User manual
Contents
1. CEE CEE Es PPPS EEE OPTICAL STEREO OUTPUT Mid 1 Optical output For connecting to an amplifier or receiver digitally 2 Stereo Output Analogue stereo output For connection to stereo amplifier or receiver with analogue input 3 AC input For connection of mains voltage Make sure that the plug has been correctly inserted and that the voltage corresponds to the text printed on the back panel of the cabinet 4 Main power switch Used to interrupt the mains voltage Explanation of display This unit does not feature any OSD On Screen Display Instead it features a more descriptive DOT matrix display that displays all the information required Below you can see a picture of the display and an explanation of the various symbols Showed when repeat 1 is activated Showed when repeat all is activated Showed when random is activated Track number Track time 12 CONNECTION Audio connection layout oe tangent Model CDP 200 Power rating AC 220V 240V 50Hz Max P2. B If liquid has been spilled on the unit or objects have fallen into the unit C If the unit has been exposed to rain or water D If the unit does not work properly after adhering to the instructions in the operation manual Only the settings described in the operation manual must be made as incorrect setting may result in damage and often will make it difficult for a qualified technician to make the unit work properly again E If the unit has been dropped or damaged in any other way F When the operation of the unit changes drastically the unit requires service Service Do not attempt to carry out any service work yourself By opening or removing the cabinet you will be exposed to dangerous voltage or other hazards Any service work should be carried out by qualified technicians Spare parts If spare parts are required make sure that the service technician uses spare parts specified by the manufacturer or spare parts with the same characteristics as the original Unauthorised spare parts may cause fire electrical shock etc Safety check After service or repairs on the unit ask the service technician to carry out a safety check to ensure that the unit is ready for use IMPORTANT INFORMATION Handling instructions The top and back panel of the unit may become warm after prolonged use This is not due to a defect Turn off the power when the unit is not used Protect the power cord Follow the ins
3. Load a disc If you want to play a disc you must load it You do that by pressing the eject button on the remote control or on the front panel of the CD player When the disc has been read the display will show the number of tracks on the disc and the total playback time If there is not disc in the tray the message NO DISC will be displayed Play Press the PLAY PAUSE button on the remote control or on the front panel once to start playback The counter on the left side of the display will start to count upward 14 OPERATION AND FUNCTIONS Pause Press the PLAY PAUSE button once more to stop playback The counter on the left side the display will start to blink To continue playback press the PLAY PAUSE button again The counter on the left side of the display will stop blinking and playback will continue otop Clear To stop playback completely press the STOP button once The display will again display the number of tracks on the disc and the total playback time When the STOP button is pressed all previous programming settings will be deleted Previous and next When a CD track is being played it is possible to switch to the previous track or to the next track If you want to continue to the next track you must press the gt gt next button on the remote control or on the front pan
4. Separation Harmonious distortion T H D noise Signal noise ratio Voltage and power consumption Dimensions WxDxH CDA 2 0V 0 2V 0 5 dB 1 dB 0 dB 1 dB 0 5 dB 2 dB 3 0 dB 2 dB 2 0 dB 60 dB 0 05 90 dB See the rear panel 430 x 240 x 60 mm We reserve the right to change the technical data and the design of the product without notice as a result of further development Tangent cannot guarantee the playback of homemade CD R RW and DVD R RW because of the several different types of discs and different types of software for producing these discs The playback ability of a CD R RW and DVD R RW depends on the disc and the software that made it 19 Service hotline 45 9641 1599 For further information please visit our website www tangent audio com Item 40554 A
5. Used to set the unit into standby and turning it back on LED indicator Lights green when the unit is turned on Lights red when the unit is in standby Prev Next Selects the previous or next track Repeat Makes it possible to play the tracks of a CD a certain order Random Makes it possible to play the tracks of a CD in random order Rewind Makes it possible to fast reverse Forward Makes it possible to fast forward Play Pause Starts playback at first press and stops playback at second press Stop Stops playback completely Open Close Opens and closes the CD tray 11 FRONT PANEL AND CONNECTIONS Connections rex tangent CE tang Model CDP 200 42 Power rating 220V 240V 50Hz 333 MEM e Max Power Consumption 10W 2 5 WARNING MM eee LEE EEE O 2 HM TI seed A Id TEN ZN Bela b pes S RISK OF ELECTRIC SHOCK EEEN DO NOT OPEN M n 400 TEE eH ELLE nnn EEE EES DM DEM POWER OFF
6. the unit please read the manual carefully and observe all the instructions given Power supply Only the power supply indicated on the rating plate must be used for this unit If you are not sure which power supply you have please contact the distributor or the local electricity supplier Earthing or polarisation If the plug cannot be inserted properly into the socket or if the plug does not fit the unit must not be used in your country Ventilation The cabinet is provided with slots and openings to ensure ventilation and reliable operation and to protect the unit against overheating Do not block or cover these openings The openings must never be blocked for instance by placing the unit on a bed a sofa a carpet or similar surface 05 Heat Do not place the unit near sources of heat such as radiators heat registers ovens or other units that produce heat Water and moisture The unit must not be placed close to water such as bathtub wash basin kitchen sink or laundry tub in a damp cellar or close to a swimming pool etc Cleaning Unplug the unit before cleaning Do not use liquid detergents and aerosol cleaning agents Use a dry cloth Power cords Wiring must be organised to prevent people from stepping on the cables and to avoid pinching by objects placed on or beside them Take special care around sockets and plug boxes and where the power cords leave the unit Overloading Make sure tha
7. ONO buttons will set the CDP 200 into standby Random All tracks on the disc loaded in CDP 200 are played in random order Repeat Repeats a single track or all tracks on a disc on CDP 200 Previous Fast reverse Selects the previous track on CDP 200 Press and hold to rewind playback Stop Stops playback on CDP 200 Eject Opens and closes the disc tray on the CDP 200 10 Use this button along with the 0 9 digits to select tracks on the CDP 200 above 10 For example press the 10 button and the 5 digit to select track 15 on a disc Display Canges between showing the time of Track Elapsed Track Remain and Disc Remain on the display Memory Use this button to set the playback order to a prefered order Enter Use this button when setting the memory playback order Play Pause Starts and pauses playback on CDP 200 Next Fast forward Selects the next track on CDP 200 Press and hold to fast forward playback some of the functions of the unit can only be performed by means of the remote control Some functions are connected with the selected signal input source Some buttons on the remote control may therefore not be available if the corresponding signal input source has not been selected 10 FRONT PANEL AND CONNECTIONS Front panel A gt NEXT _ 2n nna m p5 K NC D L NI NI NI T 1 NI 1 1 2 BIGITALAUDIG 2 Ji wm Y N Ee Y 2 Standby on
8. el once If you want to move on several tracks you must press gt gt until you reach the track desired If you wish to go back to one of the previous tracks you must use the same procedure but not the same button Use the lt lt Previous button instead 15 OPERATION AND FUNCTIONS Forward and rewind It is possible to perform a search in the track played If you wish to search forward press and hold the gt gt 1 next button on the remote until you get to that part of the track that you wish to hear and then let go of the button again You will see that the time counter in the display counts up very quickly and the symbol gt gt is shown on the display If you wish to search backward use the same procedure as when you search forward but use the I Prev button instead It is possible to activate the search function by pushing the Forward and Rewind buttons on the front panel Random It is possible to select random play by pressing the RANDOM button on the remote control or the front panel The CD tracks will be played in random order The display will show the text RAN when this function has been activated It is possible to activate random play both in stop mode and during playback Press the RANDOM button again if you wish to deactivate random play Note When you press lt lt or gt gt during random play it will not be possible to select the next track but any oth
9. er track 16 2 REPEAT RANDOM REWIND OPERATION AND FUNCTIONS Program The CDP 200 can be programmed to play the tracks of a CD in a certain order Press the MEMORY button when playback has been stopped The display will show the message MEMO1 01 The number to the left is the total numbers of tracks programmed The number to the right is the track number programmed to the number in the programmed order Finish the programming by pressing PLAY For examble if you wish to program the track numbers 5 8 4 in this specific order the following must be done Press the MEMORY button Press the number 5 button Press the ENTER button Press the number 8 button Press the ENTER button Press the number 4 button Press the ENTER button Confirm the programming by pressing PLAY Press the STOP button and then the MEMORY once to deactivate the programming function Then the normal display will return Note When you press lt lt or gt gt I you will select the next track in the programmed order Repeat The CDP 200 can be set to repeat one or all tracks of a CD This is done by means of the REPEAT button on the remote control or the front panel If you press the button once one track will be repeated and the display will show REP 1 If you press the button twice al
10. h an exclamation mark draws the user s attention to important instructions for use and maintenance in the accompanying manual which should be studied A symbol for CLASS II double insulation WARNING TO MINIMISE THE RISK OF FIRE OR ELECTRICAL SHOCK DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE DO NOT OPEN THE CABINET AS IT CONTAINS DANGEROUS VOLTAGE ONLY QUALIFIED TECHNICIANS ARE ALLOWED TO CARRY OUT REPAIR AND SERVICE CAUTION If the plug of the power cord needs to be replaced it is important that the replacement is identical to the plug to be replaced or that the new plug has been recommended by the manufacturer TO AVOID ELECTRICAL SHOCK IT IS IMPORTANT TO INSERT THE PLUG CORRECTLY INTO THE SOCKET 04 IMPORTANT SAFETY INSTRUCTIONS WARNING IT IS IMPORTANT THAT YOU READ AND OBSERVE BOTH THE INSTRUCTIONS IN THIS MANUAL AND THE INSTRUCTIONS ON THE UNIT KEEP THIS MANUAL FOR FUTURE REFERENCE This unit was designed and manufactured with a view to providing maximum safety for the user Incorrect use of the unit may cause electrical shock or fire The protection devices built into this unit will protect the user if the procedures below are observed in connection with installation use and repair This unit is fully electronic and contains no parts that can be repaired by the user DO NOT REMOVE THE CABINET RISK OF DANGEROUS VOLTAGE ONLY QUALIFIED TECHNICIANS ARE ALLOWED TO REPAIR THE UNIT Read the manual Upon unpacking
11. l tracks will be repeated and the the display will show REP ALL If you wish to deactivate the repeat function press the REPEAT button for a third time Note This function can also be used when MEMORY has been activated 17 TROUBLESHOOTING Troubleshooting PROBLEM CAUSE REMEDY No power when unit is turned on Switch on the electric current at the socket Check that the plug has been correctly inserted into the socket The internal fuse has blown and must be replaced by a qualified service technician The power cord has been damaged and must be replaced No sound The unit has not been turned on Incorrect connection to the amplifier No loudspeakers have been connected to the amplifier No CD in the unit The unit will not read the disc Check if the disc has been turned upside down Check if the disc is clean and undamaged Check if it is a CD or a CD r The unit skips some parts Check if the disc is clean and undamaged during playback The unit is positioned on an unstable surface A buzzing can be heard The RCA cables between the CDP 200 and the amplifier receiver have been damaged The RCA cables between the CDP 200 and the amplifier receiver have been wound around the power cord 18 TECHNICAL DATA Technical data Compatible disc types Output voltage Frequency characteristics Reference 1kHz OdB 20 Hz OdB 100 Hz OdB 10 kHz 0dB 20 kHz OdB Channel balance
12. n the room In case of condensation the unit will not work properly Turn off the unit Unplug the unit and leave it for 2 3 hours The unit will then have adapted to the environment and any condensation will have disappeared CONNECTION Connection to the mains tangent 1 Model CDP 200 257 Power rating 220V 240V 50Hz 41 Max Power Consumption 10W 22 WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN Do not turn on the power before all connections have been made correctly Check that all connections have been made correctly before turning on the power Check that the mains voltage is 230 240V AC50Hz before turning on the power Connection to the mains Check that all other connections have been made correctly before inserting the mains plug into the wall socket Then insert the plug into a suitable socket If the unit is to be used abroad you may need an adapter 08 REMOTE CONTROL Installation of batteries 1 Remove the cover as illustrated 3 Replace the cover BSS 5 Ss 2 Position two batteries of the type AAA R03 UM4 in the battery compartment Make sure that the orientation of the batteries is correct see drawing at bottom Do not mix new and old batteries and do not use different types of batteries f the remote control is not used for prolonged periods remove the batteries from the remote control to av
13. oid corrosion Using the remote control Direct the remote control at the sensor on the front panel of the unit When the remote control signal is received the unit reacts accordingly The remote control works within a range of a 6 metres Maximum 6m STK CIEE OR GIIDIOL OOP tangent sometimes the remote control does not work well in strong light You may have to move the unit if it is a problem Malfunction may occur if other remote controls are used near the unit Do not place any objects on the remote control as the batteries may become flat if a key is depressed constantly Make sure that there are no obstacles between remote control and unit Do not position the unit behind tinted glass as it may reduce the maximum range of the remote control 09 REMOTE CONTROL Remote control functions 2 n 1 9 AUTOTUNE ST MO MEMORY DISPLAY 10 CD DVD TUNER 11 9 JUO 3 BNO 41 eee L JLU J STATION STATION A 12 TUNING TUNING AUDIO SETUP VOLUME SUBTITLE TITLE MUTE 4 E REPEAT SSQANDOM SLOW 5 i JCJL J 6 a Paj 13 7 14 ngent HIFI 200 10 11 12 13 14 System off Sets all devices in the hifi 200 series into standby 0 9 Digits Selects tracks on the CDP 200 CD Turns the CDP and AMP 200 on and selects the CD input on the AMP 200 The DVD TUNER AUX1 AUX2 AUX3 and PH
14. ower Consumption 10 OPTICAL STEREO OUTPUT eee REE AC 220V 20V 50Hz RISK OF ELECTRIC SHOCK DO NOT OPEN Serial No Analog amplifier receiver e e e e e e e NUM NC Nu 7 Digital amplifier receiver O00000 POWER e e e e e e e X This page only contains suggestions for connection of your Tangent CDP 200 Note that the accessories in the pictures on this page are not included in the supply OPERATION AND FUNCTIONS On Off and standby 2 1 Turn on the unit by pressing the mains switch on the rear panel Then press the CD button on the remote or the standby button on the front panel Press the standby button on the remote control to switch into standby mode The display will turn off and all functions will be reduced to a minimum to make sure that the unit uses minimal power When in standby mode the unit only reacts to the CD button of the remote control 3 If you wish to turn off the unit to avoid any power consumption you must press the mains switch on the rear panel NO N 9 o gt m amp 5 4 gt 5 8 RO o m lt pA C CJ er C tangent CDP 200 CD PLAYER tangent
15. t wall sockets extension cords and plug boxes are not overloaded as this may lead to fire or electrical shock IMPORTANT SAFETY INSTRUCTIONS Lightning Unplug the unit for additional protection during thunder or when the unit is not used for prolonged periods This will prevent damage to the unit from lightning and power surges Penetration of objects and liquid Never push any foreign objects through the openings into the unit as they may touch dangerous voltage points or short circuit parts and thus cause fire or electric shock Do not spill liquid on the unit Accessories Do not place the unit on unstable surfaces such as a trolley stand tripod shelf or table The unit may fall and injure children or adults or be seriously damaged Use only trolley stand tripod shelf or table that is very stable or provided with the unit The unit must be installed in accordance with the manufacturer s instructions and by means of installation equipment recommended by the manufacturer If the unit is placed on a trolley the trolley must be moved very carefully Sudden stops unnecessary force and uneven surfaces may cause the trolley to turn over Loads Do not place heavy loads on the unit and do not step on it The load may fall and cause serious injury to persons or damage to the unit 06 Damage Unplug the unit and contact qualified technicians in the following cases A If the power cord or the plug is damaged
16. tangent __Pesign and Engineering CDP 200 Instruction manual CD Player The objective of every Tangent product is that fundamentally correct design can produce a product capable of achieving excellent performance and affordability www tangent audio com This operation manual supplies all the information that you need to have about your Tangent CDP 200 Please read this operation manual carefully before you start using the unit 02 CONTENTS Contents SAFETY PRECAUTIONS Safety precautions IMPORTANT SAFETY INSTRUCTIONS Important safety instructions IMPORTANT INFORMATION Important information CONNECTION Connection to the mains REMOTE CONTROL Installation of batteries Using the remote control Remote control functions FRONT PANEL AND CONNECTIONS Front panel Connections Explanation of Display CONTENTS 03 04 05 07 08 09 09 10 11 12 12 03 Audio connection layout OPERATION AND FUNCTIONS ON OFF and standby Load a disc Play Pause Stop Clear Previous and next Forward and rewind Random Program Repeat TROUBLESHOOTING Troubleshooting TECHNICAL DATA Technical data 14 14 14 15 15 15 16 16 17 17 SAFETY PRECAUTIONS A triangle with a lightning symbol draws the user s attention to dangerous voltage without insulation in the cabinet which may be high enough to entail a risk of electric shock A triangle wit
17. tructions below to prevent abnormal operation electrical shock fire or personal injury Hold the plug firmly when inserting it into the socket Avoid heat producing devices Do not place objects on the power cord Do not carry out service work on or change the power cord Positioning Do not place the unit in any of the fol places n sunlight close to heat producing devices or in an enclosed rack n places with high temperatures 40C or more or high relative humidity 9096 or more n dirty places as some internal parts may be damaged Do not put your fingers or any other objects into the unit Touching the internal parts is dangerous and may cause injury or damage Do not open the cabinet Do not place any foreign matter in the unit Interference Placing the unit near a television set radio or video player may cause poor picture and sound quality In that case move the unit further away from the television set radio or video player 07 Condensation Condensation may occur in the following cases When the unit is moved directly from a cold to a warm place When the unit is used in a room where the radiator has just been switched on or a place where the cold air from the air conditioning system is directed at the unit If the unit is used in the summer in a warm and humid room just after it has been moved from an air conditioned room f there is steam or a high level of humidity i
Download Pdf Manuals
Related Search