User Manual - All Terrain Medical
Contents
1. Check that the gripbar is properly secured at the correct height Avoid contact with the front end when unfolding the frame as there is a risk of pinching The user s weight may not exceed 150 kg Do not use the Trionic Veloped as a wheel chair or for trans porting people The Veloped is aimed to be used as a walking aid mainly for outdoor use An annual control of the product is recommended to ensure its function either by your dealer or service representative authorized by Trionic Do not use a defect Veloped Service Instructions In order to maintain function and safety make sure the following is carried out regularly Clean the Veloped with normal dish washing liquid water and a dishcloth Make sure it s properly dried Keep the wheels clean with dish washing liquid water anda plastic brush Check that screws and levers are tightened properly If your Veloped is not in perfect condition please immedia tely contact your retailer dealer or service representative authorized to service your Trionic Veloped Trionic does not take responsibility for any alterations adjust ments or inadequate repairs done to the product without prior authorization Guarantee Trionic Walker has a 2 year guarantee valid from the acquisi tion date The guarantee is only valid for Trionic s original parts parts not cause for wear Serial Number Date Stamp Signature CE Trionic Sverige AB ensures that the above mentio2. Make sure to insert the plastic plate into the bot tom sleeve of the basket before attaching the basket to the frame Brake Adjustment 1 If the brakes function poorly loosen the adjustment screw on each brake lever counter clockwise and lock it in posi tion by screwing the lock nut towards the handle clock wise Contact your retailer or the person responsible for servic ing your Trionic Veloped if the brakes still function poorly Gripbar Adjustment 1 Release both quick release levers by folding them out wards 2 Adjust the gripbar to required height the most ade quate being the distance from the wrist to the ground when standing with the arms hang ing freely Use help to measure NOTE The easiest way to adjust the gripbar is when sit ting on the seat this way you can see the height indication marks clearly thus simplifying height adjustment 3 Lock both quick release levers by folding them inwards NOTE Do not operate the quick release levers like wing nuts or screws The quick release levers can be replaced with screws and nuts if there is a risk that the user accidentally releases the levers while using the Veloped Sa Se ds Br A ae PR VE ee Removing Installing the Rear Wheels The rear wheels are removable to simplify transportation of the Veloped 1 To remove the wheel press the black button at the centre of the wheel and pull the wheel
3. LI C t a wheel chair or for transporting people Technical Information Min height 750 mm Max height 940 mm Width 765 mm Length 1 030 mm Seat height 580 mm Seat width 445 mm Wheel dimension 310 x 55 mm Weight 12 3 14 9 kg Weight without wheels 7 7 kg Max user weight 150 kg Safety Do not stand on the Veloped or use it for transporting people Both brakes should be locked in park ing mode before you use the seat Before walking with the Veloped make sure it s completely unfolded Be extra careful on slanting surfaces The basket is tested for a 5 kg load evenly distributed Items should only be transported in the basket or on the seat Complete Delivery The following should be included in the package you have received 1 Veloped frame complete with gripbar brakes seat and basket 1 front wheel suspension with Trionic s patented Climbing Wheel e 2rear wheels with Quick Release Axle and brake hub 1 User Manual 1 Product Registration Card Complete Delivery The following should be included in the package you have received Seat cover The seat cover is made of resistant 600D polyester fabric It is easily mounted on the seat by the use of push buttons Hand wash 30 C Basket The basket has a zippered compartment ideal for keep ing valuables such as a wallet keys or a small handbag The basket is made of resistant 600D polyester fabric and it is attached through three velcro s
4. ections Hand wash 30 C First Time Use 1 Attach the rear wheels to the frames rear axle holes by press ing the black button in the cen tre of the wheel and then push ing the axle all the way into the axle hole Release the push button 2 Check that the wheels are properly attached by pulling pushing them sideways 3 Attach the front wheel sus pension to the front bottom end of the frame in the same manner i e press the black button at the bottom of the axle and press the axle into 5 Adjust the height of the han the axel hole from underneath dlebar as described in Chapter Release the push button Handlebar Adjustment 4 Check that the front wheel is securely fastened by lifting the frame from the surface and pulling the front wheel down wards Walking Mode 1 Unfold the Veloped by pull ing the gripbar handles side ways away from each other 2 Check that the Veloped locks in walking mode when unfolding it make sure you hear a click from the telescopic stay locking into position 3 The seat can be slid forward and rearward Push it forward to obtain maximum walking space Before using the seat reaching the basket or folding the Vel oped pull the seat rearwards Folding the Rollator 1 Pull the seat to the rear 3 Simultaneously lift and fold 4 Press the other button on one frame half against the the left of the telescopic stay 2 Press the button on the right ot
5. glish En gt JENUBW JdSf User Manual Dear user Thank you for choosing our product We truly hope you will experience many pleasant moments and enjoy your Trionic Veloped both off road and in the city Please read the User Manual carefully before use and follow all the guidelines especially the Safety Instructions The Veloped is primarily made for outdoor use By choosing a Trionic Veloped you will enjoy a whole range of benefits that will improve your access to different outdoor envi ronments and hopefully increase your quality of life Trionic Veloped The Veloped has a unique 3 wheel design but as you can see it has in fact four wheels It s aimed to be used as a walking aid especially for people with the desire to be physically active out doors Developed with a focus on walking and facilitating access for the user the Veloped is one of a kind Its main characteristic is a dual front wheel with the capacity to overcome obstacles up to 13 cm high The force required to overcome a smaller obstacle is also greatly reduced when compared to a traditional wheel The 3 wheel design coupled with the front wheel s suspension and the air filled tires increases both comfort and accessibility on all uneven surfaces The Veloped is tested and approved according to the internatio nal standard ISO 11199 2 2005 for a maximum user weight of 150 kg NOTE Do not use the Trionic Veloped as E O cl
6. hen sorted for recycling The parts are sorted into metal plastic and mixed materials The greater part of the product is made of aluminium steel and plastic Examples of components made of mixed materials are the brake levers wheels and gripbar Ifyou are uncertain of how to handle the recyclable mate rial please contact your local authorities as different muni cipalities recycling companies follow different recycling methods Trionic Sverige AB is a member of REPA PRO Europe Die Grtine punkt and fully implements the European Directive on Packaging and Packaging Waste dated December 20 1994 Troubleshooting If your Trionic Veloped does not work satisfactory you can check it by following the troubleshooting guide below If the guide does not help you solve the problem please contact your retailer service provider distributor or Trionic Sverige AB Problem The seat is sagging too low Possible cause The rear velcro band under the seat base needs to be tightened or the Veloped is not correctly unfolded Action Remove the seat cover and tighten the rear velcro band of the seat base with the Veloped fully unfolded Do not tighten the Velcro band too much since it may turn the sliding of the seat back and forth more difficult Problem Difficult steering Possible cause The front wheel is adjusted for irregular terrain upper position Action Change the setting of the front wheel suspension to the easy turn
7. her of the telescopic stay 5 Simultaneously lift and fold one frame half against the other in order to fully fold the Veloped together Motion Brake To operate the motion brake pull the brake lever upwards Brake with both levers at the same time Parking Brake 1 Push the locking button at the front of the lever forward by using your index finger Keep the button pushed forward while at the same time pulling the brake lever upwards 2 Release the locking button then the brake lever Make sure the locking mechanism is fixed in position Make sure the Vel oped does not move 3 To release the parking brake brake in the same manner as for using the motion brake Use the Parking Brakes Always lock both parking brakes before sitting down on the seat Ah Removing Attaching the Basket The basket of the Trionic Veloped has a 22 litre load ing capacity It has a small zippered pocket at the rear end for valuables and smaller objects The Veloped basket is removable and is attached to the frame basket rails with three velcro sections 1 Wrap the rear velcro flaps around the rails from under neath between the frame and the basket rail Fold them inwards and fix the velcro sec tions on the inner of the basket lining 2 Attach the front velcro flap in the same manner 3 Ifnecessary adjust the velcro sections to ensure that the basket is properly fastened NOTE
8. ing mode lower position as described in the chapter Change the Front Wheel Setting Problem Poor brake function Possible cause The brake hub or brake band is worn out or the cable is not tight enough Action Adjust the brake cable tension as described in the chapter Brake Adjustment Problem The rear or front wheels are not secured Possible cause The wheel has not been cor rectly attached Action Check that the push button of the axle locks correctly Please contact your service provider if the wheel does not lock correctly in position Trionic Sverige AB Stora Wasby G a Stallet SE 194 37 Upplands Vasby SWEDEN www trionic biz info trionic se Telephone 08 522 100 50 Fax 08 522 100 59 Corp ID 556698 1527 VAT Reg No SE556698152701 LURKING Foto John van Leer
9. ned pro duct meets the relevant legislation requirements 1993 584 con cerning medical products as well as the specifications contained in the provisions for medical products LVFS 2003 11 The pro duct meets the specifications in EC s directive regarding medi cal technical products 93 42 EEC Label The Walker is tested and approved accor ding to the provisions in the international standard for walking aid products ISO 11199 2 2005 Walking aids manipulated with both arms The user s weight may not exceed 150kg Max User Weight AN Manufacturing Date Serial Number Read the manual 7 According to ISO standard it is primarily Product Code EAN 13 N Aid approved according a ART no 11 00 011 nz KK LIRSKOG Stora W sby G a Stallet SE 194 37 Uppl V sby SWEDEN www trionic se info trionic se Tel 46 8 522 100 50 Fax 08 522 100 59 to BA Max Weight 150 kg of Width 76 cm Lo Length 102 cm H Height 75 94 cm ij 2010 02 SN 201002 000138 Primarily for outdoor use ISO 11199 2 2005 gt EI E OO Environmentally Friendly The Trionic Veloped is manufactured in the way to have as little negative impact on the environment as possible during its lifecy cle When the product has served its purpose it can be scrapped and the parts can be recycled e The product s aluminium components are separated from the remaining parts w
10. off 2 To attach the wheel press the black button at the cen tre of the wheel and push the wheel axle into the axle hole Release the button when the wheel is in its end position 3 Hold the tire and push pull the wheel back and forth lat erally to check if the wheel is properly secured i KA Removing Installing the Front Wheel The front wheel suspension is removable to simplify trans portation of the Veloped 1 Press the black button under the front hinge to release the front wheel suspension 2 To remove the entire wheel suspension lift the frames front end from the surface while pulling the wheel sus pension downwards 3 To install the front wheel suspension lift the front end of the frame press the black but ton and push the wheel axle into the axle hole placed under the frame Release the black push button Check that the front wheel suspension is secured by lifting the front end of the frame from the ground and then pulling the wheel suspension down wards Tire Air Pressure Check the tire air pressure reg ularly Trionic recommends a 1 5 2 0 bar tire pressure Maximum tire air pressure is 2 5 bar 35 psi Change Fron The Trionic Veloped has a front wheel suspension with the capacity to climb obstacles up to 13 cm high The wheel has two different settings one for off road irregular terrain and one for city streets There is an adjustment handle on the fr
11. ont wheel placed in the between the wheels that can be shifted between these two settings 1 Turn the front wheel for easier access to the adjust ment handle Grab the front left wheel and lift the Veloped front end Pull the adjustment handle outwards and slide the adjustor to the desired posi tion either upwards or down wards to its end position 2 Release the adjustment han dle when you have obtained the desired setting Irregular terrain Upper position Increased climbing capacity suspension on uneven surfaces and a higher directional stabil ity The Veloped is a bit more difficult to steer but it per forms better off road City Environment Lower posi tion For Easy turning with retained climbing capacity Removing Installing the Seat The Veloped s sliding seat is 1 Hold the seat cover with the comprised of a seat base and text Trionic to the right Wrap a removable cover fixed with the long flap between the teles nine push buttons copic stay and the seat base 2 Attach the three front push buttons of the long flap to the seat base 3 Press the three push buttons on the short flap onto the seat base 4 Finally press the three last push buttons of the long flap onto the short flap Safety Instructions Before use check that your Trionic Veloped functions properly Check the function of the motion and parking brakes Make sure that the frame is locked in unfolded walking mode
Download Pdf Manuals
Related Search