User Manual for Inon Viewfinder for Nauticam
Contents
1. User Manual for I non Viewfinder for Nauticam Housings 1 Take off the o ring From Picture 1 you can see there is an o ring around the finder of Nauticam housings It s used to fasten the viewfinder tightly Please take it off first 2 Remove the viewfinder itself After taking off the o ring you can remove the viewfinder itself easily through pushing a little hard from inner side 3 Take off the adapter ring You will see a serrated ring It s adapter ring to fasten the viewfinder adapter Please use tools like Anthis Ring Nut Tool or pliers to unfasten it Probably put a cloth on it to avoid any damage on the housing back cap 4 Install non Viewfinder After taking off all Nauticam viewfinder and accessories put Inon Viewfinder into it Please check if it completely attached on the back cap of housings 5 Screw the Adapter Ring From the inner of the cap you can see threaded around the finder Just screw the adapter ring on this position tightly From following picture you can see the four parts we are removing from Nauticam housings From left to right they are o ring for Nauticam finder Nauticam finder finder adapter ring and finder adapter Notice We strongly suggest you to test it without camera at the first time after installing the Inon viewfinder by yourselves Www divervision com info divervision com
Download Pdf Manuals
Related Search