GUARD standby user manual
Contents
1. Dimension mm 340x97x170 350x120x200 Dx W x H Function cold Start Availability to switch on from batteries RS 232 Available at AP Models Normal Operation 0 95 humidity non condensing 0 40 anes Audible Noise lt 45 dBA 1 meter from surface t ery ical2. IMPORTANT SAFETY INSTRUCTIONS WARNING SAVE THESE INSTRUCTIONS This manual contains important safety instructions Please follow up all instructions carefully during installation Read this manual thoroughly before attempting to unpack install or operate STANDBY UPS CAUTION To prevent the risk of fire or electric shock please install the unit in a temperature and humidity controlled indoor area which is free of conductive contaminants CAUTION Risk of electric shock do not remove the cover No user serviceable parts Refer servicing to qualified service personnel CAUTION Risk of electric shock Hazardous live parts inside this UPS can be energized from the battery supply even when the input AC power is disconnected CAUTION Risk of electric shock Battery Circuit is not isolated GUARD STANDBY SERIES from AC input hazardous voltage may exist between battery terminals and ground Please test it before touching S00VA to 1500VA NOTICE The UPS is designed for computer loads only Uninterruptible Power System USER MANUAL 1 INTRODUCTION Please read and save this manual Thank you for selecting this uninterruptible power system UPS It provides you with a perfect protection for connected equipment The manual is a guide to install and use the UPS It includes important safety instructions for operation and correct installation of the UPS If you should have any problems with the UPS please refer to this m
3. anual before calling customer service 2 PRESENTATION Standby Technology provides a reliable power supply to the powered loads It has advanced microprocessor controller and LED Display Panel With the audible alarms it enables the consumer to be informed about the abnormal situation The UPS has the following benefits Microprocessor control Standby Technology Boost and buck Automatic Voltage Regulation AVR Intelligent Battery Management System LED Display Panel Line Battery AVR indications Soft Start Function For Critical Applications Over Low Voltage Protections Short Circuit OverLoad Over Discharge Protections Buzzer Alarm Function Optional Communication Port and Remote Monitoring Software Optional Phone Line Protection Compact size and user friendly operation 3 PLACEMENT 4 INSTALLATION amp OPERATION Inspect the UPS upon receipt Notify the carrier and dealer if there is damage The package is recyclable save it for reuse or dispose of it properly 1 Connect the UPS to the wall receptacle 2 Push on the Main Switch for 2 seconds to initialize the UPS 3 Connect your computer equipment with sockets of the UPS present on the rear panel 4 Try the field working condition by running some application programs on your computer and repeating step 5 Check if the UPS is initiated properly to support continuous operation IMPORTANT NOTICE Plug the UPS into the wall outlet to charge the UPS for over 8
4. hours before using the UPS Caution Do not connect a laser printer to the outlets These UPS s outlets provide battery power and surge protection to the equipment when utility voltage is outside acceptable limits 5 FRONT PANEL DEFINITIONS 1 2 3 1 POWER LINE BATTERY Mode 3 AVR Mode Regulation ON OFF BUTTON 6 REAR PANEL DEFINITIONS 1000 1200 1500VA 500 600VA 4 OUTPUT SOCKETS 5 FUSE 6 INPUT SOCKET 7 PHONE LINE Available at AP models 8 RS232 Port Available at AP models 4 7 STORAGE Store at 15 to 30 C 5 to 86 F charge the UPS battery every six months Store at 30 to 45 C 86 to 113 F charge the UPS battery every three months 8 TECHNICAL SPECIFICATIONS MODEL 800 600 1000 1200 1500 pon yara 500VA 600VA 1000VA 1200VA 1500VA Voltage 165 to 275V Frequency 50 or 60Hz 10 Nees RREA Simulated sine wave like rating voltage 15 Frequency Backup Mode 50 or 60Hz 1 Output AVR automatically increase output voltage 14 Auto Voltage above input voltage if 10 to 25 of nominal Regulation AVR AVR decrease output voltage 11 below input voltage if 7 to 25 of nominal Transfer Time 8 10 milliseconds Inpu Short Circuit Overload Over Discharge Over Low Voltage ype Sealed maintenance free lead acid batteries att Phys B Typical Recharge 8 10 hours to 90 of full capacity Poet WeightKg 55 6 10 n 12
Download Pdf Manuals
Related Search