CCT-3102BTFX USER MANUAL - Connection Technology Systems
Contents
1. Act Figure 2 CVT 3002 PLUS WDM amp SFP Front Panel Figure 3 CVT 3002 PLUS Converter Rear Panel 4 DIP SWITCH Setting The default setting for PIN 1 and 6 is ON The rest of Pins are OFF Pin NO Function OFF ON 6 FlOmode Force Auto a pe mode forward NOTE 1 Before changing TP speed duplex mode and flow control setting please make sure PIN 1 is set to OFF 2 When TP speed is set to 10M or 100M manually PIN 3 needs to be turned OFF 3 Under 1000Mbps it supports full duplex mode only 4 When Pin 8 is set to ON and the TP speed to 1000M full duplex mode and flow control are disabled 5 LED Description Fiber Transceiver Information LED Color Function 1000M Lit when power is available Lit when TX cable connection with Multi Mode E Crenn o TYPE BTFC Link ag Connector Type CONNECTION TECHNOLOGY SYSTEMS Typical Distance 500m remote device is good Blink when TX traffic is present Lit when Fiber cable connection with Green remote device is good Link Blink when F O traffic is present CVT 3002 PLUS SERIES Lit when TX works in Full Duplex Not Lit when TX works in Half Duplex ames Soe ana EE Speed Lit when TX works in 100M Orange Single Mode e TPE BTFC SM 10 BTFC SM 20 BTFC SM 30 10 100 1000BASE T to 6 Technical Specifications 1000BASE X Standalone Wavelength 1310nm 1310nm 1310nm ee a Typical Distance okm 20m f aom media Gonvertat OZ Interface 12. X 10 100 1000 RJ 45 connector Min TX PWR 9 5dBm 5 0dBm 5 0dBm 1 X 1000 F O port or SFP Slot Max TX PWR 3 0dBm 3 0dBm 3 0dBm LED PON E eo 20 0dBm 24 0dBm 24 0dBm FO Link ACT TX Link ACT Link Budget 10 5dB 19 0dB 19 0dB Power I P AC 100 240V O P DC 5V 1 6A Power Consumption 3W Wave Length WDM eee Weight ne commit TYPE W2A SM 10 W2B SM 10 W2A SM 20 W2B SM 20 imensions mm mm mm Temperature Operating 0 50 C Storage 20 60 C TX Wavelength 1310nm 1550nm 1310nm 1550nm Humidity 5 90 RH RX Wavelen th Emission Electrical UL CSA o TRL a uli EMI FCC Class A CE Typical Distance 10Km 10Km 20Km 20Km_ Please contact us for further reports and updates Min TX PWR 10 0dBm 9 0dBm 7 0dBm 7 0dBm Media Max TX PWR TP EIA TIA 568 CAT 5e 1000M si E 8 Rel Fiber 50 125 62 5 125um multi mode fiber ee ede 9 125 10 125um single mode fiber Link Budget 12 0dB 13 0dB 16 0 dB 16 0 dB NOTE Specifications may change without prior notice User s Guide Contact Information Connection Technology Systems Inc 18F 6 No 79 Sec 1 Hsin Tai Wu Rd Hsichih Taipei Hsien Taiwan R O C Tel 886 2 2698 9661 Fax 886 2 2698 9662 E mail info ctsystem com Version 0 95
3. Trademarks CTS is a registered trademark of Connection Technology Systems Inc Contents subject to revision without prior notice All other trademarks remain the property of their owners Copyright Statement Copyright Connection Technology Systems Inc This publication may not be reproduced as a whole or in part in any way whatsoever unless prior consent has been obtained from Connection Technology Systems Inc FCC Warning The CVT 3002 PLUS Series converters have been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These standards are designed to provide reasonable protection against harmful interference when these devices are operated in a commercial environment These devices generate use and can radiate radio frequency energy and may cause harmful interference to radio communications unless installed in accordance with this User s Guide Operation of these devices in a residential area is likely to cause harmful interference which will make the user responsible for the appropriate remedial action at his her own expense CE Mark Warning These are Class A products In a domestic environment these products may cause radio interference in which case the user will need to consider adequate preventative methods 1 Checklist The package should contain the following items CVT 3002 PLUS Converter AC DC Power Adapter User s Guide Please notify y
4. our sales representative immediately if any items are missing or damaged 2 Overview CVT 3002 PLUS is designed to meet the massive needs for Gigabit network deployment and able to extend a copper based Gigabit network via fiber cable to a maximum distance up to 80KM CVT 3002 PLUS is fully compliant with IEEE802 3 802 3u 802 3ab amp 802 3z standards It can be installed into a CVT Converter RACK The installation amp operation procedures are simple amp straightforward Operation status can be locally monitored through a set of Diagnostic LED located in the front panel Major Features Auto Negotiation in TX port MDI MDIX Auto Crossover supported Support Flow Control Support Link Alarm Support Jumbo Frame 9K bytes under 10 100 1000Mbps Store and Forward Switching Mechanism Support Auto amp Force mode configuration 3 Installation Attach fiber cable from the CVT 3002 PLUS to the fiber network The fiber connections must be matched transmit socket to receive socket Attach a UTP cable from the 10 100 1000BASE T network to the RJ 45 port on the CVT 3002 PLUS Connect the power adapter to the CVT 3002 PLUS and check that the Power LED lights up The TX Link Act and F O Link Act LEDs will light up when all the cable connections are satisfactory Power FDX ele a OSpeed QQ FO TX Link Act Figure 1 CVT 3002 PLUS dual fiber Front Panel POURI NA Statu i So O k S g Link
Download Pdf Manuals
Related Search