pawz away® mini pet barrier
Contents
1. pawz away mini pet barrier operating and training guide PLEASE READ THIS ENTIRE GUIDE BEFORE BEGINNING Important Safety Information Explanation of Attention Words and Symbols used in this guide This is the safety alert symbol It is used to alert you to potential personal injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death AWARNING CAUTION NOTICE AWARNING N WARNING indicates a hazardous situation which if not avoided could result in death or serious injury CAUTION used without the safety alert symbol indicates a hazardous situation which if not avoided could result in harm to your pet NOTICE is used to address safe use practices not related to personal injury Not for use with aggressive dogs Do not use this product if your dog is prone to aggressive behavior Aggressive dogs can cause severe injury or death to their owners and others If you are not sure that this product is right for your dog please talk to your veterinarian or a certified trainer This System is NOT a solid barrier The system is designed to act as a deterrent using Static Correction to condition pets to remain outside of the established barrier area It is important that you reinforce training with your pet on a regular basis Since the tolerance level to Static Correction varies from pet to pet Radio Systems Corporation CANNOT guarantee that the system will in all cases keep a2. Ifthe condition persists beyond 48 hours see your veterinarian For additional information on bed sores and pressure necrosis please visit our website These steps will help keep your pet secure and comfortable Millions of pets are comfortable while they wear stainless steel contacts Some pets are sensitive to contact pressure You may find after some time that your pet is very tolerant of the collar If so you may relax some of these precautions It is important to continue daily checks of the contact area If redness or sores are found discontinue use until the skin has fully healed You may need to trim the hair in the area of the Contact Points Never shave the pet s neck this may lead to arash or infection e To prevent an unintended correction do not perform set up procedures while the Receiver Collar is on your pet e lf you are using a collar and leash for training be sure the extra collar does not put pressure on the Contact Points of the Receiver Collar www petsafe net 3 Thank you for choosing PetSafe brand You and your pet deserve a companionship that includes memorable moments and a shared understanding together Our products provide you with the tools and technologies to successfully train your pet If you have any questions about our products or training your pet please visit our website at www petsafe net or contact our Customer Care Center at 1 800 732 2677 To get the most protection out of your warranty
3. 2 Turn the Barrier Transmitter OFF by pressing the button until there are no bars displayed in the LCD window Remove the back cover 3 The mode switch is located inside the transmitter and is preset to mode A Move the switch to the center position for mode B or to the right position for mode AB 5A Once you have selected the desired mode ea replace the back cover eaen posen wose pi Note If you have selected mode AB you do not need partery to proceed with programming the receiver in the next parrery steps Receiver Collars set to mode A or mode B will each receive the radio signal from a Barrier Transmitter set to mode AB Transmitter Inside Inside View Position mone AB SWITCH 14 Customer Care Center 1 800 732 2677 4 To program the Receiver Collar to either mode A or mode B press and hold the button and then press the button for approximately 5 seconds Programming is complete when you hear a series of three beeps from the Receiver Collar Once the Receiver Collar has been programmed press the button to turn the Barrier Transmitter ON Check to make sure the black bar s appear on the LCD screen indicating the mode you have selected 5B and reset the Barrier Transmitter to the desired range 5 www petsafe net 15 LLE KETEG The PetSafe Pawz Away Mini Pet Barrier operates on the principle of positive and negative reinforcement
4. Your pet will learn to avoid the Barrier Areas you have set after receiving a Progressive Static Correction negative reinforcement and your pet will learn that he is more comfortable when he avoids the Barrier Areas positive reinforcement In some cases it may not be necessary to train your pet You can let your pet wander freely to determine the new boundaries Monitor your pet during his first session Pets learn at different rates and it may take several times for your pet to successfully understand and honor the Barrier Areas Begin Your Pet s First Session 1 Move your pet away from the Barrier Area 2 Activate the Receiver Collar by turning the battery door to the ON position Place the Receiver Collar around your pet s neck Be sure that the Receiver is directly under your pet s neck 3 Allow your pet to wander freely to learn the new boundaries Further Training If your pet is confused or unsure how to avoid the Barrier Areas then you may need to teach your pet how to do so by following these easy training steps 1 Place a second non metallic collar on your pet ABOVE the Receiver Collar and attach a long leash CAUTION 2 Walk your pet toward the Barrier Area As soon as you hear the tone or you see that your pet is receiving a Static Correction gently pull him away from the Barrier Area and back into the safe zone 3 Reward your pet with praise each time he leaves the Barrier Area 4 Practice this technique a few
5. Care Center Please see the Accessories section of this Operating and Training Guide for more information www petsafe net 9 gt Adjust the tightness of the Receiver Collar to fit your pet s neck Check the tightness of the Receiver Collar by inserting one finger between the end of a Contact Point and your pet s neck The fit should be snug but not constricting 4B 5 Allow your pet to wear the Receiver Collar for several minutes then recheck the fit Check the fit again as your pet becomes more comfortable with the Receiver Collar 6 Once you are satisfied with the fit of the Receiver Collar then you may trim any excess collar strap as follows 4C a Mark the desired length of the Receiver Collar with a pen Allow for growth if your pet is young or grows a thick winter coat b Remove the Receiver Collar from your pet and cut off the excess c Before placing the Receiver Collar back onto your pet seal the edge of the cut collar by applying a flame along the frayed edge To Re Thread the Collar Slide Buckle The slide buckle prevents the collar from becoming loose around your pet s neck The ridges must be facing up the collar will slip if it is not properly threaded Customer Care Center 1 800 732 2677 Receiver Collar Batteries The PetSafe Pawz Away Receiver Collar uses two 3 volt Lithium coin cell batteries size CR2032 Replacement batteries can be found at many retailers or through the C
6. Collar Batteries Warranty IAEE E EALE OST EAE E A Sued Sods NESS tek E IITE Additional Features eeen Time Qut Feature sinicure ivnisi Mode A B and AB Feature hi Programming the Mode Settings R EEE 14 4 Customer Care Center 1 800 732 2677 Components Barrier Transmitter 3 AAA Batteries not included Test Light Tool Receiver Collar 2 3 V Lithium Batteries for Receiver Collar Cat Collar Strap o Eee ae www petsafe net Other Items You May Need Drill and mounting hardware Non metallic collar and leash Scissors Lighter How the System Works The PetSafe Pawz Away Mini Pet Barrier keeps your pet away from a certain room away from trash off of furniture etc Just place the Barrier Transmitter near the area your pet should avoid The Mini Pet Barrier transmits an elliptical radio signal adjustable up to 5 feet Your pet wears a Receiver Collar with Contact Points that touch his neck When your pet enters the Barrier Area he ll hear a series of audible tones from the Receiver Collar and he will feel a safe Progressive Static Correction delivered through the Contact Points on his neck The Progressive Static Correction will get his attention but will not cause harm The correction continues until your pet leaves the Barrier Area If your pet doesn t leave the collar will continue to correct at the maximum level from 3 seconds until the 15 second time out The PetSafe Pawz Aw
7. Product if your pet is less than 5 pounds or if your pet is aggressive If you are unsure whether this is appropriate for your pet please consult your veterinarian or certified trainer Proper use includes reviewing the entire Guide provided with your Product and any specific Caution statements No Unlawful or Prohibited Use This Product is designed for use with pets only This pet training device is not intended to harm injure or provoke Using this Product in a way that is not intended could result in violation of Federal State or local laws Limitation of Liability In no event shall Radio Systems Corporation be liable for any direct indirect punitive incidental special or consequential damages or any damages whatsoever arising out of or connected with the use or misuse of this Product Buyer assumes all risks and liability from the use of this Product Modification of Terms and Conditions Radio Systems Corporation reserves the right to change the terms conditions and notices under which this Product is offered www petsafe net 19 Compliance FCC Canada This Class B digital apparatus complies with Canadian ICES 003 This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment This equipment generate
8. at Radio Systems Australia Pty Ltd PO Box 765 Mudgeeraba OLD 4213 Australia Residents 1800 786 608 New Zealand Residents 0800 543 054 Email info petsafeaustralia com au To file a claim a proof of purchase must be provided Without a proof of purchase Radio Systems will not repair or replace faulty components Radio Systems requests the Consumer to contact the Radio Systems Customer Care Centre to obtain a Warranty Return number prior to sending the Product Failure to do so may delay in the repair or replacement of the Product If the Product is deemed to be faulty within 30 days from date of original purchase Radio Systems will organise for a replacement to be sent in advance of returning the faulty Product A Post Bag will be included with the replacement Product for the return of the faulty Product The Product must be returned within 7 days of receiving the replacement If the Product is deemed to be faulty after 30 days from the date of original purchase the consumer will be required to return the Product to Radio Systems at the consumer s own expense Radio Systems will test and replace the faulty unit or its components and return to the consumer free of charge provided the Product is within its said warranty period This warranty is in addition to other rights and remedies available to you under the law Radio Systems goods come with guarantees that cannot be excluded under the Australia Consumer Law You are entitled to a replace
9. set to mode A will not pick up the signal from a Barrier Transmitter set to mode B When the Barrier Transmitter is set to mode AB the Barrier Transmitter denies access to all pets wearing the Receiver Collar no matter which mode the receiver is programmed to www petsafe net Barrier Transmitter Barrier Transmitter AB Barrier Transmitter 13 Programming the Mode Settings All programming is done through the Barrier Transmitter and the programming is synchronized with the Receiver Collar The Receiver Collar cannot be programmed separately from the Barrier Transmitter You may synchronize multiple Receiver Collars to a single Barrier Transmitter at one time However make sure any Receiver Collar you do not wish to synchronize is turned OFF during the programming procedure Any collar that is within 30 inches of the Barrier Transmitter and turned ON may be reprogrammed Familiarize yourself with the steps outlined below before attempting to program the Barrier Transmitter and Receiver Collar eC To prevent an unintended correction do not perform set up procedures while the Receiver Collar is on your pet 1 Gather the Receiver Collar s you wish to synchronize with the Barrier Transmitter Turn the Receiver Collar s ON and place less than one foot from the Barrier Transmitter
10. a metal wall Place Barrier Transmitter on metal surfaces Place Barrier Transmitter near large metal objects such as refrigerators washers etc Place Barrier Transmitter near audio speakers Set Up the Barrier Transmitter NOE To prevent an unintended correction never perform set up procedures while your pet is wearing the Receiver Collar 1 Turn over the Barrier Transmitter and rotate back cover counter clockwise removing the back cover Install three AAA alkaline batteries and replace the back cover Turn clockwise to secure cover A 2 Turn the Barrier Transmitter right side up and press the button once to turn ON the Barrier Transmitter A black bar in the upper right hand corner of the LCD display PGM window indicates that the Barrier Transmitter is set to mode A 2A A second black bar in the bottom of the LCD display indicates the range is set to one segment 3 Each segment represents approximately 5 inches from the unit You can create a Barrier B Area of 5 inches to 30 inches from the unit Using the and buttons adjust the i range to fit the desired pet Barrier Area www petsafe net 7 All Mini Pet Barriers and Receiver Collars are preset to mode A The A and B mode feature is designed to be used in multiple pet households where you may want one pet to be able to access an area while preventing access by another pet For single pet households you will not need to operate the Barrier Transmitter in any mod
11. ay Mini Pet Barrier has been proven safe comfortable and effective for pets at least 6 months old and 5 pounds or more Key Definitions Barrier Transmitter Transmits the wireless radio signal Barrier Area Area that you want to prevent your pet from gaining access to Receiver Collar Receives the radio signal from the Barrier Transmitter Contact Points Deliver the safe Progressive Static Correction when your pet enters the Barrier Area Progressive Static Correction Static correction begins at the lowest level and automatically increases to maximum within 3 seconds of first detection in the Barrier Area From 3 seconds until the 15 second time out the collar will continue to correct at the maximum level until your pet leaves the Barrier Area 6 LCD Display Window Up Button Barrier T Transmitter Collar Receiver Down Button Customer Care Center 1 800 732 2677 Operating Install the Barrier Transmitter The Barrier Transmitter emits a radio signal from all sides in an elliptical pattern The signal may transmit through a wall or the ceiling floor The Barrier Transmitter can be placed laying flat on a surface or hung on a wall If you choose to hang the Barrier Transmitter note that the signal becomes very directional the signal will be strongest directly in front of and behind the unit The signal is weakest to the side of the unit Do not e Hang unit on
12. ct on the range depends on the size and shape of the objects Signal range can be reduced if the Barrier Transmitter is placed on a concrete floor due to steel reinforcement in the concrete For best range results place the Barrier Transmitter on a nonconductive surface i e wood floor or table Placing the Barrier Transmitter beneath sofas and beds can reduce the range due to the metal springs altering the magnetic field Customer Care Center 1 800 732 2677 Fit the Receiver Collar on Your Pet Important Proper fit and placement of your Receiver Collar is necessary for effective operation The Contact Points must have direct contact with your pet s skin on the underside of his neck CAUTION Proper fit of the collar is important A collar worn for too long or made too tight on the pet s neck may cause skin damage Ranging from redness to pressure ulcers this condition is commonly known as bed sores Avoid leaving the collar on the pet for more than 12 hours per day When possible reposition the collar on the pet s neck every 1 to 2 hours Check the fit to prevent excessive pressure follow the instructions in this manual Never connect a lead to the electronic collar it will cause excessive pressure on the contacts When using a separate collar for a lead don t put pressure on the electronic collar Wash the pet s neck area and the contacts of the collar weekly with a damp cloth Examine the contact area daily for signs of a
13. d proper residential use will be free from defects in material or workmanship for a period of one 1 year from the purchase date An original retail consumer purchaser is a person or entity who originally purchases the Product or a gift recipient of a new Product that is unopened and in its original packaging When serviced by Radio Systems Customer Service Radio Systems covers labor and parts for the first year of ownership after the first year a service or upgrade charge will apply relative to replacement of the Product with new or refurbished items at Radio System s sole discretion The limited warranty is non transferrable and shall automatically terminate if the original retail consumer purchaser resells the Radio Systems Product or transfers the property on which the Radio Systems Product is installed This Limited Warranty excludes accidental damage due to dog chews lightning damage or neglect alteration and misuse Consumers who purchase Products outside of Australia New Zealand or from an unauthorized dealer will need to return the Product to the original place of purchase for any warranty issues Please note that Radio Systems does not provide refunds replacements or upgrades for change of mind or for any other reason outside of these Warranty terms 22 Customer Care Center 1 800 732 2677 Claims Procedure Any claim made under this Warranty should be made directly to Radio Systems Australia Pty Ltd Customer Care Centre
14. de A refer to Additional Features section beginning on page 12 for instructions Barrier Area range is too low e Check replace batteries in Receiver Collar e Adjust Barrier Transmitter range to increase Barrier Area size Barrier Area range is too high e Adjust Barrier Transmitter range to decrease Barrier Area size Pet seems to receive e Check replace batteries in Receiver Collar no stimulation e Use Test Light Tool to check for static correction e Check Receiver Collar fit to ensure Contact Points have direct skin contact e Check the setting on the Barrier Transmitter Unable to hear e Check Replace batteries in Receiver Collar Receiver Collar tone e Pets easily hear tone but it may be a volume level that is difficult for you to hear e Use the Test Light Tool to check Receiver Collar for static correction No segments on e Press the button Barrier Transmitter e Check replace batteries in Barrier Transmitter 18 Customer Care Center 1 800 732 2677 Terms of Use and Limitation of Liability 1 Terms of Use This Product is offered to you conditioned upon your acceptance without modification of the terms conditions and notices contained herein Usage of this Product implies acceptance of all such terms conditions and notices Proper Use This Product is designed for use with pets where training is desired The specific temperament of your pet may not work with this Product We recommend that you not use this
15. e other than A Please see the Additional Features section of this operating and training guide beginning on page 12 for instructions on how to utilize mode A and B Test the Barrier Area 1 Keeping your hands away from the Contact Points use the edge of the Test Light Tool to turn the receiver battery door to the ON position 2 Hold the Receiver Collar with the Contact Points facing up Place the Test Light Tool on the Contact Points so that the wire in the Test Light Tool touches the Contact Points 3A The PetSafe logo on the Receiver Collar should face the Transmitter 3 Hold the Receiver Collar at the approximate height of your pet s neck 3B Start outside of the range and walk slowly toward the Barrier Transmitter As you reach the Barrier Area the Receiver Collar emits a series of high pitched tones For each tone you hear you should notice the Test Light flashing which indicates that a Progressive Static Correction is being delivered The Receiver Collar s tone is easily heard by pets but may be at a volume level difficult for some humans to hear 4 Check the range of the Barrier Area from multiple angles to ensure you are getting the desired coverage Note Should you find that you are not getting the desired range at the maximum setting move the Barrier Transmitter a foot or change from its standing on end position to laying flat Metal objects can alter the magnetic field and change the transmitting signal range The effe
16. elf and will deliver a Progressive Static Correction the next time your pet enters the Barrier Area Mode A B and AB Feature For multiple pet households additional PetSafe Pawz Away Receiver Collars can be purchased to work with one or more PetSafe Pawz Away Indoor Barrier Transmitters You can set up an unlimited number of Barrier Transmitters in your home and an unlimited number of Receiver Collars can be used with one or more Barrier Transmitters If you have multiple pets you may want to allow one pet access to an area while denying access to another pet With the purchase of additional Receiver Collars and Barrier Transmitters you can accomplish this by using the Mode A and Mode B functions All PetSafe Pawz Away Mini Barrier Transmitters and Receiver Collars come preset to mode A Each Receiver Collar can operate in one of two different modes A or B Each Barrier Transmitter may be set to either A B or AB mode to allow for multiple configurations 12 Customer Care Center 1 800 732 2677 When the Barrier Transmitter and Receiver Collar are set to mode A the Barrier Transmitter denies access to pets wearing a Receiver Collar programmed to mode A Receiver Collars set to mode B will not pick up the signal from a Barrier Transmitter set to mode A When the Barrier Transmitter and Receiver Collar are set to mode B the Barrier Transmitter denies access to pets wearing a Receiver Collar programmed to mode B Receiver Collars
17. ment or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure Should you have any queries or require any further information please contact our Customer Care Centre on 1800 786 608 Australia or 0800 543 054 New Zealand www petsafe net 23 Radio Systems Corporation 10427 PetSafe Way Knoxville TN 37932 1 800 732 2677 www petsafe net Protected by US Patents 7 046 152 7 068 174 7 117 822 7 204 204 7 278 376 7 495 570 8 342 135 J400 028 2 2014 Radio Systems Corporation
18. pet outside of the established barrier area Not all pets can be trained to avoid entering the barrier area Therefore if you have reason to believe that your pet may harm himself or pose a danger to others if he is not kept from entering the barrier area you should NOT rely solely upon this system to restrict your pet Radio Systems Corporation shall NOT be liable for any personal injuries property damage injury to or death of your pet economic loss or any consequential damages sustained as a result of any animal entering the barrier area Customer Care Center 1 800 732 2677 CAUTION Proper fit of the collar is important A collar worn for too long or made too tight on the pet s neck may cause skin damage Ranging from redness to pressure ulcers this condition is commonly known as bed sores Avoid leaving the collar on the pet for more than 12 hours per day When possible reposition the collar on the pet s neck every 1 to 2 hours Check the fit to prevent excessive pressure follow the instructions in this manual Never connect a lead to the electronic collar it will cause excessive pressure on the contacts When using a separate collar for a lead don t put pressure on the electronic collar Wash the pet s neck area and the contacts of the collar weekly with a damp cloth Examine the contact area daily for signs of a rash or a sore lf arash or sore is found discontinue use of the collar until the skin has healed
19. please register your product within 30 days at www petsafe net By registering and keeping your receipt you will enjoy the product s full warranty and should you ever need to call the Customer Care Center we will be able to help you faster Most importantly we will never give or sell your valuable information to anyone Complete warranty information is available online at www petsafe net Table of Contents COMPONENMS wis scccsccsessecssaceseeveisbeaessceceasscaaiteasassseces ses dostesssess 5 Training Guide oo eee seeeeeeeeeneeeeneeeneneeeees Other Items You May Need a Begin Your Pet s First Session How the System Works ccscssssseeseeessesseeeeeteneeeseeesasseneneees Further Training Key Definitions eio a R Additional Information cccccccccccceesssccesssecessseesessseeeeees Operating Guide a Accessories sesseeeeeeeeeennnnnnnececeeeeesnnnnnsasaneeeeenssnnunnasacesettee Install the Barrier Transmitter cccccccssscccsssccesseeees 7 Troubleshooting oe Set Up the Barrier Transmitter ccceececeeeeseeeeseeeeees 7 Terms of Use and Limitation of Liability 19 Test the Barrier Area a Compliance eeee cosseeenssecennssecennsscecnnaseceonsseeennasseesny Fit the Receiver Collar on Your Pet secere g Customer Care International Be To Re Thread the Collar cccccccccscccccceccccessrscseeuseceesseceee Perchlorate Battery iisccsccisciccsissetsecssccsesassvisessvacpansaasssteases Receiver
20. rash or a sore If arash or sore is found discontinue use of the collar until the skin has healed If the condition persists beyond 48 hours see your veterinarian For additional information on bed sores and pressure necrosis please visit our website These steps will help keep your pet secure and comfortable Millions of pets are comfortable while they wear stainless steel contacts Some pets are sensitive to contact pressure You may find after some time that your pet is very tolerant of the collar If so you may relax some of these precautions It is important to continue daily checks of the contact area If redness or sores are found discontinue use until the skin has fully healed You may need to trim the hair in the area of the Contact Points Never shave the dog s neck this may lead to a rash or infection To assure a proper fit please follow these steps 1 Using the edge of the Test Light Tool turn the battery door to the OFF position 2 Start with your pet standing comfortably 4A 3 Place the Receiver collar on your pet so that the PetSafe logo is facing your pet s chin Center the Contact Points underneath your pet s neck touching the skin If your pet has a long or thick coat then it may be necessary to trim the hair around the Contact Points to make sure that contact is consistent Note The Receiver Collar comes with Short Contact Points Long Contact Points are available and can be purchased through the Customer
21. s uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction guide may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a practical installation If this equipment causes harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Relocate the interfered receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different to that to which the receiver is connected e Contact the Customer Care Center at 1 800 732 2677 This device complies with Industry Canada Rules This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation Unauthorized changes or modifications to the equipment not approved by Radio Systems Corporation could result in not meeting compliance with FCC regulations and could void the user s authority to operate the equipment Australia This device complies with the applicable EMC requirements specified by the ACMA Australian Communications and Media Authority 20 C
22. times until you feel that your pet is mastering avoidance of the Barrier Areas e sure the extra collar does not put pressure on the Contact Points of the Receiver Collar Be sure to never force or entice your pet to enter the Barrier Areas 16 Customer Care Center 1 800 732 2677 Additional Information e The system should only be used with healthy pets Contact your veterinarian if you have concerns about the medical condition of your pet medication pregnant heart conditions etc e This system is not for vicious or aggressive pets If your pet may pose a threat to others DO NOT USE THIS SYSTEM If you are unsure if your dog is aggressive please consult your veterinarian or a certified trainer Accessories To purchase additional accessories for your PetSafe Pawz Away Mini Pet Barrier contact the Customer Care Center at 1 800 732 2677 or visit our website at www petsafe net to locate a retailer near you PWFO0 14040 Replacement Short and Long Contact Points RK 17 Receiver Collar Battery Door RFA 394 www petsafe net 17 Troubleshooting Barrier Transmitter does not e Check segment indicator on Barrier Transmitter appear to work e Check replace batteries in Barrier Transmitter e Increase the Barrier Area range on the Barrier Transmitter e Check that the Barrier Transmitter setting corresponds to the Receiver Collar setting i e Barrier Transmitter is set to mode A and Receiver Collar is synchronized to pick up mo
23. ustomer Care Center Contact the Customer Care Center at 1 800 732 2677 or visit our website at www petsafe net to locate a retailer near you To replace the batteries 1 Using the edge of the Test Light Tool turn the battery door to the OPEN position 2 Lift the battery door out and turn the door over The two 3 volt Lithium coin cell batteries are stored inside the door 3 Remove the old batteries and insert new batteries with the positive side facing the battery door lid 4 Insert battery door back into the Receiver Collar and turn to either the OFF or ON position to lock the door in place Battery life will vary depending on how often your pet tests the system and receives a Static Correction Check the Receiver Collar and Barrier Transmitter every month to ensure the system is working properly To prolong battery life it is recommended that you turn the Receiver Collar and Barrier Transmitter OFF when not in use www petsafe net www petsafe net 11 Additional Features Time Out Feature For your pet s safety the Receiver Collar has a built in Time Out feature If your pet stays in the Barrier Area for longer than 15 seconds the Receiver Collar will stop delivering the Progressive Static Correction The Receiver Collar will then administer a random single Static Correction every 5 to 10 seconds at the maximum level until the pet leaves the Barrier Area Once your pet leaves the Barrier Area the Receiver Collar resets its
24. ustomer Care Center 1 800 732 2677 Customer Care International USA amp Canada Tel 800 732 2677 Monday Friday 8 AM 8 PM Saturday 9 AM 5 PM Australia Tel 1800 786 608 Monday Friday 7 30 AM 5 PM New Zealand Tel 0800 543 054 Monday Friday 10 30 AM 7 PM This product has the benefit of a limited manufacturer s warranty Details of the warranty applicable to this product and its terms can be found at www petsafe net and or are available by sending a stamped addressed envelope to PetSafe Ltd Redthorn House Unit 9 Chorley West Business Park Ackhurst Road Chorley Lancashire PR7 1NL United Kingdom Perchlorate Battery Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate Warranty One Year Non Transferrable Limited Warranty This Product has the benefit of a limited manufacturer s warranty Complete details of the warranty applicable to this Product and its terms can be found at www petsafe net Australia New Zealand In compliance with the Australian Consumer Law Warranties Against Defects effective January 1 2012 warranty details of this Product are as follows www petsafe net 21 One Year Non Transferrable Limited Warranty What is covered Radio Systems Australia Pty Ltd hereinafter referred to as Radio Systems warrants to the original retail purchaser and not any other purchaser or subsequent owner that its Product when subject to normal an
Download Pdf Manuals
Related Search