Aqua Vac Pool Cleaners 1711 Longwood Road West
Contents
1. Mail today to Aqua Vac Pool Cleaners 1711 Longwood Road West Palm Beach FL 33409 Attn Warranty Records Fold stamp and mail or fax to 561 688 0217 or register on the web at www aquavacsystems com Serial SharkVac Located inside filter area Registration of Warranty This registration card must be mailed within 10 days of purchase to secure limited warranty FOR USE IN THE U S A ONLY Name Address City State Zip Date Purchased Is this replacing another pool vacuum Yes No___ Ifyes what brand Purchased from City State Zip The size of my pool surface is X Surface is Have you seen us on the internet Yes No A ee fs tuH Limited Warranty WARRANTY REGISTRATION CARD Please fill out the warranty registration card on the cover of this manual Give complete information as requested on the card and return to AquaVac Pool Cleaners Any information or questions you may have concerning your AquaVac or this warranty may be obtained from AquaVac Pool Cleaners No dealer distributor or other similar person has any authority to make any warranties or representations concerning AquaVac Pool Cleaners products or to extend this warranty beyond the express items contained herein Accordingly AquaVac Pool Cleaners assumes no responsibility for any such warranties or representations beyond the express items contained in this limited warranty This limited warranty is valid and enforceable only in2. In the event of a defect malfunction or failure of your AquaVac or any warranted part within the warranty period Aqua Vac Pool Cleaners may at its sole option and own expense replace the AquaVac or any warranted part with another new or factory rebuilt identical or reasonably equivalent unit or part in lieu of repairing the defect TM Contents Important Safety Precautions General Information General Operating Instructions 9 10 Machine Assembly Parts 11 12 Maintenance Troubleshooting Specifications A HAYWARD COMPANY 1711 Longwood Road West Palm Beach Florida 33409 USA Toll Free 1 800 327 0141 561 688 0211 Fax 561 688 0217 E Mail info aquavacsystems com www aquavacsystems com or www haywardnet com Important Safety Precautions Attention User This manual contains important information that will help you in operating and maintaining this pool cleaner Please retain it for reference WARNING Before installing this product read and follow all warning notices and instructions which are included Failure to follow safety warnings and instructions can result in severe injury death or property damage Consumer Information and Safety The SharkVAC pool cleaner is designed and manufactured to provide safe and reliable service when installed operated and maintained according to the information in this manual Be sure to read and comply with all of the warnings and cautions Risk of electrical shock or
3. for such repair will not be made because of failure to comply with such factory specified instructions Filter cartridges are not covered by this warranty and will be replaced only with your prior approval of the charges Any unit that is used outside the continental U S is excluded from this warranty AquaVac Systems shall be held harmless outside the continental U S INSTRUCTIONS TO OBTAIN WARRANTY REPAIR To obtain repair of your AquaVac under this warranty the following procedure must be used e Select the nearest AquaVac Pool Cleaners Factory Authorized Service Center from the enclosed list and contact them to make service arrangements Ship the AquaVac together with two extra photocopies of satisfactory evidence of the purchase date to the Factory Authorized Service Center with shipping and delivery charges prepaid If you are unable to locate a Factory Authorized Service Center you may call Aqua Vac Pool Cleaners at 1 800 327 0141 for the nearest location or visit our website at www aquavacsystems com or www haywardnet com TERMS If a warranty claim is made within the warranty period your AquaVac will be repaired at no charge parts amp labor and will be returned to you or the service center freight prepaid After the warranty period repairs will be made only with your prior approval of the charges When requesting warranty repair PLEASE MAKE CERTAIN to state the serial number inside the main case of the cleaner REPLACEMENT
4. the United States of America on AquaVacs that are owned and operated in the United States of America This warranty gives you specific legal rights You may also have other rights which very from state to state Your AquaVac Pool Cleaner has been manufactured tested and inspected in accordance with carefully specified engineering requirements It is warranted to be free from defects in material and workmanship MODEL WARRANTY PERIOD COVERAGE SharkVac by Hayward 1 Year Parts amp labor on complete unit power train motor unit and power supply excluding filters This limited warranty includes both parts and labor for the periods above noted and is available only to the original purchaser USA only EXCEPTIONS AND EXCLUSIONS FROM WARRANTY The AquaVac must be used with electrical requirements as indicated on the AquaVac Power Supply Otherwise damage defects malfunctions or other failures of the AquaVac arising from use on electrical supply not as indicated are excepted and excluded from this warranty Defects malfunctions failure or damage of the AquaVac caused by improper unreasonable or negligent use or abuse by the consumer are excluded from this warranty If any repair is made on your AquaVac by anyone other than authorized personnel designated to perform such work without first having obtained factory instructions AquaVac Pool Cleaners at its sole option may determine that this warranty will not apply and that reimbursement
5. use Keeping the SharkVAC permanently in the pool may result in additional service requirements A Ne Sn Va D y m 1 Power Supply 8 Wheel Brush 2 Floating Cable 9 Sealed Motor Unit 3 Handle 10 Side Panel 4 On Off Switch 11 Dome Assy 5 Filter Cartridge 12 Filter Bucket 6 Drive Track 13 Wheel 7 Wheel Tube 14 Filter Door 11 Caddy Cart Instructions See Diagram 1 Caddy Cart will come partially assembled in the carton less the handle amp tube 1 amp 3 2 Insert the screw into the tube at the base of the caddy cart 4 secure with bolt 4 3 Insert the handle into the top of the tube amp insert the screw securing it with the bolt 1 amp 2 1 Handle 2 Nut 3 Tube 4 Screw 5 Base 12 Maintenance Clean the filter cartridge after each use e Open the SharkVAC by pressing the lid button 8 lifting up the dome cover e Remove the filter bucket assembly by lifting it up out of the SharkVAC with both hands from each side a I i J i o ine Mi i Br ros a f J u i f J hf e siting j 01 Ta Fi f NT j iS i A F le 1 ir CF j ea j F 5 r n H i y E FS A i ES Y j Ea la A E ee y e Flip the bucket assembly over to remove the debris amp then rinse with a garden hose to remove small particles Filter cartridges do not need to be remo
6. e suggest you exercise reasonable care in the handling of the vacuum and inspect the electrical cord frequently for damage or wear as with any other electrical appliance After use remove the unit and rinse with fresh water and remove any twists that may be present in the cord 19 PREVENTATIVE MAINTENANCE In order to maximize efficiency and receive long term service of your unit we suggest the following e Thoroughly rinse entire unit after use e Clean filters thoroughly after each use a clogged filter can decrease efficiency dra matically e Remove any twists in the cord after each use Twisting should be minimal if the unit is functioning properly Laying cord straightened out in sunlight is helpful Avoid allowing the unit to cool down in the water Inspect belts and filter frequently Replace when necessary PROTECT YOUR INVESTMENT Following these quick and easy steps will extend the life and efficiency of your AquaVac If you have any questions contact your local Service Center or call us at 1 800 327 0141 Monday Friday 8 30 a m 5 30 p m EST PARTS ORDERING INSTRUCTIONS Should you desire to order repair parts follow this simple procedure 1 Determine each of the parts you will need and identify them by part number Use this book as a guide be sure to note due to continual product improvement parts may vary depending on the year of manufacture 2 Contact your local Factory Authorized Serv
7. e water may cause severe damage and will result in loss of warranty Always remember to turn the power supply OFF and unplug it from the power outlet before removing the cleaner from the pool READ THESE IMPORTANT OPERATING TIPS BEFORE USING YOUR UNIT Dear Aqua Vac Owner Thank you for choosing SharkVAC In order to achieve optimal performance please read and follow these steps 1 Allow the cleaner the first 10 minutes of each use to map pool size and configuration The normal programmed cycle is not designed to begin until after this period Cleaner filter cartridges should be thoroughly cleaned after each use or as often as needed to ensure cleaner s optimal performance Before using your cleaner and especially when opening the pool for the first time remove larger items from the pool that may diminish the cleaner s performance Clean filter frequently when pool is excessively dirty For the first use run cleaner for the full cycle 2 hours to ensure a clean pool and give yourself a full understanding of the cleaner s capabilities Subsequent cleanings may take less than a full cycle Cleaner may periodically go to the wall but not necessarily climb to the vertical position This is a normal part of the programmed cycle Cleaner may stop in the middle of the pool and reverse during cleaning cycle This is a normal part of the programmed cycle DO NOT start cleaner out of the water Power button should only be sw
8. electrocution The electrical supply to this product must be installed in accordance with the National Electrical Code and all applicable local codes and ordinances Improper installation will create an electrical hazard which could result in death or serious injury to pool users or others due to electrical shock and may also cause damage to property WARNING Do not play with cleaner or cable or apply to body Can trap or tear hair or body parts Cable can trip or entangle swimmers which could result in drowning AN WARNING Do not allow swimmers in the pool while pool cleaner is operating WARNING e the risk of injury do not let children use or play with pool CAUTION Before installing the cleaner understand cleaner coverage The cleaner was not designed to automatically clean steps or to work under a solar cover It was also not designed to do initial cleanup for a new pool installation Operating the SharkVAC A warninG Your cleaner should not be used while people are swimming in the pool A Ground Fault Current Interrupter GFCI USA must be installed to protect your electrical outlet and to prevent any possible electric shock Failure to do so could create an electrical hazard which could result in death or serious injury to pool users or others due to electrical shock and may also cause damage to property CAUTION DO NOT switch the pool cleaner to ON if it is not immersed in the water Operating the cleaner out of th
9. has been manufactured with the highest degree of care and concern for safety We suggest the following safety precautions become part of your pool safety regulations SAVE THESE INSTRUCTIONS ALWAYS PUT THE MACHINE INTO THE WATER BEFORE CONNECTING IT TO THE ELECTRICAL OUTLET IT IS IMPORTANT FOR SWIMMERS SAFETY TO REMOVE THE UNIT IMMEDIATELY FOLLOWING USE THIS CAN ALSO IMPROVE THE OPERATING LIFE OF YOUR SHARKVAC BE CERTAIN THE MACHINE IS ONLY PLUGGED INTO A GROUNDED ELECTRICAL OUTLET EQUIPPED WITH AN APPROVED AND PROPERLY OPERATING GROUND FAULT CIRCUIT INTERRUPTER GFC 4 DO NOT HANDLE MACHINE WHILE IT IS PLUGGED INTO THE ELECTRICAL OUTLET 5 DONOT USE AN EXTENSION CORD THIS COULD CREATE A SAFETY HAZARD AND OR DAMAGE YOUR CLEANER ALWAYS STAY OUT OF THE POOL WHILE CLEANER IS IN OPERATION NEVER ALLOW PLUG TO ENTER THE POOL DO NOT OPERATE THE MACHINE OUT OF WATER THIS WILL DAMAGE THE MOTOR SEAL AND VOID THE WARRANTY DO NOT DRAG THE MACHINE OUT OF THE POOL AGAINST THE SIDE WALL THIS COULD DAMAGE UNIT AND OR YOUR POOL WALL DO NOT BURY CORD REPLACE DAMAGED CORDS WARNING TO REDUCE THE RISK OF INJURY DO NOT PERMIT CHILDREN TO USE THIS PRODUCT UNLESS THEY ARE CLOSELY SUPERVISED AT ALL TIMES IF THE SUPPLY CORD IS DAMAMGED IT MUST BE REPLACED BY THE MANUFACTURER ITS SERVICE AGENT OR SIMILARLY QUALIFIED PERSONS IN ORDER TO AVOID A HAZARD While the SharkVAC has been made to operate as safely as possible w
10. ice Center with the list of parts you will need Be sure to advise the Service Center of the AquaVac serial number and the date of purchase If you need the location of your nearest Service Center please call AquaVac Pool Cleaners 1 800 327 0141 or 561 688 0211 Or visit our website at www aquavacsystems com 3 All parts under unconditional warranty are confined to the specific limitations as stated 20 NOTES 21 NOTES 22 SHARKVAC HAYWARD poo Products ROBOTIG POOL CLEANER One source Every pool Pumps An innovative cleaner a with plenty of bite a Safety Introducing the newest addition to the TigerShark family of cleaners Hayward s SharkVAC is built with proven TigerShark i i Cleaners technology and high quality components A sleek low profile design and topaccess filter cartridge are a few of the great er features that give the new SharkVAC added bite u Controls Sha Electronic Chlorine Generators Total System AQUAAC A HAYWARD COMPANY 1711 Longwood Road West Palm Beach Florida 33409 USA Toll Free 1 800 327 0141 561 688 0211 Fax 561 688 0217 E Mail info aquavacsystems com www aquavacsystems com or www haywardnet com 11 08
11. in the maintenance section e Brush roller or drive tracks are stuck Check for debris and clean if necessary e Cleaner performs by both timing and a pool wall detection sensor which ever comes first e There are 3 intake ports located at bottom of filter bucket and near the brush roller Intake ports located next to the roller help collect debris such as leaves and sand better than single intake e Fine debris such as sand may need a smaller intake port for stronger suction E VAC can create a stronger suction with a high velocity flapper that can be installed at intake port Troubleshooting continued For the cleaners used in areas that have a lot of sand the cleaner may need to be rinsed with water at all flapper filter bucket s flapper is at intake port areas and may need rinsing at the dome push button to allow free operation Cleaner may get stuck if a high main drain is installed in the pool Cleaner may remain lodged on the drain for a short period of time but will eventually free it s self by virtue of the cleaner s embedded program The filter bucket is designed to be cleaned with the filters installed for normal clean up For deep cleaning the user can remove each filter cartridge and clean separately During the normal operating cycle of the cleaner the handle side of the unit will rise from the pool bottom to allow the unit to clear obstacles such as elevated main drains and stair steps It is normal t
12. itched to On position when unit is submerged The unit will automatically shut off but it is best to put power switch in OFF position when unit completes cleaning Plug in only to GFCI Ground Fault Circuit Interrupter protected 120VAC volt AC outlet Place the SharkVAC power supply so that it is at a minimum distance of 11 5 feet from the pool edge The length of the standard SharkVAC cable is 50 feet GENERAL INFORMATION Congratulations on your purchase ofa SharkVAC microprocessor controlled fully automatic pool cleaner The SharkVAC represents the highest standard in design performance and quality This manual contains important information regarding the operation and maintenance of your SharkVAC PLEASE READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY BEFORE PUTTING YOUR SHARKVAC INTO USE Deterioration discoloration or brittleness of any pool finish can be caused over time separately by or in combination with age incorrect pool water chemistry improper installation and other factors Customer hereby disclaims any and all claims and releases Manufacturer from any and all claims for damages to any pool plaster or vinyl liner in Customer s pool by reason of the use and or operation of the Cleaner Under no circumstances shall the Manufacturer be liable for any loss or damage whether direct consequential or incidental arising out of the use or inability to use the cleaner in Customer s pool FEATURES The SharkVAC indepe
13. ndently scrubs vacuums and filters your pool No installation no attachments Just drop it in and turn it on It is completely automatic Filter cleaning is much easier with the top access filter cartridge element Adaptive Seek Control Logic ASCL Microprocessor control optimizes cleaning routine for each individual pool size and shape Electronic Self Diagnostics and Overload Protection Simple Direct Drive design w non corrosive bearings for high reliability GENERAL OPERATING INSTRUCTIONS Take a moment to get familiar with the SharkVAC using the figure on page 11 Throughout this manual reference to this figure is made when referring to different components of the SharkVAC 3 Remove the SharkVAC by placing the carton ATA down and removing it from the box as shown ur SS J If the Caddy Cart is included the SharkVAC A e and the Power Supply will be premounted to eo a the cart See page 12 for SharkVAC Caddy Cart y 1 Select the nearest GFCI Ground Fault Circuit Interrupter protected 110 120 volt AC outlet 2 Place the SharkVAC power supply so that it is at a minimum distance of 11 5 feet from the pool edge The length of the standard SharkVAC cable is 50 feet MINIMUM 3 5M 11 5 FEET 3 Connect the floating cable to the power supply Use only the original SharkVAC Power Supply manufactured by Hayward Pool Products 4 Place the SharkVAC in the pool It will slowly sink to the bottom of the
14. o see the cleaner ride the wall for a short period of time this allows the unit to change position in the pool to assure full bottom coverage Perception of cleaner performance Confusion may exist over the perception of how the cleaner operates at different times during each cycle It is important to judge the performance of the cleaner by observing improved pool cleanliness after the cleaner has run a complete cleaning cycle If a cleaner has poor coverage of the pool in one cycle or only covers a small area check the filter and clean if necessary and make sure the unit is not getting caught on drains floor cleaning heads or toys The user may try starting the cleaner in different locations to find the optimum cleaning location If debris falls from cleaner while removing from pool it may be caused by filter overload increase frequency of filter cleaning Assure that there is no large debris blocking any of the three intakes Large debris must be removed from the pool before using machine If drain flaps are out of place or stuck by sand or leaves in the open position the flaps can be snapped back into place after cleaning the area Avoid dropping or throwing machine into pool Place cleaner away from the pool wall but do not throw the cleaner in the pool If the flotation cord gets twisted which can be caused by the cleaner getting stuck on large objects such as rocks toys or main drains it can be straightened by laying the flotation c
15. ord at full length if possible in the sun heat from the sun will help reduce the twisting If a high level of debris is visible through the dome windows remove cleaner quickly from the water to reduce the chance of the debris escaping the filter bucket and re entering the pool Specifications Current Consumption Weight w o cable Cable Length Type Materials Motor Unit Speed rpm Voltage Current amp Waterproof Sealing Motor Housing Overload Protection Filter Type Media Cleaning Routine Control Type Cleaning Cycle Drive System Power Supply Input Primary Voltage Output Secondary Voltage Rated Output Current Weight Shipping SharkVAC Carton Dimensions Shipping Weight with Caddy 0 78 amps 21 5 lbs 50 ft High Impact ABS Metal Parts of Non Ferrous Stainless Steel PUMP DRIVE 2 700 55 CO 24V DC 22V DC 2 62 0 63 ST Double Redundant Radial Shaft Seals amp 0 Rings sealed Watertight High Impact Polypropylene Electronic Overload Monitoring w auto shutoff Removable Re Usable Pleated Element Cartridge Pleated Cellulose Polyester Blend Adaptive Seek Control Logic ASCL Microprocessor 2 hrs Direct Drive w Polyurethane Drive Track amp Acetal Stainless Steel Bearing System 110 120 volt AC 24V DC 4 amps 8 3 Ibs Length Width Height 24 49 lbs without Caddy 43 lbs 18 IMPORTANT SAFETY INSTRUCTIONS The SharkVAC automatic swimming pool vacuum cleaner
16. pool as the air inside is released 5 Connect the power supply to the GFCI protected outlet and switch it on The SharkVAC will perform a self diagnostics routine for several minutes before starting the cleaning cycle Caution DO NOT switch power supply ON when the SharkVAC is out of water This may result in damage to the pump and drive motor seals which will VOID the warranty 6 The SharkVAC will automatically shut off after a cleaning cycle of 2 hours If your pool is cleaned in less time than 2 hrs you may shut the SharkVAC off manually by switching the power supply to the off position Should a second cleaning cycle be required switch OFF the power supply for 10 seconds and restart 7 After the pool has been cleaned switch OFF the power supply before removing the SharkVAC from the pool 8 Remove the SharkVAC from the water at the shallow end of the pool by pulling the cable until the SharkVAC reaches the surface Then lift it out of the water using the handle NOT the cable 9 Ifthe supply cord is damaged it must be replaced by the manufacturer its service agent or similarly qualified persons in order to avoid a hazard Caution When pulling the cable reel it in hand over hand do NOT reel it around your arm DO NOT ENTER THE SWIMMING POOL WHEN THE SharkVAC 15 OPERATING Optimum operating water temperature range for the SharkVAC is 50F 95F 10 C 35 C Remove the SharkVAC from the pool after each
17. ratures between 40F 115F 4 C a 46 C Cable Care With continued use the cable may become coiled like a telephone cord To correct this periodically stretching the cord out in the sun should remove any cord twists IMPORTANT The cable should be checked periodically for any external damage 15 Important Tips e Cleaning the filter cartridge after every use maximizes the unit s performance e Replace worn brushes To avoid clogging the SharkVAC s filter elements be sure all chemical powders are fully dissolved before operating the cleaner e In a pool with usually high calcium content more frequent cleaning of the filter is recommended e Save the SharkVAC original carton for extended storage or shipping requirements should your SharkVAC require dealer service The sealed Motor Unit and the Power Supply contain no user serviceable parts Opening them will automatically VOID your warranty Remove items such as thermometer toys and the like from the pool before operating the unit Such items can jam the cleaner and cause damage to the unit and or your pool Troubleshooting If SharkVAC fails to pick up fine or heavy debris e Clean the filter It may be clogged A filter cleaning solution can be used to remove excessive dirt and or sand If SharkVAC starts working momentarily but then stops working Impeller may be clogged or jammed with debris Check and clean if necessary following the instructions
18. ved to clean 13 To Remove the filter cartridges Unsnap and lift up both filter door latches Pull out the filter cartridges Using a garden hose with a spray nozzle wash the filter elements to remove debris Hold the filter elements as shown to allow the debris to fall out Wash the entire filter bucket assembly Previously Shown Place the filter cartridges back into the filter bucket assembly with the center frame reinforcements facing inward 14 e Snap the filter door latches into place e Return the filter bucket assembly into i the SharkVAC using the diagram shown a 7 to determine the front 8 back ty e Close the SharkVAC dome and press the lid button to snap dome into place AL a fa m T l i Cc gt ee e Filter cleaning solution can be used to remove excessive dirt and or sand Remember The cleaner your filter is the more efficient the SharkVAC will perform Periodic Cleaning of Moving Parts ZN WARNING Disconnect the power supply from electrical outlet before cleaning moving parts Inspect the venturi to ensure that no debris or hair has clogged the impeller The impeller can be cleaned by spraying it with a garden hose Remove any debris that has accumulated between the tracks and wheels Storage When out of the water store the SharkVAC in a dry shady location at tempe
Download Pdf Manuals
Related Search