Home

Sky02 3D Goggles User Manual Here

image

Contents

1. H CH gt to setup band of TX1 TX2 separately Long press lt CH CH gt separately to ext Band setup Short press lt CH gt or lt CH gt to setup channels Please press lt CH gt or lt CH gt at the same time to switch from custom to default mode e tis also ok to control the channels of the transmitter through the PPM signal To assign a Thirds switch in the remote control C H to CH C L to CH Connect 1PPM channel of the receiver to the Si port of the SKY201 to control mother channels e Connect another PPM channel of receiver to S2 of SKY201 in custom mode S1 for TX1 and S2 to TX2 Specifications SKY301 FOV 85 degrees Diagonal F NO F NO 3 0 Video output level 1 0Vp p Typ 75ohm Audio output level 2 0Vp p Typ 10Kohm Specifications SKY201 Modulate Wideband FM Modulate RF Output Impedance 50 ohm e22 i Video input level 1 0Vp p Typ 75ohm Video Band Width 8 0MHz Power supply DC 7 0V 26V 1 5A Power Consumption 12V input 7 5W Operating Temperature 0 70 Specifications SKY02 ISM 5 8GHz 32 Channel Diversity receiver Preset CH1 CH2 CH3 CH4 Frequen cy 5733M 5771M 5752M 5790M 5809M 5847M 5828M 5866M 5945 Custom A 5825 5805 5785 5765 5745 5725 5865M 5845M M M M M M M Frequen Wireless cy 5733M 5752M 5 11 5 90 5809 5828 5847 5866 90dBm 1dBm 2 X SMA 500hm 60 degrees D
2. L90 R90 120degree L60 R60 90degree L45 R45 Default90degree Tilt Tracking range 120degree UP60 DOWN60 90degree UP45 DOWN45 60degree UP30 DOWN Default 90degree Pan Correction setup for compensating Pan center offset 0 10 levels actual angles refers to rotation angle of the cradle head Tilt Correction setup for compensating Tilt center offset 0 10 levels actual angles refers to rotation angle of the cradle head Recording Please format the TF card firstly before record Recording is either ok in RF Mode or AV in Mode Screen displays ES fil memory card info gt Press lt gt 4 button to start record and lt red with recording time displayed Press lt PHOTO gt to capture in preview mode with click not ok while recording There is both video and audio in default It is ok to turn off audio in the system menu to record video only It is also ok to turn off the video record to save power Playback Button functions in playback Long press REC to enter playback in RF or AVIN mode Please don t connect the AV cable in playback mode HEC lt PLAY PAUSE OK gt PHOTO lt STOP BACK gt BAND lt PREVIOUS BACKWARD gt CHANNEL lt NEXT FORWARD gt TRACK lt DELETE gt Videos and photos are previewed directly in playback mode the last 4 number of the file displayed in top right corner and duration time for video clips PRESS CHANNEL BUTTON for 2X 4X 8X quick play and pre
3. MODE Mode Displayed when enable Fast 2D in 3D mode and also indicated the signal source from RX1 or RX2 Mode Displayed when close 3D mode or AV PLAYBACK FRONT CAMER Mode Mode Displayed when connected to PC It is ok to manage the memory card PLAY PAUSE M BACKWARD FORWARD POWER DC IN power screen displays DC IN Power by battery it is ok to select from 25 3S 45 5S 65 and displayed on the screen Mlindicates full power Llndicates low power CHANNEL Displayed in 3D Mode When enable Custom mode in 3D mode Band and Channeled of RX1 RX2 will also displayed Displayed BAND and CH in 2D Mode Transmitter Operation Instruction TX1 TX2 Antenna Antenna CH Display window PWM Power Connection Controlinput supply CAMERA Please make sure the antenna and transmitter are compatible otherwise the transmitter maybe damaged Please place the transmitter in well ventilated place and avoid to place in confined place or wrap the transmitter tightly Please don t touch the antenna or the mental parts to avoid burning by the parts e SKY201 has two digit LED display It showed channels in default channel mode and LEFT for TX1 band and channel RIGHT for TX2 band and channel in Custom channel mode Press lt CH gt lt CH gt to adjust the channels total 4 channels Long press lt CH gt or lt CH gt to enter Custom setup The display will flash quickly and then Press lt C
4. SKY ZONE WWW tecnic co uk SKY02 3D FPV GOGGLE USER MANUAL System Content FPV GOGGLE Carry case day Uu awe nme SKY201 Transmitter SKY301 Camera 5 8G 2dBi antenna X 4 On OR Futaba data cable JR data cable WFLY data cable UOS teo AV cable Power cable 2P TX Power cable Oz 6P Camera cable TX Remote control cable x2 Function Diagram Head Tracker Channel Band PHOTO REC Front Camera MENU UP DOWN ESC OK 3D 2D RX2 RX1 Antenna Antenna MicroSD USB IPD Adjustable Head Tracker data port Operation Instruction The FPV Goggles SKY02 with Built in 5 8Ghz Diversity Receiver and diversity Antenna inputs and two independent video display modules can bring you the 3D Vision FPV experience of flying It requests the 3D camera SKY301 and the dual transmitter SKY201 The two lens 3D camera that using the parallel shooting method will bring you strong 3D vision for close range shooting and weaker for long distance shooting But there will be more vivid visual experience as a whole The FPV goggles can also work in normal diversity mode which is in 2D vision And they are well compatible to SKY201 and most of other transmitters It supports 4 Bands and total 32channels Bands selection and Resulting Frequencies see details in Specifications Quick Start Guide Preparation Install the lens lens hood antennas and the TF card Connect the camera and transmitter and then power th
5. e transmitter and FPV goggles e Short press lt UP DOWN gt button to setup the same channel to the transmitter to view the image e Pull the IPD Adjuster to adjust the inter pupillary distance Buttons TRACK Button Short press the Track button to reset the Head Tracker in the normal mode Long press MENU button 3 seconds to enter MENU setup Switch between the 4 main menu with this button in MENU setup CHANNEL Button Short press to add channel in 3D RF mode Short press to in 2D RF mode multiple press for loop adjustment Long press 3 seconds to turn up the volume in 3D RF 2D RF AV IN PLAYBACK mode It s up button in MENU setup BAND Button Short press to reduce channel in 3D RF mode Short press to adjust the band in 2D RF Mode multiple press for loop adjustment Long press seconds to turn down the volume in RF 2D RF AV IN PLAYBACK mode It s down button in MENU setup REC Button Short press to start recording and press again to stop RF 2D RF AV IN mode It s OK button in MENU setup PHOTO Button Short press to capture in 3D RF 2D RF and AV IN playback Mode It s ESC button in Menu setup CAMERA Button Short press to switch to Front Camera mode in any mode Long press 3 seconds to fast switch to 2D from 3D RF Mode RF mode 3D mode e 3D mode in RF mode and will be in 2D in all other modes Press up down button to adjust the 4 default channels And it is also ok to custom the RF Band to select the proper ba
6. iagonal Front Camera 640X480 VGA FOCAL LENGTH F NO F NO 2 8 Magnetic Inertial and gyro PPM 8 channel Optional 5 6CH 5 7CH 5 8CH 6 7CH 6 8CH 7 8CH 5880 Head Tracker Support to 32GB MJPEG 30fps AVI Record NR E JPEG NTSC PAL AV Signal 1 0Vp p Typ 75ohm 1 0Vp p Typ 10Kohm Div AV Diversity Video Audio output AV Port DC IN DC 7 26V 1A Power Supply 12V input 5 4
7. nd and channels Caution there will be interference if select frequency too close The recommended frequency interval is 40MHz Long press lt CAMERA gt button to fast switch to 2D mode 2D mode hey will work in diversity mode if close the 3D mode in the menu And the setup in 3D mode will not Work e Press CHANNEL button to select channels and BAND for band multiple press to cycle Front Camera The Front Camera is Wide Angle Camera with 680X480 VGA Resolution and good low Illumination It s very convenient to view around without taking off the Goggles Press Camera button to open the Front Camera e Front Camera can neither be recorded nor display via AV OUT but for viewing around only It s ok to open the Front Camera while recording It s ok to setup the goggles with the Front camera turning on Image adjustment It s ok to adjust the Brightness Contrast Saturation Hue Sharpness Parameters in Image setup Menu Press REC OK button to enter setup and press UP DOWN to adjust press ESC to exit It s recommended to adjust while the image is good Head Tracker Please keep the goggles in horizontal position and steady initialization is ok when there is 1 beep Or short press the TRACK button short press the TRACK button with beep to setup the PPM to center Setup PPM CHANNEL the Menu CH5 CH6 CH5 CH7 CH5 CH8 CH6 CH7 CH6 CH8 CH7 CH8 Pan Tracking range 180degree
8. ss REC back to normal speed Press PHOTO button back to preview or play again or other actions Press TRACK button to delete the file and press REC to confirm The files captured from other devices may not be played properly AV input The goggles support AV IN The wireless model will close when the AV IN is connected to save power Please plug off the AV IN cable if playback and don t plug in while playing otherwise it will exit automatically AV output AV Outis the diversity Video and Audio output e Earphone port is audio output for connecting earphones Each boot is automatically set to the lowest volume to avoid sudden loud boot Format SD card Format SD card and press lt OK gt to enter setup press lt UP DOWN gt and select YES press lt OK gt again to format Caution all files will be deleted please operate sincerely Factory settings Enter system menu and select Factory settings press lt OK gt to setup press lt UP DOWN gt and select lt YES gt and the press lt OK gt to setup to factory default setting Screen OSD Overview Ex Recording Red while recording Red while record module is closed SD card is full or SD CARD error JAH Press PHOTO button once in video preview red once indicates one photo is captured 98 Memory card normal with capacity with GMB 1000MB and red when memory is full e Mode RF mode AV IN mode PLAYBACK mode Mode Enabled only RF

Download Pdf Manuals

image

Related Search

Related Contents

取扱説明書  Authoring Tools User Guide - Auro-3D  Digital Power Meter WT1600  Télécharger version française  IWILL K7S2 Series Motherboard  CCAP - Maintenance réseau & armoires  User`s Manual Rev C Model 1200  Troubleshooting Propane Mowers    取扱説明書(ルノー編)  

Copyright © All rights reserved.
Failed to retrieve file