82-13100 & 82-13105 User Manual
Contents
1. x to exit c Color adjustment can refer to the volume adjustment interface operation When there are many options in the option frame click left key to see down pull menu To click the left key on the playback interface can make gt gt means forward lt lt means raw gt gt I means Slow play I gt means frame play gt means Play A means exit 1 In the input frame click the left key can activate the keyboard The number symbol English can be input by clicking the mouse 2 Pinyin also can be input by the soft keyboard when enter Chinese the method is the same as remote control You can use the left right key to turn over the page when check on Pinyin Chinese word 3 When input number click the right key the number soft keyboard will bob up firstly and then use the left key to select the corresponding numerical value Also click the left key to exit the number keyboard 1 Press the left key to move the mouse can adjust the parameter on the volume color VGA border interface And the corresponding parameter will be display at the same time 2 In the Motion Detection setting interface you can use the left key to drag the frame to set the motion detection area 3 1 3 Menu Configuration You can control the DVR by a lot of menu operation This tree will show you the menu structure and it will be in details in the following chapters SYSTEM LANGUAGE VIDEO AUDIO MAIN MENU ADVANCE SETUP MAIN2. S2 FIDD IMNSLANAUON e e E EA 42 5 3 Wireless Gettmg Error Bookmark not defined Re E 44 Sm GF a ever al Device EE 44 Eh 45 1 INTRODUCTION 1 1 Feature The model 82 13100 and 82 13105 four and eight channel DVRs are capable of simultaneously recording at 30fps per channel These DVRs feature pentaplex operation simultaneous local recording playback remote network surveillance data backup and monitoring and facilitate easy parameter settings space saving motion detection recording I O alarm functionality PTZ connections and settings and a USB mouse 1 2 Product feature Advanced RTOS H 264 compression Software upgrade via USB USB mouse control PTZ and network function Multi language versions are selectable Support mobile surveillance Support network center management system G OOF Applied in large surveillance area such as supermarket gas station factory etc ENVIRONMENT ADAPTABILITY 2 1 Notice To safely operate the DVR and prolong its life please pay attention on following 1 When installing device please comply all the electric product safety criterion N Power and ground Do not touch the power and DVR with a wet hand Do not drop liquid on DVR Do not put others on DVR Please using soft dry cloth when clean DVR do not using chemical solvent e When the power line connects with jack even dont startup device There is still have voltage If you do not use d
3. 09 40 55 Double click one item of listed recording video the recording video will playback i DA MF A A DOMM D l Ah A OM GO lp meanwhile the file icon will change to B and will occur the below picture play buttons Pause stop HU rr slow NExTFRAmE 2e Toavl Is J The above purple progress bar shows download progress green progress bar shows 35 playback progress Pause Switch between pause play STOP Stop play FF Fast play SLOW Slow play NEXTFRAME Pause at next frame 264T0 Ant Convert H 264 file to H avi file click this button access into file convert setting interface as follow WW AviConvert SOURCEFILE DAMINI vehicle iL DESTINATIONFILE DAMINI vehicle record ERER avi SOURCE FILE Click to setup the H 264 file to convert DESTINATION FILE Click to setup the directory for saving avi file k Convert After setting clic file convert start the convert progress bar see below picture will see the progress of convert LRRSRRRRR 4 4 10 SETUP Click SETUP to enter into setup interface this interface include record alarm PTZ network setting and system information six menus 4 4 11 RECORD Click RECORD to enter into setup interface you can check the parameter settings as in GUI of DVR 4 4 12 ALARM SETTING Click ALARM to enter into setup interface you can check the parameter settings as in GUI of DVR 36
4. 38 5 1 2 The Definition of Bottoms and Connectors on Front Panel AUP DIGITAL VIDEO RECORDER DIGITAL _ 8 cut cre POWER T cH cs a gt GE LEFT RIGHT Qua m mew DOQQOQ e REC STO STOP PLAY FWD REW PAUSE direction key include up down V left ai Direction key right gt four buttons which can move cursor to setup and control PTZ Confirm operation or into PTZ control panel under live OK PTZ OK PTZ view Stop key Stop button Speed choice PP fast forward button Ed fast reverse button Control Pause key I pause key button Single image CH1 CH2 CH3 CH4 single image choice pe eee 39 5 1 3 The definition of buttons and connectors on rear panel Audio in Video out Video in mz ease sesssoeseo QOOOO een Power Audio out of Alarm in we B RS485 PTZ Control d VC Switch Internet Notebook PC Mobile surveillance eme en DE em cams nO en Iessen peme Iessen D D Alarm Output I O output for alarm RS485 RS 485 for connecting PTZ RS232 For connecting PC Power supply for DC relay and the current is 100MA 12V make sure short circuit can not happen For connecting Ethernet VGA output For connecting VGA monitor USB2 0 Copy video record via USB2 0 40 USB MOUSE Mouse operation equipment audio output For connection audio output Please check the fan function for diary maintained and Fan change new one if the fan h
5. 5 1M 10 30 00 10 30 41 2 5 1M 4 10 30 00 10 30 41 3 5 0M 10 30 00 10 30 41 4 4 9M 4 10 30 47 10 36 54 1 43 6M 4 10 30 47 10 36 54 2 43 6M 4 10 30 47 10 36 54 3 43 6M 4 10 30 47 10 36 54 4 43 2M BACKUP REPLAY v Ix Wating For data EE Click right up of calendar interface and 3 to setup the month for searching click refurbish at the calendar interface will display the recording information of current month 34 Sun Mon Tue Wed Thu Fri Sat i 2 3 4 5 6 7 8 9 iD ii 12 13 14 15 16 ER is 20 21 22 23 24 25 26 27 28 29 30 31 ALL CHANNEL ALL TYPE w i The highlighted date means that day have recording video RED FRAME means the date is system date click the date will search that days recording file list For example the above picture display 2008 Dec 3rd 4th 5th 6th 8th 9th 10th 11th 12th 17th 18th have recording video and system date is 18th Dec 2008 currently search date is 17th Dec At the below of calendar select channel and type click SEARCH the result will display as follow FILE LIST TIME 08 04 36 08 05 36 08 04 36 08 05 36 08 05 36 09 05 36 08 05 36 09 05 36 dQ 08 22 58 08 25 54 08 26 54 09 18 59 09 01 26 09 18 59 09 05 36 09 18 59 09 05 36 09 18 59 Q 09 19 33 09 26 52 d 09 19 39 09 26 52 Qos 19 40 09 20 41 d D r 20 41 09 26 52 Q 09 27 30 09 40 55 109 27 30 09 40 55 109 27 30 09 40 55 09 27 30
6. IP address into IE address column If not 80 port number should add behind IP E g when IP is 192 168 0 102 set port is 8088 http 192 168 0 102 8088 should input When the net is connected IE will automatically download the file to PC as following Web Application Manager Microsoft Internet Explorer Fie Edit View Favorites Tools Help sl E Le PS Search SPY Favorites ga ch dn PP S Address http 192 168 0 102 i To help protect your security Internet Explorer stopped this site from installing software on your computer Click here for options browser do not Se to download the ActiveX saan Wes click i ere The process will last for 1 2 minutes Please click If your browser does not support the ActiveX to download please click bere wen downloading not successful System will automatically enter GUI as follows 31 3 Web Application Manager Microsoft Interne Explore ox file Edt yew Favortes Tods biep r Qa 2 e psec Sy Favorites 8 4 4 8 DEET http 192 168 3 97 sw E o m amp USER LOGIN Chinese English selectable PASSWORD Administrator has all authorities operator has limited authorities who they can only watch playback please change the unit No and default password in time for system security NETWORK LAN WAN according to the net type of your computer and DVR Click Login to enter IE interface If input is wrong click Reset to delete and
7. REC SIZE 30Ming Ei Lai DEFAULT APPLY EXIT CHANNEL ON Means the channel enable for recording RESOLUTION There are HIGHEST HIGH NORMAL three options HIGHEST means the resolution best corresponding to D1 HD1 CIF resolution QUALITY There are BEST FINE and NORMAL three option They are corresponding HIGHEST HIGH and NORMAL data stream standard AUDIO ON Means enable the audio recording for all channels OFF Means disable audio recording REC MODE POWER UP Means recording start when DVR to work TIME Recording as the schedule When chose Time recording Recording period setting will show up in the right Move cursor to there and press Enter to the interface as below SCHEDULE CHANNEL ALL B ALARM GENERAL NO RECORD COPY SUN to ALL COPY DEFAULT SAVE CHANNEL You can select all channel or just one channel DAILY There are ALARM NORMAL NO REC three modes if set for detail time please setin Recording period setting and then press Enter Impress color means no recording during this time Different color means different recording mode Red means alarm recording green means normal recording blue means no recording RECORD SIZE Press Enter or to choose the record size time There are 15min 30min 45min 60min four options that means it will pack as the mode you selected 4 Hard Disk Management Move the cursor to HDD Icon highlighted when selected press
8. are None Odd Even Mark Space to select the default setting is none ADDRESS Fill the code of respective PTZ with relative channel 24 PTZ SETUP CHANNEL CH CH2 CH3 CH4 PROTOCOL Pelco D I Pelco DM FPelco DM Pelco D I BAUD RATE 9600 B 9600 B 32600 M 2600 B DATA BIT g L z 8 Mm amp CH STOP BIT 1 1 1 VERIFY oD B H oD M ODD M ADDRESS 001 001 001 001 DEFAULT APPLY 18 NETWORK SETUP Move the cursor to NETWORK SETUP icon highlighted when selected and press Enter to enter into setting interface picture is below NETWORE SETUP TYPE DHCP Ka MEDIA PORT 09000 WEB PORT oo0080 DNS 202 096 134 133 DDNS SETTINGS DEFAULT APPLY CONNECT NETWORK TYPE There are PPPOE DHCP amp Static three options 1 Static Select Static in the CONNECT NETWORK TYPE and press Enter to enter into the interface as followings NETWORE SETUP TYPE STATIC M MEDIA PORT 09000 WEB PORT 00080 IP ADDRESS 192 168 015 141 NETMASE 255 255 255 000 GATEWAY 192 168 015 001 DNS 202 096 134 133 DONS SETTINGS DEFAULT APPLY MEDIA PORT transfers video data between client and device WEB PORT setup the port of IE browser via HTTP 25 IP ADDRESS setup the IP address and press Enter or input numbers to fill IP address NETMASK press Enter or input numbers to fill netmask GATEWAY press Enter or input numbers to fill default gateway 2DHCP Select the DH
9. channel takes about 14Mbyte for audio recording lt HDD space cost is related with Best Good Middle in Record mode gt Bit rate and the video size of the period If the video is still HDD cost will be small if the video is moving HDD cost will be large Best will take 320Mbyte of each channel per hour Good 50 100Mbyte of each channel per hour when video is still or few moving 100 200 M byte of each channel per hour when video has big moving or much moving Middle 50 100Mbyte of each channel per hour when video is still or few moving 100 150 M byte of each channel per hour when video has big moving or much moving Question Why it can t do motion detection Answer lt The setting of the area of motion detection is not correct lt Low sensitivity Question CD writer USB backup error Answer lt The data exceeds the capacity of backup device lt The backup device is incompatible lt The backup device is damaged Question Why I O alarm does not work Answer lt The alarm setting is not correct lt The alarm line connection is not correct lt The alarm input signal is not correct lt An alarm device connect two loop access at the same time Question Why remote control can t work Answer 48 lt The address of remote control is not correct lt The distance of remote control is too far or the angle is too biased lt Remote control batteries run out lt Remote control is damaged
10. ee forest Ta Wm 4 4 13 PTZ Click PTZ to enter into setup interface you can check the parameter settings as in GUI of DVR plicat Micr Web App ion Manager icrosoft Internet Explore gt IO d Edt Ven Fevortes Tods tiep a oe OD BG Pao trom O 2D a p Address d hetp 192 168 3 97 zk lt W I Done 4 4 14 NETWORK Click NETWORK to enter into setup interface you can check the parameter settings as in GUI of DVR n Manaper icrosoft Internet Explore Bie gdt Yew Favortes Tods Heb z Om O DAG Ama rm BS Bi Address L I heto s 192 168 3 971 25 255 255 0 37 4 4 15 System setting Click SETUP to enter the system setting interface as follows Gell 8 http 1192 168 3 97 Done remet BANDWIDTH Set the amount of bandwidth in kbps 128k 192k 256k 384k 512k 1024k that you want to allocate for traffic that matches internet this bandwidth depends on the place normally around 256 or 384 kbps FILE SAVE PATH capture picture and recording video save path IE login password and DST settings you can check as DVR setting 4 4 16 HOST INFO Click HOST INFO to enter into system information interface see below picture this interface shows HDD status remain record time firmware version MAC Address and all the information is fixed A Web Application Manager Microsoft Internet Explore file gdt Yew Favertes Jods ek
11. or the front panel of dvr is damaged 17 Question Why WEB can t log Answer lt Please check the network whether it s connected And check if the panel LINK or 100M LED display normally use ping xxx xxx xxx xxx DVR IP to check if the internet is well linked lt Recommended Windows XP or Vista operating system using IE6 0 browser or IE7 0 browser lt ActiveX control is been blocked Please manual install ActiveX control lt Please install DX8 1 and upgrade your video card driver 18 Question There is no picture or not clear when you preview the recording or playback the recording by IE Answer lt If you visit DVR by IE please choose Wan in web environment lt Please try to Close windows by the right mouse button and try to Open windows 19 Question Why it displays other members are setting While setting DVR by IE Answer lt Please check the DVR configuration interface is in the state of open Please exit DVR 49
12. vcesencccsscccacecsdencdvescecacecsdencivesdecdeccdecedvesdaicdecccededeesdaecdac 5 AGG erte 5 3 Device operation manual 6 S REMIS KEVINS il 61 le eege 6 En a FW VET OU CONTO acne tiie cia eae eee ca cient ini aecadaain 6 See e Te EE 7 See 9 Bee OV SISM OG e DE 10 SE ERT 10 9 22220 STEM LOGIN rrii E eee 10 2 3 2GUIOPERATION 11 SE Eeer 31 FEATURE EE Error Bookmark not defined AZ de ee eet Tele WE 31 Ao SENON EE 31 AOP ERA TIONINTERFA CE irren oE 32 PATEN E e ee 32 442 PTZCONTRO E 33 AAS ZOOM EN 33 Se Le 33 RI ER EE RE PRESE ose n TATATA TRTE 33 PE PEN EE 33 AAL OTHER OPERATION sscesoscncnnen 34 E NA Va ape ee ne eee ree te tea areca ee ae ttre ceepe re nace a crane eenceeeaatr mate eeeaetremte nace 34 1A TOS RE 36 44 TREGOR E eos E EEE E ne ee eee 36 TEE etl NC EE 36 ze al eal EE 3 E EK EEN 3 4415 SYSISM SEMINO EE 38 AAAGC THOS INI E 38 5 DVR Installation Gudelme ceeeceeeeeeeeeeeeeeeeeees Error Bookmark not defined 5 1 Product CUve rvlew E Error Bookmark not defined D121 Product PAOOieteteleieieivlelvbetetelvivivtetebetebedetvivbetele ites Error Bookmark not defined 5 1 2 The Definition of Bottoms and Connectors on Front Hanel 39 5 1 3 The definition of buttons and connectors on rear panel ceeeeeeeeeeeeeeeeeeeeeees 40 S E Eelere ee d EE 41 5 15 Alarm Input and OUMU as 41 5 1 6 System Network Diagram ccccccccsssseseccceeeeeseeeseeceeeeeseeeeeeeeeeeeeesssueeeeeeeeeeeeesaaas 42
13. 3 If let RECORD TIME available in BASIC SETUP it will show the date time when playback record file If RECORD TIME available it will not show the time 4 When playback press SLOW to let the playback slow press FORWARD REVERSE to speed reverse play press PAUSE STEP to pause or playback frame by frame Press Exit to exit from playback and return to the Previous menu 5 When selected recording file playback finished it will continue following files if no followed record file it will return to File Detail List automatically 2 BACKUP Via USB Storage to backup connect USB device via USB2 0 port before backup Select the recording file by direction keys and press Enter There will a V sign if select is ok and then press BACKUP to begin backup as follow WARNING Processing t 50 Upgrading don t pull out thumb drive Instruction 1 When USB device space is less than recording file the system will show Space no enough 2 Disconnect USB device directly when backup finished 3 RECORD MODE Move the cursor to RECORD Icon highlighted when selected Land press Enter to enter into the setting interface As follow showed use direction keys and cursor to change the options RECORD CHANNEL CHi ON McH2 ON MCcCH3 ON MicH4 ON M RESOLUTION HIGHEST HIGH NORMAL QUALITY BEST OO FINE NORMAL AUDIO ENABLE DISABLE REC MODE POWER UPR SCHEDULE
14. ATION The main menu include SEARCH RECORD HDD BASIC ADVANCE and Exit MAIN MENU SEARCH RECORD Ke ADVANCE Remark You must press APPLY to make the setting for submenu valid It will be no use when exit directly There is a special feature of this DVR when you move the mouse somewhere the explanation information will be showed automatically 1 RECORD SEARCH Move the cursor to RECORD SEARCH Icon highlighted when selected press Enter to enter into the setting interface There are three methods of searching record Method 1 playback by date Date input You can adjust the checking date and time press Enter or input the number directly to adjust the year month date And then input time in the next box click play and then you can see the recording video Method 2 playback by recording status Input the date click search and you can see the recording status on this date RECORD SEARCH DATE 2008 12 1 SEARCH 09 35 PLAY RECOR STATE FEB 01020304 05 06 0708 09 101112131415 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 26Th 00 02 03 04 05 06 07 10 1 13 14 15 16 18 19 21 22 23 FILE LIST LOG SEARCH EXIT Instruction 1 MONTH It will show all the recording status in this month Green means normal recording Red means alarm recording and the default color means no video Click any date in this frame can search the recording status of tha
15. CP and enter into the interface as followings NETWORK SETUP TYPE DHCP K MEDIA PORT 09000 WEB FORT 00080 DNS 202 096 134 133 DDNS SETTINGS DEFAULT APPLY MEDIA PORT same as static setup WEB PORT same as static setup NOTE restart system when select DHCP and it will automatically connect with DHCP server Will allot IP address when connect ok and the address will showed on the interface 3 PPPoE Select the PPPOE and enter the interface as followings NETWORK SETUP TYPE PPPOE M MEDIA PORT 09000 WEB PORT 00080 PPPOC NAME PASSWORD DNS 202 096 134 133 DDNS SETTINGS DEFAULT APPLY MEDIA PORT Port for private protocol of DVR and PC default 9000 If this port of computer is applied by other server please change to other free port 26 WEB PORT Http port Default 80 If admin change WEB port to e g 8088 port No should be added behind IP http 192 168 15 145 8088 should input into IP of IE IP address Fill in IP address according to the net of DVR Net mask Fill in net mask according to the net of DVR Gateway According to the net of DVR set gateway If no router of the net please distribute IP address of same web segment corresponding gateway should set 19 Application of DDNS You should register a host name user name and password from DDNS manufacture now we take dyndns for instance to show you how to register Please type in the IE address as follow http members dynd
16. EFENDE SECURITY JD R 82 13100 amp 82 13105 User Manual Please read before installing and using this product Damages caused by non compliance with this operating manual will void the warranty We will not assume any liability for damages to items or persons caused by improper handling or non compliance with the safety notices Any warranty claim will be null and void in such cases 1 Do not drop puncture or disassemble the camera or receiver otherwise the warranty will be voided 2 Avoid all contact with water and dry hands before using 3 Never tug on the power cords Use the plug to unplug it from the wall outlet 4 Do not expose the DVR to high temperature or leave it in direct sunlight Doing so may damage the DVR or cause DVR temporary malfunction 5 Use the devices with care Avoid pressing hard on the DVR body 6 For your own safety avoid using the DVR or power off the DVR when there is a storm or lightning 7 Remove the power adapter during long periods between usages 8 Use only the accessories and power adapters supplied by the manufacturer 9 To meet the regulations pertaining to parental responsibility keep the devices out of the reach of infants 10 Check power cables do not get crushed or damaged by sharp edges whenever the devices are in operation Products with CE Marking comply with EMC Directive 2004 108 EC Low Voltage Directive 73 23 EEC R amp TTE 1999 5 EC issued by the Co
17. Enter to enter into the setting interface and you can use direction keys and cursor to change the options HDD MANAGEMENT HDD STATUS OK SIZE FREE SPACE Bt AVAILABLE TIME 13Hour OVERWRITE ENABLE N HDD FORMAT USB FORMAT E a DEFAULT APPLY HDD STATUS There are three status available normal un format No HDD If HDD can not run normally including unformed and no HDD thereisa H display on video preview interface OVERWRITE ENABLE means when HDD space is less than 4G it will delete earliest recording file deleting can stop until the space is no less than 10G DISABLE means when HDD space is less than 500M it will stop recording and an prompt will display olease shutdown and replace HDD FORMAT Move cursor to select device and press APLLY to format FORMAT Flash Disk Move cursor there to select device and press APLLY to format Note DVR system will restart after HDD formatted but no restart for U Flash disk format 5 BASIC SETUP Move cursor to select BASIC SETUP The big icon means select ok and press ENTER to enter into the system language setup interface BASIC SETUP v LANGUAGE La DISPLAY VIDEO AUDIO Basic setup includes language date time password display and video audio and exit six options 6 SYSTEM LANGUAGE SETUP Move cursor to select system language The big icon means select ok and press ENTER to enter into the system language setup interface S
18. M there is a remark in live view No enough space please change HDD after shutdown 20 VIDEO LOSS turn on when one channel has no video input it will display video loss in live view ALARM MANAGE There are alarm output buzzer and post REC OUTPUT when an alarm triggered the alarm output time will be 0 second 10 seconds 20 seconds 40 seconds or 60 seconds BUZZER buzzer calling time setup when alarm triggered 0 second 10 seconds 20 seconds 40 seconds or 60 seconds POST REC post recording time setup 30 seconds 1 minute 2 minutes or 5 minutes 13 SYSTEM INFO Move the cursor to SYSTEM INFO frame is red when selected press Enter to enter into system info interface on this interface mainly display system hardware features and firmware version include software version MAC address serial number Picture is below SYSTEM INFO SOFT VERSOON TO11902 MAC ADDRESS 00 11 22 33 44 655 SERIAL NO 1234567890 14 MOTION DETECT Move the cursor to MOTION DETECT Icon highlighted when selected press Enter to enter into motion detect setting interface Picture is below 21 MOTION DETECT MD CHANNEL CHI CH2 CH3 Ch4 STATUS on B OFF D OFF D OFF D SENSITIVITY 4 B 3 B CH 2 KM MD AREA SETUP SETUP SETUP SETUP DEFAULT APPLY CHANNEL SWITCH Each channel has corresponding channel switch press Enter to turn on or turn off the motion detection for each channel SENSITIVITY each channel has c
19. SWORD oe ae a ef RE ENTER ek eo oa ADMIN PASSWORD 244 RE ENIER EFFERRE APPLI DEVICE ID Press or number key to setup the ID PASSWORD Enter key to choose whether password enable or disable enable means user need insert password when log in disable means without password and user can enter into main menu directly USER PASSWORD Press number key to setup ADMIN PASSWORD Press or number key to setup 9 DISPLAY SETUP Move the cursor to BASIC SETUP Icon highlighted when selected press Enter to enter into the setting interface DISPLAY SETUP NAME POSITION COLOR CH1 CH1 TOPLEFT SETUP CH2 CH2 TOPLEFTH SETUP HE CH3 TOPLEFT Ka SETUP CH4 CH4 TOPLEFT SETUP PREVIEW TIME ON M RECORD TIME DEFAULT APPLY NAME press Enter to enter into the setting interface 18 POSITION press Enter to switch name location there are 5 options bottom left top left bottom right top right and OFF COLOR press Enter to enter into setting interface as following COLOR SETUP CHROMTICITY LUMINOSITY CONTRAST SATURATION DEFAULT APPLY Press Enter or directly drag the cursor to set colors including chromaticity luminosity contrast and saturation press APPLY to save the parameters PREVIEW ON Means the channel is allowed to view the live mode PREVIEW TIME ON Means displaying system date and time above video RECORD TIME ON Means clock will display in the playb
20. TAIN 3 2 System Operation 3 2 1 START UP Connect the power adapter to DVR When start up the DVR POWER LED will be on and 4 images will be display on the screen If it has setup ignition recording or time recording the system will record automatically and the corresponding LED will be on and the system work normally Remark 1 If there is no HDD in device or the device didn t read the HDD or the HDD didn t be formatted it will display an H in the video preview interface 2 You must format the HDD in the DVR before first using The steps as follows menu gt HDD management gt format After formatting the system will restart 3 2 2 SYSTEM LOGIN Remark default device ID is 00000 and there is no password In order to keep safe please modify the user password and change the device ID in the base setup You can setup user and admin password Admin has all authorities while user has limited authorities of viewing image searching and play backing video When you input a password the system will automatically match and offer different password with different authorities When DVR started click right key by mouse If you open a password it will enter into user login interface The picture is as follows USER LOGIN DEVICE ID 000000 000010 PSAAWORD APPLY Ddvice ID You just need to enter the device ID as the right frame Password enter the admin password or user password 10 3 2 3GUI OPER
21. YSTEM LANGUAGE SYSTEM LANGUAGE x OSC Ke ENGLISH APPLY There are Chinese and English options press ENTER or to chose Remark System will restart after changing language success 7 DATA TIME SETUP Move cursor to select date time The big icon means select ok and press ENTER to enter into the date time setup interface TIME SETUP DATE 2008 12 11 DATE FORMAT ve Mupp P TIME 09 38 07 TIME FORMAT 24HOURS RB MODIFY DATE AND TIME DST OR DST MODE CUSTOM B START FIME AM 2 00 1ST WEEK SUNDAY JAN M ENG TIME PM 2 00 1ST VEER SUNDAY JAN M DEFAULT APPLY EXIT DATE Press Enter or or press number key to chose the date DATE FORMAT Press ENTER to switch between the date patterns there are YY MM DD and MM DD YY two options When chose the date format left date will be displayed with corresponding format TIME Press Enter or or press number key to choose the date TIME FORMAT Press ENTER to switch between the date patterns there are 12 HOURS and 24 HOURS two options Left time will be displayed with corresponding format Remark Have to move the cursor to the MODIFY TIME AND DATE and press APPLY to save it otherwise it won t save the modify if you exit this interface 17 8 SECURITY Move the cursor to SECURITY Icon highlighted when selected press Enter to enter into the setting interface SECURITY DEVICE ID 000010 PASSWORD ENABLE M USER PAS
22. ack of current file 10 VIDEO AUDIO SETUP Move the cursor to VIDEO AUDIO SETUP Icon highlighted when selected press Enter to enter into setting interface VID AUD SETUP VGA RESOLUTION 1024x7684 CAMARA SYSTEM PAL P VOLUME SETUP APPLY 11 ADVANCE SETUP Move the cursor to ADVANCE SETUP Icon highlighted when selected press 19 Enter to enter into setting interface Picture is below ADVANCED SETUP NETWORK EXIT a aa Advanced Function include Alarm settings system information Motion detection mobile phone monitoring system maintenance PTZ and network setting 12 ALARM SETUP Move the cursor to ALARM SETUP Icon highlighted when selected press Enter to enter into setting interface Picture is below ALARM SETUP op CHANNEL CH CH2 CH3 CH4 1 0 ALARM opt wo B opp wo BR HDD LOSS A HDD SPACE OFF M WIDEO LOSS OFF B ALARM MANAGE OUTPUT 105 M BUZZER 05 M POST REC 1MINMJ EMAIL SETUP i DEFAULT APPLY O ALARM Each channel corresponds an I O status that is when an alarm triggered it will activate the corresponding channel to start alarm recording N O indicate alarm is always OFF it will be ON when have alarm N C indicate alarm is always ON it will be OFF when have alarm HDD LOSS turn on means it will trigger an alarm if there is no HDD and it will display an H On the bottom left of channel 1 in the live view HDD SPACE turn on If the space is less than 500
23. as some problems 5 1 4 Connectors for Alarm Peel off the color skin of the cable and then insert the cable into the slot on the rear Alarm ing Alarm in Alarm in6 Alarm ing Alarm ina Alarm ina Alarm inZ Alarm int GAD 12V 24V output for alarm Alarm out GAD RS465A ULT ES232TX ES232EX GAD 12v output 5 1 5 Alarm Input and Output panel DVR There are 8 sets alarm input connector and 1 set output for this DVR Alarm input is for connection IR annunciation fog sensor The connection diagram of DC alarm inout as following Be ki 5 ch 41 Connection diagram of AC alarm input as following AC Load The connection diagram of alarm output as following 12V NO DVR I O output 220V AC AV IO 5 1 6 System Network Diagram Power Alarm in RS485 PTZ Control 5 2 HDD Installation DN Audio in V Audio out ke Ki Switch Notebook PC Please installation the HDD as the following steps 1 Uninstall the DVR and then you will see one HDD plate as following 42 Mobile surveillance 2 Connect HDD line as follows Hu wu mepu es Hun Augen 3 Install the HDD on HDD plate as the following photo indicate and then screws around Notice Newly installed HDD should format before recording 43 6 Dev
24. ch channel have normal recording video symbol R click icon to switch between signal screen quad EA EE split jiii l d i Volume adjust button 33 4 4 8 OTHER OPERATION 1 Select one channel at preview screen the selected channel s frame will be change to RED double click left key enter to the selected channel single screen display 2 Click one Chanel via left key at preview screen then click right key will occur window shortcut Menu see below picture You can open shut down and start this channel s record via shortcut menu 3 Click right key at one live view screen click open all windows or close all windows will quickly open close all windows 4 4 9 REPALY Click REPLAY to enter into playback interface File Edit View Favorites Tools Help Q sxx Q EN E Le ES Search Sie Favori es g B d s 3 Address http 119 137 112 167 yr z Search web A Upgrade your Toolbar Now G3 Mail Help Sun Mon Tue Wed Thu Fri Sat 1 2 3 4 56789 10 11 12 13 14 15 16 17 FR io 20 21 22 23 24 25 26 27 28 29 30 x CHANNEL SIZE a 409 00 00 09 29 59 3 210 2M 409 00 00 09 29 59 4 207 8M 409 30 00 09 59 59 1 211 5M d P09 30 00 09 59 59 2 210 8M 409 30 00 09 59 59 3 210 1M H09 30 00 09 59 59 4 207 6M G3 10 00 00 10 29 59 1 210 8M 410 00 00 10 29 59 2 210 3M C3 10 00 00 10 29 59_ 3 209 3M 410 00 00 10 29 59 4 208 1M 10 30 00 10 30 40 1
25. eck whether the video source and display device aspect of the problem 45 lt Check the brightness of the picture is 0 and bring it back to its original default setting lt No video input signal or too weak lt Display settings in the preview set to be closed lt The hardware of DVR is fault Question Why the DVR can t record after startup and the interface shows H Answer lt Check the DVR whether it use by DC 19V power adaptor lt Check the HDD whether it is formatted in DVR lt Check the HDD power line and the data line whether they are well connected or badly The HDD has problem The SATA port has problem Question What is meaning by R M H showed in interface Answer lt R means the channel is recording M means the channel is being motion detection lt l means the channel is being alarm H means there is no HDD the HDD is bad or the space of HDD is full Question Why DVR has the problem of real time image such as video image color serious bright distortion Answer lt BNC output selectable PAL and NTSC is not correct the image will be black and white lt DVR does not match with monitor lt The video transmission distance is too far lt The setting of dvr color brightness and so on are wrong Question Why there is no voice when monitoring 46 10 11 Answer lt Check if it is using positive sound box or speaker users can have short circ
26. erwise you need to ask your network administrator for 8 AMD PCNET Family PCI Ethernet Adapter the appropriate IP settings Obtain an IP address automatically This connection uses the following items Use the following IP address Bert for Microsoft Networks IP address 192 168 0 103 A File and Printer Sharing for Microsoft Networks Soos Packat Scheduler Subnet mask 255 255 255 0 Internet Protocol TCP IP Default gateway 192 168 0 1 ninstall Properties Obtain DNS server address automatically Description Use the following DNS server addresses Transmission Control Protocol Internet Protocol The default Preferred DNS server 202 128 168 wide area network protocol that provides communication across diverse interconnected networks Alternate DNS server 202 134 133 C Show icon in notification area when connected 6 Operate normal data via computer This can check if above setting is correct 7 Input IP address to check if it can visit DVR 8 Add DVR s port transfer function Add DVR s media port and WEB port 29 9 Use internet remote PC Check if DDNS is successful via ping xxx xxx xxx DVR s domain name 10 Inout DDNS into IE address if the WEB port is not 80 port number should add Please refer to IE operation chapter 11 After downloading IE active tool successfully login the interface default i
27. evice for long time please take the power line away from jack 5 3 Humidity requirement Please install the device in good conditions it s better to avoid from humidity drip sites etc 3 Device operation In device operation the enter key on remote control has the same function with mouse left click 3 1 Remote key instruction 3 1 1 Remote control Handheld IR Controller Key Functions 0 9 keys During setup number keys are used to input values For viewing channels 1 2 3 and 4 use 1 2 3 and 4 on numeric keypad respectively I keys During setup plus and minus are used to select next or previous values AY Up Down directional keys Move selection up and down e o in setup menu lt gt Left Right directional keys Move cursors left or right in setup menu QUAD Switch 4 Channels FWD Fast forward the video while playback press PLAY to return to normal speed REV Reverse the video while playback press REW to switch press PLAY to return to normal speed POWER ON Reset the MDVR to Power on and Power off mode standby and start Up LOGIN LOCK If the security is enabled in the setup use LOGIN LOCK key to enter the user setup It is important to remember the password due to without restoration function Log in to enter into User ID select and Password input interface and lock functions To exit setup and operation OSD Press OSD fo
28. ice Part 6 1 Check Device part 1 Digital Video Recorder 1 SET 2 Standard Part User Manual Power Cord Power Adaptor User Manual USB Mouse Remote Controller Cross Screwdriver Guarantee certification 3 Optional Part Antennas Extended power cable Harddisk 44 7 FAQ If your problem is not in below call our hotline and we will resolve any issues or problems you may have 1 Question Why DVR can t work after starting it Answer lt Check the adaptor input lt Check the on off power line does it well connected lt Check the on off power lt Check the upgrade procedure whether it s wrong lt V Check the main board of DVR whether it s ok 2 Question Why DVR will automatic reboot or stop after starting DVR several minutes Answer Instability or low input voltage Bad track hard drive or the line of hard drive is bad On off power supply is not enough The front end video signal instability High temperature too much dust too bad the DVR operating environment 4 The main board is not well connected with other board lt The hardware of DVR is fault 3 Question Why there is no output of single channel multi channel or all channel video Answer lt Please check the adaptor of camera whether it is well connected lt Please check the connect line for connecting video input and video output in the back board of DVR lt Please directly insert the video source into the display device and ch
29. m that to which the receiver is connected Consult the dealer or an experienced radio television technician for additional suggestions You are cautioned that any change or modifications to the equipment not expressly approved by the party responsible for compliance could void Your authority to operate such equipment Disposal If the devices system no longer functions or can no longer be repaired it must be disposed of according to the valid statutory regulations Disposal of spent batteries accumulators You are required by law Battery Ordinance to return all spent batteries and accumulators Disposing of Le p spent batteries accumulators with common household waste is prohibited Batteries accumulators that contain Ki X hazardous substances are marked with the symbols on the side These symbols indicate that it is prohibited to 4 dispose of these batteries accumulators in the household waste The abbreviations for the respective heavy metals are Cd cadmium Hg mercury Pb lead You can return spent batteries and accumulators that can no longer be charged to the designated collection points in your community outlets or wherever batteries or accumulators are sold Following these instructions will allow you to fulfill the legal requirements and contribute to the protection of our environment CONTENTS TIN FRODUG TION rsenesanenatnnntenamenenataneneaenaed Pat EEEE EEEE ieee et EOE 5 de Ee 5 2 Gelle ie 5 Ee En E 5 2 ENVIRONMENT ADAP TEE
30. mmission of the European Community Compliance with these directives implies conformity to the following European Norms EMC EN 301 489 LVD EN 60065 Radio EN 300 328 FCC Compliance Statement This device Elon complies with Part 15 of the FCC Rules amp Operation is subjected to the following two Le 5 conditions 1 this device may not cause harmful 3 interference and 2 this device must accept any interference received including interference that may cause undesired operation FCC CE WARNING This equipment has been tested and found to comply with limits for a Class B digital device pursuant to Part 15 of the FCC rules and ETSI EN 300328 These limits are designed to provide reasonable protection against harmful inter ference in residential installations This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause interference to radio or television equipment reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Move the equipment away from the receiver Plug the equipment into an outlet on a circuit different fro
31. ns org to register a new user C DynDNS an vi ei eg E E Sa Create your DynDNS com account Create Account Press releases 1 Fill out all the information then submit 2 Minutes later you will get a mail from dyndns which include the primary password for the user you just register 3 Then please login http members dyndns org with the new user and password click domain name management to enter into the operating interface then select new under the Dynamic DDNS 4 Create a domain name you need then press to apply now you have registered a host name Success 2 20 DVR group network 10 This chapter mainly narrates some networks setting method for your reference Applied ADSL only one DVR need to connect with Internet Make sure the DVR has successfully connected to ADSL modem the LED is flashing means SUCCESS Network type PPPoE Input media port and web port Please refer to Setup instruction network setup Type in the PPPoE user name and password Fillin DNS IP euch as 202 96 128 166 or 10 95 0 3 Users can refer to local computer DNS setup in DOS input ipconfig all in DOS to query RETO Since the public IP will change after restart please use DDNS function and mapping the public IP to a fixed domain name Save and restart device it will connect to internet via PPPoE mode automatically if
32. orresponding sensitivity setting including four standards high relative high medium and low press Enter key to switch MD AREA each channel has corresponding regional motion detecting setting move the cursor to corresponding setting press Enter to enter regional setting interface red area means it have activated motion detection transparent block means it have not activated motion detection Picture is below Move the direction key on remote control or make cursor move to the need designed area green frame means the cursor has moved to this pane press Enter to select or cancel motion detection of this small pane when setup finished press exit to back to MD setup interface it will save automatically Remark IR Operation press Menu key to select or cancel full screen Mouse operation click left and drag the frame to setup the region for motion detection 22 15 Mobile Surveillance Move the cursor to MOBLE Icon highlighted when selected press Enter to enter into setting interface Picture is below MOBILE CHANNEL cHi WOBILE NETWORK 3 Gi DEFAULT APPLY NETWORK CHANNEL select the channel for network transfer and press Enter to switch different channels WIRELESS NETWORK Select different mobile network from the options of 3G 2 5G and 2 5G and press Enter to switch different network NOTE Detail setting up please refer to appurtenance 16 SYSTEM PROJECT Move the cu
33. r main menu PTZ PTZ control press this key to enter into PTZ control interface when at single live view EXIT Exit to the preview or return to the last menu RECORD Start manual record STOP Stop manual record ASISTANT For future use 3 1 2 Mouse Operation You can use mouse to make operation of the menu besides IR remote controller The operation is the same as PC Windows Please inserts the mouse into USB Port Click Enter into main menu Click the right key on the live view right key Click left Click the left key to enter into the setting interface ke i Click the left key to zoom in the window on the live view and playback video Double click the left key can exit to the live view and playback multi window interface Click left key Volume adjustment color adjustment PTZ setting and VGA border operation It is for setting the single channel for volume adjustment PTZ control and color adjustment If it is multi window please use the left key to select the single window 2 The remark when click the left key for volume adjustment color adjustment VGA border is as follow a There are E and D for buttons the PTZ setting to adjust parameter click it can adjust the setting for PTZ b There is a sticker to show the volume on the volume adjustment interface Move the mouse to the corresponding position and click the left key The right side of sticker will show the volume click
34. rein put 4 4 OPERATION INTERFACE There are Live view Playback and Setup options in the main interface please press them to access it 4 4 1 LIVE Click to enter into the interface as followings A Web Application Manager Microsoft Internet Explorer File Edit View Favorites Tools Help Q sxx Ret LG x a Lei IS Search Je Favorites amp B d n Ki Address http 119 137 112 167 Kai H Search web A Upgrade your Toolbar Now GJ Mail Help PTZ CONTROL zom mcus ei ms PAN amp TILE POS SETTING HANSFE CLEAR pa PLAY CONTAL ES ES 4 ll ER 4 4 2 PTZ CONTROL Change the focus preset aperture to control the PTZ A t i D O Click 5 to up down left right control movement of the PTZ When hold on the one direction key the PTZ will keep circling as that direction after user press the stop key in the center of the wheel 4 4 3 ZOOM Click COUM to zoom in and out 4 4 4 Focus Click ECUS W to focus 4 4 5 Iris Click m 4 4 6 PTZ PRESET to change the size of aperture PAN amp TILE POS L Setup preset point You can control it via the below three buttons 4 4 7 PLAY Move cursor to the icons it will highlighted when selected Open all video Ze Capture picture save in local disk system save default route is C DVR gt Quickly start all channels recording video here the left up corner of ea
35. rsor to SYSTEM PROJECT Frame turns red means selected and press Enter to enter into system project setup interface Picture is below SYSTEM PROTECT SETTINGS EVERY DAY P RSR SYSTEM UPDATE DEFAULT SETTINGS RESTART DEFAULT APPLY EXIT AUTO RESET When switch is on you can setup the time for device to restart SYSTEM UPDATE Copy the update file to the root directory of the flash disk and insert it into USB groove then press Enter to upgrade the firmware and it will display the process of the system upgrading picture is below 23 WARNING 50 Processing Upgrading don t pull out thumb drive DEFAULT SETTINGS Restore all the settings as the factory setting NOTE make sure that the U drive and power is steady when it is upgradeing 17 PTZ SETUP Move the cursor to PTZ SETUP Icon highlighted when selected press Enter to enter into setting interface you can setup the parameters for each channel separately With direction key or move cursor to the option and press Enter to switch different channels CHANNEL The channel of PTZ connected PROTOCOL select the protocol of different PTZ there are two protocols to switch and the default is Pelco D BAUD RATE select the different baud rate for your PTZ there are 1200 2400 4800 and 9600 DATA BIT there are 5 6 7 8 options to select default setting is 8 STOP BIT 1 and 2 are optional the default setting is 1 VERIFY there
36. s no password press OK to enter preview interface and have your following operation 3 Manufacture has applied Internet line DVR should connect with internet via IP and router i 2 Make sure DVR connect with the internet is correctly Use still configuration mode Please refer to internet setting chapter of Installation guide it can help to set port number IP address sub mask gateway etc Net admin add DVR port transfer or sending relation in router Use a computer of LAN input IP of LAN and port number into IE address column to visit the DVR Use internet remote computer input IP and port number of router to IE address column to visit DVR you can start DDNS function After finishing DDNS register and setting users can visit via DDNS and port number This can avoid remembering complex IP 30 4 IE OPERATION Through the IE browser of OS and install the software you are able to do the network operation remotely which is much more convenient DVR support C S B S and visit in LAN and WAN also support IP and domain name visiting It supports users revise server port At the same time it supports PPPOE DHCP and four channel video audio 4 2 Restriction condition To ensure PC s stable visiting of DVR recommend Windows XP Windows Vista operation system recommend browser as IE 6 0 IE 7 0 4 3 User login Input the DVR local IP in IE browser if the web port number is set as 80 directly input
37. success it will got a dynamic public IP PING XXX XXX XxXX xxx The public IP of DVR to check whether the network is ok and ping XxXx xxx xxx the domain name of DVR Yo check whether the DDNS settings is ok Open IE browser and type in the domain name of DDNS if WEB port is not 80 you should add a port please refer to IE setup Please download the IE control then enter into login interface the default setting has no password Press enter and into the preview interface and do what you want 28 according to your need N Applied ADSL many types of equipment should share and connect with internet 1 Need to confirm with internet manufacture the ADSL you applied should permit multi share of the internet 2 You should buy a router currently many small routers of 4 port Hub is in the market or your ADSL Modem has router function 3 Refer to router user manual to ensure equipment connection correct 4 Start PPPOE function of PPPOE use router to have ADSL 5 Suggest stopping router s DHCP function DVR and the computer all adopt IP Notice DVR computer and router s IP must in the same subnet and the sub mask gateway DVR internet setting NETH WORK Computer internet setting l Local Area Connection Properties Internet Protocol TCP IP Properties General Authentication Advanced ji Connect using You can get IP settings assigned automatically if your network supports this capability Oth
38. t day The searching result will be showed in the below date frame 2 DATE It will show all the recording status in this day you can playback the record file in this period via click the corresponding period Every grid stands for one hour Method 3 playback by file list Input the searching date click SERACH and you can see the recording status Click an exact day and then click detail file and then you can see the interface of detail file CHANNEL There are CH1 CH2 CH3 CH4 and QUAD totally 5 options Press Enter and you can change the channel to be displayed TYPE There are all normal and alarm totally 3 options Press Enter and the content will be displayed in a list FILE LIST TYPE ALL E CH TIME SIZE TYPE BAK 1 00 00 00 00 30 00 303 4M Normal 2 090 00 00 00 30 00 303 6M Normal Instruction 1 File Detail List Channel number shows the recording file belong to number showed channel record Recording time is the recording beginning time to end time 12 SIZE is the size of this file Unit MByte TYPE is the type of recording file There are two types normal and alarm Backup in the lower right corner of menu can backup the selected files to USB storage 2 Moving the cursor to select the files and press OK to enter into playback interface lf more than one channel have recording files during selected time will playback all at the same time
39. uit to check lt Is activation of the audio source connected to the video channel You can click to full screen to determine lt The hardware of DVR is fault Question Why there is no voice when playing back Answer lt Setting problem open audio video item lt Check the audio whether it is closed in playback interface Question Why the system time is not right Answer lt Setting wrong or users didn t click Edit to make it validity lt Battery not connected well lt The battery is invalid Please change one Question Why DVR can t control the PTZ Answer The front end PTZ is fault The PTZ decoder setting connecting and installing is not correct The connect is not correct The PTZ setting of DVR is not correct The PTZ decoder does not match with the DVR agreement A When connecting multi decoder 120 Q electric resistances should add at the end of PTZ decoder AB line or else PTZ will not be stable lt The distance is too far Question Why the Stop recording by the right mouse button does not work how to stop recording Answer lt The Stop recording by the right mouse button is only suitable for Manual recording It can t stop recording when it s in start recording or the video in 47 12 13 14 15 16 video plan lt Ifyou want to stop recording please set the time is not recording Question How much space of HDD for recording per hour Answer lt Each
Download Pdf Manuals
Related Search