Saeco Intelia Deluxe HD8759/47 Espresso Machine User Manual
Contents
1. Always here to help you Register your product and get support at www saeco com welcome rel Deluxe HD8759 47 Saeco 4219_460_3143_1_DFU Simple_A5_v2 indd 1 D 13 10 15 10 57 English 5 Contents Introduction Important safeguards Caution Instructions for the power supply cord General description Important Warning Caution Electromagnetic fields EMF The display First installation anual rinsing cycle Water filter nstalling the water filter Replacing the water filter Measuring the water hardness Using the machine Brewing coffee with beans Brewing coffee with pre ground coffee Adjusting the coffee quantity Adjusting the grind setting Frothing milk Hot water Descaling Descaling procedure nterruption of the descaling cycle Cleaning and maintenance Weekly cleaning of the brew group Lubrication Automatic milk frother cleaning daily Automatic milk frother cleaning monthly Warranty and support Ordering maintenance products Disposal Warning icons and error codes Meaning of error codes Troubleshooting Introduction English O O Oo o NN 4a u si La 2200 ae N SA N N 0 0 0 JN DU NA WW ww N N oo N O N Yo N N 5 Congratulations on buying this Intelia Intelia Deluxe full automatic espresso machine The machine is suitable for preparing espresso coffee using whole English 6 English coffee beans To fully b2. Installing the water filter 1 Remove the small white filter from the water tank and store it in a dry place ote Please keep the small white filter for future use You will need it for he descaling process 2 Remove the filter from its packaging and immerse it in cold water with the opening pointing upwards Press the sides of the filter gently to let out he air bubbles 3 Place the filter in the empty water tank Press it down until it cannot move any further 4 Fill the water tank with fresh water up to the MAX indication and place it he machine 5 Selectthe hot water function and dispense hot water until the water tank is empty see chapter Using the machine section Brewing special drinks 6 Refill the water tank with fresh water up to the MAX indication and place it back into the machine 7 Press the MENU button to enter the menu 8 Press the DOWN button until the display shows the following icon CN WATER FILTER 9 Pressthe UP button to select ON and press the OK button to confirm 10 Press the ESC button The filter and machine are now ready for use Replacing the water filter D The display shows the following icon to indicate the water filter needs to UP Ny be replaced y 1 Replace the filter as described in section Installing the water filter 2 Press the MENU button and press the UP DOWN button to scroll trough the options on the menu until the following icon is displayed 3
3. this takes approximately 25 minutes 10 Wait until all of the descaling solution has been dispensed Remove and empty the container 11 Remove and empty the drip tray Slide the drip tray back into the machine 12 Rinse the water tank and fill it with fresh water up to the CALC CLEAN indication Slide the water tank back into the machine 13 Place the container back under the steam wand and dispensing spout 14 Press the OK button to start the rinsing cycle this takes approximately 4 minutes ui The display shows the following icon to indicate that the rinsing cycle is CLEAN inished y 15 The display shows a tick icon Press the OK button to return to the main menu 16 Rinse the water tank and fill it with fresh water up to the MAX level Put he water tank back into the machine 17 Press the OK button to end the descaling cycle 18 Place a container under the steam wand and dispensing spout 19 The display shows the following icon to indicate that the machine is N heating up u The machine performs an automatic rinsing cycle 20 Remove the container Remove and empty the drip tray Slide the drip tray back into the machine 21 Place the water filter back in the water tank Reinsert the automatic milk frother 22 Remove and rinse the brew group see chapter Cleaning and maintenance section Clean the brew group The machine is now ready for use Interruption of the descaling cycle Once the d
4. 8 Press the MILK FROTH button 9 Youcan press OK to stop or let the machine dispense until it stops automatically 10 Remove the automatic milk frother from the steam wand Remove the rubber grip from the steam wand The steam wand can be hot after use 11 Remove the suction tube 12 Remove the automatic milk frother by pressing on the sides 13 Remove the rubber lid 14 Rinse the components with lukewarm water 15 Press in the middle to attach the lid and make sure it is in place 20 English 16 Attach the automatic milk frother to the fitting and make sure it is locked into place 17 Attach the suction tube 18 Insert the rubber grip back on the steam wand Insert the automatic milk frother on the rubber grip until it locks into place Warranty and support If you need information or support please visit www saeco com support or read the separate worldwide guarantee leaflet To buy spare parts visit www shop philips com service or go to your Saeco dealer or authorized service center You can also contact the Philips Saeco hotline in your country Ordering maintenance products MAVEA CA6702 Descaling solution CA6700 Disposal This product may contain lead and mercury Disposal of these materials may be regulated due to environmental considerations For disposal or recycling information please contact your local authorities or visit www recycle philips com Warning icons and error codes Warni
5. Select the RESET option and press the OK button to confirm 4 Press the ESC button to exit RESET If the filter is already installed and you want to remove it and not replace it choose OFF 12 English Measuring the water hardness To be able to adjust the machine settings to the water in your region please measure the water hardness with the water hardness strip supplied 1 Immerse the water hardness test strip supplied with the machine in fresh water for 1 second Remove the water hardness strip and and wait for 1 minute Check how many squares have changed into the red color and check the water hardness in below table numbers of red squares value to be set water hardness 1 1 very soft water 2 2 soft water 3 3 hard water 4 4 very hard water Setting the water hardness 1 w To set the water hardness press the MENU button select menu and scroll to select water hardness Press the OK button and select the water hardness in your area Press the OK button to confirm Press the ESC button to return to the main menu Using the machine Brewing coffee with beans 1 2 3 Adjust the coffee dispensing spout to suit the size of your cup Press the AROMA STRENGTH button to select the desired coffee strength from 1 5 beans Press the ESPRESSO button to brew an espresso or press the ESPRESSO LUNGO button to brew a coffee English 13 Brewing coffee with pre ground coffee When yo
6. in this table contact the Philips Saeco hotline IL LIU i i www saeco com welcome 4219 460 3143 1 REVOO 4219 460_3143_1_Book_Simp_A5_v2 indd 80 amp 12 10 15 15 33
7. of the detachable power supply cord or extension cord should be at least as great as the electrical rating of the appliance 2 If the appliance is of the grounded type the extension cord should be a grounding type 3 wire cord and 3 The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over General description Important 1 Coffee bean hopper lid 2 Coffee bean hopper 3 Power cord socket 4 Water tank 5 Pre ground coffee compartment 6 Grinder adjustment knob 7 Control panel 8 Coffee grounds container 9 Coffee dispensing spout O Drip tray 1 Drip tray cover 2 Drip tray full indicator 3 Espresso button 4 Espresso lungo button 5 Aroma strength button 6 Standby button 7 Menu button 8 Hot water button 9 Milk froth button 20 Power supply cord 21 Cleaning brush for specific types only 22 Grease for the brew group for specific types only 23 Pre ground coffee measuring spoon 24 Water hardness test strip 25 Coffee residues drawer 26 Brew group 27 Hot water steam dispensing spout 28 Automatic milk frother Read and follow the safety instructions carefully and only use the machine as described in this user manual to avoid accidental injury or damage due to improper use of the machine Keep this user manual for future reference 8 English Warning Caution Check if the voltage indicated on the machine correspond
8. the grinder to a coarser setting The brew group is dirty Clean the brew group The coffee exit duct is blocked Clean the coffee exit duct with the handle of the multifunctional tool or a spoon handle The machine circuit is blocked by limescale Descale the machine The milk does not froth The automatic milk frother is dirty or not assembled or installed correctly Clean the automatic milk frother and make sure it is correctly assembled or installed The type of milk used is not suitable for frothing Different types of milk result in different amounts of froth and different froth qualities Semi skimmed or full fat cow s milk give good results You did not replace the filter when the filter symbol started flashing The filter does not fit You need to remove air from the filter Let air bubbles come out of the filter English 25 There is still water in the water Empty the water tank before you tank install the filter There is water under the The drip tray is too full and Empty the drip tray when the drip tray machine overflowed full indicator pops up through the drip ray Always empty the drip tray before you start descaling the machine The machine is not placed ona Place the machine on a horizontal horizontal surface surface so that the drip tray full indicator works properly Note If you are unable to solve the problem with the information
9. years and above and supervised Keep the appliance and its power supply cord out of reach of children aged less than 8 years Do not spill water on the power plug Only use the machine as described in the user manual to avoid potential injury due to misuse Never insert fingers or other objects into the coffee grinder As water is a foodstuff the water in the water tank must be used up within 1 to 2 days If you are not going to use your coffee machine for a prolonged period e g a holiday we recommend that you discard any water left inside the tank Before you use the coffee machine again clean the water tank and perform a manual rinsing cycle Do not put any of the detachable parts of the machine in the dishwasher except for the milk carafe English 9 The machine is for household use only It is not intended for use in environments such as canteens staff kitchen of shops offices farms or other work environments Always put the machine on a flat and stable surface Do not place the machine on hot surfaces directly next to a hot oven heater or similar source of heat Only put roasted coffee beans into the coffee bean hopper If ground coffee instant coffee raw coffee beans or any other substance is put in he coffee bean hopper it may damage the machine Let the machine cool down before inserting or removing any parts ever use warm or hot water to fill the water tank Use cold non sparkling drinking water ever
10. Coarse grind lighter taste for dark roasted coffee blends Fine grind bolder taste for light roasted coffee blends Place the coffee bean hopper back Brew 2 3 coffees to taste the difference Warning Danger of scalding Only grab the steam wand by its protective handle Dispensing may be preceded by small jets of hot water 14 English 1 Insert the suction tube into the automatic milk frother 2 Insertthe automatic milk frother on the rubber grip until it locks into place 3 Insert the suction tube into the milk pitcher 4 Place a cup on the drip tray under the automatic milk frother and press the MILK FROTH button The machine dispenses the frothed milk directly into the cup 5 Pressthe OK button to stop frothing Hot water Warning Danger of scalding Only grab the steam wand by its protective handle Dispensing may be preceded by small jets of hot water English 15 1 Remove the automatic milk frother from the steam wand 9 O DD GEST a 2 Place a container under the steam wand 3 Press the HOT WATER button Hot water dispensing starts automatically 4 Press the OK button to stop hot water dispensing Remove the container 2 wa gt NS Descaling You have to descale the machine when the display shows the CALC CLEAN icon If you do not descale when the display shows the CALC CLEAN icon the machine may stop working properly In this case repairs are not covered by via t
11. clean with scrubbing powders or harsh cleaners Simply use a soft cloth dampened with water Descale the machine regularly The machine indicates when descaling is needed If you do not clean and descale the machine you run the risk hat the machine stops working and that your guarantee becomes invalid Do not keep the machine at temperatures below 32 F Water left in the heating system may freeze and cause damage Do not leave water in the tank when the machine is not used over a long period of time The water can get contaminated Use fresh water every ime you use the machine Electromagnetic fields EMF This machine complies with all applicable standards and regulations regarding exposure to electromagnetic fields The display D Some buttons can be used to navigate through the menus ESPRESSO button ESC button you can press this button to return to the main menu The ESC button takes you back one level You may have to press the ESC button several times to get back to the main menu AROMA STRENGTH button OK button you can press this button to select confirm or stop a function MILK FROTH button UP button press this button to scroll up through the display menu 10 English MENU button DOWN button press this button to scroll down through the d First installation UAWN on 0 un ide ill th ill th TI Press Press 10 Fill th 11 isplay menu the drip tray with drip tray cove
12. e has too little crema or is watery The grinder is set to a coarse setting Adjust the grinder to a finer setting The brew group is dirty Clean the brew group For thorough cleaning follow the monthly cleaning procedure with the degreasing tablet 24 English The coffee exit duct is dirty Clean the coffee exit duct thoroughly with the handle of the multifunctional tool or a spoon handle The coffee blend is not the correct one Try another coffee blend The machine is performing its self adjustment Brew a few cups of coffee The coffee is not hot enough The cups you use are cold Preheat the cups by rinsing them with hot water The temperature is set too low Check the menu settings Set the temperature to high in the menu You added milk Whether the milk you add is warm or cold it will always decrease the temperature of the coffee to some extent The machine grinds the coffee beans but coffee does not come out The grind is set too fine Adjust the grinder to a coarser setting The brew group is dirty Clean the brew group The coffee dispensing spout is dirty Clean the coffee dispensing spout and its holes with a pipe cleaner The coffee exit duct is blocked Clean the coffee exit duct with the handle of the multifunctional tool or a spoon handle The coffee comes out slowly The grind is ground too finely Change
13. enefit from the support that Saeco offers please register your product at www saeco com welcome This user manual applies to all Intelia Intelia Deluxe models with automatic milk frother Important safeguards Caution When using electrical appliances basic safety precautions should always be followed including the following 1 Read all instructions 2 Do not touch hot surfaces Use handles or knobs 3 To protect against fire electric shock and injury to persons do not immerse cord plugs or appliance in water or other liquid 4 Close supervision is necessary when the appliance is used by or near children 5 Unplug from outlet when not in use and before cleaning Allow to cool before putting on or taking off parts and before cleaning the appliance 6 Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner Return appliance to the nearest authorized service facility for examination repair or adjustment 7 Theuse of accessory attachments not recommended by the appliance manufacturer may result in fire electric shock or injury to persons 8 Do not use outdoors 9 Do not let cord hang over edge of table or counter or touch hot surfaces 10 Do not place on or near a hot gas or electric burner or in a heated oven 11 Always attach plug to appliance first then plug cord into wall outlet To disconnect turn any control to off then remove plug from wal
14. escaling cycle has started you must complete it till the very end without turning off the machine In case you get stuck during the cycle or in case of power failure or accidental disconnection of the power cord you can exit by pressing the standby button If this occurs empty and rinse carefully the water tank then fill it up to the CALC CLEAN level Follow the instructions in chapter First installation section Manual rinsing cycle English 17 before brewing any beverage If the cycle was not completed the machine will require another descaling cycle to be performed at your earliest convenience Cleaning and maintenance Weekly cleaning of the brew group Clean the brew group once per week 1 Remove the coffee grounds container and open the service door 2 Remove the coffee residues drawer 3 To remove the brew group press the lever and pull the brew group out of the machine 4 Rinse the brew group with fresh water and let it air dry 5 To place the brew group back make sure that the lever is in contact with the base of the brewing unit Note If it is not in contact with the base push it down 6 Make sure the locking hook of the brew group is in the correct position To position the hook correctly push it upwards until it is in uppermost position 18 English Lubrication The hook is not correctly positioned if it is still in bottommost position Slide the brew group back into the machine alon
15. g the guiding rails on the sides until it clicks into position Then place the coffee residues drawer back in the machine Lubricate the brew group after approximately 500 cups of coffee or once a month 1 Apply some lubricant around the shaft in the bottom of the brewing unit Apply lubricant to the rails on both sides as shown in the illustration Slide the brew group back into the machine along the guiding rails on the sides until it clicks into position Then place the coffee residues drawer back in the machine Automatic milk frother cleaning daily 1 2 3 Plunge the suction tube into a pitcher filled with fresh water Place an empty container under the automatic milk frother Press the MILK FROTH button When the water that flows out of the automatic milk frother is clean press the ESC button to stop the dispensing Automatic milk frother cleaning monthly 1 UAWN Pour the contents of a Saeco milk circuit cleaning sachet into a pitcher Add a half litre of water Insert the suction tube into the pitcher Place a container under the automatic milk frother Press the MILK FROTH button You can press OK to stop or let the machine dispense until it stops automatically English 19 6 Rinse the pitcher with fresh water and fill it with a half litre of fresh water for the rinsing cycle Empty the container and place it back under the automatic milk frother 7 Insert the suction tube into the pitcher
16. he warranty V CALC CLEAN lt lt Never drink the water with descaling mixture that you pour into the water tank or any water with residues that comes out of the machine during the descaling procedure The descaling procedure lasts approximately 30 minutes Only use the Saeco descaling solution to descale the machine The Saeco descaling solution is designed to ensure optimal performance of the machine Descaling procedure Il You can pause the descaling or rinsing cycle by pressing the ESC button The display will show the following icon To continue the descaling or rinsing CALC cycle press the OK button CLEAN 1 Remove and empty the drip tray Slide the drip tray back into the kk machine 2 Remove the water filter from the water tank if present Remove the automatic milk frother from the steam wand 4 Press the OK button w 16 English 5 The display shows the following icon to indicate that the machine enters the descaling cycle If you want to exit the descaling cycle press the ESC button 6 Pour the entire bottle of Saeco descaling solution 250ml into the water tank 7 Add water to the descaling solution in the water tank up to the CALC CLEAN indication 8 Place a large container 1 5 l under the steam wand and dispensing spout 9 Press the OK button to start the descaling cycle The machine dispenses the entire descaling solution at regular intervals through the steam wand and dispensing spout
17. l outlet 12 Do not use appliance for other than intended use SAVE THESE INSTRUCTIONS This appliance is for household use only Any servicing other than cleaning and user maintenance should be performed by an authorized service center Do not immerse machine in water To reduce the risk of fire or electric shock do not disassemble the machine There are no parts inside the machine serviceable by the user Repair should be done by authorized service personnel only 1 Check voltage to be sure that the voltage indicated on the nameplate corresponds with your voltage 2 Never use warm or hot water to fill the water tank Use cold water only 3 Keep your hands and the cord away from hot parts of the appliance during operation 4 Never clean with scrubbing powders or harsh cleaners Simply use a soft cloth dampened with water 5 For optimal taste of your coffee use purified or bottled water Periodic descaling is still recommended every 2 3 months 6 Donot use caramelized or flavored coffee beans English 7 Instructions for the power supply cord A short power supply cord or detachable power supply cord is to be provided to reduce risks resulting from becoming entangled in or tripping over a longer cord Longer detachable power supply cords or extension cords are available and may used if care is exercised in their use If along detachable power supply cord or extension cord is used 1 The marked electrical rating
18. ng signals are displayed in red Below you find a list of the warnings that may appear on the display and their meaning English 21 Fill the water tank with fresh water to the MAX level indication The bean hopper is empty Put new coffee beans in the bean hopper The brew group is not in the machine Insert the group Close the service door Remove the coffee grounds container and empty it 22 English There is too much powder in the brew group Clean the brew group If an error code is triggered check the section Meaning of error codes to see what the code on the display means and what you can do The machine cannot be used when this icon is on the display You forgot to place the lid on the pre ground coffee compartment If you do not place it back within 30 seconds the display will return to the main menu and the brewing cycle will be stopped Meaning of error codes Error code Problem Cause Possible solution 1 Coffee grinder blocked Coffee exit duct Clean the coffee exit clogged duct thoroughly with the handle of the multifunctional tool ora spoon handle 3 4 The brew group cannot The brew group is not Close the maintenance be removed positioned correctly door Switch the machine off and back on again Wait for the machine ready icon on the display and then remove the brew group 5 Water circuit problem There is air in the water Remove and place back circuit the
19. r into the machine Remove the water tank e water tank to the MAX level with fresh water e coffee bean hopper with coffee beans nsert the small plug into the socket located on the back of the machine nsert the power plug into the electrical outlet Place a container under the hot water steam dispensing spout the STANDBY button the OK button to start the automatic circuit priming cycle The machine performs an automatic rinsing cycle Remove the water tank from the machine and empty it e water tank with fresh water and place it back into the machine Continue with the next step the manual rinsing cycle Manual rinsing cycle Water filter 1 2 3 Place a container under the coffee dispensing spout Press the AROMA STRENGTH button to select pre ground coffee Do not add pre ground coffee Press the ESPRESSO LUNGO button The machine starts dispensing water When the machine stops dispensing empty the container Repeat steps 1 3 twice Place a container under the steam wand Press the HOT WATER button Hot water dispensing starts automatically Dispense water until the display shows the no water icon Fill the water tank with fresh water up to the MAX level and remove the container The machine is ready for use The MAVEA water filter is designed to reduce limescale deposits in your coffee machine and provide filtered water to persevere the aroma and flavor of each cup of coffee English 11
20. s to the local voltage before you connect the machine Connect the machine to a grounded wall outlet Do not let the power supply cord hang over the edge of a table or counter or touch hot surfaces ever immerse the machine power plug or power supply cord in water danger of electrical shock Do not pour liquids on the power supply cord connector ever direct the hot water jet towards body parts danger of burns Do not touch hot surfaces Use handles and knobs Remove the power plug from the wall outlet f a malfunction occurs f the machine will not be used for a long time Before cleaning the machine Pull on the power plug not on the power supply cord Do not touch the power plug with wet hands Do not use the machine if the power plug the power supply cord or the machine itself is damaged Do not make any modifications to the machine or its power supply cord Only have repairs carried out by a service center authorized by Philips to avoid a hazard The machine should not be used by children younger than 8 years old This machine can be used by children aged from 8 years and above and persons with reduced physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the machine in a safe way and understand the hazards involved Children shall not play with the machine Cleaning and user maintenance shall not be made by children unless they are 8
21. the machine is switched off the coffee cycle counter is not reset In that case the empty coffee grounds container message will stay on the display even though the container is not full The coffee grounds container was placed back too fast Do not place back the coffee grounds container until the screen message prompts you to put it back The brew group cannot be removed The brew group is not positioned correctly Close the maintenance door Switch the machine off and back on again Wait for the machine ready screen to appear and then remove the brew group The coffee grounds container is not removed Remove the coffee grounds container before removing the brew group The machine is still in the descaling process You cannot remove the brew group when the descaling process is active First complete the descaling process and then remove the brew group The brew group cannot be inserted The brew group is not in the correct position The brew group was not put in rest position before it was placed back Make sure that the lever is in contact with the base of the brew group and that the hook of the brew group is in the correct position Reset the machine by switching it on and off Place the drip tray and the coffee grounds container back Leave the brew group out Close the maintenance door and switch the machine on and off Then try to reinsert the brew group The coffe
22. u brew coffee with pre ground coffee use the measuring scoop in the multifunctional tool supplied to put the correct dose in the pre ground coffee compartment If you add more pre ground coffee the excess coffee will end up in the coffee grounds drawer 1 2 Open the lid of the pre ground coffee compartment Pour one measuring scoop of pre ground coffee into the compartment Caution Do not put any other substance than pre ground coffee in the pre ground coffee compartment as this may damage the machine A Place the lid back on the pre ground coffee compartment Place a cup under the coffee dispensing spout Press the AROMA STRENGTH button to select pre ground coffee The machine automatically starts brewing coffee Note You can only brew one coffee beverage at a time with pre ground coffee Adjusting the coffee quantity 1 2 Press and hold the ESPRESSO button or ESPRESSO LUNGO button until the display shows the word MEMO When the cup contains the desired amount of coffee press the OK button to save the selected quantity Adjusting the grind setting Frothing milk 1 2 Open the coffee bean hopper Place the end of the measuring spoon handle on the grinder adjustment knob in the coffee bean hopper Use the spoon to press and turn the knob to the left or to the right one notch a time There are 10 different grinding degree settings you can choose from The smaller the dot the stronger the coffee
23. water tank a couple of times Make sure you insert it into the machine properly Check if the water tank compartment is clean Other error codes Switch the machine off and switch it back on again after 30 seconds Try this 2 or 3 times If the above solutions do not help to remove the error code icon from the display and bring the machine back to normal working order contact the Philips Saeco hotline Contact details can be found in the warranty booklet or on www saeco com support Troubleshooting Problem Cause Solution The machine does not turn on The machine is disconnected English 23 Check if the power supply cord is inserted correctly The machine is in DEMO mode The standby button has been pressed for more than 8 seconds Switch the machine off and then on again The drip tray is quickly filled This is normal The machine uses water to rinse the internal circuit and brew group Some water flows through the internal system directly into the drip tray Empty the drip tray when the drip tray full full indicator pops up through the drip tray cover Place a cup under the dispensing spout to collect rinsing water The coffee grounds container full icon remains displayed The coffee grounds container was emptied while the machine was switched off Always empty the coffee grounds container while the machine is ON If the coffee grounds container is emptied while
Download Pdf Manuals
Related Search