Sakamoto Blood Pressure Simulator
Contents
1. M178 S Sakamoto Blood Pressure Simulator SAKAMOTO MODEL CORPORATION User s Manual 131029 INDEX Introduction Table of Contents 1 Purpose Content 2 Cautions on Use 3 Instructions for Use 4 Storage Instructions 5 Please open your parcel and check the main unit and accessories of the product immediately upon receipt If the products are delivered damaged or with parts missing please contact our company or the distributor AARTI WAE TIL Introduction Thank you for purchasing our product Sakamoto Blood Pressure Simulator Read this user s manual carefully in order to use the product for a long time appropriately This product is closely checked before factory shipment However when this product arrives open it soon and check if anything on the main unit and accessories are missing or broken Table of contents Introduction Table of Contents cccceeeeeeeeeeees 1 Purpose Comte nts ncncts e s 2 Cautions om Use deiae a a 3 suc ons Tor Usen E 4 Storace Instructi nS ir anie an d a 5 Purpose This product is used to perform training for the following items e Set and auscultate for high blood pressure low blood pressure e Set and measure pulse rates Content 1 Control box Qty 1 2 Mercury sphygmomanometer Qty 1 3 Power cord Qty 1 4 Simulated skin set pulse simulator speakers cord Qty 1 5 Manchette with Y t2. hen the reading for the bar LCD is blinking as sc sn ai ee shown in the diagram Dot flashing Zero Dot lit up Ready setting in progress for measurement 10 The sphygmomanometer provided is equipped with the hold function Refer to the manual provided with the sphygmomanometer for further details 11 Ifa defect or problem with the product is discovered during use stop using the product immediately and contact Sakamoto Model or an authorized dealer 12 This product is a simulator capable of supporting advanced medical training However Sakamoto Model does not guarantee the same results during actual treatment 13 Please note that the specifications of this product may be changed without prior notice in order to make improvements to the product 3 Instructions for Use 1 Connect the power cord to the control box 2 Attach the transparent tube which is connected to the mercury sphygmomanometer to the control box After connecting the tube rotate to securely attach it 3 After making sure that no air is inside the cuff and that the sphygmomanometer reads zero connect the cord on the simulated skin pieces to the control box Connect the cord so that the arrow is on top 4 Connect the plug to an electrical socket Once connected the power automatically turns on 5 Fit the simulated skin pieces onto the arm The band naturally fits and curls around the arm so it needs to be uncurled before fitti
3. himogamo Sakyo ku KYOTO 606 0865 JAPAN Phone 81 75 701 1135 Fax 81 75 722 5638 E mail info sakamoto model com URL http sakamoto model co jp Overseas Sales Department 9 29 Senbahigashi Minoh City Osaka 562 0035 JAPAN Phone 81 72 729 8350 Fax 81 72 729 8385 E mail trade sakamoto model com
4. ng it onto the desired site The wrist piece and the arm piece are noted on the back of the simulated skin pieces After fitting the pieces onto the wrist and arm rotate and face the silicon simulated skin to the desired position 6 Wrap the manchette around the upper simulated skin piece on the arm 7 Set the maximum and minimum blood pressures and the pulse rate on the control box If the Select button is pressed the arrow lt 4 moves to the items in the following order SBP DBP and Pulse Stop at the value you wish to set and turn the nozzle to set the value The blood pressure and the pulse can be set to the following ranges respectively 50 250 and 20 150 If the pressure on the manchette increases the real time pressure appears on the Monitor on the control box display When necessary the setting screen can be hidden by pressing the ON OFF button on the control box 8 External speakers can also be attached 4 Storage Instructions 1 Disconnect the power cord and the simulated skin set cord from the control box before storing The cords may snap or break if wrapped around the control box when stored 2 Handle the cords and tubes with care and avoid any excessive pulling or bending 3 Avoid storing the product in direct sunlight or in locations with high temperature and humidity SAKAMOTO MODEL CORPORATION Head office 34 Higashitakagicho S
5. ube and transparent tube Qty 1 6 Stethoscope Qty 1 Cautions on Use 1 If any excessive loads are hung from the product or if dropped it will damage the product 2 Handle the cords and tubes with care and avoid any excessive pulling or bending 3 The simulated skin pieces and cords are designed not to be removed or disconnected Therefore do not attempt to disconnect them using excessive force 4 Open the valve on the mercury sphygmomanometer before use Refer to the user manual that is provided with the mercury sphygmomanometer for further details 5 Do not let the control box or simulated skin pieces get wet 6 Ifthe Y tube disconnects insert the short tube that is connected to the mercury sphygmomanometer the tube that comes from the manchette and the transparent tube that connects to the control box 1 ft ad a 7 If the sphygmomanometer value and the control box value are not accurate first turn off the power Then discharge all the air from the cuff set the sphygmomanometer to zero and turn the power back on 8 A hand held sphygmomanometer can also be used If that is the case remove the manchette on the sphygmomanometer from the base and insert the model manchette with the transparent tube 9 There is a digital sphygmomanometer that is provided It is WE 39 La HE 39 equipped with a zero setting function Make sure that the cuff is 20 ze Ue ee not inflated w
Download Pdf Manuals
Related Search