DMON-16S HARDWARE MANUAL FIRMWARE V1.3
Contents
1. 1 to 16 Channel 3G HD SD SDI Multi Viewer with SDI and HDMI outputs Operating Manual for Firmware Version 1 3 Introduction Thank you for purchasing the DMON 16S 16 Channel 3G HD SD SDI Multi Viewer with HDMI and SDI outputs The DMON 16S is a truly portable converter which incorporates our new easy to use LCD and button control system This gives you easy access to most of the amazing features that have been unavailable without a computer until now The days of having to play with complicated dip switches or having to carry around a computer to change a simple setting are gone The DMON 16S features the following Low cost miniature 3G HD SD SDI 1 to 16 channel Multi Viewer or 16 to 1 input multiplexer Custom Layouts with various standard layouts 16 Character UMD overlay per window with individual enables custom positioning and size 8 Channel Audio Metering overlay per window with individual enables custom positioning and size Safe Action and Safe Title overlay per window with individual enables and adjustment Centre Cross overlay per window with individual enable Audio ID overlay Tallies can be applied to either Tally Boxes Default Outside Safe Action Area or Border Tally boxes allows for up to 4 Tallies per window with Tally Boxes Green Red Blue and Yellow Load and restore Custom Layouts Fast switching between inputs using Full Screen scaling Selectable output format in both Full Screen and Multi Viewer mode Low latency2. 18 Black Transparent 0 8 Colours Safe Action Parameter This is the Safe Action graticule colour and transparency setting When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right through the following colours 1 None 10 Black Transparent 25 19 Blue Transparent 0 2 Black Transparent 50 11 Blue Transparent 25 20 Green Transparent 0 3 Blue Transparent 50 12 Green Transparent 25 21 Cyan Transparent 0 4 Green Transparent 50 13 Cyan Transparent 25 22 Red Transparent 0 5 Cyan Transparent 50 14 Red Transparent 25 23 Magenta Transparent 0 6 Red Transparent 50 15 Magenta Transparent 25 24 Yellow Transparent 0 7 Magenta Transparent 50 16 Yellow Transparent 25 25 White Transparent 0 8 Yellow Transparent 50 9 White Transparent 50 18 Black Transparent 0 9 Colours Safe Title Parameter This is the Safe Title graticule colour and transparency setting When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right through the following colours None 10 Black Transparent 25 19 Blue Transparent 0 Black Transparent 50 11 Blue Transparent 25 20 Green Transparent 0 Blue Transparent 50 12 Green Transparent 25 21 Cya
3. 22 Red Transparent 0 23 Magenta Transparent 0 6 Red Transparent 50 15 Magenta Transparent 25 24 Yellow Transparent 0 7 Magenta Transparent 50 16 Yellow Transparent 25 25 White Transparent 0 8 Yellow Transparent 50 17 White Transparent 25 9 White Transparent 50 18 Black Transparent 0 DMON 16S Hardware Manual for Firmware Version 1 3 Copyright 2015 Decimator Design Pty Ltd Sydney Australia E amp OE 7 Colours Outside S Action Parameter This is the Colour and transparency setting for the area outside the safe action When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right through the following colours 10 Black Transparent 25 19 Blue Transparent 0 2 Black Transparent 50 11 Blue Transparent 25 20 Green Transparent 0 3 Blue Transparent 50 12 Green Transparent 25 21 Cyan Transparent 0 4 Green Transparent 50 13 Cyan Transparent 25 22 Red Transparent 0 5 Cyan Transparent 50 14 Red Transparent 25 23 Magenta Transparent 0 6 Red Transparent 50 15 Magenta Transparent 25 24 Yellow Transparent 0 7 Magenta Transparent 50 16 Yellow Transparent 25 25 White Transparent 0 8 Yellow Transparent 50 17 White Transparent 25 9 White Transparent 50
4. 8 Yellow Transparent 50 9 White Transparent 50 18 Black Transparent 0 UMDs Has SUB MENUs UMDs Main Menu Sub Menu Parameter Window When highlighted in the Main Menu press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right respectively through the 3 menus below and press the BACK button to go back to the Main Menu when finished The current value for each Sub Menu is shown in the Parameter Window unless it is an action Sub Menu 1 UMDs All On Action Pressing ENTER when this submenu is selected will turn all UMD overlays on 2 UMDs All Off Action Pressing ENTER when this submenu is selected will turn all UMD overlays off 3 UMDs UMD Justify Parameter This parameter determines whether the text inside the 16 character window is centred left or right justified When the sub menu is highlighted press ENTER to toggle through the following options 2 Left 3 Right Audio Meters Has SUB MENUs Audio Meters Main Menu Sub Menu Parameter Window When highlighted in the Main Menu press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right respectively through the 11 menus below and press the BACK button to go back to the Main Menu when finished The current value for each Sub Menu is shown in the Parameter Window 1 Audio Meters All On Action Pressing ENTER
5. After pressing ENTER three times 13 SD 576i50 14 HD 720p24 15 SD 480i59 94 163GB 1080p59 94 Current format on SDI Input 13 Current format on SDI Input 14 Current format on SDI Input 15 Current format on SDI Input 16 DMON 16S Hardware Manual for Firmware Version 1 3 2 Copyright 2015 Decimator Design Pty Ltd Sydney Australia E amp OE Control Has SUB MENUs Control lt Main Menu lt Sub Menu HDMI RGB444 2C Parameter Window When highlighted in the Main Menu press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right respectively through the 13 menus below and press the BACK button to go back to the Main Menu when finished The current value for each Sub Menu is shown in the Parameter Window 1 Control HDMI Output Type Parameter This is the current HDMI output type for output 1 When the sub menu is highlighted press ENTER to toggle through the following types 1 DVI RGB444 lt DVI D RGB 4 4 4 2 HDMIRGB4442C HDMI RGB 4 4 4 with 2 Channels of Audio 3 HDMI YCbCr444 2C lt HDMI YCbCr 4 4 4 with 2 Channels of Audio 4 HDMI YCbCr422 2C lt HDMI YCbCr 4 2 2 with 2 Channels of Audio 5 HDMI RGB444 8C lt HDMI RGB 4 4 4 with 8 Channels of Audio 6 HDMI YCbCr444 8C lt HDMI YCbCr 4 4 4 with 8 Channels of Audio 7 HDMI YCbCr422 8C lt HDMI YCbCr 4 2 2 with 8 Channels of Audio 2 Control Output Selec
6. PIN 24 Window 6 Tally Green PIN 37 Output Select Toggle PIN 12 Window 3 Tally Red PIN 25 Window 8 Tally Green PIN 13 Window 5 Tally Red PIN 26 Window 10 Tally Green DMON 16S Hardware Manual for Firmware Version 1 3 Copyright 2015 Decimator Design Pty Ltd Sydney Australia E amp OE 13 GPI Mode 02 PIN 1 Ground PIN 14 Window 9 Select PIN 27 Window 12 Tally Green PIN 2 RS485 PIN 15 Window 11 Select PIN 28 Window 14 Tally Green PIN 3 Window 1 Tally Green PIN 16 Window 13 Select PIN 29 Window 2 Select PIN 4 Window 3 Tally Green PIN 17 Window 15 Select PIN 30 Window 4 Select PIN 5 Window 5 Tally Green PIN 18 Multi View Select PIN 31 Window 6 Select PIN 6 Window 7 Tally Green PIN 7 Window 9 Tally Green PIN 8 Window 11 Tally Green PIN 19 Ground PIN 20 Ground PIN 21 RS485 PIN 32 Window 8 Select PIN 33 Window 10 Select PIN 34 Window 12 Select PIN 9 Window 13 Tally Green PIN 22 Window 2 Tally Green PIN 35 Window 14 Select PIN 10 Window 1 Select PIN 23 Window 4 Tally Green PIN 36 Window 16 Select PIN 11 Window 3 Select PIN 24 Window 6 Tally Green PIN 37 Output Select Toggle PIN 12 Window 5 Select PIN 25 Window 8 Tally Green PIN 13 Window 7 Select PIN 26 Window 10 Tally Green Setup Has SUB MENUs
7. 16 9 LB Action Pressing ENTER when this submenu is selected will set all Safe Action and Safe Tile Graticules to 16 9 Letter Box on a 4 3 Raster For use with 16 9 and HD SD inputs being displayed on a 4 3 SD output 9 Graticules All 4 3 PB Action Pressing ENTER when this submenu is selected will set all Safe Action and Safe Tile Graticules to 4 3 Letter Box on a 16 9 Raster For use with 4 3 SD inputs being displayed on a 16 9 HD SD output GPI Has SUB MENUs GPI lt Main Menu lt Sub Menu 00 lt Parameter Window When highlighted in the Main Menu press the ENTER button to enter this sub menu When the sub menu is highlighted press ENTER to toggle through the Modes and press the BACK button to go back to the Main Menu when finished The current value for each Sub Menu is shown in the Parameter Window GPI Mode 00 PIN 1 Ground PIN 14 Window 7 Tally Red PIN 27 Window 12 Tally Green PIN 2 RS485 PIN 15 Window 9 Tally Red PIN 28 Window 14 Tally Green PIN 3 Window 1 Tally Green PIN 16 Window 11 Tally Red PIN 29 Window 16 Tally Green PIN 4 Window 3 Tally Green PIN 17 Window 13 Tally Red PIN 30 Window 2 Tally Red PIN 5 Window 5 Tally Green PIN 18 Window 15 Tally Red PIN 31 Window 4 Tally Red PIN 6 Window 7 Tally Green PIN 19 Ground PIN 32 Window 6 Tally Red PIN 7 Window 9 Tally Green PIN 20 Ground PIN 33 Window 8 Tal
8. Setup lt Main Menu lt Sub Menu lt Parameter Window When highlighted in the Main Menu press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right respectively through the 6 menus below and press the BACK button to go back to the Main Menu when finished The current value for each Sub Menu is shown in the Parameter Window unless it is an action Sub Menu 1 SETUP LOAD DEFAULTS Action When highlighted in the Menu Window press the ENTER button to load the default settings The device will be reset to the Main Menu Input Status 2 SETUP LCD OFF TIME Parameter This is the time taken for the LCD light to turn off after the last button press When the sub menu is highlighted press ENTER to toggle through the following times 1 5 seconds 2 15 seconds 3 30 seconds 4 1 minute 5 5 minutes 6 10 minutes 7 30 minutes 3 SETUP BACK2STATUS TIME Parameter This is the time before the main menu is returned to Input Status after the last button press When the sub menu is highlighted press ENTER to toggle through the following times 1 5 seconds 2 15 seconds 3 30 seconds 4 1 minute 5 5 minutes 6 10 minutes 7 30 minutes DMON 16S Hardware Manual for Firmware Version 1 3 Copyright 2015 Decimator Design Pty Ltd Sydney Australia E amp OE 14 4 SETUP AUTO SAVE Parameter This parameter will determine if any changes will be
9. buffering for each input allowing non synchronous inputs Linked 3G HD SD SDI and HDMI outputs 16 x 3G HD SD SDI inputs with auto detection 26 Formats supported in total Supports both 3G level A and B on the input and output Each window is independent of the others allowing any 3G HD SD format of any frame rate to be displayed simultaneously Variable aspect ratios per window Pass Through mode allowing any of the 16 inputs to be selected for output In Pass Through mode the selected input is passed through to both the 3G HD SD SDI and HDMI outputs The DMON 16S is a truly portable converter that incorporates our new easy to use LCD and button control system This gives you easy access to most of the amazing features without using complicated LED button control dip switches or having to carry around a computer to change a simple setting This unit also includes 32 GPI on 37 pin D SUB connector for Dynamic Tallies and Remote Switching RS422 485 on 37 pin D SUB connector for Dynamic UMD and Tallies via TSL protocol USB port for control and firmware updates Heavy duty metal box Metal Thread Locking DC Power Socket Power Supply HDMI Cable and USB Cable DMON 16S Hardware Manual for Firmware Version 1 3 1 Copyright 2015 Decimator Design Pty Ltd Sydney Australia E amp OE Main Menus Upon power up the unit will start in the Main Menu pointing to Input Status The Main Menus are Input Status Control Routing Colour
10. order to service under this warranty you the Customer must notify Decimator Design of the defect before the expiration of the warranty period and make suitable arrangements for the performance of service The Customer shall be responsible for packaging and shipping the defective product to a designated service centre nominated by Decimator Design with shipping charges prepaid Decimator Design shall pay for the return of the product to the Customer if the shipment is to a location within the country in which the Decimator Design service centre is located The Customer shall be responsible for paying all shipping charges insurance duties taxes and any other charges for products returned to any other location This warranty shall not apply to any defect failure or damage caused by improper use or improper or inadequate maintenance and care Decimator Design shall not be obligated to furnish service under this warranty a to repair damage resulting from attempts by personnel other than Decimator Design representatives to install repair or service the product b to repair damage resulting from improper use or connection to incompatible equipment c to repair any damage or malfunction caused by the use of non Decimator Design parts or supplies or d to service a product that has been modified or integrated with other products when the effect of such a modification or integration increases the time of difficulty of servicing the product DMON 16S Ha
11. saved to memory when changes are made When the sub menu is highlighted press ENTER to toggle through the following selections 2 No 5 SETUP Demo Cycle Parameter The Demo cycle setting is used for cycling through multiple layouts windows or inputs on a time delay When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right through the following cycle types 2 Output Select 3 MV Windows 4 MV Layouts Note The parameter will only be updated when leaving this sub menu 6 SETUP Demo Cycle Time Parameter The Demo Cycle Time determines the amount of time to elapse before cycling to the next item When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right through the time until the unit moves to the next item in the cycle Default time is 10 Seconds Maximum time is 256 Seconds Note The parameter will only be updated when leaving this sub menu SERVICE WARRANTY Decimator Design warrants that this product will be free from defects in materials and workmanship for a period of 36 months from the date of purchase If this product proves to be defective within this warranty period Decimator Design at its discretion will either repair the defective product without charge for parts and labour or will provide a replacement product in exchange for the defective product In
12. selections 2 IEC1 3 IEC2 8 Audio Meter Float Ballistics Parameter This is the current ballistics applied to the float audio meter When the sub menu is highlighted press ENTER to toggle through the following selections 1 VU 2 IEC1 DMON 16S Hardware Manual for Firmware Version 1 3 11 Copyright 2015 Decimator Design Pty Ltd Sydney Australia E amp OE 9 Audio Meter Ref Level Parameter This is the current audio reference level for the audio meter overlays When the sub menu is highlighted press ENTER to toggle through the following selections 2 18 dBFS 3 15 dBFS 10 Audio Meter Yellow Start Has SUB MENU with parameter This is the starting level for the yellow range on the audio meter The default value is 10dBFS When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to increase and decrease the level from 0 to 100dBFS respectively Press the BACK button to leave this SUB MENU 11 Audio Meter Green Start Has SUB MENU with parameter This is the starting level for the green range on the audio meter The default value is 20dBFS When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to increase and decrease the level from 0 to 100dBFS respectively Press the BACK button to leave this SUB MENU Graticules Has SUB MENUs Graticules Main Menu Sub Menu Paramete
13. when this submenu is selected will turn all Audio Meter overlays on DMON 16S Hardware Manual for Firmware Version 1 3 10 Copyright 2015 Decimator Design Pty Ltd Sydney Australia E amp OE 2 Audio Meters All Off Action Pressing ENTER when this submenu is selected will turn all Audio Meter overlays off 3 Audio Meter Combination Parameter This is the combination of either bar or float meters When the sub menu is highlighted press ENTER to toggle through the following selections 1 None 2 Bar Only 3 Float Only 4 Audio Meter Transparency Parameter This is the transparency level of the audio meter overlays When the sub menu is highlighted press ENTER to toggle through the following selections 2 25 3 50 5 Audio Meter Show Scale Parameter This indicates if the scale is shown on the audio meter overlays When the sub menu is highlighted press ENTER to toggle through the following selections 1 Off 6 Audio Meter Meter Scale Parameter This is the current scale shown on the audio meter overlays When the sub menu is highlighted press ENTER to toggle through the following selections 1 AES EBU 2 VU 3 Extended VU 4 BBC PPM IEC 2a 5 EBU PPM IEC 2b 6 DIN PPM IEC 1a 7 NORDIC IEC 1b 7 Audio Meter Bar Ballistics Parameter This is the current ballistics applied to the bar audio meter When the sub menu is highlighted press ENTER to toggle through the following
14. 0 7 Magenta Transparent 50 16 Yellow Transparent 25 25 White Transparent 0 8 Yellow Transparent 50 17 White Transparent 25 9 White Transparent 50 18 Black Transparent 0 DMON 16S Hardware Manual for Firmware Version 1 3 7 Copyright 2015 Decimator Design Pty Ltd Sydney Australia E amp OE 4 Colours UMD Background Parameter This is the UMD colour and transparency setting for the background of the UMDs When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right through the following colours None Black Transparent 50 Blue Transparent 50 10 Black Transparent 25 11 Blue Transparent 25 12 Green Transparent 25 19 Blue Transparent 0 20 Green Transparent 0 21 Cyan Transparent 0 Green Transparent 50 13 Cyan Transparent 25 22 Red Transparent 0 Cyan Transparent 50 14 Red Transparent 25 23 Magenta Transparent 0 Red Transparent 50 Magenta Transparent 50 Yellow Transparent 50 15 Magenta Transparent 25 17 White Transparent 25 24 Yellow Transparent 0 25 White Transparent 0 White Transparent 50 18 Black Transparent 0 5 Colours Format ForeGrnd Parameter This is the Status Format text colour and transparency setting When the sub menu is highlighted press the
15. ENTER button to enter this sub menu Press the lt and gt buttons to move left or right through the following colours None 10 Black Transparent 25 19 Blue Transparent 0 Black Transparent 50 11 Blue Transparent 25 20 Green Transparent 0 Blue Transparent 50 Green Transparent 50 12 Green Transparent 25 13 Cyan Transparent 25 21 Cyan Transparent 0 22 Red Transparent 0 Cyan Transparent 50 14 Red Transparent 25 23 Magenta Transparent 0 Red Transparent 50 15 Magenta Transparent 25 24 Yellow Transparent 0 Magenta Transparent 50 Yellow Transparent 50 W COOIN D MB Wl NM e White Transparent 50 16 Yellow Transparent 25 18 Black Transparent 0 25 White Transparent 0 6 Colours Format BackGrnd Parameter This is the Status Format text background colour and transparency setting When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right through the following colours 1 None 3 Blue Transparent 50 4 Green Transparent 50 5 Cyan Transparent 50 10 Black Transparent 25 11 Blue Transparent 25 19 Blue Transparent 0 20 Green Transparent 0 12 Green Transparent 25 13 Cyan Transparent 25 14 Red Transparent 25 21 Cyan Transparent 0
16. ach Sub Menu is shown in the Parameter Window 1 Colours Background Colour Parameter This is background colour for the Multi Viewer When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right through the following colours 1 Black 2 Blue 3 Green 4 Cyan 5 Red 6 Magenta 7 Yellow 8 White 2 Colours Border Colour Parameter This is border colour for the Multi Viewer When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right through the following colours 1 Black 2 Blue 3 Green 4 Cyan 5 Red 6 Magenta 7 Yellow 8 White 3 Colours UMD Foreground Parameter This is the UMD colour and transparency setting for the text When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right through the following colours 1 None 10 Black Transparent 25 19 Blue Transparent 0 11 Blue Transparent 25 20 Green Transparent 0 3 Blue Transparent 50 12 Green Transparent 25 21 Cyan Transparent 0 4 Green Transparent 50 13 Cyan Transparent 25 22 Red Transparent 0 5 Cyan Transparent 50 14 Red Transparent 25 23 Magenta Transparent 0 6 Red Transparent 50 15 Magenta Transparent 25 24 Yellow Transparent
17. ce Identification icon will appear when selecting which window the audio will be passed from to the output when in multi viewer mode This option toggles whether the icon is shown to indicate the window source the audio is coming from This icon appears in front of the Format Status When the sub menu is highlighted press ENTER to toggle through the following selections 2 Show Always 3 Off 11 Control Apply Tally to Parameter The Apply tally to parameter allows the selection of the 3 different types of tally indicators When a tally is triggered it can be displayed as a small box on the bottom left default position of the inputs window or as border around the window The Tally can also fill the outside of the safe action box When the sub menu is highlighted press ENTER to toggle through the following selections 1 Border 2 Out Safe Action DMON 16S Hardware Manual for Firmware Version 1 3 5 Copyright 2015 Decimator Design Pty Ltd Sydney Australia E amp OE 12 Control Tally Transparency Parameter The Tally transparency feature changes the transparency of the tally box border Outside safe Action When the sub menu is highlighted press ENTER to toggle through the following selections 1 0 3 50 13 Control 3G Output is B Parameter This determines if the 3G SDI output level is B instead of A When the sub menu is highlighted press ENTER to toggle through the following selections 1 Yes 2 N
18. ly Red PIN 8 Window 11 Tally Green PIN 21 RS485 PIN 34 Window 10 Tally Red PIN 9 Window 13 Tally Green PIN 22 Window 2 Tally Green PIN 35 Window 12 Tally Red PIN 10 Window 15 Tally Green PIN 23 Window 4 Tally Green PIN 36 Window 14 Tally Red PIN 11 Window 1 Tally Red PIN 24 Window 6 Tally Green PIN 37 Window 16 Tally Red PIN 12 Window 3 Tally Red PIN 25 Window 8 Tally Green PIN 13 Window 5 Tally Red PIN 26 Window 10 Tally Green GPI Mode 01 PIN 1 Ground PIN 14 Window 7 Tally Red PIN 27 Window 12 Tally Green PIN 2 RS485 PIN 15 Window 9 Tally Red PIN 28 Window 14 Tally Green PIN 3 Window 1 Tally Green PIN 16 Window 11 Tally Red PIN 29 Window 16 Tally Green PIN 4 Window 3 Tally Green PIN 17 Window 13 Tally Red PIN 30 Window 2 Tally Red PIN 5 Window 5 Tally Green PIN 18 Window 15 Tally Red PIN 31 Window 4 Tally Red PIN 6 Window 7 Tally Green PIN 19 Ground PIN 32 Window 6 Tally Red PIN 7 Window 9 Tally Green PIN 20 Ground PIN 33 Window 8 Tally Red PIN 8 Window 11 Tally Green PIN 21 RS485 PIN 34 Window 10 Tally Red PIN 9 Window 13 Tally Green PIN 22 Window 2 Tally Green PIN 35 Window 12 Tally Red PIN 10 Window 15 Tally Green PIN 23 Window 4 Tally Green PIN 36 Window 14 Tally Red PIN 11 Window 1 Tally Red
19. n Transparent 0 Green Transparent 50 13 Cyan Transparent 25 22 Red Transparent 0 Cyan Transparent 50 14 Red Transparent 25 23 Magenta Transparent 0 Red Transparent 50 15 Magenta Transparent 25 24 Yellow Transparent 0 Magenta Transparent 50 Yellow Transparent 50 White Transparent 50 16 Yellow Transparent 25 18 Black Transparent 0 25 White Transparent 0 DMON 16S Hardware Manual for Firmware Version 1 3 Copyright 2015 Decimator Design Pty Ltd Sydney Australia E amp OE 10 Colours Centre Cross Parameter This is the Centre Cross colour and transparency setting When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right through the following colours 1 None 10 Black Transparent 25 19 Blue Transparent 0 2 Black Transparent 50 11 Blue Transparent 25 20 Green Transparent 0 3 Blue Transparent 50 12 Green Transparent 25 21 Cyan Transparent 0 4 Green Transparent 50 13 Cyan Transparent 25 22 Red Transparent 0 5 Cyan Transparent 50 14 Red Transparent 25 23 Magenta Transparent 0 6 Red Transparent 50 15 Magenta Transparent 25 24 Yellow Transparent 0 7 Magenta Transparent 50 16 Yellow Transparent 25 25 White Transparent 0
20. o Routing Has SUB MENUs Routing Main Menu Sub Menu Input 1 lt Parameter Window When highlighted in the Main Menu press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right respectively through the 16 menus below and press the BACK button to go back to the Main Menu when finished The current value for each Sub Menu is shown in the Parameter Window 1 Routing Window 1 Source Parameter This is the input source for Window 1 When the sub menu is highlighted press the ENTER button to enter the Parameter Window Press the lt and gt buttons to move left or right through the following sources 1 Input 1 2 Input 2 3 Input 3 4 Input 4 5 Input 5 6 Input 6 7 Input 7 8 Input 8 9 Input 9 10 Input 10 11 Input 11 12 Input 12 13 Input 13 14 Input 14 15 Input 15 16 Input 16 Please note that Windows 2 to 16 sources are the same as above DMON 16S Hardware Manual for Firmware Version 1 3 6 Copyright 2015 Decimator Design Pty Ltd Sydney Australia E amp OE Colours Has SUB MENUs Colours lt Main Menu Sub Menu Black Parameter Window When highlighted in the Main Menu press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right respectively through the 10 menus below and press the BACK button to go back to the Main Menu when finished The current value for e
21. psf24 18 HD 1280x720p50 Note Currently we do not support HD 1280x720p24 23 98 on the HDMI output 4 Control MV Windows Parameter This is the current number of windows shown on the multi view output When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right through the number of windows displayed from 1 to 16 Default Windows displayed is 16 windows 5 Control MV Layout Parameter This is the current layout of the multi viewer there are 32 layouts selectable per format and multi viewer window number 10 of these are predefined layouts When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right through the following layouts 2 100 with Border 3 90 4 90 with Border 5 100 with Gap 6 100 with Border Gap 7 90 with Gap 8 90 with Border Gap 9 to 30 Custom 31 Top to Bottom 32 Left to Right Notes For every Format and Number of Windows there are 32 layouts E g for a 1920x1080i60 format showing 12 windows there are 32 layouts tied to this output if the number of windows is changed to 11 there are also 32 separate layouts attached to this setting Full Screen Pass through will also use the selected layout for 1 window 6 Control MV Audio Source Parameter This selects which window the audio is extracted from for the Multi Viewer o
22. r Window When highlighted in the Main Menu press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right respectively through the 9 menus below and press the BACK button to go back to the Main Menu when finished The current value for each Sub Menu is shown in the Parameter Window unless it is an action Sub Menu 1 Graticules S Action All On Action Pressing ENTER when this submenu is selected will turn all Safe Action Graticules overlays on 2 Graticules S Title All On Action Pressing ENTER when this submenu is selected will turn all Safe Title Graticules overlays on 3 Graticules C Cross All On Action Pressing ENTER when this submenu is selected will turn all Centre Cross overlays on 4 Graticules S Action All Off Action Pressing ENTER when this submenu is selected will turn all Safe Action Graticules overlays off 5 Graticules S Title All Off Action Pressing ENTER when this submenu is selected will turn all Safe Title Graticules overlays off 6 Graticules C Cross All Off Action Pressing ENTER when this submenu is selected will turn all Centre Cross overlays off 7 Graticules All Anamorphic Action Pressing ENTER when this submenu is selected will set all Safe Action and Safe Tile Graticules to anamorphic DMON 16S Hardware Manual for Firmware Version 1 3 12 Copyright 2015 Decimator Design Pty Ltd Sydney Australia E amp OE 8 Graticules All
23. rdware Manual for Firmware Version 1 3 15 Copyright 2015 Decimator Design Pty Ltd Sydney Australia E amp OE
24. s UMDs Audio Meters Graticules GPI Setup Press the lt and gt buttons to move left or right through the menus To enter into a menu press the ENTER button WON AM AWNE Notes 1 Defaults are highlighted in yellow 2 When an option is changed a highlighted will appear in the top right of the LCD screen and will disappear when the options are saved after 10 seconds Avoid powering down the unit during this time 3 You can always return to the Main Menu by pressing the BACK button twice 4 As you move through the menus changing parameters they will be instantly applied to the output signal Input Status Has 4 states When pressing enter in the Input Status menu will cycle between the status for input 1 4 5 8 and 9 12 Default 1 3GA 1080p59 94 Current format on SDI Input 1 2 HD 720p50 Current format on SDI Input 2 3 SD 480i59 94 4 HD 1080i59 94 After pressing ENTER once 5 3GA 1080p60 6 3GB 1080p50 7 3GA 1080p60 8 3GB 1080p59 94 Current format on SDI Input 3 Current format on SDI Input 4 Current format on SDI Input 5 Current format on SDI Input 6 Current format on SDI Input 7 Current format on SDI Input 8 After pressing ENTER twice 9 HD 1080p24 10 HD 720p50 11 SD 480i59 94 12 HD 1080i59 94 Current format on SDI Input 9 Current format on SDI Input 10 Current format on SDI Input 11 lt Current format on SDI Input 12
25. t Parameter This is the current source for the HDMI and SDI outputs When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right through the following sources 1 Multi View 2 Window 1 3 Window 2 4 Window 3 5 Window 4 6 Window 5 7 Window 6 8 Window 7 9 Window 8 10 Window 9 11 Window 10 12 Window 11 13 Window 12 14 Window 13 15 Window 14 16 Window 15 17 Window 16 DMON 16S Hardware Manual for Firmware Version 1 3 3 Copyright 2015 Decimator Design Pty Ltd Sydney Australia E amp OE 3 Control MV Output Format Parameter This is the current output format for the Multi Viewer When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right through the 26 video formats listed below and the BACK button to leave this SUB MENU 1 SD 720x487i59 94 10 HD 1920x1080psf23 98 19 HD 1280x720p30 2 SD 720x576i50 11 HD 1920x1080p30 20 HD 1280x720p29 97 3 HD 1920x1080i60 12 HD 1920x1080p29 97 21 HD 1280x720p25 13 HD 1920x1080p25 22 HD 1280x720p24 5 HD 1920x1080i50 14 HD 1920x1080p24 23 HD 1280x720p23 98 6 HD 1920x1080psf30 15 HD 1920x1080p23 98 24 3G 1920x1080p60 7 HD 1920x1080psf29 97 16 HD 1280x720p60 25 3G 1920x1080p59 94 8 HD 1920x1080psf25 17 HD 1280x720p59 94 26 3G 1920x1080p50 9 HD 1920x1080
26. utput When the sub menu is highlighted press the ENTER button to enter this sub menu Press the lt and gt buttons to move left or right through the following sources 2 Window 2 3 Window 3 4 Window 4 DMON 16S Hardware Manual for Firmware Version 1 3 4 Copyright 2015 Decimator Design Pty Ltd Sydney Australia E amp OE 5 Window 5 6 Window 6 7 Window 7 8 Window 8 9 Window 9 10 Window 10 11 Window 11 12 Window 12 13 Window 13 14 Window 14 15 Window 15 16 Window 16 7 Control MV Reference Parameter This is reference for the Multi Viewer When the sub menu is highlighted press ENTER to toggle through the following sources 1 Window 1 8 Control Pass Scaled Parameter When the Output Select is changed to window 1 to 16 this parameter determines whether the output is scaled or passed through unchanged from the selected window When the output is scaled the selected layout for window 1 is used When the sub menu is highlighted press ENTER to toggle through the following selections 2 No 9 Control Format Status Parameter When an input is detected the DMON 16S will display the format detected in the top left of each window by default unless the location has been modified via the USB Control Panel When the sub menu is highlighted press ENTER to toggle through the following selections 2 Show Always 3 Off 10 Control Audio Source ID Parameter The Audio Sour
Download Pdf Manuals
Related Search