User manual Secret cupboard English
Contents
1. User manual Secret cupboard English GENERAL The lock operates with a 6 digit code or word of 6 characters The lock has a possibility to add a second user code Each entry is confirmed by a beep and blink Signal A valid code is followed by a double signal an invalid code by a triple signal After an interval of more than 10 seconds the already entered part of the code is deleted and the entire sequence has to be re entered To open the lock Enter code i e 1 2 3 4 5 6 factory code turn the handle clockwise and open the lock within 3 seconds If the lock is not opened within 3 seconds it will be automatically locked again To close the lock Close the door and turn the handle counter clockwise The lock will close automatically Check if the lock is closed by turning the handle Safety advice Change the factory code as soon as possible Do not use any personal data e g birthdays as a code Keep the code from unauthorized access To change the code with open door 1 Enter 6x O double signal 2 Enter the current valid code double signal 3 Enter your new code double signal 4 Enter your new code again as confirmation double signal If mistakes are made while changing the code triple signal the old code remains valid Test the new code several times with an open door Add second user code 1 Enter the manager code and hold down the last digit until you hear two beeps 2 Press 1 double signal 3 Enter2. new user code twice 2x double signal When the second user code is not accepted 3x signal it means that the user code is too similar to the manager code Select a new code Disable second user code 1 Enter the manager code and hold down the last digit until you hear two beeps 2 Press 2 single signal 3 The second user code is now temporarily disabled Re enable second user code 1 Enter the manager code and hold down the last digit until you hear two beeps 2 Press 1 single signal 3 The second user code is now temporarily disabled Remove second user code 1 Enter the manager code and hold down the last digit until you hear two beeps 2 Press 3 single signal 3 The second user code is now permanently removed Wrong try penalty After four invalid codes the lock is automatically blocked for 5 minutes During this period the lock signals at 10 second intervals After the time penalty the entry of every second invalid code initiates a new 5 minute delay period Power supply battery change When the batteries are running low the lock will signal for about 3 seconds while being opened The batteries then have to be changed as soon as possible Use alkaline batteries only preferably from a good brand such as Duracell The battery compartment is at the bottom of the keypad or at the inside of the door Press the battery clip carefully at the battery SECRET Safes
Download Pdf Manuals
Related Search