PRODUCT SPECIFICATION
Contents
1. LG Chem Prepared PRODUCT SPECIFICATION CONFIDENTIAL Document No LGCIEM BD BTC BL Oh Kyung Su BCY PS HB2 Rev1 Appr coved Description LGCIEM BD BTC Ahn Soon Ho Lithium lon ICR18650HB2 1500mAh Rechargeable Lithium lon Battery Model ICR18650HB2 1500mAh Prepared Reviewed Approved Oh Kyung Su Ku Cha Hun Ahn Soon Ho be Wx Date 10 03 11 de Date 10 03 11 KA Date 10 03 11 LG Chem 20 YOIDO DONG YOUNGDUNGPO GU SEOUL 150 721 KOREA TEL 82 2 3773 1114 FAX 82 2 3773 7005 http www lgchem com Date 2010 05 07 Description LG Chem Lithium Ion ICR18650 HB2 1500mAh Revision History PRODUCT SPECIFICATION CONFIDENTIAL Document No Date Rev BCY PS HB2 Rev1 2010 05 07 1 Revision Date Originator Description 0 2010 03 11 Oh Kyung Su Original Release Definitions of standard charge discharge and fast 1 2010 05 07 Oh Kyung Su charge discharge were corrected Measurement of recovery capacity was corrected 2 9 PRODUCT SPECIFICATION LG Chem CONFIDENTIAL Description Document No Date Rev Lithium Ion ICR18650 HB2 1500mAh BCY PS HB2 Rev1 2010 05 07 1 Contents Revision History E Eenegkeet 1 General Information E 1 1 Scope 1 2 Application 1 3 Product Classification 1 4 Model Name 2 Nominal Specification anaaaeea eaaa aa2. This charge discharge cycle shall be repeated three times to measure the recovery capacity 6 9 LG Chem Lithium Ion ICR18650 HB2 1500mAh Description CONFIDENTIAL Document No BCY PS HB2 Rev1 PRODUCT SPECIFICATION Date 2010 05 07 1 4 3 5 Cells shall be charged per 4 1 1 at 23 C 2 C Temperature and discharged with 4A to 2 5V at the following Dependency of temperatures Capacity Charge Discharge Capacity 10 60 of Cini aes OC 80 of Cini 23 C 100 of Cini 60 95 of Cini 4 4 Mechanical Specification Item Condition Specification 4 4 1 Cells charged per 4 1 1 are dropped onto an oak board No leakage Drop Test from 1 meter height for 1 cycle 2 drops from each cell No temperature rising terminal and 1 drop from side of cell Total number of drops 3 4 4 2 Cells charged per 4 1 1 are vibrated for 90 minutes per No leakage Vibration Test each of the three mutually perpendicular axes x y Z with total excursion of 0 8mm frequency of 10Hz to 55Hz and sweep of 1Hz change per minute 4 5 Safety Specification Item Condition Specification Cells are discharged per 4 1 2 then charged at constant 4 5 1 current of 3 times the max charge condition and Overcharge Test constant voltage of 4 2V while tapering the charge current Charging is continued for 7 hours Per UL1642 No explode No fire 4 5 2 Cells are charged per 4 1 1 and
3. the positive and External Short negative terminal is connected by a 100m amp 2 wire for 1 No explode No fire Circuiting Test hour Per UL1642 4 5 3 f Cells are discharged at constant current of 0 2C to Overdischarge Es f No explode No fire Taai 250 of the minimum capacity es 719 PRODUCT SPECIFICATION LG Chem CONFIDENTIAL Description Document No Date Rev Lithium Ion ICR18650 HB2 1500mAh BCY PS HB2 Rev1 2010 05 07 1 Cells are charged per 4 1 1 and heated in a circulating 4 5 4 air oven at a rate of 5 C per minute to 130 C At 130 C No explode No fire Heating Test oven is to remain for 10 minutes before test is discontinued Per UL1642 Cells charged per 4 1 1 are impacted with their 4 5 5 longitudinal axis parallel to the flat surface and D No explode No fire Impact Test perpendicular to the longitudinal axis of the 15 8mm diameter bar Per UL1642 isy Cells charged per 4 1 1 are crushed with their longitudinal axis parallel to the flat surface of the No explode No fire Crush Test crushing apparatus Per UL1642 5 Caution and Prohibition in Handling Warning for using the lithium ion rechargeable battery Mishandling of the battery may cause heat fire and deterioration in performance Be sure to observe the following Caution e When using the application equipped with the battery refer to the user s manual before usage e Please read the specif
4. ic charger manual before charging e Charge time should not be longer than specified in the manual e When the cell is not charged after long exposure to the charger discontinue charging e Battery must be charged at operating temperature range 0 45 C e Battery must be discharged at operating temperature range 20 60 e Please check the positive and negative direction before packing e When a lead plate or wire is connected to the cell for packing check out insulation not to short circuit e Battery must be stored separately e Battery must be stored in a dry area with low temperature for long term storage s Do not place the battery in direct sunlight or heat e Do not use the battery in high static energy environment where the protection device can be damaged e When rust or smell is detected on first use please return the product to the seller immediately e The battery must be away from children or pets e When cell life span shortens after long usage please exchange to new cells Prohibitions 8 9 PRODUCT SPECIFICATION LG Chem CONFIDENTIAL Description Document No Date Rev Lithium Ion ICR18650 HB2 1500mAh BCY PS HB2 Rev1 2010 05 07 1 e Do not use different charger Do not use cigarette jacks in cars for charging e Do not charge with constant current more than maximum charge current e Do not disassemble or reconstruct the battery e Do not throw or cause impact e Do not pierce a hole in the batte
5. ls shall be charged per 6 1 and stored in a temperature controlled environment at 23 C 2 C for 30 days After storage cells shall be discharged per 6 2 to obtain the remaining capacity Capacity remaining rate 90 Cini in 2 1 4 3 2 High Temperature Cells shall be charged per 4 1 1 and stored in a temperature controlled environment at 60 C for No leakage Capacity recovery rate High Temperature and High Humidity Test 95 RH for 168 hours After test cells are discharged per 4 1 2 and cycled per 4 1 3 for 3 cycles to obtain recovered capacity Storage Test 1 week After storage cells shall be discharged 80 per 4 1 2 and cycled per 4 1 3 for 3 cycles to obtain recovered capacity 4 3 3 Cells are charged per 4 1 1 and stored at 60 C No leakage No rust Capacity recovery rate 80 4 3 4 Thermal Shock Test 65 C 8h 3hrs 20 C 8h for 8 cycles with cells charged per 4 1 1 After test cells are discharged per 4 1 2 and cycled per 4 1 3 for 3 cycles to obtain recovered capacity No leakage Capacity recovery rate 80 Remaining Capacity After storage cells shall be discharged with Std condition 4 1 2 to measure the remaining capacity Recovery Capacity After storage cells shall be discharged with fast discharge condition 4 1 3 and then cells shall be charged with std charge condition 4 1 1 and then discharged with Std condition 4 1 2
6. minated when the charging current has tapered to 50mA For test purposes charging shall be performed at 23 C 2 C 4 1 2 Standard Discharge Standard Discharge shall consist of discharging at a constant current of 300mA to 2 5V Discharging is to be performed at 23 C 2 C unless otherwise noted such as capacity versus temperature 4 1 3 Fast Charge discharge condition Cells shall be charged at constant current of 4000mA to 4 2V with end current of 100mA Cells shall be discharged at constant current of 10000mA to 2 5V Cells are to rest 10 minutes after charge and 20 minutes after discharge 5 9 LG Chem Lithium Ion ICR18650 HB2 1500mAh Description 4 2 Electrical Specification CONFIDENTIAL Document No BCY PS HB2 Rev1 PRODUCT SPECIFICATION Date 2010 05 07 1 Item Condition Specification 4 2 1 Cell shall be measured at 1kHz after charge per lt 20 m amp without PTC Initial AC Impedance 4 1 1 4 2 2 Cells shall be charged per 4 1 1 and discharged Cini 2 1400 mAh Cin Initial Capacity Cini per 4 1 2 within 1h after full charge 4 2 3 Cells shall be charged and discharged per 60 of Cmin in 2 1 Cycle Life 4 1 3 400 cycles A cycle is defined as one charge and one discharge 401st discharge capacity shall be measured per 4 1 1 and 4 1 2 4 3 Environmental specification Item Condition Specification 4 3 1 Storage Characteristics Cel
7. na aaa nana nagan a alas cadens anana anaa n anana nnmnnn 2 1 Capacity 2 2 Nominal Voltage 2 3 Standard Charge 2 4 Max Charge Current 2 5 Standard Discharge 2 6 Max Discharge Current 2 7 Weight 2 8 Operating Temperature 2 9 Storage Temperature for shipping state 3 Appearance and Dimension EEN 5 3 1 Appearance 3 2 Dimension 4 Performance Specification E 4 1 Standard Test Condition 4 2 Electrical Specification 4 3 Environmental Specification 4 4 Mechanical Specification 4 5 Safety Specification 5 Cautions and Prohibitions in Handling AANEREN 8 3 9 PRODUCT SPECIFICATION CONFIDENTIAL Document No Date Rev BCY PS HB2 Rev1 2010 05 07 1 8 ic Chem Lithium Ion ICR18650 HB2 1500mAh 1 General Information 1 1 Scope This product specification defines the requirements of the rechargeable lithium ion battery to be supplied to the Customer by LG Chem 1 2 Application Power Tools 1 3 Product classification Cylindrical rechargeable lithium ion battery 1 4 Model name ICR18650HB2 2 Nominal Specification Item Condition Note Specification Nominal 1500 mAh Chom 2 1 Capacity Std charge discharge Minimum 1400 mAh Cin 2 2 Nominal Voltage Average for Std discharge 3 65V 2 3 1 Standard Charge Constant current 750mA Refer to 4 1 1 Constant voltage 4 2V End condition Cut off 50mA 2 3 2 Fast charge Constant current 4000mA Refer to 4 1 3 Constant voltage 4 2V End c
8. ondition Cut off 100mA 2 4 Max Charge Voltage 4 2V 2 5 Max Charge Current 4000mA 2 6 1 Standard Discharge Constant current 300mA Refer to 4 1 2 End voltage Cut off 2 5V 2 6 2 Fast Discharge Constant current 10000mA Refer to 4 1 3 End voltage Cut off 2 5V 2 7 Max Discharge Current For continuous charge 30000mA 2 8 Weight Approx 48 0g 2 9 Operating Temperature Charge 0 45 C Discharge 20 60 2 10 Storage Temperature 1 month 20 60 for shipping state 3 month 20 ABC 1 year 20 20 Shipping state About 50 capacity of fully charged state 4 9 PRODUCT SPECIFICATION LG Chem CONFIDENTIAL Description Document No Date Rev Lithium Ion ICR18650 HB2 1500mAh BCY PS HB2 Revi 2010 05 07 1 3 Appearance and Dimension 3 1 Appearance There shall be no such defects as deep scratch crack rust discoloration or leakage which may adversely affect the commercial value of the cell 3 2 Dimension Diameter S 18 3 0 1 0 3 mm Max 18 4 mm Diameter is defined as the largest data value measured on the A area of a cylindrical cell Height 65 0 0 2mm_ Max 65 2 mm A Max 18 4 mm 4 Performance Specification 4 1 Standard test condition 4 1 1 Standard Charge Unless otherwise specified Standard Charge shall consist of charging at constant current of 750mA The cell shall then be charged at constant voltage of 4 2V while tapering the charge current Charging shall be ter
9. ry with sharp things such as nail knife pencil drill e Do not use with other batteries or cells e Do not solder on battery directly e Do not press the battery with overload in manufacturing process especially ultrasonic welding e Do not use old and new cells together for packing e Do not expose the battery to high heat such as fire Do not put the battery into a microwave or high pressure container e Do not use the battery reversed e Do not connect positive and negative with conductive materials such as metal wire e Do not allow the battery to be immerged in or wetted with water or sea water 9 9
Download Pdf Manuals
Related Search