USER MANUAL USER MANUAL
Contents
1. OVERVIEW This camera series is designed to quickly upgrade your surveillance system without the need for re decoration or re wiring This dome camera is equipped with a vari focal lens and its vandal proof feature can withstand external force damages FEATURES 1 3 Color CCD F1 4 Large Aperture f4 0 f9 0mm Vari focal Lens Excellent low lux performance below 0 1 Lux at F1 4 Vandal proof Housing Design IPxx7 v A WU N PACKAGE CONTENT Please make sure you have the following items in your sales package gt Vari Focal Dome Camera with Power and Video Cable 1 gt User Manual 1 SPECIFICATIONS MODEL Vari Focal Dome Camera Pick up Element 1 3 color CCD Number of Pixel 512 H x 492 V lt NTSC gt 512 H x 582 V lt PAL gt Resolution Standard Below 0 1 Lux F1 4 S N Ratio More than 48dB AGC off Electronic Shutter 1 60 1 50 to 1 100 000 sec f4 0mm f9 0mm 75 36 AES White Balance ATW IPxx7 Lens Lens Angle Vandal Proof Rating Video Output 1 0 Vp p composite 750 The specifications are subject to change without notice Dimensional Tolerance 5mm SPECIFICATIONS 512 H x 492 V lt NTSC gt 512 H x 582 V lt PAL gt Paitin O oaa wewe S e The specifications are subject to change without notice Dimensional Tolerance 5mm LENS ANGLE ADJUSTMENT The lens can be panned left or right for angle adjustment maximum 60 respectively2. Black Shield Case Then remove counterclockwise to the end and then take it off it by pressing the two sides and then pulling it outward Dome Cover Y Unscrew Unscrew Black Shield Case Step3 Align the screw holes Step4 Fasten the screws To install the camera firstly aim the front view Fasten the 3 screws to the ideal installation of the camera at your desired securing area position e g on the ceiling or on the wall Then swivel the black rotatable plate to let the Then connect the power and video cable to the power supply and the input of the DVR For details please refer to the CONNECTION section 1st and 2 4 screw holes align with those on the camera base So the 3 one will align simultaneously Screw Holes i Back View 3 Secure the Scrows Front View Note 1 Screws are not supplied with the sales package For installation please purchase the suitable SCrews 2 For safety always let the power and video line concealed behind the installation position Step3 Align the screw holes Step4 Fasten the screws To install the camera firstly aim the front view Fasten the 3 screws to the ideal installation of the camera at your desired securing area position e g on the ceiling or on the wall Then swivel the black rotatable plate to let the Then connect the power and video cable to the 1st and 2 4 screw holes align with those on the power supply and the input of
3. European Union the product must be collected seperately at the product end of life This applies to your product and any peripherals marked with this symbol Do not dispose of these products as unsorted municipal waste CE Mark This apparatus is manufactured to comply with the radio interference The company does not warrant that this manual will be uninterrupted or error free We reserve the right to revise or remove any content in this manual at any time OVERVIEW This camera series is designed to quickly upgrade your surveillance system without the need for re decoration or re wiring This high resolution camera is equipped with a vari focal lens Auto Iris and its vandal proof feature can withstand external force damages FEATURES 1 3 HR Color CCD F1 4 Large Aperture f4 0 f9 0mm Vari focal Lens Auto Iris Supports 0 15 Lux at F1 4 5 Vandal proof Housing Design IPxx7 PACKAGE CONTENT BR WN Please make sure you have the following items in your sales package gt Vari Focal Dome Camera a with Power and Video Cable 1 5 a gt User Manual 1 OVERVIEW This camera series is designed to quickly upgrade your surveillance system without the need for re decoration or re wiring This high resolution camera is equipped with a vari focal lens Auto Iris and its vandal proof feature can withstand external force damages FEATURES 1 3 HR Color CCD F1 4 Large Aperture f4 0 f9 0mm Vari f
4. flat headed screwdriver to loosen the pivots on the lens First adjust the 1st pivot to zoom in and zoom out Zoom Second adjust the 2 pivot to fine tune the focal lens Secure these two pivots after the adjustment is completed Finally fasten the screw on the side of lens to fix the tilt angle after the optimized positioning is achieved Pivots rine i Zoom in and Zoom but Note When adjusting the title angle please do not tilt the camera lens to be more than 90 Step5 Adjust the angle of the camera To adjust the angle of the camera swivel the black rotatable plate from the center to the left or to the right maximum 60 Pan Adjust the tilt angle by moving the lens maximum 90 Tilt Use a flat headed screwdriver to loosen the pivots on the lens First adjust the 1st pivot to zoom in and zoom out Zoom Second adjust the 2 pivot to fine tune the focal lens Secure these two pivots after the adjustment is completed Finally fasten the screw on the side of lens to fix the tilt angle after the optimized positioning is achieved Pivots Fine Zoom in and Zoom but Note When adjusting the title angle please do not tilt the camera lens to be more than 90 Step6 Adjust the blue Light Lever Tuner When the video output is too bright or too dark adjust the Light Level Tuner to get the suitable light level Finally secure the screw on the side of lens to Stabilize the til
5. from the default position CONNECTION 1 DC12V Terminal Connect the power connector of the camera to a DC 12V regulated power supply NOTE Please use a regulated DC12V power adaptor to operate this unit The power tolerance of this unit is DC12V 10 DC 10 8V DC 13 2V A power input of more than the DC 13 2V will damage this unit 2 Connect the camera video output to the input of the DVR with a 75Q coaxial cable LENS ANGLE ADJUSTMENT The lens can be panned left or right for angle adjustment maximum 60 respectively from the default position CONNECTION 1 DC12V Terminal Connect the power connector of the camera to a DC 12V regulated power supply NOTE Please use a regulated DC12V power adaptor to operate this unit The power tolerance of this unit is DC12V 10 DC 10 8V DC 13 2V A power input of more than the DC 13 2V will damage this unit 2 Connect the camera video output to the input of the DVR with a 75Q coaxial cable INSTALLATION Step Remove the Dome Cover Step2 Remove the Black Shield Case Remove the Dome Cover by turning it First unscrew the Black Shield Case Then remove counterclockwise to the end and then take it off it by pressing the two sides and then pulling it outward Dome Cover Y Unscrew p Unscrew Black Shield Case INSTALLATION Step Remove the Dome Cover Step2 Remove the Black Shield Case Remove the Dome Cover by turning it First unscrew the
6. the 1st and 2 4 screw holes align with those on the camera base So the 3 one will align simultaneously Screw Holes Step4 Secure the screws Fasten the 3 screws to the ideal installation position e g on the ceiling or on the wall Then connect the power and video cable to the power supply and the input of the DVR for later adjustments For the details of the connection please refer to the CONNECTION section Secure the Scrows Front View Note 1 Screws are not supplied with the sales package For installation please purchase the suitable SCrews 2 For safety always let the power and video line concealed behind the installation position Step4 Secure the screws Fasten the 3 screws to the ideal installation position e g on the ceiling or on the wall Then connect the power and video cable to the power supply and the input of the DVR for later adjustments For the details of the connection please refer to the CONNECTION section a Secure the Scrows Front View Note 1 Screws are not supplied with the sales package For installation please purchase the suitable SCrews 2 For safety always let the power and video line concealed behind the installation position Step5 Adjust the angle of the camera To adjust the angle of the camera swivel the black rotatable plate from the center to the left or to the right maximum 60 Pan Adjust the tilt angle by moving the lens maximum 90 Tilt Use a
7. the DVR For camera base So the 3 one will align details please refer to the CONNECTION section simultaneously Screw Holes Back View a Secure the Screws Front View Note Step Screws are not supplied with the sales package For installation please purchase the suitable screws Step2 For safety always let the power and video line concealed behind the installation position Step5 Adjust the angle of the camera To adjust the angle of the camera swivel the black rotatable plate from the center to the left or to the right maximum 60 Pan Adjust the tilt angle by moving the lens maximum 90 Tilt Use a flat headed screwdriver to loosen the pivots on the lens First adjust the 1st pivot to zoom in and zoom out Zoom Second adjust the 2nd pivot to fine tune the focal lens Secure these two pivots after the adjustment is completed Finally fasten the screw on the side of lens to fix the tilt angle after the optimized positioning is achieved Pivots on ane focus zoom in and Zoom pu Note When adjusting the title angle please do not tilt the camera lens to be more than 90 Step5 Adjust the angle of the camera To adjust the angle of the camera swivel the black rotatable plate from the center to the left or to the right maximum 60 Pan Adjust the tilt angle by moving the lens maximum 90 Tilt Use a flat headed screwdriver to loosen the pivots on the lens First adjust the 1s
8. 247Z USER MANUAL Dome Camera Series Vari focal dome Please read the instructions thoroughly before using the product AKO15_V1 2 247Z USER MANUAL Dome Camera Series vari focal dome Please read the instructions thoroughly before using the product AK015_V1 2 CAUTION RISK OF ELECTRIC SHOCK CAUTION To reduce the risk of electric shock do not expose this apparatus to rain or moisture Only operate this apparatus from the type of power source indicated on the label The company shall not be liable for any damages arising out of any improper use even if we have been advised of the possibility of such damages The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons This exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance gt gt ROHS Announcement All lead free products offered by the company comply with the requirements of the European law on the Restriction of Hazardous Substances ROHS directive which means our manufacture processes and products are strictly lead free and without the hazardous substances cited in th
9. All lead free products offered by the company comply with the requirements of the European law on the conform Restriction of Hazardous Substances ROHS directive which means our manufacture processes and products are strictly lead free and without the hazardous substances cited in the directive The crossed out wheeled bin mark symbolizes that within the European Union the product must be collected seperately at the product end of life This applies to your product and any peripherals marked with this symbol Do not dispose of these products as unsorted municipal waste CE Mark This apparatus is manufactured to comply with the radio interference mi gt t The company does not warrant that this manual will be uninterrupted or error free We reserve the right to revise or remove any content in this manual at any time OVERVIEW This camera series is designed to quickly upgrade your surveillance system without the need for re decoration or re wiring This dome camera is equipped with a vari focal lens and its vandal proof feature can withstand external force damages FEATURES 1 3 Color CCD F1 4 Large Aperture f4 0 f9 0mm Vari focal Lens Excellent low lux performance below 0 1 Lux at F1 4 Vandal proof Housing Design IPxx7 PACKAGE CONTENT Please make sure you have the following items in your sales package uBR W N gt Vari Focal Dome Camera ka with Power and Video Cable 1 a gt User Manual 1 J
10. aratus is manufactured to comply with the radio interference mi gt t The company does not warrant that this manual will be uninterrupted or error free We reserve the right to revise or remove any content in this manual at any time CAUTION RISK OF ELECTRIC SHOCK To reduce the risk of electric shock do not expose this apparatus to rain or moisture CAUTION Only operate this apparatus from the type of power source indicated on the label The company shall not be liable for any damages arising out of any improper use even if we have been advised of the possibility of such damages The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons This exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance ROHS Announcement All lead free products offered by the company comply with the requirements of the European law on the Restriction of Hazardous Substances ROHS directive which means our manufacture processes and products are strictly lead free and without the hazardous substances cited in the directive The crossed out wheeled bin mark symbolizes that within the
11. e directive T o a Al as L 30 The crossed out wheeled bin mark symbolizes that within the European Union the product must be collected seperately at the product end of life This applies to your product and any peripherals marked with this symbol Do not dispose of these products as unsorted municipal waste CE Mark This apparatus is manufactured to comply with the radio interference mi gt t The company does not warrant that this manual will be uninterrupted or error free We reserve the right to revise or remove any content in this manual at any time CAUTION RISK OF ELECTRIC SHOCK To reduce the risk of electric shock do not expose this apparatus to rain or moisture CAUTION Only operate this apparatus from the type of power source indicated on the label The company shall not be liable for any damages arising out of any improper use even if we have been advised of the possibility of such damages The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons This exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance ROHS Announcement
12. o reduce the risk of electric shock do not expose this apparatus to rain or moisture Only operate this apparatus from the type of power source indicated on the label The company shall not be liable for any damages arising out of any improper use even if we have been advised of the possibility of such damages The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons This exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance gt gt ROHS Announcement All lead free products offered by the company comply with the requirements of the European law on the Restriction of Hazardous Substances RoHS directive which means our manufacture processes and products are strictly lead free and without the hazardous substances cited in the directive A 10 Jan 30 Ei an The crossed out wheeled bin mark symbolizes that within the European Union the product must be collected seperately at the product end of life This applies to your product and any peripherals marked with this symbol Do not dispose of these products as unsorted municipal waste CE Mark This app
13. ocal Lens Auto Iris Supports 0 15 Lux at F1 4 Vandal proof Housing Design IPxx7 PACKAGE CONTENT l 2 3 4 5 Please make sure you have the following items in your sales package gt Vari Focal Dome Camera with Power and Video Cable 1 gt User Manual 1 SPECIFICATIONS Resolution 520 TVL Min tiumination ONS Vari focal Auto Iris Lens f4 0mm f9 0mm The specifications are subject to change without notice Dimensional Tolerance 5mm SPECIFICATIONS Min mumination SSCS A The specifications are subject to change without notice Dimensional Tolerance 5mm LENS ANGLE ADJUSTMENT The lens can be panned left or right for angle adjustment maximum 60 respectively from the default position CONNECTION 1 DC12V Terminal Connect the power connector of the camera to a DC 12V regulated power supply NOTE Please use a regulated DC12V power adaptor to operate this unit The power tolerance of this unit is DC12V 10 DC 10 8V DC 13 2V A power input of more than the DC 13 2V will damage this unit 2 Connect the camera video output to the input of the DVR with a 75Q coaxial cable LENS ANGLE ADJUSTMENT The lens can be panned left or right for angle adjustment maximum 60 respectively from the default position CONNECTION 1 DC12V Terminal Connect the power connector of the camera to a DC 12V regulated power supply NOTE Please use a reg
14. t angle after the optimized positioning is achieved Light Level Tuner Step6 Adjust the blue Light Lever Tuner When the video output is too bright or too dark adjust the Light Level Tuner to get the suitable light level Finally secure the screw on the side of lens to Stabilize the tilt angle after the optimized positioning is achieved Light Level Tuner Step7 Replace the Black Shield Case Replace the Black Shield Case to the camera base Ensure that the Black Shield Case does not cover the lens Black Shield Case NOTE No need to screw the Black Shield Case Step7 Replace the Black Shield Case Replace the Black Shield Case to the camera base Ensure that the Black Shield Case does not cover the lens Black Shield Case NOTE No need to screw the Black Shield Case Step8 Replace the Dome Cover Replace the dome cover to the camera base and turn it clockwise to the end to secure it Dome Cover Step8 Replace the Dome Cover Replace the dome cover to the camera base and turn it clockwise to the end to secure it Dome Cover
15. t pivot to zoom in and zoom out Zoom Second adjust the 2nd pivot to fine tune the focal lens Secure these two pivots after the adjustment is completed Finally fasten the screw on the side of lens to fix the tilt angle after the optimized positioning is achieved Pivots i a focus 2 50m in and Zoom put Note When adjusting the title angle please do not tilt the camera lens to be more than 90 Step6 Replace the Black Shield Case Step7 Replace the Dome Cover Replace the Black Shield Case to the camera base Replace the dome cover to camera base and turn it Ensure that the Black Shield Case does not cover the clockwise to the end to secure it lens Black Shield Case Dome Cover NOTE No need to screw the Black Shield Case Step6 Replace the Black Shield Case Step7 Replace the Dome Cover Replace the Black Shield Case to the camera Replace the dome cover to camera base and turn it base Ensure that the Black Shield Case does not clockwise to the end to secure it cover the lens Black Shield Case Dome Cover NOTE No need to screw the Black Shield Case 248Z USER MANUAL High Resolution Dome Camera vari focal dome Please read the instructions thoroughly before using the product AKO16_V1 1 248Z USER MANUAL High Resolution Dome Camera vari focal dome Please read the instructions thoroughly before using the product AKO16_V1 1 CAUTION RISK OF ELECTRIC SHOCK CAUTION T
16. ulated DC12V power adaptor to operate this unit The power tolerance of this unit is DC12V 10 DC 10 8V DC 13 2V A power input of more than the DC 13 2V will damage this unit 2 Connect the camera video output to the input of the DVR with a 75Q coaxial cable INSTALLATION Step Remove the Dome Cover Step2 Remove the Black Shield Case Remove the Dome Cover by turning it First unscrew the Black Shield Case Then remove it by pressing the two sides and then pulling it outward counterclockwise to the end and then take it off Dome Cover Y Unscrew p Unscrew Black Shield Case INSTALLATION Step Remove the Dome Cover Step2 Remove the Black Shield Case Remove the Dome Cover by turning it First unscrew the Black Shield Case Then remove counterclockwise to the end and then take it off it by pressing the two sides and then pulling it outward Dome Cover Y Unscrew b Unscrew Black Shield Case Step3 Align the screw holes To install the camera firstly aim the front view of the camera at your desired securing area Then swivel the black rotatable plate to let the 1st and 2 4 screw holes align with those on the camera base So the 3 one will align simultaneously Screw Holes Step3 Align the screw holes To install the camera firstly aim the front view of the camera at your desired securing area Then swivel the black rotatable plate to let
Download Pdf Manuals
Related Search