SMP 6250
Contents
1. 2 Side rails There are four side rails on the bed for the safety of the patients The side rails prevents the patient from falling out of bed and to avoid from external factors The safe carriage capacity of each side ral is 75 kg Opening Closing the side rail To lower the side rail pull the red latch to release the side rall and letit fold down To raise the side rail pull the lowered side rail upward In both movements the side rail locking mechanism becomes active automatically 3 5 3 Manual CPR handle To lower the backrest manual in an emergency situation pull the handle located at the back of the backrest downward Use this application to lower the patient s back in an emergency situation 3 54 Central locking system To activate the central lock simply push down on brake pedal located at the end of the bed Pushing the pedal down will lock all the wheels and prevent the bed from moving To release the central brake use your foot to lift the pedal Releasing the central brake will allow the bed to move freely 3 6 Head Foot Boards The head and foot boards are designed to protect the patient from the environmental effects and increase the comfort of the patient These boards are removable and can be installed easily To remove the head foot baords simply pull on them by holding the top part and the boards will pop out of their holders To install the head foot boards align the holes located at the bottom of the boards with the hold2. IONS WARNING Backrest incline Backrest decline Legrest incline Legrest decline Fowler position increase Fowler position decrease Height increase Height decrease Trendelenburg 12 10 Reverse Trendelenburg 12 pesprebpr MAKE SURE THERE IS NOTHING AND NOBODY ESPECIALLY CHILDREN UNDER AND NEAR THE BED WHEN OPERATING THE FUNCTIONS OF THE BED Fam 20803 GE USER MANUAL ICU BED SMP 6250 3 2 Side rail controls Fowler position increase Fowler position decrease Legrest incline Legrest decline Height increase j Height decrease Backrest incline puana wyp Backrest decline 3 3 Nurse Control Panel FUNCTIONS FAAAAA EVVYVVE Fam ROSES IE USER MANUA ICU BED SMP 6250 3 4 Weight Scale Accuracy Scaling Display screen Aulo compensation Reset Unit change Enabling Enabling Out of bed volume adjustment Out of bed alarm 3 5 Manual Controls Some of the features of the bed do not require electrical functionalities hence they can be adjusted manually 3 51 Legrest adjustment mechanism Legrest movement is done by the help of a graded mechanism Upholding the legrest is enough to uphold the graded mechanism To lower again uphold the legrest and then let it down The legrest will come to straight position Fam ROSE USER MANUA ICU BED SMP 6250 35
3. Solutions Start Here SMP 6250 Solutions Start Here www smpcanada com SMP Canada 10 Sims Crescent Richmond Hil Ontario L4B 1K9 Canada Tel 805 764 7767 Fax 1 866 627 9798 suppor smpcanada com USER amp MAINTENANCE MANUAL ousmgcaradacom sppa empanadason Tek 1908764ISMP SAN Far 12646279798 oS scan mod Ontaria LAB 4 Can GE USER MANUAL ICU BED SMP 6250 ATTENDI C SMP 6250 ICU Bed User amp Maintenance Manual USER MANUAL ICU BED SMP 6250 General Remarks We congratulate you on your choice of a SMP 7000 ELITE ICU bed and would like to thank you for your confidence in our company and its products You have purchased a SMP 7000 ELITE ICU bed developed and manufactured in accordance with the current state of technical knowledge SMP Canada s ICU beds fully meet all safety and operational requirements They are tested in accordance with intemational standard and carry the CE seal This confirms that they fulfill the safety requirements relating to medical products This user manual is intended to give you and your staff practical information and tips on the safe and correct use of the SMP 7000 ELITE ICU bed When putting the bed into service for the first time or wanting to learn about its operation and maintenance one must read and strictly obey this user manual To avoid faulty handling and to ensure trouble free operation of the bed this documentation must be available to caregi
4. ers on the bed frame and simply push down to fix them in place 4 Bed Cleaning Al SMP ICU bed models can be cleaned easily The beds can be cleaned with a damp dry duster Make sure to discharge the patient out of the bed before commencing cleaning of the bed WARNING NEVER USE ACID DISSOLVENT DETERGENT PHOSPHATE OR ANY CHEMICAL INLCUDING PHOSPHATE OR ANY OTHER CORRIVE AGENTS Ps Fam 20803 IE USER MANUAL ICU BED SMP 6250 5 Storage For the long term storage of the bed obey the following instructions Reset all of the adjustments of the bed Be sure that all the wheels of the bed are on a level surface Do not place any other bed or a heavy subject on the bed 6 Troubleshooting PROBLEM TRN SOLUTION The bedisnatrepondngteany 1 The power Wats nat puma 2 Page power nite commands 2 The electric cable ls not working 2 change the electric cable 3 The control box ls not working 3 send the contral box to repair The system E warang bate L The Socket Which Was a connection I Check the descibed soa motor nt working There isa With the control box af the motor is Hi connected or not Felek sound coming from the not connected 2 The motar needs to change contra box 2 The motor is broken call the service 3 The control box is broken 3 The control box needs to change cali the service department The site E workg bate T The control Ban braken T The control Bor Tesir T motor s n
5. ns of the bed should not be used When the patient is on the bed a second person should not sit on the bed Before cleaning the bed or changing any part of the bed always pull the power cable out the plug The patient and the attendant are always in danger in the following situations In the course of taking the bed away from one place to another on crinkled or grungy surface Inthe course of exceeding the safe working weight In the course of placing the moving parts carelessly In the course of being damaged of the power cable Only the approved brands parts should be used When the replacement parts which are provided from the other suppliers are used the bed manufacturer company will not accept responsibility for any damage loss or injury Bed Installation During the installation of the bed please obey the following rules Open the package of the bed completely and carefully Check the bed for the possible damages during the carriage Check the accessories and the main parts of the bed for any deficiency carefully in case of any deficiency contact the service department Before taking action about the bed read the user s manual carefully WARNING DO NOT PUT ANYTHING ON THE BOTTOM FRAME COVER m Fam 20803 USER MANUA ICU BED SMP 6250 3 Bed Usage 3 1 Hand Controller The controller is connected with a flexible cable so the patient and the attendant can use the controller in every position FUNCT
6. ot working No lek 2 The actuator s broken change cali the service Sound is coming fram the control 2 The actuator needs to bor change call the service department The battery i out of charge Wo L The batey 1 completa out af i Charge the battery le sound Is present charge 2 change the battery 2 _ The battery is broken TER TE Bu T The battery is completely auta T harge the bate TE the motors are not moving charge does not help cali the property service department 7 Symbols R ao Aaa A a ee Fam ROSES Safety Waring Weight ICU BED SMP 6250 SER MANUAL 8 Maintenance Inspection Schedule TECHNICIAN NAME SIGNATURE DATE EXPLANATION Fam 308 RS pan
7. vers and or patients at all times Secondary Medical Products Canada Inc SMP Canada 10 Sims Crescent Richmond Hill Ontario L4B 1K9 Canada Tel 1 905 764 7767 Fax 1 866 627 9798 E Mail Info smpcanada com Website waw smpcanada com Fam ROSES USER MANUAL ICU BED SMP 6250 Table of Contents APPENDIX General Remarks 41 Safety Instructions 2 Bed installation 3 Bed Usage 31 Hand Controller a2 Sie rail controls 33 Nurse Control Panel Optional aa Weight Scale 35 Manual Controls 351 Legrest adjustment mechanism 352 Siderais 353 Manual CPR handle 354 Central locking system as Head Foot Boards Bed Cleaning Storage Troubleshooting symbols Maintenance inspection Schedule Fam 3 IE USER MANUA ICU BED SMP 6250 2 Safety Instructions Read the statements with detail and use this product in accordance with these statements If necessary place a copy of these instructions near the product If you notice the product is not working do not use it and contact SMP s technical service right away Inform the patient and the other users about the functions of the product Pay attention the situation of the patient and around before operating the patient bed The safety weight capacity should not be exceeded If there is an obligatory situation to exceed this limit the surface which the patient lies on should be adjusted to lowest position and the functio
Download Pdf Manuals
Related Search