The SPD FED Server Preliminary Manual
Contents
1. HSCNF_DPI_DEF command to set the digital pilot settings with the default values HSCNF_DPI_INT_DEF command to set the digital pilot internal settings with the default values HSCNF_DPI_INT_DEF_ALL command to set the digital pilot internal settings with the default values in all enabled halfstaves HSCNF_DPI_INT_SET command to set the digital pilot internal settings HSCNF_DPI_READ command to read the digital pilot settings HSCNF_DPI_SET command to set the digital pilot settings HSCNF_DPICONF gets the current default configuration from the fed server for the digital pilot HSCNF_FILE_GET 14 command the read a file for certain channel HSCNF_FILE_GETNAME command to return the file name assigned to a certain channel HSCNF_FILE_LOAD command to load a file to memory I think it is connected with the fact that PVSS cannot read binary files should be there HSCNF_FILE_REFRESH command to reload a file for a certain channel HSCNF_GOLCONF gets the current configuration for the gol from the fed server HSCNF_JTAG_RESET performs a jtag reset in the halfstave its a IR scan only with IR code Oxb for the pixel chips HSCNF_NOISYPIX gets the default configuration in the fed memory from configuration file only HSCNF_PIX_UNMASK_ALL command to unmask all pixel chips HSCNF_PIXEL_DAC gets the current default configuration from the fed server for the pixel dacs HSCNF_PIXMASK_DEF command to set the matrix s2. and if it is the case please uninstall it and remove all references from this software from the path environmental variable 2 1 3 DIM installation Download the latest DIM from http dim web cern ch dim dim wnt html and follow the instructions If it is a development machine please add the lt dim path gt bin to the libs folder list and the lt dim path gt dim to the include folders list 2 1 4 Jam Player Installation This is used by the SPD FED server and by LABView software to program the ROUTER FPGAs Find a copy of the JamPlayer25 exe Executable and copy it somewhere in the system ex C JamPlayer Just remember the path where you have put it you will need this later 2 2 Installing the Software 2 2 1 Moving the software Compile and copy the SPD_FEDServer exe executable with a spdFedlni ini and MSVCRTD DLL to where you want to install it If all of the dependencies are installed and in the path environment of the machine you should not need any other DLL but just in case if you don t want to get into a DLL hell you might want to add dim dll and oraocci10 dll also 2 2 2 SPD FED Ini File After moving the FED server you now need to configure some generic settings in the ini file Open the spdFedlni ini file and you should see something like this General general settings of the FED side A debugMode fals debug mode DataBase database settings here conString DEVDB10 Fast Or Db us
3. the digital pilot bit 2 if it fails the analog pilot setting 3 if it fails the pixel dacs settings HSCNF_DATA_RESET_ALL command to set the digital pilot internal settings with the default values in all enabled halfstaves HSCNF_DB_COMPARE command to compare the data in the default containers and actual containers in the fed and save it to the temporary table in the database HSCNF_DB_DIFF_COUNT command to count the diferences between the data in the default containers and actual containers in the fed Returns McmbDifferences DacDifferences NoisyDifferences HSCNF_DB_GET command to get the current configuration of the detector from the database HSCNF_DB_GET_GLOBAL_VERSION command to return the current database global version loaded in the FED HSCNF_DB_GET_MASK_VERSION command to return the current mask noisy pixels version assigned to this fed server HSCNF_DB_GET_SIDE_VERSION command to return the current database side version assigned to this fed server HSCNF_DB_LINK command to link the two side versions of each fed in the global version in the database 13 HSCNF_DB_MASK command to mask the full detector with the data from the database Parameters versionNumber HSCNF_DB_SET command to save the current configuration of the detector in the database HSCNF_DEFAULTS_TO_FILE command to dump all default settings to file it will generate 60 files in the folder with the name defaultHS001 txt actualHS002 etc
4. time 6 0 8797 0 environment Dim Dim communication layer version 17r10 Oracle Instant Oracle interface 10 2 0 1 Client NiVisa National Instruments Visa libraries 4 3 0 2 FED Installation 2 1 Software Dependencies To install the SPD FED server in a machine please make sure to install the following software first with all environment variables correctly defined 2 1 1 VISA Drivers Installation and Configuration You can download the VISA drivers freely from the National Instruments website They usually come with LABView if you install have LABView already installed in this machine you can skip this installation Finally for the system to work we need to add the router VISA configuration Open National Instruments Measurement amp Automation and create anew VME device with the following settings System Number 0 Logical Address 300 Slot 1 Mainframe 1 Commander LA 0 VXI A32 Memory Space 0 0 OxFFO00000 2 1 2 Oracle Instant Client Installation For the SPD FED server we will need Oracle instant client version 10 2 xx xx If this is a DCS machine at point 2 you can ask the DCS group to install it they already use the correct version If itis not a DCS machine at point 2 then perform the following steps e download Instant Client from the Oracle web site http www oracle com technology software tech oci instantclient htdocs winsoft htm Please
5. COUNTERS new michele register RT_NUM_TRANS_BUSY_DAQ new michele register RT_NUM_TRANS_BUSY_HS new michele register RT_NUM_TRANS_BUSY_ROUTER new michele register RT_NUM_TRANS_BUSY_TRIGGERS_L1_FIFO new michele register RT_RD_EV_START RT_RDHISTO For the moment this feature is disabled the link receiver does not have histogram mode anymore RT_REGISTER function to access a register inside the router RT_RESET_BUSYRESOLVER 27 new michele register RT_RESET_DETECTOR RT_RESET_HS RT_RESET_LRX RT_RESET_PIXEL RT_RESET_TTC RT_RST_TEMPLIM RT_RSTBNC RT_RXREADY new michele register RT_SCOPE_SELECTORO RT_SCOPE_SELECTOR1 RT_SCOPE_SELECTOR2 RT_SELECT RT_SEND_TRIGGER RT_SPM Base address of the single port memory read only RT_STATUS1 RT_STATUS2 RT_STATUS3 RT_STATUS_JTAG_SELECT RT_STATUS_LINKRXO RT_STATUS_LINKRX1 RT_STATUS_LINKRX10 28 RT_STATUS_LINKRX11 RT_STATUS_LINKRX12 RT_STATUS_LINKRX13 RT_STATUS_LINKRX14 RT_STATUS_LINKRX15 RT_STATUS_LINKRX2 RT_STATUS_LINKRX3 RT_STATUS_LINKRX4 RT_STATUS_LINKRXS RT_STATUS_LINKRX6 RT_STATUS_LINKRX7 RT_STATUS_LINKRX8 RT_STATUS_LINKRX9 RT_TEMPERATURE RT_TEMPERATURE_LIMIT_BUS RT_TEMPERATURE_LIMIT_MCM RT_TIME_BUSY_DAQ new michele register RT_TIME_BUSY_HS new michele register RT_TIME_BUSY_ROUTER new michele register RT_TIME_BUSY_TRIGGERS_L1_FIFO new michele register 29 1011 11 D
6. ELAY Configurable Test pulse 11 delay like this calibration scans data taking scans have the same delay setting in the pixels RT_VERSION_NUMBER RT VERSION is already defined in winUser h file an old windwos file that we don t want to mess for sure VMERESET WRHISTO 30
7. FED Commands 4 1 Half Stave configuration HSCNF Commands HSCNF_ACTUALS_TO_FILE command to dump all actual settings to file it will generate 60 files in the folder with the name actualHSO01 txt actualHS002 etc 11 HSCNF_API__DACDEF command to set the dacs in the analog pilot with the default values HSCNF_API__READ command to read the dacs in the analog pilot Returns array with analog pilot values 0 Dac Ref High 1 Dac ref mid 2 Gtl Ref A 3 gtl ref D test high 5 test low HSCNF_API__READADC command to read the adcs in the analog pilot Returns analog pilot ADCs HSCNF_API__SET_ONE_DAC command to set only one dac of the analog pilot Parameters dac number follows the same order as in the jtag scan dac value HSCNF_API__SETDAC command to set the dacs in the analog pilot HSCNF_APIDAC gets the current default configuration from the fed server for the analog pilot dacs HSCNF_CONFIGURE_DEF command to configure an halfstave with the default values DPI and DACS Returns bit O is enabled if it fails in the jtag reset bit 1 if it fails setting the digital pilot bit 2 if it fails the analog pilot setting 3 if it fails the pixel dacs settings HSCNF_CONFIGURE_DEF_ALL 12 command to configure all of the halfstaves with the default values Returns an array with 60 elements each one with the status of the configuration it 0 is enabled if it fails in the jtag reset bit 1 if it fails setting
8. TEMPERATURE_ON command to start pooling the temperature Parameters refresh time ms CNF_READ_BUSY_ROUTER reads the router busy times and sends them all to PVSS 0 busy daq 1 busy router 2 busy HS 3 busy trigger CNF_READ_ROUTER_ERRORS Reads the error list in one router CNF_RESTART_LOG_FILE Renames the old FED log file and restarts a clean one CNF_RUN_START start of run commmand to initialize the run number variable CNF_RUN_STOP Stop of run variable to clean the run number variable 4 3 Scan SCN Commands SCN_DAC_RESTART Restarts a stopped dac scan SCN_DAC_START Starts dac scan Parameters TirggerNumber dacMin 18 dacMax steps dacNumber InternalTrigger WaitTime SCN_DAC_STOP stops a dac scan SCN_DELAY_RESTART Restarts a stopped delay scan SCN_DELAY_START Starts a delay scan Parameters TirggerNumber delayMin delayMax steps InternalTrigger WaitTime SCN_DELAY_STOP stops a delay scan SCN_FO_SCAN_START Starts a fastor calibration scan Parameters fopolMinimum 19 fopolMaximum fopolStep convpolMinimum convpolMaximum convpolStep comprefMinimum comprefMaximum comprefStep cgpolMinimum cgpolMaximum cgpolStep prevthMinimum prevthMaximum prevthStep NumberOffriggers Matrices SCN_FO_SCAN_STOP stops a fastor calibration scan SCN_FO_SCAN_TEST Used only to debug a fastor scan performs one single step of this scan SCN_MEANTH_RESTART Restarts a stopped mean threshold
9. The SPD FED Server Preliminary Manual Table of Contents The SPD FED 3 T FED SoftWare ELS 3 1 1 Eibr ries Used 2245 25 2021242220000 Dus 3 1 2 Development aaRS 4 1 3 Solution DEPENGENCIES ices uc tese ae Re a 5 1 4 Library and DLL 5 Z dz eH StallatiO tases c 6 2 1 Software 202 gerne 6 2 1 1 VISA Drivers Installation and 6 2 1 2 Oracle Instant Client Installation eee eeesseeeeeeneeeeeeneeeeeesaeeeeesaeeeeeeaeeeeeeeaaaaaeeeeeeeeeeees 6 2 1 3 DIM ihstallatiOri ies Sa ee tn ne seinen 7 2 1 4 Jami Player Installation oe Ete eaaet tee e ev tI en 7 2 2 Installing the 7 2 21 Moving tlie 50 tenet c Ba 7 2 2 2 SPD FED Ini File nee tes d Yee ve ve puse 8 2 2 3 Configuring SPD FED as a 9 FED Server DIM interface nennen nennen 9 3 1 EED Commands PM 9 3 2 Status Serv
10. calibration scan SCN_MEANTH_START Starts a Mean threshold calibration scan 20 Parameters dacMin dacMax Steps startRow endRow rowStep triggerNumber SCN_MEANTH_STOP Stops a Mean threshold scan SCN_MINTH_RESTART Restarts a stopped minimum threshold scan SCN_MINTH_START Starts aminimum threshold delay scan Parameters TirggerNumber pre_vthMin pre_vthMax steps InternalTrigger WaitTime SCN_MINTH_STOP stops a minimum threshold scan SCN_NOISE 21 Starts a noise scan Parameters TirggerNumber InternalTrigger SCN_NOISE_STOP stops a noise scan SCN_UNIFORMITY_RESTART SCN_UNIFORMITY_START Starts a Uniformity matrix scan Parameters TriggerNumber StartRow EndRow MaskNoActivePixels SCN_UNIFORMITY_STOP Command to stop an active uniformity scan 4 4 Register Commands The following are commands related to router link receiver or Busy card commands register These are always 32 bit registers the functionality will depend of the register itself please check the device documentation for further information Important Please add a R to the beginning to the command if you want to read W_ if you want to write in the register ex R_BSYCD_BUSYMASK to read busy card mask register W_BSYCD_BUSYMASK to write in the busy card register 4 4 1 Busy card Registers BSYCD_BUSYMASK Writes the busy card mask register BSYCD_CNCOUNTERS 22 BSYCD_CONTROL Writes the b
11. choose version 10 2 04 and not higher than this there incompatibility problems with other versions with the Visual Studio 2003 run time environment The recommended download is Instant Client Package SQL Plus if it is a development machine please download also the SDK e Unzip the instant client to a known location ex C Oracle instantClient e Add the database servers that the FED uses to the file tnsnames ora you can start by copying the one from the DFS path G Aplications Oracle ADMIN to the instant client folder This contains all CERN Oracle servers maintained by the IT department just check if your server exists there if not add it yourself e Configure the environment variables Add the folder where you extracted the Instant Client to the path environment variable To be sure that you are using the correct tnsnames ora file create a new environment variable called TNS_ADMIN and put there the path where you have this file should be the instant client path e If it is a development machine please unzip the SDK to the instant client path and configure Visual Studio by adding lt instant client path gt sdk lib msvc to the libs folder list and lt instant client path gt sdk include to the include folders Caution Usually CERN machines come with Oracle Tools installed which comes with an older version of Oracle instant Client Please check if you have this installed in your machine
12. er ALICE DCS SPDTRG passwd pixel456 jam player executable C jp_25 VisualStudio JamPlayer25 Debug JamPlayer25 exe Table with the available categories and settings General category side Defines which side this FED server is handling A or C DebugMode Defines the debug mode of the FED debugMode true means no VME access so its running for testing purposes only DataBase category conString Connection string defines a Oracle database server Look at tnsnames ora file to find out about available connection strings User User name for the database connection Passwd Database password for the corresponding user Jam Player category Executable Path of the jam player executable 2 2 3 Configuring SPD FED as a service It is possible to install the SPD FED Server as a Windows Service using a wedge software called XYNTService which allows you to run almost any program as a Service on Windows NT 2000 XP or 2003 You can read more about XYNTService on http www codeproject com system xyntservice asp In order to do so you will need to download two files http www bitwiseim com download service XYNTService exe the executable http www bitwiseim com download service XYNTService ini configuration file copy these files to the same folder as the SPD FED server open the XYNTService ini and write the following in the file Settings ServiceName SPD_FEDServer ProcCoun
13. ettings with the values from the database HSCNF_PIXMTX_SET command to set the matrix settings HSCNF_PXDAC_ALL command to set all pixel dacs in one hs 15 HSCNF_PXDAC_CH command to set only one pixel dac in one hs HSCNF_PXDAC_DEFAULT command to set the pixel dacs with the defualt values HSCNF_READ_PXDAC command to read the one pixel dac for one all 10 pixel chips of one channel 4 2 Generic Configuration CNF Commands CNF_AUTO_CONF_ROUTER Auto configures the router Parameters options controlReg LOL1Time LrxL1FastorDelayO LrxL1FastorDelay1 LrxL1FastorDelay2 CNF_CHSTATUS_ALL command to refresh the status of all half staves Parameters array with 120 values CNF_CHSTATUS_CH command to refresh the status of one half stave Parameters 16 value 0 off 1 2 test CNF_MCMSTIMULI_OFF command to clear the mcm stimuli in one channel Parameters channelNumber columnToSet CNF_MCMSTIMULI_OFF_ALL command to clear the mcm stimuli in all enabled channels Parameters columnToSet CNF_MCMSTIMULI_ON command to set the mcm stimuli on in one channel Parameters channelNumber columnToSet CNF_MCMSTIMULI_ON_ALL command to set the mcm stimuli on in all enabled channels Parameters columnToSet CNF_PL_RT_ERRORS_START Starts pooling the router memory for errors CNF_PL_RT_ERRORS_STOP Stops pooling the router memory for errors CNF_PL_TEMPERATURE_OFF 17 command to stop the ooling of the temperature CNF_PL_
14. iCces ce een ann i RR EE 11 4 List OF FED 5 2555 ee 11 4 1 Half Stave configuration HSCNF Commands 11 4 2 Generic Configuration Commands s sscccccesssssssecccecsssesseeeeceesessnsceeeeeeesseseeeeeeeeees 16 4 3 Scan SCN COMMANA S oreiro ETENA Aa 18 4 4 Register Command Seetee nenen eee epe 4 4 1 ed nie EUREN E 4 3 2 Link Receiver amp e E 4 4 3 Router Registers oce eet eene Pee e A ee dede ied The SPD FED Server The SPD FED Front End Device Server is a stand alone application designed to be the driver layer of the system It interfaces with the SPD electronics and its capable of receiving commands and of publishing status information to several computers over the network It was developed in C to provide an interface to all hardware features and to be the first layer of control of the system Its main purpose is to configure the detector provide hardware debugging tools perform calibration procedures and to publish status information on the system ensuring the data quality There are two instances of the SPD FED servers used in the SPD DCS one for side A and one for side C each one of them being able to freely access the 32 bit VME address space
15. in the Hardware using a JTAG player embedded in the Router to configure the detector Command A Channel FSM SPD Off Detector 3 Electronics 1 FED Software 1 1 Libraries Used Supervision Layer Nodes E rJ gt lt 7 2 lt lt Ethemet The SPD FED server was developed on top of CERN standard libraries used in its communication layer and in the hardware access with the detector electronics DIM Developed at CERN stands for Distributed Information Management System It provides a network transparent inter process communication layer It is used by the SPD FED to publish status information and to receive commands from other computers through the network OCCI Oracle Call Interface OCCI is a high performance and comprehensive object oriented API to access the Oracle databases It is used by the FED to access the DCS configuration database VISA Drivers In the Driver layer it uses National Instruments VISA 3 Virtual Instrument System Architecture to interface with the hardware VISA is a standard which defines I O software specifications for VXI VME eXtensions for Instrumentation GPIB and serial interfaces Links Clara Gaspar DIM http dim web cern ch dim OCCI Oracle C Call Interface http www oracle com technology tech oci occi index html NI Visa User Manual http www ni com pdf manuals 321074b pdf 1 2 Development Environment The SPD FED server was devel
16. ne of the bunch crossing orbits write and read register with 2 bits with the follow format Clock phase fine delay 0 Clock phase fine delay 1 RT CONTROL Base address of the router control register this one is used every time RT DATA RESET RT DATA SELECT RT DDL STATUS DPM Base address of the dual port memory read only RT ERROR MANAGER RESET Error handler Global RESET for all FSMs and SPM ERROR MASK 25 Command to access the router error mask register RT_EV_LENGTH_OF_BLOCK RT_FIFO_ENDADDR RT_FIFO_STARTADDR RT_FLUSH_DPM RT_FO_COINCIDENCE_COUNTER RT_FO_FROMVME RT_FO_GLOBAL_COUNTER RT_FO_LINKRX_COUNTER RT_FO_NUMBER RT_FO_TIME_COUNTER RT_INTERLOCK_STATUS Read_interlock_Status_selected areg hf4 gt only read you received 7 bits with the following format Router_Interlock Interlock on HS_5 Interlock on HS_4 Interlock on HS_3 Interlock on HS 2 Interlock on HS 1 Interlock on HS 0 RT IROPUSHB RT JPLAYER RT JT EXEC START RT JT RDEN FIFOIN RT JT RDNUMB FIFOIN RT JT RDWR DATA RT JT RESET RT JT RESET FIFO RT JT RESET STMACHINE RT JT STATUS 26 RT_LO_COUNTER new michele register RT_LOID RT_L1ID RT_L2ID RT_LRX_MEM_BASEADDR Base address of the dual port memory in the link receiver Must be debugged never used and there are 6 memories per router 2 per Irx but the software only returns one we have a clear bug here RT_MEM_
17. o Router 0 6 to 11 corresponds to Router 1 etc spd feDimServerA DATA IN spd feDimServerC DATA IN Data In A variable length array containing the input data of the command The format of the data will depend of the type of command sent Command DIM Services Comment spd feDimServerA RET DATA spd feDimServerA RET DATA Data Out Variable length array with the resulting output data of the last command spd feDimServerA ERROR CODE spd feDimServerC ERROR CODE Error Code Integer value displaying the execution status of the last command 0 if executed successfully and with the corresponding error code if the execution failed spd feDimServerA ERRORS REPORT spd feDimServerC ERRORS REPORT Error Report A string displaying with a more meaningful information of the execution status of the last command ex HSCNF CONFIGURE DEF failed for channel 12 spd feDimServerA CMD NAME spd feDimServerC CMD NAME Command Name Return DIM service updated by the FED server after the execution of a command Returns back the received command name spd feDimServerA CH NUMBER Channel Number Return DIM service returning back the channel number received 10 spd_feDimServerC CH_NUMBER 3 2 Status Services Connecting the SPD hardware to the rest of the world the SPD FED server has to work also as one information hub of the system Data that are relevant to the overall stabili
18. oped using Microsoft Visual C NET It is a Visual Studio 2003 solution composed by 6 projects ALICE SPD DIMServer Top level project containing the DIM interface to PVSS This project parses all FED commands and contains references of all classes HSConfig Project dedicated to half stave configuration Contains higher level classes to manage half staves routers and calibration scans AddressGenerator Contains classes that return memory addresses of the Router Link Receivers and of the Busy card BitsManager Project dedicated to bitwise operations Contains a few utility classes that are passed through inheritance to other classes spdDbConfLib Project dedicated to manage the SPD database interface Contains classes to connect to the database to manage all data records with versioning VMEAcc Low level project to manage the VME BUS access Contains classes to manage the reading and writing of VME registers as well as VISA sessions Caution The development environment was not upgraded to Microsoft s Visual Studio 2005 or Visual Studio 2008 due to compatibility problems with ORACLE OCCI interface 1 3 Solution Dependencies Here is the diagram of the projects dependencies in the SPD FED server solution BitManager lib spdDbConfLib lib AddressGenerator lib VMEAcc lib Alice SPD DIMServer HSConfig lib 1 4 Library and DLL Versions Library Comment Version MSVCRTD DLL Microsoft Visual Studio 2003 run
19. t 1 Process0 replace the following items with the correct path to the SPD FED executable CommandLine D fed_server SPD FEDServer exe WorkingDir D fed_server PauseStart 1000 PauseEnd 5000 UserInterface Yes Restart No Open a command line go to the path where you copied the SPD FED and run the following command XYNTService i And that s it please check the windows services and see if you can see a service called SPD_FEDServer To uninstall the service or to restart because of any mistake use the following command XYNTService u 3 FED Server DIM interface 3 1 FED Commands The SPD FED server was designed to receive commands from several ALICE control subsystems So for the FED server a command structure was formulated to be flexible capable of receiving a variable number of arguments and to accurately display the status of the execution of all commands So each FED server has a command channel which is composed by 3 DIM commands and 5 DIM services Command DIM Commands Comment Spd_feDimServerA COMMAND_NAME Spd_feDimServerC COMMAND_NAME Command name A string identifying the command to be executed spd feDimServerA CHANNEL NUMBER spd feDimServerC CHANNEL NUMBER Channel number The channel number of the command to be executed this corresponds to the half stave number If the command is for a Router then channel number 0 to 5 corresponds t
20. ty of the system need to be constantly monitored and passed quickly to the PVSS supervision layer for monitoring purposes and Alarm generation So in addition of the data that can be retrieved trough commands both SPD FED servers publish a list of several parallel DIM Services displaying extra information of the system Status DIM Services Comment spd_feDimServerA TEMP_BUS lt 000 059 gt spd_feDimServerC TEMP_BUS lt 060 119 gt Temperature of the bus 120 DIM services one per half stave displaying the detector bus temperature measured by the Router spd_feDimServerA TEMP_MCM lt 000 059 gt spd_feDimServerC TEMP_MCM lt 060 119 gt Temperature of the bus 120 DIM services one per half stave displaying the detector MCM temperature measured by the Router spd_feDimServerA ROUTER_ERROR lt X lt 0 9 gt feDimServerC ROUTER lt 10 19 gt Router Error Status 20 DIM services one per Router displaying the number of errors detected by the Router FPGA in the system spd_feDimServerA LOG spd_feDimServerC LOG DIM Log Interface String DIM service publishing log information of each FED very useful for debugging purposes spd_feDimServerA DATA_STREAM spd_feDimServerC DATA_STREAM Data Stream DIM service that can publish the raw data stream of the detector enabling the use separate analysis tool without the need of the ALICE Data Acquisition Systems 4 List of
21. usy card control BSYCD_DRVREC BSYCD_INPUTS BSYCD_LOCOUNTER BSYCD_LODELAY BSYCD_RESET Busy card reset Definition file for commands associated with read write register commands BSYCD_VERSION busy card FPGA version register LRX_BUSY_CONTROL LRX_BUSY_MASK 4 3 2 Link Receiver Registers LRX_CLK_DELAY write only register its used to set the delay in the clock line for this channel 8 bits value LRX_CONTROL LRX_DATA_DELAY write only register its used to set the delay in the data line for this channel 8 bits value LRX_DATA_ENC_STATUSO LRX_DATA_ENC_STATUS1 LRX_DATA_ENC_STATUS2 LRX_DATA_ENC_STATUS3 23 LRX_DATA_ENC_STATUS4 LRX_DATA_ENC_STATUSS LRX_DATA_ENC_STATUS6 LRX_DATA_ENC_STATUS7 LRX_DPM LRX_DPM_ADDRESS_COUNTER LRX_EN_MOVEBIT LRX_ERROCOUNTER LRX_EV_DESCRAM_STATUS LRX_EV_END LRX_EV_START LRX_FIFO_EV_DATA_STATUS LRX_FIFO_PIX_DATA_STATUS LRX_FLUSH LRX_FORMAT_ERROR LRX_HISTOGRAM LRX_INPUT_ST_STATUSO LRX_INPUT_ST_STATUS1 LRX L1 MEM POINTER LRX L1 ROUT COUNT LRX LRX VERSION read only register with the version number of the firmware for this link receiver LRX MASK COLUMN LRX STIMULI 24 LRX END LRX MEM START LRX RESET LRX SHIFT SEL SOFT RESET LRX STATUS LRX TEMPERATURE LRX TEST REG 4 4 3 Router Registers RT ADDRESS MEM COUNTERS SELECTED new michele register RT BC LOCK Clock Fine Delay makes the router lock to o
Download Pdf Manuals
Related Search