Home

View - Magnaflow

image

Contents

1. MAG LO Mufflers Converters Systems and Tips PRODUCTS 2011 Ford F Series 6 7L Diesel 3X 4 00 CLAMPS hie INLET PIPE PS EXTENSION PIPE MUFFLER ASSY TAIL PIPE ASSY Magnaflow Performance Exhaust recommends professional installation on all their products Nov 25 2013 INSTALLATION INSTRUCTIONS 15506 Warning When working on under or around any vehicle exercise caution Please allow the vehicle s exhaust system to cool before removal as exhaust system temperatures may cause severe burns If working without a lift always consult vehicle manual for correct lifting specifications Always wear safety glasses and ensure a safe work area Serious injury or death could occur if safety measures are not followed Step 1 First un bolt the OEM exhaust from the catalytic converter at the 3 bolt flange You can now disengage the welded hangers from the rubber insulators and remove the exhaust system from the vehicle Do not damage the OEM rubber insulators as they will be reused to mount the new system You may also cut the tailpipe behind the muffler to aid in removal of the system Step 2 Install the flanged inlet pipe to the catalytic converter outlet Crew Cab and Long Bed CC LB models require the 19 Extension Pipe shorter vehicles will now use the Muffler Assembly and appropriate clamps Leave all clamps loose for final adjustment of the complete system Install the Tail Pipe Assembly in a simil
2. ar fashion using the supplied 4 00 clamp and by fitting the welded hangers into the rubber insulators Step 3 With all components mounted loosely adjust the system for overall aesthetics and clearance of frame amp bodywork MAGNAFLOW recommends at least 1 2 of clearance between the exhaust system and any body panels to prevent heat related body damage or fire Step 4 Once a final position has been chosen for the new system evenly tighten all fasteners from front to rear The supplied band clamps must be VERY tight to properly align the pipes and prevent leaks Approximately 40ft Ibs U bolt clamps should be tightened to approximately 30 35ft lbs Inspect all fasteners after 25 50 miles of operation and retighten if necessary Magnaflow Performance Exhaust 22961 Arroyo Vista Rancho Santa Margarita CA 92688 Rev 001 Main 1 800 990 0905 Technical Support 1 800 959 9226 ext 4500

Download Pdf Manuals

image

Related Search

Related Contents

  500524 - 01 - Manual termostato de ambiente inalambrico  EC 214 - Hanna Instruments Canada  Capri S  

Copyright © All rights reserved.
Failed to retrieve file