Home

IP CCTV Solution Central Management System User Manual

1. IP CCTV Solution Central Management System User Manual Copyright Copyright Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 _ E mail sales telexper com A member of VisionSoft http www telexper com Copyright Notice Information in this document is subject to change without notice Telexper International Inc may make improvements or changes in this manual and CMS Software if necessary The software which includes the information contained described in this document is furnished under a license agreement and may be used or copied only in accordance with the terms of the agreement Itis against the law of copyright to duplicate the software except as specifically allowed in the license agreement No part of this manual may be reproduced or transmitted in any form or by any means including photocopy or duplicate for any purpose without prior written permission by Telexper International Inc Fe CE This device complies with Part 15 FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation Safety Instructions Warnings amp Cautions Please read the following safety warnings and keep this manual in a
2. HIZ CH C R8485 C Noise Reduction UO Device Change RTSP Login Info l S Username Password Alarm Notification Buzzer Audi Audio File Duration Sec Motion Alarm d Default Sensor Alarm IT Default Loss Alarm Fi Default Search Refresh Alarm when device is disconnected device auto detect For the first time login CMS will detect automatically and display all devices on the screen If it is not the first time launch the previous connected devices will show on the Device List 1 Device Auto Detect This is the default setting of the system search Search button detects and adds new devices to the Device List Refresh Refresh button updates the Device List and removes unavailable devices There will be many kinds of devices of the LAN Devices such as Video Server P Camera Video Matrix Decoder and Network Video Recorder etc Please note that all settings of the unavailable devices will be deleted 59 Oo BB eS IP Security Solutions Provider o mm Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA D E mail sales telexper com osr A member of VisionSoft http www telexper com ISO 9001 2008 Click on each device to edit its settings including name functions image quality and alarm Click Save to confirm the update and
3. Uplink POE 4 POE 3 POE 2 POE 1 AC 90 265V i Uplink 10 100 1000Base TX uplink ports for connect with the Wan LAN POE 1 4 10 100 1000Base TX with POE injectors AC Input for connected with power cable Range 90V 265V Model nHub 12P Product Front View The states of the LED Double Green lights Giga LAN Left Orange Right Green light Mega LAN Notes Power Provision Max DC48V 300mA per each port IP Security Solutions Provider Beet tty Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Ki Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA E mail sales telexper com A member of VisionSoft http www telexper com SO 9001 2008 Model nMD H Product Front View Product Rear View HDMI output IR connector VGA output Embedded Linux Platform Properties Provide H 264 video stream decode service VGA D SUB and HDMI video output connector Real time image decode 30fps could display by full screen and quad screen High resolution D1 or CIFx4 Support POE function CMS could provide monitoring sequence display alarm display and etc functions ao oS wP S Could work independently with only cameras with or without CMS server 14 IP Security Solutions Provider Reet tt Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886
4. Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 E mail sales telexper com http www telexper com General Note for Device Setting 1 Please ensure the device has been connected to the internet during this setup 2 DNS server will assign a Domain Name amp Port Number for you automatically and show on the main page as below WAN Infomation Domain Name 00404250053C homeplus tii_net Port Number 34007 DNS Register NO 3 It takes 20 to 30 seconds to upload the modified settings to the device The background color of device status list will become the color GRAY during uploading period and back to WHITE after completing the upload Reset Device button to reset the network parameters of the selected device back to default 45 wie et IP Security Solutions Provider ett Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City S Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 ENA ae E mail sales telexper com os A member of VisionSoft http www telexper com SO 9001 2008 Batch Setting This function enables user to synchronize multiple devices with the same settings at once Using the mouse and the Control key to select multiple devices and click i to enter the set up page Static IP 192 168 Late zu SUbMask Unlock Mew Port
5. SEEESSEEEE wt J Telexper International Inc d 3F 3 No 2 Chien Pa Rd Chung Ho City OTE ni Taipei 235 Taiwan R O C d WA RRE Tel 886 2 6620 5898 Fax 886 2 6620 6909 EA SC E mail sales telexper com s A member of VisionSoft http www telexper com ISO 9001 2008 Chapter 8 CMS Playback Mode Playback function is only available when there is connecting with the NVR or Local CMS W ss d server we 2010 12 15 17 28 21 d Ey 5 8 7 PD 08 8 SS NoNumber 1 1 7 VGA ih 1 3M KH 2M 1 ih 2M 2 M NoNumber 2 C K Camera 01 E H CCD NVP2120 Faraday YGA Gs Local view NEE Start Time Group BY auto vi ae 2010 11 11 15 28 24 End Time 2010 11 17 17 34 08 CTU PT ree vy aes be Su gel 4 ae Speed La Camera 01 2010 11 11 15 31 38 H Camera 04 2010 11 11 15 31 35 E When you click the Playback button on the control panel on the top of Live View Screen it does pop up the window for you to select Play NVR Records Play Local Records Exit Then the CMS server will connect to the video recording database and display all the recorded video flies of the cameras from NVR or Local server 84 IP Security Solutions Provider eet Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA IKA D E mail sales telexper com A member of Visi
6. 3 Click Update to start updating 47 e IP Security Solutions Provider e Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 USAS D E mail sales telexper com SS A member of VisionSoft http www telexper com ISO 9001 2008 Chapter 5 CMS General Operations Getting Started CMS Login CMS Central Management Server Software A h Double click the CMS shortcut icon to begin the software d CM Then there will be a window pop up key in username and password on it User name Kc p Default Username admin Tie Default Password 99999999 _ Change Password Keyboard Press Keyboard button the On Screen Keyboard will be enable for input BE File Keyboard Settings Help BS ro radrailrid psq 1 brk C dlilelslalslsl elo o brs fins ned pug 7 t falelelrlelrlulilolelrli y Lada 7 3 s ZG It Lavite als le Sc Let Urteel UL ki BBE ctrl alt aa Ss alt ctrl a En ie For the first time login CMS will detect automatically and display all cameras on the main screen After the first time login go to Thay Setup click Search and Refresh to detect and update new devices 48 o BEEE Peete IP Security Solutions Provider WW ULC Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6
7. Camera Video Quality Setup On the Video Quality section you could adjust Brightness Contrast Hue Color or Sharpness to the scene environment Option Check the box of Video Loss Detection to detect any video loss Check the box of Audio In to enable receiving sound from the camera Check the box of Audio Out to enable transmitting sound to the camera Motion Setup Motion Setup Motion 1 Click imi to frame the motion area Left click on the screen and move the cursor to frame the desired area for motion zone Each Camera can be set up to four 4 detection zones You can adjust the zone size and drag it to the desired position 2 Select the detection zone you want to delete and click A to delete it 3 Adjust the sensitivity of the detection 1 10 Sensitivityi4 10 highest sensitivity 62 a E IP Security Solutions Provider ETO Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 D E mail sales telexper com oe A member of VisionSoft http www telexper com ISO 9001 2008 Alarm In and Alarm Out Setting 1 Insert name and check Enable box This name will be shown on the E map 2 For Alarm In Setting click NC button to switch to NO when needed Alarm In Name Installed Enabled 30 to preset Alarm Out Mame d Enabled I O Device Click the sg Device w
8. QO Lock Static IP New PWO Unlock GatevVvay Update UidPwd vase iP les Update IP Port 43 IP Security Solutions Provider Beet tt Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 UKAS D E mail sales telexper com 047 A member of VisionSoft http www telexper com ISO 9001 2008 Static IP Port Setting Static IF Port Settings DHCP Tout ID Static IP i927 168 6 3 GateWay fe 168 6 254 SubMask 255 255 255 0 New Port 34000 L IP Lock Update port zech Set up DHCP Timeout value 0 to disable DHCP Key in the assigned IP Port setting for the selected device Check the IP Lock box to lock the IP settings gt oe IY Click Update IP Port to save the settings IP Lock We tore Lock For locking the current IP settings you may directly check on the Lock Unlock bobble and then click Update User ID Password Setting LIVE Settings IF Lock New UID Lock Default Username admin New PWO Unlock Default Password 99999999 Update Uic Pad l Update DNS Server Registration Setting We have DNS servers located in different locations around the world to serve the customers at NO COST DNS Register Settings DNS Register Hc w n B 44 H CC a BRRRR DRRSRR IP Security Solutions Provider ETO A member of VisionSoft
9. Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 dg E mail sales telexper com os A member of VisionSoft http www telexper com SO 9001 20 08 IP Components Refer to Ch2 Hardware Introduction for details Support b BS S Support by Commander Hybrid Station Network Camera v Vv CCD series 1 3 Sony 520TVL CCD Sensor NTSC PAL Wide Dynamic CCD series 1 3 Sony 520TVL WDRCCD Sensor NTSC PAL VGA IP Camera series 1 4 Micro VGA CMOS Sensor 1 3Mega Pixel IP Camera series 1 3 CMOS Sensor 2 Mega Pixel IP Camera series 1 3 CMOS Sensor Video Server v v nVS 1P 1ch H 264 Video Server with POE function nVS 1 1ch H 264 Video Server nVS 4P 4ch H 264 Video Server with POE function nVS 4 4ch H 264 Video Server nVS 16 Slim 16ch H 264 Video Server Gigabit POE Hub v v nHub 4P 4 ports 10 100 1000Base TX Hub with POE function nHub 12P 12 ports 10 100 1000Base TX Hub with POE function RS485 Controller V v nGPIO Each device provides the Video Server additional four set of the control unit could use to connect four different alarm input and out put devices Video Decoder nMD H POE Video Decoder with Full Quad Matrix video display up to HDTV resolution included OSD IR remote control and RS485 device connection Multiple Network Video Server v x nVS 32 48 64 high density video encoder Video Recorder v x nVR 4 8 4 8 HDDs support up to max 64 recording channels ch record
10. e anana 46 O SBSmnEE eee ttt IP Security Solutions Provider SSSSS5S555858 A member of VisionSoft Firmware Update current firmware of camera Telexper International 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 KA E mail sales telexper com http www telexper com ISO 9001 2008 to access to firmware update page Another window will display the Mac Address IF Address Version Froqress 004042600105 192 168 6 5 SE LEE Ze QU40A 600054 192 165 6 6 rat EE Sie JU40A2 500625 192 168 6 13 See AER QOU40A2S005E 197 166 6710 AS er Een LEE Se QU40A275003EF 192 168 6 15 Ales Wie Uo JU40A2 500636 192 168 66 14 lr Lo 0040425005E9 192 168 65 11 Aee RE e OU40A 75006C3 192 168 6 3 Ales Eto UU40A27S00620 192 168 66 16 erleben EP Ze QU40A 500630 197 166 6186 E E QU40A27S005F3 147 166 612 ee ae Li OO40A27 50056 1 197 168 6177 leo ts QU40A2 S005F 5 192 165 6 9 Ae Ue Uo 004042601209 197 166 6351 eege E QO40A27BOOFDY 197 168 643 44064 UD OU40A BO1TO 1 197 166 656 kel Eto UU40A BOUTS 197 166 639 44064 0o 004042601195 192 168 65 58 44064 OD QU40A BO1079 197 166 650 A AU D UA UOZAOA 2POUTIU7 14 166 6 54 4404 UA 004042601033 197 166 637 A OG J Inc 1 Select IP devices by checking the checkbox for firmware update 2 Click Open button to select file directory of firmware
11. me Led St lb T S eel oe Gielen ties DALEE HER z rat mb aart Dahe ceee 8 bb ee otee mm 3 gem ees t LU es elo Te e ie LP A J Pre Alarm Alarm 30 sec v C Keep Recording Until End of Alarm Speed Full Speed Recording When Alarm Occured Hard Drive Status Hard Drive Settings Drive Total Space Recorded Space Free Space Max 40 0GB 0 00GB 23GB Full 160 0GB 0 00GB 136GB Full 12 9GB 0 00GB 13GB Full 232 9GB 53 59GB 174GB Full 3 7GB 0 00GB 1GB Full 1 Hard Drive Selection Select the Hard Drive you want to save for recording video audio files CMS will display the Estimated Total Hard Drive Storage automatically 2 Setup Storage Space At least 1GB shall be reserved for REC 3 REC Speed Setting Recording speed 1 30 fps for the cameras 4 Full Speed Recording When Alarm Check on the box to enable Full speed recording 30fps when alarm 5 REC Schedule Setting Draw time bar to schedule and enable video audio REC for each camera Example 08 00 18 00 Sunday REC 76 m IP Security Solutions Provider 1920 21 2 23 ail i d 19 20 21 22 23 2418 19 20 21 22 23 ai P 19 20 21 22 23 Al 18 cos at cee ee cae Sees Gals ete eon H 19 20 21 22 23 24i Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 D E mail sales telexper com og A member of VisionSoft http www tel
12. C Documents and Settings AaronChien Desktop 20101130_CMS2_2 0 61 11 NvrViewer Browse E map H PTZ Controller E Enable PTZ Controller RS232 O TCP O UDP Alarm Schedule 1 a Port COM1 M BaudRate 9600 Ki Handshake None Recording Schedule P Time Settings E Mail Properties of Date and Time User Management C Calibrate NR Time Misc Web Server Advance 7 Enable om Ex http 192 168 0 76 Audio Device Enabled Speakers Microphone and set volumn to maximum Domain 271 CMS Server Copyright C Telexper International Inc 1992 2010 1 Version It will show the version of CMS Language Scroll down the language bar and select the language for the system Snapshot Folder Click Select and choose a folder for the saving the snapshots Click Open to view saved snapshot images 4 Enable PTZ Controller Check on the box for enabling the PTZ controller feature Port Baud rate Time Settings Check on the box to synchronize automatically an internet time server Web Server Check this box to enable web server to connect to CMS Audio Device Check this box and the CMS server will output audio with connected speakers while the CMS server got alarms Domain shows the domain name which this server had registered 81 T E e A eee IP Security Solutions Provider ERREN Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886
13. Hide Cameras on the Live Screen Drag and drop one channel to the Camera Directory to remove channels from the live screen There are two ways to include the channel back to the live screen 1 Double click the camera icon on the Camera Directory 2 Drag and drop the icon back to the live screen Organize Cameras on the Live Screen Drag a channel and drop it on the position on the live screen to re organize the order of the channels 5A wie et IP Security Solutions Provider ett Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 ETA D E mail sales telexper com osr A member of VisionSoft http www telexper com ISO 9001 2008 Shortcut to Device Settings PTZ Moves the mouse to the camera picture then presses down the mouse right key to choose Settings then may enter the camera directly the setting menu enlarges after the camera picture presses down the mouse right key to chooses Move Image then may adjust the picture s display area horizontally press down a time mouse right key then to cancel the towing again Title Faraday YGA Video Control Resolution Picture Quality High Record FPS 5 Mode InDoor Video Source NTSC Video Quality Brightness 0 lt Contrast 40 lt Huef lt m Color 60 lt l Sharpness 40 lt Sense 4 Default Alarm In Name O Installed C En
14. Select one device from the Device List 2 Select alarm type tab Motion Sensor or I O Device 3 Setup Alarm Schedule Draw time bar to schedule alarm activation for each camera Example 08 00 18 00 Sunday REC UR eh Zeie EP EE Ut Tn TEE EY er Us ale UE aE ar fal EA EA a Sun ee 4 Import From Click Import From to apply other camera s schedule to the current selected camera 5 Apply To Click Apply To to apply current camera s schedule to other cameras 15 ap SEES eee IP Security Solutions Provider SESEESEEER Recording Schedule Recording Schedule function is only available when there is connecting with the Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA D E mail sales telexper com osr A member of VisionSoft http www telexper com ISO 9001 2008 NVR f EI KS e 2010 112115 17 26 52 Devices list Clear Import From Apply To o EE Local View gE A a d i see 45 se Ae E LAN Device EK 1 3M WAN Device E Y Camera 01 j E DICK Device Group Ab SEN 9 10 11 12 13 14 15 16 17 18 E map S Alarm Schedule y Recording Schedule E Mail User Management Misc Advance Ue ale Se S be aie als ft EE ee ee ee ee far tr tee ee eee bie folie met i UNO UL a ARE TES kee ale Ue el UNM A RO TI le UF ie szer sro 5 ay be Vi
15. 2 Choose the Install ActiveX Control on webpage then click the Install Button to accept the installation Internet Explorer Security Warning Do you want to install this software Name Pbemotechz cab Publisher Telexper International Inc e More options Install Don t Install By While Files From the Internet can be useful this File type can potentially harm vour computer Only install software From publishers you trust whats the risk 3 When the installation is installed successfully the webpage will refresh automatically and display the login in dialog box ZA RULL Reen wie R m o T EN a KA Ka de e 122 116 169 208 el mlela IS qp Favorites sig Suggested Sites 5 Free Hotmail A3 Remotecms ai mm Page Safety Tools W r DisConneged ver 1 2 2 Username admin Password EK Copyright C Telexper International Inc 199 2 2010 Done Internet Fo 100 e d eet LS o BEENA eee IP Security Solutions Provider WU Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 E mail sales telexper com A member of VisionSoft http www telexper com ISO 9001 2008 4 After the components were be installed complete will pop up a login window Please input the user name and password which is allowed to login into your
16. 2 6620 5898 Fax 886 2 6620 6909 W E mail sales telexper com RE A member of VisionSoft http www telexper com ISO 9001 2008 Advance 2010112115 17 27 38 K el e e Firmware Upgrade epa E FW Path wm 0 Bytes LAN Device a Camera IP Version Progress Update WAN Device i Reset Device Group Si WEN E map Alarm Schedule Recording Schedule E E Mail Disable Windows Taskbar StartMenu and Task Manager User Management Lal Misc z Ha DHCP server present in the network change the network setting to dhcp mode instead of static IP Advance Proprietary Mode RTSP Mode Backup CMS Settings Restore CMS Settings C Power off After System Exited C Show Live Screen Before Login Static IP Default Gateway Preferred DNS Server Alternate DNS Server f Ff Ff oF FF FF Ff Ff FF Ff Ff fF fF Firmware Update You can update the selected cameras with Firmware Update Enter the FW path check the boxes of the cameras you wish to update and then click Update 2 Reset If you encounter IP conflict after LAN setup you may reset your whole system to the initial status Click Reset button to reset the system 3 Disable Windows Taskbar Start Menu and Task Manager Check on the setting to disable the keyboard Windows button disable the Start Menu pop up function and disable the Task Manager function 4 Ifa DHCP server present in
17. 54 192 168 656 254 10 NO 0040A2B01077 homeplus tii net 34054 T 17 MultiPD 192 168 6 37 34000 0040A2801033 192 168 65 37 192 168 56 75 10 NO 0040A2B01033 homeplus tii net 34037 T 17 MultiPD 192 168 65 41 34000 O040A2B00FD8 192 168 56 41 192 168 56 75 10 NO 0040A2B00FD8 homeplus tii net 34041 a 17 MultiPD 192 168 65 48 34000 0040A2B01072 192 168 56 48 192 168 56 75 10 NO 0040A2B01072 homeplus tii net 34048 T 17 MultiPD 192 168 68 42 34000 0040A2B0108B 192 168 6 42 192 168 6 254 10 NO 004042B0108B homeplus tii net 34042 W 17 MultiPD 192 168 6 52 34000 004042801078 192 168 6 52 192 168 6 75 10 NO 0040A2B01078 homeplus tii net 34052 T 17 MultiPD 192 168 56 34 34000 0040A2B801074 192 168 65 34 192 168 656 254 10 NO 0040A2B01074 homeplus tii net 34034 a 17 MultiPD 192 168 6 33 34000 004042601196 192 168 6 33 192 168 6 75 10 NO 0040A2B01196 homeplus tii net 34033 Ta 17 MultiPD 192 168 65 44 34000 0040A2B01194 192 168 65 44 192 168 656 254 10 NO 0040A2B01194 homeplus tii net 34044 Ta 17 MultiPD 192 168 6 29 34000 0040A2B801197 192 168 6 29 192 168 6 75 10 NO 0040A2B01197 homeplus tii net 34029 T 17 MultiPD 192 168 6 38 34000 O040A42B01076 192 168 6 38 192 168 6 75 10 NO 0040A2B01076 homeplus tii net 34038 ta 17 MultiPD 192 168 56 46 34000 0040A42B012C8 192 168 56 46 192 168 56 75 10 NO 0040A2B012C8 homeplus tii net 34046 T 17 MultiPD 192 168 6 57 34000 0040A2801030 192 168 6 57 192 168 56 75 10 NO 0040A2B801030 homeplus tii net 34057 da 17 MultiPD 192 168 56 51 340
18. Buttons Overview ap e pm es E Te e Et y D pa d a pago S EEPk ew 50 est WB o EEEREN eee IP Security Solutions Provider WW UU Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA IKA E mail sales telexper com http www telexper com A member of VisionSoft Live Default mode for viewing the live view of the all camera channels Playback Switch to playback mode please refer to Playback Mode chapter E Map Enable the E Map mode please refer to E Map Chapter Monitor TV Wall Enable the Monitor mode please refer to Monitor Chapter Disable Alarm Notification Disable or enable the alarm sound Snapshot Take a screen photo of currently selected camera screen fu Setup Switch to the CMS Setup page Please refer to the CMS Setup chapter View Log Open the log of System and Alarm list E Alarm List List of the 50 latest alarm messages Click on the highlighted event to acknowledge the alarm A Logout Logout the current to switch to another log in user p Exit Close the CMS server system 51 aaf E mm o EEEE E S E IP Security Solutions Provider ett Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 ENA D E mail sales telexper com A member
19. Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 D E mail sales telexper com RE A member of VisionSoft http www telexper com ISO 9001 2008 Chapter 1 Overview Introduction hank you for using Telexper IP CCTV Solution Please remember that all of our devices provide you the easiest configuration and fastest installation than other products and they should be placed under the IP sharing device that we recommend Router with at least Gigabit IEEE802 3ab or IP Sharing supports DHCP We thank you again for using our products Front end equipments H 264 IP industrial cameras GPIO Video Server Network equipments Gigabit PoE Hub 4 Port 12 Port GigaLAN Optical Fiber dE Ak Back end equipments Central Video Management Software Commander Station NVR Recorder RAID 5 IP TV Matrix IP Security Solutions Provider wnbsbaskbb A member of VisionSoft http Awww telexper com SO 9001 2008 Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA E mail sales telexper com D The Telexper IP CCTV Solution includes below major components 1 Basic Series 16 48ch nCS 16 16ch CMS Station nCS 32 32ch CMS Station nCS 48 48ch CMS Station 2 Ultimate Series 64 2048ch nCS 64 64ch CMS Station nCS 128 128ch CMS Station nC
20. EEE TIET IP Security Solutions Provider nee Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 D E mail sales telexper com SCH A member of VisionSoft http www telexper com SO 9001 2008 Appendix B Warranty Information Telexper International Inc TELEXPER warrants Gigabit POE Hub and Network Commander Station against any defect in material and workmanship under normal use for a period of one year from the date or purchase In the event this product is found to be defective within the warranty period TELEXPER will at its option repair or replace the defective product This warranty is void if a the product was operated or stored under condition of abnormal use or maintenance b if the product is repaired modified or altered unless such repair modification of alternation is expressly authorized in writing by TELEXPER c if the product was subject to abuse neglect lighting strike electrical fault improper packaging or accident d if the product was installed improperly or e if the serial number of the product is defaced or missing f if the attached warranty card is not presented TELEXPER will not under any circumstances be liable for direct special or consequential damage such as but not limited to damage or loss of property or equipment loss of profits or revenues cost of replacement
21. GB 25 eh amp IP Security Solutions Provider lt n Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 D E mail sales telexper com E A member of VisionSoft http www telexper com ISO 9001 2008 9 Click OK on All data on the disk you selected will be deleted Do you want to continue Message from webpage 11 After completion of HDD initializing there will be no letter on the HDD icons on the Physical Device Information e Ee Octet Manage Event Task Setting Logout Help Technologies Ine Rescan Devices Initialize Devices Controller 1 RocketRAID 2340 SATA Controller v1 4 E Model T31500341AS 9VS4CCSO Capacity 1 50 TB Model T31500341AS 9VS4FZ7C Capacity 1 50 TB E Model ST31500341AS 9VS4GP90 Capacity 1 50 TB E Model T31500341AS 9VS4EA9B Capacity 1 50 TB Model T31500341AS 9VS4FRQOS Capacity 1 50 TB SS Model T31500341AS 9VS4G724 Capacity 1 50 TB Sj Model ST31500341AS 9VS4FZCZ Capacity 1 50 TB I Model ST31500341AS 9VS4EZ2RB Capacity 1 50 TB E3 Model 5T31500341AS 9VS4EFTR Capacity 1 50 TB SJ Model ST31500341AS 9VS4FPC5 Capacity 1 50 TB Model T31500341AS 9VS4FCB1 Capacity 1 50 TB I Model ST31500341AS 9VS4FP6L Capacity 1 50 TB E Model ST31500341AS 9VS4FPG4 Capacity 1 50 TB Model T31500341AS 9VS4FPS1 Capacity 1 50 TB E Mod
22. IP Address Port data of the selected device Static Information Show the current Static IP Address of the selected device WAN Information Show the current network parameters of the Dynamic IP network of the selected device Those parameters will be assigned by Telexper DNS servers automatically Domain Name The Domain Name e g 0040A250053C homeplus tii net is used to connect the device remotely via WAN if the device is using the dynamic IP to WAN internet Buttons Descriptions Connect Device 1 Select one device from the Device List and click as i to view directly 2 User name and password are required Default Username admin Default Password 99999999 40 IP Security Solutions Provider eet ttt Aoi F Telexper International Inc j ae s 3F 3 No 2 Chien Pa Rd Chung Ho City i Ae d Taipei 235 Taiwan R O C ws W BH Tel 886 2 6620 5898 Fax 886 2 6620 6909 ENA D E mail sales telexper com osr A member of VisionSoft http www telexper com ISO 9001 2008 3 Once logged in the live view will display as below You may control the PTZ or I O devices by clicking on the small icons or right clicking on the channel The Snapshot function allows user to save the current image as JPG file ver 7 1 2 2 English Snapshot Exit Ue pe gE ge r deinterlace Camera 25 IP Dome ies Alarm BIL EN PT ten Thott BET E EF E z E be Pi i E E K CT E EE jrs ES A e KR
23. IP supported 10 Remote Viewing via 3G handset 2 11 Up to 256 cam CMS available Notes 1 Deduct the dead possibility caused by hard disk failure 2 Support Windows Mobile OS 3G Handset ONLY To avoid the risk of explosion from using incompatible battery please use batteries with the same specifications or recommended by your original supplier or manufacturer Dispose of used batteries according to the instructions 21 HHH BS IP Security Solutions Provider neces Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 UKAS n E mail sal tel f 047 A member of VisionSoft ere ISO 9001 2008 Model nVR 15 15Raid Product Front View Product Rear View Embedded XP Platform Features XP Embedded OS SATA I SATA II Hard Drive Auto Partition Allocation Duplex Operation Compatible with VGA D1 1 3Mega 2Megapixel IP Cameras TMSP 1 Protocol Protection Gives Security Data Leak FREE Raid 0 1 5 Hot Swap for nVR 15Raid 19 Rack Mountable Housing SSS ea SS YS Support up to 64 channels cameras video recording Notice For nVR 15Raid series please don t GREEN hard disk series We recommend to use Seagate hard disk 22 o BEEE Peete IP Security Solutions Provider WW ULC A member of VisionSoft http www telexper com Telexper International Inc 3F 3 No 2 Chien Pa Rd Chu
24. Lal Color6o lt al Sharpness 40y gt sensed Default Alarm In Mame Installed Enabled Options LI a 0 to preset Video Loss Detection Alarm Out L SEN L Harme d Enabled _ Audio Out R5485 Control PTE CH R5405 Noise Reduction IO Device Change RTSP Login Into Username Password Alarm Notification Buzzer Audio Audio File Duration Sech Motion Alarm Default 5 Sensor Alarm al Default Ki J 5 VLoss Alarm d Default e J 5 Apply Save Cancel Title Rename the device Host will update the device name accordingly n a 61 ETIU OE EEE eo IP Security Solutions Provider O DRSRRRRRRg Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 D E mail sales telexper com osr A member of VisionSoft http www telexper com ISO 9001 2008 Video Control Setup You can adjust image quality of each camera on the Video Control section Click the camera icon and then adjust image quality if needed Resolution 1280 x 720 1600x1200 1280x1024 D1 CIF VGA Picture Quality High Normal Low Record FPS 1 2 3 5 15 30 Mode Indoor outdoor Video Source NTSC PAL Mode option is only available for VGA device Video Source option is only available for VGA 1 3M and 2M device 1280 x 720 1600x1200 is for 2 mega Pixel IP camera 1280x1024 is for MEGA Pixel IP
25. Solutions Provider ae 1 Ue EEHEEHE ee EBE O Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 A A D E mail sales telexper com A member of VisionSoft http www telexper com ISO 9001 2008 6 After checking the HDD Status go to Manage then select Device Pe Manage Event Task Setting SHI Logout Help Array Device Spare Pool Logical Device Information Name Type Capacity Cache Policy Sectorsize OS Name Status S Device_1_2 Hard Disk 160 04 GB HPT DISK 0_0 Legacy Physical Device Information Location Model Capacity Max Free 1 1 7T31500341A5 9VS4CCS0 1 50 TB 1 50 TB 1 2 7T31606155V 6RAF9S3B6 160 04 GB 0 00 GB 7 Under Manage page click to enter Initialize Physical Device page Help Tes ae foptes fire Event Setting Logout Manage Rescan Devices ste Devices Controller 1 RocketRAID 2340 SATA Controller v1 4 Device 1 1 Model 57T31500341A5 9V54CC50 Capacity 1 50 TEB E Device 1 2 Model 5731608155V 6RAF9S3B Capacity 160 04 GB Device 1 3 Model S5T3150034145 9VS54GP90 Capacity 1 50 TB 8 Click Select All to select all un initialized HDD and then click to start Manage Event Setting Logout Help Techni s mp fue Initialize Physical Devices E Device_1_2 5731608155V 6RAF9OS3B 160 04
26. VGA outputs is in back of the nCS as below picture 3 WI IP Security Solutions Provider Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 ENA E mail sales telexper com A member of VisionSoft http www telexper com ISO 9001 2008 IP CCTV Installation Diagram For the assembly of the speed dome camera please refer to the complete manual Connect AC 100V or AC24V Connect the nCAM ET using the CAT 6 Ethernet cable to the POE2 POE1 gt 90 965V f hub Power Cord POE 4 POE 3 Connect the nHUB 4P by using the CAT 6 Ethernet cable to nCS 16 Power Cord SSR Bb RE RAR LSRIEIRIEIR 21021851720 Sech Administrative Engineering Engineering Production f Ap Depatment Departmen Departmen Department FEE in 5 i Un ef i i gie deier ct i dessa dnt De GA Lobby Warehouse Demo Room 38 WI IP Security Solutions Provider SEEESSSEER Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City cb PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 UKAS MANAGEMENT ISO 9001 2008 D E mail sales telexper com A member of VisionSoft http www telexper com Chapter4 IP Address Setup Device Setting IP Address Setup Device Setting software is designed specifically for user with complex intern
27. available nVR 15 15Raid Max support 15 HDDs and 64ch record available 15 Raid included Disk Array n E 4 o EE o LL Wl Imoo sees PHHH EAE IP Security Solutions Provider SRRRRRRSRg A member of VisionSoft Features Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA E mail sales telexper com http www telexper com Upgrade any Traditional Analogue Camera to the IP CCTV Solution H 264 amp JPEG Dual type Codec Design No Power Cable to Camera Required Less Maintenance Cost than Analogue System and Reduce minimum 50 of Installation Cost Up to 30pps D1 Resolution Display amp Recording Dynamic amp Static IP supported IP Security Solutions Provider ett Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 ENA EA MENT D E mail sales telexper com lt lt A member of VisionSoft http www telexper com ISO 9001 2008 Chapter 2 IP Component Hardware Introduction Network IP Cameras nCam Series VGA 1 3M 2M High Resolution CCD High Speed Dome Product Front View Product Rear View 8 Alarm In Alarm In 7 Audio Out Alarm Out 6 Audio Gnd Audio Gnd for audio in amp out Audio In DC12V In eet 1 D RS485 RS485 D Notes For nCam Series cameras the pow
28. channel to open the TTL and PTZ control It will allow you to open the device like alarm light etc Snapshot Click the Icon can snapshot the current channel Disable Alarm Notification e Disable or enable the alarm sound Exit gt Click the Exit to close the RemoteCMS 99 IP Security Solutions Provider ao I Telexper International Inc F i Of ar 3F 3 No 2 Chien Pa Rd Chung Ho City a e r 8 Taipei 235 Taiwan R O C ww a WW Tel 886 2 6620 5898 Fax 886 2 6620 6909 D E mail sales telexper com A member of VisionSoft http www telexper com RemoteCMS Screen Playback Mode E1111111 E1135X P Domef2 Culvideo server L1 END4 GA Z 4_9 B a Po Oe eS eee KEE GU EEN MOERS EN Katar wae ISHDA Start Time 2010 11 11 11 16 06 End Time 2010 11 12 11 27 27 4 a Lz aE ET SEE 2010 11 12 11 00 07 Search AVIEXPO video server Li MAGA TAARSE ver 7 3 3 30 SE deg serer Li DAM GA ee 1 Please click the icon on g the RemoteCMS live mode to enter the remote play back mode 2 Select the date time of the recorded video audio by clicking the scrolling arrow 3 Click Search button Search 4 Playback Control Backward Play d d Fast Fast Backward Forward Stop 100 D Ft ES IP Security Solutions Provider SRRRRRRR Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C Tel 886 2 6620 589
29. display of the Live View screen will also jump to display the alarm camera image S Control I O Allow you directly to switch the I O device on and off such as light GPIO Allow you to control the attached nGIPO device RS485 to extend the I O control I O to 4 devices for each nGPIO module The E Map mode has two kinds of the display which due to you might use one monitor or dual monitors for the CMS system For Dual Monitors There will be a separate display of both Live View and E Map screens Administrative Engineering Engineering Production Depatment Departmen Departmen Department 7 e RA E Group 4 E All Cameras 4 Sl S Gel PD Oo sl ale a bbm i SS l F seal as j es bz j zs 5 aN di P SEN aioe ht ees Camera 06 EZV Camera 01 BOOP OEP 1 KA B Business onference Product as EZH Faraday VGA l Y m ae r i at EIVA St i ox Department Room Ss Bnagement Quality ANRO H i S Camera 01 Camera G2 Department BAL Mortos Wis bea ei Lobby So g an Ka IW e H Ga kt au gt i s AA S Be chara Camera 01 gamera 01 Camera 02 A A NI 6 i Ooo Ka Ka j Camera 04 ry jj Sch Camera 04 Warehouse Demo Room 95 IP Security Solutions Provider WW ULC Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 8
30. electric power The effective distance away from the nHub 4P POE Hub is 100 meters IP Security Solutions Provider SEEEEEE Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 ERA D E mail sales telexper com SR A member of VisionSoft http www telexper com ISO 9001 2008 a The states of the Power LED Power tee Red Color Power on when connect with the nHub 4P Gigabit POE HUB OM ES Red Flashiness When the LAN is active pm 1 EREER IP Security Solutions Provider ETO 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C E mail sales telexper com A member of VisionSoft http www telexper com Model nVS 4P Product Front View Product Rear View nVS 4P Back Panel Connector 4 RS485 D RS485 3 DC12V In 4 Gnd 1 DC12V Out Back Panel Connector RSR Definion OO 2 TDF RSA 2 3 DC12V Int connect when if w o PoE 4 Gnd only for 3 DC12 V In 5 1 DC 12W Out DC iV Out only for camera Gnd only for camera 7 3 audiom audio 4 Audio Gnd udio Gnid only for 3 Audio In A Aundio Gnd only for 5 Audio Out S 3 a Notes Oe gt OP T TS A a a Pe Telexper International Inc Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA MEA ISO 9001 2008 illustration 19 Alarm Out
31. of VisionSoft http www telexper com JS 9001 2008 Hot Key Alt Enter Switch the Camera display area to Full Screen s L g H 2010 12 15 17 23 03 No Device No Device picture appears when a camera device has not been installed to this channel or the installed camera cannot be detected by CMS Video Loss Video Loss picture appears when there is a disconnection between CMS and camera or the camera is broken 52 m IP Security Solutions Provider O EREEEEEEEE Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA EA E mail sales telexper com A member of VisionSoft http www telexper com Device Directory T x Cameras 4 All Cameras It will show all cameras which are auto detected by the CMS Camera Py Taiwan Click on the camera icon to view live video display on the right te E L001 1 sia ANVR Right Click the mouse button on the camera will allow you to T ALL Monitors setup the camera All NVR It will show all the NVR Network Video Recorder devices which are auto detected by the CMS Right Click the mouse button on the NVR will allow you to reboot or shutdown the NVR All Monitors It will show all the monitor devices which are auto detected by the CMS Except the directories tree of auto detected devices the sys
32. ports listed above please shut down your firewall or anti virus software 3 Ifyou were able to detect all devices after closing down the anti virus software or firewall please check and adjust your firewall or anti virus software settings accordingly n a 35 omi a IP Security Solutions Provider neces Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City cb Taipei 235 Taiwan R O C EAA Tel 886 2 6620 5898 Fax 886 2 6620 6909 P E mail sales telexper com A member of VisionSoft http www telexper com SO 9001 2008 Quick Installation Model nVS 1P Step 1 For the Wall mount bracket 2nd screw the two devices together ES IIe e dst screw the bracket on the wall 36 IP Security Solutions Provider Inc Telexper International 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 T E mail sales telexper com u http www telexper com JS 9001 2008 A member of VisionSoft Model nHub 4P 2nd screw the two devices together 1st screw VA 7 Z fi the bracket SE on the wall O E Model nCS 16 32 48 Dual Monitor Display Design Video E Map Please prepare two monitors and connecting with the Commander Station when you want to use the Dual Monitor Display function The connected interface with two
33. se ey 41 IP Security Solutions Provider SRRRRRRR Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 D E mail sales telexper com A member of VisionSoft http www telexper com 4 You may also adjust the device settings such as resolution and fps d 4 D1 Y 30 fps deinterlace Camera 25 IP Dome Alarm 5 Check the Alarm box to enable alarm notification for Alarm In enabled device When the alarm is triggered a red alarm icon will appear on the screen For Alarm In setup please refer to Chapter7 Alarm In and Alarm Out Setting 6 Click f to exit Reload Devices Click button to detect new devices and refresh current device list 42 ne IP Security Solutions Provider ETOO Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA E mail sales telexper com A member of VisionSoft http www telexper com SO 9001 2008 Modify Setting Click EAERI AE button to edit selected device s network information e PIPER x 1a VideoServer SE hiii a IP 182 168 56 13 MAC 0040A250062B Default Gateway 192 168 65 75 IP Address 192 168 6 13 Default SubMask 255 255 255 0 Fort 34000 DHCP TimeOut 10 static IP Port Settings WIDYPVVD Settings IP Lock DHCP TOut 10 NewUID
34. the cameras on the Display Cameras List You may re arrange the order of the camera by using it A 65 of OBEE IP Security Solutions Provider wapskekbsbb Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 Ke E mail sales telexper com SCH A member of VisionSoft ry eter pepe ISO 9001 2008 Setting Title MiMO 01 Cameras Video Type All Cameras Display Cameras NTSC PAL ey All Camerasid 1 camane MIO Lak CamOne Camus oun Output Device Lf Camone 7 MTaM131 1 3M VGA EN Ci rene o Ce 17 VGA Sequence Duration 5 Sec EN Mode EN DI Alarm Display Display by Group Duration HA Haudrate OpDI DI Ee A DIE E Save Cancel Video Title User is able to key in or modify the device title Video Type Select the display type of output device NTSC or PAL Output device Allow you to change the output setting when you are connecting the Video Decoder with a different output such as VGA or HDMI 66 IP Security Solutions Provider wb Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA EA E mail sales telexper com A member of VisionSoft http www telexper com Sequence Duration To setup the duration time for display when using the Sequenc
35. to the camera icon For the settings please go to Alarm In and Alarm Out Setting in this chapter To relocate the device simply drag and move the icon on the E map Once the E Map setting of the device groups is done we can enable the E Map mode on the Live View 74 ap o BEES ect IP Security Solutions Provider SESEESSEER Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA D E mail sales telexper com osr A member of VisionSoft http www telexper com ISO 9001 2008 Alarm Schedule CMS allows you to set up a schedule to for motion and sensor alarm f f BR Ca fa E 201011215 17 26 24 om Device List Apply To a a ee pl a 8 DS i Motion Sensor I O Device LAN Device G Local View J EK 1 3M WAN Device E Camera 01 Device Group E_K Faraday VGA EK VGA 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 240 E map Alarm Schedule SE lt bk Aas E Se bees eee eel eae Ree ed are Recording Schedule E Mail User Management 9 10 1 12 139 1 15 916 17 18 19 20 si 22 23 29 Misc Advance 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 hv eet UR AE eae Ae US Te Re ae SMI a set ere d a a di El ce ap 9 40 Ek Kee K DL AB ie ae 18 a eee 23 aaa ok UMP ane PE IE S e Ta Us bk ee 2 C Show Live Video When Motion Alarm 1
36. 0 6909 EGA E mail sales telexper com A member of VisionSoft http www telexper com ISO 9001 2008 4 Enter User Name RAID Password hpt and then click Login SE Manage Event Setting Logout Help Technologies ine Please Login User Name RAID Password eee Login HighPoint Web RAID Management 1 4 9 Copyright c 1996 2008 HighPoint Technologies Inc All Rights Reserved 5 After log in successfully you will see Logical Device Information page Ensure the quantity of HDD is correct If not please turn off the system to check whether HDDs were inserted properly or were defective Under Physical Device Information section you can distinguish the new used status of the HDDs from the HDD icon HDD icon with letter L Legacy on it is for used HDD HDD icon without any letter is for new HDD St GH s S pe GAOL RORE Manage Event l Setting Logout Help l Technologies Ine Logical Device Information Name Type Capacity Cache Policy Sectorsize OS Name E Device_1_2 Hard Disk 160 04 GB HPT DISK 0_0 Physical Device Information Location Model Capacity Max Free i i 731500341A5 9V54CCS50 1 50 TB 1 50 TB 2 5731606155V 6RAF9S3B 160 04 GB 0 00 GB 1 3 7T31500341A5 9VS5S4GP90 1 50 TB 1 50 TB 1 4 ST31500341AS 9VS4EA9E 1 50 TB 1 50 TB 1 5 731500341A5 9VS4FRO5 1 50 TB 1 50 TB 1 6 731500341A5 9V54G6724 1 50 TB 1 50 TB 1 7 731500341A5 9VS54F2C2 1 50 TB 1 50 TB e HN d IP Security
37. 00 0040A2801089 192 168 56 51 192 168 56 75 10 NO 0040A2B801089 homeplus tii net 34051 Ta 17 MultiPD 192 168 56 35 34000 O040A2B00FDA 192 168 6 35 192 168 6 254 10 NO 0040A2B00FDA homeplus tii net 34035 W 17 MultiPD 192 168 68 36 34000 0040A2B0108A 192 168 68 36 192 168 656 254 10 NO 0040A2B0108A homeplus tii net 34036 a 17 MultiPD 19 1AA A 55 s4nnn NNANAPRNINTFTA 199 1AA A55 199 1AA A75 10 NO nn4nAIRNiN7A hamenius tii net 34055 HI 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 259 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 0 255 255 255 N ll 39 IP Security Solutions Provider Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA IKA _ E mail sales telexper com A member of VisionSoft http www telexper com Current Device Network Parameters Use the cursor to select one device from the Device List then the information will display Type e g 18 Video Server Network Information Show the current MAC
38. 1 14 Disk 15 5731500341 45 9V54D466 1 15 28 IP Security Solutions Provider a Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 AA D E mail sales telexper com A member of VisionSoft http www telexper com ISO 9001 2008 16 Initialization process will begin upon array creation A GAZES Cee AM Logout Help Technolopies func Event Setting Manage Logical Device Information Name Type Capacity Cache Policy SectorSize OS Name Status Initializing Foreground 3 Se RAID_5_0 RAIDS 21 00 TB Write Back 5126 a Maintenance remaining time 05 23 41 Physical Device Information Location Model Capacity Max Free 1 1 ST31500341AS 9VS4CES50 1 50 TE 0 00 GE 1 2 57T31500341A5 9V54F2 C 1 50 TB 0 00 GB 17 Upon initialization process the status will become Normal _ nn Oe PEGA LOC Help Technologies fac Setting Event Logout Manage Logical Device Information Name Type Capacity Cache Policy SectorSize OS Name Status e RAID 5 0 RAID 5 21 00 TB Write Through 51276 HPT DISK 0_0 Maintenance Create Array Physical Device Information Location Model Capacity Max Free ifi T315003541AS 9VS3525R5 1 50 TB 0 00 GB 18 Please restart the system 19 When you restart the system the System Process window will appear This ti
39. 2 6620 5898 Fax 886 2 6620 6909 HA D E mail sales telexper com E A member of VisionSoft http www telexper com ISO 9001 2008 RS485 Controller Product Description Each device provides the Video Server additional 4 set of the control unit could use to connect 4 different alarm input and out put devices Installation Please connect the RS485 controller DT D pin to the D pin of the Video Server and also the DT D pin to the D pin of the Video Server The power could provide from the 12V OUT pin of the Video Server and make sure both of the GND pin connected well to enable the power supply Model nGPIO Product Front View Product Rear View DIP Switch adjust table BIT1 4 for ID BIT5 7 for Baud Rate BIT8 for transmission mode DIP SWITCH BIT 1 2 3 4 DIP SWITCH BIT 5 6 7 ID00 0 0 0 0 IDO1 1 0 0 0 Relay Test 1 1 1 ID02 0 1 0 0 IDO3 1 1 0 0 1200 bps 0 1 1 ID04 0 0 1 0 IDO5 1 0 1 0 2400 bps 1 0 1 IDO6 0 1 1 0 IDO7 1 1 1 0 4800 bps 0 0 1 IDO8 0 0 0 1 IDOY 1 0 0 1 9600 bps 1 1 0 ID10 0 1 0 1 1D11 1 1 0 1 19200 bps 0 1 0 ID12 0 0 1 1 ID13 1 0 1 1 38400 bps 1 0 0 ID14 0 1 1 1 ID15 1 1 1 1 57600 bps 0 0 0 DIP SWITCH BIT 8 0 gt RS485Mode 1 gt RS232Mode 15 rSRRRR RR l l l IP Security Solutions Provider etter tt A member of VisionSoft Properties 1 Require the DC12V 350mA input Telexper International Inc 3F 3 No 2 Chien Pa Rd C
40. 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA E mail sales telexper com http www telexper com ISO 9001 2008 Available Camera Add All Camera Camone MITOMI 31 of CamOne OVTT25 MT 91 31 1 3M Droa Duration Sec 0 unlimited stop Buzzer Save Cancel Title Rename the device Host will update the device name accordingly Recording Camera You may drop the camera icon from the Available Camera list to Recording Camera list for recording 68 IP Security Solutions Provider ann as Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 ENA D E mail sales telexper com SCH A member of VisionSoft http www telexper com SO 9001 2008 Clear This button clears Recording Camera List and stops NVR recording All cameras will stop recording disregarding the recording schedule you have set up Add All This button adds all camera icons from Available Camera list to Recording Camera list HDD Alarm Buzzer Check this box to enable alarm buzzer when the HDD is malfunctioned or crashed Adjust Duration for length of alarm buzzer time Save Click this icon to save all updated setting of this page 69 IP Security Solutions Provider eet ttt Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C Tel 886 2 6620
41. 4 2 Connect Input the IP address of the server which you want to connect The default port is 6741 Address Book You can save multiple RemoteCMS server IP addresses up to 128 entries to the Address Book To save IP address 1 Scroll down address entries 1 128 and select one entry and then click Edit 1 2 3 A bh 5 I D CP 0 1 mmh wh e 97 omi o EEREN eee eee IP Security Solutions Provider SEEESSEEEE Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA IKA E mail sales telexper com http www telexper com A member of VisionSoft 2 Create a name for the RemoteCMS input IP address and Port for the RemoteCMS See above instructions Name SEET 3 Click OK to save the entry 4 Click Connect to connect 5 In the future you may go to the Address Book and simply connect to previous saved RemoteCMS without inputting the information again on the main menu Press the login Icon to open the login menu Then there will be a window pop up Insert Username and Password to sign in RemoteCMS al Username ef Seward Default Username admin Ir Default Password 99999999 Note Please go to d setup page for further connection setup Display Mode LH H It could be changed 1 4 9 16 screen display mode You
42. 5898 Fax 886 2 6620 6909 D E mail sales telexper com osr A member of VisionSoft http www telexper com ISO 9001 2008 WAN Device The WAN Device option allows you to connect the remote IP camera through the Internet f JA 2010112115 17 25 29 Type MAC Addre IP Port Login Passwo Title Faraday VGA g Cam 00D40A2 192 168 34000 admin Cam 0040 192 168 34000 admin video Control LAN Device Resolution WAN Device Picture Quality Record FPS Device Group E Mode Frame Rate E map Alarm Schedule Video Source NTSC Video Quality Brightness 0 Contrast 40 Huet Color 60 Sharpness 40 Recording Schedule E Mail rif User Management Misc Advance dy aRU Default Alarm In Name L Installed _ Enabled peili Go to preset L Video Loss Detection i C Audio In C Audio Out 1 i Alarm Out Name C Enabled RS485 Control a ee SS eee ee ee ee ee ee es Cep Pre CH VO Device C R5485 SLL Change RTSP Login Info Username Password KE Alarm Notification a Buzzer Audi Audio File Duration Sec Motion Alarm IT Default Sensor Alarm L Default YLoss Alarm C Default D t GE in Modify Remove Import Alarm when device is disconnected Click on Add to input the WAN device connection settings Click on Modify
43. 620 5898 Fax 886 2 6620 6909 ETA A D E mail sales telexper com osr A member of VisionSoft http www telexper com ISO 9001 2008 Change the password of the user Check on Change Password the dialog window will expand Key in the new password and input again to confirm the new password then press OK to finish the modification Ww Change Password New Password i Confirm New Password Dn keyboard The Change Password function is also available in CMS Setup Menu Please help to refer the Chapter 7 CMS Setup Menu gt User Management 49 om IP Security Solutions Provider Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 ETA D E mail sales telexper com osr A member of VisionSoft http www telexper com ISO 9001 2008 Chapter CMS Main Menu Live Mode For the first time login CMS will detect automatically and display all cameras on the main screen After the first time login go to devices III gage 2010 12 15 17 23 03 One B LAN Screen Display 4 8 9 10 13 16 25 36 64 Devices Directory 5 ae eo e i ER s X day vont RA Camera 01 REC e _ Fara Control Status Audio In Audio Out PTZ Alarm In Alarm Out Sequence Buttons Camera Name Sequence Central Management System i RA Main Menu
44. 6620 5898 Fax 886 2 6620 6909 EGA MEA E mail sales telexper com A member of VisionSoft http www telexper com Basic Playback m Speed AP 1 Scroll the Play Control Bar to the desired time and click to play the footage 2 Playback Control Backward Play 44 q E p da Fast Forward Fast Backward Stop 3 Click on the play speed bar to adjust the speed 1X 2X 4X 8X of playing the footage Speed Time Search Playback 1 Click Time Search button 2 User can input the desired start time or click Advance to setup a time range to search Start Time 2010 sir ob ol 52 a 20 3 Click OK to start g me d E 2010 ect 186 nu oi ep Normal OK Cancel i 86 coon C O IP Security Solutions Provider ETOO Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA D E mail sales telexper com SR A member of VisionSoft http www telexper com ISO 9001 2008 Event Playback You can easily watch all alarmed videos with Event Player Click on the icon A to switch to the Event Player for motion and sensor alarm events QE be AER mm Al Motion To search for motion alarms from the alarm log left click and right click mouse to search for the previous and next alarm accordingly S
45. 8 Fax 886 2 6620 6909 E mail sales telexper com A member of VisionSoft http www telexper com Notes Because the data of remote playback was gotten from the local CMS site We have to consider the bandwidth between local and remote side via Internet transmission We recommend to do remote play back function fewer than four channels at the same time for better video performance 5 To export and save the footage as AVI format click AYIE PO and then select the desired folder Select the footage time frame 20107 08715 08 49 21 Frame 66 D free space 62507 M eme oe Ka bk la aam D amy EH ane EI End AviExpo 101 anne ua lla _ lt _ _ _ ________ rm EEE IP Security Solutions Provider ETO Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 D E mail sales telexper com SE A member of VisionSoft http www telexper com SO 9001 2008 Chapter 12 LVC Local View Client Settings Optional LVC Local View Client software has the same installation setting and operations as CMS Please refer to CMS related chapters in this manual ys Same as CMS v Playback Mode S i e ie mnnn o EEREN eek IP Security Solutions Provider SEE ESSEEEE Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho Ci
46. 86 2 6620 6909 ENA EA D E mail sales telexper com osr A member of VisionSoft http www telexper com ISO 9001 2008 Chapter 10 CMS Monitor Mode The Monitor let you to control the nMD video decoder on the system easily Page 01 ap Z F The configuration of monitors please reference to the CMS Setup chapter 1 Click pj from the Main Menu control panel and enter Monitor Mode 2 Depending on the monitor devices you attached to the CMS system the monitor controlling menu will auto adjust the displaying screen size Click on c to enter to setting page Click and drag the monitor on the screen to re arrange the order of the physical monitors For Monitor setup please refer to Chapter 7 LAN Device Monitor Setup Click ele to start the Sequence mode gt A Se Single Monitor Dual Monitor The E Map can be displayed in quarter size window under Live View screen or displayed separately on the second monitor for dual monitor system 96 EE IP Security Solutions Provider Beet ttt Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 ENA IKA E mail sales telexper com http www telexper com A member of VisionSoft Chapter 11 RemoteCMS Getting Started RemoteCMS 1 Login RemoteCMS Ban Double click the RemoteCMS icon to begin the software RemotelMs IP 122 116 169 208 PORT 67
47. CMS server Default account is admin 99999999 if login fail please press 55 to retry Username admin Password 5 It will show the remote cameras on the screen if you login successful RemoteCMs Windows Internet Explorer Kl kel go E 122 116 169 208 EN kaltea 0 Dis gly Favorites sip Suggested Sites 5 Free Hotmail E Remotecms Z EN co Page Safety Tools a praa P Te i Gr Lamera KG 35X IP Dome NY 8 R3 IPL R3 Meza 224 F Dome NY S Rl IPC LA VOA NY S L4 Audio Out IFC R2 YGA W 8 L2 Audio In RSC IPC L 1 CCD NY 8 L1 GPIO NY S8 L3 Power Camera HE E O Copyright C Tel exper d erna Internet fa Wioom aa 105 weg E M o BEEBE IP Security Solutions Provider ETO Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 D E mail sales telexper com e A member of VisionSoft http www telexper com ISO 9001 2008 6 Click on one screen the frame will become green right click the mouse on the screen to adjust the camera and control alarm out device as light and alarm 7 Bemotet MS Windows Internet Explorer D Lech 6 e JE 122 116 169 208 EI kaltea e Dis sip Favorites si suggested sites 2 Free Hotmail Remotecms Ze Ed a Page Safety Tools CG 4 D Been P goe d Ges Bez
48. Connected wer 1 2 2 aes e 7 Camera ie NY S R4 35X IP Dome NY S R3 IPC R3 Mega 252 IP Dome N 8 R1 IPC LAG VOA NVS L4 Audio Out Ee e A IPC R2 GA Kean e Wi e NY 8 L2 Audio In NY S R2 IFC L1 CED N 8 L1 GPIO NY 8 L3 Power Camera HCH A i OMEN A Copyright C Telexper Interna HEZA one Internet fo e LIDD e 7 Snapshot og Click a channel on the live screen and then press Snapshot button to save the image as a JPG file 8 Zoom in out Click Zoom in and zoom out to enter Remote Playback Mode The operations for the Remote Playback Mode are the same as CMS Playback Mode Please refer to prior chapters for detailed instructions aa 106 weg IP Security Solutions Provider Set rrr Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 ENA D E mail sales telexper com SCH A member of VisionSoft http www telexper com SO 9001 2008 Appendix A Technical Support If you still have questions about our products you can contact the dealer you purchased from in your country Visit our website for more information Website http www telexper com E mail support telexper com Telexper International Inc 3F 3 No 2 Chien Pa Road Chung Ho City Taipei Taiwan 235 R O C Telephone 886 2 6620 5898 FAX 886 2 6620 6909 P DW 107 Pitt
49. Connector es gt Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 E mail sales telexper com http www telexper com Product Rear View nVS 1P Back Panel Connector illustration Video Z S EE oS fete Ses eS Ss Sek ERC GC a a F H E ire F L d es d at K h o ez d ES 2 d PRT E 3 8 O E Pe ee e DE mg SCC Defnion 1 D RS485 D RS485 2 D R 485 D R5485 Di n L e D 5 E aa a i L i L A DC 12V In DC12V In connect when ff w o PoE Gnd 1 DC 12W Out DC12WV Out only for camera only for 3 DC 12V In Gnd only for camera Audio Gnd only for 3 Audio In Aundio Gnd only for 5 Audio Out T Alarm In Alarm In 9 Alarm Out Alarm Out For nVS 1P the power is provided via POE by Gigabit POE HUB Thus it is not necessary to connect the DC12V In pin 3 and Gnd pin 4 from the above illustration For nVS 1 nVS 1 doesn t support the POE Thus please input the DC12V 1 2A min electric power in the DC12V In pin 3 and Gnd pin 4 Please use the CAT 6 LAN cable to connect each Telexper devices Please use the 75 Ohm coaxial video cable connecting the camera and the video server The DC12V Output at pin 5 provides the max 8W electric power The nVS 1 Video Server requests the DC12V 1 2A min
50. EI SE Ke b Kir MUSU REIN Lees ee m amman maaan ana ranmase Hi CMS Server Copyright C Telexper International Inc 1992 2009 71 anne 80 0 022 0505555 5 5 5 5 rn mm o LL E S E IP Security Solutions Provider SRggsgggg Gef F Telexper International Inc WaT a 3F 3 No 2 Chien Pa Rd Chung Ho City Er Taipei 235 Taiwan R O C fr Tel 886 2 6620 5898 Fax 886 2 6620 6909 EA UKAS D E mail sales telexper com 047 A member of VisionSoft http www telexper com ISO 9001 2008 The port information could be found on the RemoteCMS server while you move mouse over the IP camera BERRRDPRRAN E ee Be T Group s E T All Cameras 4 EZH 1 3M EZK Camera 01 E A Faraday VGA ih E SCH CA All NVRO X TE ALL Monitors 0 D W Faraday CRA Camera 01 REG Sequence a Wo s Central Management System For example 1 The IP address we found for the camera is 192 168 2 178 and local port is 34000 You can use 34000 plus the 178 and then it would be 34178 This number will be the WAN device port information for people to connect remotely 2 After input those information then use the Test button to test the connection if the connection is ready then the MAC Address of the remote IP camera will show 3 When the test was done then please presses Dk to add or change the IP camera s settings After all the remote cameras connected you can manage an
51. For nVS 4P the power is provided via POE by Gigabit POE HUB Thus it is not necessary to connect the DC12V In pin 3 and Gnd pin 4 from the above illustration For nVS 4 nVS 1 doesn t support the POE Thus please input the DC12V 1 2A min electric power in the DC12V In pin 3 and Gnd pin 4 Please use the CAT 6 LAN cable to connect each devices Please use the 75 Ohm coaxial video cable connecting the camera and the video server The DC12V Output at pin 5 provides the max 8W electric power The nVS 4 Video Server requests the DC12V 1 2A min electric power The effective distance away from the nHub 4P POE Hub is 100 meters 10 m IP Security Solutions Provider Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 D E mail sales telexper com oe A member of VisionSoft http www telexper com SO 9001 2008 Properties Upgrade any Traditional Analogue Camera to the IP System H 264 amp M JPEG Dual type Codec De centralized amp Modularized Design Unlimited Number of Camera Expansion at any time No Power Cable to Camera Required Reduce minimum 50 of Installation Cost Less Maintenance Cost than Analogue System Up to 30fps D1 120fps CIF Display amp Recording Multi Video Audio Streaming Design OO m n o m o NA IP Security Solutions Provider ETO Telexper Internationa
52. S 256 256ch CMS Station nCS 512 512ch CMS Station nCS 1024 1024ch CMS Station nCS 2048 2048ch CMS Station nHybrid 16 16ch Hybrid Station nHybrid 32 32ch Hybrid Station nHybrid 48 48ch Hybrid Station IP Security Solutions Provider eet eek Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 a E mail sales telexper com A member of VisionSoft htto Avww telexper com SO 9001 2008 Product Comparison Chart Max number of IP Camera Recording on the current station CMS Software Central Management Server Software is a dedicated application allowing users to monitor and control Surveillance devices via the Ethernet LAN It works with the H 264 Video Server which supports POE Power over Ethernet The Video Server derives its power from the Gigabit POE HUB through the RJ 45 so the user does not need to provide the DC power Also the Network Video Server POE version provides DC 12V output for the cameras You can connect and control over unlimited Video Servers at the best performance in cost and time Local View Client LVC Software Connects to Commander x v V v Stations and supports live view and playback functions S fi L K 3 on 88 gd mmm Fa BERBER IP Security Solutions Provider Bee Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER
53. abled Options Gotopreset SE j Alarm Out C Audio In SE Name Hove Image RS RS485 Control Pres Pelco_f CH Rapp 960 C Noise Reduction O UO Device Change RTSP Login Info Username Password Alarm Notifi ication _ Buzzer io AudioFile Duration Sec Motion Alarm Motion Alarm Default Sensor Alarm Sensor Alarm Default Voss Alarm Default Cancel PTZ Icon Please ensure the RS485 Control box is checked in the Setup page A R5455 Control AA Pelco P CH 1 PRSS 9600 UO Device PTZ Protocol Support Pelco H Pelco D Bosch and VC Baud rate 1200 2400 4800 9600 19200 Click Freset to extend the window as below 55 e we eg e S ane IP Security Solutions Provider Semm Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 E mail sales telexper com A member of VisionSoft http www telexper com ISO 9001 2008 T of Preset egd D For PTZ position setup you may store up to 256 angles Position the angle by using the PTZ joystick controller select Preset and then click Set to save the changes After the first setup you can adjust the camera to pre set angle by selecting the Preset and click Go PTZ OSD Setup The majorit
54. arm Notify 1 Motion Alarm Could define the sound type and the duration for each single camera 2 Sensor Alarm Could define the sound type and the duration for each single camera 3 VLoss Alarm Could define the sound type and the duration for each single camera Alarm Motity Duration sech Default ey h Default 8 Voss Alarm k i Default Ge Audio File Sensor Alarm e a tte Wl ze mm o EEEREN eo IP Security Solutions Provider SEEEESEEER Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 A A D E mail sales telexper com osr A member of VisionSoft http www telexper com ISO 9001 2008 ALITY MENT Monitor Video Decoder page 01 x ee D F Af CE Monitor helps you to setup the Video Wall or Video Matrix with the monitor output devices auto detect by the CMS server Each Video Decoder has up to quad screen display With the Sequence display function it could display up to 64 cameras Setting 1 Go to Setup page a and select monitor device from the Device List You may enter Monitor Mode ER and right click monitor icon to go to the Setup Menu 2 Setting Page Select devices from the Camera List and then click E to add to the selected Display Cameras List You may drag and drop camera from the Camera List to Display Cameras List Then check on
55. as 90 elle e GD ME 90 VOW COO DE 92 E Ui BR CC E N E EEEE A E E E E E E A E A E 93 SUD eE ee 93 SEENEN 93 Chapter9 CMS E Map Mod 1 0 0 2 cccccccceeeeeeeeneeeeeeeeeeeeeeseneeeesensoneneesensenesensonseeeseneenees 94 Chapter 10 CMS Monitor WO GG EE 96 Chapter 11 REMOLEGM si cececineuiesacnmeneicenboinnanwenneadeuwensieanmamneaieenbaeseumesnneenbaineeiwensensbanmateuniens 97 Getting Started RemoteC NS eekeERRKNRR ERR EERR EEN EEREER KEREN KEREN EEREENR KEREN RRE RE ERR EER KEREN EEN 97 IS DIA IO e LE 98 RemoteCMS Screen Live Mode ccscccesscceseccnseceneecenecensecensceneecaneeenseceescensecneeoosesonsesenseonesseneees 99 RemoteCMS Screen Playback Mode ccccccceseeeeeeeeeeeeaneeeeeeeeeeeseeseeneeaaeesenseeaeseanesaesenaseenensaees 100 Chapter 12 LVC Local View Client Settings Optional ce ccceeceeeeeeeeeeeeeeeeeeeeees 102 Chapter 13 IE Remote Connection SettingS aannunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 103 Directly use the IE browser to connect the CMS sasnnunnnnnnunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnennnnnnnn e 103 Appendix A Technical SUPPoOrt ccc ccecceeeeeeeeeeeeeeneeeeseneeneeeesenecnesenscnsseesonsenesensonesensoness 107 Appendix B Warranty Information ssiiensSescscnntcnstvendwnsdnxdewsdensdewnduesdunndwesdensinectewsdwucbensundeans 108 d w mm a IP Security Solutions Provider Betty ty Telexper International Inc 3F 3 No 2
56. csanseunetaenuecatencwesbancoseessseneceatacoacesinacanenaeiqcuenctacasesans niestenessenctapwiesencess 12 Gigabit POE HUB wp cecaeecetaceircecenceeatecnndoauacntesacecesncenuiozantsaansecticcteveusecesaneeedecenenscanceunssemuctondettessncecintccestses 13 Moder UU Oe sitire E E ena wue dee teen eee 13 Moder TU 2 eins ctneecip can et etre tes ose ease ciecie cee nice vet a tie aleisca tee nie aes alesis wee euiea wu ae sees mneanecunesneeeobeoneeceue ener aceon 13 Network Video Decoder Video Matrix cccccccseeceeeeeeeeeeeeeeeeeaeeecaneceeeseaeesenesenssaaessanesenessessaneses 14 Mode Hal NMO E 14 K OG ON I El ON E 15 Moder NOG PO WE 15 Multiple Network Vigieg ZetM Esgrgstauggek degiggugRENN eedeEE gege EN ESN Eege EE ENREE SEN 17 OSE E EE EE reer estntcamnecce teoctesonca penunecanencieneonarcacesuarsedsavaccatesnasteaancunenneiseamiaessnencacesenseaesamainacinpasieneees 17 Network Vide TK OCON GER 5 sasiccsisesccesccrscxcadcesttensncwscnpactnatewansaducdanansareusiasandevaniactnsanssnusesastnceseenwaldeaneanenieds 20 Moder NYRA E E 20 lee Hal NYRA TORI WEE 22 AVR RAID S96 GUIGO cnn E ee ee eee ae a eee eae eee ee eee eee 23 Commander Station Central Management Server software bullt il scceseeseeseeeeeeeeeneeenes 31 Model e FG rE st asacanesorneesucisasuctasncacaesensucanuaspensaansusenueusecaasenneccuseeecs 31 PN ON CANO CD DE 32 System Requirements for the LVC and RemoteCMS Software cccccccscceec
57. d adjust setting of the cameras About the settings please refer to the LAN Device settings pages 72 IP Security Solutions Provider NEESS Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 ERA UKAS D E mail sales telexper com 047 A member of VisionSoft http www telexper com ISO 9001 2008 Device Group Device group allow you to add and define the groups for all the devices for you to management the cameras monitors and network video recorder more convenient 2010 12 15 17 25 58 55 Group list Device list E Group Title MACAddress EY 1 3M Faraday VGA 00404250017 C LAN Device i EY Camera 01 EVGA 004042500456 WAN Device Device Group g E map Alarm Schedule Recording Schedule E Mail User Management Misc Advance rn GR SS i e ee et EE ET sgr get TR aa ur ee Fa 2 sees fam or B eee a EI feo a a hed e aeae teek a ee hod Se os CO Se 9 254 mith Leer ge 8 Zb ee eee a eee Add Group Remove Group ag 1 Add anew group by clicking Add Group Add Group 2 Click on Remove Group Remove Group to delete the selected group 3 Move the selected camera up in the order 4 Move the selected camera down in the order 5 Select one device from the Device List and then click to add to the selected Group List 6 To re
58. e function The Monitor device will display each camera by the time interval of the Sequence Duration Mode Select 1X1 for full screen display or 2X2 for quad screen display The yellow highlight of the cameras is for the ease of review for 1X1 or 2X2 group display You may use 4 to rearrange cameras between groups Alarm Display Check this box to enable auto switch to live view of the alarmed camera The screen will automatically switch to live view and return back to TV Wall until the alarmed is cancelled Display by Group Check this box to only enable auto switch to live view of the video wall which the alarmed camera belongs to Duration Select the duration of the display of alarmed camera Select Always to continuing display alarmed channel until the alarm is manually acknowledged RS485 Baudrate Select the corresponding Baud rate for the RS485 device F 67 SE Wl CC O O BS IP Security Solutions Provider neces A member of VisionSoft Network Video Recorder Setting Title Default os Recording Camera Recording camera Clear camera D D 449 449 H D 450 450 H D 4511451 b 452 457 0 D 453453 H b 4547454 D 455 455 2 0 458 456 oP D 457 457 04596458 D 459 459 CG D 460460 D 461 461 0 D 462 462 ED 463463 D D 46446 Jl Hdd Alarm Buzzer z Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei
59. e installed cameras and devices from a floor map of each group ISO 9001 2008 Administrative Engineering Engineering Production Depatment Departmen Departmen Department E Camera O8 Business Department E a cimgaT Camera Camera 01 nt Quality D ET fren Camera G2 Department Lobby T lamera O A 4 i OUER A Camera O4 Sara t Camera 04 Warehouse Demo Ream Camera You could click the camera icon on the E map and highlight the live video of that particular camera Right click on the mouse button on the car a could directly see the small size camera image on the E Map Administrative Engineering Engineering Production Depatment Departmen Departmen Department i Camera 06 Business onference Department Room e BnNaggprent Quality Camera 01 2 Department Lobb G wm e J Ca l Demo Room E 94 am DR IP Security Solutions Provider Bee Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EA E mail sales telexper com e http www telexper com JS 9001 2008 A member of VisionSoft le Alarm When the alarm is raising the camera icon will display in red and the display of the live view screen will also jump to display the alarm camera image Motion When the motion detect active the camera icon will display in red as the icon show and the
60. ecurity Solutions Provider A member of VisionSoft Playback Main Menu Buttons Live El Click Live button to return to CMS Live mode Listen Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA E mail sales telexper com http www telexper com ISO 9001 2008 Select one channel and then press Listen button to play the recording Click again to disable the function Please make sure the Audio In box under LAN Device is checked Image Editor D CMS can take and save a single screenshot at the maximum resolution for the selected channel During playback click the Snapshot button to call out the image editor You may zoom in out of the image adjust image resolution manual optimized or default setting OPTIMIZE DEFAULT OPTIMIZE Auto adjust the picture settings 2010112 10 42 39 DEFAULT Restore the default settings of pictures PRINT Print the picture SAVE Save picture to file CLOSE Close the image editor R np of ann BRRRR Tengegeeg IP Security Solutions Provider ERNENENEEE Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA E mail sales telexper com A member of VisionSoft http www telexper com ISO 9001 2008 Capture a CMS can take and save a sin
61. el T31500341AS 9VS4D46G Capacity 1 50 TB WW 26 Oo BB IP Security Solutions Provider WW ULC Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 A A D E mail sales telexper com A member of VisionSoft http www telexper com SO 9001 2008 12 Go to Manage and select Array Manage Event Task Setting Array Logout veVvICce Spare Pool Initialize Devices Controller 1 RocketRAID 2340 SATA Controller v1 4 Device 1 1 Model 57T3150034145 9VS54CCS0 Capacity 1 50 TB Device 1 2 Model 5731500341A5 9VS4F77C Capacity 1 50 TB 13 Click to enter Create Array Page E GGL GOL T Event Task Setting U erp o Tri Aas fogtes ne Manage Logical Device Information Name Type Capacity Cache Policy SectorSize OS Name Status Physical Device Information Location Model Capacity Max Free ifi 7T31500341A5 9VS4CCS0 1 50 TB 1 50 TB 1 9 6731500341 AS 9VS4F77C 1 50 TR 1 50 TR 21 IP Security Solutions Provider lt n A member of VisionSoft Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 E mail sales telexper com http www telexper com ISO 9001 2008 14 Under Create Array page select RAID 5b for Array Type Foreground for Initializatio
62. elexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 E mail sales telexper com Alarm List Alarm List shows the 50 latest alarm messages Click the highlighted event to acknowledge the alarm Check Popup when Alarm Occurred box to bring up Alarm List when an alarm is triggered You may update the status of the new alarm to Unresolved Resolved or Pending Once the status is updated the event will be removed from the Alarm List To further update the status of the alarm event you will need to go to Alarm Log E which contains the full list of alarm events Setup DN Press the Setup button to go to the CMS setup page Screen Display WE Supports the 4 8 9 10 13 16 25 36 64 display CMS Lite version supports 16 display Hybrid 16 version supports 36 display Hybrid 32 version supports 64 display For Full Screen Display please help to click directly on the desired channel to select then click again to switch to full screen Click again to return to the previous screen display 93 ie IP Security Solutions Provider eet Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 A A D E mail sales telexper com A member of VisionSoft http www telexper com Chapter 9 CMS E Map Mode E map helps you to view th
63. ensor To search for sensor alarms from the alarm log left click and right click mouse to search for the previous and next alarm accordingly 87 At RR IP Security Solutions Provider eet ttt A member of VisionSoft AVI Export Inc Telexper International 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA E mail sales telexper com http www telexper com 1 Click Avi button and Key in Time Range Start Time Enid Time ol elo o o Je em alal el o el a Sipe 82h ZE Tei Pe 42 Camera MAC Address CamOne MTS o0404825001F4 CamOne OVT 004042500172 1 MTSM131 1 5M 004042500410 VGA OO404275001 70 Hard Drive EN Select Directory for Export Di _ Export Player 2 Then select the directory where you want to save the exported files 3 Click Start Start to execute the command 4 When the Finished is showed on the status bar then the AVI export is completed 5 Then click the exit to leave the AVI Export Note The exported AVI file has to be played by CMS Player and could not be played by Windows Media Player For first time CMS Player installation check on the Export Player box Selected footages will be saved under the designated SP ze willbe CMe Flaver directory and the CMS Player will be installed and a shortcut created on the Windows Desktop 88 IP S
64. ent will be removed from the Alarm List To further update the status of the alarm event you will need to go to Alarm Log Ki which contains the full list of alarm events Logout E Click the Logout to change the user Exit p Click the Exit to close the CMS 58 m n DW O BE TIET EEN EEE MER SEES IP Security Solutions Provider DRRSSRRRSRR Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 ERA D E mail sales telexper com lt a A member of VisionSoft http www telexper com ISO 9001 2008 Chapter 7 CMS Setup Menu LAN Device fGen Device list Type MACAddress 2010 12 15 17 24 31 Motion Setu Motion Title Faraday VGA e See Video Control LAN Device Resolution VGA a iN Picture Quality High ai WAN Device a We a Gei 00404250017 C Faraday VGA Record FPS 30 N Sigk A eid out H Device Group cl E map ak Al Schedul hb Video Source NTSC arm Schedule ab ei i Video Quality Recording Schedule Brightness 0 i Fy Contrast 40 E E Mail Hi Hue 0 2NR User Management H Color 60 ae a u i Sharpness 40 Sense 4 Ca Misc cl Advance Default Alarmin o ooo Installed Enabled Options Mame z O Go to preset C Video Loss Detection Alarm Out Audio In GC Enabled Audio Out RS485 Control Mode InDoor
65. er is provided via POE by Gigabit POE HUB Thus it is not necessary to connect the DC12V In pin 3 and Gnd pin 4 from the above illustration Please use the CAT 6 LAN cable to connect each Telexper devices The effective distance away from the nHub 4P POE Hub is 100 meters e 6 T B z d NW LL EER IP Security Solutions Provider aan A member of VisionSoft Properties VGA 1 3M 2M High Resolution CCD e CMOS CCD Sensors H 264 Compression e Resolution 640x480 30fps 720x480 30fps e PoE Power over Ethernet Hub to feed power e Built in mechanical IR Cut Filter e Built in Fixed Manual Auto Lens e IR LED 30 36PCS IR distance 20M e 4 Motion detection in one image e Linux OS e H 264 M JPEG SOC dual compression High Speed Dome e 1 4 Sony EXview HAD CCD e H 264 Motion JPEG SOC dual mode compression e Two way audio communication over IP networks e Built in hardware motion detection e Mechanical IR Cut Filter e Multi streaming e Resolution of 768 x 494 e P66 Weather proof protection housing accessory is available Outdoor IP Security Solutions Provider Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA UKA E mail sales telexper com http www telexper com A member of VisionSoft Video Server Model nVS 1P Product Front View Notes Back Panel
66. erver LANS LANZ2 LAN 19 IP Security Solutions Provider TG Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 UKAS D E mail sales telexper com osr A member of VisionSoft http www telexper com ISO 9001 2008 Network Video Recorder Installation Connect the nVR to the CMS network the CMS system will auto detect the nVR devices without any additional configuration Record Function Add the cameras which need to be recorded by nVR each nVR works independently Playback Function Playback the video films with CMS Model nVR 4 8 Product Front View nVR 4 nVR 8 Embedded XP Platform 20 TIET EEE HHHH IP Security Solutions Provider me titiiii ii A member of VisionSoft http www telexper com 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Telexper International Inc Tel 886 2 6620 5898 Fax 886 2 6620 6909 E mail sales telexper com Properties Se Ae a Me 9 Support All Analogues Camera with Telexper Video Server Dual type Codec H 264 JPEG Dual Monitor Display Design Video E Map Pentaplex Design Live REC Playback Backup Remote Viewing Hot standby REC Always Recording 1 Smart Motion Activity Search E mail Alarm inc HDD Failure Notification CD or DVD Burner Backup optional Dynamic amp Static
67. eseeeeeeeeneeeneeeneeenees 33 Chapter 3 System SOC WE 34 System Setup FIOW Chart d 34 Setup under Firewall Environment ccccceecceeceeeeeeeeeneeeneseneceneceneeenecenseeaseasenesenesanesenesenssensnanees 35 Quick TMS IEN d E 36 Moder nS i E 36 Moder MAOD AP EE 37 lee HK Leg LE TO EE 37 IP CCTV Installation Diagram EE 38 Chapter 4 IP Address Setup Device Setting cccsecseeeseeeseeceeeeeeeeeesenseeneeeeeeeeeeeesens 39 Ener BI SeN DN 39 Buttons PISS Ci de EE 40 Chapter5 CMS General Operations ccccccceeeeeeeeeeeeneeeeeeeseneeneseneeneseesonsenesensonesea naess 48 Oo BE 3 T IP Security Solutions Provider ETLE Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA A member of VisionSoft Te a ISO 9001 2008 Getting BE dn Ke LE 48 Change the password of the USEF cccccssceeeeeeeeeeseeeeeeeeeneeeeeeneeseasaeeseeeseeseneeeseoesaeesoaeneeseneneessasaessonsneesonens 49 Chapter6 CMS Main Menu Live Mode ccccccseseseeeeeeeeeeeeeeeeeeeeseeeseneseneeeeeeeesonesees 50 Main Menu Buttons OVOF VIC W cs ccc cesses aes eege 50 HOUN OY E 52 Neel e EE 53 SS CO E 53 SSES aleet 54 Shortcut to Device Settings PTZ ccccccccceeceeseeeeeeeeeeeeseeeceneeeeeseeseeeaesseaeeaeeseaaeeeaaseaessaaesenaesanesaaes 55 PIZON EE 95 BE 57 OAC he E 57 VO DEVIC aca ec tens cee ete gem c
68. et network to easily update each device s network parameters Enter Device Setting After installation from the Application CD an icon will appear on the desktop Devicesetting Double click the icon to begin the software Device Setting Main Menu Current Device Network Parameters WAN Infomation Static IP dev count 45 Default Gatews IP Address ay Type Count Default SubMask MultiPD 32 DHCP TimeOut Video 11 Monitor 2 Domain Name Port Number i Si gt DNS Register Language English H wn emm Import Gr Sg Type IP Address Port MAC Default Gateway Default SubMa De Static IP Domain Name Port NO fs S UE ZDUUTU d Z Do az 100 0 4 UU4URZ0UU TUO MU epIUS IULME SUL tsa 32 Monitor 192 168 6 6 34000 004042600054 192 168 6 6 192 168 656 254 10 004042600054 homeplus tii net 34006 Ta 18 VideoServer 192 168 6 13 34000 0040A250062B 192 168 6 13 192 168 6 75 10 NO 0040A250062B homeplus tii net 34013 T 18 VideoServer 192 168 6 10 34000 O040A25005E7 192 168 6 10 192 168 6 75 10 NO 0040A25005E7 homeplus tii net 34010 W 18 VideoServer 192 168 56 15 34000 O040A25005EF 192 168 56 15 192 168 56 75 10 NO 0040A25005EF homeplus tii net 34015 Te 18 VideoServer 192 168 56 14 34000 0040A2500636 192 168 56 14 192 168 56 75 10 NO 004042500636 homeplus tii net 34014 Ta 18 VideoServer 192 168 6 11 34000 O0040A25005E9 192 168 6 11 192 168 6 75 10 NO 0040425005E9 homeplu
69. exit device setup 2 Manual Detect Device Unchecked the device auto detect box to enter the Manual Detect screen RI e Or KR 2010 12115 17 24 57 Device list Type MACAddre Title Device Group EE Total Device 4 Emp Type Mac Address Name Select E AlamSchedule Camera 004042500456 VGA oO Recording Schedule Camera 0040425001 F4 13M OC EMail Camera 0D40A250018C Camera O User Management Camera 00404250017 C Faraday VGA A eS LAN Device gt Modify Remove Import Scan Alarm when device is disconnected C device auto detect 1 Click to manually input device information 2 Click to directly import device information 3 Click to manually select devices that you wish to display on the current system 4 Click to manually remove device from the list 60 ap SEES Peek IP Security Solutions Provider WW UU A member of VisionSoft Video Server IP Camera Tel 886 2 6620 5898 Fax 886 2 6620 6909 Telexper 3F 3 No 2 Chien Pa Rd Chung Ho City International Inc Taipei 235 Taiwan R O C E mail sales telexper com http www telexper com MANAGEMENT ISO 9001 2008 Setting Motion Setup Title Faraday VGA EN Video Contral Resolution Picture Quality High Le Hercord FFS 5 Le Mode InDoor Di Video Source NTSC Le Video GOuUaltbt Brightnessi 4 gt Contrast4o 7 gt Hueco xs
70. exper com ISO 9001 2008 Ue ey A ee e es e a a e e a ee et et Sun kaden knea deadar eer rel ee aie 6 Storage Space Check During the schedule settings the system will automatically display the required Hard Drive Space The following message will pop up if the estimated space has exceed the allocated hard drive space Please note that the estimated required space has exceeded the maximum space allowed for recording Home will be using the recycle technique Please make sure that the designated Hard Drive space is greater than the estimated space for recording We do not recommend to set up the recording space on the Drive C 2 The system will begin to recycle recording mode when the recording space is full Pre Slarm OFF se Alarm S0fsec we Keep Recording Until End of Alarm Speed 30 zer Full speed Recording When Alarm Occured Hard Orive Settings Recorded Space Free Space O 0066 55GB Eu EE 0 2066 40GB Eu l 0 0066 3GB Fu Up To GE E Alarm Recorder Pre Alarm save the footage 0 10 second before the alarm Alarm save the footage up to 60 second after the alarm The default recording time is 30 seconds Check the Keep Recording until End of Alarm up CMS will not consider the settings of Pre Alarm and Alarm CMS will record Pre Alarm 10 seconds and Alarm 60 seconds Clear Camera 10 Camera 09 1 Camera 08 i 7 Camera 07 Cl
71. external speaker into this jack to listen voice Mic In Plug an external microphone into this jack to transmit voice USB ports 4 Plug USB devices Ethernet Jack Plug 10 100 1000 Ethernet network cable into the jack Keyboard Plug the keyboard Mouse Plug the Mouse Power In jack Plug the power cord into the port o A Default manufacturer setting is set to 230V If the environment is under the 115V electric power supplied CH pm Please ensure to use the correct voltage 115V before turning on the nCS To avoid the risk of explosion from using incompatible battery please use batteries with the same specifications or recommended by your original supplier or manufacturer Dispose of used batteries according to the instructions n a 31 O BB O LL o BEREE ate IP Security Solutions Provider DRRSSRRRRS Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 KA D E mail sales telexper com oar A member of VisionSoft http www telexper com ISO 9001 2008 Application CD Application CD contains Main Menu Page Acrobat Reader To install Acrobat Reader Software Manual PDF User Manual File Software Go to Software List Page If you can t read the manual please install Acrobat Reader Acrobat Reader Most Reliable 2 Am Jaen Vru Sofware L NOTE Your CMS is built in nCS already Si i Thus i
72. gle screenshot at the maximum resolution for the selected channel Click a channel on the live screen and then press Capture button to save the image as a JPG file To view or change the image folder go to Setup MISC to update the Snapshot Folder Smart Search EN Smart Search provides a narrower search function Note CMS Lite free software does not support this function 5 a Start Time A SEN 20106 112 Obje IP Security Solutions Provider A member of VisionSoft http www telexper com SC E ee en Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 E mail sales telexper com Select channel from the Playback page that you would like to search on Click on Smart Search icon to pull out the Smart Search page Left click on the screen and move the cursor to frame the motion detection area According to the sensitivity and detect object ratio check on Dynamic or Static Object Search box You may adjust the Sensitivity 1 100 bar and Detect Object Ratio 1 100 bar if needed Detect Object Ratio is the degree of changes of the framed area you selected in step 3 The higher the degree the fewer results will be found Click Start to start searching The search results will show on the right screen Use the Playback Control _ to play backward stop the video You may double click o
73. goods or expense or inconvenience caused by service interruptions Under no circumstance will any person be entitled to any sum greater than the purchase price paid for the products To obtain warranty service you should first contact the vendor from whom you purchased your IP CCTV products You may be asked to furnish proof of purchase to confirm the products are still under warranty e 108 PELL EE mm EEREN eee IP Security Solutions Provider SEEESSEEEE
74. hung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA E mail sales telexper com http www telexper com ISO 9001 2008 2 Provide the additional 4 sets of alarm input and alarm output 16 IP Security Solutions Provider Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 ETA D E mail sales telexper com osr A member of VisionSoft http www telexper com ISO 9001 2008 Multiple Network Video Server Model nVS 32 48 64 Product Front View nVS 32 nVS 48 KI 83 oy GF ei ei mu II rei e b i GA D Product Rear View 17 DE eee o BEEE GER IP Security Solutions Provider anon A member of VisionSoft P e H 264 Motion JPEG Dual Core Image Encoding roduct Description Hot Swap with Blade design MAX 1 920 fps D1 quality video stream Tel 886 2 6620 5898 Fax 886 2 6620 6909 Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C EGA E mail sales telexper com http www telexper com e Multi Stream concept each channel transfer more than one stream to different device like nCS nMD nVR Dual Power Redundant 4U Height 19 rack stackable Provide the service for 32 48 64 channels analogue video image encode change the traditiona
75. ick Clear to remove checked cameras schedules Select the C Camera 05 am e desired cameras and then click OK Select All DeselectAll Ok Canel_ m 77 coon a aUl WWII TIET O BEDENEN Caas SESH IP Security Solutions Provider EEB Tel 886 2 6620 5898 Fax 886 2 6620 6909 A member of VisionSoft Import Settings from Camera Camera 03 D Camera 03 Camera 02 Camera 01 Apply To Camera O9 Camera 08 Camera OF Camera 06 Camera 05 Camera 04 Camera 03 Camera 02 SelectAll De OK current camera Telexper 3F 3 No 2 Chien Pa Rd Chung Ho City International Inc MANAGEMENT ISO 9001 2008 Taipei 235 Taiwan R O C E mail sales telexper com http www telexper com Click Import From to apply other camera s schedule to the Click Apply To to apply current camera s schedule to other S select All Cameras Canel Click on the Hard Drive Status will pop up the Recording Information window It will list all the Hard Disk information on the list Recording Information Hdd No Hdd Name Local Recording 1 IP Wide o E HDD No HDD Name Total Size Free Space Records Used Max Size Percent Status Total Size Free Space Records Used 617 15 GB 2 00 GER 59 60 GEB By the HDD attached order As Windows system default The space left The recording status of the HDD 78 IP Security Soluti
76. ill open the 4IN 4OUT RS485 I O controller setup page for current video server And then you could click the click the Ve IO control panel RS485 and PTZ Control 1 Check on the box to enable the PTZ control function 2 Protocols supported by CMS currently are Pelco_P Pelco_D Bosch VC and Panasonic 3 Baud rare supports 1200 2400 4800 9600 19200 4 Channels defined as the ID which can support ID1 to ID255 devices R5485 Control PTZ CH R8455 VO Device a 63 ETH D a O DRRRRRR IP Security Solutions Provider ETO Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA UKAS D E mail sales telexper com SR A member of VisionSoft http www telexper com ISO 9001 2008 Acknowledge Alarm Event When a motion alarm is triggered the system will automatically start recording To acknowledge a motion alarm click the flashing icon k on the live screen You may also have a quick view of the last 50 events from f Alarm List Check Popup when Alarm Occurred box to bring up Alarm List when an alarm is triggered You may update the status of the new alarm to Unresolved Resolved or Pending Once the status is updated the event will be removed from the Alarm List To further update the status of the alarm event you will need to go to Alarm Log Ki which contains the full list of alarm events Al
77. ion provides the best performance stability and reliability for you all to have the best quality on the Surveillance and security Regarding the LVC Local View Client or RemoteCMS please refers to the Recommended Hardware Environment below Minimum Computer Requirements for LVC Local View Client and RemoteCMS Operating System Better to have the Windows XP SP2 at least or most updated patch CPU Intel Dual Core 2 66GHZz or higher Ram 2GB Memory or more HDD Minimum 300MB space size for software application installation Display Best Recommended Resolution at 1680x1050 Recommended Computer Requirements for LVC Local View Client and RemoteCMS Operating System Better to have the Windows XP SP2 at least or most updated patch CPU Intel Core2 Quad 2 66 GHz or higher Ram 4GB Memory or more HDD Minimum 300MB space size for software application installation Display Best Recommended Resolution at 1680x1050 a 33 RRE WB EEREN eee IP Security Solutions Provider SEE ESSE Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 _ E mail sales telexper com A member of VisionSoft http www telexper com Chapter3 System Setup System Setup Flow Chart Prepare the hard disks HDD 3 5 SATA type HDD is recommended Install the HDDs inside the Caddy case For nCS series ensure to
78. l Inc Tel 886 2 6620 5898 Fax 886 2 6620 6909 E mail sales telexper com A member of VisionSoft http www telexper com Model nVS 16 Slim Product Front View Product Rear View as a Se SS a _ SSS Notes 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA For nVS 16 Slim nVS 1 doesn t support the POE Thus please input the DC12V 1 2A min electric power in the DC12V In pin 3 and Gnd pin 4 Please use the CAT 6 LAN cable to connect each devices Please use the 75 Ohm coaxial video cable connecting the camera and the video server The DC12V Output at pin 5 provides the max 8W electric power The nVS 16 Slim Video Server requests the DC12V 1 2A min electric power The effective distance away from the nHub 4P POE Hub is 100 meters Properties H 264 Motion JPEG Video Codec Hot Swap Blade Design Up to 1 920 fos D1 Resolution Video Stream Up to four 4 Video Streams Simultaneous Redundant Power Modules Design Se SYS 4U Height 19 rack mountable cabinet IP Security Solutions Provider WW Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 AA _ E mail sales telexper com A member of VisionSoft http www telexper com ISO 9001 2008 Model nHub 4P Product Front View a e b i
79. l analogue cameras DVR to digital video stream Need to work with CMS server 64 Channels or above Support nCS 64 128 256 channels or above IP Security Solutions Provider oc Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 D E mail sales telexper com SR A member of VisionSoft http www telexper com ISO 9001 2008 Product Front and Rear Description The lieht is showing green color while it is been None Front connecting and using RS485 function at this machine eal l D R5455 Flease connect the E5485 controller DT D pin to the 2 D R5485 kear D pin of the machine and also the DT D pin to the D pin of the machine The nv 34 46 64 provide dual power redundant O Power Off function please use them at the same time I Power On The lights are showing ereen color that mean they are working smoothly ES KE E 3 Ports HUB LAN l LAN 3 are three ports siga Ethernet HUB and without POE they could be connected to other LAN devices together IDO 0 0 0 71D 1 0 0 Bit 1 2 3 ID2 0 1 0 1D 3 0 1 1 On 1 or Ba ID4 10 0 ID5 1 0 1 Off 0 DG Los 1 11 Default ID 0 When the system connect over two nV S machines at the same environment please check to switch the ID Bit 1 8 Peat Please use the 75 Ohm coaxial video cable connecting the Default All On camera and the video s
80. lled on CMS already click Import for email account information 2 Send Mail if Alarm Occurred Check this box to enable email notification when an alarm is triggered Attach Image Check this box to attach alarm image to the email notification Enter a subject for your email in the Subject field Click Add Mail Address to insert and add recipient email address Select existing email address and click Remove Mail Address to remove 6 Click 22874 to send a test message 19 Bm E S W6hAaAa82 0 60606 nn o EEE of IP Security Solutions Provider eet Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA D E mail sales telexper com lt a A member of VisionSoft http www telexper com ISO 9001 2008 User Management User Management helps establishing authorities for each user and group User list Group Privileges amp Fh Administrator O LAN Devices Settings EE or Coen O WAN Devices Settings e g Ae O Group Settings LAN Device a O EMap Settings BBW CESS SURE T Te CR rr O Advance Settings E map O User Settings e C Delete Logs E Mail O Set Alarm Schedule d O PTZ Settings User Management PTZ Control e C Recording Schedule Settings WAN Device Misc Settings Device Group Playback View EMap View Alarm Schedule Mail Settings Monitor Recording Schedule View User Log Es Mi
81. lock the HDD power switch corsa eo cable oN SCRE Uee Smears cae ones rees e Connect Cameras by using the 75 Ohm coaxial video cable to nVS 1P Connect the nVS 1P by using the CAT 6 LAN cable to nHub 4P Connect the nHub 4P by using the CAT 6 LAN cable to nCS Check the Monitors Keyboard Mouse Power cord etc are connected Power on the nCS the system would auto setup at first launch CMS will start after 3 5 times reboot Finish system start working IP Security Solutions Provider RR Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA D E mail sales telexper com SCH A member of VisionSoft htto Avww telexper com SO 9001 2008 Setup under Firewall Environment Among the anti virus products in the market many have the firewall feature included If your IP Network devices were installed under the environment with firewall you will need to manually open ports to allow CMS system to detect ALL the IP devices 1 Ensure port numbers are opened Required port numbers for IP Network System Purposes Port Number Central Commander Station Hybrid DVR 6741 IP cameras video servers matrix decoders NVR network video eae recorder Remote CMS Remote playback of WinNVR 6742 Web service for CMS 8000 2 If you were still not able to detect IP devices after opening all
82. may double click on the selected camera to switch to full screen To return to the original display mode click on the screen once 98 ah CWaW5ACzCiwCSC T OO K IP Security Solutions Provider eet a ae EH BC E d A p R 8 hw I Telexper International Inc r Y Ve wm Wm Wm 3F 3 No 2 Chien Pa Rd Chung Ho City a fe Pp E rm Taipei 235 Taiwan R O C MANAGEMENT ISO 9001 2008 Tel 886 2 6620 5898 Fax 886 2 6620 6909 E mail sales telexper com http www telexper com eer Fj KEN A member of VisionSoft RemoteCMS Screen Live Mode Allow you to connect to the CMS server remotely can even control the PTZ or I O devices on the web based RemoteCMS application 2010 711712 11 22 01 _ Gente Buttons Live Setup F Language Iv 0i GR CHT Remote Playback E NBroadcast L4 ENEmergency R4 E NLISTENER R2 English CHS Russia v 02 LC H er mp Dome EN video server L1 ENSWITCH R3 ower Control L3 Portuguese French Device list varies based on the user authority given D SIEL ENEmergency R4 ENNYVS1P R1 EN Power Control L3 EN Camers 03 ENCamera 05 EN Camers 06 EN Camers 08 A 35X IP Dome END4 GA Z 4_9 B ENCamera 01 EN Camers 04 EN 44 Ga Z 4_9 B E NCamera 02 EN2M 01 ver 7 3 3 3 2 0 48 11 Camera 08 Power Comal IS p E Ip bag GH 2 KE Emergencyana ena fe You could also right click the mouse button on the
83. me please do not click and wait 30 seconds for this window to disappear nie LEM PROCESS Click Tecnunate to stop Program Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 E mail sales telexper com http www telexper com A member of VisionSoft formation process HDD Process Format Option mip Al Format PEA 21 Upon HDD formation the system will automatically restart again and start NVR program Notice If the network video recorder is nVR 15 or nVR 15 Raid series please insert the HDD rack from the bottom to the top in order to prevent no detection of HDD 30 aan E IP Security Solutions Provider ETO A member of VisionSoft http www telexper com ISO 9001 2008 Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 UKAS E mail sales telexper com Commander Station Central Management Server software built in Model nCS 16 32 48 Product Front View Product Rear View Description Power button Press to turn the nCS on Recordable DVD Use this drive to install programs store files onto Drive recordable DVDs USB port Plug USB devices HDD Caddy 4 For HDD installation Video Out Video output connector for Monitors Speaker Out Plug an
84. move devices from the Group List select the desired camera and then click gt 73 e 7 o BEEBE IP Security Solutions Provider WW UU Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA D E mail sales telexper com osr A member of VisionSoft http www telexper com ISO 9001 2008 E map E map helps you to installed cameras and devices from a floor map You could set up one E map for each camera groups 2010 12 15 17 26 12 Group list SS Group EK 1 3M LAN Device EK Camera Administrative Engineering Engineering Production WAN Device EY Faraday Depatment Departmen Departmen Department fh VGA Device Group 2 E map o Alarm Schedule Business 4 Recording Schedule Department g Quality E Mail Department at G User Management Misc Advance l 1 ee tasta acme E ae 2 ar s Le D H amp ok bed z To K Ka H Warehouse Demo Room i Import Map 1 Select a device group 2 Click the link on the screen or click Import Map Choose a map file from the folder to upload or update E map The map format could be BMP or JPEG 3 Locate devices on the E map Drag and drop device icon to the desired location Camera with Alarm In and Alarm Out settings will have an Alarm In icon and an Alarm Out icon next
85. n Method Click to select all HDDs and then click to begin QOL PLL Setting Logout Help Technologies Ine Create Array Array Type RAID 5 v Array Name Default Cache Policy Write Back v Block Size 64K A Number of RAID5 member disks 3 Select All Stauen Model Capacity Max Free e5 1 1 ST31500341AS 9VS4CCS0 1 50 TB 1 50 TB E lt Eg 1 2 ST31500341AS 9VS4FZ7C 1 50 TB 1 50 TB ES El 1 3 T31500341AS 9VS4GP90 1 50 TB 1 50 TB MI 1 4 T31500341AS 9VS4EA9B 1 50 TB 1 50 TB MI 1 5 T31500341AS 9VS4FRQS 1 50 TB 1 50 TB 7 E 1 6 ST31500341AS 9VS4G724 1 50 TB 1 50 TB v Sal 1 7 ST31500341AS 9VS4FZCZ 1 50 TB 1 50 TB Available Disks d GJ 1 8 ST31500341AS 9VS4EZRB 1 50 TB 1 50 TB v E 1 9 ST31500341AS 9VS4EFTR 1 50 TB 1 50 TB 15 A message will appear upon completion Message from webpage RAID 5 Array RAID_5_0 has been created successfully Disk 2X 1 5T31500341A5 9V CCS 1 1 Disk 2 5T31500341A5 9VS4FZ7C 1 2 Disk 3 573150034145 9VS4GP90 1 3 Disk 4 5T3150034145 9V44 EAB 1 4 Disk 5 573150034145 9VS4FROS 1 5 Disk 6 73150034145 9VS46724 1 6 Disk ST31500341A5 9VS4F2C7 1 7 Disk 8 73150034145 9VS4E RB 1 8 Disk 9 5T31500341 45 9VS4EFTR 17 9 Disk 10 ST3150034145 9VS4FPC5 1 10 Disk 11 573150034145 9VS4FCB1 1 11 Disk 12 T31500341 45 9VS4 FP6L 1 12 Disk 13 5T31500341 45 9VS4FP G4 1 13 Disk 14 5731500341 45 9VS4FPS1
86. n one of the search results to play the footage on Playback screen Check on the Manual Search box for narrower search a Select one result from the 9 grid screen and click Start Time Select another result from the 9 grid screen and click End Time b Click Expand to execute more detailed search H BR 91 i o BANE OSSS5888 See eee IP Security Solutions Provider SEESSSEEES A member of VisionSoft View Log G Start Time Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA E mail sales telexper com a http www telexper com ISO 9001 2008 2010 0847 14 38 08 Alarm Log allows you to see all events with camera name alarm End Time type start and end time 2010087 16 01 42 Cameras MM el 5 YGA 7 MTaM131 1 3M D 473 3 D 475 DA D 47g D 48581 D 483 D 485 D 487 D 497 D 499 Dan Den D 449 DAS Alarm Type lODevice Sensor Loss Motion Disconnect Sort Start Time Descending Search Click View Log from the main menu Adjust Start Time End Time Alarm Type and Sort Order to filter the search Click Refresh to confirm the criteria Double click the alarm log to start the video audio playback Click Cancel to exit 92 E m S IP Security Solutions Provider ett A member of VisionSoft http www telexper com T
87. ng Ho City PER Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EA uses E mail sales telexper com ISO 9001 2008 nVR RAID 5 Setup Guide 1 Insert HDD to NVR and restart the system A pop up window see picture below will to stop the program appear Click nie LEM PROCESS Click Tenuate to stop Program On your system desktop double click HighPoint Web RAID Management shortcut HighPoint Web RAID Internet Explorer will be initiated automatically Please select Continue to this website not recommended to continue to the main page of HighPoint Web RAID Management https localhost 7402 Sur Favorites 933 Suggested Sites BI Web Slice Gallery E Certificate Error Navigation Blocked x There is a problem with this website s security certificate The security certificate presented by this website was not issued by a trusted certificate authority Security certificate problems may indicate an attempt to fool you or intercept any data you send to the Server We recommend that you close this webpage and do not continue to this website Click here to close this webpage Gei More information RH a 23 HHE JSS 8888 LL O RSSSRRRR IP Security Solutions Provider WW UU Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 662
88. on the channel you want to control to open the I O control panel See Chapter7 CMS I O Device Alarm In Click Alarm In button for disable this function Alarm Out es Click Alarm Out button for TTL signal output Snapshot ial CMS can take and save a single screenshot at the maximum resolution for the selected channel Click a channel on the live screen and then press Snapshot button to save the image as a JPG file To view or change the image folder go to Setup MISC to update the Snapshot Folder See Chapter CMS Setup Menu for MISC 57 A member of VisionSoft View Log ZS Tel 886 2 6620 5898 Fax 886 2 6620 6909 Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C EGA E mail sales telexper com http www telexper com Click on Alarm Log button to open User Log or Alarm Log 1 User Log User Log documents the user access information 2 Alarm Log Alarm Log allows you to see all events with camera name alarm type start and end time Double click the alarm log to start the video audio playback Click Cancel to exit Alarm List 4 Alarm List shows the 50 latest alarm messages Click the highlighted event to acknowledge the alarm Check Popup when Alarm Occurred box to bring up Alarm List when an alarm is triggered You may update the status of the new alarm to Unresolved Resolved or Pending Once the status is updated the ev
89. onSoft http www telexper com O Play NVR Records Play Local Records Then the CMS server will connect to the video recording database and display all the recorded video flies of the cameras from NVR or Local server according to the recorded video images from the cameras which you have selected might be different from Live View The Playback mode of the CMS helps you to easily display those channels which you want to review by group q Group BY Auto The system will display the cameras according to their names consequential order warehouse 1 warehouse 2 warehouse 3 etc to play back You can click on each group title to play the recorded image simultaneously in channels of 4 9 13 16 32 and so on 3 Group BY Nosort The system will display the cameras randomly warehouse 1 purchase 2 production 1 etc to play back You can click on each group title to play the recorded image simultaneously in channels of 4 9 13 16 32 and so on oF Group BY Device Group el The system will display the cameras according to their GROUPS consequential order Group 1 Group 2 Group 3 etc to play back You can click on each group title to play the recorded image simultaneously in channels of 4 9 13 16 32 and so on 85 SD WB tt IP Security Solutions Provider eet Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2
90. ons Provider mz Max Size Percent Status Full Recording Close ke Add total size which depends on the HDD spec The space which the recorded files had already taken The size of the HDD which you defined for recording The HDD percentage of the recorded files Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA D E mail sales telexper com RE A member of VisionSoft http www telexper com ISO 9001 2008 E Mail Sender Email Account Info Example Name Name Central Management Server From From CMS Sample CMSSampl LANDevice Device SMTP Serer SMTP Sewer CMSSample com WAN Device ss Login Login CMSSample Device Group Password i Password E map Import From Outlook Express r Import Alarm Schedule eases Import From Micorsoft Office Outlook Recording Schedule Import E Mail d Send a Test Mail keck Send User Management Jg Misc S z Attach Alarm Image Advance Fe b Subject Recipient Addresses 2010 12 15 17 27 04 E 200 nt 0 ge THA SORE MEF C Send mail if alarm occurred SRS ree sitet a SE SS ni Add Mail Address Remove Mail Address 1 Input user Sender name sender s email address sender s SMTP server and sender s email accounts user name and password If you have Outlook Outlook Express insta
91. place which you can read whenever you need 1 Keep the Video Servers away from water wet hot flammable area or with heavy moisture Check the existing electric environment if it s applicable 9OV 240V AC before use Avoid to operate it in high temperature environment Please put the Video Server and Hub in a flat stable place to operate GE gf E Do not disassemble the product arbitrarily This symbol indicates that personal injury may occur or the product may be WARNING KH damaged when you fail to follow the given instruction This symbol indicates that property loss may occur or the product ma E CAUTION y EE y P y malfunction when you fail to follow the given instruction n B O BE o BEEE WB rm o BEEBEE ETT EA IP Security Solutions Provider O DRRSSSRRSSR Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 D E mail sales telexper com SCH A member of VisionSoft htto Avww telexper com SO 9001 2008 Table of Contents Chapter WE e UN 1 Chapter 2 IP Component Hardware Introduction cccccsceeeeeseseneeeceeeeeeeeeseneeneoeeseesones 6 Network IP Cameras E 6 nCam Series VGA 1 3M 2M High Resolution CCD High Speed Dome l sasssnnsnnnnnnnnnnnnnnnnnnnnnnnnnnnennnnnnnnnnnn 6 WCCO SONY CF ara E E E G 8 OS TC EE 8 VOCS E E 10 Model nVS 16 SUD iaoaictescertweaiic ec tiesicentectpacese
92. s ence nee ed ee E E E 57 PUVA HIN E A A ATA T A T A A AE T E T A T 57 A OU e E S E E E E 57 MS OE EE 57 VIEW CH 58 Alarmi LIS E 58 BO OU AAE E E A A A A A T A IE I A O O E E E A A A A A AA 58 Eege 58 Chapter 7 CMS Setup MCI tegen eege a 59 LAN DEVICE ee 59 Video S6rver IP Camera EE 61 Alarm In and Alarm e TE due E 63 BR aand FIZ CODO E 63 Acknowledge Alarm EVE E 64 Alarm NO EE 64 Monitor Video Dieter 65 Network Video e te sciiossianrese nanoen EE a e E EET EE EERO 68 WAN Eegeregie 70 DEVICE GI OUD WEE 73 E ME 74 Alarm SCHE TT EE 75 Ke e Tute Eet UE UN 76 eier 79 User Mal AG CIC IID EE 80 IIIS GEN ANG OUIS sara san tenccesi canes andesthaviadeetectensetstanvenbstcolssndadnantusnanerauactansedantiaucannciasvansuiaildiaguelasteuasdsawesnneass 81 PN ne E E 82 Chapter 8 CMS Playback Mode EEN PR a S IP Security Solutions Provider SEE ESSEEE8 Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 A member of VisionSoft Te a ISO 9001 2008 Basie FAV TEE 86 RI Seale a PIVAC K eee eee eee ane ne eee eee et ee ee ee ee eee eee ee eee 86 Event PIA VO ACN eenegen 87 NA ON EE 88 Playback Main Menu un e EE 89 EENEG 89 HS nage cineea geehrt hee 89 If EONO E 89 IN OC srcs cttcasectccecicccstecacadncnsesqcctenaactnceatsnnacenenacceeconsgieeseecassececetnonsesesotenancstceassanacenenagaceesseceeesagnaocseeseseneseatene
93. s tii net 34011 Ta 18 VideoServer 192 168 6 3 34000 O040A25006C3 192 168 6 3 192 168 6 254 10 NO 0040425006C3 homeplus tii net 34003 Ta 18 VideoServer 192 168 6 16 34000 O040A250062C 192 168 6 16 192 168 6 75 10 NO 0040A250062C homeplus tii net 34016 T 18 VideoServer 192 168 6 18 34000 0040A2500630 192 168 56 18 192 168 56 75 10 NO 004042500630 homeplus tii net 34018 T 18 VideoServer 192 168 6 12 34000 O0040A25005F3 192 168 6 12 192 168 6 75 10 NO 0040425005F 3 homeplus tii net 34012 Te 18 VideoServer 192 168 6 17 34000 O040A25005F 1 192 168 6 17 192 168 6 75 10 NO 0040A25005F 1 homeplus tii net 34017 Ta 18 VideoServer 192 168 6 9 34000 O040A25005F5 192 168 6 9 192 168 6 254 10 NO 0040A25005F5 homeplus tii net 34009 W 17 MultiPD 192 168 6 31 34000 0040A2B012C9 192 168 56 31 192 168 656 254 10 NO 0040A2B012C9 homeplus tii net 34031 a 17 MultiPD 192 168 68 43 34000 0040A2B00FD9 192 168 65 43 192 168 656 254 10 NO 0040A2B00FD9 homeplus tii net 34043 fa 17 MultiPD 192 168 6 56 34000 0040A2B01071 192 168 56 56 192 168 656 254 10 NO 0040A2B01071 homeplus tii net 34056 Ta 17 MultiPD 192 168 68 39 34000 0040A2B801032 192 168 6 39 192 168 6 254 10 NO 0040A2B01032 homeplus tii net 34039 Ta 17 MultiPD 192 168 56 58 34000 0040A2B01195 192 168 56 58 192 168 6 75 10 NO 0040A2B01195 homeplus tii net 34058 T 17 MultiPD 192 168 6 50 34000 0040A2801079 192 168 6 50 192 168 656 254 10 NO 0040A2B801079 homeplus tii net 34050 T 17 MultiPD 192 168 56 54 34000 O040A2B01077 192 168 56
94. se El O Shutdown NVR EI C Enable Disable Alarm Beep Advance G O Exit System Live View Privileges Specifically for User O d SSD ore LL eel Add Group Add User Remove Change Password ER 1 Add Group Add Group Click Add Group to create a new group Add User Add User Select a user group you want the new user to be under and click Add User to create a new user and Password 2 Remove Remove Select a member or group and click Remove 3 Change Password Change Password Select a user and click Change Password to update user password 4 Privileges Group Privileges Live View Privileges Select a user group check or uncheck the privilege boxes and then click Save to confirm Please note that all changes will apply to all the users in that associated group e 80 est Wl ze mm EEREN eee IP Security Solutions Provider SEE ESSEEEE Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 W E mail sales telexper com 047 A member of VisionSoft http www telexper com ISO 9001 2008 Miscellaneous Miscellaneous page listed the language settings PTZ settings SNTP settings and etc 2010112130 11 45 27 a a D r sx Version 2 0 61 11 Language LAN Device ai Language English v WAN Device Snapshot Folder l Device Group D Destination Path
95. t is not recommended to install Visit us at the ncs again Software List Page CMS Central Management System Actual CMS is varied on the nCS computer E EECH IE Surveillance Software To install the ww Slivelliance sorware S RemoteCMS software G IP address Setup To install the IP tool Previous Previous Go back to main menu page Visit us at NOTE Installing both CMS and LVC on the same computer is not allowed CMS Lite Version does not include Local View Client software Please note that it is not recommended to install third party software on the nCS Network Commander Station as installing third party software will lower the system s performance and even cause the crash of the CMS system Must you install the extra software provided by third party then please keep the following in mind Do not install the software on the system driver Installing the extra software on the E system driver C will cause the system crash Please attached the HDD and install the software on the HDD 32 a E CE IP Security Solutions Provider Rett tt Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 D E mail sales telexper com lt A member of VisionSoft http www telexper com SO 9001 2008 System Requirements for the LVC and RemoteCMS Software Telexper IP CCTV Solut
96. tem allows you to create your own device groups to manage all the devices on the system For device group settings please refer to the Chapter7 CMS Setup Menu All Cameras does not count as a group Only the customer defined groups can start up the Monitor TV Wall function All Cameras only shows all the cameras which were auto detected by CMS system Sequence Sequence Sequence rotates and plays camera groups in every designed time frame 1 Click Sequence check boxes of the group you wish to play and then select the time interval 5 60sec min hr 2 Click Start Sequence to start or click Exit to cancel 3 Click Stop Sequence to return to normal live view Interval E eler start Sequence Exit e 53 Snie Wl ze mm EEREN eee IP Security Solutions Provider SEE ESSEEEE A member of VisionSoft http www telexper com Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA EA E mail sales telexper com Screen Display Camel A L Supports the 4 8 9 10 13 16 25 36 64 display CMS Lite version supports 16 display Hybrid 16 version supports 36 display Hybrid 32 version supports 64 display For Full Screen Display please help to click directly on the desired channel to select and then click again to switch to full screen Click again to return to the previous screen display
97. the network change the network setting to dhcp mode instead of static IP If in the network there is a DHCP who allocate IP then system will automatically change network setting to DHCP mode 82 E IP Security Solutions Provider WT A member of VisionSoft http www telexper com Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA EA E mail sales telexper com Proprietary Mode RTSP Mode Proprietary Mode This is the default mode that CMS do internally communicate with our products RTSP Mode This is the convenient mode that all hardware and software are able to do independently communicate together with supported RTSP without using CMS Backup CMS Settings Save the backup file bak to the desired directory Restore CMS Settings Import backup file bak to the current CMS The system will automatically restart Power off After System Exited Check this box to power off the system when users exit the system Show Live Screen Before Login Check this box to enable system to display live screen before login For LAN network without DHCP please uncheck the option of If a DHCP server present in the network change the network setting to dhcp mode instead of static IP and then insert information such as Static IP and Default Gateway e 83 omi o EEREN eee IP Security Solutions Provider
98. to change the settings of the WAN device which you selected Click on Remove _ to delete the settings of the WAN device which you selected 70 i IP Security Solutions Provider ETO Telexper International Inc PER 3F 3 No 2 Chien Pa Rd Chung Ho City Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 EGA E mail sales telexper com http www telexper com JS 9001 2008 A member of VisionSoft When you clicked the Add or Modify the WAN device settings menu will pop up then please select the of Camera Domain Port Login Password Confirm Type MAC Address 0040423001 34 Cancel Input the Domain of the RemoteCMS server and the port which was assigned to the remote IP camera also the login account with password of the RemoteCMS server The Domain information could be found on the Misc page 2009 10 06 16 44 30 Version Yersion 2 0 0 8 Sa Language LAN Device o Language English wl WAN Device Snapshot Folder Destination Path C Program Files DVR CMS Capture SE _ Alarm Schedule 2 R di eh Time Settings EMail bd Calibrate NVR Time User Management E Web Server Misc Enable Port 50 Audio Device Advance PTZ Controller C Enable PTZ Controller t eg mo DSLR SUE Sch Lu Oabledmeeleeee b icto phone and set volumn to maximum 2f d Domain OOUOGAT 121D homeplus tii net k I en i
99. ty PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 W E mail sales telexper com RW A member of VisionSoft http www telexper com ISO 9001 2008 Chapter 13 IE Remote Connection Settings Directly use the IE browser to connect the CMS CMS server provide WEB interface for users to use the IE Browser connecting to the CMS server Users can use IE Browsers to watch and operate the cameras with their settings The WEB connection settings list below 1 Close the setting page after the setting was done and restarts the IE browser Input the CMS server WAN IP which you want to connect as example http 122 116 169 208 the system will ask you to install the required ActiveX component press the Install few time for each prompt RemoteCMS Windows Internet Explorer Or de E 122 116 169 208 le a e x US 2 qip Favorites qh Suggested Sites i Free Hotmail A3 Click here to install the following Active contol RermoteCM cal fiom Telexper Intemational be What s the Risky Information Bar Help EI Done Internet Fo 100 n am Bi 103 TTC Wl ze o LL eee IP Security Solutions Provider WU Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C Tel 886 2 6620 5898 Fax 886 2 6620 6909 E mail sales telexper com http www telexper com JS 9001 2008 A member of VisionSoft
100. y of the Soeed Dome in the current market has OSD preset value at 95 Please select 95 for preset value click Go and then click 50 to call out OSD window Note If you were not able to call out the OSD window please refer to the manufacturer s camera user manual ANGUAG ENGL I SH 3 lt DISPLAY SETUP gt lt DOME SETTINGS gt lt SCHEDULE SETUP lt SYSTEM INFORMAT ON lt CAMERA RESET lt REBOOT SYSTEM SAM 56 IP Security Solutions Provider A member of VisionSoft http www telexper com IP Security Solutions Provider ETOO Telexper International Inc 3F 3 No 2 Chien Pa Rd Chung Ho City PER Taipei 235 Taiwan R O C EGA Tel 886 2 6620 5898 Fax 886 2 6620 6909 E mail sales telexper com 3 Using the PTZ joystick on the CMS to operate the OSD window Click 22 kl to enter and click 7a to close the OSD window Click the listen icon on a live channel to enable the Listen function Click again to disable the function Please make sure the Audio In box of this device is checked when you setup this LAN Device See Chapter CMS Setup Menu for LAN Device setup Broadcast 4 Click the Broadcast button to transmit audio to the selected device Click again to disable the function Please make sure the Audio Out box of this device is checked when you setup this LAN Device See Chapter CMS Setup Menu for LAN Device setup I O Device Ca You could click the icon

IP CCTV Solution Central Management System User Manual

Contents

Download Pdf Manuals

Related Search

Related Contents