Yealink SIP IP Phones Change Log
Contents
1. Yealink P a CSH UcIP mae www yealink co uk Yealink SIP IP Phones Change Log Version 61 YUK FW Version change From x 61 23 15 to x 61 23 16 Change Log 1 Added GlobalSigns Root Certificate Change Log 1 Resolves the AutoP failure to upload tar file after upgrade Example of AutoP file entry openvpn path tmp download cfg server_address http IP ADDREDD vpn client tar YUK FW Version change From x 61 23 13 to x 61 23 14 N A for T20 Change Log 1 Softkey layout when second call received has been optimized YUK FW Version change From x 61 23 12 to x 61 23 13 12 for T20 Change Log 1 Remote Provisioning Server RPS feature added and enabled by default YUK FW Version change From x 61 23 10 to x 61 23 11 10 for T20 Change Log 1 Resolved Account password problem YUK FW Version change From x 61 23 8 to x 61 23 10 9 for T20 Change Log 1 Hot Desking password bug on T2x Yealink SIP Phones Firmware Change Log Yealink P EE EDSY UcIP eee www yealink co uk 2 SIP URL Dialing issue on T2x 3 Music on Hold feature with Invite message containing SDP sendonly on T2x YUK FW Version change From x 61 23 7 To x 61 23 8 Change Log 1 Fixed supporting and character on remote phonebook page for T22 T26 T28 no Remote Phonebook feature on T20 model YUK FW Version change From x 61 23 6 To x 61 23 7 Change Log 1 Set DHCP Active option as enabled by default2. added help icon YUK FW Version change From x 61 23 5 To x 61 23 6 Change Log 1 Added the support of rebooting on Broadsoft feature YUK FW Version change From x 61 23 4 To x 61 23 5 Change Log 1 Added DHCP option autoprovision path yealink config Setting autop cfg dhcp_enable 0 1 YUK Firmware Version change From x 61 23 3 To x 61 23 4 Change Log 1 Fixed the DNS SRV issue 2 Added the filter of illegal characters like lt gt on Dsskey Dial Plan Local Directory Blacklist Broadsoft Calllog options to protect the device from hacker s XSS attacking Yealink SIP Phones Firmware Change Log Yealink EANTA EE EDSY UcIP eee www yealink co uk YUK FW Version change From x 61 23 1 To x 61 23 3 Change Log 1 Keep alive issue the device will send keep alive message after the register is successful We can support TCP way of keep alive message similar to UDP keep alive way 2 Fixed the DTMF RFC2833 dialing IVR tones issue We added an option Phone Features_ DTMF Tone Disable Enable yealink config vpm cfg Profile LOCAL_DTMEF 0 1 3 VOP softphone with RFC4235 issue So the T28 VOP issue can go on again 4 Fixed the STUN issue YUK Firmware Version change From x 60 23 22 To x 61 23 1 Applicable Models SIP T28 T26 T22 T20 T12 Release Date January 9 2012 V61 Primary release feature Call Center field Yealink SIP Phones Firmwar
3. after deleting custom group ringtone in IE web browser 6 Fixed the issue that when T28 has a network conference and a new call was made by the second account the network conference account will not be held before new call was answered 7 Fixed the issue that when the phone use IPV6 address display name of the third party doesn t changed to caller ID after attended semi attended transferring It needs server support 8 Fixed the issue that when update IPV6 address by auto provision the update will failed if the size of configuration file is larger than certain value 9 Fixed transfer failed issue in the Broadsoft Call Manager platform 10 Fixed the issue that after answering or hanging up the incoming call from EHS the ringtone will last a long time 11 Fixed the issue that headset doesn t work in the first call after logining ACD 12 Fixed no ring back tone issue when picking up the handset 13 Fixed the issue that after T28 answering the call it still ring ringback tone 14 Fixed Transfer on Conference Hang up doesn t work issue when work with CosmoCom server 15 Fixed the issue that when pressing TRAN too fast it will create two calls 16 Fixed the issue that when blind transfer by DSS Key the phone sends out transfer message before the server deal with Hold message 17 Fixed the incorrect LED status of BLA issue 18 Fixed dial tone can t be heard issue 19 Fixed the problem of continuous ringing aft
4. CdS Bo Dsskey2 wa Oo oo o o oo oo o T Auto vif DSS key3 N A a to a Instruction When setting DSS Key Type as Conference Value textbox is editable Press DSS Key and conference to the third party during a conversation the third party will enter conference directly when answering the phone In idle status the key works as speed dial Detail Please refer to V61 User Manual for details 17 Username and Password stays in the same interface Instruction When setting DSS Key Type as ACD pressing the DSS key to enter ACD login interface Username and password input textbox stays in the same interface 18 Transfer cancel configuration Instruction During a conversation press Transfer and Cancel key the phone will return to previous conversation interface It s unnecessary to press Resume The function 1s configurable default setting of neutral firmware is disabled 19 Enter the FWD configuration page when pressing FWD key Instruction Pressing TRAN hardkey or DSS key Forward will enter the FWD configuration page on the LCD screen regardless of FWD status is enabled or disabled And you can configure Always Busy No Answer forward directly as you want The function is configurable default setting of neutral firmware is disabled 20 The DND Forward Anonymous Code will only be sent when the status changed Instruction The DND Forward Anonymous code will only be sent when the status changed The code wi
5. Log Level Zero Active Disabled k Wait Time s q Message from webpage PNP Config Export System Log Local Ge System Log Level 6 PCAP Trace Start Cancel Instruction After changing System Log Level and confirm it will prompt System Log Level has been changed do you want to reboot in the webpage Click OK to reboot the phone and the configuration will take effect Click Cancel the phone will not reboot and the configuration will not take effect until the phone reboot 45 It will display package time in the Product ID on the LCD Path Phone LCD gt Menu gt Status gt More gt Phone gt Product ID Instruction It will display package time in the Product ID on the LCD the format is XXXX XXXX XXXX Year Date Hour for example 2011 1118 1906 Yealink SIP Phones Firmware Change Log
6. date display 36 Increased the length of Xml browser URL to 512 37 Adjusted display way of display name of second incoming call 38 Forward international number is configurable now 39 Prompting login failure message and forbidding to login after 3 failed logins 40 Webpage will logout automatically after 5 minutes without operation 41 802 1x password and AES Key are saved and transmitted as ciphertext 42 Optimized Broadsoft No Answer Forward feature 43 After enabling Feature Key Synchronisation the phone will not send 302 message to the server when No Answer Forward 44 It will prompt whether reboot the phone after you changing the System Log Level 45 It will display package time in the Product ID on the LCD Yealink SIP Phones Firmware Change Log Yealink ENANTA ag EDSY UCIP m www yealink co uk 3 Bug Fixes 1 Fixed download error issue when XML phonebook download from the server which used IPV6 address 2 Fixed the character on the cursor position not display issue on T20 phone When adding or editing contacts black list press left navigation key the character will not display on the cursor position 3 Fixed not prompt same name issue when input a contact which has the same name with black list Fixed not ring group ringtone issue after contact in this group deleting custom ringtone 5 Fixed the issue that ringtone will display blank in the webpage when edit group information
7. the issue that password dial feature works in the conversation 34 Fixed the messy codes issue in the updating interface when setting phone language to Korean 35 Fixed the issue that phone stays in initiating interface after updating V61 firmware via HTTP server 99 36 Fixed the issue that phone stays in Firmware Updating Please Wait interface after upgrading via HTTP auto provision 37 Fixed the issue that press cannot dial out the number searching from LDAP phone book 38 Fixed the issue that BLF doesn t work after rebooting when register to 192 168 1 199 server and configure BLE 39 Fixed the issue that var user can access to phone after disabling 3 level user access mode Restrict var accessing to phone and use Action URI feature 40 Fixed the issue that client can crack phone s password by telnet with admin admin Restrict admin and guest user permission 41 Fixed the issue of missing Public Hold and Private Hold configuration items in DSSKey in T20 LCD 42 Fixed the issue that when the phone reboot TLS will register successfully 2 or 3 minutes later 43 Fixed the LDAP delay issue 44 Fixed the issue that MAC address changes to 080028320602 45 Fixed the issue that user level has authority to download bin file by URL 46 Fixed the issue that after inputting a character in the LDAP dialing interface there s no any response when pressing Cancel key 47 Fixed the issue that telne
8. User Manual for details 2 Added Headset Priority feature Path Phone gt Features gt Headset Prior AutoAnswerDelay Headset Prior Enabled DsskeyBlind Tran Enabled A Instruction Enabled Headset Prior and press HEADSET button on the phone you can answer the call with headset by default After you answer the call with headset you can pick up the handset or press Speaker button and it will change to handset or Speaker mode but when the phone returns to idle status or reboots it will switch to headset mode automatically This feature is disabled by default Detail Please refer to V61 User Manual for details 3 Added Dual Headset feature Path Phone gt Features gt Dual Headset SRemoteNameFlash Time seconds 3600 Dual Headset Enabled AutoAnswerDelay Instruction Enabled Dual Headset and press Headset on the phone two headsets can be connected to the phone one connect to headset port the other connect to handset port When in a conversation headset with headset port can speak and listen and headset with handset port can only listen This feature is disabled by default Yealink SIP Phones Firmware Change Log Yealink ENANA E ESY UcIP ae www yealink co uk 4 Added Multicast IP Paging feature 1 Path Phone gt DSS Key gt Memory Key Line Key Memory Key gt gt DSS Key 1 Multicast Paging Auto DSS Key2 N A feP ft DSS Key3 N A fe Jt I
9. as language ringtone and logo after resetting to factory default Changed default input method to 123 in LDAP phone book Instruction The default input method is changed to 123 in the LDAP interface of dialing and returning from searching Optimized date display Instruction Move the date display icon to the right by 3 pixels on T28 LCD screen to make the screen more aesthetic Increased the length of Xml browser URL to 512 Instruction The maximum length of XML browser URL is increased to 512 bytes Adjusted display way of display name of second incoming call Instruction Due to the phone can t display a long display name fully now the display name of second incoming call displays home left Yealink SIP Phones Firmware Change Log Yealink P EE EDSY UcIP ame www yealink co uk 38 Forward international number is configurable now Configure Path Configure following items via auto provision Forward International path Yealink config Features Forward cfg Number This is for Configuring prefix of international number the default is 0O It can be configured as string Instruction In the previous firmware user can only configure whether to forward to the international number start with 00 Now the prefix of international number is configurable and this feature can only be configured via auto provision Detail Please refer to V61 User Manual for details 39 Prompting login failure messa
10. can t be configured Yealink SIP Phones Firmware Change Log Yealink ANANTA EE EDSY UcIP ame www yealink co uk 6 Added PlayHoldTone and PlayHoldToneDelay configuration Path Webpage gt Phone gt Features gt PlayHoldTone PlayHoldToneDelay MulticastCodec G72 w PlayHold Tone Enabled ww PlayHold ToneDelay AllowMute Enabled w Instruction User can define whether to play hold tone or not when holding the call and the tone delay time is configurable It s enabled by default and the default delay time is 30s When the PlayHoldToneDelay is set to 0 the delay time will be 30s by default 7 Added DsskeyBlindTran configuration Path Webpage gt Phone Features gt DsskeyBlindTran Headset Prior Disabled he Enabled ka DTMFReplace Tran Disabled Instruction When DsskeyBlindTran is enabled calls will be blind transferred when pressing Dsskey set as Transfer otherwise calls will be attended transferred It s enabled by default 8 Added DTMFReplaceTran and Tran Send DTMF configuration Path Webpage gt Phone gt Features gt DTMFReplace Tran Tran Send DTMF DsskeyBlind Tran Enabled w DTMFReplaceTran Disabled w Tran Send DTMF SendPoundKey Disabled w Instruction When enabled DTMFReplaceTran and fill a number to the Tran Send DTMF t
11. can be send out 12 Added AutoAnswerDelay configuration in the webpage gt Phone Features 13 Added DHCP Option Value configuration 14 Auto configuration of first account 15 Enabled encryption decryption password 16 Direct conference function 17 Username and Password stays in the same interface when login ACD 18 Transfer cancel configuration 19 Enter the FWD configuration page when pressing FWD key 20 The DND Forward Anonymous Code will only be sent when the status changed 21 Added BLFListBargeInCode configuration 22 Display HD characters 23 Configurable HotDesking feature 24 Added NewCall soft key when holding the call Yealink SIP Phones Firmware Change Log Yealink Pa a CSH UcIP mae www yealink co uk 25 Auto answer when receiving the special NOTIFY message from Asterisk server 26 Different dial tone when account is not registered 2 Emergency incoming call ringtone 28 Supported configure the register status via auto provision when username is blank 29 Supported upload multiple language files via auto provision 30 Supported new Broadsoft network phonebook calllog format 31 Added recording conversation duration feature in Action URL 32 Added recording incoming outgoing calls feauture in Action URL 33 Deleted custom items such as language logo after resetting to factory default 34 Changed default input method to 123 in LDAP phone book 35 Optimized
12. ccounts Unknown Accounto Unknown Instruction This feature allows user to know about the accounts registration status the registration status will be updated simultaneously with account registration changed 2 If you modify something on the webpage during a call the phone will prompt Talking Please update later after that it will return to the previous interface 3 Compatible with IE9 browser Instruction IE9 browser can open the phone webpage normally 4 Added CosmoCom type in the SIP Server Type Path Web page gt Account gt Advanced SIP Server Type Early Media Disabled SIP Server Type Music on hold server Instruction When selecting CosmoCom type phone will register to the Backup Outbound Proxy Server when Outbound Proxy Server was unreachable But 1f Outbound Proxy Server was recovered the phone will not go back to register to the original server Outbound Proxy Server it will stay register to the Backup Outbound Proxy Server Detail Please refer to V61 User Manual for details 5 When Inband or RFC2833 was selected in the DTMF type How to INFO DTMF can t be configured Path Web page gt Account gt Advanced gt DTMEF Type How to INFO DTMF Subscribe Period seconds 1800 P DTMF Payload Scope 96 255 Instruction When Inband or RFC2833 was selected in the DTMF type How to INFO DTMF will be gray it
13. e Change Log Yealink rr a EDSY UcIP mae www yealink co uk 1 New Features Added auto provision code feature Added Headset Priority feature Added Dual Headset feature Added Multicast IP Paging feature Added CosmoCom ACD and synchronization feature Added Music on hold server feature Added SNMP feature Added display name for call forward feature eS aS SS a Supported Caller ID display from remote phonebook 10 Added display XML information from SIP Notify message feature 2 Optimization 1 Added account registration status in the webpage Status 2 If you modify something on the webpage during a call the phone will prompt Talking Please update later after that it will return to the previous interface 3 Compatible with IE9 browser 4 Added CosmoCom type in the SIP Server Type 5 When Inband or RFC2833 was selected in the DTMF type How to info DTMF can t be configured 6 Added PlayHoldTone and PlayHoldToneDelay configuration 7 Added DsskeyBlindTran configuration 8 Added DTMFReplaceTran and Tran Send DTMF configuration 9 Added AllowMute configuration to configure whether allow muting during the call 10 Added Handset Send Volume and Handfree Send Volume configuration 11 Added SendPoundKey configuration If SendPoundKey is enabled and select as send key
14. e new paging call will be ignored temporarily Detail Please refer to V61 User Manual for details 5 Added CosmoCom ACD and synchronization feature Path Phone gt DSS Key gt Memory Key Line Key Yealink SIP Phones Firmware Change Log Yealink ne a EDSY UCIP me www yealink co uk Memory Key gt gt DSS Key1 ACD BE tine ge DSS Key2 N A fe ft sd DSS Key3 N A fe Jt Instruction Optimized original ACD feature and added ACD synchronization feature When login the same account both in webpage and on the phone at the same time their status can be synchronized This feature needs server support Detail Please refer to V61 User Manual for details 6 Added Music on hold server feature Path Account gt Advanced gt Music on hold server Early Media Disabled SIP Server Type Default Instruction During a call if one of party fill a SIP URI in the Music on hold server and hold the call the other party will be held and hear the music from this Music on hold server Resume the call the call will return to normal conversation This feature needs server support Detail Please refer to V61 User Manual for details 7 Added SNMP feature Path Network gt Advanced gt SNMP simpe Active Disabled l Port 065535 Trusted Address fs Instruction User can obtain the phone information through server with SNMP feature It can support 3 server IP address in the Trusted Addre
15. er off hook of T20 20 Fixed the problem of repeatedly registers and unable to receive calls or dial of SCA 21 Fixed the problem that due to INVITE message lacking of genesysid packaged in REFER message SIP server is unable relate REFER and INVITE message 22 Fixed the problem of frequent one way call fault on ININ platform 23 Fixed the problem of the failure when in line initiating conference to out line 24 Fixed the problem that call center is unable to receive DTMF after receiving a call Fixed unregister issue in the public server 25 Fixed the issue that the phone can t register to the public server 26 Fixed the issue that the version field of 802 1 X can t be updated according to switch dynamic so the phone can t be connected by 802 1X 27 Fixed the phone crash issue when Action URL server was down Yealink SIP Phones Firmware Change Log Yealink P a CSH UcIP mae www yealink co uk 28 Fixed the issue that when MissCall send out the URL remote replaces error 29 Fixed the issue that expansion modules don t work when connected several expansion modules 30 Fixed the issue that it doesn t prompt login failed when login ACD with wrong username or password 31 Fixed the issue that when pressing redial button it displays forward number 32 Fixed the issue that when BWCallLogandDir and CallLog are enabled pressing view key and enter broadsoft network call log after a miss call 33 Fixed
16. ge and forbidding to login after 3 failed logins Instruction If input the invalid username or password in login windows for 3 times the webpage will prompt Please contact your support team or try again 3 minutes later As followed You are not authorized to access the web interface Please contact your support team or try again 3 minutes later HTTP 401 40 Webpage will logout automatically after 5 minutes without operation Path Webpage Phone gt Features gt ReLogOffTime 1 1000 minutes Fwd International Disabled Use Logo Custom Logo Gp Instruction The phone webpage will logout automatically over certain time without operation The time is configurable 41 802 1x password and AES Key are saved and transmitted as ciphertext Path1 Webpage gt Network gt Advanced gt MD5 Password 802 1x 802 1X Mode Disabled A Identity y O Yealink SIP Phones Firmware Change Log Yealink P E EDSY Vor mm www yealink co uk Path2 Webpage gt Upgrade Advanced gt Password Common AES Key MAC Oriented AES Key Account O G Password Common AES Key MAC Oriented AES Key Zero Active Disabled l Instruction 802 1x password and AES Key are saved and transmitted as ciphertext 42 Optimized Broadsoft No Answer Forward feature Path Webpage gt Phone Features gt After Ring Time seconds No Answer on off After Ring Time seconds Target On Code Off Code General Informati
17. he DTMF number will be sent out when pressing Tran key and transfer function will be ineffective This feature is for limiting user using transfer function Default setting of neutral firmware is disabled 9 Added AllowMute configuration to configure whether allow muting during the call Path Webpage gt Phone Features gt AllowMute PlayHoldToneDelay SRemoteNameEnable Disabled Instruction User can configure whether allow muting during the call or not Default setting is Enabled When the function is enabled conversation could be muted when pressing Mute key and Mute Key will be ineffective if disabled Yealink SIP Phones Firmware Change Log Yealink EANTA E EDSY VoIP ae www yealink co uk 10 Added Handset Send Volume and Handfree Send Volume configuration Path Webpage gt Phone Features gt Handset Send Volume Handfree Send Volume Headset Send Volume 1 53 GP Handset Send Volume 1 53 Handfree Send Volume 1 53 Instruction These two configuration items enable user to configure the sending volume of handset and handfree mode 11 Added SendPoundKey configuration Path Webpage Phone gt Features gt SendPoundKey Tran Send DTMF SendPoundKey Fwd International Instruction If enable SendPoundKey and select as send key can be send out 12 Added AutoAnswerDelay configuration Path Webpage Phone gt Features gt AutoAns
18. ll not be sent when the phone power on 21 Added BLFListBargeInCode configuration Path Webpage gt Account gt Advanced gt BLFListBargeInCode Yealink SIP Phones Firmware Change Log Yealink P EE EDSY UcIP ame www yealink co uk BLF List Code Oo G Shared Line Disabled v Instruction User can fill Bargein code in the BLFListBargelnCode field and fill Pick up code in the BLF List Code field The phone will send different feature codes according to the led status of BLF list In a conversation pressing BLF List key will barge in the call When there s an incoming call pressing BLF List key will pick up the call Detail Please refer to V61 User Manual for details 22 Display HD characters Instruction When the phone uses G722 codec it will display HD characters at the lower right corner of the LCD interface the start of the second line in T20 23 Configurable HotDesking feature Instruction The function enables user to configure the phone on whether to hide or display the options of the register guide Register Name User Name Password Sip Server and Outbound when power on and press DSS Key And the HotDesking account information can be configured from the webpage or LCD screen The HotDesking account is the first account in the webpage or LCD screen Configure following items via auto provision Power on HotDesking_StartUp Configure display items when enabled Logon Wi
19. m SIP Notify message it s disabled by default Detail Please refer to V61 User Manual for details 11 Added four new action URL options Path Phone gt Features gt Action UR contort a CalRemoteBusy DSSS y CalRemoteCancel DSSS y Refusecalincom SSS Instruction CallInterrupt This happens when the call is cancel on the linking page CallRemoteBusy This happens when the other party is busy and your call is forbidden CallRemoteCancel This happens when the other party cancel your call RefuseCallIncom This happens when you refuse the incoming call Detail Please refer to V61 User Manual for details 12 Added the support of TR069 Path Upgrade gt TR069 Yealink SIP Phones Firmware Change Log Sa COSY VolP Yealink ee www yealink co uk Enable TRO69 Disabled ki ACS Password ACS URL haa al Enable Periodic Inform Enabled Periodic Inform Interval seconds ConnectionRequestUsername Doo ConnectionRequestPassword Po Detail Please refer to V61 User Manual for details Yealink SIP Phones Firmware Change Log E COSY VolP a fae Yealink YEALINK UK LTD www yealink co uk 5 Instruction Optimization 1 Added account registration status in the webpage gt Status Path Web page gt Status Register Status Accountl 8521 192 168 1 199 Registered Account 1001 10 1 3 45 Registered Account3 104 10 1 35 54 DISABLE Account 5553509904 as mcm net mx Registered A
20. nstruction User can select Multicast Paging in the DSS Key and fill the multicast IP address For example 224 0 1 15 10000 then user can start paging with this IP address 2 Path Contacts gt MulticastIP Local PhoneBook BlackList Remote PhoneBook Phone CallInfo LDAP Broadsoft CallLog MulticastIP Paging Barge 10 Tl NOTE Paging Priority Active Enabled a salrabee 1 IP Address 224 0 1 15 10000 test 1 2 IP Address 2 3 IP Address 3 4 IP Address 4 5 IP Address 5 6 IP Address 6 7 IP Address 7 8 IP Address 8 9 IP Address 9 10 IP Address 10 Confirm Cancel Instruction User can set 10 listening address for receiving paging The first IP address has the highest priority The 10 IP address has the lowest priority In a conversation whether to receive paging depends on the value of Paging Barge If the value is 10 it means any paging call can barge in the current conversation If the value is 1 it means only the first paging call can barge in the current conversation When Paging Priority Active is Enabled and in a paging call the phone will receive new paging call according it s priority if the new paging call has the higher priority than current call it will barge in otherwise it won t When Paging Priority Active 1s Disabled th
21. on Call Waiting Call Waiting Tone Auto redial Key As Send Reserve in User Name Button Sound Send Sound Enabled Instruction On Broadsoft server After Ring Time is calculated by ring times While in Yealink phones After Ring Time is calculated by ring time seconds Now it changed to following ways in V61 1 Configure ring times on Broadsoft server and the period is 6 seconds each time 2 Configure ring time seconds on phones 3 To sync phone with server the equation should be Time on Phone 6 Times on Server 43 After enabling Feature Key Synchronisation the phone will not send 302 message to the server when No Answer Forward Configure Path Configure following items via auto provision Forward path Yealink config Features Forward cfg Yealink SIP Phones Firmware Change Log Sa EJS VolP fae Yealink YEALINK UK LTD www yealink co uk UseLocalFwd Instruction When UseLocalFwd 0 and Feature Key Synchronisation feature is enabled the phone will not send 302 message to the server when No Answer Forward is enabled Instead the server will transfer automatically When UseLocalFwd 1 the phone will send 302 message to the server The default setting is 1 This feature can only be configured via auto provision 44 It will prompt whether reboot the phone after you changing the System Log Level Path Webpage gt Upgrade gt Advanced gt System
22. on is configurable and default setting of neutral firmware is enabled Supported upload multiple language files via auto provision Configure Path Configure following items via auto provision Yealink SIP Phones Firmware Change Log 30 31 32 33 34 35 36 37 Yealink Pa Sa EJS VolP www yealink co uk Lang path tmp download cfg server_addr_num N N means the number of uploading files server_address1 server_address2 server_address3 server_addressN Instruction User can upload multiple language files via auto provision Detail Please refer to V61 User Manual for details Supported new Broadsoft network phonebook calllog format Instruction The phone is compatible with the format of new Broadsoft network phonebook calllog The function is configurable default setting of neutral firmware is disabled Added recording conversation duration feature in Action URL Instruction The function supports variable duration in Action URL for recording conversation duration Detail Please refer to V61 User Manual for details Added recoding incoming outgoing calls feature in Action URL Instruction The function supports variable callDirection in Action URL for recording incoming outgoing calls Detail Please refer to V61 User Manual for details Deleted custom items such as language logo after resetting to factory default Instruction The phone will delete custom items such
23. ormation 1 stands for deleting original information and displaying this item The default value is 1 Detail Please refer to V61 User Manual for details Added NewCall softkey when holding the call Instruction Added NewCall soft key on Hold interface so user can make a new call directly Auto answer when receiving the special NOTIFY message from Asterisk server Instruction The phone will be auto answered on speaker mode when received special NOTIFY message from Asterisk server Different dial tone when account is not registered Instruction According to different dial tones user can see whether current account has been registered The dial tone frequency of unregistered is 440 250 0 250 440 250 0 250 The function is configurable and default setting of neutral firmware is disabled Emergency incoming call ringtone Path Webpage gt Phone gt Preference Ring Tones ea cn Upload Ringtone 28 29 Instruction Emergency ringtone is added When receiving Invite message includes DS CALL type emergency header the phone will play emergency ringtone And when Invite message does not include DS CALL type emergency header the phone plays regular ringtones Supported configure the register status via auto provision when username is blank Instruction When the configuration file for auto provision is with blank username while account status is enabled account can be activated The functi
24. ss and they can be separated by space It s disabled by default Detail Please refer to V61 User Manual for details 8 Added display name for call forward feature Instruction When the phone receives a forward call it can display the name of caller and transferrer on the screen The display name depends on the message sent from server When invite message includes History info header field it will display the name of the first transferrer When invite message includes Diversion header field it will display the name of the last transferrer This feature needs server support Detail Please refer to V61 User Manual for details Yealink SIP Phones Firmware Change Log Yealink P a EDSY VoIP ae www yealink co uk 9 Supported Caller ID display from remote phone book Path Phone gt Features gt SRemoteNameEnable SRemoteNameFlashTime AllowMute Enabled A SRemoteNameEnable Enabled A SRemoteNameFlash Time seconds 3600 Dual Headset Disabled Instruction If the incoming call number was saved in the first remote phonebook the name can be displayed in the phone screen It s disabled by default The update time of remote phonebook can be configured 10 Added display XML information from SIP Notify message feature Path Phone gt Features gt SIP Notify PushXML Server IP ee SIP Notify Enabled SaveCallHistory Enabled g Instruction The phone can display XML information fro
25. t password doesn t take effect if you don t reset to factory default 48 Fixed the issue that the phone will not use the DNS server provided from DHCP server after upgrading to the latest firmware And the phone will register failed if you don t reboot the phone 49 Fixed the issue that when sending the message of Music on hold the IP address in the c line of SDP was incorrect 50 Fixed the issue that after picking up the call it will not display Caller ID on the LCD 51 Fixed Open VPN connection fail issue 52 Fixed the issue that when there s a second incoming call there s no any sound after 5 minutes 53 Fixed the echo issue when there s a second incoming call Yealink SIP Phones Firmware Change Log Yealink Pa EE EDSY UcIP ame www yealink co uk 4 Instruction New Features 1 Added auto provision code feature Instruction Configure following items in the configuration file by auto provision autoprovisionX X 1 50 Path yealink config Setting autop_code cfg Name code server_address user password AES MAC_AES This feature is for configuring code for auto provision URL When there s no account registered press code in idle status it will prompt a window to ask whether update the phone from the corresponding server_address Press OK to download the configuration file from this server_address press Cancel to return to idle status Detail Please refer to V61
26. werDelay Dual Headset AutoAnswerDelay Headset Prior Instruction The function enables user to configure auto answer delay range from 1 4s Default setting is Is 13 Added DHCP Option Value configuration Path Webpage gt Upgrade gt Advanced gt DHCP Option Value Custom Option Type DHCP Option Value T URL A Instruction The function enables user to configure DHCP option value and DHCP server can identify the phone type Default setting is yealink Detail Please refer to V61 User Manual for details 14 Auto configuration of first account Instruction The User name and Register name of the first account will be auto configuration when the phone is upgraded or reset to factory default This feature is disabled by default Form z9hG4bK local phone MAC no spaces in between If MAC address is 001565113068 then User name and Register name are both z9hG4bK001565113068 Yealink SIP Phones Firmware Change Log Yealink err a EDSY UCIP ae www yealink co uk 15 Enabled encryption decryption password Instruction The function enables user to encrypt or decrypt the password When setting EnLock 0 password is saved to phone as cleartext And EnLock 1 password is saved as ciphertext Default setting of neutral firmware is EnLock 1 to enhance password security 16 Direct conference function Path Webpage gt Phone gt DSS Key EXT key Memory Key gt gt DssKey1 conference L
27. zard and power on path yealink config Setting Setting cfg RegisterName O stands for hiding this item 1 stands for displaying this item The default value is 1 UserName O stands for hiding this item 1 stands for displaying this item The default value is 1 Password O stands for hiding this item 1 stands for displaying this item The default value is 1 SipServer O stands for hiding this item 1 stands for displaying this item The default value is 1 Outbound O stands for hiding this item 1 stands for displaying this item The default value is 1 Pressing DSS Key HotDesking_Dsskey path yealink config Setting Setting cfg RegisterName O stands for not deleting original information 1 stands for deleting original information and displaying this item The default value is 1 Yealink SIP Phones Firmware Change Log 24 25 26 27 Yealink P Sa EJS VolP www yealink co uk UserName 0 stands for not deleting original information 1 stands for deleting original information and displaying this item The default value is 1 Password O stands for not deleting original information 1 stands for deleting original information and displaying this item The default value is 1 SipServer O stands for not deleting original information stands for deleting original information and displaying this item The default value is 1 Outbound O stands for not deleting original inf
Download Pdf Manuals
Related Search