Thank you for purchasing the Kyocera FS
Contents
1. CDRH regulations The Center of Devices and Radiological Health CDRH of the U S Food and Drug Administration implemented regulations for laser products on August 2 1976 These regulations apply to laser products manufactured after August 1 1976 Compliance is mandatory for products marketed in the United States A label indicating compliance with the CDRH regulations must be attached to laser products marketed in the United States Ozone concentration The printer generates ozone gas 03 which may concentrate in the place of installation and cause an unpleasant smell To minimize concentration of ozone gas to less than 0 1 ppm we recommend you not to install the printer ina confined area where ventilation is blocked il IMPORTANT SAFEGUARDS ba W N Read all of these instructions and save these instructions for later use Unplug this product from the wall outlet before cleaning Do not use this product near water Do not place this product on an unstable cart stand or table The product may fall causing serious damage to the product Slots and openings in the cabinet and the back are provided for ventilation to ensure reliable operation of the product and to protect it from overheating these openings must not be blocked or covered The openings should never be blocked by placing the product on a bed sofa rug or other similar surface This product should never be placed near or over a radiator or heat register T2. CORPORATION under license KYOCERA as a Licensee of BITSTREAM grants you the Sublicensee non exclusive right to use FONTWARE TrueDoc installed in this Printer if you agree to and at all times comply with the following items 1 Ownership As the Sublicensee you own the Printer in which FONTWARE TrueDoc is originally installed but BITSTREAM retains title to and ownership in the software program of FONTWARE TrueDoc The Sublicense is not a sale of the original software program of FONTWARE TrueDoc or any portion or copy of it 2 Copy Restrictions FONTWARE TrueDoc is copyrighted Unauthorized copying of FONTWARE TrueDoc even if modified merged or Included with other software is expressly forbidden You may be held legally responsible for any copyright in fringement 3 Unauthorized Use FONTWARE TrueDoc may not be removed disclosed and transferred to any third party for any length of time without the prior written consent of KYOCERA or BITSTREAM Also you may not modify adapt translate reverse engineer decompile or create derivative works based on FONTWARE TrueDoc 4 Term This agreement should remain in full force and effect forever thereby allowing the Sublicensee to use the FONTWARE TrueDoc forever unless the Sublicensee violates the terms of paragraphs 2 or 3 above In the event of such violation this agreement will terminate automatically without notice from KYOCERA Upon termination you should destroy FONTWARE TrueD
3. the product C If the product has been exposed to rain or water D If the product does not operate normally when the operating instructions are followed Adjust only those controls that are covered by the operating instructions since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation E If the product has been dropped or the cabinet has been damaged ill CE Marking Directive according to Council Directive 89 336 EEC and 73 23 EEC Manufacturer s name Kyocera Corporation Printer Division M anufacturer s address 2 14 9 Tamagawadai Setagaya Ward Tokyo 158 8610 J apan declares that the product Product name Colour Laser Printer Model number FS 5800C as tested with enhancement optional units PF 80 and HD 2C conforms to the following product specifications EN 55 022 1994 Class B EN 61 000 3 2 1995 Class A EN 61 000 3 3 1995 EN 50 082 1 1992 IEC 801 2 1991 contact level 2 air discharge level 3 IEC 801 3 1984 level 2 IEC 801 4 1988 power lines level 2 signal lines level 2 EN 60 950 1992 A14 A2 A3 EN 60 825 1 1994 The manufacturer and its merchandising companies retain the following technical documentation in anticipation of the inspection that may be conducted by the authorities concerned User s instruction that conforms to the applicable specifications Technical drawings Descr
4. 2064 Australia Phone 61 2 9 906 8075 Fax 61 2 9 906 8153 Disclaimer We shall have no liability or responsibility to customers or any other person or entity with respect to any liability loss or damage caused or alleged to be caused directly or indirectly by equipment sold or furnished by us including but not limited to any interruption of service loss of business or anticipatory profits or consequential damages resulting from the use or operation of the equipment or software ENERGY STAR As an ENERGY STAR Partner Kyocera Corporation has determined that this product meets the ENERGY STAR guidelines for energy efficiency brer The basic objective of the ENERGY STAR Program is to reduce environmental pollution by encouraging the manufacture and sale of equipment that uses energy more efficiently This printer is equipped with a sleep timer function that conforms with the standards of the ENERGY STAR Program This function makes it possible to reduce the amount of electrical power consumed by the printer F or maximum power savings turn off the printer s power supply when not using the printer for extended periods of time Initial settings of the sleep timer function and power saved using the sleep timer function Values in brackets are ENERGY STAR program guide lines Initial sleep mode setting Power consumption during sleep mode 60 minutes 60 minutes 45 W 45 W vi Contents AU ONS EE 1 Chapter 7 Featur
5. ACE INSIDE CAUTION HOT SURFACE INSIDE CAUTION HOT SURFACE BELOW ATTENTION ATTENTION SURFACE CHAUDE CI DESSOUS GHAUDE VORSICHT HEIBE OBERFLACHE DARUNTER Cl INTERIEUR ATENCION SUPERFICIE CALIENTE ABAJO VORSICHT HEISSE FLACHE INTERN ATENCION SUPERFICIE CALIENTE EN EL INTERNO For Your Safety xii FOR USERS IN U K IMPORTANT FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULLY This printer is supplied with a moulded three pin mains plug each for your safety and convenience A 13 amp fuse is fitted in this plug Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 13 amps and that it is approved by ASTA or BSI to BS 1362 Check for the ASTA mark or the BSI mark Y on the body of the fuse If the plug contains a removable fuse cover you must ensure that it is refitted when the fuse is replaced If you lose the fuse cover the plug must not be used until a replacement cover is obtained A replacement fuse cover can be purchased from your local dealer IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13 AMP SOCKET If a new plug is to be fitted please observe the wiring code as shown below If in any doubt please consult a qualified electrician WARNING THIS APPLIANCE MUST BE EARTHED IMPORTAN
6. T ATTENTION Invisible laser radiation Invisible laser radiation Unsichtbare Laserstrahlung Rayonnement laser invisible when open and interlock when open and wenn Abdeckung ge ffnet dangereux en cas defeated interlocks defeated und Sicherheitsverriegelung d ouverture et lorsque AVOID DIRECT AVOID EXPOSURE berbr ckt la s curit est neutralis e EXPOSURE TO BEAM TO BEAM NICHT DEM STRAHL EXPOSITION DANGEREUSE AUSSETZEN AU FAISCEAU PELIGRO VARNING VARO VARNING ADVARSEL ADVARSEL Cuando se abre y se Osynlig laser N kym t nt Osynlig laserstr lning Usynlig laserstr ling Usynlig laserstr ling invalida el bloqueo se str lning n r denna avattaessa ja n r denna del r ved bning n r n r deksel pnes og producen radiaciones del r ppnad och suojalukitus ppnad och sp rren r sikkerhedsafbrydere sikkerhedslas brytes invisibles de l ser sp rrar r ohitettaessa olet urkopplad er ude af funktion UNNGA EVITESE LA urkopplade alttiina lasersateilylle BETRAKTA EJ UNDGA EKSPONERING EXPOSICION STRALEN ALA KATSO STRALEN UDS TTELSE FOR FOR STRALEN A TALES RAYOS AR FARLIG SATEESEEN STRALING 220 240 VAC equipment N i CLASS_ 1 LASER PRODUCT KLASSE 1 LASER PRODUKT CLASSE 1 LASER PRODUIT CLASE 1 LASER PRODUCTO d V d S i i i Y Laser diode properties Laser output 5 MW max Wavelength 780 nm Emission duration Continuous CAUTION HOT SURF
7. T The wires in this mains lead are coloured in accordance with the following code Green and Yellow Earth Blue Neutral Brown Live As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The wire which is coloured GREEN AND YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the Earth symbol S or coloured GREEN or GREEN AND YELLOW The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED How to replace the fuse Open the fuse compartment with a screwdriver and replace the fuse SCREWDRIVER FUSE COVER
8. Thank you for purchasing the Kyocera FS 5800C Colour Laser Printer Notice NO LIABILITY IS ASSUMED FOR ANY DAMAGE CAUSED BY IMPROPER INSTALLATION The information in this manual is subject to change without notification Additional pages may be inserted in future editions The user is asked to excuse any technical inaccuracies or typographical errors in the present edition SOFTWARE USED WITH THIS PRINTER MUST SUPPORT THE PRINTER S NATIVE MODE OR ONE OF ITS EMULATION MODES The printer is factory set to emulate the PCL 5C The emulation mode can be changed by following the procedures described in Using the Printer No responsibility is assumed if accidents occur while the user is following the instructions in this manual No responsibility is assumed for defects in the printer s firmware contents of its read only memory This manual any copyrightable subject matter sold or provided with or in connection with the sale of the printer are protected by copyright All rights are reserved Copying or other reproduction of all or part of this manual any copyrightable subject matter without the prior written consent of the copyright holder is prohibited Any copies made of all or part of this manual any copyrightable subject must contain the same copyright notice as the material from which the copying is done Copyright 1998 by Kyocera Corporation and KYUSHU MATSUSHITA ELETRIC CO LTD All rights reserved Revision 1 0 April 1998 Regardi
9. es ek ENKEN ENNEN EN EN ENNEN ENNEN EN ENNEN EEN ENKEN ENNEN ENEE EN 3 System Requirements ccccceseccesseeeseeseeseeeseeseenseeseesseesenneessonaes H E 4 Before You JE 4 Minimum Space Requirements cccssssccsssseeccesseeseesseneeneeesees 5 Start POW CE EE 5 Unpacking BE 6 Steg Tu Scene emer ct re iat teers oath cont sin AE EAE NE 7 Control Panel Overview cccccsseceeneeecnseesenseeensesenseeeenseneenees 8 Setting Up the Printer cccccssssseescssseeceesseeseesseesensessenseesees 12 Preparing the Imaging IAN EE 12 Chap ter 2 Seting Up the Qutput DEE Age EE 13 Installing the Toner Developers AA 14 Setup Loading Media RE 16 Loading Paper or Transparencies in the Media Cassette 16 Loading Media in the Multi purpose Tra 19 Connecting the Printer to a Computer ccccceeeeeeeeeeeeeneeees 23 Using a Parallel Interface Cable cc cicccccccccssseceeeeeeeeeeeseeeeseeeeseeeeeeeesaaeees 24 Connecting the Serial Interface ccccccccceceeseceeceeeeeeeeeeseeeeeeeeesaeeseeeeseaeeess 25 Installing the Harddisk Option 25 POW OD E 25 Printing a Status Page From the Printer Control Panel 26 Installing the Driver Software ccccssseessesseeeeenseesenneeseonseees 27 Installing the Printer Driver for Windows 371 27 Installing the Printer Driver for Windows 905 28 Setting the Colour Density cccccsssseeceesseecessseese
10. his product should not be placed in a built in installation unless proper ventilation is provided This product is equipped with a 3 wire grounding type plug a plug having a third grounding pin This plug will only fit into a grounding type power outlet This is a safety feature If you are unable to insert the plug into the outlet contact your electrician to replace your obsolete outlet Do not defeat the purpose of the grounding type plug 7 Do not allow anything to rest on the power cord Do not locate this product where persons will walk on the cord If an extension cord is used with this product make sure that the total of the ampere ratings on the products plugged into the extension cord do not exceed the extension cord ampere rating Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock Never spill liquid of any kind on the product 10 E xcept as explained elsewhere in User s Manual do not attempt to service this product yourself Removing covers may expose you to dangerous voltage points or other risks Refer all servicing in those compartments to service personnel Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions A When the power cord or plug is damaged or frayed B If liquid has been spilled into
11. iptions of the procedures that guarantee the conformity Other technical information KYOCERA ELECTRONICS EUROPE GmbH Mollsfeld 12 40670 Meerbusch Germany Phone 49 21 59 918 O Fax 49 21 59 918 100 ISO 7779 Maschinenlarminformationsverordnung 3 GSGV 18 01 1991 Der h chste Schalldruckpegel betr gt 70 dB A oder weniger gemals ISO 7779 1V Declaration of Conformity Australia M anufacturer s name Kyocera Corporation Printer Division M anufacturer s address 2 14 9 Tamagawadai Setagaya Ward Tokyo 158 8610 J apan declares that the product Product name Colour Page Printer Model number FS 5800C tested with PF 80 and the HD 2C Conforms to the following product specifications AS NZS 3548 1995 EN 55 022 1994 Class B EC60950 EN 60 950 19924 A1 A2 A3 EC60825 EN 60 825 1994 Description of device The model FS 5800C utilizes plain paper laser dry toner etc The printer can be equipped with several enhancement optional unit s such as the harddisk unit HD 2C The manufacturer and its merchandising companies retain the following technical documentation in anticipation of the inspection that may be conducted by the authorities concerned User s instruction that conforms to the applicable specifications Technical drawings Descriptions of the procedures that guarantee the conformity Other technical information KYOCERA ELECTRONICS AUSTRALIA PTY LTD Unit 8 43 45 Herbert Street Artarmon NSW
12. ng Tradenames KPDL is a trademark of Kyocera Corporation HP Color Laser et 5 is a product of Hewlett Packard Company Hewlett Packard PCL and PJ L are registered trademarks of Hewlett Packard Company Centronics is a trade name of Centronics Data Computer Corp Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and or other countries Pentium is a registered trademark of Intel Corporation PostScript is a registered trademark of Adobe Systems Incorporated Macintosh is a registered trademark of Apple computer Inc Adobe and Acrobat are trademarks of Adobe Systems Incorporated which may be registered in certain jurisdictions Typeface Trademark Acknowledgement All resident fonts in this printer are licensed from Bitstream Inc Cambridge Massachusetts U S A Dutch801 Swiss742 Incised901 ZapfCalligraphic801 ZapfH umanist601 OriginalGaramond and Chianti are trademarks of Bitstream I nc Century Schoolbook Stymie and Cooper Black are trademarks of Kingsley ATF Type Corporation ITC AvantGarde ITC Benguiat ITC Bookman ITC Souvenir ITC ZapfChancery and ITC ZapfDingbats are registered trademarks of International Type face Corporation Revue is a trademark of Esselte Pendaflex Corporation in the U S Letraset Canada Ltd in Canada and Esselte Letraset Ltd elsewhere Bitstream Sublicense Agreement FONTWARE TrueDoc developed by BITSTREAM INC is provided as part of this Printer by KYOCERA
13. nseeseenseesees 31 Mode Selecon enedouoveceeuesueatuuueverees 35 NAVIGATING TAFOUGH THE MGAUS EE 37 Chapter 3 KH Ee 38 Other menus Others EE 48 i IVE MGI SET 51 Using the Setting the Sleep TimMer ec ceserescrcesevecwacescedavertessabevedersssshsteceedssabveteesscdstendereects 56 Printer Resource PIOlCCHOM eege 56 Displaying the Printer Driver Window c ssccsssesseeeeeeeeeeeees 58 Den E E e E V AE AE E E E E EA 60 Bier e EE EE AE E E E E E T EEE E 61 6 6 eS EE 62 Opon Ia a E eee ene een EE eee 66 SCUD T D ae E A ER eae 67 vii Contents Chapter 4 Care and Maintenance Appendix viii NS INIA EE 69 User Replaceable Components cccssseccceeseeecenseeseenseesenseees 73 Clearing a Jam E 75 Troubleshooting sssnnnunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn mnnn 87 Error Ee LE 95 Printer Panel Message E 95 PROD Elei dl Le EE 101 TIPS CIT IC AUN OND CR 110 Bal EE 110 Medid EE 111 MALOINS and PUMATA EE 112 Eege 115 Bidirectional Parallel Interface cccccssscccssseceeeeceeeeeseeeessseesseeeesseeesees 116 Warning To prevent fire or shock hazard do not expose this product to rain or any type of moisture Caution Do not open covers and do not attempt to repair the unit yourself Refer servicing to qualified personnel Power Source Warning The power source voltage of this unit is listed on the nameplate Only plug the unit into an outlet with the proper vol
14. oc and all copies of them in part and in whole including modified copies if any Important note on the interface connectors Be sure to turn off printer power before connecting or disconnecting an interface cable to the printer For protection against static discharge which may be applied to the printer s internal electronics through the interface connector s keep any interface connector which is not in use capped using the protective cap supplied A shielded interface cable must be used Safety information Laser safety This printer is certified as a Class 1 laser product under the U S Department of Health and Human Services DHHS Radiation Performance Standard according to Radiation Control for Health and Safety Act of 1968 This means that the printer does not produce hazardous laser radiation Since radiation emitted inside the printer is completely confined within protective housings and external covers the laser beam cannot escape from the printer during any phase of user operation Laser notice This printer is certified in the U S to conform to the requirements of DHHS 21 CFR Subchapter for Class 1 laser products and elsewhere is certified as a Class laser product conforming to the requirements of IEC 825 CAUTION Invisible laser radiation when open AVOID DIRECT EXPOSURE TO BEAM Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure
15. tage When you operate this equipment the outlet should be near the equipment and accessible To ensure safe operation the AC cord supplied must be inserted into standard three prong AC outlet which is effectively grounded earthed through the normal wiring The fact that the equipment operates satisfactorily does not imply that the power point is grounded earthed and that the installation is completely safe For your safety if in any doubt about the effective grounding earthing of the power point consult a qualified electrician If the plug cannot be inserted into the AC outlet contact a licensed electrician to replace the outlet with a properly grounded earthed one Do not defeat the purpose of the grounding earthing plug e g using a conversion plug Laser Safety Caution This printer utilizes a laser Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure Ozone Release Warning Make sure that the printer is installed in a well ventilated room so as not to increase density of ozone in the air Since ozone is heavier than air it is recommended that air at floor level be ventilated 1X For Your Safety Moving the Unit The printer weighs approximately 48 kg 105 8 Ibs It must be handled by two people Turn the power off and remove the power cord when handling the unit For Your Safety Caution Labels DANGER CAUTION VORSICH
Download Pdf Manuals
Related Search