ST2 STARMATE REPLAY SIRIUS Satellite Radio Plug and Play
Contents
1. 4 If Yes is chosen the Receiver will revert to the ST2 Starmate Replay User and Installation Guide 55 original factory settings 5 When the Factory Default is complete the Receiver will place you in Channel 184 the SIRIUS preview channel and display Call 1 888 539 SIRIUS to Subscribe The Receiver is still subscribed to the SIRIUS service SATELLITE RADIO Troubleshooting This section lists several common problems and suggested solutions If after trying the suggested solutions listed here you are still unable to resolve the problem you re having with your Receiver contact your installer dealer or retailer for more help Problem Cause and Suggested Solution Receiver does not power on Blown fuse or the power cable is not properly connected Check for a bad fuse and check power cable connection Receiver displays The satellite antenna is not connected to the Receiver Check the ANTENNA NOT DETECTED satellite antenna connection to the Receiver Audio static or loss of clarity FM frequency contains static Locate a quiet FM frequency on your vehicle radio and set the Receiver s FM transmitter frequency to match The vehicle antenna is not connected to radio Check vehicle antenna cable to be sure it is connected Receiver displays Check for obstacles over or around satellite antenna Change vehicle ACQUIRING SIGNAL location to eliminate nearby obstacles bridges2. 13 Storing Artist Names Song Titles Optional Installation Kits saisissait 14 and Sports Teams to Memory 24 Custom Vehicle Installation Kit STV2 14 Viewing Stored Alerts Stored in Memory 27 HomeKit STEI2 etr neret 15 Deleting an Alert Stored into Memory 27 ST2 Starmate Replay Receiver Basic Operation 16 Activating the S Seek Alert eerie 28 Controls and Features ssssssessss 17 Jump Bttori ect rtt eene 29 Remote Control ner rta rit rins 18 SameAIGrL s cato ce retta DR E teen abe 31 Installing Batteries in the Remote Control 18 Iristant Replay erret irte 31 Changing Charinels 2 p rre decet 19 Using InstantEeplay suee reprint 33 2 ST2 Starmate Replay User and Installation Guide STARMATE 72ejpfny Table of Contents continued FM Preset BUOM oos erre reete erret anra fees 37 Men Options ertt Sic atiest ie easeies 37 FMiTransmitter aed eu reet cote at Ran 38 FM Presets x BM OM Offi er 39 Game Alert sesiis reiten e rte en 39 iie 40 JUMP Settings eee entere teet 41 Erucee 41 JUMP Slee uec en tc e fr htt 42 Display Options acte tret noie sees 42 Memory OPON S sierra ede caeci uer eco 43 Automatic Memory Search 43 Clear All Memory 2 te pct 43 f Iregicisi To mE 44 XL
3. Route the cable from the lowest point of the rear window into the trunk Take advantage of any existing cable channels or wiring conduits For SUVs mini vans amp 5 door vehicles bring the cable into the vehicle under the rubber molding for the tailgate and continue under the interior trim From the trunk or rear of the vehicle route the cable around the passenger compartment and to the front of the vehicle to the receiver Take care not pull the cable across sharp edges that could damage it and keep it away from areas where it might entangle feet Coil any excess antenna cable in a location where it can be hidden Once the antenna cable is routed through the vehicle and you are satisfied with the cable routing peel the yellow protective material from the adhesive strip and adhere the adhesive strip to the rubber antenna cover tail Next peel the red protective material from the adhesive strip and press the rubber antenna cable cover tail firmly into place on the vehicle Double check that the location of the antenna and rubber antenna cable cover tail are correct and continue to press firmly down on rubber antenna cable cover tail for another 30 seconds RUBBER ANTENNA CABLE COVER TAIL VEHICLE MOUNTING SURFACE Note At room temperature 68 degrees maximum adhesion usually occurs within 72 hours During this period avoid car washes and other contact with the antenna and rubber antenna cable cover tail
4. Display Button DISP Momentarily pressing and releasing the DISP Display button while the default screen is displayed changes the artist name and song title to a scrolling single line large format display for easier viewing from a distance alll iL H 1l H Pressing and holding the DISP button for 172 seconds will cause the Receiver enter the channel list mode The channel list mode makes it easy to quickly search for and locate music by channel by category by artist and by song title 20 ST2 Starmate Replay User and Installation Guide Once the Receiver has entered the channel list mode a listing of the channel numbers and names is displayed Repeated momentary pressing and releasing of the DISP button will sequence the display between listings of artist names song titles and back to channel names Note If you are viewing a sports category channel list NFL NBA NHL or College pressing the DISP button will instead toggle between the team names and the current score of any live play by play game Use the category previous and next buttons to scroll through the music and entertainment categories and the channel up and down buttons to scroll STARMATE seeplar through the available channels in each category to find the channel to which you want to listen When you have found the channel you wish to listen to highlight the channel using the channel up and down button
5. Connecting the Receiver Connect the antenna and cigarette lighter power adapter to the Receiver to complete the installation The illustration below shows the location of the antenna and power connectors on the Receiver ANTENNA FM OUT AUDIO OUT SSS N POWER Plug the cigarette lighter power adapter cord into your vehicle s cigarette lighter and turn the Receiver On by pressing the power button Once you have verified that Receiver has powered on you can proceed with activating your SIRIUS subscription ST2 Starmate Replay User and Installation Guide STARMATE seeplar Activating your SIRIUS Subscription Before you can listen to the SIRIUS service you need to subscribe to the SIRIUS Satellite Radio service 1 Be sure that the Receiver is correctly installed and that the antenna is oriented to receive the SIRIUS signal 2 Press the power button to turn Receiver On After displaying the SIRIUS logo the Receiver will update the SIRIUS channel line up The display will show UPDATING CHANNELS and show the status of the update Wait until the channel updates have completed before pressing any buttons on the Receiver 3 Once the channels have been updated the display will change to Call 1 888 539 SIRIUS to Subscribe and will place you in SIRIUS Satellite Radio s Preview Channel channel 184 You will not be able to tune to any other ST2 Starmate Replay User and Installation G
6. will have the word Lock displayed to the right of the channel name 5 To lock or unlock a channels use the channel up and down buttons to highlight a channel and press the select button If you are locking a channel the word Lock will be displayed to the right of the channel name If you are unlocking a channel the word Lock will be removed from the right of the channel name To exit the Parental Control menu press the MENU button Edit Code This setting allows you to change a previously selected Parental Control code The first time the Edit Code setting is accessed you will be prompted to enter a four digit code This code can be any four digit number from 0000 to 9999 STARMATE seeplar es 4 If the correct code was entered the New Code prompt will appear Enter the new Parental Control code If you should exit this prompt without entering a code you will be prompted to set a code the next time you enter the Edit Code option To change the Parental Control code do the following 1 Use the channel up and down buttons to ides highlight Edit Code and press the select 5 You will then be prompted to confirm the new button code by entering it again 2 Atthe prompt enter the four digit Parental Control code om amp ll 6 If you confirmed the correct code the lock code is now changed and a confirmation screen is 3 If y
7. 30 45 or 60 minutes To activate or deactivate the Sleep Mode feature do the following 1 Use the channel up and down buttons to highlight Sleep Mode and press the select button 2 Use the channel up and down buttons to select the desired time 15 30 45 or 60 minutes to activate the Sleep Mode feature or choose Off to cancel the sleep feature and press the select button Pun To exit the Sleep Mode menu press the MENU button Signal Indicator The Signal Indicator display screen provides a visual display of the strength of the SIRIUS signal from the satellite antenna and also from terrestrial ground transmitters To display the Signal Indicator screen do the following 1 Use channel up and down buttons to highlight Signal Indicator and press the select button OD ER MINE 2 Two 10 segment horizontal bar graphs will be displayed with a sign to the left and a sign to the right SAT indicates the satellite signal strength while TER indicates the terrestrial signal strength if a terrestrial signal is available To exit the Signal Indicator menu press the MENU button Factory Default The Factory Default option will restore most every feature of the Receiver to the original factory settings The following is a list of all features affected by the Factory Default option 54 ST2 Starmate Replay User and Installation Guide All Presets are
8. End of Stored Audio Beginning of Live Broadcast A diamond shaped Play Position indicator is superimposed over the Progress Bar which provides a visual indicator of the current playback position in the Instant Replay memory Play Position Indicator ST2 Starmate Replay User and Installation Guide The Play Position indicator shows your current listening position in the stored audio When you press the Play Pause button to begin playback of the stored audio this indicator will begin to move to the right showing the progression of the playback through the Instant Replay memory provided that the memory is not full Play Position Indicator The portion of the Progress Bar behind the Play Position indicator shows how much you can rewind in the Instant Replay memory while the filled portion ahead of the Play Indicator shows how much you can fast forward in the memory While you are in the playback mode the Receiver continues to store the audio from the channel Obviously you will be unable to catch up to the live broadcast during playback as new audio is being SATELLITE RADIO stored at the same rate at which you are playing back the stored audio You can use the Fast Forward button to skip ahead or exitthe Instant Replay mode and begin listening to the live broadcast again Should you press the Play Pause button to stop the playback the play position indicator will stop moving and continue to pr
9. name or the song title m 24 ST2 Starmate Replay User and Installation Guide STARMATE seeplar 2 For Sports Games If the current tuned channel is an NFL NBA NHL or College play by play sports broadcast momentarily press and release the MEMO button The Receiver will display a menu to choose which sports team Initial Game Alert will provide an alert when the should be saved to memory team you have chosen is playing a game All Score Updates will provide an alert when the team you have chosen is playing a game and also when the scores are updated for the team B Using the channel up and down buttons choose If either of the teams is not available to save the desired alert and press the select button to that team will be displayed as unavailable save the selection to memory i p If both teams are available to save you will be prompted again to save the other team If you wish to save the team follow the same procedure as when saving the first team If you Using the channel up and down buttons choose do not wish to save press the MEMO button to the desired sports team when available and exit press the select button to save the current selection to memory The next screen will ask which kind of alert you wish to have ST2 Starmate Replay User and Installation Guide 25 3 To ensure that no duplicate entries are stored in memory the Receiver will check the sto
10. performance from the antenna Sedan Coupe Mount the antenna along the rear centerline of the vehicle roof located at the rear of the roof near the rear window SUV Mini Van Mount the antenna along the rear centerline of the vehicle roof located at the rear of the roof near the rear door hatch Pickup Truck Mount the antenna along the rear centerline of the cab roof located at the rear of the roof near the rear window Convertible Mount the antenna along the centerline of the trunk lid with the rubber antenna cable cover tail directed toward the rear window Clean the area where the antenna and rubber antenna cable cover tail will be mounted with the supplied alcohol swab Connect the rubber antenna cable cover tail to the antenna cable making sure that the strain relief on the antenna seats into the rubber antenna cable cover tail groove Route the antenna cable through the wire channel in the rubber antenna cable cover tail Do not yet attach the adhesive strip STARMATE seeplar ANTENNA UNDERSIDE PROTECTIVE MATERIAL RED SIDE ADHESIVE STRIP ANTENNA CABLE RUBBER ANTENNA CABLE COVER TAIL Temporarily position the antenna and rubber antenna cable cover tail in the selected mounting area and route the cable from the antenna to the vehicle s interior by tucking it underneath the rubber molding around rear window as shown ST2 Starmate Replay User and Installation Guide
11. 172 seconds to enter S Seek mode The alerts stored in memory will be displayed one at a time in page song fit Using the channel up and down buttons format Use the channel up and down buttons to highlight the alert that you would like to overwrite scroll through the listings This function allows you and press the select button to store the new to review previously stored program information alert If the new alert was successfully saved in memory a Artist Song Game Stored pop up screen followed by an X Used Y Empty screen will be displayed for 1 and 2 seconds respectively X is the total number of listings To exit this function momentarily press and release stored in memory and Y is the total number of the MEMO button memory listings still available for storage Deleting an Alert Stored into Memory To delete an alert stored in memory do the following 1 Press and hold the MEMO button for 17 H H seconds to enter S Seek mode The alerts The Receiver will revert to the last active display stored in memory will be displayed one at a mode time in page format 2 Use the channel up and down buttons to find the alert which you wish to delete and press the ST2 Starmate Replay User and Installation Guide select button 3 A screen displaying Delete Seek On and Seek Off will be displayed 4 Use the channel up and down buttons to highlight the Delete option and press the s
12. cleared All Game Alerts are cleared Receiversetto Normal Tuning Mode Display brightness set to 50 Display Contrast set to 50 FM Transmitter set to On FM Frequency set to 88 1 MHz AllS Seek memory cleared Clock set to 12 Hour Format Time Zone set to Eastern Standard Time Daylight Savings Time set to Observed Auto Shutdown set to Off Sleep Mode set to Off Auto Select set to Off ProgramAlert cleared Note that the Parental Control feature is not affected by the Factory Default option If a code has been set forthe Parental Control feature the code will not be reset by the Factory Default feature preventing someone from circumventing the Parental Control feature Channels which have been locked will remain locked To activate the Factory Default feature and restore STARMATE seeplar the features of the Receiver to the factory defaults do the following 1 Use the channel up and down buttons to highlight Factory Default and press the select button 2 Use the channel up and down buttons to select Yes to restore all settings to the settings from the factory or select No to leave them as is and return to the Menu Options menu 3 If Yes is chosen a confirmation is displayed Use the channel up and down buttons to select Yes to restore all settings to the settings from the factory or select No to leave them as is and return to the Menu Options menu
13. using the suction cup mount attach the suction cup mount to the vehicle windshield or other Place the Receiver into the mounting plate by first surface as follows placing the bottom of the Receiver into the tabs at the bottom of the mounting plate 1 and then pivoting the top of the receiver into the mounting plate until it snaps into place 2 1 Clean the area where you are attaching the suction cup with an alcohol wipe 2 Lift up the cam lever on the suction cup mount as shown 8 ST2 Starmate Replay User and Installation Guide STARMATE r2ejpfny 3 Place the suction cup mount on the windshield or other area and press the cam lever straight down towards the suction cup to flatten the suction cup as shown ST2 Starmate Replay User and Installation Guide 9 4 Lock the cam lever down as shown Installing the Magnetic Antenna The optimum mounting location for the antenna is on the roof of the vehicle with a minimum unobstructed area of 12 inches by 12 inches and exactly 6 inches from the rear roof edge of the vehicle the length of the rubber antenna cable cover tail It is important to avoid any obstructions that will block the SIRIUS signal obstructions such as a roof rack a sunroof roof mounted cargo containers or other antennas The following illustrations show the recommended mounting locations of the antenna for several types of vehicles Follow these recommendations for best
14. 44 ST2 Starmate Replay User and Installation Guide TIMEZONE atteso na ett eminens 49 Daylight Savings Time siisii 49 Pu E 50 SIDE 50 Alarmi Timer mene eren 50 ProgramvAIGrt z ebore eite needless 50 Program Time Day 25 decedens 51 Channel N imbDer uere ton dre 52 Program Alert On Off 52 AUtO ShtdO WI co het se ce EE Epi Enea EN Fea RUE 52 Sleep ModE e trece ien 53 SIGMA Info 97 Lo eR 53 Factory Default dc edt edt 54 Troubleshooting ioo t ei eene 56 SPECIGI o qe NNER 57 12 MONTH LIMITED WARRANTY ossee 58 2005 SIRIUS Satellite Radio Inc SIRIUS the SIRIUS dog logo channel names and logos are trademarks of Sirius Satellite Radio Inc NFL and the NFL Shield logo and the NFL Sunday Drive name and logo are registered trademarks of the National Football League NHL and the NHL Shield are registered trademarks of the National Hockey League NBA and the NBA silhouette logo are registered trademarks of NBA Properties Inc Velcro is a registered trademark of Velcro Industries B V All other trademarks service marks and logos are the property of their respective owners All Rights Reserved This receiver includes the eCos real time operating system eCos is published under the eCos License which can be found at the following website http www sirius com ecoslicense SATELLITE RADIO Safety Precautions Ao warning Take the
15. Buttons Navigates through channels and display screens and highlights items 10 11 12 13 14 on the display Category Previous Next Buttons Navigates through the category list screen which displays SIRIUS channel categories Preset Number Buttons 0 9 Sets and selects preset channels Also used to directly tune channels by entering the channel number BAND Button P Tune Pressing and releasing switches between the five preset banks A B C which hold ten presets each Pressing and holding enables Preset Tune Mode which allows for viewing and listening of stored presets with the channel up down buttons FM Preset Button Selects between preset FM frequencies used for the built in wireless transmitter Jump Button Used to quickly switch between the current channel and a favorite channel MENU Button Used to access menu options to make setup and feature changes 1 Power Button b Turns the Receiver power On and Off 2 Category Previous Next Buttons Navigates through categories 3 MUTE Button Mutes the audio 4 Channel Up Down Buttons Navigates through channels and display screens 5 Rewind Button Used to rewind through a broadcast saved in Instant Replay 6 Play Pause Button Pause Function Used to pause a broadcast for Instant Replay Play Function Used to play a broadcast saved in Instant Replay 7 Fast Forward Button Used to fast forward through a broadcast saved in Instant Repl
16. US amp SATELLITE RADIO STARMATE seeplars ST2 STARMATE REPLAY SIRIUS Satellite Radio Plug and Play IU E T TUE Talo B e E C LES UT T EE CT Le G SATELLITE RADIO CONGRATULATIONS Your new ST2 Starmate Replay SIRIUS Satellite Radio Plug and Play lets you enjoy SIRIUS Satellite Radio s digital entertainment in your vehicle home or boat Use this guide to familiarize yourself with all of ST2 s features and capabilities For the latest information about this and other SIRIUS products please visit http www siriusradio com Table of Contents Safety Precautions ece intrent nis 4 Display Button DISP rro 20 ECC Walrnlllg rtc et doe aur 5 Selecting Channels Directly ssse 21 Cleaning the Receiver eerte eennee enero nnnnin 5 Advanced Features eese 21 Package Contents oett dai deen 6 Channel Presets BAND sese 21 Installatloii ion eee 7 Storing Channel Presets sessesssss 21 LOCALON E 7 Using Channel Presets ueeo rete 22 Mounting the Receiver ssssssseeees 7 Searching for a Channel Preset P TUNE Mode 22 Installing the Magnetic Antenna sssss 9 Memory MEMO and Song Seek Connecting the Receiver seseesesesssss 12 S Seek Furiclions uieeet mes 23 Activating your SIRIUS Subscription
17. affic option which will cause the Receiver to access a specific city traffic report pressing the Jump button will immediately begin a search for the city s traffic report The Jump icon will be displayed in the lower right corner of the display screen to indicate that a Jump search is active The search process may take up to 4 minutes until the city s traffic report found The Receiver will automatically tune to the traffic report channel when the traffic report is found Pressing the Jump button again while the Receiver is actively searching will cancel the search m E Pressing the Jump button after the Receiver has tuned to the traffic report channel will return you to the previous channel Ifthe Jump button has been preset to the JumpSet option pressing the Jump button will immediately tune to the channel preset into the JumpSet The Jump icon will be displayed in the lower right corner ofthe display screen to indicate that the Jump preset channel is currently tuned Pressing the Jump button again will return to the previous channel Note The channel preset for the Jump button remains the same regardless of which preset memory bank is currently selected ST2 Starmate Replay User and Installation Guide STARMATE seeplar Game Alert The Receiver has a feature called Game Alert which can automatically alert you when your favorite sports team is playing a game When a sports game involving one of your fa
18. annels and alerts the user when a program saved in memory matches a selection currently being played A total of 30 artists songs and sports teams may be stored in memory If you have saved a sports team or teams in memory at the time Receiver is initially powered on you will be alerted if your sports teams are playing in a game being broadcast Also while listening to your SIRIUS receiver should one of your teams begin to play a game you will be alerted If either the artist name or song title is not available to save the choice will be displayed as unavailable Using the channel up and down buttons choose Store Artist or Store Song when available and press the select button to save the current selection to memory If both the artist and song are available to save you will be prompted again to save whichever Storing Artist Names Song Titles and Sports Teams to Memory If you are listening to a song or other entertainment channel or a sports team and wish to save the artist song or sports team selection to memory for future S Seek alerts do the following A 4 For Artist N S Titles Ifth one you haven t yet saved song title or artist TOPASI Tames OIM TuS S name If you do not wish to save press the currently tuned channel is a music or MEMO button to exit entertainment channel momentarily press and release the MEMO button The Receiver will display a menu to choose to store the artist
19. ast adjusts the relationship the following between the background and the text on the LCD 1 Use the channel up and down buttons to display Use the channel up and down buttons to highlight Auto Memory Search and press the adjust the brightness contrast The bar graph will select button move to indicate the change 2 Use the channel up and down buttons to highlight either On or Off and press the wm saul To exit the Brightness Contrast screen press the MENU button Memory Options To exit the Memory Options menu press the MENU The Memory Options feature allows you to set button whether the automatic S Seek feature is On or Off Clear All Memory and al oiprovides the a Way toicleai erase all thg To clear all the S Seek alerts stored in memory do stored S Seek alerts from memory the following 1 Use the channel up and down buttons to highlight Clear All Memory and press the select button 2 At the confirmation screen use the channel up ST2 Starmate Replay User and Installation Guide and down buttons to highlight Yes and press the select button The S Seek memory is now erased To exit the Memory Options menu press the MENU button Auto Select Auto Select chooses whether the Receiver immediately tunes to a channel when a channel is highlighted or whether you must first press the select button in order to tune to a highlighted channe
20. at the city list is updating Wait 10 minutes and then try again SATELLITE RADIO To exit the Jump Settings menu press the MENU button JumpSet To set the Jump button to a specific channel other than a traffic channel when pressed do the following 1 Use the channel up and down buttons to highlight the JumpSet option and press the select button 2 The following screen will be displayed Use the channel up and down buttons to tune to the channel you want assigned to the Jump button When the channel is tuned press and hold the Jump button for 2 seconds until the following screen is displayed 42 ST2 Starmate Replay User and Installation Guide The channel selected is now assigned to the Jump button To exit the Jump settings menu press the MENU button At any time while listening to a channel other than a traffic channel the channel may be assigned to the Jump button by simply pressing and holding the Jump button for 2 seconds Display Options The Receiver s display screen can be adjusted for brightness and contrast using the Display Options Use the channel up and down buttons to highlight the Brightness or Contrast option and press the select button STARMATE seeplar Brightness adjusts the overall intensity of the LCD Automatic Memory Search display to help with viewing in different lighting To turn the automatic memory search On or Off do conditions Contr
21. ay 8 Volume Buttons Adjusts the audio volume up amp down 9 Number Buttons 0 9 Used for directly selecting channels and for presets 10 MEMO Memory Button Saves and recalls artist names song titles and sports teams Holding this button down enters the S Seek mode 11 BAND Button Switches between preset bands A B and C 12 MENU Button Used to access menu options to make setup and feature changes 13 DISP Button Toggles display between the default display screen and large screen display mode Holding this button down switches to the channel list mode Installing Batteries in the 14 Jump Button Used to quickly switch between the current channel and a favorite Remote Control channel 1 Remove the battery cover 45 FM Preset Button Selects between preset FM frequencies used for the built in 2 Install CR2025 battery positive side is up wireless transmitter 3 Replace the battery cover 16 Select Button Selects items highlighted on the display screen ST2 Starmate Replay User and Installation Guide STARMATE r2ejpfny After you have successfully activated your SIRIUS subscription and the Receiver has received the subscription information from the SIRIUS signal the default display screen will be displayed Default Display Screen Channel Channel Name Number reed Auto Sizing Auto Sizing Scrolling bebe Song Title rtist Name Band Pr
22. buttons highlight the FM preset you wish to set or change and press the select button A list of FM frequencies will be displayed beginning with the currently selected FM frequency for the preset STARMATE r2ejpfny 3 Use your FM radio to locate quiet FM frequencies where there is no interference from adjacent FM stations These are the frequencies which should be added to the FM Presets list 4 Using the channel up and down buttons highlight the frequency you wish to select for the preset and press the select button The FM frequency will then be stored in the preset If you do not want a frequency for the preset choose EMPTY from the menu and press the select button 5 You may then continue to select FM frequencies for other presets using the same steps To exit the FM Presets menu press the MENU button FM On Off To turn the Receiver s FM transmitter On or Off use the channel up and down buttons to highlight the FM On Off menu item and press the select button ST2 Starmate Replay User and Installation Guide Use the channel up and down buttons to highlight FM On or FM Off and press the select button To exit the FM On Off menu press the MENU button Game Alert The Game Alert feature allows you to store your favorite sports teams in memory The Receiver will constantly scan the SIRIUS channels and will sound an alert when a sports team you had stored in memory is playing or when t
23. ceiver in a way that might divert your attention from driving safely As a driver you alone are responsible for safely operating your vehicle in accordance with traffic safety laws at all times Cleaning the Receiver If the Receiver becomes dirty turn its power off and wipe it clean with a soft dry cloth Do not use hard cloths paint thinner alcohol or other volatile solvents to clean the Receiver These may cause damage to the plastic or remove indicator characters Package Contents The following items are packaged with the ST2 Starmate Replay Check the package to be all ofthe items are included If any ofthe items are missing please contact the retailer where you purchased the product Starmate Replay Alcohol Swab and ST2 Receiver SL Velcro Strip Starmate Replay ARS Suction Cup Mount Remote Control Ed i amp Screws o 1 Kd I Mounting Plate 0m0 Magnetic Antenna Cigarette Lighter Power Cord Rubber Antenna Cable Cover Tail User and amp Adhesive Strip Installation Guide 6 ST2 Starmate Replay User and Installation Guide STARMATE seeplar Installation Installation of your ST2 Starmate Replay Receiver is easy 1 Choose a location in your vehicle where you will mount the Receiver 2 Mount the Receiver to the suction cup mount and attach the suction cup portion of the mount to the vehicle window or use the velcro strip to mount the Receiver 3 Install the magnet
24. e second rewinds playback in 10 second intervals which increase to 15 and then 30 second intervals the longer the Rewind button remains pressed Playback begins immediately when the button is released If the beginning of the stored audio is reached while rewinding a beep will be heard and playback will ST2 Starmate Replay User and Installation Guide automatically begin Using Instant Replay To begin using the Instant Replay feature of the Receiver press the Pause Play button This causes the Receiver to enter the Instant Replay pause mode which mutes the audio from the Receiver A Paused message will be displayed for two seconds to confirm that the Receiver has entered the Instant Replay mode To listen to the audio that was stored press the Play Pause button again and the Receiver will begin to play back the audio stored in the Instant Replay memory from the point where you pressed the Play Pause button As you are listening to the playback of the stored audio you may either fast forward or rewind through the stored audio by pressing the fast forward or rewind buttons without having to press the Play Pause button first Refer to the previous sections SATELLITE RADIO describing the Rewind and Fast Forward buttons for specific instructions for their use Note If the Receiver is tuned to another channel while in the Instant Replay mode the Instant Replay mode is exited all the audio stored in the Ins
25. e of a match was found An audible beep tone will also be heard indicating that a match was found E all E The Receiver then displays the S Seek Alert or My Game Zone screen which displays a list of the current matches No alert is provided for the currently selected channel ST2 Starmate Replay User and Installation Guide You can now select the artist song or sports game that you wish to tune to by using the channel up and down buttons to highlight your selection from the list and then pressing the select button If no selection is made within 10 seconds the Receiver will revert to the last active display mode NOTE Play of the current selection will continue until a new selection is chosen from the S Seek or My Game Zone list Jump Button The Receiver has a special preset button called the Jump button which is identified by the icon The Jump button is used to quickly tune to a channel that is accessed frequently and temporarily such as a traffic channel a weather channel a SATELLITE RADIO news channel a sports channel or any channel at all Pressing the Jump button allows you to quickly tune to the specific channel you have programmed into the Jump button and then tune back to the original channel by pressing the Jump button again Refer to the Menu Options section of this manual for instructions for configuring the Jump button If the Jump button has been preset to the tr
26. ed and the Receiver will resume playing the live broadcast Pressing and holding the Fast Forward button for one second advances the playback forward in 10 second intervals which increases to 15 and then 30 second intervals the longer the Fast Forward button remains pressed Playback begins immediately when the button is released When the end of the stored audio is reached a beep will be heard the Instant Replay mode will be exited and the Receiver will resume playing the live broadcast Rewind button The rewind button rewinds moves you backwards through the stored audio Pressing and releasing the Rewind button rewinds to the start of the current song or ST2 Starmate Replay User and Installation Guide STARMATE seeplar program in the stored audio and playback automatically begins Repeatedly pressing and releasing the Rewind Button causes the Receiver to continue to move backwards in the stored audio to the start of each previous song or program until the beginning of the stored audio is reached If the beginning of the stored audio is reached a beep will be heard if the Confirmation Tone option is enabled and playback will automatically begin Note Depending upon where in a particular broadcast the channel was selected the start of a song or program may not be available in memory If this occurs the playback will start from where the audio began to be stored Pressing and holding the Rewind button for on
27. elect button A delete confirmation screen will appear To permanently delete the alert from the memory list highlight Yes using the channel up and down buttons and press the select button to confirm 5 A Deleted pop up screen followed by an X Used Y Empty screen will be displayed for 1 28 ST2 Starmate Replay User and Installation Guide and 2 seconds respectively X is the total number of listings saved in memory and Y is the total number of memory listings still available for storage The Receiver will revert to the last active display mode Activating the S Seek Alert To activate the S Seek alert function to begin receiving alerts do the following 1 Press and hold the MEMO button for 172 seconds to enter the S Seek mode 2 Press and release the select button A screen displaying Delete Seek On and Seek Off will be displayed Del STARMATE 72ejpfny 3 To enable S Seek alerts use the channel up and down buttons to highlight the Seek On option and press the select button The S Seek function is now enabled When the S Seek option is enabled whenever the Receiver is turned on it automatically searches the incoming channels to determine if a match exists with the program information stored in the S Seek memory If one or more matches are found a pop up screen momentarily appears for 2 seconds and displays S Seek Alert or Game Alert depending upon which typ
28. eset Antenna zd Bank Number Signal ae Clock Strength oc Channel Category When the Receiver is powered On the previously selected channel will automatically begin playing and the artist name and song title of the currently playing song will be displayed Changing Channels Pressing the channel up or down button will cause the Receiver to immediately tune to the next or previous channel Pressing the category previous or next button will cause the receiver to display a list of the channels in the current category highlighting the channel to ST2 Starmate Replay User and Installation Guide which you are currently tuned Repeated momentary pressing of the DISP button while in the category list mode will cause the Receiver to sequence the display between listings of artist names song titles and back to channel names va Pressing the category previous or next button again will cause the Receiver to display a listing of the previous or next channel category Use the channel up down buttons to highlight a SATELLITE RADIO channel within a category and press the select button to tune to the highlighted channel When a new channel is selected the display will revert to the default display screen for the new channel To exit the channel list mode without changing to a different channel press and hold the DISP button for 172 seconds until the default screen is displayed
29. following precautions to prevent fire and avoid personal injury Besure the Receiver is installed as described in the Installation Guide Theuse suggestions contained in this User Guide are subject to any restrictions or limitations that may be imposed by applicable law the purchaser should check applicable law for any restrictions or limitations before installing and or operating this Receiver Failure to follow these safety instructions and warnings may result in a serious accident To avoid short circuits never put or leave any metallic objects coins tools etc inside the Receiver fthe Receiver emits smoke or unusual odors turn the power off immediately Donotdrop the Receiver or subject itto strong shocks 4 ST2 Starmate Replay User and Installation Guide Ifthe LCD display on the Receiver becomes damaged or broken do not touch the liquid crystal fluid The fluid can be dangerous to your health If the liquid crystal fluid contacts your body or clothing immediately wash it off with soap and water A Caution Take the following precautions to keep the Receiver in proper working order Donotopen the Receiver When replacing a fuse use only a new one with the proper rating Using a fuse with the wrong rating may cause the Receiver to malfunction Topreventa short circuit when replacing a fuse first disconnect the wiring harness Note If the Receiver doesn t seem to be working proper
30. ght On or Off and press the select button 4 If the wrong code is entered a message will be displayed indicating that the wrong code has been entered To exit the Confirmation Tone menu press the MENU button Parental Control The Receiver has the ability to lock out with password protection any channels you do not want Lock Unlock others to access without your permission A locked To lock or unlock a channel do the following channel will not appear in the channel list 1 Use the channel up and down buttons to highlight Lock Unlock and press the select button 2 If this is the first time that Parental Control is being used you will be prompted to create and ST2 Starmate Replay User and Installation Guide 45 enter a four digit numerical code This code can be any four digit number from 0000 to 9999 If you should exit this prompt without entering a code you will be prompted to set a code next time you enter the Lock Unlock option 3 If a code has been previously set a Enter Code prompt will be displayed Enter your four digit code and press the select button to continue 4 When the correct code has been entered a listing of channels will be displayed Use the channel up and down buttons to navigate to the channel you wish to lock or unlock and press the select button A previously locked channel 46 ST2 Starmate Replay User and Installation Guide
31. h day and to turn the alarm feature On or Off Set Alarm To turn the alarm On or Off do the following 1 Use the channel up and down buttons to highlight Set Alarm and press the select button 2 Use the channel up and down buttons to highlight Alarm On or Alarm Off and press the select button To exit the Set Alarm menu press the MENU button 50 ST2 Starmate Replay User and Installation Guide Alarm Time To set the time of the alarm do the following 1 Use the channel up and down buttons to highlight Alarm Time and press the select button 2 Use the channel up and down buttons to change the minutes and the category previous and next buttons to change the hours to select the desired alarm time 3 When you have selected the desired alarm time press the select button to set the alarm time and exit To exit the Alarm Time menu press the MENU button Program Alert The Program Alert feature allows you to program the Receiver to automatically tune to a specific channel at a specific time The Receiver must be powered STARMATE r2ejpfny on in order for this feature to function Program Time Day To program the time and day when the receiver will tune to the specified channel do the following 1 Use the channel up and down buttons to highlight Program Time Day and press the select button 2 At the Program Time Day screen use
32. here is a score update for ateam depending on which option you have chosen for the sports team Sports teams which you have selected and which are currently playing will be displayed in a category called My Game Zone You may select one sports team from each sports league and the college category using the Game Alert option however more teams may be chosen SATELLITE RADIO by using the Memory MEMO function See the Note that for college teams you will receive an section titled Memory MEMO and Song Seek S alert for all teams playing for that college Seek Functions for more information about adding 4 Use the channel up and down buttons to additional teams highlight which type of an alert you want and To choose sports teams to add for game alerts do press the select button the following 1 Use the channel up and down buttons to highlight Game Alert and press the select button 2 Use the channel up and down buttons to highlight the sports league or college category of When the Receiver is powered on and while it the sports team you wish to add and press the is playing Initial Game Alert will sound an alert select button when the team you have chosen is playing a game All Score Updates does the same but also sounds an alert when the scores are updated for the chosen team To exit the Game Alert menu press the MENU 3 Use the channel up and down buttons to highlight button the league team na
33. hicle into your home The kit consists of the following items Stand A stand into which to snap your Receiver while being used in your home AC Adapter A power adapter to power your Receiver in the home Audio Cables Cables to connect the Receiver to powered speakers or your home entertainment system ST2 Starmate Replay User and Installation Guide 15 Home Antenna A SIRIUS antenna to connect to your Receiver while in your home SIRIUS SATELLITE RADIO ST2 Starmate Replay User an BET CHEUTST E CTTTTe 3 STARMATE seeplar Controls and Features 1 2 ST2 Starmate Replay User and Installation Guide POWER Button Turns the Receiver s power On and Off Rewind Button Used to rewind through a broadcast saved in Instant Replay Play Pause Button Pause Function Used to pause a broadcast for Instant Replay Play Function Used to play a broadcast saved in Instant Replay Fast Forward Button Used to fast forward through a broadcast saved in Instant Replay MEMO Memory Button S Seek Function Saves and recalls artist names song titles and sports teams Holding the button down enters the S Seek mode DISP Display Button Toggles display between the default display screen and large screen display mode Holding the DISP button down switches the display to the channel list mode Select Button Selects items highlighted on the display screen Channel Up Down
34. ic antenna on the roof of the vehicle and route the antenna cable to the Receiver 4 Connect the power cord for the Receiver to your vehicle s cigarette lighter 5 Subscribe to the SIRIUS service and begin enjoying the SIRIUS entertainment Location Choose a location in your vehicle where the Receiver will not block your vision interfere with the vehicle controls or obstruct the air bag The location should be suitable for using the suction cup mount such as the windshield or other flat smooth surface or a surface suitable for using the velcro mounting The location should be easily reachable and provide ST2 Starmate Replay User and Installation Guide good visibility of the Receiver Mounting the Receiver The Receiver may be attached to the vehicle by using the suction cup mount or by using the velcro strips If you are using the suction cup mount attach the mounting plate to the suction cup mount by using the provided bolts and hex nuts as shown below Be sure the large tab on the mounting plate is facing up SATELLITE RADIO If you are using the velcro strip for mounting attach the velcro strip to the back of the mounting plate Route the cables through the mounting plate underneath the tabs as shown The cables may be routed across the mounting plate or routed down to exit at the bottom E Jalalain If you are
35. ill be displayed To continue press any key on the Receiver The installation of your Receiver is now complete and you are ready to begin enjoying SIRIUS Satellite Radio s digital entertainment Optional Installation Kits There are two optional installation kits which may be purchased for use with your ST2 Starmate Replay Receiver a Custom Vehicle Installation Kit Model STV2 and a Home Kit Model STH2 These kits may be purchased from your SIRIUS Satellite Radio retailer Custom Vehicle Installation Kit STV2 The optional custom vehicle installation kit provides additional items for a more permanent installation in your vehicle The kit consists of the following items DIN compatible Install Plate for installing the Receiver in the dashboard of your car or boat 14 ST2 Starmate Replay User and Installation Guide STARMATE r2ejpfny Power Harness for connecting the power for the Receiver to the vehicle s electrical system FM Switching Box for connecting the FM output of the Receiver into the FM antenna input of your vehicle s radio This box will automatically switch off the vehicle s FM antenna when you turn on your SIRIUS Receiver Audio Cables For connecting the audio output of the Receiver into your vehicle s audio system Home Kit STH2 The optional home kit allows you to enjoy the SIRIUS Satellite Radio s digital entertainment in your home by allowing you to take your Receiver from your ve
36. immediately tune to each channel Channel 22 ST2 Starmate Replay User and Installation Guide STARMATE seeplar presets are grouped and displayed by bank and preset number i e A 1 A 2 B 1 B 2 etc Empty presets are not displayed 3 To view the channel presets in the channel list mode where you can view 4 presets at once momentarily press and hold the DISP button for approximately one second until the channel list mode is displayed Repeated momentary pressing and releasing of the DISP button will sequence the display between listings of artist names song titles and back to channel names Note If you are viewing a sports category channel list NFL NBA NHL or COLLEGE pressing the DISP button will instead toggle ST2 Starmate Replay User and Installation Guide 23 between the team names and the current score of any live play by play game 4 To exit the channel list mode press and hold the DISP button for approximately one second until the display reverts to the P TUNE mode 5 To exit the P TUNE mode press and hold the BAND button for approximately 1 second until the default display screen is displayed Memory MEMO and Song Seek S Seek Functions This feature allows you to capture and store information in the Receiver s memory about the currently tuned programming artist song or sports team The Receiver then continuously searches all incoming SIRIUS ch
37. l in any of the list modes Turn Auto Select On if you would like the Receiver to automatically tune to the highlighted channel without you having to press the select button This will allow you to quickly listen to all the available programming in any displayed channel list The default setting for Auto Select is Off meaning that you must press the select button to tune to a channel in a listing 44 ST2 Starmate Replay User and Installation Guide To change Auto Select setting to On or Off use the channel up or down buttons to highlight On or Off and press the select button oer To exit the Auto Select menu press the MENU button Audio Level The Audio Level setting adjusts the level of the audio output of the Receiver To adjust the audio level use the channel up and down buttons to change the audio level The bar graph will move to indicate the change To exit the Audio Level menu press the MENU button STARMATE seeplar Confirmation Tone When access to a locked channel is attempted The Receiver will sound an audio tone alert when it using the direct channel entry method the Enter is powered On or Off as well as when an S Seek Code screen is displayed and the channel cannot alert is activated and other alerts The default setting e accessed until the correct code is entered is On To change the Confirmation Tone setting to On or Off use the channel up or down buttons to highli
38. ly turn the Receiver s power off wait 5 10 seconds then turn the power on again STARMATE seeplar FCC Warning This equipment may generate or use radio frequency energy Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in this User Guide The user could lose the authority to operate this equipment if an unauthorized change or modification is made Note This equipment has been tested and found to comply with Part 15 of the FCC Rules These rules are designed to provide reasonable protection against harmful interference This equipment may cause harmful interference to radio communications if it is not installed and used in accordance with these instructions However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of more of the following measures ST2 Starmate Replay User and Installation Guide Reorient or relocate the receiving antenna Increase the separation between the other equipment and the Receiver Connect the other equipment to a different circuit from that to which the Receiver is connected Consultthe dealer or an experienced radio technician for help A Warning Do not operate the Re
39. me or college team name you Settings wish to add and press the select button The following sections explain each of settings menu options in the order in which they are displayed 40 ST2 Starmate Replay User and Installation Guide STARMATE seeplar To select a menu option use the channel up and down buttons to highlight the option you wish to adjust and press the select button Jump Settings The Jump setting controls the actions of the Jump button The Jump setting menu may also be accessed by pressing and holding the Jump button Two options are available for the Jump setting Traffic and Jump Set The currently selected option is indicated by the Jump icon The Traffic option sets the function of the Jump button to provide a traffic report for a selected city while the JumpSet option assigns any channel to the Jump button ST2 Starmate Replay User and Installation Guide 141 Traffic To set the Jump button to provide a traffic report when pressed do the following 1 Use the channel up and down buttons to highlight the Traffic option and press the select button 2 A screen showing a list of cities will be displayed Use the channel up and down buttons to highlight the city for which you wish to have a traffic report and press the select button 3 If the city list has not yet been updated a message will be displayed indicating th
40. me zone for the clock for your location and turn On or Off the automatic adjustment for Daylight Savings Time DST T Daslight STARMATE seeplar Format To change the clock display format of the Receiver to 12 hour or 24 hour format do the following 1 Use the channel up and down buttons to highlight Clock and press the select button To exit the Time Zone menu press the MENU 2 Use the channel up and down buttons to button highlight either 12 hour or 24 Hour and press Daylight Savings Time the select button To turn the Daylight Savings Time feature On or Off do the following 1 Use the channel up and down buttons to highlight Daylight Savings Time and press the select button 2 Use the channel up and down buttons to H Lic EGMT B3 Mew rid Dred To exit the Clock menu press the MENU button Time Zone highlight DST Observed or DST Not To change the time zone of the Receiver do the Observed and press the select button following 1 Use the channel up and down buttons to highlight Time Zone and press the select button 2 Use the channel up and down buttons to highlight the proper time zone for your location and press the select button ST2 Starmate Replay User and Installation Guide 49 To exit the Daylight Savings Time menu press the MENU button Alarm This feature allows you to set an alarm to sound at a specific time eac
41. mutes the audio Pressing and releasing the Pause Play button causes the Receiver to begin playing the stored audio from the point at which the Receiver was paused During playback the Receiver will continue to store the channel audio until you exit the Instant Replay mode S IRIUS A ELLITE RADIO Pressing and holding the Play Pause button changes the display to a listing of the artist s names in the stored audio from the most recent to the oldest beginning with an entry called Live Pressing the DISP button will toggle the display between the artist name list and the song program title list An item from the list may be chosen and the playback will commence from that point in the stored audio or Live may be chosen which will exit the Instant Replay mode and the Receiver will resume playing the live broadcast Fast Forward button The fast forward button forwards you through the stored audio Pressing and releasing the Fast Forward button forwards to the start of the next song or program in the stored audio and playback automatically begins Repeatedly pressing and releasing the Fast Forward button causes the Receiver to continue to move forward in the stored audio to the start of each next song or program until the end of the stored audio is reached When the end of the stored audio is reached a beep will be heard if the Confirmation Tone option is enabled the Instant Replay mode will be exit
42. on of this manual for instructions on programming the FM frequency preset list Menu Options To enter the Menu Options page of the Receiver press the MENU button The Menu Options list will be displayed To select a menu option use the channel up and down buttons to highlight the option you wish to adjust and press the select button If a selection is not made within 10 seconds the Receiver will exit the menu options screen and revert to the last active display mode To exit the Menu Options screen or any of the other menu option screens repeatedly press and release the MENU key until you are returned to the default display screen The following sections explain each of the menu options in the order in which they are displayed on the Menu Options screen FM Transmitter The FM Transmitter feature allows you to create a preset list of 5 suitable FM frequencies which can then be accessed by using the FM Preset button This option also allows you to turn the FM 38 ST2 Starmate Replay User and Installation Guide transmitter On and Off FM Presets To create or add to alist of FM Preset frequencies do the following 1 Using the channel up and down buttons highlight the FM Presets menu item and press the select button A list of the FM presets will be displayed You may also enter this list by pressing and holding the FM Preset button 2 Using the channel up and down
43. or specific instructions for tuning to a channel 3 Press and hold for 177 seconds the numbered preset button in which you wish to store your favorite channel until you hear a beep The band and preset number will then be displayed in the lower right corner of the display screen to confirm that the channel has been stored Note If the preset button already has a channel stored in it the preset will be replaced by the newly stored channel Using Channel Presets The active band of presets is displayed in the lower right corner of the default display screen A B or C To change the active band momentarily press and release the BAND button to cycle between the preset bands The 10 preset channels in the active band can then be selected by momentarily pressing and releasing the 0 through 9 buttons When you have chosen a preset channel the band and preset number will be displayed in the lower right corner of the default display screen Searching for a Channel Preset P TUNE Mode To quickly search through all of your presets in the P TUNE mode do the following 1 Press and hold the BAND button for approximately 1 second to enter the P TUNE mode Preset Tuning Mode will momentarily be displayed and the top left and lower right corners of the display will invert to indicate the Receiver is in the Preset Tune Mode 2 Use the channel up and down buttons to move up or down through your channel presets and
44. ou did not enter the correct code a message displayed If you entered the wrong code at the will be displayed alerting you that the wrong confirmation prompt a screen will be displayed code was entered and you will be prompted to alert you that you have entered the wrong again to enter the code code and you will have to repeat the process again ST2 Starmate Replay User and Installation Guide To exit the Parental Control menu press the MENU button If you have forgotten your Parental Control code call SIRIUS Customer Service for help Time Based Features These settings allow for adjustment of the following features of the Receiver Clock Sets the clock format time zone and daylight savings time function Alarm Sets an alarm for a specific time Program Alert Sets the Receiver to tune to a specific channel at a specified time Auto Shutdown Sets the Receiver to turn off at a specified time Sleep Mode Sets the Receiver to turn off after a designated period of time 48 ST2 Starmate Replay User and Installation Guide To select a menu option use the channel up and down buttons to highlight the option you wish to adjust and press the select button Clock The time data for the Receiver s clock is provided via the SIRIUS signal and will update based on the data received from the signal You can configure the clock format for 12 hour or 24 hour display format set the ti
45. overpasses etc No sound The audio cables are not connected or the FM radio is set to the wrong frequency Check the audio cables at the Receiver and the vehicle radio Tune the vehicle FM radio to the same FM frequency the Receiver is tuned 56 ST2 Starmate Replay User and Installation Guide STARMATE seeplar Specifications sruduimei m 2322 293 2330 207 MHz Mule 2326 250MHz Power Requirements cccecceceeeeceeceeeeeeeeeeaeeeeeeseaaeeeeeeseseeaeeeeeeseesaeeeees 9 16 Volts Negative Ground DC AUICIO OULDUT p 2V normal 2 8V max Peak to Peak Total Harmonic Distortion THDJ rici iecit enint ent chen hend ten Deren aieiaa sie knee lt 0 2 Signal to noise S N pe Greater than 73dB RIEIALCPDUIPMEEIPE EE 2A ATC Receiver Dimensions Width x Length x Height 128mm x 48mm x 19mm 5 x 1 9 x 75 Receiver Weight s i T U EEEE 112g 4 oz Antenna Type tsosa e a a oO O Aad Low Profile Magnetic Antenna Cable Length isisisi aiaiai 21 single micro cable Connector Type sissies SMB right angle Audio Interface fcc cacd seeded e beo Rr p ERR Rt MEI Ei PE 1 8 3 5mm Stereo Jack uen ER 2 5mm Jack Remote Control Dimensions Width x Length x Height sss
46. ovide a visual indication of your current position in the Instant Replay memory When the Instant Replay memory is 10 seconds from becoming full two beeps will be heard if the Confirmation Tone option is enabled When the memory is full the Receiver will automatically begin playback and will continue to store the channel audio overwriting the oldest portion of the audio previously stored When the memory is full you will be unable to rewind through the stored audio If you have partially played back the stored audio and have paused the Receiver again the Play Position indicator will begin to move left when the Instant Replay memory becomes full as it begins overwriting the oldest portion of the audio previously stored When the Play Position indicator reaches 36 ST2 Starmate Replay User and Installation Guide the left most position indicating that the memory is full the Receiver will automatically begin playback Time Position of Play Position Indicator Y Play Position Indicator The Instant Replay Time Position provides the exact amount of time the Play Position indicator is behind the live broadcast expressed as Hours Minutes Seconds and displayed as a negative number For example if 02 40 is displayed this would indicate that the Play Position indicator is 2 minutes and 40 seconds behind the live broadcast STARMATE seeplar FM Preset Button The Receiver has a special button called the FM P
47. r call Product Support at 1 800 869 5590 proof of purchase and description of defect are required Products to be returned to an approved warranty station must be shipped freight prepaid 58 ST2 Starmate Replay User and Installation Guide STARMATE r2ejpfny Please record the SIRIUS ID SID in the space provided below SIRIUS ID SIRIUS 4 SATELLITE RADIO SIRIUS Customer Service 1 888 539 7474 SIRIUS Product Support 1 800 869 5590 customercare sirius radio com ST2 Starmate Replay User and Installation Guide 59 SIRIUS SATELLITE RADIO SIRIUS Satellite Radio Inc 1221 Avenue of the Americas New York NY 10020 1 888 539 7474 www sirius com E ST2 082406a
48. red memory list to ensure that the alert about to be stored is not already stored in memory If a duplicate entry is found an Unable to Store screen will be displayed for 1 second The Receiver will then revert to the last active display mode 4 If the new alert was successfully stored in memory a Artist Song Game Stored pop up screen followed by an X Used Y Empty screen will be displayed for 1 and 2 seconds respectively X is the total number of listings stored in memory and Y is the total number of memory listings still available for storage 26 ST2 Starmate Replay User and Installation Guide 5 If the MEMO button is pressed and all of the memory spaces are full an S Seek Full screen will be displayed for 1 second aul H A Replace or Cancel screen will then be displayed which will allow you to choose whether to replace an existing alert stored in memory or to cancel storing the alert to memory Using the channel up and down buttons choose whether to replace an existing alert or cancel saving the alert to memory If you choose to cancel saving the alert the Receiver will revert to the last active display mode If you have chosen to replace an existing alert a listing of all the alerts stored in memory will be STARMATE seeplar displayed Viewing Stored Alerts Stored in Memory To view the alerts which have been saved to memory press and hold the MEMO button for
49. reset button which is identified by the icon When the FM Preset button is pressed the Receiver turns on the built in FM transmitter and begins transmitting on the next frequency from the FM frequency preset list Ascreen will be displayed for 3 seconds showing the currently selected FM frequency When the FM transmitter is turned on an FM radio tuned to the same FM frequency will receive the currently tuned SIRIUS broadcast Each subsequent press of the FM Preset button advances to the next frequency in the FM frequency preset list Using the FM Preset button a quiet FM frequency may be quickly tuned If no FM frequencies have been preset when the FM Preset button is pressed the Receiver will default to a frequency of 88 1 MHz Pressing and holding the FM Preset button will cause a list of the FM presets to be displayed ST2 Starmate Replay User and Installation Guide You can use the channel up and down buttons to scroll through the FM preset list and highlight the preset you wish to change and press the Select button to choose the preset Use the channel up and down buttons to highlight the frequency you wish to select for the preset and press the select button The FM frequency will then be stored in the preset To select the preset and exit press the MENU button You may also change the FM presets by using the FM Presets menu option of the Receiver Refer to the FM Transmitter section in the Menu Options secti
50. s and press the select button to tune to the channel The new channel will begin playing and the display will revert to the default display screen for the new channel To exit the channel list mode without changing to a different channel press and hold the DISP button for 172 seconds until the default screen is displayed Selecting Channels Directly A channel may be directly selected by entering the channel number using the 0 9 buttons on the Receiver To enter a channel number momentarily press and release the select button At the display prompt enter the three digit channel number ST2 Starmate Replay User and Installation Guide Advanced Features Channel Presets BAND You can store up to 30 of your favorite channels as presets for quick recall access The preset channels are stored in 3 bands A B and C each containing 10 channel presets and are numbered 0 to 9 The 10 channel presets in each band are accessed by pressing the appropriate number 0 to 9 on the Receiver A momentary press and release of the BAND button cycles through the 3 preset bands A B and C Storing Channel Presets To store a favorite channel as a preset do the following 1 Momentarily press and release the BAND button until the desired preset band A B or C is displayed in the lower right corner of the default display screen 2 Tune the Receiver to the channel you wish to store as a preset See the section Basic Operation f
51. shandling misuse neglect accident or by removal or defacement of the factory serial number bar code label s THE EXTENT OF THE COMPANY S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND IN NO EVENT SHALL THE COMPANY S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT This Warranty is in lieu of all other express warranties or liabilities ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 48 MONTHS FROM DATE OF ORIGINAL PURCHASE IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY EXPRESS OR IMPLIED WHATSOEVER No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you This Warranty gives you specific legal rights and you may also have other rights which vary from state to state WARRANTY RETURN To obtain repair or replacement within the terms of this Warranty please return product to an authorized retailer o
52. sss 41mm x 104mm x 15mm 1 61 x 4 09 x 59 Remote Control Battery Requirements ssssssssseseseeeeeeeen nennen nennen enne CR2025 Note Features and Specifications subject to change without notice ST2 Starmate Replay User and Installation Guide SATELLITE RADIO 12 MONTH LIMITED WARRANTY SIRIUS Satellite Radio Inc the Company warrants to the original retail purchaser of this product that should this product or any part thereof under normal use and conditions be proven defective in material or workmanship within 12 months from the date of original purchase such defect s will be repaired or replaced with new or reconditioned product at the Company s option without charge for parts and repair labor To obtain repair or replacement within the terms of this Warranty the product is to be delivered with proof of warranty coverage e g dated bill of sale specification of defect s transportation prepaid to the location shown below under WARRANTY RETURN This Warranty does not extend to the elimination of externally generated static or noise to correction of antenna problems to costs incurred for installation removal or reinstallation of the product or to damage to tapes compact discs speakers accessories or vehicle electrical systems This Warranty does not apply to any product or part thereof which in the opinion of the Company has suffered or been damaged through alteration improper installation mi
53. tant Replay memory is erased and the tuned channel begins to play Also note that tuning to another channel may automatically occur if another feature of the Receiver has been programmed to do so When the Instant Replay mode is active status information is shown at the bottom of the Receiver s display screen The Instant Replay mode icon that is displayed at the bottom left of the screen indicates the current mode Il Pause mode This indicates that the Receiver is paused and muted gt Play mode This indicates that you are in the Instant Replay playback mode listening to stored audio gt gt Fast Forward mode This indicates that you are fast forwarding through the stored Instant Replay audio 34 ST2 Starmate Replay User and Installation Guide 44 Rewind mode This indicates that you are rewinding or moving backwards through the stored Instant Replay audio Instant Replay Time Position A Progress Bar Play Position Indicator Instant Replay Mode The Progress Bar is a visual indicator of the status of the Instant Replay memory As the memory fills Progress Bar begins to fill from the left side providing a visual indication of how much of the Instant Replay memory is filled The end of the bar indicates the end of the stored audio where the live broadcast begins When all available memory has STARMATE seeplar been used the bar will be completely filled Progress Bar Showing Amount of Memory Filled
54. the channel up and down buttons to highlight Time and press the select button 3 Use the channel up and down buttons to change the minutes and the category previous and next buttons to change the hours to select the time ST2 Starmate Replay User and Installation Guide 51 you wish to tune to the specified channel 4 When you have selected the desired time press the select button to set the time and exit 5 Atthe Program Time Day screen use the channel up and down buttons to highlight Day and press the select button 6 Using the channel up and down buttons select the day of the week you wish to tune to the selected channel i e Monday Tuesday etc and press the select button To exit the Program Time Day menu press the MENU button SATELLITE RADIO Channel Number To set the channel to which the receiver will tune when the Program Alert feature is On do the following 1 Use the channel up and down buttons to highlight Channel Number and press the select button 2 When the default display screen is displayed use the channel up and down buttons to navigate to the channel which you wish to select for the Program Alert feature Use the category previous and next buttons to navigate between categories When the channel is displayed press the select button To exitthe Channel Number menu press the MENU button Program Alert On Off To turn the Program Alert fea
55. ture is On or Off do the 52 ST2 Starmate Replay User and Installation Guide following 1 Use the channel up and down buttons to highlight Program Alert On Off and press the select button 2 Use the channel up and down buttons to highlight Program Alert On or Program Alert Off and press the select button To exit the Program Alert On Off menu press the MENU button Auto Shutdown You can set the Receiver to automatically power off after a 1 hour period of inactivity that is no buttons have been pressed for 1 hour When the Auto Shutdown feature is enabled after 59 minutes of inactivity a beep tone will sound anda display prompt will appear on the screen Cancel Auto Shutdown At this point the auto shutdown can be reset to 1 hour of inactivity by pressing the select STARMATE seeplar button If the Auto Shutdown is not reset the Receiver will automatically power off To enable or disable the Auto Shutdown feature do the following 1 Use the channel up and down buttons to highlight Auto Shutdown and press the select button 2 Use the channel up and down buttons to highlight Enabled or Disabled and press the select button To exit the Auto Shutdown menu press the MENU button Sleep Mode The Receiver can be set to turn off automatically ST2 Starmate Replay User and Installation Guide after a selected period of time 15
56. uide channels until you activate your SIRIUS subscription To listen to the audio from your Receiver you will need to tune the FM radio in your vehicle and the FM transmitter in the Receiver to the same FM frequency The FM transmitter in the Receiver defaults to 88 1 MHz so you can begin by tuning your FM radio to 88 1 MHz If there is an FM station broadcasting on that frequency you will have to search for a quiet frequency to use Referto the section titled FM Transmitterin this User Manual for instructions on how to tune the FM transmitter to other FM frequencies 5 Use the channel up and down buttons to tune the Receiver to channel 000 to display the Receiver s unique 12 digit SIRIUS ID Number SID You may also directly tune to channel 000 by pressing the Select button pressing the 0 zero button and pressing the Select button again You may do this from either the Receiver or the remote control This SID number is also available on the ST2 packaging Write the SID number down in the space provided at the end of this manual 6 Have your credit card handy and contact SIRIUS on the Internet at https activate siriusradio com and follow the prompts to activate your subscription You can also call SIRIUS toll free at 1 888 539 SIRIUS 1 888 539 7474 7 When you have successfully subscribed to the SIRIUS service and the Receiver has been updated with your subscription information an alert w
57. vorite sports teams is found a Game Alert screen is displayed followed by a screen displaying tuning information for the sports games You can then use the channel up and down buttons to highlight your favorite sports team in the list and then press the select button to tune to the channel where the game is being broadcast Refer to the Game Alert section in the Menu Options section of this manual for instructions on programming your favorite sports teams into the Receiver You can also use the S Seek feature to add Game Alerts for sports teams See the section Storing Artist Names Song Titles and Sports Teams to Memory for more information ST2 Starmate Replay User and Installation Guide Instant Replay The Receiver has a feature called Instant Replay which stores the audio of the channel to which you are listening for later playback Approximately 30 to 60 minutes of audio depending upon the channel to which you are tuned is stored As soon as you tune to a channel the Receiver automatically begins storing the audio enabling you to rewind at any time to replay the audio again If you unable to continue listening to a channel but do not want to miss the broadcast pressing the Play Pause button will cause the Receiver to mute the audio and mark the point in the broadcast so you can resume listening ata later time Pause Play button When pressed this places the Receiver in the Instant Replay pause mode which
Download Pdf Manuals
Related Search