NETGEAR DGN2200v3 Installation Guide cover, North America
Contents
1. DSL account number If you do not have voice service you can use your DSL account number in place of a phone number Missing User Name and Password If you don t know or cannot locate your user name and password call your DSL Internet Service Provider The following table lists the contact information for some of the primary DSL providers Be very specific when speaking with your DSL Internet Service Provider For example you could say I need my DSL service user name and password Can you help me Note If your provider says they do not support NETGEAR devices tell them you need only your DSL user name and password you do not need support DSL Internet Service Provider Phone Number AT amp T DSL not AT amp T U Verse 877 722 3755 AT amp T BellSouth DSL not AT amp T U Verse 888 321 2375 CenturyLink 800 809 1410 Covad DSL 888 642 6823 EarthLink 888 829 8466 Qwest 800 247 7285 SureWest 888 639 1611 TDS DSL Support 866 571 6662 US Family 800 300 4256 Verizon 800 567 6789 Windstream 877 901 4692 Install Your Modem Router A microfilter filters DSL interference out of standard phone equipment that shares the same line with DSL service Example devices are telephones fax machines answering machines and caller ID displays 1 Connect the ADSL a Install an ADSL microfilter between the phone line and the phone b Connect the ADSL port of the modem router to t2. NETGEAR does not assume any liability that may occur due to the use or application of the product s or circuit layout s described herein 13
3. S process The device will then be connected to your router 3 Repeat this process to add other WPS wireless devices Note WPS does not support WEP security If you try to connect a WEP client to your network using WPS it will not work Manual Method 1 On the wireless device that you want to connect to your router iPhone laptop computer gaming device open the software utility that manages its wireless connections This utility scans for all wireless networks in your area 2 Look for the preset NETGEAR WiFi network name SSID and select it The SSID is located on the product label on the bottom of the router Note If you changed the name of your network during the setup process look for that network name on the router 3 Enter the preset password or your custom password if you changed it and click Connect Repeat steps 1 3 to add other wireless devices Access the Modem Router to Make Changes After you use NETGEAR Genie to set up the modem router you can log in to the router to view its settings or make changes gt 1 To log in to the modem router Launch a web browser from a computer or wireless devices that is connected to the modem router Type www routerlogin net or www routerlogin com in the address field of the browser A login screen displays admin C Remember my password Cro Enter admin for the user name and password for the password The modem router interface screen
4. Technical Support Thank you for selecting NETGEAR products After installing your device locate the serial number on the label of your product and use it to register your product at NETGEAR com register Registration is required before you can use our telephone support service Registration through our website is strongly recommended Go to support netgear com for product updates and web support NETGEAR Inc 350 East Plumeria Drive San Jose CA 95134 USA 201 14076 03 October 2011 NETGEAR Connect with Innovation N300 Wireless ADSL2 Modem Router DGN2200v3 Installation Guide Package Contents The box should contain the following items If any items are incorrect missing or damaged contact your NETGEAR dealer N300 Modem Router The filter or m splitter provided v g feros 8 EY depends on the region Splitter Filter Splitter IS Phone cable Ethernet cable Power adapter You can use this diagram to connect your modem router or follow the instructions in this booklet Kuinua 2 1 KA Va EEEE A Internet 3 Computer 2 Power 4 Browser Compliance Declarations of Conformity For complete DoC please visit the NETGEAR EU Declarations of Conformity website at support netgear com app answers detail a_id 11621 For GNU General Public License GPL related in
5. displays See the User Manual for more information about the modem router screens To change the password for the modem router user name Log in to the modem router Select Maintenance gt Set Password to display the Set Password screen Set Password Old Password Set Password Repeat New Password Administrator login times out after idle for 5 minutes Apply Cancel 3 Type your old password and type the new password twice Troubleshooting If the browser does not display the web page Make sure that the PC is connected to one of the four LAN Ethernet ports or wirelessly to the router Make sure that the modem router is fully up and running Its WiFi LED should turn on Close and reopen the browser to make sure that the browser does not cache the previous page Browse to http routerlogin net If the PC is set to a static or fixed IP address this is uncommon change it to obtain an IP address automatically from the modem router 10 If the modem router does not power on 1 Check your cables e Disconnect and reconnect each cable There is usually an audible click when the cable is correctly connected e See if the telephone cable connecting your DSL modem router to the wall jack is plugged into a filter A filter is not required if you do not have telephone voice service A filter installed where it is not needed might eliminate your ADSL signal 2 Power down your DSL modem
6. formation please visit support netgear com app answers detail a_id 2649 This symbol is placed in accordance with the European Union Directive 2002 96 on the Waste Electrical and Electronic Equipment the WEEE Directive If disposed of within the European Union this product should be treated and recycled in accordance with the laws of m Your jurisdiction implementing the WEEE Directive Contents Banig OU POON IIIA Ii 2 Missing User Name and Password 3 Install Your Modem Router 4 Preset Wireless Security 6 Wireless Network Settings 7 Add Wireless Devices to the Network 8 AD PAA AA 8 Manual Method saang Gma NG APP ORANG KR GWN 8 Access the Modem Router to Make Changes 9 TGURISENOCING IIIA 10 ReadySHARE Access1 2 Other Features Before You Begin Make sure that your DSL service is active before you install the modem router You need the information listed here to install your DSL modem and connect to the Internet Please locate it and have it on hand before you start the installation procedure DSL user name and password These are usually included in the welcome letter your DSL ISP sent you when you signed up for your service Record your DSL Internet service account user name and password here User name Password e Your telephone number or
7. he ADSL port of the microfilter c Use an ADSL microfilter for every phone line in the house if your modem router and telephone connect to the same phone line 2 Add power to the modem router IN pista tom LL Internet a aasal a Connect the power adapter to the router and plug the power adapter into an outlet b Wait for the WiFi LED on the front panel to turn on If none of the LEDs on the front panel are on press the Power On Off button on the rear panel of the modem router 3 Connect a computer You can use an Ethernet cable or connect wirelessly ga E QW KO Internet mp pasa8aagg f BALLET e Use the yellow Ethernet cable to connect your computer to an Ethernet port on your router e Or connect wirelessly by using the preset wireless security settings located on the label on the bottom of the router 4 Open a browser If a web page does not open close and reopen the browser and enter http routerlogin net in the address bar See Troubleshooting on page 10 Preset Wireless Security This product has a unique WiFi network name SSID and network key password The default SSID and network key password are uniquely generated for every device like a serial number to protect and maximize your wireless security This information is located on the label on the bottom of the product NETGEAR recommends that you do not change the preset WiFi
8. network name SSID and network key password If you do change the settings the security SSID and password on the bottom of the product no longer apply A NETGEAR ter DGN2200v3 WiFi Network Name SSID CHO Me Paanu access Network Key Password Wireless Network Settings Record the default preset wireless settings that are printed on the label in the space below for easy reference WiFi Network Name SSID Network Key Password If you change the default settings record them here for easy reference and then store this booklet in a safe place WiFi Network Name SSID Network Key Password To retrieve or update your wireless password type http www routerlogin net in a web browser and log in using the default user name admin and password password Select Wireless Settings to locate your wireless password Add Wireless Devices to the Network Choose either the manual or Wi Fi Protected Setup WPS method to add wireless computers and other devices to your wireless network WPS Method If your wireless device supports WPS WiFi Protected Setup NETGEAR calls this method Push N Connect you might be prompted to press the WPS button on the router instead of entering a password If this happens 1 Press the WPS button 2 Within 2 minutes press the WPS button on the client device or follow the WPS instructions that came with your wireless device to complete the WP
9. router and then power it up again a Shut down your computer and turn off the modem router b Unplug the power adapter and all other cables from the back of the DSL modem router c Wait 30 seconds then reconnect the cables and adapter to your DSL modem router and turn it on d Make sure that the router power light is on If the light is off try plugging the adapter into another power outlet e Turn your computer back on and wait for the indicator lights to turn green 3 Open a web browser and try to access the Internet If steps 1 3 do not resolve the problem 4 Reset your modem To reset your DSL modem router use a pin or paper clip to press in and hold the Reset button 11 ReadySHARE Access After installation and set up you can insert a USB storage device into the USB port on the modem router and share the contents with other network users If your USB device has special drivers it is not compatible Note If your USB device requires a power supply you have to use it when connecting your USB device to a NETGEAR router or gateway It may take up to 2 minutes before the USB drive is ready for sharing after it is connected to the router To access your USB device On Windows systems use any of these methods e Select Start gt Run and enter readyshare in the dialog box Click OK e Open Explorer or Safari and enter readyshare in the address bar e Open My Network Places and enter read
10. yshare in the address bar On Mac systems do this 1 Select Go gt Connect to Server 2 Enter smb readyshare as the Server Address 3 Click Connect 12 The readyshareconnect exe file for Windows is available to download here www netgear com readyshare Other Features For additional features including Live Parental Controls Traffic Metering ReadySHARE Guest Access and more please log into your router at http routerlogin net 2011 NETGEAR Inc All rights reserved No part of this publication may be reproduced transmitted transcribed stored in a retrieval system or translated into any language in any form or by any means without the written permission of NETGEAR Inc DO NOT stack equipment or place equipment in tight spaces or in drawers Be sure your equipment is surrounded by at least 2 in of air space Trademarks NETGEAR the NETGEAR logo and Connect with Innovation are trademarks and or registered trademarks of NETGEAR Inc and or its subsidiaries in the United States and or other countries Information is subject to change without notice Other brand and product names are registered trademarks or trademarks of their respective holders 2011 NETGEAR Inc All rights reserved Statement of Conditions In the interest of improving internal design operational function and or reliability NETGEAR reserves the right to make changes to the products described in this document without notice
Download Pdf Manuals
Related Search