BC430/820 Mains-Power Adapter
Contents
1. mains system when not in use In case the power adapter is damaged or any damage is suspected disconnect from the mains system and have qualified service personnel inspect the Product before reconnecting to the mains system again To use 1 Connect the mains plug adapter to the universal power cord 2 Connect the cable to the Battery Charger Power Adapter 3 Connect the power plug adapter to the mains system 4 Connect the dc plug to the instrument For continuous operation and recording with the test tool keep the power adapter connected Consult the Fluke 430 Series Test Tool User Manual for safety information before making any measurements Always fully charge the test tool battery before storage Specifications Input Nominal input voltage 100 Vac to 240 Vac 10 Input CUPPEIN cc tevensniteessoxsyeasnanuae 0 35 A at max load Nominal input frequency 50 60 Hz 10 Mains INC aie ccetieceieavecrccecceatariens IEC 60320 1 type C14 Output Output voltage eee 18 Vdc 5 Output CORI cssincnccccedeccesscees 0 mA to 840 mA Output cable length 2m 6 5 ft Output COnnector ieccsevececceecescass ic 5 mm outer diameter per DIN45232 Output DOIN s eccewcsccccectectcennde Inner contact negative outer contact positive Physical characteristics Dimensions of main unit 79 mm x 149 mm x 49 mm Housing MALS scciecscuscctesceatewnns Heat resistant ABS Color hou2. LIMITED WARRANTY AND LIMITATION OF LIABILITY Each Fluke product is warranted to be free from defects in material and workmanship under normal use and service The warranty period is one year and begins on the date of shipment Parts product repairs and services are warranted for 90 days This warranty extends only to the original buyer or end user customer of a Fluke authorized reseller and does not apply to fuses disposable batteries or to any product which in Fluke s opinion has been misused altered neglected contaminated or damaged by accident or abnormal conditions of operation or handling Fluke warrants that software will operate substantially in accordance with its functional specifications for 90 days and that it has been properly recorded on non defective media Fluke does not warrant that software will be error free or operate without interruption Fluke authorized resellers shall extend this warranty on new and unused products to end user customers only but have no authority to extend a greater or different warranty on behalf of Fluke Warranty support is available only if product is purchased through a Fluke authorized sales outlet or Buyer has paid the applicable international price Fluke reserves the right to invoice Buyer for importation costs of repair replacement parts when product purchased in one country is submitted for repair in another country Fluke s warranty obligation is limited at Fluke s option to refund o
3. OSS OF DATA ARISING FROM ANY CAUSE OR THEORY Since some countries or states do not allow limitation of the term of an implied warranty or exclusion or limitation of incidental or consequential damages the limitations and exclusions of this warranty may not apply to every buyer If any provision of this Warranty is held invalid or unenforceable by a court or other decision maker of competent jurisdiction such holding will not affect the validity or enforceability of any other provision Fluke Corporation Fluke Europe B V P O Box 9090 P O Box 1186 Everett WA 98206 9090 5602 BD Eindhoven U S A The Netherlands 11 99 To register your product online visit register fluke com SERVICE CENTERS To locate an authorized service center visit http Awww fluke com Or call Fluke using any of the phone numbers listed below 1 888 993 5853 in U S A and Canada 31 40 2675200 in Europe 1 425 446 5500 from other countries BC430 820 Universal Mains Power Adapter Instruction Sheet Introduction The BC430 820 is a universal mains power adapter for measurement control and laboratory equipment The BC430 820 is intended for operating and charging the Fluke 430 Series ScopeMeter Test Tool The mains power adapter is based on the switched mode concept for high efficiency and low stand by power consumption It operates in a wide range of input voltages from 100 Vac up to 240 Vac nominal A universal mains cable and a set of mains plu
4. f the purchase price free of charge repair or replacement of a defective product which is returned to a Fluke authorized service center within the warranty period To obtain warranty service contact your nearest Fluke authorized service center to obtain return authorization information then send the product to that service center with a description of the difficulty postage and insurance prepaid FOB Destination Fluke assumes no risk for damage in transit Following warranty repair the product will be returned to Buyer transportation prepaid FOB Destination If Fluke determines that failure was caused by neglect misuse contamination alteration accident or abnormal condition of operation or handling including overvoltage failures caused by use outside the product s specified rating or normal wear and tear of mechanical components Fluke will provide an estimate of repair costs and obtain authorization before commencing the work Following repair the product will be returned to the Buyer transportation prepaid and the Buyer will be billed for the repair and return transportation charges FOB Shipping Point THIS WARRANTY IS BUYER S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE FLUKE SHALL NOT BE LIABLE FOR ANY SPECIAL INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES INCLUDING L
5. g adapters are included The adapter is suitable for most types of mains outlets htx03 eps BC430 820 Mains Power Adapter PN 4465879 February 2014 2014 Fluke Corporation Product specifications are subject to change without notice rights reserved 4822 872 30911 Unpack This universal mains power adapter consists of the following items e BC430 820 Switch Mode Power Adapter main unit with dc cable e Universal mains cord with male and female connector e Set of mains plug adapters 6 qty for all standard mains outlets e Brazilian style mains cord adapter 0 25 m 10 inch approximate At delivery of the BC430 820 make sure that the set is complete and all items are undamaged Contact your supplier if you see any damage Operation AA Warning To prevent electrical shock fire or personal injury e Read these instructions carefully before using the Product e Use the Product only with Fluke test tools that have the type number BC430 specified for charge and operation e Use this Product only as specified e Do not open the Product it has no user serviceable parts inside e Do not use the Product around explosive gas vapor or in damp or wet environments The power cord connects the Product to the mains system Do not block access to the power cord and power plug these must remain accessible to the user at all times The Product is not equipped with a power switch Disconnect the mains plug from the
6. old waste Product Category With reference to the equipment types in the WEEE Directive Annex l this product is classed as category 9 Monitoring and Control Instrumentation product Do not dispose of this product as unsorted municipal waste Go to Fluke s website for recycling information x O le Conforms to relevant South Korean EMC Standards Conforms to relevant North American Safety Standards
7. sing and cable Black WY IGM sisdiinatunuetinaiusaamoahacaabakdanntnns 0 35 kg IP Rating xctncosetcesncautaadveadceettecises IEC 60529 IP40 Environmental Operating temperature 0 C to 50 C 32 F to 122 F up to 90 rel humidity no condensation Storage temperature 40 C to 70 C 10 to 95 rel humidity Max GUUS ssascathccccusassstadengnnance 2000 m 6562 ft above sea level Included accessories Power COM recap ccc ccecasssantiedessniaces Universal cord with set of power plugs Universal Mains cord Length 1 5 m 5 ft male to female Power plug adapters INCI eea US style UK style European Schuko Chinese Australian Italian Swiss Brazilian adapter cord General Safety approval cceseseeeeeees 600 V CAT IV acc IEC EN61010 1 for Measurement Control and Laboratory use EMC compatibility c cccncecccecccncwcees EN 61326 1 FCC 47 CFR 15 Symbols International electrical symbols used on the Product and in this document are explained below Double Insulated A Risk of danger Important information DC Direct Current Hazardous voltage Risk of electrical shock gt ON AN Conformit Europ enne Energy Efficiency level V This product complies with the WEEE Directive 2002 96 EC marking requirements The affixed label indicates that you must not discard this electrical electronic product in domestic househ
Download Pdf Manuals
Related Search