice 4 To exit menus rotate the MENU BRIGHT dial to highlight RETURN Press in the MENU BRIGHT dial twice to return to normal viewing Using the Camera Menu Several options can be changed in the camcorder s CAMERA MENU You can adjust recording speed sound mode zoom gain up tally light computer ID number demonstration mode and side LED settings from the CAMERA MENU 37 Recording Mode Your camcorder can record in either Standard Play SP or Long Play LP speed In SP mode a 30 minute tape will record for 30 minutes whereas the same tape will record 45 minutes in LP speed LP speed decreases the quality of recordings Setting the Recording Speed 1 Rotate the MENU BRIGHT dial to highlight the CAMERA MENU icon R1 Press in the
15. DC cord is removed Following the illustration thread the strap through the eyelet Fold the strap back and thread it through the buckle Repeat the procedure to attach the other end of the strap to the other eyelet located under the Hand Strap Make sure the strap is not twisted Caution gt A When carrying the camcorder with the shoulder strap you should dose gt the LCD monitor and rotate the viewfinder down This helps prevent possible damage to the monitor or viewfinder from bumping against your body as you move Make sure the shoulder strap is firmly attached Hand Strap Shoulder Strap Eyelets Shoulder Strap Buckle 15 Mini DV Cassettes This camcorder is designed to work exclusively Mini IN NTSC with digital video cassettes Only cassettes marked with a Mini DV logo can be used with this unit Also keep in mind that this camcorder is not compatible with other digital media formats Note For details on loading and unloading cassettes into the digital camcorder see page 6 in this manual Frase Erase Protection Tab Beco You can use your videocassettes over and over again To erase a previous recording make sure that the Erase Protection Tab is set to REC To protect a cassette from being recorded over move the Erase Protection Tab to SAVE Recording and Playback Speeds and Times The camcorder records and plays back Slide tab to SAVE in Stan
16. MENU BRIGHT dial to highlight the CAMERA MENU icon R1 Press in the MENU BRIGHT dial to highlight the submenus 2 Rotate the MENU BRIGHT dial to highlight DEMO MODE Press in the MENU BRIGHT dial to display the submenus 3 Rotate the MENU BRIGHT dial to highlight either ON or OFF 4 Press in the MENU BRIGHT dial to activate the choice 5 To exit menus rotate the MENU BRIGHT dial to highlight RETURN Press in the MENU BRIGHT dial twice to return to normal viewing Exiting Demo Mode In step 3 from Accessing DEMO MODE select OFF or insert a videocassette Side LED The camcorder s side LED indicator can light up when the power switch is set to either automatic 2 or manual M record mode Accessing Side LED Mode 1 Rotate the MENU BRIGHT dial to highlight the CAMERA MENU icon 1 Press in the MENU BRIGHT dial to highlight the submenus 2 Rotate the MENU BRIGHT dial to highlight SIDE LED Press in the MENU BRIGHT dial to display the submenus 3 Rotate the MENU BRIGHT dial to highlight either ON or OFF 4 Press in the MENU BRIGHT dial to activate the choice 5 To exit menus rotate the MENU BRIGHT dial to highlight RETURN Press in the MENU BRIGHT dial twice to return to normal viewing Using the Display Menu Several important options are addressed in the DISPLAY MENU Here you can set how icons the date and time and time code are displayed You can
17. Mini DV cassette s record Protection Tab must be set to REC in order to be recorded on OPENIEJECT PUSH HERE marks the area to use to close the cassette compartment Caution o ee ee s e Ee Never open the cassette holder door by force This could damage the D Push on the area marked camcorder and void the warranty PUSH HERE until the The camcorder must be connected cassette holder locks to a power supply to load or eject a into place cassette E WE appears on the LCD or in the viewfinder when a recordable tape is inserted into the camcorder Use the LCD monitor to see what s recording To see what s recording use the color LCD monitor Note When the LCD monitor opens more than 25 degrees the viewfinder automatically turns off When the LCD monitor is closed the viewfinder automatically turns on To enable both you and the person being recorded to see what s on the LCD monitor you can rotate the screen 180 degrees so the front of the monitor faces forward Note With the LCD monitor completely rotated the viewfinder also turns on Using the LCD Monitor A B Open the monitor 90 degrees from the camcorder body Tilt the monitor 180 degrees forward or 90 degrees down as required for convenient viewing while recording MENUIBRIGHT dial To adjust the brightness of the LCD monitor s image rotate AIN the MENU BRIGHT dial FRS Note Adjusting the LCD
18. SCREEN DISPLAY MENU oma lt RETUR ATEMIME LODITV TIME CODE SIMPLE ta CLOCK ADJ Choose which information will be displayed on what devices Rotate the MENU BRIGHT dial to highlight LCD LCD TV or SIMPLE LCD Displays information only on the camcorder s LCD monitor and not on a connected TV screen LCD TV Makes the camera s display appear on a connected TY or VCR display as well as the camcorder s LCD monitor SIMPLE Keeps on screen indicators except the tape running indicator warning icons and date time information from appearing on screen This also keeps the camcorder s information except date and time from appearing on a connected TV or VCR display When you ve made your choice press in the MENU BRIGHT dial to select it and exit back to the DISPLAY MENU Note You can proceed to make changes to other DISPLAY MENU items or highlight and select RETURN and then END menu selections to exit the menus and return to normal record viewing 19 Displaying Date and Time Information On Screen l 20 With a power supply attached press in the Lock Tab and rotate the Power Switch to manual M record The power indicator lights Press in the MENU BRIGHT dial to display the camcorder s on screen menu system Rotate the MENU BRIGHT dial to highlight the DISPLAY MENU icon Press in the MENU BRIGHT dial to select it a DISPLAY MENU EE D eaa LCD S DATE T
19. anaran ge e oP ee th va a 1 l Na ame I l l Street l l l l Apt l i eeN qx a ae l City l i State i l l Please make sure that both sides of this form have been filled out completely D Detach Here Allow 4 weeks for delivery All accessories are subject to availability 61 To order accessories contact your local Dealer If a dealer is not nearby you can also follow the directions below to order by telephone or direct by mail United States and Canada Orders To place your order by phone have your Visa MasterCard or Discover card ready and call the toll free number listed below Use this number only to place an order for accessory items listed on this order form 1 800 338 0376 To place your order by mail detach and mail the completed order form with credit card information money order or check in U S currency made payable to Thomson Consumer Electronics Inc to the following address Video Accessories PO Box 8419 Ronks PA 17573 62 Troubles sometimes are caused by simple faults that you can easily correct without the help of a service technician by first checking a few basic remedies Before you call or take your camcorder to an Authorized RCA Camcorder Service Center look below for the type of trouble you are experiencing Then perform the simple checks and adjustments listed for that trouble If service should be necessary the warranty information lists
20. may not be possible if hand shake is excessive or when recording Subjects with vertical or horizontal stripes Dark or dim subjects Subjects with excessive backlighting Scenes with movement in various directions Scenes with low contrast backgrounds Switch off DIS when the camcorder is mounted to a tripod The icon blinks or disappears if DIS cannot be used Activating Image Stabilization 1 Rotate the MENU BRIGHT dial to highlight the MANUAL icon E1 Press in the MENU BRIGHT dial to highlight the submenus 2 Rotate the MENU BRIGHT dial to highlight DIS Press in the MENU BRIGHT dial to display the submenus fo Rotate the MENU BRIGHT dial to highlight ON Press in the MENU BRIGHT dial to activate your choice 4 To exit menus rotate the MENU BRIGHT dial to highlight RETURN Press in the MENU BRIGHT dial twice to return to normal viewing Tele Macro Focusing This feature allows for focusing on objects that are very close to the camcorder Usually the distance to a subject where the lens is in focus depends on zoom magnification Unless there is a distance more than 3 3 feet to the subject the lens is out of focus at the maximum telephoto setting With tele macro set to ON you can shoot a subject as large as possible at a distance of approximately two feet Activating Tele Macro 1 Rotate the MENU BRIGHT dial to highlight the MANUAL icon E1 Press in the MENU BRIGHT dial to h
21. monitor brightness does not affect the recorded image on cassette Rotating the MENUIBRIGHT dial adjusts the brightness of Start and stop recording the LCD monitor A B Press and release the Thumb When finished recording Remove the Lens Cap Put the camcorder in automatic record mode by pressing the Lock Button in and rotating the Power Switch to the icon Trigger to start recording The ppp icon appears in the viewfinder or LCD monitor but does not show up in the recording This indicator reflects that recording has started press and release the thumb trigger again to stop recording The camcorder is now in the record pause mode The icon appears in the viewfinder or on the LCD monitor 9 Play back your recording A Press the Lock Button in while rotating the Power Switch to the PLAY icon to put the camcorder in playback mode The Power Indicator lights B Press the Rewind Button 44 on top of the camcorder to reverse the cassette to the beginning When rewound completely the camcorder will automatically stop The time counter and date time on screen displays will blink C Press the Play Pause button I on top of the camcorder to start playback D View the recording using the LCD monitor or viewfinder Notes The LCD monitor displays the recording in full color while the viewfinder displays in black and white only Sound will play back if
22. or use a tripod SHUTTER Variable Shutter Speed 1 60 shutter speed is fixed to 1 60 of a second Black bands that normally appear when shooting a TV screen become narrower 1 100 the shutter speed is fixed at 1 100 of a second The flickering that occurs when shooting under a fluorescent light or mercury vapor lamp is reduced Continues on next page 31 SHUTTER Variable Shutter Speed 1 250 1 500 allows for fast moving images to be captured one frame at a time for vivid stable slow motion playback The faster the shutter speed the darker the picture becomes Use the shutter function under good lighting conditions Exposure Control Manual exposure adjustment is recommended for the following conditions When using reverse lighting or when the background is too bright When shooting a reflective natural background such as at the beach or when skiing When the background is overly dark or the subject is overly bright To Adjust Exposure Control 1 Rotate the MENU BRIGHT dial to highlight the EXPOSURE icon f1 Press in the MENU BRIGHT dial to highlight the submenus 2 Rotate the MENU BRIGHT dial to highlight MANUAL Press in the MENU BRIGHT dial to select it The menu screen disappears EXP appears on screen as well as the plus or minus indicator 3 Rotate the MENU BRIGHT dial toward to brighten the image or towards to darken the image maximum of plus or minus 6 32 4 Pr
23. recommended that you set the white balance to artificial light 4 when using the video light When not using the video light turn it off to save battery power LIGHT OFFIAUTOION switch open the LCD monitor to access Cautions fe nee ee Never operate the video light closer gt than one foot to people or other objects gas Bag ae bicg goa a The video light becomes very hot Do not touch it during operating or right after use Serious injury may result Do not place the camcorder in a carrying case right after using the ligit ooe en A Never operate the video light close to flammable or explosive material 43 Warning A S The video light and bulb need to cool for approximately 30 minutes after the camcorder has been used before the bulb assembly is replaced Do not touch the light bulb with your fingers If the bulb is accidentally touched wipe it with a soft cloth A Video Light Details Even if the battery indicator does not blink due to low battery charge the camcorder may turn off automatically when you turn on the video light or if the video light is turned on when you start a recording When LIGHT OFF AUTO ON switch is set to AUTO The video light may keep turning on and off depending on the lighting conditions If this happens manually switch the light ON or OFF using the LIGHT OFF AUTO ON switch If Slow Shutter mode is turned on the video light is likely to stay on W
24. the SR number only items not covered by warranty will be charged to your account IF YOUR UNIT IS NOT RECEIVED WITHIN 14 DAYS THE SUGGESTED RETAIL VALUE OF THE CAMCORDER WILL BE CHARGED TO YOUR CREDIT CARD This amount less 10 00 handling will be credited if the unit is subsequently received We will send you a replacement unit 3 Ship the unit back to us excluding all accessories using the replacement unit s carton Shipping instructions will be included in the carton along with your SR number which will allow you to easily ship the unit back to us Make sure you insure your shipment in case of damage or loss Include with the shipment Evidence of purchase date such as a bill of sale to verify your unit s warranty eligibility A brief note describing your camcorder s problem Your name address and phone number Return transportation storage handling and insurance costs are your sole responsibility We accept no liability in case of damage or loss Option II 1 We will send a replacement unit to the exchange point 2 The exchange location will notify you of its arrival 3 Take your unit excluding all accessories and your evidence of purchase date such as a bill of sale to the exchange location and you will be provided the new or refurbished unit 4 Ifthe repairs were covered by your warranty you will not be billed To receive a replacement unit after we have received your unit
25. 0 Recording Menu icons Playback Menu Icons Warning Indicators Indicates the amount of power left in the lo rechargeable battery An empty battery icon flashes on screen when Battery Levels the battery s power is almost exhausted Appears when the power switch is set to Ye either automatic Ef or manual M record and no cassette is in the camcorder Missing Cassette Warning Appears when the Erase Protection Tab is set to SAVE while the Power Switch is set to either automatic 4 or manual M record CHECK TAPE S ERASE PROTECTION SWITCH amp HEAD CLEANING REQUIRED USE CLEANING CASSETTE appears if dirt is Head Cleaning detected on the recording heads Use an Warning optional cleaning cassette to remove dirt 24 Warning Indicators a Condensation Warning TAPE Missing Cassette Warning TAPE END End of Cassette Warning DIFFERENT FORMATTED TAPE LENS CAP Covered Lens Warning SET DATE TIME Missing Information Warning Recording Mode Indicators F AUTO Auto Recording Indicator Fade and Wipe Effect CONDENSATION OPERATION PAUSED PLEASE WAIT appears if moisture occurs inside the camcorder When this indication appears wait at least one hour before using the camcorder again Appears if a tape is not loaded when the Recording Start Stop button or SNAPSHOT button is pressed when the Power Switch is set to automatic EY o
26. 5 Recording Tips 56 Try to make sure indoor scenes are well lit This improves picture quality and color reproduction Do not move the camcorder rapidly from side to side while recording A steady gradual pan avoids blurring and jitter Use the viewfinder or LCD monitor to make sure the camcorder is level while recording so that your scene isn t tilted Do not bump or tap the camcorder s microphone while recording because this sound will be recorded Include close ups of individuals when taping family outings or group functions Fading in and out of scenes makes your videos appear more professional Learn to use the special production effects available with your camcorder to add variety to your recordings Be aware of video and audio backgrounds Background details barely noticed while you are taping may show up as visual clutter on your recording Background noises especially TV sets radios household appliances traffic sounds etc might detract from the sound you want to record Avoid long still shots of landmarks and scenic attractions Recordings are more interesting if they include people and details Local color gives travel videos lasting appeal Consider recording a familiar or landmark scene from an unfamiliar vantage point Traveling Tips Write down your camcorder s serial number and keep it separate from the camcorder when traveling If your ca
27. D Monitor 22 Using the Viewfinder 23 Focusing the Eyepiece 23 On screen Indicators 1 0 0 0 24 Warning Indicators cee 24 Recording Mode Indicators 25 Playback Mode Indicators 27 On screen Menus o oo 29 Accessing Menus esseere 29 Fader Wipe Effects 29 Program AE with Special EffECIS si siscdnonnveindinancertenies 30 Exposure Control essees 32 Inis Lock sci stasp trates isdesadersa ities 32 White Balance Adjustment 33 Manual White Balance 34 Using the Manual Menu 35 Digital Image Stabilization 35 Tele Macro Focusing 35 Wide Mode sicsscccasceeatseas sees 36 Cutting Wind Noise 37 Resetting Defaults 37 Using the Camera Menu 37 Recording Mode cceees 38 Sound Mode ss ecssassnsevesdineess 38 Zoom Mode eseese 38 Grail UP 2ehioessciehesesseesecezseees 39 Tally Light 0 0 cee esecseeseeees 39 ID Number soscccssccuseeuptennstatss 40 Demo Mode 5 40 crsassciecon 40 Side LED swAsaiaciuieaale 41 Using the Display Menu 41 On Screen Displays 41 Date and Time Display 42 Time Codesoso 42 Clock Adjustment 0 42 Recording 43 Recording Details 00000 43 Vide Light vance sssieenitiventartnes 43 Camcorder Focus 06 45 Auto FOCUS occ cisiecstevershs 45 Manual Focus eesse 46 Snapshot Feature 46 FRA
28. HT dial to select it 4 Rotate the MENU BRIGHT dial to highlight TIME CODE Press in the MENU BRIGHT dial to select the choice and display submenus DISPLAY MENU Ml RN CLOCK ADJ OFF Rotate the MENU BRIGHT dial to select ON or OFF ON Displays the time code on the camcorder s viewfinder or LCD monitor as well as a connected TV or VCR display Frame numbers are not displayed during recording OFF The time code is not displayed at all When you ve made your choice press in the MENU BRIGHT dial to activate it and exit back to the DISPLAY MENU Note You can proceed to make changes to other DISPLAY MENU items or highlight and select RETURN and then END menu selections to exit the menus and return to normal record viewing 21 Seeing What You Are Recording To see what the camcorder s recording use either the LCD monitor or the viewfinder monitor When the LCD monitor is open more than 25 degrees the viewfinder turns off When you close the LCD monitor the viewfinder turns on To enable both you and the person you re recording to see what s being captured rotate the LCD monitor completely around 180 degrees so the front of the monitor faces the person being recorded the viewfinder turns on automatically when the monitor is turned to the front Using the LCD Monitor The camcorder s LCD monitor is a miniature color monitor that displays the images captured by the camcorder in either r
29. IME E3 TIME CODE pO CLOCK ADJ AH ES fem Rotate the MENU BRIGHT dial to highlight DATE TIME Press in the MENU BRIGHT dial to select it DISPLAY MENU EE lt RETURN Rotate the MENU BRIGHT dial to select ON or OFF ON Sets the date and time to always be displayed on screen OFF The date and time do not appear on screen 6 When the desired choice is made press in the MENU BRIGHT dial to activate it and exit back to the DISPLAY MENU Note You can proceed to make changes to other DISPLAY MENU items or highlight and select RETURN and then END menu selections to exit the menus and return to normal record viewing Time Code Display During recording a time code is captured on the tape This code confirms the location of the recorded scene on the tape during playback If recording starts from a blank portion of the tape the time code begins counting from 00 00 00 minutes seconds frame number If recording starts from the end of a previously recorded scene the time code continues from the last time code number Note The time code is automatically set to 00 00 00 when a tape is ejected 1 With a power supply attached press in the Lock Tab and rotate the Power Switch to manual M record The power indicator lights 2 Press in the MENU BRIGHT dial to display the camcorder s on screen menu system 3 Rotate the MENU BRIGHT dial to highlight the DISPLAY MENU icon Press in the MENU BRIG
30. ME 8 sscscisansesdesnanessicens 46 FULD sonene 46 MULTIA rrenananak 47 MULTI 9 nianna 47 PIN UP oneesesreesisrisiais 47 Recording Recording Details Digital and Optical Zooming 47 Using the Zoom Lever 47 Playback ceisiais 49 Basic Playback ccccctsscesssiectererrace 49 Speaker Volume ee 49 Still Playback Mode 50 Shuttle Search sss cssaccsencuoedies 50 Frame By Frame Playback 50 Basic Connections 0 0 0 eee 50 Displaying Data on a TV or VER eceran nnna iaaa 50 Viewing Recordings on a TY Using A V Input Jacks 51 Connecting to a TV Using A V Input Jacks oe 51 Connecting to a VCR Using A V Input Jacks 52 Connecting to a Computer Using IEEE 1394 Jacks 53 Connecting to a VCR to Capture Sound Only 54 Dubbing to Another Digital Video Camcorder 55 Camcorder Tips 0 0 0 0 eeeeeee 56 Recording Tips ceeesecseeseeee 56 Traveling Tips cccsecseseeeeeee 56 Optional Accessories 0 6 5 37 Soft Carrying Case wees 57 Shoulder Strap esesssssesresrrerssrsee 57 Rechargeable Battery 37 Extended Life Battery 0 0 57 AC Battery Charger 58 Universal Remote Control 58 IEEE 1394 Cable sensers 58 AN CANS scacicistiserdedesaperaereeines 58 DPDC Cable wistevohstirtecccannenyeseanvenns 58 Tapod erreina nE 59 Trouble Checks cccesesseees 63 Specifications 0 0 0 0 eeceee
31. MENU BRIGHT dial to highlight the submenus 2 Rotate the MENU BRIGHT dial to highlight REC MODE Press in the MENU BRIGHT dial to display the submenus 3 Rotate the MENU BRIGHT dial to highlight either SP or LP Press in the MENU BRIGHT dial to activate the choice 4 To exit menus rotate the MENU BRIGHT dial to highlight RETURN Press in the MENU BRIGHT dial Avice to return to normal viewing Sound Mode The digital camcorder can record in either 12 bit or 16 bit sound Both modes will record stereo sound but the 12 bit mode will record in four separate channels whereas 16 bit mode records in two Using 12 bit sound is recommended with audio dubbing and is the factory preset for the camcorder 38 Setting the Sound Mode 1 Rotate the MENU BRIGHT dial to highlight the CAMERA MENU icon RJ Press in the MENU BRIGHT dial to highlight the submenus 2 Rotate the MENU BRIGHT dial to highlight SOUND MODE Press in the MENU BRIGHT dial to display the submenus 3 Rotate the MENU BRIGHT dial to highlight either 72 BIT or 16 BIT Press in the MENU BRIGHT dial to activate the choice 4 To exit menus rotate the MENU BRIGHT dial to highlight RETURN Press in the MENU BRIGHT dial fwice to return to normal viewing Zoom Mode This digital camcorder can magnify images up to 250 times 250X the normal view using digital interpretation There is also an optical zoom the amount actually supported by the ca
32. T dial until the amp icon begins blinking When the setting is complete the icon stops blinking 4 Press in the MENU BRIGHT dial to complete setting manual balance Only the manual white balance icon is displayed To Change the Tint for Recording In step 2 of White Balance Adjustment substitute colored paper for white The white balance is adjusted based on the color changing the tint Red paper will produce deeper greens blue produces deeper oranges and yellow produces deeper violets Notes It may be difficult for the camcorder to focus on a white sheet of paper Use manual focus instead Because color temperature is different depending on lighting sources natural or fluorescent light candlelight etc the subject tint will differ depending on the white balance settings Adjusting white balance manually may produce more natural images Once manual white balance has been set it remains set even if the camcorder s power is turned off or the power supply is removed Using the Manual Menu Several options can be changed in the camcorder s MANUAL MENU You can work with image stabilization tele macro focusing wide mode settings wind sound removal and resetting the camcorder to factory settings Digital Image Stabilization Digital Image Stabilization DIS is used to compensate for unstable images cause by camera shake especially at high magnifications Notes Accurate stabilization
33. also set the date and time On Screen Displays You can set what information is shown on which displays the camcorder is using including the LCD monitor viewfinder or even a TV screen Accessing On Screen Settings 1 Rotate the MENU BRIGHT dial to highlight the DISPLAY MENU icon 181 Press in the MENU BRIGHT dial in to highlight the submenus Rotate the MENU BRIGHT dial to highlight ON SCREEN Press in the MENU BRIGHT dial to display the submenus 3 Rotate the MENU BRIGHT dial to highlight your selection N LCD keeps indicators except the date time and time code from appearing on a connected TV screen LCD TV makes indicators appear on screen when connected to a TV SIMPLE shows only a basic display including the tape running indicator warning indicators date time etc Also keeps the camcorder s display except date time and time code from appearing on a connected TV monitor 4 Press in the MENU BRIGHT dial to activate the highlighted choice 5 To exit menus rotate the MENU BRIGHT dial to highlight RETURN Press in the MENU BRIGHT dial twice to return to normal viewing 41 Date and Time Display You can turn the date and time display on or off on the camcorder 1 Rotate the MENU BRIGHT dial to highlight the DISPLAY MENU icon I Press in the MENU BRIGHT dial in to highlight the submenus 2 Rotate the MENU BRIGHT dial to highlight DATE TIME Press in the MENU BRIGHT d
34. amcorder The camcorder automatically focuses at most distances when zooming Optical zooming is possible up to 10 times and digital zooming allows up to 250 times normal magnification Using the Zoom Lever W and T To zoom in tight telephoto or out wide wide angle rotate the zoom lever to either T or W 47 With tele photo zooming it is possible to capture images to a maximum of 250 times normal magnification To do this the camcorder uses technology to artificially enhance the image see pages 38 39 for details Note see pages 38 39 for details on selecting a digital zoom mode For close up telephoto zoom rotate the zoom lever toward T Optical zoom see pages 38 39 for details is the natural non enhanced magnification that the camcorder s lens will support This digital camcorder has an optical zoom of 10 times 10X For a wide angle zoom rotate the lever toward W When using the zoom lever an indicator appears on screen to display the approximate zoom ratio 10x 250X Digital Zoom Zone 10X Optical Zoom Zone 48 Notes While zooming focusing may become unstable If so set the zoom while in record standby mode and adjust the image using manual focus see page 46 for details Once the focus is set zoom the camcorder in or out while recording During digital zoom the quality of image may suffer Digital zoom cannot be used when image enhancement effects su
35. and Wipe effects pages 29 30 Program AE with Special Effects pages 31 32 and Digital Image Stabilization page 35 Set the Power Switch to playback qm mode page 49 Set the TV to its video input channel see the TV s User s Manual Make sure all A V connections are correct and snug Close the cassette holder door page 6 Turn the speaker volume down page 49 Clean the video heads with an optional cleaning cassette see your local dealer to purchase Wipe them gently with soft cloth Wiping strongly can cause damage page 69 Check the section of the manual that explains LCD monitor and viewfinder icons pages 24 28 Trouble An error indication E01 E06 appears on screen The charger indicator on the AC Adapter Charger does not light No picture appears on the LCD monitor When the camcorder is connected via the IEEE 1394 connector the camcorder does not operate Checks and Adjustments Remove the power supply battery pack etc and wait a few minutes for the icon to clear When it does reattach the power supply turn on the camcorder s power and resume recording If the indication remains after repeating the above procedure two or three times consult your nearest camcorder service technician To protect the battery it is recommended to charge it in places with a temperature of 50 95 degrees Fahrenheit 10 C to 35 C pages 13 14 Remove the lens cap
36. attached The core filter reduces interference and is required to meet FCC standards 53 Connecting the Camcorder to a VCR to Capture Sound Only VCR Connector cover Open when connecting cables AN Jacks oO Note Can be on AN Connection Cable front or roar oI NCE Included with Camcorder Yellow Plug White Plug NOT Connected LAUDIO IN Red Plug R AUDIO IN Dubbing Sound to a VCR Using 7 Connect the A V Connection A V Input Jacks Cable s single plug into the 1 Locate the A V cable that came camcorder s A V Jack with the camcorder 8 Press in the Thumb Lock and 2 Make sure all units are turned off rotate the Power Switch to 3 Connect the white plug of the A V playback amm mode cables to the VCR s Left AUDIO 9 Turn on the VCR IN jack L AUDIO IN 10 Tune the VCR to its video input 4 Connect the red plug of the channel to hear the recording A V cables to the VCR s Right 11 Start the VCR s record mode AUDIO IN jack R AUDIO IN 12 Press the camcorder s Play Pause Note Some VCRs do not offer both left Button P I1 to begin playback and right audio jacks f your TV only has one audio jack use the A V cable s white plug for audio 6 Open the camcorder s Connector Cover 54 Dubbing to Another Digital Video Camcorder Equipped With an IEEE 1394 Connection Port DV IN OUT
37. ch Allows high speed searching in either forward or reverse directions Activating Shuttle Search 1 Press the Fast Forward Button P gt or the Reverse Button 44 during playback 2 To resume normal playback press the Play Pause Button gt ID During playback press and hold the Reverse 4 or Forward P gt Button The search continues as long as the button is held Once released normal playback resumes A slight mosaic effect appears on screen during Shuttle Search This is normal 50 Frame By Frame Playback Allows frame by frame searching 1 Press the Play Pause Button gt I during playback to pause the image 2 Rotate the MENU BRIGHT dial towards for forward frame by frame playback or towards for reverse frame by frame playback To resume normal playback press the Play Pause Button gt I1 Basic Connections This manual includes information for some basic types of connections Displaying Camcorder Data on a Connected TV or VCR Date Time set DATE TIME to ON or OFF in the DISPLAY menu Time Code set TIME CODE to ON or OFF in the DISPLAY menu Playback Sound Mode Tape Speed and Tape Running set ON SCREEN to LCD or SIMPLE in the DISPLAY MENU Notes It is recommended to use the AC Adapter Charger as the power supply instead of the battery pack to achieve uniform playback Use the provided A V Connection Cable making sure to connect the end with a s
38. ch as picture wipe dissolve see pages 29 30 or video echo see page 31 are being used Tele macro focusing as close as two inches from the subject is possible when the zoom lever is set all the way to W see also Tele Macro on page 35 Playback Options The camcorder s playback features include displaying still images high speed shuttle search and frame by frame playback In this section you will also learn how to connect your camcorder to a TV VCR or computer Playback features PLAY PAUSE FORWARD REVERSE STOP can be handled using the camcorder s buttons This camcorder can also be controlled by most RCA GE or PROSCAN universal remote controls using the VCR2 button Such remotes without a VCR2 button should be able to be programmed to control the camcorder using the AUX button See the manual that accompanied the universal remote for details on programming it Note See the Accessories section for more information about ordering an optional remote control Basic Playback 1 Insert a Mini DV cassette 2 Press in the Lock Button and rotate the Power Switch to playback GE mode 3 Press the Play Pause Button gt I to start playback To stop playback press the Stop Button W Press the Rewind Button lt 4 to reverse playback direction or the Fast Forward Button P gt to advance the tape while in stop mode Play Pause Rewind Button Button Stop Button Fast F
39. dard Play SP or Long Play to protect contents LP mode Select the recording speed or REC to use using the on screen menus see page 38 for details The selected speed is displayed on screen but not in the recording The maximum SP and LP recording times for popular Mini DV cassettes are shown SP Provides the best picture less picture noise but the shortest recording time as few as Recording Time 30 minutes Cassette SP LP LP Provides the longest 30 min 30 min 45 min recording times up to 120 60 min 60 min 90 min minutes with an 80 minute tape i but has more potential picture 80 min 80 min 120 min noise than SP in normal playback 16 Cassette Notes A power supply must be attached to load or eject a cassette When loading a cassette it takes a few seconds for the Cassette Holder to open Never apply force to the holder or door cover as this might result in damage to the camcorder and void the warranty If the cassette holder does not open after a few seconds close the holder door and try again If it still does not open turn the camcorder off then on again If the cassette does not load properly open the cassette holder door and fully remove the unit Wait a few minutes and reinsert it When the camcorder is suddenly moved from a cold environment to a warm environment wait a short time before opening the cassette holder door Closing the cas
40. deo editor using the Service Terminal a unique ID number must be assigned The numbers available range from 01 to 99 The factory default setting is 06 Setting the ID Number 1 Rotate the MENU BRIGHT dial to highlight the CAMERA MENU icon R1 Press in the MENU BRIGHT dial to highlight the submenus 2 Rotate the MENU BRIGHT dial to highlight ID NUMBER Press in the MENU BRIGHT dial to display the submenu 3 Rotate the MENU BRIGHT dial to highlight the desired number A Press in the MENU BRIGHT dial to activate the choice 5 To exit menus rotate the MENU BRIGHT dial to highlight RETURN Press in the MENU BRIGHT dial twice to return to normal viewing 40 Demo Mode The camcorder can demonstrate certain functions such as Program AE with special effects and can be used to confirm how these functions work using Demo Mode When Demo Mode is turned on and the menu screen is exited a display of the camera s features begins Notes Performing any action during demonstration mode stops the demonstration temporarily If no operation is performed for more than one minute after action has ceased Demo Mode starts back up If a cassette is in the camcorder the demonstration cannot be turned on Demo Mode stays on even if the camcorder s power is turned off Some functions are not available when Demo Mode is turned on After viewing the demonstration turn off Demo Mode Accessing Demo Mode 1 Rotate the
41. e image will not darken or lighten Setting Iris Lock 1 Rotate the MENU BRIGHT dial to highlight the EXPOSURE icon Press in the MENU BRIGHT dial to highlight the submenus 2 Rotate the MENU BRIGHT dial to highlight MANUAL Press in the MENU BRIGHT dial to select it The menu screen disappears EXP appears on screen as well as the plus or minus indicator 3 Adjust zoom so the subject fills the screen then press and hold the BACKLIGHT Button EXP 08 Iris Lock oat Indicator and Exposure Value MENU BRIGHT dial for more than two seconds The exposure control indicator and the Iris Lock icon m appear 4 Press in the MENU BRIGHT dial and the icon changes to and the iris is locked EXP disappears Returning to Automatic Iris Control In step 2 of Setting the Iris Lock rotate the MENU BRIGHT dial to display AUTO The on screen exposure control indicator and D disappear Alternatively you can set the Power Switch to automatic F record Locking the Exposure Control and Iris After step 2 of Setting the Iris Lock adjust the exposure by rotating the MENU BRIGHT dial Then in step 3 lock the iris For automatic locking in step 2 of Setting the Iris Lock select AUTO and press and hold the MENU BRIGHT dial The iris becomes automatic after about 2 seconds MENU BRIGHT Dial Zoom Lever Power Switch 33 White Balance Adjustment White balance refer
42. ecord mode or for recording playback Cautions 180 oye 7 Never force the monitor Eto rotate completely around This could damage both the monitor and or the camcorder When carrying the unit with the shoulder strap close the monitor to prevent possible damage to it from bumping against objects as you move 1 Open the LCD monitor at least 25 degrees The viewfinder turns off For convenient viewing the LCD can be tilted once the monitor is open 90 degrees from the camera body Tilt the monitor forward up 180 degrees or down up to 90 degrees From a high angle such as over a crowd tilt the monitor down to record From a low angle such as when kneeling tilt the monitor up to record Adjust the brightness of the LCD s image by turning the bright control MENU BRIGHT dial This does not affect the brightness of the recording you are making Turn the dial toward to brighten the image Turn the dial toward to darken the image When finished recording close the monitor and lock it into place Note Recording on bright sunny days can make the LCD monitor hard to see Use the viewfinder instead Using the Viewfinder The camcorder s viewfinder is a miniature monitor that displays in black and white Note When the LCD monitor is open more than 25 degrees the viewfinder turns off unless the LCD is rotated 180 degrees to face forward With the LCD forwa
43. ecord standby modes To Open the PROGRAM AE menu Rotate the MENU BRIGHT dial to highlight the PAE EFFECT icon fal Press in the MENU BRIGHT dial to highlight the submenus Rotate the MENU BRIGHT dial to scroll through available choices 1 i TWILIGHT makes evening scenes look more natural White balance is initially set to but can be changed to a preferred setting When twilight is selected the camcorder automatically adjusts the focus from about 32 feet to infinity From less than 32 feet adjust the focus manually SEPIA recorded scenes have a brownish tint like old photos Combine this with the cinema mode for a classic look MONOTONE footage is shot in classic black and white Used together with Cinema mode it enhances the classic film effect CLASSIC FILM gives recordings a strobe effect STROBE recordings look like a series of consecutive snapshots amp VIDEO ECHO adds a ghosted image to the subject Zoom magnification over 10X is not available SLOW SLOW SHUTTER lights dark subjects or areas even brighter than they would be under good natural lighting Use SLOW only in dark environments W1 SLOW 4X the shutter speed is set to 1 15 of a second to quadruple the sensitivity X2 SLOW 10X the shutter speed is set to 1 6 of a second to provide ten times the sensitivity Note that images take on a strobe like effect If the manual focus indicator blinks adjust focus manually
44. ectly from standard household power The Adapter Charger operates on 100 240 volts 50 60 Hz To AC power outlet os DC OUT Jack DC IN Jack DC Cable Attaching the Adapter Charger Removing the Adapter Charger 1 Connect one end of the DC cable 1 Unplug the Adapter Charger from to the DC OUT jack on the the power outlet Adapter Charger 2 Remove the DC cable from the 2 Connect the other end of the DC Adapter Charger and camcorder cable to the DC IN jack on the Using an Optional Plug Adapter camcorder 3 Plug the Adapter Charger s plug An optional plug adapter might be into an AC power outlet required in some countries 100 240V 50 60Hz 1 Plug the adapter charger s plug into the AC plug adapter CAUTION OTE Never use this Adapter Charger gt tami for any purpose other than EHE charging the 247800 battery 7 pack or the optional BB46L or gt Optional AC AC 100 240V in conjunction with the DC gt a7 Plug Adapter cable to supply power to the camcorder 2 Plug the AC plug adapter into the AC outlet 11 Using the Rechargeable Battery The battery must be charged as described on the next page before it can be used the first time Initial charging takes approximately 90 minutes When fully charged the battery supplies approximately 75 95 minutes of operating time depending on how much the monitor zoom and pause are used Conserve battery power by turning the camcorder off duri
45. educes picture interference A core filter is supplied with this digital camcorder Attaching the Core Filter to an Optional S Video Cable 1 Release the stoppers on both ends of the Core Filter and open Stoppers 2 Run the cable through the Core Filter leaving approx 1 4 inches of cable between the cable plug and the Core Filter casing 1 1 2 S Video Cable a RS 3 Wind the cable once around the outside of the Core Filter Make sure not to leave slack in the cable 74 4 Loop the cable back through the Core Filter casing 5 Close the Core Filter until it clicks shut The S Video cable is now ready for use Note When working with an S Video cable attach the end with the Core Filter to the camcorder A Accessories 3 57 AC battery charger 58 carrying case 57 order form 60 rechargeable battery 57 remote control 58 tripod 59 Adapter Charger 3 11 58 attaching 4 11 removing 11 Assistance 3 Audio Video Cable 3 Auto Focus 45 Automatic Recording AutoShot 5 B Battery 3 9 12 attaching 12 care and storage 14 charging 13 life 14 removing 12 using 12 Battery Levels Indicator 24 Battery Release Button 9 C CAM RESET 37 Camcorder care and maintenance 69 care and storage 70 cleaning 69 exchange warranty 3 focusing 45 operating tips 56 repair or exchange 71 resetting factory defaults 37 things to avoid 70 CAMERA Icon 38 39 40 41 Camera Menu 29 37
46. eees 68 Care and Maintenance 69 After Using the Camcorder 69 Cleaning The Camcorder 69 Proper Care and Storage 70 Things to Avoid sesser 70 Customer Assistance and Service 71 Warranty 32 015 ccicaeeientneee 72 Working With the Core Filter 74 Index enel ts tees 75 Assistance The toll free numbers are available to help with any problem you may encounter Camcorder Exchange Warranty s s s 800 283 6503 pages 72 73 Customer Service ccccsccccsecsessesecsecsessessene 800 336 1900 page 71 ACCESSOTICS e E A N 800 338 0376 pages 57 62 Getting Started This section describes the steps necessary to set up your camcorder to record Refer to the other sections for detailed operation and feature options 1 Unpack the camcorder and accessories Save all packing materials and box in case the camcorder ever needs to be shipped or stored The items shown are packed with the camcorder If any pieces are missing or appear damaged contact your dealer immediately Remove the plastic film that covers the front and side logos on the camcorder Use a fingernail not anything sharp to remove 2 Pras Core Filter for Optional Lithium ion Battery S Video cable Part No 247800 see page 74 for details C Caution 0 Never use the adapter charger for any purpose other than charging the 247800 battery pack or the optional BB46L or for AC Adapte
47. ement for the included IEEE 1394 connection cable Used to attach the digital camcorder to a IEEE 1394 equipped computer with a digital video capture board installed 244268 DC Cable Replacement for the included DC cable Used to attach the digital camcorder to the adapter charger 249645 A V Cable Replacement for the included A V cable Used to attach the digital camcorder to an external component like a TV or VCR Using the Optional AC088 Tripod Mounting the camcorder on a tripod such as ACO88 keeps the camcorder steady and produces excellent video results This tripod s fluid effect head provides smooth camera pan and tilt The quick release mount makes it easy to attach or remove the camcorder The grooved tubular 3 section leg design folds down to 26 when not in use Rubber feet allow for sure footing Cautions Before using a tripod make sure it is stable enough to hold the camcorder without falling over Do not SAPON the camcorder attached to the tripod ni When attaching your amiorder to a tri ee be carefull not to force the tripod screw into the camcorder s tripod mounting hole The tripod screw should not protrude into the camcorder more than approximately three eighths 3 8 of an inch Forcing the screw could damage the mounting hole on the bottom of the camcorder Accessories Order Form Model CC9370 Description Part No Price
48. ess in the MENU BRIGHT dial to set the exposure adjustment EXP and the highlight bar on the plus or minus indicator disappear To Return to Automatic Exposure Control Select AUTO in step 2 or set the Power Switch to automatic 2 record Notes To brighten the subject quickly press the BACKLIGHT button on top of the camera this is also the rewind button The A icon is displayed and the subject is brightened If pressed again disappears and the brightness returns to the previous level A 3 exposure value has the same effect as using the backlight button Using backlight may cause the light around the subject to become too bright and the subject too overexposed Backlight compensation is also available in automatic record mode manual exposure control is not Pressing the backlight button has no effect when exposure is set to MANUAL Iris Lock The iris controls the amount of light that enters the camcorder Use Iris Control in the following situations When shooting a moving subject When the distance to the subject changes so its size in the LCD monitor or viewfinder changes such as when a subject is backing away When shooting a reflective natural background such as at the beach or when skiing When shooting subjects under a spotlight When zooming When the subject is close keep the iris locked Even when the subject moves away from the camcorder th
49. est SR number from the telephone representative before returning your equipment to avoid delays accounting errors or even loss of your unit Important information to customers who ship defective equipment to Thomson Consumer Electronics The Thomson representative who authorized the return of your equipment will give you an SR number over the phone They will also provide you with instructions on where and how to return your camcorder Write the number in large clear characters on the outside of the box To avoid confusion and misunderstandings shipments without an SR number clearly visible on the outside of the box will be returned to you at your expense Include a brief note describing the problem and any conversations about the problem you have had with Thomson personnel Include your name address and model serial number of the camcorder These numbers are located on the bottom of the camcorder If the camcorder is within the warranty period please provide a copy of the bill of sale to verify purchase date Use the original box and packing material to protect the equipment from damage in shipment For your protection insure all shipments for full replacement value and use a reliable shipper Thomson assumes no responsibility for warranty shipments from the customer to the factory if not shipped in the manner prescribed by Thomson 71 What your warranty covers Any defect in materials or workmanship
50. ewing 11 Press the camcorder s Play Pause Button P I to begin playback Note The camcorder and some TVs have an S Video Jack which can be used for a better image quality f using an optional S Video Cable it must have a core filter to meet FCC requirements 31 Capturing Recordings to a VCR Using A V Input Jacks Connector cover Open when connecting cables AN Connection Cable Included with Camcorder VCR AN Jacks Note Can be on front or rear of VCR Yellow Plug White Plug VIDEO IN LAUDIO IN Red Plug R AUDIO IN Connecting the Camcorder to a VCR Using A V Input Jacks 1 Locate the A V cable that came with the camcorder 2 Make sure all units are turned off 3 Connect the white plug of the A V cables to the VCR s Left AUDIO IN jack L AUDIO IN 4 Connect the red plug of the A V cables to the VCR s Right AUDIO IN jack R AUDIO IN Note Some VCRs do not offer both left and right audio jacks f your TV only has one audio jack use the A V cable s white plug for audio 5 Connect the yellow plug of the A V cables to the VCR s VIDEO IN jack 52 6 Open the camcorder s Connector Cover 7 Connect the A V Connection Cable s single plug into the camcorder s A V Jack 8 Press in the Thumb Lock and rotate the Power Switch to playback arm mode 9 Turn on the VCR 10 Tune the VCR to its video input channel for viewing
51. f dark scenes with no picture brightness AGC the overall appearance may be grainy but the image is bright AUTO A the shutter speed is automatically adjusted 1 30 1 200 of a second Shooting a subject in low or poor lighting at 1 30 of a second provides a brighter image than in the AGC mode but the subject s movements are not as smooth or natural The overall appearance may be grainy When the shutter is automatically adjusted the Ax icon appears in the LCD or viewfinder 4 Press in the MENU BRIGHT dial to activate the choice 5 To exit menus rotate the MENU BRIGHT dial to highlight RETURN Press in the MENU BRIGHT dial twice to return to normal viewing Tally Light The tally light on the front of the camcorder comes on to signal the start of recording You can turn this light on or off Turning the Tally Light On or Off 1 Rotate the MENU BRIGHT dial to highlight the CAMERA MENU icon R1 Press in the MENU BRIGHT dial to highlight the submenus 39 2 Rotate the MENU BRIGHT dial to highlight TALLY Press in the MENU BRIGHT dial to display the submenus 3 Rotate the MENU BRIGHT dial to highlight either ON or OFF 4 Press in the MENU BRIGHT dial to activate the choice 5 To exit menus rotate the MENU BRIGHT dial to highlight RETURN Press in the MENU BRIGHT dial twice to return to normal viewing ID Number In order to connect the camcorder to a device such as a vi
52. hile in Twilight mode the light will not activate 2 To replace the video light It is Video Light recommended that you consult your nearest camcorder dealer 44 Camcorder Focus Your digital camcorder can be set to automatically focus images or you can manually set the focus Auto Focus The full range auto focus system offers continuous shooting ability from close up as near as approximately 2 inches from the subject to the horizon Correct focus may not be possible when Two subjects overlap in the same scene Illumination is low The subject has no contrast difference in brightness and darkness such as a flat one color wall or a clear blue sky e A dark object is barely visible in the viewfinder A scene contains minute or identical patterns that are regularly repeated The scene is affected by sunbeams or light reflecting off the surface of a body of water Shooting a scene with a high contrast background Note The amp 4 a and amp Dud icons are low contrast warnings that appear on screen and blink when there is a problem with illumination or contrast Focus detection zone Focus indicators tell whether the camcorder is focusing on the foreground or background Notes If the lens is smeared or blurred accurate focusing may not be possible Keep the lens clean wiping it with a soft cloth When condensation occurs wipe lens with a soft cloth o
53. ial to display submenus 3 Rotate the MENU BRIGHT dial to highlight either ON or OFF 4 Press in the MENU BRIGHT dial to activate the highlighted choice 5 To exit menus rotate the MENU BRIGHT dial to highlight RETURN Press in the MENU BRIGHT dial twice to return to normal viewing Time Code The time code stamp helps determine where the cassette is positioned A time code is always recorded but does not appear on the image itself only on screen If a recording starts at a blank portion of the tape the time code begins counting from 00 00 00 minute second frame If a recording starts from the end of a previously recorded scene the time code continues from the last time code number If a blank portion of a tape is left part way through a recording the time code is interrupted When recording resumes the time code starts counting again from 00 00 00 42 Accessing Time Code Settings l Rotate the MENU BRIGHT dial to highlight the DISPLAY MENU icon E Press in the MENU BRIGHT dial Rotate the MENU BRIGHT dial to highlight TIME CODE Press in the MENU BRIGHT dial to highlight the submenus Rotate the MENU BRIGHT dial to highlight either ON or OFF Press in the MENU BRIGHT dial to activate the highlighted choice To exit menus rotate the MENU BRIGHT dial to highlight RETURN Press in the MENU BRIGHT dial fwice to return to normal viewing Clock Adjustment To Set the Current Date and Time
54. ie t Rotate the MENU BRIGHT dial to highlight the DISPLAY MENU icon Press in the MENU BRIGHT dial Rotate the MENU BRIGHT dial to highlight CLOCK ADJ Press the MENU BRIGHT dial to highlight the submenus Rotate the MENU BRIGHT dial to change numbers Press in the MENU BRIGHT dial to advance to the next field Repeat as necessary To exit menus rotate the MENU BRIGHT dial to highlight RETURN Press in the MENU BRIGHT dial fwice to return to normal viewing Recording Details To get the most out of your camcorder make sure to review this chapter Here you will find out about the camcorder s built in color enhancement light about focusing and about Snapshot mode Video Light To brighten the scene when natural lighting is too dim the camcorder uses a built in video light The video light can be turned on at all times set to turn on automatically when the camcorder senses additional light is needed or turned off altogether Setting the Video Light 1 Press and hold the OPEN HERE latch and open the LCD monitor This reveals the LIGHT OFF AUTO ON switch 2 Move the switch to the desired setting OFF turns off the light AUTO Automatically allows the camcorder to turn on the light when there is insufficient lighting on the subject ON keeps the light on at all times as long as the camcorder is turned on Notes The video light can only be used when the camcorder is on It is
55. ighlight the submenus 2 Rotate the MENU BRIGHT dial to highlight TELE MACRO Press in the MENU BRIGHT dial to display the submenus 3 Rotate the MENU BRIGHT dial to highlight ON Press in the MENU BRIGHT dial to activate your choice 4 To exit menus rotate the MENU BRIGHT dial to highlight RETURN Press in the MENU BRIGHT dial twice 35 Wide Mode Caution Do not use wide screen modes unless you have a compatible 16X9 TV When played on a regular TV CINEMA mode creates black bars in the picture The camcorder lets you make recordings compatible with the 16X9 wide screen format When Wide Mode is activated the camcorder records black bars at the top and bottom of the picture to produce the wide screen effect This is also known as letterbox recording 1 Push in the thumb trigger and rotate et the Power Switch to manual M record 2 Press in the MENU BRIGHT dial to display the on screen menus 3 Rotate the MENU BRIGHT dial to highlight the MANUAL icon M Press in the MENU BRIGHT dial to select it MA MANUAL MENU E RETURN DIS TELE MACRO OFF WIDE MODE A WIND CUT CAM RESET 4 Rotate the MENU BRIGHT dial to highlight WIDE MODE Press in the MENU BRIGHT dial to select it 36 Rotate the MENU BRIGHT dial to highlight OFF CINEMA or SQUEEZE Select OFF to record in normal mode suitable for standard TVs yer
56. in use Before handling the camcorder make sure your hands and face are free from any chemical products such as suntan lotion as it might damage the finish The camcorder might be damaged by improper storage or handling Do not subject the camcorder to swinging shaking or dropping Do not store the camcorder in temperatures below 22 F 30 C or above 149 F 65 C When the camcorder is not in use always remove the cassette and AC adapter charger or battery Retain the original carton for future storage or shipping purposes Things to Avoid Do not attempt to disassemble the camcorder There are no user serviceable parts inside Avoid operating the camcorder immediately after moving it from a cold location to a warm location Give the camcorder 1 1 2 to 2 hours to reach a stable temperature before inserting a cassette Incold to warm conditions 70 condensation might occur causing the tape to stick to the recording heads and damage the camcorder or cassettes Never aim the camcorder at the sun or other bright objects Do not leave the camcorder in direct sunlight for extended periods of time The resulting heat buildup might permanently damage the camecorder s internal parts Do not operate the camcorder in extremely humid environments Do not operate the camcorder near the ocean as salt water or spray might damage the internal parts of the camcorder Do not operate the camc
57. ingle plug to the camcorder Adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on If you have a TV or speakers that are not specially shielded do not place the speakers next to the TV as interference will occur in the camcorder playback picture Viewing Recordings on a TV Using A V Input Jacks Connector cover TV Open when connecting cables AN Jacks Note Can be on A V Connection Cable front Or TOAT SETY Included with Camcorder Yellow Plug White Plug VIDEO IN LAUDIO IN Red Plug R AUDIO IN Connecting the Camcorder to a TV Using A V Input Jacks 1 Locate the A V cable that came with the camcorder 2 Make sure all units are turned off 3 Connect the white plug of the A V cables to the Left AUDIO IN jack L AUDIO IN 4 Connect the red plug of the A V cables to the Right AUDIO IN jack R AUDIO IN Note Some TVs do not offer both left and right audio jacks If your TV only has one audio jack use the A V cable s white plug for audio 5 Connect the yellow plug of the A V cables to the VIDEO IN jack 6 Open the camcorder s Connector Cover 7 Connect the A V Connection Cable s single plug into the camcorder s A V Jack 8 Press in the Thumb Lock and rotate the Power Switch to playback qm mode 9 Turn on the TV 10 Tune the TV to its video input channel for vi
58. is reduced at longer focal lengths When the focus level cannot be adjusted any further or closer amp or a will blink 46 Snapshot Feature The Snapshot feature captures still images that look like photographs recorded onto a cassette Note When pressing the SNAPSHOT button in every mode except Multi 4 or Multi 9 a camera shutter sound effect can be heard To Select a Snapshot Mode 1 Press the Thumb Lock in and rotate the Power Switch to record either Ef or M 2 Choose the appropriate Snapshot mode from the five available by pressing the camera s MODE button until the desired effect appears on screen SNAPSHOT button MODE button FRAME places a snapshot within a frame FULL no frame takes a snapshot with e MULTI 4 takes four snapshots in a quick progression giving the illusion of movement and places all four images within one shot e MULTI 9 takes nine snapshots in a quick progression giving the illusion of movement and places all nine images within one shot PIN UP places a snapshot on top of a shadow effect The image and shadow are placed within a frame Digital and Optical Zooming You can zoom in and out for close up or wide angle shots just by moving the zoom lever on the c
59. ital Zoom does gt Inthe Menu screen set ZOOM to 40X or 250X not work pages 38 39 Disengage the VIDEO ECHO mode page 31 Wait until the Picture Wipe or Dissolve effects are completed pages 29 30 Program AE with special effects and Set the Power Switch to manual m record Fade Wipe effects page 5 do not work The Black amp White ce does not Turn off Sepia and or Monotone effects page 31 work The Dissolve Turn off Sepia Monotone or Slow Shutter before function does not adding Dissolve to a scene transition page 31 work Set WIDE MODE to CINEMA or OFF pages 36 37 Make sure you have selected the mode of Program AE with special effects you want before starting editing pages 31 32 64 Checks and Adjustments The Picture Wipe Select Picture Wipe or Dissolve before recording and or Dissolve functions do not work The Video Echo mode does not work Even when Slow Shutter is not selected the image looks like it is There is no strobe when the Classic Film or Strobe mode is activated White Balance cannot be activated During recording the date time does not appear The indicators and messages do not appear Images on the LCD monitor appear dark or whitish The effects are then automatically activated pages 29 30 The camcorder automatically shuts off after five minutes in Record Standby mode Make sure you continue using the camcorder within five mi
60. lay The approximate time remaining on a recording tape is displayed on screen Time Remaining Display 17 Display Menu Options The Display Menu offers a chance to set what is shown on screen during recording and playback You must set the correct date and time before they can be displayed in either mode Setting the Date and Time The correct date and time must be set before they can be displayed Date and time information is recorded onto the tape at all times but its display can be turned on or off during playback see Displaying information on the camcorder or TV on the next page for details 1 18 With a power supply attached press in the Lock Tab and rotate the Power Switch to manual M Press in the MENU BRIGHT dial to display the camcorder s on screen menus The FADER WIPE menu Gu is the default display MME FADER WIPE EE D LEI P WIPE SCROLL EP WIPE SHUTTER R RANDOM OFF Wl FADER WH ITE Bx FADER BLACK X FADER MOSAIC 10 Rotate the MENU BRIGHT dial to highlight DISPLAY MENU Press in the MENU BRIGHT dial to display a series of submenus Rotate the MENU BRIGHT dial to highlight CLOCK ADJ Press in the MENU BRIGHT dial to select the choice and display time and date information The month is highlighted Rotate the MENU BRIGHT dial to display the correct month Press in the MENU BRIGHT dial
61. matically Wait until the holder recedes completely before closing the cassette holder cover Slide the BATTERY RELEASE button and remove the battery pack OPEN EJECT switch Cassette holder cover PUSH HERE BATTERY RELEASE button Cleaning The Camcorder l Clean the exterior wiping gently with a soft cloth For heavy dirt use diluted mild soap and wring the cloth well Then wipe again with a dry cloth Open the LCD monitor page 22 and wipe it gently with a soft dry cloth Close when done To clean the lens blow it with air using a blower brush Wipe gently with lens cleaning paper To clean the viewfinder raise it to the vertical position Carefully open the cover on the bottom of the viewfinder Pa p DENE Insert a lens blower or soft cloth into the gap to clean the interior Cover Lens blower Close the cover and tilt the viewfinder back to the horizontal position Notes Avoid using strong cleaning agents such as alcohol Cleaning should be done only after the power supply has been disconnected Mold may form if the lens is left dirty When using a cleaner or chemically treated cloth refer to the cautions of each product 69 Proper Care and Storage Keep dirt from entering the camcorder s cassette door Dust and grit are abrasive and cause excessive wear to both the recording playback heads and cassettes Always cap the lens when the camcorder is not
62. mber demonstration mode and side LED settings El MANUAL MENU adjustment of image stabilization tele macro focus wide mode wind cut and camera reset settings ff DISPLAY MENU adjustment of on screen displays date and time time code stamp and clock adjustment settings 4 When the desired icon is highlighted press in the MENU BRIGHT dial to display the menu s choices Rotate the MENU BRIGHT dial to highlight the desired submenu selection Fader Wipe Effects These effects create professional looking scene transitions Note Some fade wipe effects cannot be used with certain types of PAE special effects If an unusable fade wipe effect is selected its indicator blinks or goes out l Highlight the FADER WIPE icon by rotating the MENU BRIGHT dial Press the MENU BRIGHT dial in to highlight the submenus Use the MENU BRIGHT dial to scroll through available options wi FADER WHITE fadesin or out using a white screen Be FADER BLACK fades in or out using a black screen 29 30 FADER MOSAIC fades in or out with a tile like mosaic effect FADER B W fades into color from black and white or fades out from color to black and white WIPE CORNER wipes in from black from the upper right to the lower left or wipes out from lower left to upper right leaving a black screen WIPE WINDOW starts in the center of black and wipes out towards the co
63. mcorder s lens of up to 10 times or 10X Selecting Zoom Mode 1 Rotate the MENU BRIGHT dial to highlight the CAMERA MENU icon R1 Press in the MENU BRIGHT dial to highlight the submenus 2 Rotate the MENU BRIGHT dial to highlight ZOOM Press in the MENU BRIGHT dial to display the submenus 3 Rotate the MENU BRIGHT dial to highlight the desired setting u 10X the maximum optical zoom If the camcorder is using digital zoom and then is set to 10X zoom mode the magnification will reset 40X allows use of digital zoom By digitally processing and magnifying images zooming is possible from 10X the optical limit to 40X 250X allows use of digital zoom By digitally processing and magnifying images zooming is possible from 10X the optical limit to 250X 4 Press in the MENU BRIGHT dial to activate the choice 5 To exit menus rotate the MENU BRIGHT dial to highlight RETURN Press in the MENU BRIGHT dial twice to return to normal viewing Gain Up This camcorder allows you to adjust the shutter speed to compensate for various recording settings Setting Gain Up 1 Rotate the MENU BRIGHT dial to highlight the CAMERA MENU icon RJ Press in the MENU BRIGHT dial to highlight the submenus 2 Rotate the MENU BRIGHT dial to highlight GAIN UP Press in the MENU BRIGHT dial to display the submenus 3 Rotate the MENU BRIGHT dial to highlight the desired setting OFF allows shooting o
64. mcorder is lost or stolen you will be able to identify it Use extra care to avoid damage to your camcorder and accessories when operating them at a beach or pool Spray sand and dust should be avoided If your lens has been exposed to the elements clean it only with proper lens cleaning supplies Make sure you have any plug adapters that you might need before taking your camcorder to other countries Consult your dealer for advice Carry your camcorder in a carrying case when traveling See the next page for a case designed especially for this camcorder An ordinary suitcase or carry bag does not offer the protection your camcorder needs Treat your camcorder as carry on luggage to protect it from rough handling Optional Accessories We invite you to take a look at some great ideas for sparking creativity and adding to the fun of using your digital camcorder The following pages have a selection of accessories to help make your memorable moments look and sound even better These accessories are designed to make the process of recording and watching your videos more enjoyable To order accessories contact your local Dealer If a dealer is not nearby all accessories are available through toll free ordering or by using the order form found on page 61 AC201A Soft Carrying Case 247800 Rechargeable Battery Ly Lf This rechargeable 2 hour lithium ion battery is designed specifically for long life depending on how
65. ng recording breaks Attaching a Charged Battery If the DC cable is attached to the camcorder remove it before attaching the battery 1 Lift the viewfinder 2 Slide the battery into the back of the camcorder Make sure the arrow diagram on the battery points down so the contacts on the battery and camcorder match 3 Turn the Power Switch to record M or amp The power indicator lights 12 Battery Release Button Safety Precautions Do not short the battery s terminals 200 Do not attempt to gt disassemble or modify the battery No user gt serviceable parts are inside re ae Use the battery only with specified adapter lt chargers and _ camcorders Throwing the battery into a fire or exposing it to excessive heat over 149 degrees F 65 degrees C could be hazardous Removing a Battery Press and hold the BATTERY RELEASE button Slide the battery up and out to remove Charging the Battery If the DC cable is attached to the DC OUT jack on the Adapter Charger remove it Make sure the arrow on the battery faces up and points to the Adapter Charger s POWER light Hold the battery flush against the Adapter Charger and slide it in the direction of the arrow Plug the Adapter Charger into the nearest AC power outlet 100 240V 50 60Hz If the battery is properly connected the CHARGE indicator blinks N
66. nt PHOTO Appears when a snapshot is being taken Snapshot Indicator 2 Exposure Adjustment Icon Appears when the exposure is adjusted 20 Appears when the iris is locked Iris Lock Indicator 26 Recording Mode Indicators or M 4 Special Effects Indicator a Image Stabilization Indicator en Wind Cut Mode BRIGHT L_L 1 Bright Sound Indicator ad Manual Focus Indicator DEC 25 00 PM 5 30 Date Time Indicator TC 23 25 Time Code Display Displays the selected Program AE with special effects icons Appears when Digital Image Stabilization DIS is activated The icon blinks or goes out when DIS is activated but cannot be used Appears when wind cut mode is engaged to reduce the noise created by wind BRIGHT displays the brightness of the LCD monitor SOUND displays the sound mode for approximately five seconds after the camcorder is turned on Appears when the focus is adjusted manually Displays the date and time briefly when the camcorder is turned on Displays the time code Playback Mode Indicators PLAY 12BIT SOUND1 Lip Sound Mode Indicator LP Tape Speed Indicator Displays the sound mode either 12 or 16 bit Displays the playback tape speed either SP or LP 27 Playback Mode Indicators PLAY gt Playback Indicator lt lt Rewind Indicator Tape progress indicators appear on screen Fa
67. nutes after pausing a tape page 26 Disengage Slow Shutter mode page 31 or set WIDE MODE to OFF page 36 37 before using Picture Wipe effects Set WIDE MODE to CINEMA or OF F pages 36 37 Do not use Video Echo during a fade in or fade out page 31 If you want the lighting to look more natural set GAIN UP to AGC or OFF page 39 Do not try to use the Classic Film or Strobe modes during a scene transition page 31 Turn off Sepia or Monotone before setting White Balance page 31 Set DATE TIME to ON page 42 When the LCD monitor is turned to face forward page 22 date and time do not appear In the Menu screen set ON SCREEN to LCD or LCDITV page 41 and set TIME CODE to ON page 42 Adjust the brightness and angle of the LCD monitor page 22 65 The back of the LCD monitor is hot The LCD monitor or viewfinder indications blink Play rewind and fast forward do not work The tape is moving but there is no picture Images on the LCD monitor are jittery Blocks of noise appear during playback or there is no playback picture and the screen becomes blue The LCD monitor viewfinder and or lens are dirty ex fingerprints An unusual icon appears on screen 66 Checks and Adjustments Close the LCD monitor to turn it off or set the Power Switch to OFF and let the camcorder cool down page 22 This can occur in certain conditions including using Fade
68. o comply with the limits for a Class B Digital Device in accordance with the specifications in Part 15 of the FCC rules These rules are designed to provide reasonable protections against radio and television interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause interference to radio or television reception which you can determine by turning the equipment off and on try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna that is the antenna for the radio or television that is receiving the interference Change the position of the Camcorder with respect to the radio or television equipment that is receiving interference Move the Camcorder away from the equipment that is receiving interference Plug the Camcorder into a different wall outlet so that the Camcorder and the equipment receiving interference are on different branch circuits If these measures do not eliminate the interference please consult your dealer or an experienced radio television technician for additional suggestions Also the Federal Communications Commission has prepared a helpful booklet How To Identif
69. ode 16 Still Playback 50 STOP Button 9 T Table of Contents 1 Tally Light 9 39 Tapes Mini DV 16 Tele Macro Focusing 35 Thumb Trigger 9 Time Code 42 display 20 Time Remaining Display 17 Tips recording 56 traveling 56 Tripod 59 Trouble Checks 63 TWILIGHT 31 V Variable Shutter Speed 31 1 100 31 1 250 31 1 500 31 1 60 31 VIDEO ECHO 31 Video Light 43 44 Viewfinder 9 23 focusing 23 using 23 W W and T Zoom Lever 47 W BALANCE 29 Warranty 72 78 White Balance Adjustment 33 automatic 33 manual 33 Wide Mode 36 Wind Noise 37 cutting 37 WIPE DOOR 30 WIPE SLIDE 30 WIPE WINDOW 30 Z Zoom Lever 47 volume control 9 Zoom Mode 38 10X 38 250X 38 40X 38 digital interpretation 38 selecting 38 Zooming 47 digital 47 optical 47 zoom lever 47 FCC Declaration of Conformity and Industry Canada Information FCC Regulations state that unauthorized changes or modifications to this equipment may void the user s authority to operate it This device complies with part 15 of FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation This Class B digital apparatus complies with the Canadian ICES 003 Cet appareil num rique de la Classe B est conforme a la norme NMB 003 du Canada This equipment has been type tested and found t
70. oducts or is used for institutional or other commercial purposes e Batteries for remote control and clock Cleaning of video audio heads e Camcorders purchased or serviced outside the U S A e Return transportation storage and handling costs of your unit including insurance for loss or damage Acts of God such as but not limited to lightning damage Product Registration e Please complete and mail the Product Registration Card packed with your camcorder It will make it easier to contact you should it ever be necessary The return of the card is not required for warranty coverage How State Law relates to warranty e This warranty gives you specific legal rights and you also may have other rights that vary from state to state If you purchased your camcorder outside the United States This warranty does not apply Contact your dealer for warranty information Service calls that do not involve defective materials or workmanship are not covered by this warranty Costs of such calls are the sole responsibility of the purchaser 73 Attaching a Core Filter to an Optional S Video Cable Your digital camcorder and some TVs and video units have an S Video jack S Video provides excellent video transfer abilities not sound You can purchase an S Video cable at many retail electronics stores When using an S Video cable it must have a Core Filter attached to meet FCC requirements The Core Filter r
71. order for extended periods in temperatures below 40 F 4 C or above 95 F 35 C Do not expose the camcorder or adapter charger to rain or moisture If any component becomes wet turn off the power and take the unit to an authorized RCA camcorder service provider Do not use an adapter charger or batteries other than the ones specified for the camcorder Using the wrong accessories might cause damage to the camcorder You can reach Thomson at the following number 800 283 6503 Toll free inside U S A Our toll free camcorder number operates from 8 a m to 5 p m CST Monday Friday for U S customers only Thomson provides a toll free telephone number to help with any problems encountered with the camcorder Many problems can be diagnosed over the phone but if necessary repair or replacement will be arranged Have the camcorder s model serial number and date of purchase ready when you call for faster service If your unit is out of warranty we will quote the cost of a repair or replacement unit to you Returning equipment to Thomson for repair or exchange If we are unable to resolve your problem over the phone we will gladly service your unit or exchange it for a new or refurbished camcorder Refer to the limited warranty on the reverse side to learn about your specific rights and responsibilities Always consult Thomson and get a Service Request number before returning anything Obtain a Service Requ
72. orward Button Zoom Lever Controlling Speaker Volume Slide the Power Zoom Lever VOL towards to turn up the volume or towards to turn down the volume Notes If stop mode continues for five minutes when power is supplied from a battery the camcorder shuts off automatically to conserve power To turn the camcorder on again set the Power Switch to OFF then to back to playback mm mode The playback picture can be viewed in the LCD monitor viewfinder or on a connected TV LCD monitor viewfinder indications When power is supplied from a battery the icon is displayed When power is supplied through the DC cord the lt icon does not appear When a tape is stopped no indicators are displayed When a cable is connected to the Audio Video jacks no sound is heard from the speaker 49 Still Playback Mode Still playback pauses the tape freezing a single frame on the display Activating Still Playback 1 Press the Play Pause Button P II during playback to freeze the image 2 To resume normal playback press the Play Pause Button again If still playback continues for more than a few minutes the camcorder s stop mode is automatically engaged After approximately five minutes in stop mode the power turns off to conserve power When the Play Pause Button is pressed the image may not freeze immediately The camcorder takes a moment to stabilize the still image Shuttle Sear
73. r Charger Supplying power to the Part No 247801 camcorder IEEE 1394 eo Connection Cable Audio Video Cable Part No 249644 Part No 249645 Part No 244268 Adjust the handstrap to fit your hand A Lift the flap on the handstrap and separate the Velcro strip B Insert your hand so your fingers can comfortably reach the camera buttons C Adjust the strap to fit snugly D Refasten the strap and fold the flap back down Handstrap Velcro Strip Handstrap Under Flap Attach the adapter charger Since the battery must be charged before it can be used the first time attach the adapter charger to the camcorder using the included DC power cable fo ACoutlat 100 240 50 60 Hz Adapter charger model 247801 G DC cable HA iy k eee DC OUT jack DC In jack A Connect one end of the DC C Plug the adapter charger s cable to the DC OUT jack on plug into a working power the adapter charger outlet B Connect the other end of the DC cable to the DC in jack on the camcorder 4 Press in the Lock Button and rotate the Power Switch to automatic record The Power Indicator lights when Power indicator the camcorder is turned on The position of the Power Switch determines whether the camcorder is in automatic A or manual M record mode powered off OFF or in playback mode PLAY Automatic recording places the camcorder into AutoShot mode Focus exposu
74. r manual M record Appears when a tape reaches its end during recording or playback Appears if a tape in another format is loaded Appears briefly after the power is turned on to either automatic or manual record mode and the lens cap is still attached Appears when the date and time are not set Appears when the built in clock battery runs out and the previously set date time is erased Consult your nearest RCA service center for replacement Appears when in automatic H record mode Displays the fade wipe effect in use see pages 29 30 for details about fade and wipe effects 25 Recording Mode Indicators W Appears when the camcorder is in 16x9 mode Wide Frame Indicator wide screen SP Display of the set recording speed either Tape Speed Indicator Standard Play SP or Long Play LP Displays the approximate zoom ratio during zooming 40X AcK appears when GAIN UP is set to Zoom Rako AUTO and the shutter speed is automatically adjusted WCET is the zoom lever indicator Appears when back lighting compensation is epee a turned on Back Lighting Indicator REC PAUSE REC appears during recording Record Pause Indicators f PAUSE appears during Record Standby gt eee aa ppears when a tape is running Active Tape Indicator gt gt 1 Appears when white balance is adjusted White Balance Adjustme
75. r wait for it to dry naturally When shooting a subject close to the lens zoom out first If you zoom in auto focus mode the camcorder may automatically zoom back out depending on the distance between he camcorder and the subject This will not occur when TELE MACRO is activated 45 Manual Focus Follow these steps to focus the camcorder s lens manually 1 Adjust the viewfinder s Diopter Adjustment Control to assure that the viewfinder s image is crisp 2 Press in the Thumb Lock and rotate the Power Switch to manual M record 3 Press the FOCUS button also the fast forward pP button on top of the camcorder The manual focus indicator amp _ ad appears on screen 3 To focus on a subject further away rotate the MENU BRIGHT dial clockwise towards The icon appears on screen and blinks To focus on a subject near the camcorder rotate the MENU BRIGHT dial counterclockwise towards The 4 icon appears and blinks 4 Press in the MENU BRIGHT dial To Reset Auto Focus Press the FOCUS button PP twice or set the Power Switch to automatic H record If FOCUS gt p is pressed once the camcorder will enter the Focus Adjustment mode again Notes Be sure to focus the lens in the maximum telephoto position when using manual focus If you focus in on a subject in wide angle position sharply focused images cannot be obtained when zoomed on because the depth of field
76. rd both monitors are turned on For convenient viewing rotate the viewfinder up or down Cautions Never force the viewfinder to rotate completely around This will damage the viewfinder and or the camcorder When carrying the camcorder with the shoulder strap put the viewfinder down to help prevent possible damage to it from bumping against your body Focusing the Eyepiece The Diopter Adjustment Control on the underside of the viewfinder focuses the eyepiece s display allowing for individual vision needs If you wear eyeglasses you may be able to operate the camcorder without them by using the Diopter Adjustment Control Diopter Adjustment Control To set the correct focus concentrate on one of the icons in the on screen menus 1 Adjust the eyepiece for comfortable viewing 2 Press in the MENU BRIGHT dial to display the on screen menus 3 Concentrating on the icons turn the Diopter Adjustment Control until they come into focus Note The eyepiece focus control does not affect the focus of the image captured by the camcorder 23 On screen Indicators Several displays appear on the LCD monitor or in the viewfinder to aid in the operation of the camcorder Although it may look crowded all of the icons shown below do not appear on screen at the same time Also not all screen icons are shown in the illustration Refer to the icon descriptions that follow BRIGHT DEC 25 0
77. re iris control white balance and the recording light are controlled by the camcorder during automatic recording Note Many special effects do not operate in AutoShot mode see pages 31 32 for more information Manual M recording mode allows you to control many of the camcorder s special features Note The camcorder automatically turns off to save battery power if left Power Switch in record pause mode for more than five minutes Set the Power Switch to OFF then back to automatic or manual record mode to turn back on 5 Set the Light AUTO ON OFF switch to AUTO Open the LCD monitor by pressing and holding the PUSH LCD monitor OPEN latch then rotate the monitor outward Note Opening the LCD more than 25 degrees automatically turns it on turns off the image in the viewfinder With the light switch set to AUTO the Video Light automatically turns on when more light is needed LIGHT switch UGH atch OFFRUTA 6 Insert a Mini DV cassette s Record protection tab A Make sure the camcorder is connected to a power supply i y Tape window B With the camcorder set to automatic E1 record slide and hold the OPEN EJECT latch Gently pull the cassette cover open until it snaps into place The cassette holder automatically opens C Insert a Mini DV cassette with the record protection tab facing up and the tape window facing out Note The
78. rners or comes in from the corners gradually wiping to the center WIPE SLIDE wipes in from right to left or out from left to right WIPE DOOR two black halves wipe open left and right or close from left and right WIPE SCROLL the scene wipes in from bottom to top or wipes out from top to bottom WIPE SHUTTER wipes in from the center of black toward the top and bottom or wipes out from top and bottom toward the center DISSOLVE the new scene gradually appears as the old one gradually disappears WIPE CORNER new scenes wipe in over previous ones from the upper right to lower left WIPE WINDOW new scenes gradually wipe in from the center of previous ones to the corners WIPE SLIDE anew scene will gradually wipe in over the previous one from right to left WIPE DOOR the previous scene wipes out from left and right like a door being pushed open to reveal the next scene WIPE SCROLL new scenes wipe in over previous ones from bottom to the top WIPE SHUTTER new scenes wipe in over the preceding one from the center toward top and bottom RANDOM when activated the camcorder randomly selects the effect used for transitions Picture wipe dissolve is not available Program AE with Special Effects Your digital camcorder offers a variety of special effects to add a professional touch to recordings Note Program AE with special effects can be changed during recording or during r
79. s to how accurate color is reproduced under various lighting conditions If the white balance is correct all other colors will be reproduced correctly as well White balance is usually adjusted automatically Users who want more control over this function though can manually adjust the camcorder s white balance settings 1 Press in the Lock Button and rotate the Power Switch to manual M record 2 Press in the MENU BRIGHT dial to display the on screen menus 3 Rotate the MENU BRIGHT dial to select the W BAL icon m Press in the MENU BRIGHT dial to display the submenus 4 Rotate the MENU BRIGHT dial to highlight the desired setting AUTO white balance is automatically adjusted by the camcorder w MAN white balance is set manually outdoors sunny day we outdoors cloudy day video lighting is used 5 Press in the MENU BRIGHT dial to make the selection Returning to Automatic White Balance In step 4 select AUTO or set the Power Switch to automatic K record Note Manual white balance cannot be used when Sepia or Monotone special effects are in use 34 Manual White Balance Operation 1 To set the white balance to manual control follow steps 1 4 in the previous section then select the MAN option 2 Hold a sheet of plain white paper in front of the subject Adjust the zoom or move the camcorder so that the white paper fills the screen 3 Press in the MENU BRIGH
80. sette holder door before the holder comes out may damage the camcorder Even when the camcorder is turned off a cassette can still be loaded or unloaded After the cassette holder is closed with the camcorder switched off though it may not recede Turn the power on before loading or unloading cassettes When recording once the cassette holder door is open a blank portion will be recorded on the tape or a previously recorded scene will be taped over regardless of whether the tape holder came out or not Loosen the grip strap if it appears to interfere with the cassette holder door operation Care and Storage When finished with a cassette rewind it remove it from the camcorder and label it Protect the tape using the erase protection tab if necessary Store cassettes vertically in their protective cases at normal room temperatures Never leave the camcorder or cassettes in a car or outdoors for an extended period of time Excessive heat or cold might damage cassettes Keep cassettes away from strong magnetic fields such as electric motors speakers and other devices Keep dust from entering the cassette compartment All dust is abrasive and causes excessive wear on the cassette and the camcorder s recording and playback heads Never use cassettes with damaged or spliced tape Do not use a cassette if it has been damaged or exposed to moisture The tape might jam and or damage the camcorder Time Remaining Disp
81. sing 35 Manual White Balance operation 34 Menu Options 18 displaying camcorder 18 TV 18 MENU BRIGHT Dial 7 9 10 21 29 35 Menus accessing 29 Microphone 9 Mini DV 16 Missing Cassette Warning Indicator 24 25 MODE Button 10 46 MULTI 4 Snapshot Feature 47 MULTI 9 Snapshot Mode 47 O On Screen Displays 41 On screen Indicators 24 On Screen Preferences 18 OPEN EJECT slider 9 switch 6 Optical Zoom 47 P PIN UP Snapshot Mode 47 Play Pause Button 9 Playback 8 49 basic 49 frame by frame 50 options 49 shuttle search 50 speeds 16 still 50 Plug Adapter 11 Power Indicator 9 Power Switch 5 7 automatic recording 5 lock button 5 manual recording 5 Power Zoom Lever volume control 49 Product Registration 2 Program AE 30 Program AE Effects 30 Push Here 6 PUSH OPEN Button 9 R RANDOM 30 Rechargeable Battery 57 Record Protection Tab 6 Recording 43 details 43 icon 7 mode 38 playing back 8 speeds 16 starting stopping 7 time 17 tips 56 Remote Control universal 58 Rewind Button 9 S S Video Cable 74 Safety Precautions 12 Shoulder Strap 3 attaching 15 ring 10 Shuttle Search 50 Side LED 41 SLOW 10X 31 SLOW 4X 31 Snapshot Feature 46 button 46 Full 46 Multi 4 46 MULTI 9 47 PIN UP 47 Sound dubbing 54 mode 38 SP mode 38 Speaker 10 Speaker Volume 49 Special Effects 30 Specifications 68 Speeds and Times recording and playback 16 SQUEEZE Mode 36 77 Standard Speed SP M
82. st Forward Indicator after the corresponding button on top of the T camcorder has been pressed Playback Pause Indicator li gt Forward Slow Motion Indicator lt li Reverse Slow Motion Indicator BRIGHT Displays the brightness of the LCD monitor VOLUME E SOUND displays the speaker volume Bright Sound Display The level indicator moves to reflect an increase or decrease in volume TC 10 06 20 Time Code Display Displays the recorded time code DEC 25 00 PM 5 30 Displays the date time Date Time Display 28 Your digital camcorder has a variety of modes to choose from to achieve recordings with professional results You can change detailed settings using the camcorder s on screen menu system Accessing Menus 1 Press in the Thumb Release and rotate the Power Switch to manual M record Press in the MENU BRIGHT dial to display the on screen menus EE FADER WIPE EE tej IP WiPE SCROLL Sp WiIPE SHUTTER BA RANDOM OFF FADER WH1TE Bd FADER BLACK E FADER MOSAIC Rotate the MENU BRIGHT dial to highlight the desired menu function to allow FADER WIPE adjustment of transition effects P AE EFFECT setting special effect functions I EXPOSURE setting exposure values and iris lock E W BALANCE adjustment of white balance settings or setting manual white balance CAMERA MENU adjustment of recording speed sound mode zoom gain up tally computer ID nu
83. the LCD monitor is open or closed To adjust the volume use the Zoom Lever also labeled VOL More information about using the LCD monitor and viewfinder can be found on pages 22 23 E Press the Stop Button W on top of the camcorder when finished playing back the tape 10 Turn off the camcorder Press in the Lock Button and rotate the Power Switch to OFF 11 Close the LCD monitor Power Indicator Pressing the Thumb Trigger will start or pause recording Playback buttons on top of the camcorder include Stop W Rewind 44 Play Pause ID and Fast Forward PP Reviewing Operating Controls Zoom Lever also Volume Control in PLAY mode MENU BRIGHT Dial OPEN EJECT Latch AN Computer and S Video Connection jacks under rubber hood Hand Strap Battery Power Indicator Battery Release Button Thumb Power Switch Fast forward Button PP Play pause Button p I Rewind Button 44 STOP Button W PUSH OPEN Button tay Light Video Light Microphone Reviewing Operating Controls LCD Monitor open Service Port Light Switch OFFIAUTO ON MENUIBRIGHT SNAPSHOT Dial Button Cassette Holder Carriage NEVER touch internal pieces Cassette Holder Cover Door MODE PRESS HERE Cassette Button Holder Closing Point 10 Using the Adapter Charger The Adapter Charger attaches to the camcorder and lets you power your camcorder dir
84. what your warranty covers and explains how to get service Checks and Adjustments T No power is Connect the AC adapter charger securely page 4 supplied Replace the dead battery with a fully charged one pages 12 14 SET DATE Set the date time pages 18 19 TIME appears Consult your nearest camcorder dealer for replacement Recording cannot Set the tape s erase protection tab to REC be performed Set the power switch to automatic or manual record B or m Replace with new cassette Close the cassette holder cover There is no Turn the camcorder s power off and on again picture page 5 Some functions Set the Power Switch to manual record are not available page 5 using the MENU BRIGHT dial The focus does not Set focus mode to the Auto page 45 adjust Clean the lens and check the focus again page 69 automatically The cassette will not load properly 63 The cassette will not Set it in the right position page 6 load properly Install a fully charged battery pages 2 4 or connect the camcorder to the AC Adapter page 4 Make sure to use only Mini DV cassettes page 16 Snapshot mode Turn off Squeeze mode in the MANUAL MENU cannot be used pages 36 37 The color of Snapshots looks Turn off Sepia and or Monotone effects page 31 brownish orange The image taken using Snapshot is Press the BACKLIGHT Button page 33 too dark Dig
85. when the correct month is shown to advance to the day entry Repeat the procedure to select the correct day Following day is the year then hour and finally the minute Note You must rotate through all 12 hours to change a m times to p m After advancing through all of the time and date settings and CLOCK ADJ is the only highlighted item rotate the MENU BRIGHT dial to highlight RETURN Press in the MENU BRIGHT dial to return to the main menu icons To exit the menus and return to normal viewing press in the MENU BRIGHT dial when the END icon a is highlighted Note For different date time display options see the following instructions You can proceed to make changes to other DISPLAY MENU items or highlight and select RETURN and then END menu selections to exit the menus and return to normal record viewing Displaying Information on the Camcorder or TV I With a power supply attached press in the Lock Tab and rotate the Power Switch to manual M record The power indicator lights Press in the MENU BRIGHT dial to display the camcorder s on screen menu system EE FADER WIPE EE P WIPE SCROLL EP WIPE SHUTTER PR RANDOM OFF W FADER WH ITE Bk FADER BLACK FADER MOSAIC Rotate the MENU BRIGHT dial to highlight the DISPLAY MENU icon Press in the MENU BRIGHT dial to select the choice Press in the MENU BRIGHT dial again to select ON
86. y and Resolve Radio TV Interference Problems This booklet is available from the U S Government Printing Office Washington D C 20402 Please specify stock number 004 000 00345 4 when ordering copies For more information on FCC conformity Thomson Consumer Electronics Inc 10330 N Meridian St Indianapolis IN 46290 1 800 587 5850 This Page Left Blank Intentionally This Page Left Blank Intentionally THOMSON CONSUMER ELECTRONICS 10330 N Meridian Street Indianapolis IN 46290 2000 Thomson Consumer Electronics Inc Trademark s Registered Marca s Registrada s Printed in Japan TOCOM 15604110 Part Number LYT0634 001A VP

Digital Ca_corder

Contents

Download Pdf Manuals

Related Search

Related Contents