Quick Start Guide 11b/g Wireless SOHO Router
Contents
1. WAN Access Type Select PPTP from the drop down list This type of connection is used when your ISP has provided you a dedicated IP address IP Address Enter an IP address for this device which is assigned by your ISP Subnet Mask Enter the subnet mask for this IP address which is assigned by your ISP Default Gateway Enter the IP address of the default gateway which is assigned by your ISP Click on the Apply Changes to save the changes Quick Start Guide v 1 1 11b g Wireless SOHO Router 4 Please refer to the User s Manual in the CD ROM for complete instructions Quick Start Guide 11b g Wireless SOHO Router Wireless Settings 7 Click on the Basic Settings link under the Wireless menu on the navigation drop down menu These options allow you to enable disable the wireless interface switch between the 11b g and 11b radio band and channel frequency Wireless Interface Place a check in this box to disable the wireless interface it is enabled by default Band Select the IEEE 802 11 mode from the drop down list For example if you are sure that the wireless network will be using only IEEE 802 11g clients then it is recommended to select 802 119 only instead of 2 4 GHz B G which will reduce the performance of the wireless network You may also select 2 4GHz B or 2 4GHz G SSID The SSID is a unique named shared amongst all the points of the wireless network The SSID must be identical on all points of the wireless network and cann2. the changes WAN DHCP Client Dynamic IP 4 WAN Access Type Select DHCP Client from the drop down list This type of connection is usually used when the ISP will supply the IP address and DNS settings This is also known as Dynamic IP Host Name Specify a host name for this device DNS The ISP usually automatically assigns the DNS IP address in case you need to assign it manually then click on the Set DNS Manually and fill in the fields Click on the Apply Changes to save the changes WAN PPPoE OF a 8 WAN Access Type Select PPPoE from the drop down list This type of connection is usually used for a DSL service and requires a username and password to connect User Name Specify the user name which is provided by your ISP Password Specify the password which is provided by your ISP Service Name Specify the name of the ISP Connection Type Select Continuous always online Connect on Demand connect to the ISP only when you click on a website or Manual connect to the ISP only when you click on a Connect button from the drop down list Idle Time The PPPoE service can automatically disconnect if the connection is idle Specify the number of minutes after between 1 and 100 DNS The ISP usually automatically assigns the DNS IP address in case you need to assign it manually then click on the Set DNS Manually and fill in the fields Click on the Apply Changes to save the changes WAN PPPoE Ot BN
3. Quick Start Guide 11b g Wireless SOHO Router the 2 4 GHz frequency spectrum supporting the 802 11b 2 4GHz 11Mbps and the newer faster 802 119 2 4GHz 54Mbpswireless standard High output power and high sensitivity can extend range and coverage to reduce the roaming between APs to get more stability wireless connection lt also can reduce the expense of equipment in the same environment To protect your wireless connectivity this device can encrypt all wireless transmissions through 64 128 bit WEP data encryption and also supports WPA2 WPA 802 1x_ for powerful security authentication The MAC addresses filter lets you select exactly which stations should have access to your network IE 11b g Wireless SOHO Router operates seamlessly in Front Panel DC Connector LAN Ports 1 4 WAN Port Reset button Antenna Connector Rear Panel Power LED WLAN LED WAN LED Connection Activity LED Label Description LAN Ports 1 4 Use an Ethernet cable to connect each port to a computer on your Local Area Network LAN WAN Port Use an Ethernet cable to connect this port to your WAN router DC Connector Use the power cable and connect the adapter to the power socket on the wall and the DC inlet into the DC connector Antenna Connector Connect the omni directional antenna to the SMA connector LED LAN ports This LED will light up once an Ethernet cable is connected to WAN Internet port WLAN LED This LED will light up once t
4. Thiieh Gateway DHCP DHCP Clie Range Demiin Name a01 ld Spanning Tree Che MAC Ahr from the drop down list This device will act as a DHCP 8 Click on the Apply Changes to save the changes Note If you change the IP address here you may need to adjust your PC s network settings to access the network again The computers and other devices connected to your LAN also need to have their TCP IP configuration set to DHCP or Obtain an IP address automatically Please refer to the user s manual in the CD ROM to configure the advanced settings Quick Start Guide v 1 1 11b g Wireless SOHO Router 3 Please refer to the User s Manual in the CD ROM for complete instructions Quick Start Guide 11b g Wireless SOHO Router WAN Settings Click on the WAN Interface link on the navigation drop down menu This feature allows you to configure the WAN interface using a static IP DHCP Client dynamic IP PPPoE or PPTP Follow the steps below to configure the WAN interface WAN Static IP Or a IY WAN Access Type Select Static IP from the drop down list This type of connection is used when your ISP has provided you a dedicated IP address IP Address Enter an IP address for this device which is assigned by your ISP Subnet Mask Enter the subnet mask for this IP address which is assigned by your ISP Default Gateway Enter the IP address of the default gateway which is assigned by your ISP Click on the Apply Changes to save
5. encryption Note that if the bridge uses the AES option the bridge can associate with the access point only if the access point is also set to use only AES The device negotiates the cipher type with the access point and uses AES when available Pre Shared Key The key is entered as a pass phrase of up to 63 alphanumeric characters in ASCII American Standard Code for Information Interchange format at both ends of the wireless connection It cannot be shorter than eight characters although for proper security it needs to be of ample length and should not be a commonly known phrase This phrase is used to generate session keys that are unique for each wireless client Authentication Radius Sever If you have selected Enterprise Radius as the authentication type then you must specify the RADIUS port number IP address and password Click on the Apply Changes to save the changes Quick Start Guide v 1 1 11b g Wireless SOHO Router 5 Please refer to the User s Manual in the CD ROM for complete instructions
6. he RF wireless LAN feature is enabled Power LED This LED will light up once the power cable is connected to the DC connector Quick Start Guide v 1 1 11b g Wireless SOHO Router 1 Please refer to the User s Manual in the CD ROM for complete instructions Quick Start Guide 11b g Wireless SOHO Router Hardware Installation 1 Place the unit in an appropriate place after conducting a site survey 2 Plug one end of the Ethernet cable into the LAN port of the device and another end into your PC Notebook 3 Plug one end of another Ethernet cable to WAN port of the device and the other end into you cable DSL modem Internet 4 Insert the DC inlet of the power adapter into the port labeled DC IN and the other end into the power socket on the wall Ethernet Ethernet WLAN Router AC DC cable Power Outlet Cable DSL Modem IP Address Configuration The default IP address of the device is 192 168 1 1 In order to log into this device you must first configure the TCP IP settings of your PC Notebook 1 In the control panel double click Network Connections and then double click on the connection of your Network Interface Card NIC You will then see the following screen 2 Select Internet Protocol TCP IP and then click on the Properties button This will allow you to configure the TCP IP settings of your PC Notebook 3 Select Use the following IP Address radio button and then enter the IP addres
7. ot exceed 32 characters Channel Select a channel from the drop down list The channels available are based on the country s regulation Show Active Clients Click on this button to view a list of clients that are associated with this device Click on the Apply Changes to save the changes Wireless WEP Encryption 5 Encryption Select WEP from the drop down list in order to enable WEP security and then click on the Set WEP key button Key Length Select a 64 bit or 128 bit WEP key length from the drop down list Key Format Select a key format such as HEX or ASCII from the drop down list Encryption Key You may use up to four different keys for four different networks Select the current key that will be used Click on the Apply Changes to save the changes Wireless WPA WPA2 Mixed Encryption Encryption Select WPA or WPA2 Mixed from the drop down list in order to enable WPA security WPA Authentication Mode Select Enterprise Radius or Personal Pre Shared Key If you select Enterprise radius then the pass key is located on the RADIUS server however if you select Personal Pre Shared Key then you may assign a key on this configuration page WPA WPA2 Cipher Suite Select TKIP or AES as the cipher suite The encryption algorithm used to secure the data communication TKIP Temporal Key Integrity Protocol provides per packet key generation and is based on WEP AES Advanced Encryption Standard is a very secure block based
8. rver of Access Point Empty user name and password will disable the protection User Name john New Password Confirmed Password ee 4 Click on the Apply Changes to save the new user name and password Use the new settings to log into the device in the future LAN Settings 1 Click on the LAN Interface link on the navigation drop down menu This feature allows you to configure the LAN interface using a static IP address or as a DHCP server client This IP address is also used to access the web based interface 2 IP Address Enter an IP address for this device 3 Subnet Mask Enter the subnet mask for this IP address 4 Default Gateway Enter the IP address of the default gateway 5 DHCP Static IP If you use a Static IP address select Disabled from the drop down list 6 DHCP Client If you select DHCP Client you are not required to enter the rest of the fields as the IP address will be provided to the device by the AP or DHCP server 7 DHCP Server If you select DHCP Server server and assign IP address to it clients LAN Interface Setup This page is used to configuee the paranti chage tbe t IP Address Suhet Mack Default Gateway DHCP DHCP Chent Range Demain Name R024 Spanning Tree Clone MAC Address Apply Changos LAN Interface Setup Bi page ii iibi to corde the parameters for bcil ina aik wach cae he eing Por I eiberes cote mark OHOP Fic IP Abiri Nabari Yaak
9. s 192 168 1 21 and subnet mask 255 255 255 0 Ensure that the IP address and subnet mask are on the same subnet as the device 4 Click on the OK button to close this window and once again to close LAN properties window Logging In 1 To configure the device through the web browser Bicablete ioadine name tharille Cicstan enter the IP address of the device 192 168 1 1 into File Edt wew Go Bookmarks Tools Help the address bar of the web browser and press Enter http 192 168 1 1 2 After connecting to the IP address the web browser will display the login page Specify admin for both the a a a a ea RE User Name and Password and then click on the User Name admin Login or OK button 3 Once you have logged in you man configure the Password WAN LAN and Wireless settings Please refer to the users manual in the CD ROM to configure these j parameters Quick Start Guide v 1 1 11b g Wireless SOHO Router 2 Please refer to the User s Manual in the CD ROM for complete instructions Quick Start Guide Administrator Settings 1 Before you commission the device it is necessary to change the default user name and password Click on the Password link under the Management navigation menu 2 Specify a new user name 3 Specify a new password and then re type the password in the next field for confirmation 11b g Wireless SOHO Router Password Setup This page is used to set the account to access the web se
Download Pdf Manuals
Related Search