Home

AFS Pro 700 User Manual v28

1. RCIL11DSP391BBG 16 If the updated value is out of range a warning message Ze Distance Calibration displays Redo calibration See operator s manual if problem continues Press the OK button to acknowledge and clear the message Perform the procedure again with greater accuracy to correct the problem 6 Repeat the calibration procedure to verify accuracy In general there should not be a great difference be tween individual runs Multiple runs can be averaged for greater accuracy sum the calibration values from each run and divide the total by the number of runs performed 7 Manually enter the average value in the Distance Cal Value window Press the Distance Cal Value window to access the numeric keypad Use the keypad to enter the average calibration value Press the Enter button on the keypad to save the av erage calibration value RCIL11DSP393BBG 18 NOTE The calibration values shown are for reference only Use the value that results from your vehicle con figuration operating in your field conditions 3 157 3 SETUP Area calibration Use area calibration whenever there is a mismatch be tween the known area for a field and the recorded area for the same field The calibration adjusts the recorded area in hectares or acres including all work data in the in dividual tasks to reflect the known area The calibration value is only stored for tasks in
2. RCIL11DSP259BBG 12 A performance map for the selected field represents fuel economy with different colors Each color indicates a range of fuel usage per area L ha gal ac NOTE The units shown are based on the units of mea surement selected by the current operator in the Opera tor Setup screen Home gt Toolbox gt Oper RCIL11DSP260BBG 13 Map toggle Use map toggle to rapidly switch between the available map data types for your vehicle without using the Map Layer window Press anywhere on the work map to instantly toggle to the next available map type for example from coverage to moisture or from coverage to granular Press anywhere on the work map again to toggle to the next available map type for example from moisture to yield or from granular to liquid The maps display in alphabetical sequence restarting with the coverage map in each cycle RCIL11DSP259BBG 14 This feature is automatically available whenever more than one map data type is present 3 26 Vehicle location and heading Yield bu ac If the vehicle is within the selected field an arrow indicates the vehicle s location and direction of travel If the vehicle is outside the selected field no arrow is present if the zoom level is set to Field How the vehicle is shown in relationship to the field de pends on the zoom settings Farm Plank Road Zoom Press the Layer button to
3. NOTE See 3 62 for information about field obstacles Press the Layer button to access the Map Layer win dow Press the Obstacles window to display the pop up op tions window Fal 22 A RCIL11DSP251BBG 43 Press On to display obstacles with the other active map Y TT Z layers Map Layer Press Off to hide the obstacles Data Type Yield O l Zoom Auto y Press the OK button to save the selection and close the Map Layer window RCIL11DSP252BBG 44 3 36 3 SETUP Map legends Press the Legend button to display or edit the color legend for a map The Legend Legend pop up window displays the ranges for the shades used on the map Yield legend 1 p wees NX WM Any data at or above 134 00 TO qa NX NM Any data between 119 00 and 133 99 a m my Any data between 104 00 and 118 99 EEE E Any data between 89 00 and 103 99 EEN E E Any data between 74 00 and 88 99 r E E Any data between 15 00 and 73 99 A Any data below 15 00 appears as blank O RCIL11DSP253BBG 45 Fuel economy legend Any data at or above 468 00 Any data between 390 00 and 467 99 Any data between 312 00 and 389 99 ECE Any data between 234 00 and 311 99 rzi 312 00 L ha Any data between 156 00 and 233 99 es 234 00 Lha p Any data bet 78 00 and 155 99 MET TM Any data between 78 00 and 155 99 CE Any data below 78 00 appears as blank RCIL11D
4. Press Ag3000 DCM 300 RAIL12DSP1307BA 4 When Ag3000 DCM 300 is selected a warning displays Modem transmits with significant power that may harm Conn personnel close to the antenna Locate the antenna at 1 _ Warn lie least 20 cm 8 in away from the operator a g Press the OK button to continue Modem transmits with significant power that may harm personnel close to the antenna Locate the Layout i Vehicle RAIL12DSP1323BA 5 The RTK Source Setup window is added to the screen er GPS Setup Sean A GPS Location Cal Type Press the Edit button in the RTK Source Setup window EA Custom Logging Interval DGPS Alarm egret yen DGPS Type sad Offset RTK RTX Source Right Offset Ag3000 DCM 304 0 000 m RTK Source Setup Height Offset Layout Vehicle RAIL12DSP1324BA 6 3 104 3 SETUP Enter the setup information provided by the RTK network San provider PT TTT Press the OK button to save the entered information to Ags 000 1 DCM 300 Setup the display s memory Y AB Farms uy ll ABFarms 123 456 78 90 sens RAIL12DSP1325BA 7 Press the down arrow on the scroll bar to view the second __ GPS Setup page of the GPS Setup screen jano Settings GPS E E Edit Reset Press the Edit button in the GPRS Settings window rial Number nannnnnnann NOTE If the modem has been properly conf
5. telematics package Use the Password window to enter the server password that is used for remote file transfer Press the Password window to access the pop up al phanumeric keypad Use the keypad to enter the password Press the Enter button on the keypad to save the pass word Omid en Telematics III RAIL12DSP1440BA 13 Telematics Inst alled i Fuel Tank Size 480 gals Username Password ANANNANNNNN Local Password Tel Activate RAIL12DSP1485BA 14 Telematics RAIL12DSP1441BA 19 8 5 8 TELEMATICS APPLICATION Local Password Use the Local Password window to connect to the DCM 300 modem on your vehicle A red X displays in the window until a valid password is entered Press the Local Password window to access the pop up alphanumeric keypad Use the keypad to enter the password for your DCM 300 modem Press the Enter button on the keypad to save the pass word If the password is correct the red X is replaced with a green check mark a TEL The bars on the Telematics icon turn green to indicate that the cellular network is connected ___ Telematics Telematics CAN Node Fuel Tank Size 480 gal RAIL12DSP1442BA 17 mm ___ Telematics Telematics CAN Node _ anno Fuel Tank Size 480 gar Username Password Pa Local Password RAIL12DSP1487BA 18 8 6 8 TELEM
6. 3 95 3 SETUP The DGPS Type window should automatically detect the ani A l GPS Setup RTK setting for the receiver PS Location panas Micana N NOTE The GPS receiver must be RTK enabled before aana TEPERT DOPE ALAR this selection will appear on the GPS Setup screen See 1Second N your Case IH dealer to discuss this option if it was not the q DGPS Type Forward Offset original correction method selected for your system looo m RTKIRTX Source Right Offset Mijo ooo m Height Offset 0 000 m Vehicle RAIL12DSP1305BA 4 lf the receiver is enabled for more than one type of correc tion press the DGPS Type window to display the pop up options window Select RTK as your DGPS type RAIL12DSP1306BA 5 The screen updates with only windows appropriate to GPS Setup RTK The RTK RTX Source window is added if a sup A GPS Location Connection Type ported receiver is present Custom Y CAN A Ny Logging Interval DGPS Alarm No y DGPS Type Forward Offset RTK Nilo o00 m RTK RTX Source Right Offset 0 000 m Height Offset 0 000 m o oe Jovem oe RAIL12DSP1305BA 3 96 3 SETUP Press the RTK RTX Source window to access the pop up options window Select AgGPS Radio 0 000 m Layout MEN GPS RAIL12DSP1307BA 7 The Channel ID window appears PTE Ca GPS Setup Press the Channel ID
7. AFS 252 262 or 372 or an equivalent Trimble receiver e Serial number for the GPS receiver located on the decal on the GPS receiver near the connector Satellite beam name or type of service e OmniSTAR HP e OmniSTAR XP e OmniSTAR VBS e OmniSTAR RTX OmniSTAR will activate the receiver Activation normally takes 5 30 min 3 122 TOT eRe GPS Location F GPS Setup Connection Type Custom N CAN A Y Logging Interval DGPS Alarm 1Second MN VF DGPS Type Forward Offset IHP XP_ 0 000 m _ DGPS Backup Right Offset ves Moom Position Recall RCIL11DSP407BBG 34 RCIL11DSP355BBG 35 3 SETUP OmniSTAR VBS When activating or renewing a VBS subscription the ve hicle and the display must remain ON for about one hour to complete the process The hour starts from the time the GPS receiver is acti vated When complete the GPS status window reports DGPS OK and the vehicle can be turned OFF This requirement is true whether VBS is your only sub scription or whether it accompanies an HP or XP subscrip tion 3 123 3 SETUP Autonomous raw GPS setup The Autonomous selection is available for remote re en a GPS Setup gions of the globe where no corrected differential GPS is 0 GPS Location Connection Type available When Autonomous is selected in the DGPS g Custom Y CAN A Y Type window the system uses raw uncorrected GPS for Logging Interval
8. Delete DEL button to clear the previous char acter or number Press the Shift e button to toggle between uppercase a and lowercase letters DEL ALL DEL 7 123 Enter Press the 123 123 button to toggle between the numeric and special characters and the alphabet windows Press the Enter _Enter button on the keypad to save the name or value The keypad closes and the win dow displays the newly created name or value TE RCIL11DSP091BBG 5 Press the Close X button to exit without making a change 2 9 2 ICONS AND WINDOWS Input errors Text entry windows are limited in length to a maximum of 18 characters The keypad does not accept any additional characters when this limit is reached If an operator attempts to enter a name that already exists for the selected field an input error message appears The message occurs when the operator presses the En ter button on the keypad to save the name The message prompts the operator to use another name Press the OK button to acknowledge and clear the mes sage The operator has the option of editing an existing name or entering a variation on the existing name If an operator attempts to enter a number that exceeds the range allowed for the selected window an input error message appears The message occurs when the operator presses the En ter button on the keypad to save the value The message shows the valid rang
9. Fuel Level Los lb 12 34 PM Jun 15 2012 RCIL11DSP383BBG 1 2 22 2 ICONS AND WINDOWS TOOLBOX SCREENS Introduction This chapter introduces basic Toolbox screens that are common to all applications on the AFS Pro 600 and AFS Pro 700 displays The information entered on these screens is a shared resource for all farming applications on the display The techniques used to set up the display operators Run screen layouts and vehicle name can be used in any other application Display Setup screen Use the Display Setup screen e To set the current date and time on the display e To select time format e To select display language e To select the operator s interface level e To set the display backlight level for all applications e To select the current vehicle type On the Home screen press the Toolbox icon to access the Toolbox screens The Display Setup screen displays by default If a different Toolbox screen displays press the Disp display icon on the navigation bar to access the Display Setup screen De EE eE Toolbox Remote Valves Work Condition k e Data Management Calibration Electronic EOR RCIL11DSP108BBG 1 an RCIL11DSP109BBG 2 2 23 2 ICONS AND WINDOWS Month Day and Year Press the Month window to access the numeric keypad The display must be set to th
10. Map contents If the vehicle is working the swath map displays the swath width for the vehicle with its implement or header as a green area outlined in black as the vehicle moves If the vehicle is not working no swath information is mapped as the vehicle moves NOTE The color used for coverage has no significance it does not represent a level of yield application or per formance results lf a recorded swath is selected for the field a red line represents the current swath and blue lines represent the swaths on either side The recorded swath also displays if it is in the current view of the field The autoguidance swath pattern is always overlaid on the working swaths when the Autoguidance application is present The swath map also displays any field marks boundaries and obstacles that are present in the current view of the field The display of marks boundaries and obstacles cannot be toggled off by any operator control on the swath map 3 43 Farm Plank Road Farm Plank Road RAIL12DSP1003BA 13 Swath alignment The swath map can reveal problems with swath alignment as in this example where the vehicle offset values were not entered correctly A pattern of overlap in one pass followed by skip in the next pass indicates that the implement or header was not set up properly This may occur if e The implement or header is offset on the vehicle but no offset value was entered e
11. e When planting an operator using planter Z may plant corn of a certain seed brand and coating tag in the field FD321 on the Plank Road farm for the grower AB Fo321 Farms e When spraying an operator using sprayer Y may a 12 1 1 06 11 13 17 spray herbicide of a certain brand tag in the field FD321 on the Plank Road farm for the grower AB Farms e When harvesting an operator using combine X may harvest soybeans of a certain seed brand tag in the RCIL11DSP206BBG 21 field FD321 on the Plank Road farm for the grower AB Farms A new task is automatically created when a field is cre ated The software creates the task name with the date and time stamp for the task yy mm dd hh mm ss yy year mm month dd day hh hour mm minute ss second NOTE The format for the auto generated task name can not be changed and is not influenced by the selection in the Date Format window on the Operator Setup screen Home gt Toolbox gt Oper An operator may edit the task name if desired A new task can be created at any time Each task is limited to approximately 8 h of operation sys tem collecting GPS data After that time period a mes sage displays to alert the operator that a new task has been created automatically As a result the work performed in the field depending on its duration may be composed of multiple tasks A maximum of 1200 tasks can be created 3 S
12. map for a product When Outline is selected the boundaries for the pre scription zones appear as black lines that are superim posed on the as applied map for the product RCIL11DSP247BBG 38 3 34 3 SETUP When Color is selected the as applied map for the TL TIA product is superimposed on a color map of the prescrip tion zones Lal RCIL11DSP248BBG 39 Press the Layer button to access the Map Layer win dow Press the Rx Style window to display the pop up options window RCIL11DSP249BBG 40 Press Outline to display the boundary lines for the pre scription zones Press Color to display the prescription zones in color Press the OK button to save the selection and close the Map Layer window RCIL11DSP250BBG 41 3 35 Obstacles User defined field obstacles appear on the work map when enabled along with the other active map layers NOTE Even if an operator chooses not to display obsta cles the display still warns the operator if the path of the vehicle with its implement or header will contact the ob Stacle All obstacles types closed open or point normally dis play in amber An obstacle on the map turns red when the vehicle with its implement or header enters the warning Farm zone as defined in the Look Ahead Time window on the Precision Farming Setup screen Home gt Toolbox gt PF
13. screen based on operator preference or need RCIL11DSP180BBG 2 3 SETUP The selections in the windows on the Profile Setup screen describe the active data set for which production results are logged The windows are grouped on the Profile Setup screen for easy access Any of the win dows can be added to any Run screen for the operator s convenience The data set has an hierarchical structure e For each grower there can be many farms For each farm there can be many fields e For each field there can be many tasks Crop Type e Task is the lowest level in which data is stored and each task can only have one crop type and one tag RCIL11DSP181BBG 3 NOTE To enable mapping and data logging to the mem ory stick for analysis with the desktop software set the Interface Level window on the Display Setup screen to Advanced Home gt Toolbox gt Disp On the Home screen press the Performance icon to access the Performance screens p oc Toolbox Diagnostics Remote Valves sta rroma WO Work Condition Data ANACO Electronic EOR RCIL11DSP108BBG 4 Press the Profile icon in the navigation bar to access the En Profile Setup screen COLO Grower RCIL11DSP179BBG 5 Grower The Precision Farming application organizes data collected on the display for your farming operations by growers farms fields tasks and
14. 1 Navigate to the desired screen 2 Press and hold the screen s icon in the navigation bar for approximately 2 s RCIL11DSP525BBG 1 3 If the windows on the screen have printable content a confirming message displays Printing requested Are you sure Press the Yes button to proceed with printing and clear the message Press the No button to cancel the request and clear Gil Printing requested the message Mare you sure In this example a file named Operator Setup followed by the date and time stamp is saved to the memory stick RCIL11DSP455BBG 2 If the screen contains no printable content a different message displays No printable data in the current screen Press the OK button to clear the message No file is saved to the memory stick The screen con tents may be recorded manually No printable data in the current screen RCIL11DSP456BBG 3 6 PRINTER APPLICATION Connect to a printer The display is capable of printing screen contents to a portable thermal dot matrix printer that uses paper rolls Printers that are designed to be powered by the vehicle battery or by a portable battery pack simplify installation and are ideal NOTE The A630 A631 and A632 series printers from Axiohm are shown in these examples Visit www ax iohm biz for more information RCPH11DSP024BBG 1 Large combines use a unique implementation for sup porting a
15. 3 93 3 SETUP Base station location Some planning is needed to pick the optimum location or locations for the base station s during field work Your Case IH dealer is available to assist you with a site survey The GPS antenna is The component that requires the most attention when picking locations ll For maximum repeatability and accuracy e Install the GPS antenna at a height and field location that will not change from one season to the next e Ensure that the GPS antenna is level The RIK broadcast antenna mounted with the same bracket as the GPS antenna is second in importance since it must remain in communication with the vehicle throughout the field The location of the GPS receiver case and battery power supply are a matter of conve nience Consider these factors when choosing field positions for the base station The position must be away from vehicle traffic patterns to prevent accidental contact e The position must be repeatable easily located from season to season year to year RCPH11DSP017BAG 2 e Imagine the position through the entire growing season when there may be tall standing crop between the loca tion and vehicle e The support for the GPS antenna must be sturdy and solid to prevent movement and tipping from normal wind or rain during field work e The position must offer a clear view of the sky away from or above buildings or other large objects that can r
16. DGPS Alarm data collection and vehicle control Second MN M o DGPS Type Forward Offset While the pass to pass functionality for some farming op MiAutonomous N 0 000 m eration may be acceptable any operation requiring ex i f ea ight Offset act data collection and positioning will suffer Obstacle 0 000 m and boundary creation are not recommended when Au at E es tee Height Offset tonomous is selected If there is any significant lapse of 3 302 m7 time between their creation and further use the obstacles and boundary will shift significantly RCIL11DSP357BBG 1 lf the receiver is enabled for more than one type of correc GPS Setup tion press the DGPS Type window to display the pop up Connection Type options window Press Autonomous to operate with raw GPS input RCIL11DSP358BBG 2 3 124 3 SETUP PRECISION FARMING APPLICATION GPS AND RESOURCE STATUS Introduction This chapter continues information on the Precision Farming application and explains e The GPS Status screen e The Constellation Map screen e The GPS Receiver screen e The Resource Status screen On the Home screen press the Diagnostics icon to access the Diagnostics screens GPS Status screen The type of correction enabled on the GPS receiver deter mines the content of the GPS Status screen For exam ple the convergence Reset button is onl
17. FD765 Boundary Boundary AP ooo Seo RAIL12DSP0992BA 23 4 OPERATION A pop up options window displays Depending on the inner boundary s current setting press Set Impassible or Clear Impassible Boundary o Edit Subtype i setimpasaibie Delete RAIL12DSP0993BA 24 Delete re RAIL12DSPO994BA 25 4 34 4 OPERATION MEMORY STICK MANAGEMENT Introduction The memory stick contains All of the data types discussed in this chapter for your operation grower farm field task crop type tag work condition operator implement sequence obstacle boundary layout swath and GPS data e All of the vehicle specific information calibration and vehicle setup All of the farming application specific data yield cov erage as applied prescription etc This information is organized in a folder on the mem ory stick with a cn1 extension The folder name will be similar to 130831H7 cn1 where the first six numerals are the date stamp for the folder in this format yymmdd This folder name is automatically updated date and time stamped each time the display is powered ON This cre ates a chronological record for all recorded data and pre vents files from sharing the same name To maintain the integrity of the saved information e Never put two cn1 folders on the same memory stick e Never change the name or extension for any folder e Never change the location
18. NOTE This is the recommended method for sharing these data types since the IDs for the data remains iden tical across vehicles This greatly simplifies processing data with the desktop software Vehicle specific information Some information is never shared between vehicles Vehicle specific calibrations are never shared For example e Steering calibrations reflect the condition of the steering pump and a steering sensor e Distance or slip calibrations reflect the condition of a vehicle s tires Any calibration that reflects the performance properties specific to one vehicle cannot be shared 4 OPERATION Import screen The data types that are discussed in the following pages are not automatically shared between vehicles In most cases the data that is imported is added to the existing data on the display There are two exceptions for combines only imported crop setup information and imported crop calibration in formation replace the existing data in the display On the Home screen press the Data Management icon to access the Data Management screens p NOTE The memory stick from which the data is to be im Toolbox Diagnostics Remote Valves ported must be inserted into the display before the display is powered ON Work Condition Press the Import icon in the navigation bar to display the Import screen import NOTE The Import button remains unselecta
19. Run e ry Performance Data Management Calibration Electronic EOR RCIL11DSP108BBG 1 Hh Eoad ia x Radar Cal Distance Drive Course Start Radar Measured Radar Cal Cal Radar Cal Value RCIL11DSP378BBG 2 Radar Cal Drive Course Start Radar Cal Radar Cal Value RCIL11DSP378BBG 3 3 SETUP 2 Enter the actual length of the course as it was mea NA sured by tape measure H Press the Distance window to access the numeric key pad Use the keypad to enter the value in meters feet Press the Enter button on the keypad to save the value 3 Drive to the start of the course and press the Start button The vehicle can be moving or stationary when the Start button is pressed NOTE Careful alignment with the start position is crit ical for the most accurate results O A Stop button appears and the Radar icon flashes in the status and warning icon area The icon indicates that radar calibration is in progress 4 Drive to the end of the course at the intended work ing speed and press the Stop button The vehicle can be moving or stationary when the Stop button is pressed NOTE Careful alignment with the stop position is crit ical for the most accurate results When the Stop button is pressed the Radar Mea sured window displays the length of the course as it was measured by radar The flashing icon dis
20. e To customize the layout for each Run screen e To select control windows or reporting windows for the six Run screens e To customize the layout and select windows for the left hand area e To customize the layout and select windows for the Summary Data screens if applicable Toolbox De EE Remote Valves A On the Home screen press the Toolbox icon to access the Toolbox screens Performance Work Condition Data Management Calibration Electronic EOR RCIL11DSP108BBG 1 The Display Setup screen displays by default El p Tim Press the Layout icon on the navigation bar to access the Run Layout screen Interface Level Advanced Y RCIL11DSP109BBG 2 2 37 2 ICONS AND WINDOWS Current Layout Default is the default selection in the Current Layout EA Default 3 window 1 The default layout for all six Run screens 1 Aun Screen A aio the left hand area if applicable and the Summary Data 4 7a un 1 Yia2xs N screens if applicable cannot be changed The windows are dimmed to indicate their locked condition The display 2 uses the default layout for all screens whenever Default is selected in the Current Layout window NOTE Each farming application provides default layouts The operator can restore the default layout by selecting Default in the Current Layout window Run 1 is the default se
21. eee Local Password x RAIL12DSP1481BA 5 Telematics RAIL12DSP1482BA 6 8 TELEMATICS APPLICATION Telematics Installed Telematics CAN Node Telematics CAN Node Ora Em a Telematics Use the Telematics CAN Node window to set the display CAN channel that the DCM 300 modem is connected to The default setting for this window is CAN A This setting i Fuel Tank Size Fuel Theft Delta should remain unchanged 7 Fuel Tank Size tractors only Use the Fuel Tank Size window to set the size of the fuel tank when the current vehicle is a tractor Press the Fuel Tank Size window to access the pop up keypad Telematics Installed Use the keypad to enter a value OM all En mm ATI elematics ode Press the Enter button on the keypad to save the value w Yea Vicana a 1 RAIL12DSP1483BA 9 8 TELEMATICS APPLICATION Fuel Theft Delta S E Telematics Telematics Installed palettes CAN Node NOTE The Fuel Theft Delta window is only required for growers who intend to use the Short Message Service SMS fuel theft alarm feature of the AFS Connect Exec utive telematics package Use the Fuel Theft Delta window to set the threshold for when a fuel theft alarm is triggered When the system is powered ON the Telematics appli cation compares the current fuel level to the fuel level that was recorded before the syste
22. screen Home gt Diagnostics gt GPS RCIL11DSP345BBG 16 3 114 When the initialization process is complete another infor mation message displays You may now move the vehi cle G HP XP Position iP Recall Completed This message does NOT mean that the signal is con verged but rather that the vehicle can be moved while signal convergence continues lg may now move the vehicle Press the OK button to acknowledge and clear the mes sage RCIL11DSP349BBG 17 DGPS Reset button If position recall fails the system automatically restarts the HP XP Position convergence process ae Recall Failed An information message displays HP XP is converg ing You may move the vehicle move the vehicle Jiu converging You may Press the OK button to dismiss the message Use the Reset button in the HP XP Convergence window on the GPS Status screen to manually reset the position calculation if e An operator discovers that the vehicle was moved but NO was selected at the message prompt RCIL11DSP351BBG 18 OR e The DGPS Converging bar graph window does not indicate any progress for 10 20 min NOTE If the bar graph in the DGPS Converging window is progressing toward 100 do not reset the process If the bar graph is stopped at a low percentage reset the process NOTE This window is available on the GPS Status screen for both H
23. DGPS n type RTK type HP XP GPS fix is still available Any receiver any GPS type A faulty or incompatible GPS receiver is in use No RTK Base Known receiver The age of correction from type RTK the base station is greater than 5 seconds No communication with base station is possible The system is not ready for use A GPS fix is available Service Exp Known receiver Your subscription for the type VBS or HP XP current correction type has expired No correction is available n the number of satellites that are in view The icon flashes if Yes is selected in the DGPS Alarm window on the GPS Setup screen Based on the condition above Note A known receiver is an AFS 162 AFS 252 AFS 262 or AFS 372 receiver or a Trimble AgGPS 252 AgGPS 262 or AG 372 receiver All other brands are considered unknown 3 130 3 SETUP DGPS Converging Placement label DGPS Converging The DGPS Converging window offers a visual represen tation of progress for HP XP and standard RTX technolo gies While the system is making complex calculations to reduce the GPS position error the bar graph moves with the progress The Convergence Status window on the GPS Setup screen determines whether the DGPS Con verging window reports a percentage or a value in meters inches The DGPS Converging window is only present when HP XP or standard RTK is us
24. Each Toolbox screen displays the Toolbox icon 2 and a screen label 3 Press any icon in the navigation bar to access the screen for that icon Press the Back icon on the navigation bar to return to the previous screen or the Home screen Profile Sumi RCIL11DSP006ABG 6 Import Filter RCIL11DSP002ABG 7 _ _Display Setup Interface Level Engish Advanced P Current Vehicle Oper Layout RCIL11DSP100BBG 8 2 ICONS AND WINDOWS The number of Toolbox screens depends on the vehicle applications and the mix of other applications that are in stalled on your display Your Toolbox screens may have fewer or more naviga tion icons than those shown The navigation bar adds an arrow to indicate when there are additional icons beyond those that are visible Press the forward arrow to view the next page of naviga tion icons Press the back arrow to view the previous page of navi gation icons Some navigation icons open sub menus These icons are shaped like down arrows Press the down arrow icon to access the sub menu screens NOTE The example shown is for the optional VT ap plication virtual terminal and its Toolbox screens The VT application is used with ISO 11783 compliant imple ments _ Month RCIL11DSP102BBG 10 EN ET Name RCIL11DSP103BBG 11 2 ICONS AND WINDOWS
25. N satellites are in view GPS position is available DGPS position not available DGPS n Any receiver N satellites are in view The system is ready for use DGPS Init n Any receiver with type set A backup DGPS type is LAIEN to HP XP or RTK being used while the signal De is acquired Fault n Any receiver These GPS receivers ul should not produce this GPS quality JIGPS A fault condition is present Known receiver These GPS types should WAAS Beacon VBS not produce this GPS quality A fault condition is present DGPS n q Unknown receiver With an undeterminable AL GPS receiver and type assuming RTK or HP XP is in use a GPS quality of 4 produces DGPS n RTK n o Known receiver The system is ready for use ul type RTK n the number of satellites that are in view The icon flashes if Yes is selected in the DGPS Alarm window on the GPS Setup screen Based on the condition above Note A known receiver is an AFS 162 AFS 252 AFS 262 or AFS 372 receiver or a Trimble AgGPS 252 AgGPS 262 or AG 372 receiver All other brands are considered unknown 3 129 3 SETUP Message Status GPS Type Icon Indicator HP XP n uy Known receiver HP XP is converged The Uf type HP XP system is ready for use No DGPS n i Unknown receiver If the GPS receiver LEED type HP XP or RTK and the GPS type are Da undeterminable GPS GPS quality of 5 produces No
26. Sky Condition e To select the current sky condition Unknown W e To enter the current wind speed Wind Speed Wind Direction Unknown Y e To select the current wind direction Temperature e To enter the current temperature mn CoO e To enter the current humidity percentage The Time Observed window only becomes active after a selection or entry has been made in another window on this screen There is no observation to time stamp until one of the windows contains a selection or entry RCIL11DSP428BBG 2 The Sky Condition and Wind Direction windows on this screen contain predefined lists The lists offer standard classifications to be used for all tasks and cannot be mod ified by the operator Press the Sky Condition window to access the pop up options window Press the selection that most closely matches the current sky condition RCIL11DSP430BBG 3 3 166 3 SETUP Once any window on the Weather Notes screen is popu lated the Time Observed window becomes active The current time and date automatically appear The time and date values displayed are from the windows on the Display Setup screen for this moment of obser vation The time stamp uses the format selected in the Time Format window on the Operator Setup screen Home gt Toolbox gt Oper The date stamp uses the format se lected in the Date Format window on the same screen Thereafter at
27. button RCIL11DSP064BBG 17 When viewed on a work map the closed obstacle appears as an amber elastic polygon that the vehicle stretches around the obstacle The vehicle can be working while obstacle recording takes place Coverage and work re sults may be recorded at the same time The exact path that the vehicle travels is recorded as the edge of the obstacle Unlike a field boundary a closed obstacle must be com 4 En Ru pleted by the operator pn Recording Rec Boundary e Si EAO To close the obstacle press the Stop button when the vehicle returns to the starting point A straight line segment completes the closed obstacle RCIL11DSP064BBG 19 3 68 3 SETUP When viewed on a work map the open obstacle appears as an amber line that follows the path of the vehicle The exact path that the vehicle travels is recorded as the ob stacle An open obstacle must also be completed by the operator To close the obstacle press the Stop button at the logical stopping point for the obstacle When viewed on a work map the point obstacle appears as an amber warning symbol at the marked location The vehicle can be working while obstacle recording takes place Coverage and work results may be recorded at the same time The exact location of the vehicle at the GPS receiver is recorded as the obstacle location Since the point obsta cle type is intended for smaller obstacles the GPS re cei
28. etc e Powering the display OFF and then ON The operator only visits the E notes screens when any of the note windows must be changed This chapter explains e How to select soil type soil moisture soil condition and crop residue for the current field on the Field Notes screen e How to select sky condition wind speed wind direction temperature and humidity on the Weather Notes screen e How to create notes and create edit or select spray tips for spraying operations on the Xtra Notes screen Toolbox Diagnostics Remote Valves On the Home screen press the Performance icon to access the Performance screens Sertormance WO Tee ra F E Data Management Calibration Electronic EOR Work Condition RCIL11DSP108BBG 1 Press the E Notes icon in the navigation bar Profile Setup NOTE Since the E Notes icon is shaped like a down arrow it opens a series of sub menus for the E Notes application RCIL11DSP545BBG 2 3 163 3 SETUP Field Notes screen The Field Notes screen displays by default If a different E Notes screen displays press the Field icon on the navigation bar to access the Field Notes screen Use the four windows with predefined lists to select the soil type soil moisture soil condition and crop residue for the current field The lists offer standard classifications to be used for all fields a
29. la Sequence MS rr Delete Deleting sequences requires AA am Delete Y e Selection of Sequence in the Data Type window e Selection of All or a specific implement in the Imple ment window e Selection of All or specific sequences with the Se quence window This data type is unique to tractors All Es RCIL11DSP352BBG 39 Spray tip Delete Since each spray tip has a unique ID only delete a spray tip if you are sure that you have no future use for the spray tip Re creating the same spray tip at a later time results in a new spray tip with a different ID requiring more man agement effort with the desktop software XX DR110 08 Deleting spray tips requires X ER110 08 e Selection of Spray Tip in the Data Type window Enter All e Selection of All or specific spray tips with the Spray Tip window This data type is unique to any vehicle or implement that performs spraying particularly towed sprayers and self propelled sprayers Stored name Up to 200 stored names can be saved on the memory stick at one time Deleting a stored name removes the stored name and any calibrations previously saved for that profile Stored Name X lt Magnum 335 1 D lt Magnum 335 2 Enter All Deleting stored names requires e Selection of Stored Name in the Data Type window e Selection of All or specific names with the Stored Name window Delet
30. window to Advanced Each individual application harvesting planting spray ing controls the effect of the Basic or Advanced set ting on that application Choosing Basic simplifies the structure of farming data fewer windows are required to perform operations and temporarily store information in display memory The Ba sic setting prevents logging to the memory stick so the increased simplicity also means that the summary data and the production results will not be available for analy sis in the desktop software Press the Interface Level window to display the pop up options window Press the desired interface level to change the setting Press the Close x button to exit the window without changing the current setting RCIL11DSP116BBG 10 If the interface level is changed a message displays The El change requires the display to perform a full reset To Ela Month continue select Yes or select No to cancel Press the Yes button to confirm the change and restart the display Press the No button to cancel the request The change requires the AL display to dis a full Yes Efor No to cancel a RCIL11DSP117BBG 11 2 27 2 ICONS AND WINDOWS Backlight Press the Backlight window to access the pop up bar graph window NOTE Some vehicles support both a daytime and a night time setting for display brightness Tu
31. 3 86 3 SETUP Press the Right Offset window to access the numeric 0 keypad Use the keypad to enter the value in meters feet Enter a negative value using the minus symbol Press the Enter button on the keypad to save the value Press the Close X button to exit the keypad without changing the value RCIL11DSP492BBG 20 Height Offset The height offset z axis is the distance from the bottom center of the GPS receiver to the ground This value must be a positive number NOTE Position the vehicle on flat level ground to mea sure height offset RCIL11DSP310BBG 21 Press the Height Offset window to access the numeric E GPS Setup keypad GPS nos Connection Type Wicons Y Use the keypad to enter the value in meters feet Height Offset Xe Press the Enter button on the keypad to save the value CO Press the Close XI button to exit the keypad without ajajaja f changing the value 5 6 7 8 f DORS SS Enter RCIL11DSP396BBG 22 3 87 3 SETUP Logging Interval Use the Logging Interval window to set how frequently GPS spatial data is logged to the memory stick for the work in progress If required increase the interval to re duce the space required for GPS data on the memory stick The acceptable range is 1 3 s The default value is 1 s This is an appropriate setting for most operations NOTE If the Logg
32. 61 2 ICONS AND WINDOWS Press the Activate button on the screen to activate the BERR en Software Activation Display Serial Number AUT ALT Activation Code PANTEA application RCIL11DSP029BBG 6 A confirming message displays Code Activated TJ E Display Serial Number Press the Ok button to clear the message RCIL11DSP015BBG 7 The screen updates to list all of the applications that have been activated on the display Display Serial Number The screens and windows of new application are now ivation Cod Activate available on the display aaa Status Software name Activated Back E GPS PF NAV 7 tate RCIL11DSP016BBG 8 2 62 3 SETUP 3 SETUP PRECISION FARMING APPLICATION BUILDING BLOCKS Introduction The Precision Farming application adds a unique set of tools to enable data collection Precision Farming is trans parent when present but it can be used by most applications on the display lts presence is indicated by a common set of screens that it adds to the Performance Diagnostics and Toolbox screens This chapter explains e The building blocks of the Precision Farming application grower farm field task crop type tag on the Profile Setup screen Home gt Performance gt Profile and on the Run screens e The additional tools implement work condition operator ope
33. 7 OR e Press the multipurpose window in the lower left hand corner of the screen to display the pop up options win dow Field Map Item FD765 Boundary NY Boundary p gt ooo RAIL12DSP0983BA 8 4 28 4 OPERATION Press Select on the pop up options window RAIL12DSP0987BA 9 A list of map items displays Press the desired map item The selected map item highlights in blue Boundary X Boundary The selected map item highlights in blue Field Map Item FD765 Boundary y Boundary P gt Deiete RAIL12DSP0986BA 11 4 29 4 OPERATION Delete a map item To delete the selected map item press the Delete but ton Boundary Boundary2 lt A pop up confirmation window displays Delete the se lected map item Press the Yes button to delete the selected map item Press the No button to return to the Map Management screen without deleting the map item RAIL12DSP0989BA 13 Rename a map item To edit the name of the selected map item press the multipurpose window in the lower left hand corner of the screen Field Map Item FD765 Boundary a Boundary Boundary 1 ad a Delete Back import Filter Delete Map RAIL12DSP0983BA 14 4 30 4 OPERATION A pop up options window displays Press Edit Name to access the alphanumeric keypad Use the keypad to change the name of the selected map MN E item
34. AA eee Bea St ne ea nS bea eh he anand Roe eit UM fe GRRE Ae ad 4 35 Multiple vehicle practices cnc ecuettig ts Se ede A ea ek eee AS 4 36 Rotating memory stick practices wu 2s waders ecdinee andes wadeie weew lc A a A 4 37 OPE ON vate oes a doo oat 4 1 DS Eeer men eeraa aa ee a a eed Ba a SRO SAS A 4 8 Filter List Screen Crop type lle a ante a a da dd da A EA E Maa 4 6 AMPON SCFEOM ida o il A A dit E E E dn 4 3 Map Management screen ic 42 tactew bbe nannaa 4 26 INMFOCUCTION 6 4 lt 4 20 A e a A a Cee E a a a CA ele A 4 1 gota o aneren a a O a a sage et a ene dh Res aa A A 4 35 Multiple vehicle practices naaa annann A A AAA A A AA AA 4 36 Rotating memory stick practices o oooooooonr eee eens 4 37 ey Ad ct Se cae 7 4 Beco DR aceon epee eee te bb a 3 139 Panning ONING ss una odas aaa as toos Gs ele Sk i ee SR a een tds 3 148 Pann SONNI O Iturbe tds db tacita 3 139 SETA otras aes ee ae Deane aasa wun cee Gaee seme ce eeeceasosuersencesawesceetaea sacs 3 1 Constellation Map Screen 3 135 DGPS Alarm and DGPS Type WINdOWS ooooo ee een eee eee tenn eas 3 90 iF TE IGHINOLESs SCICON Zac 6 ice onl ia ad dde a oe aldas de ld 3 164 GPO Receiver Screen a CEA 2 bt he il DO eee 3 137 GPS SEUD SCI GEN 2 trata decund a am a hatin a a whee rote te Why ema ees hte ee ado ees Selene S 3 79 OPO als SC tb ee ook Se Na EE SE ais 3 125 TE FONG SEP SCS asia A BF Cac ho ess nana aso cia are 3 1 Resourc
35. Boundary Name Press the Enter button on the keypad to save the name Press the Close button to exit the keypad without chang ing the name View map item information To view detailed information about the selected map item press the multipurpose window in the lower left hand cor ner of the screen Field Map Item FD765 Boundary y a Boundary Boundary 1 a ie Delete RAIL12DSP0983BA 17 4 31 4 OPERATION A pop up options window displays Press Info to view detailed information about the selected map item NOTE The information displayed is determined by the map item type and subtype Press the OK button to return to the Map Management screen Edit a the subtype of a map item Coverage NOTE Only obstacles and inner boundaries have sub types To edit the subtype of the selected map item press the multipurpose window in the lower left hand corner of the screen A Field Map Item FD765 Obstacle Y Obstacle Obstacle 1 E po Delete 30 RAIL12DSP0995BA 20 4 32 4 OPERATION A pop up options window displays Press Edit Subtype to access the list of subtypes Press the desired subtype in the options window Set or clear impassible To change the impassable setting for the selected inner boundary press the multipurpose window in the lower left hand corner of the screen 4 33 ID E ac e Obstacier lt Q gt Delete i Field Map Item
36. DOP E a a Wide Web ste Ita did Five or more satellites are required to initialize the sys Warren ForMultistaton Analysis tem Four or more are required for automatic operation en Fees coll a To daplay visibility graphecally e For DOP any number below 7 offers good working re PP auh To generate reports sults DOP can be graphed five different ways geomet a eek OMITA rical position horizontal vertical and time Position de ie tious Planning DOP offers the best DOP overview Horizontal DOP ihe Ao up y e o you need to effectively uso the full power and capablitios of Planning E also describes bow to and vertical DOP display the data by axis to indicate uas Planing whether an obstacle is going to be a problem NOTE The software offers additional information on all 4 program features under the Help menu RCPH11DSPO19BBG 18 3 144 3 SETUP ON Elevation A A Reached Elevation EREEREER mi Tet TT ts al S VNA e AND i yan Ky f K 104 AAA ha e Me aN y oan ue A i a Pat A 24 00 Station Racine WI North 42 43 West 87 47 Height Om Elevation cutoff 10 Obstacles 0 Time 029 2012 00 00 8 27 2012 00 00 UTC 5 0h Satellites 62 GPS 31 Glonass 24 WAAS 7 almanac alm 8 29 2012 RAPH12DSP0978FA 19 Elevation ON Number of Satellites Visibility a A ee aa Number of Satellites Station Racine Wi North 42 43 West 67 47 Height Om Elevabon cutoff 10 Obstacles
37. GPS Location Connection Type Custom NY Logging Interval pape Alarm l DGPS Type Forward Offset RTK Nilooo00om RTK RTX Source Right Offset AgGPS Radio Y 0 000 m Channel ID Height Offset No Radio N 0 000 mm MEN GPS RAIL12DSP1310BA 10 EN i E GPS Setup A ATK Security GPS Edit Reset serial Number nannnnnnann Activation Code Activate RAIL12DSP1338BA 11 Press the Key 1 window to access the alphanumeric HTA keypad 3 98 Key 4 Key 5 Enter a Key of Active X Invalid Expired OK Subscription Key Oper Layout Impl Vehicle aps RAIL12DSP1339BA 12 Use the keypad to enter the subscription key for the base El GPS Setup station Press the Enter button on the keypad to save the key RAIL12DSP1340BA 13 If the RTK security key is not 16 characters a message GPS Setup displays RTK security key must be exactly 16 charac ters Input Error Press the Ok button to acknowledge the message and return to the keypad RTK security key must be exactly Enter a 16 character RTK security key 16 characters RAIL12DSP1341BA 14 A green check displays beside the key when the following three conditions are true se S e The subscription key is correct e The subscription key is current not ex Key 3 pired Key 4 e The GPS receiver is connected to the e base station gait f Active X In
38. HHH Field Mark Setup been set up ae Field Mark 1 Button Type Field Mark 2 Button Type Field Mark 3 Button Type Field Mark 4 Button Type RCIL11DSP291BBG 12 3 78 3 SETUP PRECISION FARMING APPLICATION GPS RECEIVER SETUP GPS Setup screen This chapter continues information on the Precision Farming application and explains the GPS Setup screen Home gt Toolbox gt GPS On the Home screen press the Toolbox icon to access the Toolbox screens piagnostics Remote Valves A Y Work Condition Data Management Calibration Electronic EOR Press the GPS icon on the navigation bar to display the Ea GPS Setup screen GPS Location Not Installed Not Installed is the default status for the GPS Location window When Not Installed is selected no receiver setup options or GPS Run screen windows are avail able RCIL11DSP292BBG 2 3 79 3 SETUP Write to Card The Write to Card window is only visible when the GPS Location window is set to Not Installed The Write to Card window is available when farming soft ware supports data logging but no GPS receiver is in stalled on the vehicle Input from crop sensors and area counters is recorded directly to the internal memory of the display but is not mapped NOTE The Write to Card window is only available when Advanced is selected
39. Hardware Drivers Shared resources may be operator preferences imple ment descriptions crop types grower farm field task structure etc The operator enters this information once The information is then available in any application on the display even if the operator moves the display to a different vehicle RCIL11DSP074BBG 1 Standard pop up keypads and options windows are ex amples of shared tools The same tools are used to create lists select options and enter names or values The op erator only needs to learn these tools once because they are the same in every application on the display Common icons and Home screen organization simplify navigation through all applications on the display Vehicle Increasingly the AFS Pro 700 display will be an opera tor s primary tool for interfacing with the vehicle whether a tractor combine or sprayer On many vehicles the op erator controls automated steering with the display On some combines today the operator not only monitors har vest operations but also controls them directly from the display The vehicle uses the display to communicate its unique control and monitoring needs to the operator while offer ing greater performance control and feedback 1 1 1 GENERAL ISO 11783 Created by the International Organization for Standard izations ISO ISO 11783 is an electronic standard for agricultural equipment The goal of ISO 11783 is to increase far
40. RCIL11DSP001GBG 3 Home screen combine example Toolbox Diagnostics Remote Valves D Y Work Condition N Electronic EOR 12 34 PM Jun 15 2012 RCIL11DSP002GBG 4 Home screen tractor example 2 13 sl 2 ICONS AND WINDOWS Home screen area The icons on the Home screen organize the screens for all farming applications by function Autoguidance performance planting harvesting and any vehicle specific applications can add components to these navigation icons Diagnostics Calibration Performance Data Management RCIL11DSP003ABG 1 Press the Toolbox icon to access screens for setting display preferences and operator preferences customizing the Run screens setting up the GPS receiver etc The selections vary with the applications that are Display Operator Layout Precision Marks installed The Toolbox screens provide the location where shared tools can be configured RCIL11DSP001ABG 2 Press the Run icon to access the six customizable screens for all applications that are installed on the display These are the screens that the operator normally uses while operating the equipment NOTE The names for the Run screen navigation icons cannot be edited RCIL11DSP004ABG 3 Press the Diagnostics icon to access screens for checking software
41. RCIL11DSP245BBG 32 3 32 3 SETUP Press On to display autoguidance swaths with the other ES active map layers Yield bu ac Press Off to hide the swaths Press the OK button to save the selection and close the Map Layer window raK Plank Road Run2 Run3 Rund RCIL11DSP246BBG 33 Data Style Use the Data Style window on the Map Layer window to change the appearance of the data layer on the map The data layer is the yield moisture fuel economy or as applied product map that is created by the resident applications The data style can be e Color e Gray OR e Off hidden RCIL11DSP260BBG 34 RCIL11DSP261BBG 35 3 33 Press the Layer button to access the Map Layer win dow Press the Data Style window to display the pop up op tions window Color Color RCIL11DSP275BBG 36 Press Off to hide the data layer Press Color to display the data layer in color Map Layer Fuel Economy Vip Press Gray to display the data layer in gray scale Press the OK button to save the selection and close the Map Layer window RCIL11DSP276BBG 37 Rx Style The Rx Style prescription style window is only avail able with the As Applied application for planters seed ers and sprayers The window determines how a pre scription map appears in conjunction with the as applied
42. Run screens If a crop is not selected on this list it cannot be selected in the Crop Type window NOTE The crop selection list varies by vehicle type combines tractors etc Press the box IX next to the crop name to select or de select it depending on its current state An X indicates that the box is selected Press the None button to deselect all crops Press the All button to select all crops Press the arrows on the scroll bar to page down or up through window entries When you are satisfied with the selected crops press the Enter button to save the selection Diagnostics Remote Valves Work Condition Electronic EOR RCIL11DSP108BBG 1 ME Filter List Filter Crop List Filter Delete Map na 2 Filter List Filter Crop List Alfalfa Barley Fall Barley Spring Barley Winter Beans Adzuki Beans Broad X Beans Edible Enter All None ok a RCIL11DSP305BBG 3 Yy 4 OPERATION The Crop Type window s list displays only the crop types Profile that are selected in the Filter Crop List pop up window NOTE Crop type names cannot be edited RCIL11DSP214BBG 4 4 7 4 OPERATION Delete screen Use the Delete screen to manage the information on the memory stick Deleting data types farm field task etc removes the information from both the display memory and the memory stick This information ca
43. The navigation icons for the sub menu displays ay Envir VT Preferences Oct NAT The presence of a second icon 1 in the screen label indi LAS Imperial USA cates that these screens are a sub menu of the Toolbox screens Distance Area Press the Back icon 2 on the navigation bar to return Volume Mass to the main Toolbox screens Temperature Pressure Metric Metric 2 Force Other Pref RAM NvmM About RCIL11DSP462BBG 12 This same operating pattern applies to all of the functional icons and their screens 2 ICONS AND WINDOWS Status and warning icon area The vehicle determines the location and the size of the status and warning icon area The status and warning icon area may have two or three rows It may be located at the top or at the bottom of the left hand area Nonetheless the status and warning icon area has the same function across all vehicles and applications The icons behave in the same way across all vehicles and applications The status and warning icon area is present on all screens and has two basic functions e The warning icons alert the operator that some compo nent is not functioning as expected e The status icons alert the operator about the current state of an event RCIL11DSP104BBG 1 Red is the color of danger Icons that report danger flash continuously and are always shown first in the status area These icons only clear when the dangerous co
44. The serial number that appears on this screen is cit ta Ea GPSSetup the number that OmniSTAR requires to provide an acti A GPS Sill E vation code A G PO Pa Reset Press the Activation Code window to access the pop up Serial Number nnnnnnnnnn keypad Activation Code nm gt ae in the Activation Code window RAIL12DSP1399BA 25 3 118 3 SETUP Press the Activate button to activate RTX correction El GPS Setup Serial Number nnnnnnnnnn Activation Code Activate o DOcon RAIL12DSP1380BA A pop up information message displays Code acti el o GPSSetup vated ua Code Activated Code Activated Press the Ok button to dismiss the message Disp de Layout Imp Vehicle GPS b Press the up arrow on the scroll bar to return to the first page of the GPS Setup screen RAIL12DSP1388BA 27 Press the DGPS Type window to access the pop up op EETA El a GPS Setup tions window GPS Location Connection Type d pa custom_ Mican Logging Interval DGPS Alarm Second YiNno Y DGPS Type Forward Offset 6 000 m Right Offset DGPS Backup ves Moon Position Recall Height Offset Disable Y 0 000 m Convergence Status Converge Distance RAIL12DSP1377BA 28 3 119 Press RTK Emo A GPS Setup RAIL12DSP1381BA 29 The RTK RTX Source window is added to the screen GPS Setup eR Type pop up O ptio
45. The wrong value was entered for the offset amount OR e The wrong direction was entered for the offset a pos itive value was used for the offset amount instead of a negative value or vice versa The swath map can also reveal problems with the implement width or header width definition e Ifthe same value is entered for swath width or working width and implement width or header width a skip is present between each pass e If the values for implement width or header width and swath width or working width are switched each pass Farm overlaps the previous pass SEE ee Plank Road RAIL12DSP1006BA 16 3 44 3 SETUP Swath Map The swath map also shows any intentional overlaps that El Run 6 are created when finishing a field E 90 RCIL11DSP044BBG 17 3 45 3 SETUP PRECISION FARMING APPLICATION FIELD BOUNDARIES OBSTACLES AND MARKS Introduction This chapter explains e How to create field boundaries e The boundary warning behavior e Windows that are directly related to field boundaries e How to create field obstacles e The obstacle warning behavior How to create field marks Field boundaries Field boundaries can be created with the display when Rec Boundary De i e oi i Rec Obstacle e The Precision Farming application is present AND e The vehicle is equipped with a GPS receiver NOTE The memory stick must be present when the
46. a new farm with a different ID requir ing more management effort with the desktop software Delete Farms are deleted in the same fashion as growers To delete all farms from display memory and the memory RCIL11DSP316BBG 10 stick 1 Select Farm in the Data Type window 2 Press the Grower window to select All for all grow ers on the memory stick 3 The Farm window defaults to All when All is se lected in the Grower window Press the Delete but ton to delete all farms on the memory stick 4 Press the Yes or No button at the confirmation mes sage To selectively delete farms from display memory and the E Delete memory stick Data Type Delete 1 Select Farm in the Data Type window 2 Press the Grower window to limit the selection to a specific grower 3 Press the Farm window to access the pop up options window X Plank Lane Enter All None 4 Select the farms to be deleted NOTE If only one farm is present on the memory stick the farm s name automatically populates the Farm window 5 Press the Enter button to confirm the selection 6 Press the Delete button to delete the selected farms RCIL11DSP317BBG 11 7 Press the Yes or No button at the confirmation mes sage 4 OPERATION Field Select Field to delete all information related to the se lected fie
47. access the numeric keypad Use the keypad to enter the number Press the Enter button on the keypad to save the num ber See 2 7 for more information about keypads RCIL11DSP088BBG 12 2 5 2 ICONS AND WINDOWS Bar graph windows Bar graph windows appear in many shapes and sizes throughout the various applications They generally work in the same manner Press the bar graph to access the pop up bar graph win dow RCIL11DSP089BBG 13 Press anywhere on the bar graph to immediately adjust the field to a new setting OR Press the right or left arrow buttons to increase or de crease the value by a preset increment for example 1 5 or 10 provided for this type of bar graph Press the Enter button to save the setting Settings take effect when they are saved Press the Close X button to exit the window without changing the setting RCIL11DSP090BBG 14 2 6 2 ICONS AND WINDOWS Keypads Alphanumeric and numeric keypads are part of the Operator Setup Framework software on the display They are available to all of the applications on the display x Each application changes the keypads to fit its needs Because ISO 11783 implements upload their own soft ware to the display the character sets on the alphanu meric keypad may vary between your Case IH farming software and software that is loaded into the VT appli cation virtual terminal In genera
48. are named inconsistently RCIL11DSP535BBG 9 2 32 2 ICONS AND WINDOWS Duplicate names are not permitted If you attempt to save a name that already exists a message displays Dupli cate name exists Enter another name The message occurs when the Enter button on the key pad is pressed Press the OK button to acknowledge and clear the mes sage Press the Close X button to exit the keypad without changing the original name or use the keypad to modify or select a variation on the name to continue Operator preferences Operator preferences can be changed at any time by modifying selections on the Operator Setup screen The settings are immediately recorded for the selected operator as the settings are changed The settings are used across all applications that are installed on the display Units Press the Units window to display the pop up options window for units of measurement Available selections are Metric e USA e Imperial Press your preference to change the setting Press the Close X button to exit without changing the current setting Grid Lines Grid lines are the vertical and horizontal lines that sepa rate the windows Press the Grid Lines window to access the pop up op tions window Press No to turn grid lines OFF or press Yes to turn grid lines ON Press the Close X button to exit wi
49. are duplicated when performing the calibration the more reliable the results will be To get the best results from the procedure e The vehicle with its implement or header must be fully set up and operational e Tires must be inflated to the proper pressure e Calibration must be performed in the field in soil and conditions like those where work will be performed e The storage container s on the vehicle and or imple ment tank hopper basket etc should be half full to average the fill level 3 151 Radar calibration generic tractor On the Home screen press the Calibration icon to ac cess the Calibration screens Press the Radar icon in the navigation bar to display the Radar Cal screen NOTE The Radar Cal screen is not available if radar is not enabled on the Vehicle screen Home gt Toolbox gt Vehicle To perform radar calibration 1 Measure a course with a distance of at least 121 9 m 400 ft and place a marker at the beginning and end of the measured course A 121 9 m 400 ft course is shown in this procedure This procedure shows metric measurement Standard units were selected screen values will be in feet NOTE When determining course length a measuring tape is preferred over a measuring wheel because a measuring tape provides greater accuracy 3 SETUP If U S 3 152 Toolbox Remote Valves Diagnostics
50. close all files in display memory or on the memory stick The screen displays a DO NOT REMOVE THE MEM ORY STICK icon until the display is completely powered OFF Data loss may occur if the memory stick is removed before all files are properly closed The display sounds three short beeps when the process is complete The absence of the short beeps may indicate that unswitched power to the display is not present Absence of unswitched power can result in the loss or corruption RAIL12DSP1373BA 9 of information on the memory stick Check the cab unswitched power fuses for the display or contact your Case IH dealer for assistance This problem must be resolved for the display to function properly 1 GENERAL Desktop software Desktop software is a generic phrase that is used throughout this manual The phrase refers to the software that is loaded on your home or business computer for organizing and analyzing your farming data and activities NOTE The desktop software is only used with applica tions that log data To take full advantage of the farming applications on your display you must use e Case IH AFS Harvest and Application Control Systems version 12 or higher OR e AFS Office version 2012 or higher Contact your Case IH dealer for more information Both software packages offer a clean migration path for all of your accumulated Case IH harvesting and product application data from previous years Other
51. field Weed Rock conditions appear on the maps Field Marks 3 4 when enabled along with the other Tile sa active map layers All field marks appear as small circles An operator can mark locations on the map with the Field Marks 1 2 and Fields Marks 3 4 windows on the Run screens NOTE See 3 74 for information about field marks Farm Field Plank Road FD321 i RCIL11DSP240BBG 26 3 30 Press the Layer button to access the Map Layer win dow Press the Marks window to display the pop up options window On le Color y Color Ny Far Plank Road A i Run2 Run3 Rund RCIL11DSP241BBG 27 Press On to display field marks with the other active map layers Map Layer Press Off to hide the field marks lata Type Yield NM NOTE Field mark locations are saved to the memory stick regardless of the setting in the Marks window This set ting only determines whether the marked locations are shown in the map windows Press the OK button to save the selection and close the Map Layer window OK PlankRoad FD321 RCIL11DSP242BBG 28 Swaths The autoguidance swath pattern appears on the map when enabled along with the other active map layers The map window shows the current swath red line and the three swaths blue lines to the immediate left and right of the current swath If present in the map view
52. field A field can contain multiple boundaries and all boundaries are deleted when the field is selected either individually or within its farm and grower structure To delete all boundaries from display memory and the memory stick 1 Select Boundary in the Data Type window 2 Select All in the Grower window NOTE Only growers that have boundaries saved to the fields of their farms display If only one grower is present on the memory stick only one grower is available for se lection 3 The Farm and Field windows default to All when All is selected in the Grower window 4 Press the Delete button to delete all boundaries on the memory stick 5 Press the Yes or No button at the confirmation mes sage To delete a specific field s boundaries from display memory and the memory stick 1 Select Boundary in the Data Type window 2 Use the Grower window to filter the boundaries to all or one grower 3 Use the Farm window to filter the boundaries to all or one farm NOTE Only farms that have boundaries saved to their fields display If only one farm is present on the memory stick with boundaries saved to its fields only one farm is available for selection 4 Use the Field window to filter the data to all or se lected fields 5 Press the Enter button to confirm the selection 6 Pressthe Delete butto
53. gt Delete screen removed from the memory stick soon PF 106 Memory device full Data logging disabled Archive data on There is no more memory space data card and remove unwanted files remaining on the memory stick Data via Home gt Data Management gt Delete will no longer be saved to the device screen maximum file size ensure that data continues to be logged PF 108 Map memory Warning New data will be recorded but The current on screen map data size exceeded not shown on display map has been exceeded Data will continue to log to the removable memory stick but will not be displayed A new field PF 101 PF 102 PF 103 PF 104 Data card removed Data logging disabled Insert data card and recycle power to enable data logging must be selected or created to view new map data PF 109 Area calibration not The area calibration is out of the Perform a new area calibration for the valid acceptable range current grower farm and field Home gt Calibration gt Area 9 DIAGNOSTICS 9 10 6 PRINTER APPLICATION 6 PRINTER APPLICATION Introduction Although distributed largely with software for combines the Printer application is available for any farming operation where capturing the content of the reporting windows on a screen is beneficial to an operator The software is primarily intended to capture the content of Toolbox The content of the windows is sent to a c
54. h sce cass nats ese dda oseds ode ook wee aneew netenteaued setae st eoeeueosute 6 7 7 THIRD PARTY SYSTEMS MOUGU AMAIA 1 1 Rawson AcoU Rale SySle Misionera sins ia e AR A AAA gota ohawe 1 1 Raven variable rate system occcccoccccccccccccnnn eee e eee e eee neeeneeeeeenees 1 2 PAR COMMOMSYSICM script ia 1 3 Plext Coll CONTO SYSE M srta aio oa 7 4 8 TELEMATICS APPLICATION FEICMIAlICS Screen ironia alae 8 1 Text Messages Received screen 2 ccc eee e eee e cence eee rrara nnne 8 8 1 GENERAL 1 GENERAL Introduction The AFS Pro 700 display can serve as the operator interface for e Precision planting harvesting and spraying e Vehicle specific applications for example yield monitoring as applied or prescription planting performance monitoring e AFS AccuGuide e The virtual terminal for vehicles implements and systems that conform to the ISO 11783 standard Layered architecture The display uses a layered software architecture to greatly simplify the learning curve for any operator Each layer inherits the capabilities of the previous layer This creates standard resources tools and screens for all applications on the display Applications Vehicle Framework Framework Shared resources tools and screens the Framework layer in the illustration mean that the operator can spend Operating System less time learning and more time using the applications on the display
55. ha h 3 Press a location on the Run Layout screen to display the window options list 4 Press a window label for placement 5 Repeat Steps 3 and 4 until the layout is complete RCIL11DSP464BBG 21 2 44 2 ICONS AND WINDOWS Because the vehicle owns the left hand area there are some differences between the selections for Run screens and the selections for the left hand area e The left hand area is a single column layout with fewer row selections to ensure readability a Engine Power sal sarc Oy Zs Work Rate AAA A Y RCIL11DSP465BBG 22 e The vehicle limits the selection of windows to reporting El windows that are appropriate to the left hand area E A A a A neee RCIL11DSP466BBG 23 2 45 2 ICONS AND WINDOWS Summary Data screens Precision Farm ing application required An operator can also use the Run Layout screen to customize the Summary Data screens Home gt Per formance gt Sum1 Sum2 The Summary Data screens contain performance information that is appropriate to the vehicle and its function For example the summary content for tractors differs from the summary content for combines Refer to the appropriate software operating guide to understand the purpose and operation of the Summary Data screens before customizing these screens To customize a Summary Data screen 1 Select Summary Data 1
56. harvest logs created with JD Greenstar New Holland or Ag Leader yield monitor systems can form the building blocks for your farming needs Whether your experience level with the Precision Farm ing application is expert or novice check with your dealer for training on the tools that are available for the desktop software and the display software Desktop computer is another generic phrase used in this manual to refer to the computer that runs the desktop soft ware The desktop software will operate on any personal or business computer with these requirements Component Minimum Recommend Fem for ere faster Operating system Windows XP SP3 256 MB RAM 1 GB RAM space DVD RW 16 bit color 24 32 bit color Printer______ ________ Color Modem Cid _____ 56Kbaud Port for memory USB 1 0 port USB 2 0 port stick 2 ICONS AND WINDOWS 2 ICONS AND WINDOWS TOUCH CONTROLS Introduction Display Setup Day Night Minute 32 0 Interface Level Advanced W Current Vehicle Generic Tractor__ 1 10 sect o over teow Poors Pore A RAIL12DSP1374GA 1 Your display features a touch sensitive screen The operator makes selections and enters information by pressing windows icons or buttons that are displayed on the screen 2 1 2 ICONS AND WINDOWS Windows All screens on the display are composed of windows ex ceptforthe Home screen explained late
57. in the Interface Level window Home gt Toolbox gt Disp NOTE This functionality is retained for some combines The combine must be equipped with ground speed header height and crop sensors to use this option When the Write to Card window is set to No the system does not check for the presence of the memory stick Op erational summary data is logged to internal display mem ory only When the Write to Card window is set to Yes the sys tem does check for the presence of the memory stick Operational summary data is logged to the memory stick when supported by the vehicle software When the system is configured for GPS the Write to Card window is automatically set to Yes The window is not available since all GPS data is recorded to the mem ory stick Press the Write to Card window to display the options window Press Yes to enable the option Press the Close X button to exit the window without changing the setting EJ _ iw Write to Card _ nin a Write to Card RCIL11DSP293BBG 3 3 80 3 SETUP GPS Location Tractor example If a GPS receiver is installed on the vehicle press the GPS Location window to display the pop up options Silii GPS Location window The options displayed in the window are Pee H vehicle dependent The options include Not Installed Custom e Model specific loc
58. op erator creates a boundary on the display NOTE Field boundaries can also be created with the desktop software The Rec Boundary window placement label Boundary Record is not part of the default layout and must be added to a Run screen If required create a new name in the Current Layout window on the Run Layout screen and SBS 1 add the Rec Boundary window to the Run screen of your choice Home gt Toolbox gt Layout One field can contain multiple boundaries depending on the swath patterns that are needed to work the field All boundaries are saved to the field If a field is deleted on the Delete screen Home gt Data Management gt Delete all of the boundaries for the field are also deleted Delete individual boundaries using the Map screen Home gt Data Management gt Map 3 46 Create a boundary ec Obstacle Rec Boundary _ With the vehicle in an appropriate location in the field Ll 1 1 1 O press the Record button to begin boundary creation NOTE The software adds a safety margin to the width of the implement or header for whenever the vehicle passes close to a boundary 1 m 3 ft or 10 of the implement width or header width whichever is greater The warning behavior for a boundary is triggered based on the implement width or header width plus the safety margin RCIL11DSP051BBG 2 The Boundary Properties window displays
59. printer The Axiohm A630 printer is powered and connected to the RS232 port via the diagnostic con nector on the right hand control module 1 Kit 84095875 includes the printer 2 printer cable 3 and mount ing hardware 4 for this implementation This kit with supporting software allows the display to communicate directly with the printer via the Controller Area Network CAN RCPH11DSP025BBG 2 Other vehicles require a different implementation An adapter harness is required to connect the serial RS 232 port on the AFS Pro 700 display to the printer The adapter harness separates ports A and B on the main connection to the display For display ready vehicles an existing display harness connector is in the cab use adapter harness 87732647 For all other vehicles use adapter harness 87735690 With this harness installed Com A communication port A is the RS 232 port that is integrated into the main con nector harness on the back of the display the 26 pin con nector RCIL11DSP526BBG 3 6 PRINTER APPLICATION The types of ports that are available parallel RS232 USB and cables that are available for connecting a printer to the display will vary with the printer A 9 pin DB9 RS232 female connector is required to con nect the printer to the display at the display port The standard or optional cables for the printer may or may not support this connector Acquire any adapters needed a 25 pin
60. scroll bar to page down to the remaining information Press the OK button at any time to exit the information window Fault Archive ANNAN problem continues ae Occurrence Count 1 ighe Last Active 7 30 AM Jul 22 2012 RCIL11DSP165BBG 10 Fault Archive Fault Archive DH Last Cleared 8 30 AM LJ Jul 22 2012 A a RCIL11DSP166BBG 5 7 5 DIAGNOSTICS Erase faults 4 A Fault Archive To erase all faults in a selected archive 1 Select the desired controller with the Fault Archive window 2 Press Erase All in the pop up options window to erase the fault archive for the selected controller NOTE Faults with the AG and NAV prefix can only be deleted with the Delete screen Home gt Data Manage ment gt Delete See 4 8 Refresh the fault archive To refresh the screen display for a selected fault archive 1 Select the desired controller with the Fault Archive window 2 Press Refresh List in the pop up option window to refresh the screen display for the selected controller RCIL11DSP156BBG 9 DIAGNOSTICS Precision Farming fault table PF 100 GPS receiver Position data not available until The system has lost communication communication communication restored Check display with the GPS receiver Ensure that lost connection type Recycle power If the proper connection type has been problem cont
61. tags A maximum of 150 growers can be created Each grower is assigned a unique identification number A grower is an independent agri business A grower may work a single farm or many farms A grower may also provide contract services planting spraying harvesting to other growers As such the grower is always linked to a farm to en able the user to view all crop operations for an individual grower To add edit or create a grower with the display press the Grower window to access the pop up options window If no growers are available the only option is New 19 Thereafter the options are Select Edit Name or New Press Select to choose a grower from the user defined list Press Edit Name to change the name of a grower NOTE Do not use the edit function to create a new grower because it does not change the unique identification num ber assigned for the grower Press New to add a grower to the current list Press the desired option If Select is pressed a pop up options window of current growers displays Press the required grower The screen updates with the selected grower RCIL11DSP182BBG 6 RCIL11DSP183BBG 7 RCIL11DSP185BBG 8 If Edit Name or New is pressed the alphanumeric key pad displays Use the keypad to create or edit the name Press the Enter button on the keypad to save t
62. tec doses a wid ken ad tgs as ie cena noted Sante a Arkaba aera diese ed wteeaedl gt wines 1 4 ia o A A yo A E A yew tenes coat 1 1 Menta APP yest tN A ee ee 1 3 ICONS AND WINDOWS vanessa A ii 2 1 DOI y A Gale owe GE wn Gan ace a ene KEN oA A we PON as 2 23 AMOME 2S ONO Cllr AAA A O a a a a a a a a a a As aes centr a ete aed reetemae tents 2 14 Operator Setup Seremi delia a Sunes oud Boome eee Pa Re a aN pe aa Bap mee oe eee As 2 30 Precision Farming Setup screen 1 ee ee eee eee e eens 2 55 Run Layout screen Run screen customization 0 0 eee eee ene eens 2 3 Software Activation screen 2 60 Venicie Name WHIGOW vasca aout ik AS alt eee E E Sok nD SAAD Cm te ES ok ae 2 50 o A A cat cu Cite ats Seek Son te ott ire Ath Is we Nea a E Cua tata Last es eta 2 11 IMFOGUCTION Scho 3 4 2335 A ae e eed St ae EN 2 1 PMO GACT OID rata eo Se eke aed OS EA ers de oa ee Bit ee a a en oh 2 12 HVE OCHUIGU OM afk ETEA cea Se A T EE he at 2 23 ICC Ses sica aden rst Aue he ash sem Bes Sates cd tara ch SNe Sy Selah os e ne Geass Manin yaa Ne bate es SOs late 2 17 Laca A PR Rm EE a a Pe eC TE Ee ae PAS sO EA EE eS a a gO TE ENE Wee 2 22 Status and warning icon area a asas ua aaran in and eed Ged to ree Re bee dd 2 18 MAC A ates desta Sov es A yn ate AOI he ebb ey prc seem Se ph Raden ess es See eG RE ork dpe ene 2 2 MEMORY STICK MANAGEMENT 0ccceecsceneeesecneeeeceeueeesneuueesseeueessesuaunes 4 35 INFOAUCUON eeror n
63. the Home screen press the Calibrations icon to access the Calibration screens Press the Distance icon in the navigation bar to display ze Distance Calibration 3 SETUP Run Screens Performance Calibrations RAIL12DSP1031BA 10 the Distance Calibration screen Drive Course To perform distance calibration 1 Start Stop Measured Distance Actual Distance Dietance Cal Value 0 013599 _ E Update Cal Measure a course with a distance of at least 121 9 m 400 ft and place a marker at the beginning and end of the measured course A 121 9 m 400 ft course is shown in this procedure This procedure shows metric measurement If U S Standard units were selected screen values would be in feet NOTE When determining course length a measuring tape is preferred over a measuring wheel because a measuring tape provides greater accuracy RCIL11DSP388BBG 12 3 155 3 SETUP 2 Drive the vehicle to the start of the course and press wy Distance Calibration the Start button The vehicle can be moving or sta Drive Course tionary when the Start button is pressed t_ _i Start NOTE Careful alignment with the start position is crit py Distance ical for the most accurate results Actual Distance 0 m When the Start button is pressed the accumulating distance as measured by radar displays in the Mea sured Distance wind
64. the field for which area calibration was performed The calibration value is not applied to any other fields or newly created tasks This calibration is available whenever the Precision Farming application is used On the Home screen press the Calibration icon to ac cess the Calibration screens Press the Area icon in the navigation bar to display the Area Calibration screen Toolbox Diagnostics Remote Valves A Y Performance Work Condition Data Management Calibration Electronic EOR RCIL11DSP108BBG 1 Area Calibration RCIL11DSP184BBG 2 3 158 To perform area calibration so Area Calibration 1 Press the Grower window to select the grower for the farm that contains the field that requires an area adjustment Select the appropriate grower from the pop up options window 2 Press the Farm window to select the farm that con tains the field that requires an area adjustment Select the appropriate farm from the pop up options window 3 Press the Field window to select the field that re quires an area adjustment Select the appropriate field from the pop up options win dow RCIL11DSP190BBG 5 3 159 3 SETUP 4 Press the Operation window if present to select the Area Calibration desired operation Select the appropriate operation from the pop up op tions window NOTE This window is only pres
65. the receiver is known NOTE The same window is repeated three times in these illustrations to show the text for the various technologies During operation the most common status message is a variation on the DGPS n message HP XP n RTK n RCIL11DSP370BBG 10 VBS n The message indicates e That the system is ready for use e The number of satellites that are in view e The type of correction that is in use During startup the most common message is Wait n The message indicates e That the system is acquiring satellites e The number of satellites that the system has acquired The table below explains the messages for the GPS Sta tus window the associated icons for the status and warn ing icon area and the meaning of each message RCIL11DSP37188G 11 GPS Status RCIL11DSP373BBG 12 3 128 3 SETUP GPS status table Message Status GPS Type Icon Indicator Not Installed none Any receiver The GPS Location window on the GPS Setup screen is set to Not Installed GPS Offline Any receiver The GPS Location window on the GPS Setup screen is set to Custom but no 4 data is detected from the GPS receiver and no data is detected by the NAV Il navigation controller if Any receiver N satellites are in view GPS position is available There are not enough satellites in view The system is not ready for use No DGPS n Any receiver
66. the recorded swath appears in olive green The start point green circle and stop point red star of the recorded swath also appear RCIL11DSP279BBG 29 3 31 3 SETUP The operator can view swath creation with a map window aA while recording a swath Legend Layer For curve and spiral swaths the swath being recorded ap pears as a black line and updates as each new GPS co ordinate is recorded An arrow indicates the vehicle loca tion The location where the Start button or the Mark 1 button was pressed appears as a black circle The num ber within the circle identifies which Swath Recorder win dow is in use Swath 1 Recorder or Swath 2 Recorder For circle swaths Mark 1 Mark 2 and Mark 3 points must be recorded before the swath can be displayed Farm Since the swath is completely recorded when the Mark 3 button is pressed the map screen immediately updates when the swath is selected For straight swaths and heading swaths the location where the Mark A button was pressed appears as a black circle Since the swath is completely recorded when the Mark B button or the heading is entered the map screen immediately updates when the swath is selected Farm Plank Road Press the Layer button to access the Map Layer win dow Press the Swath window to display the pop up options window Fart _ OK Plank Road
67. to the table below Name Seres Large tractor Magnum Steiger Medium tractor Magnum Mid range Puma CVX Current Vehicle Large Tractor Cotton picker Cotton Express Module Express Axial Flow 2X00 RCIL11DSP120BBG 14 Current Vehicle AFX Generic Combine Engish Advanced Y RCIL11DSP022BBG 15 Press the Close x button to exit the window without changing the current setting If the vehicle type is changed the display restarts to load the new vehicle application into display memory A message displays with the options to allow the display to restart or to cancel the vehicle change The vehicle type remains active until it is changed 2 29 2 ICONS AND WINDOWS Operator Setup screen Use the Operator Setup screen e To create the operator list for all applications on the display or select your name for work tracking e To select preferences for each operator Any changes made to the Operator Setup screen s windows while an operator is selected are automatically stored to that operator On the Home screen press the Toolbox icon to access the Toolbox screens Q wiagnostics Remote Valves A Work Condition RCIL11DSP108BBG 1 Press The Oper operator icon on the navigation bar to El access the Operator Setup screen AA Month Language Interface Level English V RCIL11DSP109BBG 2 C
68. troller Com3 Manager As Applied Precision Farm ing and vehicle software 3 kt Farm EES RCIL11DSP415BBG 2 Complete documentation for the Raven variable rate con trol system is available from your dealer 7 THIRD PARTY SYSTEMS HARDI control system A HARDI control system the HC 5500 can apply liquid MU O a A E Ej products with the AFS Pro 700 display Product applica A Hardi pis Switch tion is monitored and controlled with the display EEREN ZE 030 gal Hardi FGN Setup As applied results can be mapped or products can be applied with prescription maps Two HARDI controllers can be connected to the display A Hardi Rate Selection for great flexibility in section control Rate 1 Rate 2 i l E AO A Hardi Master A Hardi Controller gal a Required software for the display includes Hardi Con Legend Layer gt _ 3J tt 3J tt 3J kt troller Com3 Manager As Applied Precision Farm ing and vehicle software a gt A Hardi App Rt na 0 0 gare RCIL11DSP550BBG 2 Complete documentation for the HARDI control system is available from your dealer 7 THIRD PARTY SYSTEMS Flexi Coil control system A Flexi Coil rate control system can apply liquid granu lar or bulk seed products with the AFS Pro 700 display Product application is monitored and controlled with the display As applied results can be map
69. versions controller status specific sensor signals resource usage GPS signal status if equipped GPS receiver interface if equipped and fault codes RCIL11DSP012ABG 4 Press the Calibration icon to access the screens for vehicle and application specific calibrations such as distance area crop steering sensor etc RCIL11DSP005ABG 5 2 ICONS AND WINDOWS Press the Performance icon to access screens for viewing the active data set and analyzing operational results Press the Data Management icon to access screens for importing data filtering data deleting data and managing map items LE NOTE The remaining icons are more vehicle specific Refer to the vehicle operator s manual When any Home screen icon is pressed the application uses last screen recall to determine which screen to dis play NOTE The Toolbox screens are shown as an example The first time an operator enters the Toolbox screens in the current work session the first screen Display Setup is shown by default Thereafter when the operator enters the Toolbox screens the last screen that was viewed displays Last screen recall is used uniformly through all the func tional icons Last screen recall persists until the display is powered OFF at the end of the work session All Toolbox screens share the same navigation bar 1 at the bottom of the screen
70. window to access the numeric Sauer keypad NOTE The base station operator should provide you with the current channel ID for the base station Use the keypad to enter the correct ID number Press the Enter button on the keypad to save the setting en GPS Setup GPS Location Connection Type CANA N x A GPS Location Connection Type Customs Logging Interval pre Alarm l DGPS Type Forward Offset RTK _ _ Mlooom RTK RTX Source Right Offset AgGPS Radio _ 0 000 m Channel ID Height Offset Moom Layout IRCE GPS RAIL12DSP1308BA 8 a o SSS gt RAIL12DSP1309BA 9 3 97 3 SETUP If the Channel ID window displays the message No Ra dio and the window cannot be selected the NAV II navi gation controller cannot communicate with the RTK radio on the vehicle to retrieve its current network ID setting This may be caused by a missing or loose cable or a port configuration problem Contact your Case IH dealer The operator must input a subscription key to communi cate with any base station that is configured to use RTK security This key should be provided by the operator of the base station Press the down arrow on the scroll bar to view the second page of the GPS Setup screen Press the Edit button in the RTK Security window to access the RTK Security pop up window The RTK Security pop up window displays EJ IAE GPS Setup
71. 0 Time 9 79 2012 00 00 8 27 2017 00 00 UTC 5 0h Satelites 52 GPS 31 Glonass 24 WAAS 7 almanac alm 8 20 201 2 RAPH12DSP0979FA 20 Number of satellites 3 145 3 SETUP w 7 E A DON eeeeaeeees 12 00 15 00 Station Racine Wi North 42 43 West 87 47 Height Om Elevation cutoff 10 Obstacles 0 Time 8 28 2012 00 00 8 27 2012 00 00 UTC 5 0h Satellites 62 GPS 31 Glonass 24 WAAS 7 simanac alm 8 28 2012 RAPH12DSP0980FA 21 General visibility DOP all DOP all np a a O a EELEE Station Racine WI North 42 43 West 87 47 Height Om Elevation cutoff 10 Obstacles 0 Time 9 70 2012 00 00 8 27 2012 00 00 UTC 5 0h Satelites 52 GPS 31 Glonass 24 WAAS 7 almanac alm 8 20 201 2 RAPH12DSP0981FA 22 DOP all together lines 3 146 3 SETUP The same information number of available satellites and Planning Racine WI 6 26 2012 TAA ea time period can be viewed or AA Graphs ES OA INANE TES Peg liOSe ea From the Lists menu select Interval or DOP values Satellite Systems W GPS RAPH12DSP0982AA 23 3 147 Planning online GNSS Planning Online Satellite Library b s o Elevation Latitude MN 34 7828 i jw 92 4 55 Number of Satellites Longitude W 92 4055 Height m Cutoff 10 Visibility Day 18 30 2012 Sky Plot 3 SETUP Visible Interval 4 00 AM Time Span hours 24 World Vie
72. 11DSP217BBG 29 Press Edit Name to change the name of a tag Press New to create a tag RCIL11DSP218BBG 30 Implement if present The Implement window is only available in farming ap plications for tractors A unique identification number is assigned to each implement that is created When using multiple vehicles create implements on one vehicle and then transfer them to the other vehicles via the memory stick This ensures that implements are identified by a uniform set of identification numbers across all vehicles Refer to the tractor software operating guide for additional information In some cases specific vehicle settings are stored to the implement so the settings are recalled when ever that implement is used An implement can only be created or changed when the vehicle is not working that is no data is being collected RCIL11DSP219BBG 31 Press the Implement window to access the pop up options window 3 SETUP Press Select to choose the desired implement from the user defined list Press Edit Name to change the name of an implement Press New to create an implement with the alphanu meric keypad Crop Type Beans Soybean RCIL11DSP220BBG 32 3 SETUP Additional windows The individual farming applications determine whether the Work Condition Operator Operation and Opera tional Instance windows are required T
73. 15 PRECISION FARMING APPLICATION MAPS AND MAP TOOLS NEO CHU CULO Nori dades diana 3 21 WOK Ma DS nia rr darias iaa rabia A SW Dear io A A A EEE 3 39 PRECISION FARMING APPLICATION FIELD BOUNDARIES OB STACLES AND MARKS PVE CUES COIN rece Ge eee estes es A 3 46 RIESIG DOUNA LO Sa tata ted ae a le e a oO a a da o nets Be ee 3 46 FICIG OBSTaciOS cuidad eed bie rent arene tae ne wwe Sead weed ed bbe acia 3 62 FICIG IMaNKS rt tins bck Gaia bana tad E eee he hata SE a anaes E eta ano TE 3 74 PRECISION FARMING APPLICATION GPS RECEIVER SADA 19 GPS SOU SOON cria a DGPS Alarm and DGPS Type WINdOWS 0 00 cc cece cece cnn nt Real Time Kinematic RTK Setup 0 ccc ccc cnn 3 92 RTK setup AgGPS 450 900 radio 0 eect e eee n eens 3 93 RTK setup Ag3000 or DCM 300 modem 0 ccc ccc eee eee eens 3 103 OmniSTAR subscription Service setup ccc cece eect eeennas 3 107 AUTONOMOUS raw GPS SelUDssccictectae in ded int 3 124 PRECISION FARMING APPLICATION GPS AND RESOURCE STATUS INTOdUCIO Na SN nema aban ita Ae ae acacia atin 3 125 GPS SUS SCS israelita aaa dd 3 125 Constellation Map SCEN etern iaie a eee eee eee eee n eee EES 3 135 GPS RECEIVE SO Conan ddr dido 3 137 Resource status soii A 3 138 SATELLITE AVAILABILITY Planning SOWA E esineda acierta id 3 139 FFAG OMIM Sta iaa a2 T A oma teueareacs ret 3 148 PRECISION FARMING APPLICATION RADAR DISTANCE
74. 2 11 07 00P43 45 Crop Type Beans Soybean__ RCIL11DSP226BBG 7 RCIL11DSP227BBG 8 Operation if present The Operation window provides a predefined list of op erations from which to choose The Operation window is Se goad l oe Condition only visible in farming applications for tractors since ve PlanikRoad Dryfield hicles such as combines or cotton pickers have one oper ation harvesting Refer to the tractor software operating guide for additional information NOTE The software supplies the harvesting operation for combines and cotton pickers where needed NOTE When logging data only one operation can be as signed to a task Change the task first and then change the operation to ensure that data is retained for the previ ous and subsequent operation a i g RCIL11DSP483BBG 9 Press the Operation window to display the pop up op tions window Press the desired operation or choose Other if your cur rent activity is not listed C RCIL11DSP228BBG 10 Operational Instance if present Implement In many cases an operation is only performed once ina pit AE Farms Planter field for a crop type in a growing season plowing seed ing harvesting etc However there are circumstances where the same operation needs to be performed more than once in a growing season for a crop type The Oper ational Instance window is availabl
75. 3 137 3 SETUP Resource Status screen Press the Res resources icon on the navigation bar to EN Resource Status display the Resource Status screen Use the Resource Status screen to determine whether the available resources and memory stick capacity are sufficient for today s planned work The bar graph shows the total storage available and the percent used on the installed memory stick The resource usage windows show usage and availability for each data type Each memory stick may contain e 150 growers e 150 farms e 350 fields e 1200 tasks RCIL11DSP412BBG 1 e 100 tags e 250 products e 50 containers e 2000 autoguidance swaths 3 138 3 SETUP SATELLITE AVAILABILITY Planning software Trimble PRODUCTS amp SOLUTIONS Trimble E Workdwide ABOUT TRIMBLE INVESTORS SUPPORT amp TRAINING Planning Software Download Product Information Download More Info Leam More About GNSS Technology at Trimble Integrated Surveying Customer Stories Trimble GPS Data es E fare Planning Software gt D e Trimble Planning 7 a Downloads Setup Planning 2 4 August 2070 Installation program for the Trimble Planning software Download this file run the SetupPlanning 2 9 exe program and follow the screen instructions Note The new version number is 2 9 New key features are Improved Galileo support Improved Compass support Channel filter Glonass s
76. 4 46 18 44 51 36 GLONASS satellites are identified with the letter G after SI E A A the satellite number In this example 5G is a GLONASS E satellite Visio 15 NOTE RTX correction is only supported on AFS 372 re A A al ore veld ceivers RAIL12DSP1426BA 7 3 136 3 SETUP GPS Receiver screen NOTICE Only make adjustments on this screen if you are directed to do so by authorized Case IH service person nel Changing settings on the GPS receiver may disable your system The GPS Receiver screen or Receiver Diagnostic Inter face RDI is provided for advanced diagnostic and trou bleshooting procedures The screen provides access to the configuration settings on the GPS receiver Changing settings even inadvertently may degrade or disable your precision farming system The screen is provided for those rare occasions when an operator may need to change satellite frequencies con figure an additional port or adjust a configuration for a unique GPS receiver Perform such changes only at the specific instruction of Case IH service personnel Press the RDI icon on the navigation bar to display the GPS Receiver screen NOTE The screen is only selectable when the display is connected to an AFS 162 252 262 or 372 receiver or an equivalent Trimble receiver The icon is dimmed when a GPS receiver is not present or is from another manufacturer A OE ace RCIL11DSP408BBG 1
77. 9BA 3 8 TELEMATICS APPLICATION Press Yes to enable the Telematics application Press No to leave the Telematics application disabled If Yes is selected the Telematics icon displays in the status and warning icon area The number of bars 0 3 indicates the TEL current strength of the cellular signal The bars are gray to indicate that the cellular network is not currently connected Six additional windows display e Telematics CAN Node e Fuel Tank Size tractors only Fuel Theft Delta e Username e Password e Local Password If Yes is selected and the DCM 300 modem is not detected on the Controller Area Network CAN the Telematics icon flashes in the status and warning icon area The bars are red to indicate that the system is not functional An information pop up displays Please recycle power See ops manual if problem continues Press the Ignore button to continue working without us ing the Telematics application Press the OK button to dismiss the message Cycle power to the system If the problem persists check the connection to the DCM 300 modem Telematics Installed _ _ INo Or La e matics EEEH Telematics Installed Activate RAIL12DSP1430BA 4 Ol Ed A eiat Telematics Installed ps NVicana MI Fuel Tank Size Fuel Theft Delta oga 5
78. AFS Pro 700 Display Framework Precision Farming E Notes Printer 3rd Party Manager Telematics SOFTWARE OPERATING GUIDE Software Version 28 Part number 47424317 Is edition English November 2012 CASE Ili AGRICULTURE Contents 1 GENERAL A e ees ane meee aadiac ree nae porate eee ne ATN E 1 1 Manual S COD Co ata errar eta O pS e rato E Nas 1 3 D PAV ere eE o E T I eee a ieaeaee eas pee SE ee 1 4 DESKON SONWA Cose aaa AA 1 8 2 ICONS AND WINDOWS TOUCH CONTROLS IMTrOGUCUON sicaris aaa aa adri aaa aa 2 1 O A SE 2 2 KOVDAGS is tarecsatalaila aa D a a retira A a a 2 1 o A A O E A 2 11 HOME SCREEN INTOdUCUO Ns iras ae adn eae 2 12 FOME Screen aled ii AAA AA AAA eos 2 14 Status and warming ICON Meadas daran den 2 18 Lenmsnand areas aitor dates 2 22 TOOLBOX SCREENS WEL CEC ONAN norton dd a li ola cantada 2 23 DISDIAY SetU Sr Narra ia 2 23 Operator Setup SCTeeN o oocccoccoco eee eee een eee eea 2 30 Run Layout screen Run screen customization 0 cece eee eee eee 2 3 Vehicle Name WINdOW cc cee eee cee eee eee e eee e eee ee ee ee nnn 2 50 Precision Farming Setup SCree n 0 cece cence eee e nee eenaees 2 55 Software Activation screen 0 cee eee e nent beeen nn enenas 2 60 3 SETUP PRECISION FARMING APPLICATION BUILDING BLOCKS NEVEEO CLUE GUO Musicas daria ach gene oon ias 3 1 Proe Setup ua ad baad wees ean enn 3 1 Additional WINDOWS cesan rides 3
79. AND AREA CALIBRATION PUT UNO CUR COMM ess aorta gente fase ete a taa eae oe Sting a 3 151 Radar and distance calibration 0 0 0 ccc ccc cece cece eee e eee eenenenunueueaes 3 151 Area CAIN ON AIO Mesa O AER ee 3 158 E NOTES APPLICATION PE EOC CU Ores coecees es chests deste tab dora unes a dsd So Bs adie dera a tenon be 3 163 Field Notes SOM ds e toi elos 3 164 Weather Notes SC o ia eds 3 166 Xtra Notes SOON ir a o ti ee anes 3 169 4 OPERATION DATA MANAGEMENT INTOdUCHO Ntra cast dba bi dae a ic 4 1 IMPOR SOM A A OA 4 3 Filter List screen crop type filter 0 ccc cece cee eee eee e en anes 4 6 De ele SrCe a oi Sandee actress a aa 4 8 Map Management Screen 000 cece cece eee ence e ete e eens erore paba 4 26 MEMORY STICK MANAGEMENT INFOdUCION scary AAA e 4 35 Multiple vehicle practiceS ccc ccc eee e eee rraren 4 36 FROLAUNG Memory SUCK DPIACICCS emma area e 4 37 9 DIAGNOSTICS NTOCUCIO Mera o ee doo bee 5 1 Version SON te od caer ae Ain ae wera we Re ee cab nan eb t 5 2 GAN Status SOON sr er ee a ee ee res ree 5 3 PAUL AL CMIV AAA anh a a Gute arte Bede teenth tad ean tact oie Aah Ga fest 5 4 6 PRINTER APPLICATION NTOdUCION pias cada aa talas a ai ee 6 1 PAS Settings Ci e ea e ains 6 2 AL UO T a OREA CG pun A A asap a dea seats a nace anette ave EE 6 4 Connect to a printer 0 0 0 ccc ee eee ene eee rererere rnnr e eee e eet eens 6 5 Alo ORIG
80. ATICS APPLICATION NOTE Press the Telematics icon at any time to view the cellular connection status and the cellular Radio Sig P nal Strength Indicator RSSI in decibels Press the OK N button to dismiss the message F i Cellular Status Connected Cellular RSSI 68 Db RAIL12DSP1453BA 19 8 7 8 TELEMATICS APPLICATION Text Messages Received screen Managers who are using the AFS Connect Executive a gl j Run 2 telematics package can send text messages from the ee AFS Connect web portal to telematics equipped vehicles AG New Text Message A i F 2013 05 04 11 24 17 in the field An incoming text message immediately displays in a pop up window on the AFS Pro 700 display when it is received NOTE Text messages are limited to a maximum of 160 characters RAIL12DSP1505BA 1 The vehicle operator can use the Text Messages Received screen to e View a time stamped list of incoming text messages e Determine which text messages have been answered Diagnostics Remote Valves e Respond to text messages Delete text messages that are no longer needed HE Y On the Home screen press the Data Management We Run icon to access the Data Management screens Work Condition RCIL11DSP108BBG 2 Press the Msgs messages icon in the navigation bar to display the Text Messages Received screen haa 2013 05 04 11 56 42 Call me when you
81. Duration 24 ih Interval fo min Time Zone Central Standard Time DST Difference UTC 6 0 h RAPH12DSP0971BA 8 3 141 3 SETUP Scroll through the list until you find a major city near your location Station Name OK Highlight the entry and click the Select button to confirm Defaut q4 ee your selection Current station Default Aalbora D enmark x Quebec PO Quincy MA Quito Ecuador Raanana Israel Rabat Morocco ERIAN _ Rancho_Palos_Ve Randolph A T Rangeley ME Rangoon Myanmar e a 4 Rawalpindi Pakistan Ranin WY Reading FA Recife Brazil Redding CA Redondo Beach CA Redwood_City CA Regensburg RAPH12DSP0972BA 9 If there is no large city within 48 km 30 miles of your lo a GPS Status cation or if you simply wish to identify your location with crsa GPS Status GPS Latitude greater precision view the GPS Status screen in Diag Su HP XP 8 40 288640 nostics _ GPS HDOP GPS Longitude Tad 1 20 9 88 594613 Take note of the values that are reported by the GPS CPE PDOP Sige Ria Gs Latitude GPS Longitude and GPS Altitude windows 3 230 3a SE th se DGPS SNR GPS Heading dB 12 3 Tak rien con J ru RCIL11DSP505BBG 10 Enter the exact coordinates for your latitude longitude and altitude into the Station Editor window se Position 7 Latitude IN fa 3 fas Sj Longitude Ww 3 fer fo 3 Heig
82. ETUP Operating notes All summary data and GPS data is stored at the task level To make this information more usable e Only one tag may be assigned to a task When a differ ent tag is required during the current work the operator must create a new task Change the task first and then change the tag e Only one operator may be assigned to a task When a different operator takes over the current work the oper ator must create a new task Change the task first and then change the operator e Only one operation may be assigned to a task When a new operation is selected for the same field the oper ator must create a new task Change the task first and then change the operation e Only one vehicle may be assigned to a task Tasks cannot be shared between vehicles e Only one implement may be assigned to a task If a new implement takes over the current operation in the same field the operator must create a new task Change the task first and then change the implement e Only one work condition may be assigned to a task lf a new or a modified work condition is needed the operator must create a new task Change the task first and then change the work condition Press the Task window to access the pop up options window If no tasks are available the only option is New Thereafter the options are Select Edit Name or Press Select to choose a task from the current list Edit name
83. Init 6 40 864734 the GPRS signal GPS HDOP GPS Longitude 230 00 87 621685 GPS PDOP GPS Altitude ATK 0 00 s 2 357 7 ATK Security Expires a pam Status 10 26 2013 Initializing RAIL12DSP1412BA 23 If the GPRS Status window indicates an error or failure EA to initialize check the GPRS Settings window on the alors senno GPS Setup screen Home gt Toolbox gt GPS See 3 92 1 1 Edit for more information F ss rial Number nannnnnannna Activation Code Activate Vehicle RAIL12DSP1350BA 24 3 134 3 SETUP Constellation Map screen NOTE This screen is only active when the installed GPS receiver is capable of receiving National Marine Electronics Association NMEA sentences of the GSV satellites in view type These include Trimble equivalent receivers such as the AFS 162 AFS 252 AFS 262 and AFS 372 receivers Press the GPS2 icon on the navigation bar to display the Constellation Map screen Constellation Map SNR Elevation Azimuth 5 j 241 4 1 20 22 30 Tracked T Visible 7 GPS HDOP 1 20 GPS PDOP 2 29 RAIL12DSP1424BA 1 The screen is divided into an upper table area and a lower map area Both areas provide valuable information on the 8 number of satellites that are currently visible and tracked 14 in use by the GPS receiver i The table area displays information about a maximum of Tracked 7 10 satellites Eac
84. K boundary s starting point 7 A Boundary is complete message displays RCIL11DSP277BBG 19 Press the OK button to acknowledge and clear the mes sage 3 52 3 SETUP An outer boundary can have as many jogs as necessary to describe the shape of a field However the opera tor should never cross the recorded path of the vehicle with its implement or header when recording a bound ary Two or more closed polygons cannot be recorded as one boundary After a boundary is recorded the soft ware checks the integrity of the boundary and simplifies its structure Any crossed paths are deleted The resulting boundary may or may not be acceptable to the operator RCIL11DSP262BBG 20 3 53 Stop button Press the Stop button while recording a boundary to im mediately complete the boundary with a straight line be tween the current position of the vehicle and the boundary starting point The Recording Boundary icon disappears from the sta tus and warning icon area This is useful whenever a straight line is appropriate to complete a boundary In this example boundary recording starts in the upper left hand corner of the field and proceeds clockwise around its circumference On the fourth side of the field the operator presses the Stop button to complete the boundary with a straight line The final section of the boundary is automatically mapped as a Straight line shown in red bet
85. L12DSP1513BA 16 3 85 3 SETUP Forward Offset The forward offset x axis is the distance from the GPS receiver to the GPS reference point of the vehicle Take the measurement on the ground between the center of the appropriate axle and the bottom center of the GPS receiver If the receiver is to the front of the corrected location enter a positive value If the receiver is to rear of the corrected location enter a negative value using the minus symbol NOTE Directions are from the perspective of the operator seated in the operator s seat NOTE Position the vehicle on flat level ground to mea sure forward offset RCIL11DSP304BBG 17 Press the Forward Offset window to access the numeric keypad Use the keypad to enter the value in meters feet Enter a negative value using the minus symbol Press the Enter button on the keypad to save the value Press the Close X button to exit the keypad without changing the value RCIL11DSP018BBG 18 Right Offset The right offset y axis is the distance from the bottom center of the GPS receiver to the center line of the vehi cle If the receiver is to the right of the corrected location enter a positive value If the receiver is to the left of the corrected location enter a negative value using the mi nus symbol NOTE Position the vehicle on flat level ground to mea sure right offset RCIL11DSP307BBG 19
86. ONS AND WINDOWS Precision Farming Setup screen Use the Precision Farming Setup screen To set the start date of the operating season e To set up boundary and obstacle alarm behaviors e To enable or disable automatic completion of recorded boundaries On the Home screen press the Toolbox icon to access the Toolbox screens wiagnostics Remote Valves Y Work Condition Data Management Calibration Electronic EOR Press the PF Precision Farming icon on the navigation EJ bar to access the Precision Farming Setup screen Month ESTA oT Level RCIL11DSP109BBG 2 2 55 2 ICONS AND WINDOWS Season Setup n Precision Farming Setup In many cases an operator may wish to keep data from several years on a single memory stick The date selected Bound Alarm Audio Obst Alarm Audio in the Season Setup window is the date that marks a new season of operations Alarm Look Ahead On this date all tasks from the ending season are cleared from the maps and are no longer selectable on the Sum mary Data and Run screens A new task is created for the current operation and its operational instance is reset to 1 The Operational Instance window is also reset to the first instance for all other operations during the new season Bound Auto Complete on NY NOTE All data from the past seasons remains accessi ble in the Data Management screens and the
87. P XP and RTX technologies The window label reflects the technology that is in use 3 115 3 SETUP Go to the GPS Status screen Home gt Diagnostics gt GPS to reset the convergence process aps GPS a lt q GPS Latitude 40 288640 Press the Reset button to restart the convergence GPS HDOP GPS Longitude process 31 20 88 594613 Sao x PDOP deso Altitude Bae 30 de 22 86 m DGPS SNR GPS Heading dB HP XP Convergence HP XP Convergence RAIL12DSP1413BA 19 Bs dl al GPS Set Conve Snes Status AE GPS Location Connection Type The Convergence Status window is used with HP XP to pafcustom Custom N l set the units used in the DGPS Converging bar graph Logging Interval DGPS Alarm window Second T Press the Convergence Status window to access the pop up options window Enable Wi Abel alert Status Converge Distance vend Disp Oper Layout RCIL11DSP409BBG 20 Press Percent to have the DGPS Converging bar T J PS St graph window report convergence progress from 0 to crsy GPS Status GPS Latitude 100 tm DGPS 6 40 288640 GPS HDOP GPS Longitude 181 20 88 594613 GPS PDOP GPS Altitude 32 30 de 32 86 m DGPS SNR 4 GPS Heading dB 212 3 HP XP Convergence HP XP Convergence Reset VBS Expires On 06 30 2013 RAIL12DSP1413BA 21 3 116 3 SETUP Press Value to have the DGPS Converging bar graph wind
88. Pes y Pez y Boz vi Mcos y Pcs O X cz vi Maco Vi pes vi YA cas Iono Map Fi v cos vj Y cz v 7 G26 Iono Information Vi cos vi Mois vi PA oz World View Location N32 7828 W 92 4055 Om Satellite System s GPS Glonass Galileo Compass QZ55 Local Time 8 30 2012 4 00 AM 8 31 2012 4 00 AM UTC 5 Cutoff 10 Time Zone GMT 06 00 Central Time US amp Canada RAIL12DSP1039FA 2 Click the Satellite Library button 1 on the left hand side of the screen to select the satellites you wish to track Click the check boxes to select satellites individually 2 or by satellite type 3 NOTE A green check mark icon beside a satellite name indicates that the satellite is in good working condition A red X icon beside a satellite name indicates that the satellite is unhealthy The tool excludes unhealthy satellites by default 3 149 3 SETUP Copynght 2012 Trimble Navigation Ltd Satellite Library 0 Elevation E i L 8 7 70 6 Number of Satellites y Pa a 24 AYA LM VAN ff J ee IRNOS 10 ss i j i IN i AN i j Fi Y 6 00 AM G 12 00 PM 6 00 PM ae lono Information 8 30 2012 10 00 00 AM Location WN 32 7828 W 92 4055 Om Satellite System s GPS Glonass Galileo Compass QZ55 Local Time 8 30 2012 4 00 AM 8 31 2012 4 00 AM UTC 5 Cutoff 10 Time Zone GMT 06 00 Central Time US amp Canada RAIL12DSP1040FA 3 Click each of t
89. Press Edit Name to change the name of a task da Press New to add a task to the current list Press the desired option If Select is pressed a pop up options window of current Profile Setup tasks displays NOTE The options window may contain entries in italics These entries are not selectable because they were cre ated by a different vehicle by a different application or by a different sensor during crop calibration 12 11 06 11 13 17 Press the required task 12 11 04 13 02 43 The screen updates with the selected task 12 dla RCIL11DSP210BBG 23 3 SETUP If New is pressed the software immediately generates a new task name in this format yy mm dd hh mm ss The operator may accept this name for the task OR The operator may press the Task window again fol lowed by Edit Name to change the name Task 12 11 07 06 03 45 RCIL11DSP212BBG 24 If Edit Name is pressed the alphanumeric keypad dis plays Use the keypad to edit the name Press the Enter button on the keypad to save the name RCIL11DSP213BBG 25 3 11 Crop Type The crop type is linked to the task and thereby to the field the farm and the grower The crop type cannot be changed once data has been recorded for the selected task Press the Crop Type window to select a crop from the filtered list in the pop up window NOTE The content of the crop list is
90. Remote Valves Work Condition RCIL11DSP108BBG 1 Press the Map icon in the navigation bar to display the Map Management screen Field Map Item FD765 Boundary Y RAIL12DSP0983BA 2 4 26 4 OPERATION Select a field Press the Field window to access the Field Selection pop up window Map Item Boundary Boundary 1 P gt Derete AAA TO ec tia ee Map RAIL12DSP0983BA 3 Select the desired grower farm and field Press the OK button to return to the Map Management screen Filter Delete RAIL12DSP0984BA 4 Select a map item The Map Item window determines which type of map items are visible on the screen Only one type can be selected at a time Press the Map Item window to access the pop up op tions window Field Map Item Boundary Boundary Y dy Delete Back import Filter A Map RAIL12DSP0983BA 5 4 27 4 OPERATION Select the desired type of map item The multipurpose window in the lower left hand corner of the screen updates to reflect the selected item type ES AAA import Filter Delcte RAIL12DSPO999BA 6 There are two ways to select a specific map item e Press the left or right arrow button to scroll through the E Map Management available map items o The selected map item highlights in blue Field Map Item oros My Boundary M Boundary Boundary2 P gt Derete RAIL12DSP0986BA
91. SP254BBG 46 The operator can change the legend ranges but not the colors used Set the ranges to keep the shading propor tional to the current rate harvesting rate application rate fuel usage rate etc A unique legend is available for each data type yield moisture fuel economy etc The legends remain in effect across farms and fields until an operator changes them For harvest applications the legends are unique to each crop type For the As Applied application the legends are unique to each product seed liquid granular etc The legends are part of the crop setup information that can be imported from another vehicle via its memory stick See 4 3 for information 3 37 3 SETUP Press any range on the legend to access the numeric key pad Use the numeric keypad to enter a new value Press the Enter button on the keypad to save the value Press the Close X button to exit the keypad without changing the value If desired continue editing range values until the legend is complete Press the OK button to close the legend 3 38 119 bu ac 104 bu ac 89 bu ac 74 bu ac 15 bu ac Farm POK Plank Road FD321 JA Ic Run2 Rund RCIL11DSP253BBG 47 RCIL11DSP255BBG 48 3 SETUP Swath map The swath map is a single layer map that shows swath alignment overlap and skip and can be used to align the vehicle to the next swath Map size
92. This feature is not available on the generic vehicle type NOTE The Vehicle Name window can be placed on any Run screen for operator convenience Any information the grower wants to share with a vehicle is exchanged by inserting the memory stick from one vehicle into the display on the other vehicle 4 OPERATION Automatic sharing Some information is shared automatically and does not need to be imported The grower farm field structure can be shared simply by inserting the memory stick into the display when it is un powered and then powering the display ON For exam ple Vehicle A has the current grower farm field structure for your agri business on its memory stick Vehicle B is new and does not If the memory stick from Vehicle A is inserted into the display in Vehicle B the display rec ognizes new information it does not have and loads the information into display memory NOTE Information that is in display memory is saved when the vehicle is turned OFF When the memory stick for Vehicle B is reinserted into the display and the display is powered ON it records the grower farm field structure from memory to its own mem ory stick RCIL11DSP171BBG 2 The data types that are automatically shared between vehicles and or the desktop computer are e Grower e Farm e Field e Operator e Product e Tag e Mark e Container e Boundary e Obstacle e Swath line from the Autoguidance application
93. Toolbox De EE Remote Valves E Work Condition Data Management Calibration Electronic EOR RCIL11DSP108BBG 1 Press the Print icon in the navigation bar to access the Printer Settings Printer Settings screen RCIL11DSP453BBG 2 Use the Printing Mode window on this screen m Printer Settings e To disable all printing by selecting No printer in the pop up options window e To direct the content to a physical printer connected to the display by selecting Printer in the window To direct the content to a text file by selecting File in File Press the Printing Mode window to access the pop up options window Press the desired setting in the window RCIL11DSP454BBG 3 6 PRINTER APPLICATION If File is selected all printed files are stored on the mem ory stick at the level of the cn1 folder the highest direc D ii iia tory level The files are named with a date and time stamp TO E in this manner Screen Name yyyymmdd hhmmss txt Use your desktop or laptop computer with any text editor to read these files Double click the txt file to open it in the default text editing software These txt files cannot be read by the display software nor the desktop software RCPH11DSPOO5ABG 4 6 PRINTER APPLICATION Print to a file To print a screen when File is selected in the Printing rit Trl EJ I Operator Setu Mode window EESE am
94. Valves a On the Home screen press the Toolbox icon to access the Toolbox screens Performance Work Condition Data Management Calibration Electronic EOR RCIL11DSP108BBG 1 Press the Activate icon on the navigation bar to access Software Activation Display Serial Number the Software Activation screen HH nAnAnAAAAANA _ Activation Code Activate Name Status RCIL11DSP013BBG 2 2 60 2 ICONS AND WINDOWS The serial number of the display automatically populates Y TT E Software Activation the top window on the Software Activation screen The Display Serial Number operator cannot edit this window ibi Activation Code Activate Name Status RCIL11DSP013BBG 3 Software Press the Activation Code window to access the pop up COI alphanumeric keypad A Display Serial Number FUT AT Activation Code Activate Status Use the alphanumeric keypad to enter the 32 character code supplied by your dealer If the operator enters more than 32 characters an input er ror message reminds the operator that the activation code must be exactly 32 characters Press the OK button to 3 a 3 clear the message Confirm that the code is complete and 0 1 2 3 4 5 6 T correct as entered 89 A BICDE a lt gt DEL ALL DEL ABC Enter Press the Enter button on the keypad to save the code and close the keypad RCIL11DSP014BBG 5 2
95. Version il longer communicating os SEs RAIL12DSP0998BA CAN bus degraded state reporting its disabled condition The vehicle determines whether the serial number boot code hardware and software versions for the controller are communicated to the display 5 DIAGNOSTICS Fault Archive screen Press the Fault icon in the navigation bar to display the T Fault Archive Fault Archive screen By default the fault archive for the display is shown Display fault codes use a letter prefix to identify the source of the report e AG for the Autoguidance application e PF for the Precision Farming application including GPS receiver related items e NAV for the NAV II navigation controller The vehicle and in some cases the implement deter mines which controllers report faults through this screen The display fault archive is always available on this screen To view the fault archive for other controllers press the Fault Archive window to access the pop up options win dow Press Select List to display a list of available fault archives Erase All The window shows which fault archives are available by controller name If only Display is listed no other con trollers on the vehicle report faults to the display through this screen If additional controllers are listed press a controller to A AM tel 22 2012 view its archive The screen refr
96. a 0 Confirm Import Press the Yes button to import the data Press the No button to cancel the import gt Repeat this process to import additional data types Import the selected records No O EEES RCIL11DSP301BBG 6 4 5 4 OPERATION Filter List screen crop type filter The complete crop list is not required in most farming op erations Use the Filter screen to deselect the crop types that will not be used Deselecting a crop type with this screen removes the crop type across all software on the display reducing the risk of selecting an incorrect crop type The filtered list of selected crops can be modified at any time Select or deselect crop types as your farming oper ations change On the Home screen press the Data Management icon to access the Data Management screens Press the Filter icon in the navigation bar to display the Filter screen The crop list contains all available crop types for the vehi cle Use this screen to limit the crop types that appear in the Crop Type window to those used in your operation This list may be changed at any time without affecting any recorded data NOTE By default all crop types are selected Press the Filter Crop List button to access the Filter Crop List pop up window The crops selected on this list populate the Crop Type window on the Profile Setup screen or the
97. abels 2 35 2 ICONS AND WINDOWS Date Format a Operator Setup Press the Date Format window to access the pop up options window Use this window to select the format in which dates will appear on the display dd denotes the two digit day of the month 01 31 mm denotes the two digit month of the year 01 12 yyyy denotes the four digit year for example 2013 Press your preference to change the setting Press the Close X button to exit without changing the current setting Decimal Symbol Ea l Operator Setup T Press the Decimal Symbol window to access the pop up _l It 1 1 options window Use this window to select the symbol to display when a decimal value is displayed Decimal Symbol XI Press the Close X button to exit without changing the af Press your preference to change the setting current setting Point RCIL11DSP586BBG 21 2 36 2 ICONS AND WINDOWS Run Layout screen Run screen customization Six Run screens are shared by all applications on the display for example harvesting with combine control and autoguidance OR tractor performance with autoguidance Each Run screen is accessible from the navigation bar If the Precision Farming application is installed two Summary Data screens can also be customized with the Run Layout screen Use the Run Layout screen in the Toolbox screens
98. access the Map Layer win dow Press the Zoom window to display the pop up options window RCIL11DSP233BBG 16 Four zoom modes are available e Auto e Field e Manual e Pan RCIL11DSP234BBG 17 3 27 3 SETUP With Auto selected the map zooms to the extent of the Ea current vehicle location within the selected field As the Yield bu ac vehicle moves the map scales dynamically to keep the vehicle and field in the map window As the field size increases the map scale decreases Farm Plank Road With Field selected the entire field displays and the size of the map zooms dynamically to fit the available window As the field size increases the map adjusts to keep the entire field in the window This is the default view If the vehicle is outside the field area the vehicle does not ap pear on the map NOTE If the vehicle is within the field but does not dis play on the map this may indicate that the wrong field is selected as the active field Farm Field Plank Road F0 RCIL11DSP236BBG 19 Q With Manual selected magnifying glass buttons appear in the map window The Q operator uses the buttons to choose the zoom level Press the Minus button to decrease map size zoom out within the window Press the Plus button to increase map size zoom in within the window Each press of a button represents a 50 change in zoom level m l l Farm F
99. all four modes Press your preference to change the setting Press the Close X button to exit without changing the current setting Senn Operator RCIL11DSP582BBG TTT 2 34 Operator 13 Operator Setu Display Volume RCIL11DSP583BBG RCIL11DSP584BBG 14 Operator Setup 2 ICONS AND WINDOWS Display modes GPS Status screen a mode Mixed lcon mode T T HP XP 8 a rs Mas ny GPS HDOP GPS Longitude 2 1 20 88 594613 GPS PDOP GPS Altitude E 2 30 32 86 m DGPS SNR des GPS Heading 212 3 RCIL11DSP503BBG 16 RCIL11DSP504BBG 17 In Icon Icon mode the navigation bar and the windows In Mixed Icon mode the navigation bar displays with display with icons only that is without any text labels icons only no text labels and the windows display with icons and text labels Mixed Text mode Text Text mode Seen om ars8 GPS Status GPS Latitude GPS Status GPS Latitude ven HP XP 8 40 288640 et tT HP XP 8 40 288640 GPS HDOP GPS Longitude GPS HDOP GPS Longitude GPS PDOP GPS Altitude GPS PDOP GPS Altitude DGPS SNR dex GPS Heading sce ie GPS Heading D 12 3 s 12 3 o RCIL11DSP505BBG 18 RCIL11DSP506BBG 19 In Mixed Text mode the navigation bar displays with In Text Text mode the navigation and the windows text labels no icons and the windows display with icons display with text labels no icons and text l
100. any time the operator can update the time and date stamp for the moment of observation by pressing the Time Observed window An information message displays Select Update if you wish to update the Time Observed to the current time Cancel will cancel any update to Time Observed Press the Update button on the message to update the Time Observed value to the current time and date and clear the message Press the Cancel button to leave the current time and date stamp unchanged and clear the message Press the Wind Speed window to access the numeric keypad Use the keypad to enter the current wind speed in decimal increments in km h or mph depending on the unit of mea surement selected The acceptable range is 0 0 160 9 km h 0 0 100 0 mph Press the Enter button on the keypad to save the value NOTE To change this value the operator must access the keypad delete the current value and enter a new one CIT Condition COLITE sunny ee RCIL11DSP432BBG 4 Banna iE 0 Time Observed Select Update if you wish to update the Time Oberved to the current time Cancel will cancel any update to Time Observed Cancel RCIL11DSP433BBG 5 RCIL11DSP435BBG 6 3 167 Press the Wind Direction window to access the pop up options window Press the selection that most closely matches the current wind direction Press the Temperature wind
101. appears from the status and warning icon area 3 153 Radar Cal Drive Course Drive Course Start Radar Measu ama M Radar Cal Radar Cal Value Radar Cal Distance Drive Course Radar Measured 121 8 m Radar Cal Radar Cal Value RCIL11DSP382BBG 6 3 SETUP 5 Press the Cal calibrate button to update the vehi TERTE l SECER cle s radar calibration value COOOL Distance Drive Course 121 9 m Start Radar Measured 121 8 m Radar Cal Cal Radar Cal Value RCIL11DSP384BBG 7 Ifthe difference between the value in the Distance win dow and the value in the Radar Measured window is too great a warning message displays Radar calibra tion result is out of range and will not take effect Please verify distance and repeat calibration Press the OK button to acknowledge and clear the message Restart radar calibration 6 Repeat this procedure at least four times and calculate Radar Cal the average calibration value sum the calibration val ues from each run and divide the total by the number of runs performed 7 Manually enter the average calibration value Press the Radar Cal Value window to access the nu meric keypad Use the keypad to enter the average calibration value Press the Enter button on the keypad to save the value RCIL11DSP386BBG 9 3 154 Distance calibration generic harvester combine cotton picker On
102. ation and is only active when a GPS receiver is present and functioning RCIL11DSP050BBG 37 3 61 3 SETUP Field obstacles Field obstacles can be created with the display when e The Precision Farming application is present Ep 4 ainin e AND e The vehicle is equipped with a GPS receiver NOTE The memory stick must be present when the op erator creates an obstacle on the display NOTE Field boundaries can also be created with the desktop software The Rec Obstacle window placement label Obstacle Record is not part of the default layout and must be added to a Run screen If required create a new name in the Current Layout window on the Run Layout screen and en ee add the Rec Obstacle window to the Run screen of your choice Home gt Toolbox gt Layout One field can contain multiple obstacles as needed All obstacles are saved to the field If a field is deleted on the Delete screen Home gt Data Management gt Delete all of the obstacles for the field are also deleted Delete individual obstacles using the Map screen Home gt Data Management gt Map 3 62 Create an obstacle Three different types of obstacles are available e Open e Closed e Point The software adds a safety margin to the width of the implement or header for whenever the vehicle passes close to an obstacle 1 m 3 ft or 10 of the implement width or header wid
103. ations the recommended factory or field installed location for the GPS receiver with the Magnum Roof standard bracket MX Roof e Custom when the GPS receiver is not installed in the recommended factory or field location or when a custom bracket is used Quadtrac Roof Steiger Roof NOTE Model specific selections are only available when the Display Defaults software is present on the display NOTE When the GPS receiver is used with the Autogu idance application the GPS receiver must be installed on the vehicle center line for best system performance The recommended factory or field installed locations for the vehicle always use the vehicle center line EJ GPS Location Press the appropriate selection for your vehicle GPS Location Grain Tank RCIL11DSP295BBG 5 3 81 3 SETUP Forward Offset Right Offset and Height Offset The screen updates with additional windows When a model specific location is selected in the GPS Location window default values populate the Forward Offset and Right Offset windows The windows are dimmed and not editable These values are accurate for the factory or field installed location of the GPS receiver with the standard mounting bracket A default value based on a vehicle equipped with stan dard tires displays for the Height Offset window This window is editable When the Autoguidance application
104. ba IV Daylight Saving Time RAPH12DSP0975AA 14 Use the Time portion of the screen to select a time period Time for the information to be viewed Start Date 6 26 2012 Start with a 24 h period and adjust the time period later if Start Time 00 00 z required Duration 24 ih T Interval fio min Time Zone UTC 06 00 Central Time US amp Canada DST Difference UTC 5 0 h RAPH12DSP0976AA 15 3 143 3 SETUP To apply your changes click the Apply button 1 Station Editor Click the OK button 2 to return to the main window Station Name A o Racine NG a Position i ie el Height om Elevation Cutoff fo RAPH12DSP0977BA 16 Use the graph icons across the top of the screen or the parra Graph menu to view satellite availability information in a Fie Almanac Satelites Graphs Options Help variety of formats Sr MEE eRe OO Use the agenda and legend icons to toggle whether S elte Systems a agenda and legend information appears on the graphs RAPH12DSPO966BA 17 The following page offers printable representative graphs for satellite visibility and elevation a A Na Lala E ce dl Sesh Planning i pana stand alone soibaane tool lo a Supporting acy fonn of analysis of sibility for GPS In general look for a high number of satellites and a low GLONASS 1550 and geostationary satelites number for Dilution Of Precision
105. before deletion can occur The default setting is All for all windows when multiple crop types implements or work conditions are present NOTE Work conditions are always managed by the soft ware that created them When the display is shared with different vehicle types only the work conditions that were created by the active software can be deleted Selecting All only deletes work conditions that were created by the active application To delete all work conditions from display memory and the memory stick 1 Select Work Condition in the Data Type window 2 The Crop Type window or Implement window de faults to All 3 The Work Condition window for the crop type or im plement defaults to All Press the Delete button to delete all work conditions for all crop types or imple ments 4 Press the Yes or No button at the confirmation mes sage RCIL11DSP322BBG 17 4 OPERATION To selectively delete work conditions from display memory and the memory stick 1 2 Select Work Condition in the Data Type window Select an implement or crop type in the Implement window or the Crop Type window Press the Work Condition window to access the pop up options window 4 Select the work conditions to be deleted 5 Press the Enter button to confirm the selection 6 Press the Delete button to dele
106. ble until Vehicle Name both the Data Type and Vehicle Name windows are populated Filter Delete RCIL11DSP297BBG 2 4 OPERATION Press the Data Type window to access the pop up op tions window The options that display are vehicle dependent For ex ample Implement and Sequence are unique to tractors and do not display for combines The display supports 20 current layouts 20 implements 40 work conditions and 30 sequences for the current ve hicle A message displays when importing additional data ex ceeds the maximum number allowed for the data type To import additional data when the maximum number is reached current information in the display must be deleted Deletion of data types is explained later in this chapter Press the desired selection Press the Vehicle Name window to select the pop up options window Press the desired vehicle ID NOTE The current vehicle s name never displays the current vehicle already has its own information Only the names of other vehicles display Press the Import button Data Type rop Setup Work Condition Filter Delete RCIL11DSP299BBG 3 Data Type ares Current Layout Y Import Vehicle Name _Tractor255 Y RCIL11DSP300BBG 4 Vehicle Name Tractor255 Filter Delete Map RCIL11DSP300BBG 5 4 OPERATION A confirmation message displays Import the selected am l Import records a Tam
107. boundary warning occurs e When the vehicle is within 5 m 16 ft of the boundary OR e When the vehicle at its current speed is within the alarm look ahead distance of the boundary as defined in the Alarm Look Ahead window Home gt Toolbox gt PF 3 58 Bound Auto Complete on NY RCIL11DSP473BBG 30 Bound Alarm Audio Obst Alarm Audio On M Alarm Look Ahead RCIL11DSP473BBG 31 3 SETUP If the vehicle is operating in a reverse gear the approaching boundary warning occurs e When the vehicle is within 10 m 32 ft of the boundary OR e When the vehicle at its current speed is within the alarm look ahead distance of the boundary as defined in the Alarm Look Ahead window Home gt Toolbox gt PF RCIL11DSP265BBG 32 3 59 3 SETUP Boundary related windows Boundary Area Placement label Boundary Area The Boundary Area window reports the area of the outer Boundary Area boundary that the vehicle is currently in minus the total area of all interior boundaries contained within the same a OC outer boundary The value is reported in hectares or acres depending on the units of measurement selected The window requires the Precision Farming application and is only active when a GPS receiver is present and functioning NOTE This window is empty If the vehicle is not inside of an outer boundary RCIL11DSP047BBG 33 Tot Bound Area Total B
108. box gt PF determines whether an audible alarm sounds when the vehicle with its implement or header enters the boundary warning zone The audible alarm is automatically enabled and cannot be disabled whenever the Autoguidance application is ac tive in the display The window is dimmed and cannot be selected The audible alarm beeps slowly for 3 s and then more rapidly for 2 s to alert the operator that the ve hicle with its implement or header is approaching a field boundary After this 5 s period a single alarm tone sounds once every 30 s until the warning condition clears The alarm is accompanied by a flashing Approaching Bound ary icon in the status and warning icon area When the Autoguidance application is not active the op erator can turn the audible alarm ON or OFF If the alarm is turned on a single tone sounds once every 30 s until the warning condition clears If the alarm is turned OFF no audible alarm occurs The Approaching Boundary icon displays in the status and warning icon area regardless of whether the audible alarm is turned ON or OFF The icon flashes when the alarm is turned ON and displays without flashing when the alarm is turned OFF NOTE The alarm behavior occurs if any part of the vehi cle with its implement or header enters the alarm zone The alarm zone is different for forward and reverse oper ation If the vehicle is operating in a forward gear the approaching
109. bscription The four subscription choices available from OmniSTAR are e OmniSTAR HP e OmniSTAR XP e OmniSTAR VBS e OmniSTAR RTX The DGPS receiver on your vehicle may have different GPS signal capabilities If an OmniSTAR capable re ceiver is being used contact OmniSTAR for signal activa tion Once enabled by OmniSTAR the correction method can be changed at any time by changing your subscrip tion service Contact OmniSTAR to add or change the subscription for your receiver RCIL11DSP327BBG 1 With either an OmniSTAR HP or OmniSTAR XP sub scription the system supports operating with automatic VBS backup or manual backup This manual often refers to HP XP to avoid duplicating operating instructions HP and XP are separate subscrip tions with different costs and accuracies and you choose only one In terms of display operation though they are identical This is further complicated by their regional availability In some parts of the world both HP and XP are available In other parts of the world HP works better and only HP is available In yet other parts of the world XP works better and only XP is available Regardless your precision farming system works equally well with HP and XP and the controller automatically rec ognizes what type of signal it is receiving 3 107 3 SETUP OmniSTAR VBS setup The DGPS Type window should automatically detect the VBS s
110. bstacle XX where XX is a number that increments each time another obstacle is created in the current field If desired type a new name for the obstacle Press the Enter button to save the name Press the Close button to exit without saving 3 SETUP 3 64 Run 4 V Rec Boundary 4 Obstacle Properties bs Rec Point Obstacle 2 Closed Obstacle 0 e Open Obstacle 1 Obstacle Name Obstacle 4 Recording Edge Obstacle Type Obstacle Subtype _ Obstacle Properties Point Obstacle 2 Closed Obstacle 0 Obstacle 1 RCIL11DSPO060BBG 6 i obsede Nans IlObstacle 4 ABC RCIL11DSP061BBG 7 3 SETUP The operator must indicate a horizontal position based on the implement width or header width that should be used to record the obstacle left 1 center 2 or right 3 4 i RCIL11DSP028BBG 8 a a aS a gt o RCIL11DSP027BBG 9 Press the Recording Edge window Tr aa Rec Obstacle Rec Boundary Obstacle Properties i Point Obstacle 2 Closed Obstacle 0 Y a Open Obstacle 1 Obstacle Name Obstacle 4 RCIL11DSPO060BBG 10 3 65 3 SETUP Press Left to select the outermost left edge of the imple Run 4 ment or header as the distance from the GPS receiver Coes eee to record the obstacle Press Center to select the center line of the vehicle in tersecting the GPS receiver as the location to record the Recording Ed
111. bus Vehicle specific calibrations are saved to the vehicle s PIN or serial num ber With these tractors the Vehicle Name window is only available on the Run screens 1 Press the Vehicle Name window to change the name 2 Press Edit Name to access the alphanumeric key pad 3 Use the keypad to enter a new name for the vehicle 4 Press the Enter button on the keypad to save the name 2 52 RCIL11DSP173BBG 5 Current vehicle PUMA165 F LN Z7BHO0000 RCIL11DSP457BBG 6 2 ICONS AND WINDOWS Combine screen large combines On the Home screen press the Toolbox icon to access the Toolbox screens Press the Comb combine icon on the navigation bar to access the Combine Setup screen NOTE Contact your Case IH dealer if this window is blank or if it contains the wrong information 1 50 PM Nov 16 2012 The software creates a default name for the vehicle Press the Vehicle Name window to change the name Press Edit Name to access the alphanumeric keypad 1 50 PM Nov 16 2012 Combine Info Diagnostics Calibrations RCIL11DSP175BBG 7 Combine Setup Combine Type Axial Flow Combine Model Combine Class Serial Number AnAAAAAAN Vehicle Name Option Module CCM3 RCIL11DSP469BBG 8 Combine Ty pe Axial Flow A AA O noo 2 53 RCIL11DSP471BBG 9 2 ICONS AND WINDOWS Use the ke
112. cal container in which the crop tasks and pro duction data are recorded for this season Those crop tasks and their production results have a relatively short life soan when compared to the life span of the field and farm so field task and crop type are independent The window options for a farm are the same as those for Profile Setup a grower Press Select to choose a farm from the user defined list of farms 1 If Select is pressed a pop up options window of cur rent farms fields displays 2 Press the required farm The screen updates with the selected farm Press Edit Name to change the name of a farm Press New to add a farm to the current list of farms 1 If Edit Name or New is pressed the alphanumeric keypad displays 2 Use the keypad to create or edit the farm name 3 Press the Enter button on the keypad to save the name RCIL11DSP193BBG 13 3 5 3 SETUP Operating notes A farm cannot be created or selected until the Grower window is populated An instructional message displays if the action is attempted When the farm is changed the Field window displays the last field that the operator used for the farm A farm can only be created or changed when the vehicle is not working that is no data is being collected A maximum of 150 farms can be created Field Auto Select The options window for a field adds one important s
113. ce Engage RCIL11DSP159BBG 16 2 42 2 ICONS AND WINDOWS The window label appears at the selected location on the UNNE a5 Run Layout Run Layout screen TT Current Layout To place more windows proceed in the same fashion INumberolWindows 1 Press a layout location to access the window list Puna NY 2x4 2 Press the desired window for placement RCIL11DSP161BBG 17 To check the appearance of the Run screen being Egi Run Layout customized at any time 1 Press the Back icon on the navigation bar to return to the Home screen RCIL11DSP161BBG 18 2 Press the Run icon to access the Run screens Toolbox Diagnostics Remote Valves Performance Data Management Calibration Electronic EOR RCIL11DSP108BBG 19 2 43 2 ICONS AND WINDOWS 3 Press the appropriate Run screen on the navigation bar to review the layout results ars GPS Status En HP XP 8 RCIL11DSP163BBG 20 Left hand area Customize the left hand area if applicable in the same fashion as the Run screens Run Screen NOTE Some vehicles determine the total content of the Engine Power y left hand area and do not allow any customization a To customize the left hand area EP 1 Select Left Area in the Run Screen window 2 Select your preferred layout number of rows in the Z pinas Rate Number of Windows window 8
114. ceiver to record the boundary The operator must indicate whether the new boundary is an outer boundary or an inner boundary Press the Boundary Type window to access the pop up options window 3 49 RCIL11DSP052BBG Recording Edge RCIL11DSP052BBG 8 Run 4 Rec Obstacle Rec Boundary ron 700 Boundary 3 10 3 SETUP Press Outer to record a boundary for the outside edge Pf ff Y Run 4 f a field Rec Obstacl Rec Bound er CoCr ee er Press Inner to record a boundary within a field Boundary Type RCIL11DSP055BBG 11 If Inner was pressed the Boundary Subtype and Im passable windows display Press the Boundary Subtype window to select a sub type Runi Runz RCIL11DSP052BBG 12 A list of boundary subtypes displays Select the desired subtype RCIL11DSP056BBG 13 3 50 Press the Impassable window Boundary 3 Waterway i i No gt rel al ral RCIL11DSP052BBG 14 Press No if the inner boundary can be driven over Rec Boundary Press Yes if the inner boundary cannot be driven over O Press the Start button to begin recording Press the Cancel button to close the Boundary Proper ties window without recording Boundary 3 t I RCIL11DSP052BBG 16 3 51 If Start was pressed a Recording Boundary Rec Obstacle Recording FF icon displays
115. circle A satellite with an azimuth angle of 207 is currently located 207 from north in a clockwise direc tion relative to the vehicle RCIL11DSP008ABG 4 The elevation angle of a satellite also called altitude is determined by first finding the compass bearing on the horizon relative to true north and then measuring the an gle between that point and the satellite relative to the vehi cle Elevation angles for objects above the horizon range ZION RAS from 207 on the horizon up to 90 at the zenith SWZ RCIL11DSPOO9ABG 5 The more useful satellites 1 will always be the satellites Constellation Map closest to vehicle at the center point of the map They Cae a a ee ee are the satellites that are at higher elevations relative to 2 3 65 12 the vehicle The higher elevation means that the satel aoo Ta lites will remain useful for a longer period of time because se las oo their signal is less likely to degrade from atmospheric con l Tracked 9 ditions and ground clutter y Visible 11 l GPSHDOP 1 20 The screen also reports the average Horizontal Dilution i y TORE 1 90 Of Precision HDOP and Position Dilution Of Precision PDOP for all tracked satellites 2 RAIL12DSP1425BA 6 When OmniSTAR RTX correction is in use Global Or Constellation Map biting Navigation Satellite System GLONASS satellites a aa a ee also appear on the Constellation Map screen a 16 52 68 2
116. cle OR RCIL11DSP361BBG 2 e A problem with the base station itself If the delay reaches 5 s the GPS Status window reports a fault condition and the system is not available for use DGPS SNR Placement label DGPS SNR DGPS SNR The DGPS SNR window reports Signal to Noise Ratio SNR at the vehicle s location SNR is a measure of sig SN aa dB nal strength against electrical background noise A higher SNR number provides better accuracy Nominal values for the various technologies used are GPS 6 WAAS EGNOS 3 OmniSTAR HP XP VBS 7 RCIL11DSP362BBG 3 GPS Altitude Placement label GPS Altitude GPS Altitude The GPS Altitude window reports the vehicle s real time position as elevation above sea level The value is re 1 0 05 m ported in meters or feet depending on the units of mea j surement selected RCIL11DSP363BBG 4 3 126 3 SETUP GPS HDOP Placement label GPS HDOP GPS HDOP The GPS HDOP window reports GPS signal quality at the vehicle location Horizontal Dilution Of Precision 1 20 HDOP indicates whether an object in the horizontal plane between the vehicle and the correction message source for example a tree grove ridge line or mountain range is going to be a problem In general any value below 7 offers good working results RCIL11DSP364BBG 5 GPS Heading Placement label GPS Heading GPS Heading 12 3 The GPS H
117. controlled by the Filter List screen in Data Management Home gt Data Management gt Filter See 4 6 for more information Press the required crop to save the setting RCIL11DSP544BBG 26 66 7y Tag A tag acts like an electronic note for the grower or operator to save another variable in crop production and to filter production results for that variable This may be useful for example to identify seed varieties when harvesting The tag is linked to the task and only one tag may be as signed to a task A maximum of 100 tags can be created and a unique ID is assigned to each tag When multiple vehicles are used the tags should be cre ated on one vehicle and then transferred to the other ve hicles via the memory stick This ensures that tags are identified by a uniform set of IDs across all vehicles NOTE Tags can also be created with the desktop soft RCIL11DSP215BBG 27 ware and then imported Operating notes Change the task first and then change the tag to ensure that data is retained for the previous and subsequent tags Whenever the As Applied application is present use the Product window not the Tag window to describe dif ferences in seed varieties and brands Press the Tag window to access the pop up options win dow Crop Type Beans Soybean RCIL11DSP216BBG 28 3 SETUP Press Select to choose a tag from the user defined list RCIL
118. desktop RCIL11DSP473BBG 3 software Press the Season Setup window to access the pop up options window Press the date that should mark the beginning of the next ff El Precision Farming Setup operating season EHEHEH Season Setup Boundary Alarm Audio The Boundary Alarm Audio window J determines whether an audible alarm sounds when the vehicle with its implement or header enters the boundary warning zone mm G n ae MN GA See 3 46 for detailed information about field boundaries and boundary alarm behavior Press the Boundary Alarm Audio window to access the pop up options window Press Off to disable any audible alarm when approach ing a field boundary RCIL11DSP476BBG 5 Press Or to enable the audible alarm Press the Close x button to exit the window without changing the setting 2 56 2 ICONS AND WINDOWS NOTE When the Autoguidance application is in use the Ciel i ia Ez Precision Farming Setup Boundary Alarm Audio window is set to On and cannot Ill Season Setup Jano01 2012 MI be changed Bound Alarm Audio Obst Alarm Audio On Yon M Alarm Look Ahead 5 Seconds Bound Auto Complete On NY RCIL11DSP474BBG 6 Obstacle Alarm Audio The Obstacle Alarm Audio window determines whether an audible alarm sounds when the vehicle with its implement or header enters the obstacle wa
119. dio at a local base station Ag3000 or DCM 300 modem receives signal from a wireless General Packet Radio Service GPRS connection via a network of municipally or privately owned reference stations The following pages explain the unique setup requirements for each configuration Choose the appropriate procedure for your configuration 3 92 3 SETUP RTK setup AgGPS 450 900 radio a N ma s e e e Eo SN OND RCIL11DSP004GBG 1 Base station components 2 del NOTE The base station must be set up and operating before a successful connection between the vehicle and the base station is possible The base station consists of a GPS receiver with a small display screen 1 a GPS disk antenna 2 an RTK radio 3 and a broadcast antenna 4 for communicating with multiple autoguidance equipped vehicles 5 at the same time The autoguidance equipped vehicle has its own GPS receiver for the GPS signal and a radio receiver to receive the local information from the base station The tripod 6 is an optional portable solution for locating the base station at a consistent location in a field during field work An alternative might be as simple as a steel post driven into the ground at a location where it will be available from season to season without being disturbed A radio repeater 7 is also shown This is a solution for extending the base station output around a large obstruction
120. distance field requires a measured distance etc Press the field to display the pop up options window or Label Label mayest Field Y Fiela y NOTE The window changes color when selected RAIL12DSP1001BA 8 Text windows The pop up options window displays in the center of the screen Lab If no entries were previously entered for the field the only Label Select Thereafter the choices are Select Edit Name and dais Edit Name Use Select to choose an entry from the user created list Use Edit Name to edit the name for the currently se lected entry on the list Use New to add an entry to the current list RCIL11DSP098BBG Press the desired option 2 4 2 ICONS AND WINDOWS If the operator presses Select a pop up options window of existing entries displays NOTE This window also expands to two columns as re quired and supports a scroll bar for large lists Press any entry in the window to select it for the field Press the Close X button to exit the window without changing the field Ifthe operator presses Edit Name or New the alphanu meric keypad displays Use the keypad to create or edit an entry A saronno ABCDEFGH IJKLMNOP QRSTUVWX Yz_ DEL ALL DEL f 123 Enter RCIL11DSP087BBG Numeric windows Screen Label Month day year hour and minute are examples of nu meric windows windows that only accept a number Press the field to
121. e RCIL11DSP516BBG 41 4 24 4 OPERATION Swath Swaths are the recorded straight or curved patterns that are used by the autoguidance system to generate the swath pattern for a field Swaths are linked to the field and therefore to the farm in which they are created Swaths can be deleted at any time without the loss of data Deleting swaths requires e Selection of Swath in the Data Type window e Selection of All or a specific farm in the Farm window e Selection of All or a specific field in the Field window e Selection of All or a specific swath with the Swath window NOTE Individual swaths can also be deleted using the Map Management screen explained later in this chapter 4 25 D lt outer area IX headland N IX headland S Delete Data Type Delete Xy Enter None All Delete Map 42 RCIL11DSP354BBG 4 OPERATION Map Management screen Map items include obstacles boundaries and swaths Map items are always saved under the field which they are mapping Use the Map Management screen to e Delete a map item e Edit a map item s name e View detailed information about a map item e Edit a map item s subtype obstacles and inner bound aries only e Set clear impassible inner boundaries only On the Home screen press the Data Management icon to access the Data Management screens Diagnostics
122. e Fam operor RCIL11DSP521BBG 4 4 9 4 OPERATION Grower Farms and fields are linked to the grower Deleting a grower prevents access to all farms fields tasks and pro duction data that are linked to the grower Since each grower has a unique ID that s used across operations and vehicles only delete a grower if you are sure that you have no future use for the grower or any of its associated farms fields tasks and data Re creating the same grower at a later time results in a new grower with a different ID requiring more management effort with the desktop software The Delete screen adds additional windows as needed to assist the operator RCIL11DSP311BBG 5 With Grower selected as the data type if more than one grower is present on the memory stick the Grower win dow defaults to the All setting If only one grower is present on the memory stick the grower s name is dis played in the Grower window Press the Delete button to remove all growers from dis play memory and the memory stick A confirmation message displays Delete the selected records Press the Yes button to delete all growers Press the No button to cancel the deletion Delete the selected records To delete growers selectively press the Grower window a 3 to display the pop up options window Data Type Grower M Delete Press the box x next to the grower nam
123. e Status Sereas e es re Be rea ong 3 138 Weather Notes SO ren casos ic A ee ee Saree ees Res Si e ES 3 166 Ara NOLES SCCO A a ds 3 169 Additional WINdOWS naana a a ee ee eee ee eee eens 3 15 Area CANON AION fuse cv ar 6 A BE eld BI A Ok ee he ee ee BRE 3 158 Autonomous raw GPS SOTO oie sessed sete Aid a a wae 3 124 Fed DOUNGSNES eaer neiaa eee a Se Se ah a ON tere Merkle Be aio da dee ae 3 46 FNM VCS he cee AA eee tee ell tee hat Coe edhe ee oe 3 74 FEIT OOS LACIO SS in cecal gs ee the rains yes vc wah a arte es ea BE ls Ca ae a ao ee ed SI ee te 3 62 OOC HON sd ESE GENE GORE EGON Et ENE ene SALLE GG RUE sane 3 1 HFOGUIG ION ic 5 bk otic oe Steg tes Sees ok ts aks ee ee Sct ape AA 3 21 is e A A A A A eee 3 46 FOCI CHOI rar lc dd a e na a ad at he hte ot A N 3 125 INTOdUCHO a a E a e e a a e a ds 3 151 INTOQUCUON rotar e a a Sow at Be conse lee ei 3 163 OmniSTAR subscription service setup 6 0 ee eee ee eee teens 3 107 Planning ONING vissers cdas Fea wath ie Wakes ae bk Te wee Gen daw eek by ae 3 148 PlahhinG SOMWA O cairo A da Gd cee ee me Lace ab 3 139 RTK setup Ag3000 or DCM 300 modeM 2 0 ee eee eee eee eens 3 103 RTK setup AgGPS 450 900 radi0 1 eee ene eee e eee nnnes 3 93 Radar and distance calibration 2s atin e a el tee adios de e ee ht ee aliens Bot GAY x 3 151 Real Time Kinematic RTK Setup 0 0 0c ee ee nee ee eee eee e ee ennnes 3 92 SV ACV O A Soci ecto ce tsa ate octet Gey
124. e correct date since all saved information is date stamped RCIL11DSP110BBG 3 Use the numeric keypad input the current month Press the Enter button on the keypad to save the change Press the Close X button to exit the keypad without changing the current setting Use the same process to change the Day and Year windows as required 1 Press the window to display the numeric keypad 2 Use the keypad to input a number 3 Press the Enter button on the keypad to save the change RCIL11DSP112BBG 5 2 24 2 ICONS AND WINDOWS Hour Minute and Day Night Press the Hour window to access the numeric keypad The display must be set to the correct time since all saved information is time stamped Use the keypad to input the current hour Press the Enter button on the keypad to save the change Press the Close X button to exit the keypad without changing the current setting Repeat this process to adjust the Minute window Press the Day Night window to access the pop up op tions window Press AM or PM to change the setting Press the Close X button to exit the window without changing the current setting E l English Backlight Current Vehicle 1 100 Layout RCIL11DSP114BBG 7 2 25 2 ICONS AND WINDOWS Language A lang
125. e for the selected field The valid range is defined by the application that is using the keypad Press the OK button to acknowledge and clear the mes sage Limit the number to the specified range 2 10 Operator Setup Input Error Duplicate name exists Enter another name RCIL11DSP094BBG 6 Operator Setup Input Error Value out of range Valid range is n nto nnn n RCIL11DSP095BBG 7 2 ICONS AND WINDOWS Buttons A buttons is a three dimensional icon that when pressed performs the action that is described by the text or graphic label on the button tt Common text buttons include OK Yes No None Enter Start and Stop Common icon buttons include Close Xx Select X and arrows up down V iet lt 4 right gt Buttons although present on a screen are not available when they are dimmed A dimmed button indicates that something else is required to perform the action The soft ware operating guide for the selected field explains the steps required to complete the action that is associated with the button When all of the prerequisites are met the button is active and performs the action that its text or graphic label de scribes Work Condition The 5 Delete Data Type Delete Implement Work Condition RCIL11DSPO96BBG 1 la Ji ata Type Work Condition Y Delete Implement Planter y Wo
126. e grower 3 Use the Farm window to filter the obstacles to all or one farm NOTE Only farms that have obstacles saved to their fields display If only one farm is present on the memory stick with obstacles saved to its fields only one farm Is available for selection 4 Use the Field window to filter the data to all or se lected fields 5 Press the Enter button to confirm the selection 6 Press the Delete button to delete the selected obsta cles 7 Press the Yes or No button at the confirmation mes sage NOTE Use the Map Management screen explained later in this chapter to delete individual obstacles pt tT a Type dill Obstacle Delete Grower Farm Field All RCIL11DSP341BBG 30 Filter import Back RCIL11DSP343BBG 32 4 21 4 OPERATION AG amp NAV faults Autoguidance and NAV II navigation controller faults can be deleted only with the Delete screen Faults with an AG prefix are autoguidance faults faults with a NAV prefix are NAV II controller faults Faults can be deleted only when they are no longer active Selection of of All in the AG amp NAV Faults window only deletes inactive faults Deleting faults requires e Selection of AG amp NAV Faults in the Data Type win dow e Selection of All in the AG amp NAV Faults window Current layout The display stores up to 20 uniqu
127. e layouts for the Run screens for each vehicle type Deleting a layout removes the named layout from display memory and the memory stick for the current vehicle type NOTE Only the layouts for the current vehicle display when this data type is selected Deleting layouts requires e Selection of Current Layout in the Data Type window e Selection of All or specific layouts with the Current Layout window Field mark setup Up to twenty field mark conditions can be saved on the display or the memory stick at one time Deleting a field mark setup removes the named condition from display memory and the memory stick Deleting field marks requires e Selection of Field Mark Setup in the Data Type win dow e Selection of All or specific field mark conditions with the Field Mark Setup window 4 22 Delete AG amp NAV Faults ACW RCIL11DSP356BBG 33 l Delete Current Layout Y Delete Current Layout X John X Paul Enter Al _Enter RCIL11DSP344BBG 34 Delete RCIL11DSP571BBG 35 4 OPERATION Implement Delete Since each implement has a unique ID only delete an implement if you are sure that you have no future use for the implement Re creating the same implement at a later time results in a new implement with a different ID requiring more management effort with the desktop software NOTE Sequences and work conditions can be reco
128. e pop up options window displays in the center of the screen Press any option in the window to select it for the field Press the Close x button to exit the window without changing the current setting Depending on the field selected the options list may be quite extensive Pop up windows automatically expand to two columns as required When the options exceed the space viewable on a single screen a scroll bar appears on the right side of the pop up options window Press the down arrow in the scroll bar to page down through the options Press the up arrow in the scroll bar to page up through the options Press an arrow multiple times to page through an extensive list of options in the direction selected Option y RCIL11DSP085BBG 6 2 3 2 ICONS AND WINDOWS The location box in the scroll bar indicates the location of the current page in the scrolling list this page is located midway through the list x The size of the location box decreases as the number of j A scrollable pages increases in the scrolling list RCIL11DSP085BBG Information input windows A field without a down arrow indicates e A field that requires the operator to input text or select among text entries that were previously created by the operator OR e A field that requires the operator to input a number The label and context indicate what type of input or selec tion is required A name field requires a name a
129. e rows and or columns The Run Layout screen shows the overall area used by E such windows by repeating the window label in italics eee RCIL11DSP155BBG 13 2 41 2 ICONS AND WINDOWS Any window can appear only once on any Run screen The same window can also appear on different Run screens but never more than once on the same Run screen When you place a window for the second time on any Run screen the window is placed at the new location and removed from its previous location NOTE Some applications will not display the same win dow in the left hand area and on a Run screen at the same time If a window appears in the left hand area it gets priority since it displays on every screen If the same window is also present on a Run screen a blank area appears in its place See the appropriate software oper ating guide for further information RCIL11DSP157BBG 14 Press any window on the Run Layout screen to access the pop up options window NOTE These examples are representative They show the operation of the Run Layout screen and do not doc ument the available windows from a specific farming ap plication RCIL11DSP153BBG 15 Press the desired window for this location on the layout El lesa Nana Use the up and down arrows in the scroll bar to page up and page down through the options window GPS HDOP GPS GPS Heading Guidance Guidan
130. e selected before data can be recorded The implement is raised 2 21 RCIL11DSP265BBG 5 RCIL11DSP376BBG 6 A latching Field Mark button is actively marking its selected condition The vehicle with its implement or header is approaching a field boundary or the end of the swath The vehicle with its implement or header is approaching a field obstacle Recording to the memory stick is in progress Recording to the display memory is in progress Data is not being recorded to the memory stick The implement is lowered 2 ICONS AND WINDOWS Left hand area The left hand area is created by the vehicle Refer to the vehicle operator s manual and accompanying software operating guides for more information about this area The left hand area is always displayed regardless of whether the Home screen is selected In some vehicles the left hand area is not configurable by the operator the vehicle determines the content If the area is configurable a window placed in the left hand area has priority over the same window placed on a Run screen When the operator selects the Run screen that contains a window that is also used in the left hand area the window on the Run screen is blank a E S Toolbox Diagnostles Remote Valves Work Condition Fuel Hour e E fe L h ia i i Data Management Calibration Electronic EOR Engine Load sia BE Slip cas GE
131. e to select or de select it depending on its current state An X indicates that the box is selected Press the None button to deselect all growers Press the All button to select all growers When you are satisfied with the selection press the En ter button to save the setting Back Import Filter RCIL11DSP523BBG 7 4 OPERATION If more than one but less than all growers are selected the Grower window updates with the number of selected items If only one grower is selected the grower s name displays Press the Delete button to delete the selection Import Filter A confirmation message displays Delete the selected records Press the Yes button to delete all growers Press the No button to cancel the deletion Delete the selected records RCIL11DSP315BBG 9 4 OPERATION Farm ie Delete TT p Select Farm to delete all information related to the se _____ Delete lected farm or farms This includes fields tasks obsta cles boundaries calibrations autoguidance swaths and GPS records for any operation planting spraying har vesting etc associated with the farm Since each farm has a unique ID and is used across op erations and vehicles only delete a farm if you are sure that you have no future use for the farm or any of its as sociated fields and data Re creating the same farm at a later time results in
132. e to separate the data Operation that is collected for the first operation from any repeated 12 11 07 06 03 45 Plant N operations Operational Instance Beans Soybean _ For example e When heavy rains flood areas of a field and a crop type must be replanted increment the value in the Op erational Instance window to Plant 2 for the second planting The coverage data from the first planting does RCIL11DSP483BBG 11 not effect the second planting in section or overlap con trol and the total applied acreage does not conflict with the total field acres e It may be necessary to apply herbicide multiple times to control invasive weeds The same product is ap plied to the same crop type in the same field on two or more separate occasions Use a different operational instance for each application of herbicide In this way the coverage data from the first application does not af fect the second application in section or overlap control and the total applied acreage does not conflict with the total field acres Unique data coverage as applied or performance is stored for each instance of the operation When a new instance is created or selected with the window data col lection begins for the new instance and a new task is cre ated A new operational instance can only be created or se lected when the vehicle is not working that is no data is being collected Press the Ope
133. e wait Do the vehicle been moved since the system was turned off not move vehicle until complete or convergence time will be NOTE The operator must answer this question correctly increased Has the vehicle been Failure to do so may prevent the system from converging at all RCIL11DSP345BBG 14 3 113 Vehicle moved If the vehicle was moved press the Yes button to clear O HP XP Position the message Convergence will occur without position Sn Recall recall An information message displays HP XP convergence HP XP convergence has been has been restarted A full convergence time can be ex restarted A full convergence pected You may move the vehicle in the meantime g time can be expected You may i Press the OK button to acknowledge and clear the mes move the vehicle in the sage meantime RCIL11DSP347BBG 15 Vehicle not moved If the vehicle was NOT moved press No to clear the mes HP XP Position sage Convergence will occur with the time saving of po Recall sition recall An icon flashes in the status and warning icon area to remind the operator that the vehicle must not be moved In progress please wait Do not move vehicle until complete or convergence time will be increased Has the vehicle been NOTE If the question is answered incorrectly reset the moved since turned off convergence process with the DGPS Converging win No dow on the GPS Status
134. eading window reports the vehicle heading 4 in degrees within a possible 360 of direction of travel A e 0 equals north e 90 equals east e 180 equals south e 270 equals west RCIL11DSP365BBG 6 GPS Latitude Placement label GPS Latitude __ GPS Latitude The GPS Latitude window reports the vehicle s real time e position in angular distance north or south of the earth s Ly 40 288640 equator measured though 90 RCIL11DSP366BBG 7 GPS Longitude Placement label GPS Longitude a __ GPS Longitude The GPS Longitude window reports the vehicle s real EN time position in angular distance expressed in degrees on a 88 59 461 3 O a circle of reference from the zero meridian Le RCIL11DSP367BBG 8 3 127 3 SETUP GPS PDOP Placement label GPS PDOP GPS PDOP The GPS PDOP window reports GPS signal quality at the vehicle location Position Dilution Of Precision PDOP offers the best overview since it reflects the geometry of the satellites above the vehicle A low PDOP means that the positioning of satellites is good and that good positional accuracy can be expected In general any value below 3 offers good working results RCIL11DSP368BBG 9 GPS Status Placement label GPS Status GPS Status The GPS Status window reports The state of the GPS receiver e The number of satellites in view e The DGPS technology in use if
135. ed NOTE The label of the DGPS Converging window indi cates the technology that is currently in use HP XP or RTX Use the Reset button to restart the convergence process when required Resetting convergence is required when the GPS Receive Position Recall Failed message ap pears or if the operator answers the Has the vehicle been moved question incorrectly Reset is also required if the bar graph stops at a low per centage Convergence is stopped if there is no progress on the bar graph for 10 20 min The Reset button is only present when HP XP or RTX is used This is the only control window on the GPS Status screen 3 131 Version HP XP Convergence sn 0 0 50 100 RCIL11DSP205BBG 13 RTX Convergence 0 100 RAIL12DSP1408BA 14 eps GPS Status GPS Latitude ty DGPS 6 40 283640 GPS HDOP GPS Longitude GPS PDOP GPS Altitude ma DGPS SNR GPS Heading de HP XP Convergence 0 0 RCIL11DSP359BBG 15 3 SETUP VBS Expire Date HP XP Expire Date and RTX Expire Date subscription status and messages The VBS Expire Date HP XP Expire Date and RTX Expire Date windows report the expiration date for the current subscription The information is available regard less of whether the signal is currently in use or not The expiration dates come directly from the GPS receiver They only display if the receiver i
136. een the left hand area has priority When the Run screen is viewed the Map 1 x 4 window only appears in the left hand area Layer RCIL11DSP230BBG 3 3 22 3 SETUP When the Map 1 x 4 window is in the left hand area and a larger map window is on a Run screen the Run screen Run 5 has priority When the Run screen with the larger map E Field is viewed the map only appears on the Run screen NOTE Even though map windows can be placed on mul tiple Run screens there is only one map Changing the data displayed on one Run screen changes all maps on different Run screens to the same settings Changing the zoom setting works the same way Coverage map 2 x 4 example Farm Plank Road RCIL11DSP231BBG 5 3 23 3 SETUP Since the layout of the Run screens may also be cus tomized map size is dynamic the map fills the area that is allocated to it Any Run screen may be laid out in 2 columns by 4 rows 2 columns by 5 rows or 2 columns by 6 rows The Map 1 x 4 window on a Run screen with a 2 x 4 layout is larger than the Map 1 x 4 window on a Run screen with a 2 x 6 layout The Map 2 x 5 window on a Run screen with a 2 x 5 layout fills the entire screen but the Map 2 x 5 window on a Run screen with a 2 x 6 layout does not Farm Plank Road Map Layer The farming and vehicle a
137. een eee eee nee 3 90 ASI OS OCD SGre Jou ee eer rd heh a ees Wee 3 79 AULONOMOUS raw GPO SClUD citan iia das edad ted Mine dike did 3 124 OmniSTAR subscription service Setup 0 0 ccc eee eee eee eee e eens 3 107 RTK setup Ag3000 or DCM 300 modeM 0 2 e eee n eee n ee ennaes 3 103 RTK setup AgGPS 450 900 radiO nannaa anaana eee eee een eee n eens 3 93 Real Time Kinematic RTK Setup 0 0 2 0 0 eee e eee ene e een nnes 3 92 PRECISION FARMING APPLICATION MAPS AND MAP TOOLS ceeeceeceuueues 3 21 MOGLIE Ha o isthe Nene oe A are ee At Paks NA pe A Gh ic he ea OEM A Pog eve AM et AMS Aaa es 3 21 MY AUG Oy aci net ne dee areraere ne a Oa ad aa 3 39 NV OMIC TNA DS iach oa Seis A eee ols be A a E E E E ged ik Ota tion ot 3 21 PRECISION FARMING APPLICATION RADAR DISTANCE AND AREA CALIBRATION 3 151 Ara Ca MD FAUON seo ss Berea oo ee ay ete See nd a ds lek Oe er he EES YBa ad ed AGES 3 158 INTOQUCION o Se cashes cee cael pt 5 Ac Bech Sn cee seed Bence e e e o e ia tt Be Sp Ge lates a bes de NEE de Goatees 3 151 Radarana distance calibration a a a Sule Ms Renate a oa Ao o da e 3 151 PRINTER APPLICATION copia dE DO ES O 6 1 PTAter oeuInas Sere al a E ie 6 2 CONNEC IOA per aislada dadas e da o da ita di dd ind 6 5 Tarso o A A A A te ath dae elec ean ie ert 6 1 PINO ra NING th ees con dace aris aoe Ate eat a eS alo Hon Boel anes mtg F e Are ake hte nl hc ho a bd 6 4 TAA LO AAA E A aac kA dhe a
138. eflect signals The position must offer clear communication between the broadcast radio antenna and the receiver on the vehicle throughout the field In general use line of sight as a guide If you cannot see the radio receiver on the vehicle when it is at the lowest point of a field or behind a rise from the GPS antenna height position the broadcast may be lost at those locations Finally test a location before you commit to it Base sta tion components are portable and lend themselves to ex perimentation 3 94 3 SETUP RTK base station setup The base station has an Autobase function which allows it to determine the GPS coordinates for the receiver s current position Once it determines its GPS location it stores that information in the base station Each time the base station is moved to a new location Autobase is used to save the GPS coordinates for that position When the base station is returned to a previously saved position it searches its library for stored locations and loads the correct coordinate file Autobase is no longer required for known locations At each new location the operator must provide the base station with the correct GPS antenna height before Auto base can be used Measure antenna height h from the ground to the base of the GPS antenna Enter the value with the keypad on the base station Refer to the base station operator s manual for additional information RCPH11DSP018BAG 3
139. elec tion that is not present for the Grower or Farm windows Auto Select With Auto Select based on the current lo cation of the vehicle in a field the software searches all boundaries for all growers and farms on the memory stick ie Select sid to locate the current field NOTE For the Auto Select function to work the vehicle must be equipped with an active GPS receiver and an outer boundary must exist for the field A message displays Search is in progress Please wait Press the Cancel button if required to clear the mes sage and return to other display operations Cancel Sum2 RCIL11DSP197BBG 15 3 SETUP When the field is located another message displays Field was found Field name is now active The Grower Farm and Field windows automatically populate with the correct information for the field Press the OK button to clear the message and proceed to task selection or creation RCIL11DSP199BBG 16 If the vehicle is located between fields outer boundaries when the search starts a pop up options window lists the fields in proximity to the vehicle Press the desired field in the options window RCIL11DSP200BBG 17 If the field cannot be located a message displays A field was not found at the current GPS position Please manually select a field This may occur if a boundary do
140. elect Edit Name and New ris Field Mark 1 X Ap RCIL11DSP285BBG 7 3 76 3 SETUP Press Select to choose the desired field mark from the pop up window of field marks already created by the op erator NOTE The name of the field mark also saves the button type When a field mark is selected for reuse both the name and the button type are recalled Press Edit Name to access the alphanumeric keypad and edit the name of an existing field mark Use the keypad to edit or correct the name Press the Enter button on the keypad to save the name Press New to access the alphanumeric keypad and cre ate a new field mark A maximum of 20 field marks can be created Once cre ated the field marks are available for any ofthe Field Mark 1 4 windows Use the keypad to enter the name Press the Enter button on the keypad to save the new field mark _ LOS LE A Field Mark 1 Field Mark 1 Field Mark Setup a ABCDEFGH IJKLMNO DEL ALL DEL RCIL11DSP289BBG 3 77 9 10 3 SETUP The Button Type window only displays after a field mark Ca Field Mark Setup aaa LAMA Press the Button Type window to access the pop up op tions window Press Latch for a latching push button Press Push for a momentary push button Field Mark 4 Es lf venice S PES RCIL11DSP290BBG Repeat this process until all required field marks have
141. elect a layout If Select is pressed a pop up window of current layouts displays Press your desired layout Press the Close X button to exit without changing the current setting RCIL11DSP144BBG 7 2 39 2 ICONS AND WINDOWS Create or edit a layout If Edit Name or New is pressed the alphanumeric key pad displays Use the keypad to create or edit the name Press the Enter button on the keypad to save the name NOTE How the Run screen layouts are organized de pends on how the display is used When the display is widely used across different vehicle types the selection list consists of layouts created on that vehicle type When multiple operators share the display for a single vehicle type each operator may prefer their own layout Use the provided worksheets at the end of this section to plan the layout of the Run screens The selected or new layout screen can be edited no windows are dimmed Select a Run screen Press the Run Screen window to select one of the six Run screen layouts for customization The pop up window of Run screens displays Press the desired Run screen The layout for the selected Run screen displays NOTE The options window in this example is for a vehicle with a customizable left hand area Some vehicles do not permit this and Left Area does not display in the options window for those vehicle
142. em for which repairs must be delayed until a replacement sensor is available Fault detection for the specific item is re enabled at the next power cycle or by operator activation on the Fault Archive screen in diagnostics Home gt Diagnostics gt Fault The message window does not redisplay Refer to the Fault Archive screen in Diagnostics for more information on the active fault code Home gt Diagnostics gt Fault 2 20 2 ICONS AND WINDOWS Most status icons communicate simpler messages e An object is present or missing e A function is enabled or disabled OR e A tool is raised or lowered The table below lists some of the more common icons you may encounter in the Framework or Precision Farming application Some status icons are unique to the vehicle or the various farming applications Refer to the vehicle operator s man ual or the software operating guide for information about other unique status icons NOTE Many status and warning icons are interactive Press the icon to display additional information The GPS receiver has acquired a valid GPS signal but not a valid Differential GPS DGPS signal if applicable Field boundary recording is in progress Field obstacle recording is in progress The display detects the presence of the memory stick The memory stick must be inserted before powering the display for it to be detected An active grower farm field and task must b
143. ent for vehicles that perform multiple operations or apply multiple products RCIL11DSP192BBG 6 5 Press the Operational Instance window if present to select the desired instance for the selected operation Select the appropriate operational instance from the pop up options window NOTE This window is only present for vehicles that perform multiple operations or apply multiple products Plant 4 RCIL11DSP507BBG 7 The Area window updates with the recorded area for the selected field operation and instance This is the value that was recorded by the farming software and saved to the memory stick Error lo Ll a j 7 r te TLE eT RCIL11DSP508BBG 8 3 160 6 Press the Actual window to access the numeric key pad Use the keypad to enter the known area for the field in hectares or acres Press the Enter button on the keypad to save the value The Error window displays the percentage of error be tween the known field area and the recorded field area If the recorded area is greater than the known area a positive value is displayed If the recorded area is less than the known area a negative value is displayed 7 Press the Calibrate button to begin area calibration 3 161 Back Radar Area Calibration RCIL11DSP509BBG 9 Operational Instance RCIL11DSP510BBG 10 Foes o Operation Operational Instance Pla
144. es not exist for the field or if the field is not on the memory stick Press the OK button to clear the message Select a field manually RCIL11DSP202BBG 18 3 SETUP The other selections in the options window for a field are lu identical to those for a grower or farm Press Select to choose a field from the user defined list of fields 1 If Select is pressed a pop up options window of cur rent fields displays 2 Press the required field The screen updates with the F Select selected farm r nam y RCIL11DSP195BBG 19 Press Edit Name to change the name of a field Press New to add a field to the current list of fields 1 If Edit Name or New is pressed the alphanumeric keypad displays 2 Use the keypad to create or edit the field name 3 Press the Enter button on the keypad to save the name RCIL11DSP204BBG 20 Operating notes A field cannot be created or selected until the Farm win dow is populated An instructional message displays if the action is attempted A field can only be created or changed when the vehicle is not working that is no data is being collected A maximum of 350 fields can be created 3 8 Task E Tag A task is the performance of work with an implementor 1 l 1 1 ABFarms header on a specific crop type in one field of one farm for one grower For example keib Plank Road
145. eshes to display the archive for that controller Fault Select List Display e eee e RCIL11DSP158BBG 3 5 DIAGNOSTICS Each fault occurrence is date and time stamped with the most recent faults listed first Multiple occurrences of the same fault are considered one unique code with an occurrence count that is greater than one Faults are stored to provide a record of past fault events which may help troubleshoot a current prob lem NOTE If all faults cannot be viewed on a single screen a scroll bar is added to the screen to view the fault archive as needed The color of the fault text on the Fault Archive screen indicates the status of the fault e red for faults that are active e green for past faults that are inactive e gray dimmed for faults that are set to be ignored Pressing the OK button on the pop up message leaves fault detection for the problem enabled The pop up mes sage redisplays until the problem is resolved Enabled fault codes are color coded red Pressing the Ignore button on the pop up message dis ables fault detection for the problem The fault condi tion remains but no further messages display until power to the display is cycled OFF and then ON again or until the status is manually changed Ignored or disabled fault codes are color coded gray If a fault condition is corrected self resolved or corrected by the operator the fault code becomes inactive and is c
146. etting for your receiver To check the subscriptions detected for the receiver press the DGPS Type window to display the pop up options window Press the Close X button to exit the window without changing settings The only other correction available with a VBS subscrip tion is WAAS EGNOS Autonomous is also available but it is not DGPS NOTE To add RTK operation to your existing DGPS sys tem contact your Case IH dealer To switch your sub scription from VBS to HP or XP contact OmniSTAR NOTE This completes precision farming setup for a VBS enabled receiver T GPS Location 3 108 GPS Setup i Connection Type Custom ss WI CAN A N Logging Interval DGPS Alarm DGPS Type Forward Offset VBS 0 000 m Right Offset 0 000 m Height Offset RCIL11DSP329BBG 2 GPS Location Connection Type Custom CAN A VBS WAAS EGNOS RCIL11DSP331BBG 3 OmniSTAR HP XP setup El GPS Setup GPS Location Connection Type The DGPS Type window should automatically detect the Ig Custom N can a Y HP XP setting for your receiver Logging Interval DGPS Alarm i DGPS Type Forward Offset HP XP 0 000 m DGPS Backus Right Offset VBS f 0 000 m Position Recall Height Offset Disable 8302 m Convergence Status Converge Distance y Value Wi Layout RCIL11DSP494BBG 4 To check the subscriptions detected for the receiver press en GPS Setup the DGPS Type
147. eypad Use the keypad to enter a new converge distance Ac ceptable values are 0 1 1 m 4 39 in Press the Enter button on the keypad to save the value TT Saree GPS Location 3 112 A GPS Setup PS Connection Type Custom ___ CAN A Y Logging Interval DGPS Alarm 1Second___ Y Nm Y DGPS Type Forward Offset HP XP V o 000 m DGPS Backup Right Offset VBS Y o 000 m S AU Position Recall Height Offset Disable WF 3 302 m Convergence Sv Converge Distance foom RCIL11DSP494BBG 10 GPS Setup Connection Type RCIL11DSP405BBG 11 Position Recall i GPS Setup GPS Location Connection Type Position recall is used with the HP XP technology to re ustom CAI 5 duce the convergence time associated with these tech Logging Interval DGPS Alarm nologies Position recall can be used independently or Second M iNo Vp with VBS backup Position Recall NOTE This feature is also available when RTX correction is in use To enable this feature press the Position Recall window The pop up options window displays Convergence Statue oe Press Enable to enable position recall RCIL11DSP406BBG 12 When position recall is enabled the system automatically hi GPS Setup saves the current GPS location of the vehicle specif GPS Location _ Connection Type ically the receiver before the ignition switch is turned E ee Custom _Wican A Y OFF When the ig
148. for the vehicle in which the display is installed appear as active lf the display is installed in a tractor only tractor appropriate applications display on the Version screen When the display is moved to a combine only combine appropriate applications display on the Version screen In the example shown e Framework and BSP belong to the display e Large Tractors is the vehicle software 3 tt e VT Precision Farming Trip Computer and Auto guidance are farming applications Bs i Software Version Framework Large Tractors Precision Farming Vn n n n Software Version Software Version nnnnnnnan Trip Computer nanannnn Autoguidance RCIL11DSP150BBG 9 DIAGNOSTICS CAN Status screen Press the CAN icon in the navigation bar to display the E a INCESTO CAN Status screen This screen reports the status and Controller GPS source address for every controller on the Controller Area LEO De sella Network CAN bus including the vehicle controllers im ee a This example shows the GPS receiver and the NAV II eRe navigation controller used for autoguidance bs apace arian acs ious The current status for any controller can be one of five sical is 3 states Siig a a e Source Address 170 ___Status__ _Meanlng__ Eck poco Wasson man Hardware Version pr offline The controller was detected but is no Y Software
149. ge obstacle Center Press Right to select the outermost right edge of the implement or header as the distance from the GPS re ceiver to record the obstacle The operator must indicate whether the new obstacle is an open obstacle a closed obstacle or a point obstacle Obstacle Foner Press the Obstacle Type window to access the pop up ER ee options window oe o Obstacle 4 Cancel RCIL11DSPO60BBG 12 Press the desired obstacle type Rec Boundary u cle e RCIL11DSP062BBG 13 3 66 3 SETUP Press the Obstacle Subtype window to select a subtype RCIL11DSPO60BBG 14 A list of obstacle subtypes displays Select the desired subtype RCIL11DSP063BBG 15 Press the Start button to begin recording Press the Cancel button to close the obstacle properties without recording Obstacle 4 ri j RCIL11DSPO60BBG 16 3 67 If Start was pressed a Recording Obstacle J 14 Recording ns Boundary icon displays in the status and warning ia icon area as a reminder that recording is o A in progress The Rec Obstacle window updates with the Pause button the Stop button the Cancel button and the Recording message The Recording Obstacle icon in the status and warning icon area disappears when the obstacle is automatically completed or when the operator presses the Stop button or the Cancel
150. growers that have GPS data saved to the fields of their farms display If only one grower is present on the memory stick only one grower is available for se lection 3 The Farm and GPS Data windows default to All when All is selected in the Grower window 4 Press the Delete button to delete all GPS data on the memory stick 5 Press the Yes or No button at the confirmation mes sage To selectively delete GPS data from display memory and the memory stick 1 Select GPS data in the Data Type window 2 Use the Grower window to filter the GPS data to all or one grower 3 Use the Farm window to filter the GPS data to all or one farm NOTE Only farms that have GPS data saved to their fields display If only one farm is present on the mem ory stick with GPS data saved to its fields only one farm is available for selection 4 Use the GPS Data window to filter the data to all or selected fields 5 Press the Enter button to confirm the selection 6 Press the Delete button to delete the selected GPS data 7 Press the Yes or No button at the confirmation mes sage Farm GPS Data All re omer oer EST RCIL11DSP332BBG 24 Delete TTT Data Type GPS Data A Filter Import Back RCIL11DSP334BBG 26 4 19 4 OPERATION Boundary Boundaries are always recorded for a specific
151. h satellite is identified by its number The IN eS Visible 7 number is black when the satellite is tracked in use and 5 GPSHDOP 1 20 red when the satellite is only visible not in use GPS PDOP 2 29 NOTE A satellite can be visible but not tracked because its signal is too poor RAIL12DSP1424BA 2 For each tracked satellite the table provides its Signal ap Constellation Map to Noise Ratio SNR elevation and azimuth For each e visible satellite the table provides only its elevation and azimuth the SNR value is grayed out The map area below the chart visually represents the lo cations of the satellites in relation to the vehicle and true north All visible and tracked satellites are shown and po SN GPSHDOP 1 20 identified by their number in the same black and red color NT GPSPDOP 1 90 code NOTE The vehicle location is always at the very center of the map RAIL12DSP1425BA 3 3 135 3 SETUP Azimuth and elevation are angles used here to define the position of a satellite in the sky relative to the vehicle The azimuth angle is the compass bearing on the horizon relative to true north of a point directly beneath a satellite Compass bearings are measured clockwise in degrees from north Azimuth angles range from 0 north through 90 east 180 south 270 west and back to 360 north again In the illustration shown the vehicle is located at the cen ter green
152. have a chance The Text Messages Received screen displays a list of in 2013 05 04 11 24 17 coming text messages The text messages appear in re Will you finish on schedule today verse chronological order the newest message appears at the top of the list and the oldest message appears at the bottom of the list NOTE A maximum of 20 text messages can be stored on the display If a message is received after this limit is reached the oldest message is automatically deleted to make space for the incoming message RAIL12DSP1502BA 3 8 TELEMATICS APPLICATION An icon displays next to each text message to indicate Oe whether the operator has responded to the message i q nm 11 56 42 Call me when you have a chance 4 The check mark indicates that the operator 2013 05 04 11 24 17 V has responded to the message A ES Q The magnifying glass indicates that the operator has not responded to the message RAIL12DSP1502BA 4 Press a button on the Text Messages Received screen to access the pop up text message window 3 05 04 11 24 17 Will you finish on schedule today RAIL12DSP1502BA 5 Press the Delete button to delete the text message The message will no longer appear on the Text Messages Received screen 2013 05 04 11 56 42 Call me when you have a Press the View button to view the text message with buttons for the responses that were selected by the web portal user V
153. he name RCIL11DSP187BBG 9 Operating notes Profile Setup A grower can only be created or changed when the vehicle is not working that is no data is being collected When a new grower is created the Farm and Field windows are blank since no farms or fields have been created When the grower is changed the Farm and Field win dows display the last farm and the last field that the oper ator used for that grower Only the farms and fields asso ciated with the grower are available for selection If None is selected for the Grower window the Farm and Field windows are blank The windows cannot be populated until a grower is created or selected An in RCIL11DSP179BBG 10 structional message displays if the action is attempted 3 4 Farm and Field To the display and the desktop software a farm is a large geographical entity that is composed of smaller entities called fields All crop production tasks occur within a field that is defined by GPS coordinates As such all crop production tasks are linked to a field and the field is linked to a farm A field contains one crop type this season Next season the same field may contain a different crop type In areas where two crops per growing season are typical the same field may contain two different crop types in the same sea son The display and the desktop software treat the field as a See a geographi
154. he remaining buttons on the left hand side of the screen 1 to view information about the selected satellites in relation to your location Click and drag the slider on each screen 2 to view information for a specific time of day The effect of the slider depends on the kind of information that is being viewed e For information that is presented in the form of a graph the horizontal x axis always represents time The slider draws a vertical line 3 on the graph at the position of the selected time of day e For information that is presented on a map the slider moves the information on the map to correspond to the selected time of day 3 150 3 SETUP PRECISION FARMING APPLICATION RADAR DISTANCE AND AREA CALIBRATION Introduction This chapter explains e The radar and distance calibration procedures for generic vehicles e The area calibration procedure for adjusting acreage discrepancies for all vehicle types Radar and distance calibration The values from radar or distance calibration are used for calculating speed area and application rates Radar and or distance calibration are required for the highest working accuracy The calibration synchronizes vehicle equipment to the display Perform distance or radar calibration e At the beginning of each season e When working in markedly different soil conditions e When vehicle setup implement or header setup or tires change The closer that the working conditions
155. he vehicle to the next swath Work maps Work maps vary with the farming application e Coverage maps show the work path of the vehicle or im plement through the field during the current operation This is the default setting when the display is powered The coverage map is common to all farming applica tions e Application maps show the as applied rate for the product e g seed fertilizer etc as the vehicle and implement if applicable move through the field Prescription maps show the prescribed rate of product application in the field or sections of the field e Yield maps show harvest results ton ha bushels acre and moisture M as the vehicle moves through the field e Performance maps show an aspect of vehicle produc tivity for example fuel economy as the vehicle with its header or implement moves through the field RCIL11DSP258BBG 1 3 21 3 SETUP Map sizes Four different work map windows Map 1 x 4 Map 2 x 3 Map 2 x 4 and Map 2 x 5 are available for the Run screens The map windows differ in size but not in function The first number of the map label indicates the number of columns used on the Run screens and the second number indicates the number of rows Some applications permit placement of the Map 1 x 4 window in the left hand area When the Map 1 x 4 window is in the left hand area and on a Run scr
156. hese windows are not a part of the Profile Setup screen Home gt Per formance gt Profile The operator can add the windows to any Run screen or view them on screens that are unique to the vehicle Work Condition In many instances vehicle settings must change based on e The work being performed e Weather conditions e Field conditions OR e Crop conditions The Work Condition window describes the settings for the condition For example a vehicle can have different settings for dry product versus wet product or for dry field conditions versus wet field conditions Storing the settings by the different conditions allows an operator to quickly change vehicle setup by selecting the proper work condi tion Refer to the vehicle operator s manual to learn the specific settings that can be saved under a work condi tion A maximum of 40 work conditions can be created Tractors have a special use for the Work Condition win dow saving hitch settings for a mounted implement On tractors the work condition is linked to the implement implement AB Farms Planter RCIL11DSP221BBG 1 Work Condition zl Dry field Fuel Hour L h mm Area ai ha RCIL11DSP381BBG 2 3 SETUP Some combines with the Automatic Crop Settings ACS feature have a special use for the Work Condition win dow saving the work condition for a crop type that re quires specific co
157. ht lo m Elevation Cutoff 10 Time Start Date 6726 201 2 y Start Time 00 00 r RAPH12DSP0973BA 11 3 142 3 SETUP Elevation cutoff stops the GPS receiver from using satel lites that are low on the horizon Reception from low satel lites is subject to more atmospheric error and multipath interference tae Nal fe J fea For autoguidance systems using RTK set this value to 13 nce w fer She fa 3 fo m Elevation Cutoff fo For systems using DGPS set this value to 10 W Time a i Start Date 626 201 2 y Start Time 00 00 RAPH12DSP0973BA 12 Click the Time Zone button to select the time zone for Time your location Start Date 6 26 2012 E Start Time 00 00 Duration 24 4 h Interval ho min Time Zone AA SLAA Tens br j Time Zone DST Difference UTC 5 0 h RAPH12DSP0974AA 13 Highlight your time zone in the list x Time zones Click the OK button to select the time zone UTCOR 00 Baye Calana UTC 07 00 Mountain Time US amp Canada UTC 07 00 Chihuahua La Paz Mazatlan UTC 07 00 Arizona UTC 06 00 Saskatchewan UTC 06 00 Central America UTC 06 00 Central Time US amp Canada UTC 06 00 Guadalajara Mexico City Mont UTC 05 00 Eastern Time US amp Canada UTC 05 00 Bogota Lima Quito UTC 05 00 Indiana E ast UTC 04 30 Caracas UTC 04 00 Atlantic Time Canada UTC 04 00 Cuia
158. ield The usability of the information viewed determines the Plank Road FD321 zoom limits RCIL11DSP025BBG 20 3 28 With Pan selected the Plus and Minus buttons ap pear in the map window and have the same function as they do in manual mode In addition the operator can press a location on the map to pan away from the vehicle to that location The new pan location shifts to the center of the map Press a location on the map to pan the map view to that location The map pans to the new location Farm Plank Road Boundary Field boundaries can be created with the display or with the desktop software A boundary is represented by a line that displays along with the other active map layers e Bold red line outer boundary vehicle is within the boundary e Bold black line outer boundary vehicle is outside of the boundary e Maroon line inner boundary NOTE See 3 46 for information about field boundaries RCIL11DSP237BBG 23 3 29 Press the Layer button to access the Map Layer win dow Press the Bound boundary window to display the pop up options window Press On to display boundary information with the other active map layers Press Off to hide boundary information Press the OK button to save the selection and close the Map Layer window Marks Field Marks 1 2 Field marks for user defined
159. ield marks Use the Field Marks 1 2 and Field Marks 3 4 windows to mark GPS locations in a field during farming opera tions The locations marked are field or crop conditions that require additional attention at some future time This function requires that the vehicle is equipped with a GPS receiver The Field Marks 1 2 and Field Marks 3 4 windows are available for placement on the Run screens whenever the Precision Farming application is present The win dows are not part of the default layout and must be added to a Run screen If required create a new name in the Current Layout window on the Run Layout screen and add the windows to the Run screen of your choice Home gt Toolbox gt Layout The conditions which are marked with the Field Marks 1 2 and Field Marks 3 4 windows are created by the operator during field mark setup Up to four conditions can be active at one time and field marks can be changed at any time No audible or visual warning occurs when the vehicle ap proaches a field mark in subsequent farming operations When the operator presses a Field Mark button the GPS coordinates for the location are both mapped and saved along with the other coverage harvesting as applied or performance data that is being recorded Each Field Mark button can be set up as a momentary push button or a latching button When pressed a momen
160. iew Delete RAIL12DSP1503BA 8 TELEMATICS APPLICATION If the View button is pressed the text message displays with the Ignore button and buttons for up to two response options that were chosen by the web portal user The possible responses are e Yes e No e OK e Later Press the Ignore button to continue without responding to the message Press any other button to send a response to the web portal user NOTE If the operator has already responded to the text message selecting a difference response will update the response on the web portal If the operator responds to a message that was previously ignored the icon next to the message updates to indicate that the operator has responded to the message Text Messages Received 2013 05 04 11 56 42 2013 05 04 11 56 42 Call me when you have a chance Ignore OK Later Gamgam RAIL12DSP1504BA 7 Call me when you have a chance 2013 05 04 11 24 17 Will you finish on schedule today RAIL12DSP1501BA 8 TE NOTES APPLICATION su c8 cs aa a e o tl Fo dd 3 163 PICIG Notes SCEN 4 hc ra a e e a dk ee o bed eae eh beh ek ed a ia 3 164 Weather Notes screen 3 166 AMANOS SOCO era taaa heise a a BE Ae ee 3 169 MOOC ect es aie tates 3 163 HOME SCREEN Sa a a oe e E eo A 2 12 FOme SCRE CTU SC di e acta Ree ide hs leah ee ak 2 14 MOOC ION pass dt Dee ees ts AS che Ge es ae ee Fa Ne ee ced Ree sa cess oe beat i
161. igured the di Activation Code Activate GPRS Settings window auto fills with settings stored on the modem s Subscriber Identity Module SIM card Layout MEA GPS RAIL12DSP1350BA 8 A warning displays Entering an incorrect CPIN value El MIDES may disable your modem Do not change the CPIN value GPRS Settings GPS unless directed by your cellular provider Warning Press the Ok button to continue Entering an incorrect CPIN value l may disable your modem Do not change the CPIN value unless directed by your cellular provider Disp hae Layout Y CAN GPS Ee RAIL12DSP1351BA 9 3 105 The GPRS Settings pop up window displays GPS Setup Press each window to access an alphanumeric keypad Enter the settings issued by your cellular provider Press the OK button to save the settings to the display s APN memory User Name Password CPIN Oo GEMEN RAIL12DSP1352BA 10 This completes setup for RTK receiver operation using the Ag3000 or DCM 300 modem NOTE To add DGPS subscription services OmniSTAR VBS OmniSTAR HP XP or OmniSTAR RTX to your existing RTK system contact your Case IH dealer 3 106 3 SETUP OmniSTARO subscription service setup For systems using DGPS correction the GPS receiver is initially configured to match the OmniSTAR subscription service selected for your system NOTE WAAS in North America EGNOS in Europe and Autonomous require no su
162. in the status and warning 3 AN icon area as a reminder that recording is 22 y T BON in progress The Rec Boundary window updates with the Pause button the Stop button the Cancel button and the Recording message NOTE The Recording Edge window determines whether the fence in the icon appears in the left center or right of the icon The Recording Boundary icon in the status and warning icon area disappears when the boundary is automatically completed or when the operator presses the Stop button or the Cancel button DES E The vehicle can be working while boundary recording takes place Coverage and work results can be recorded at the same time The exact path that the vehicle travels is recorded as the field boundary The boundary can be completed in one of two ways depending on the selection in the Bound Auto Complete window on the Precision Farming Setup screen Home gt Toolbox gt PF e When the Bound Auto Complete window is set to On the software automatically closes the boundary when the vehicle is within one implement width or Boundary is complete header width of the boundary s starting point e When the Bound Auto Complete window is set to Off the operator must press the Stop button in the Rec Boundary window The software draws a straight line from the vehicle s current position to the O
163. indow Press the desired setting 3 90 DGPS Type If an AFS 162 252 262 or 372 receiver or an equivalent Trimble receiver is in use the software automatically detects the type of DGPS correction in use and displays itin the DGPS Type window If another brand of GPS receiver is in use the DGPS Type window does not display These receivers may be used as long as they provide valid GPS input to the sys tem NOTE If the software does not detect the receiver the wrong connection type may be selected The DGPS types that automatically display in the window if enabled on the GPS receiver are e Autonomous e High Performance HP XP Real Time Kinematic RTK e Virtual Base Station VBS e Wide Area Augmentation System European Geosta tionary Navigation Overlay System WAAS EGNOS The setup requirements for the DGPS types are explained in the following sections 3 91 GPS Setup GPS Location Connection Type Custom Y CAN A Y Logging Interval DGPS Alarm 1Second No DGPS Type Forward Offset 0 000 m DGPS Backup Right Offset VBS IY 0 000 m Position Recall Height Offset B Disabie 0 000 m j Convergence Status Converge Distance Value Moiom RCIL11DSP490BBG 2 RCIL11DSP399BBG 3 3 SETUP Real Time Kinematic RTK setup There are two possible sources for RTK signal on a vehicle e AgGPS 450 900 radio receives signal from a data ra
164. ines Axial Flow 88 series combines Axial Flow 30 series combines Axial Flow 21 2300 series combines prior to 2007 model year Generic combines Not Used ooo RS 232B Not Used The settings for the remaining windows on the GPS Setup screen are determined by the Differential GPS DGPS technology that is in use GPS Setup GPS Location O Connection Type Custom Y CAN DGPS Alarm _ Logging Interval Connection Type cane ho RS232B A Cor nverge Distance Convergence Status _ RCIL11DSP400BBG 25 3 89 3 SETUP DGPS Alarm and DGPS Type windows DGPS Alarm em GPS Setur GPS Location Connection Type The DGPS Alarm window controls status igg Custom NI CAN A V icon behavior for DGPS as opposed to raw Logging Interval DGPS Alarm GPS WAAS EGNOS RTK HP XP VBS and RTX are considered DGPS methods for this window DGPS Alarm For vehicles operating in conditions where DGPS correc tion signal is available and generally reliable change this setting to Yes to display the status icon when DGPS sig ae T a E nal is lost Disable MN poom Sid Convergence Status Converge Distance __ For vehicles operating in conditions where DGPS correc tion is absent or frequently lost change this setting to No to suppress the status icon RCIL11DSP402BBG 1 Press the DGPS Alarm window to access the pop up options w
165. ing Interval window is set to 2 s or 3 s a heading change of more than 3 will automatically decrease the interval to improve the displayed map and interval data Press the Logging Interval window to access the pop up options window Press the appropriate interval Press the Close X button to exit the option window with out changing the current selection rT GPS Location Connection Type TETTE Logging Interval Alarm ir second No DGPS Type E Offset HP XP Y DGPS Backup Right Offset ves lo o00 m Position Recall Height Offset Disable P 0 000 m Convergence Status at Distance TT ae GPS Location Connection Type Ipicustom CAN ES Interval DGPS Alarm Interval Disable Woo E Convergence Status eee Distance RCIL11DSP398BBG 24 3 88 3 SETUP Connection Type Pressthe Connection Type window to display the pop up options window Press the setting from the table for your vehicle NOTE The RS 232B DB 9 connector located on the back of the display can be used for GPS input but it re quires an adapter harness to provide ground for the re ceiver Press the Close x button to exit the window without changing the setting Type Generic tractors Magnum series tractors Puma series tractors Steiger series tractors Axial Flow 2x00 series combines Patriot series sprayers Axial Flow 10 20 series comb
166. inues contact dealer selected for the vehicle type Home gt Toolbox gt GPS Check connections Cycle power to the system GPS receiver GPS Receiver Unable to Determine The GPS receiver is unable to provide position lost Position Ensure GPS antenna is not a two dimensional coordinate position obstructed Check that at least 3 satellites are in view and that the receiver does not have an obstructed view of the horizon Working without An active grower farm field and task The system must have a grower farm task selected must be selected before data can be field and task defined in order to log logged Home gt Performance gt Profile data Create or select an active grower farm field and task Data card not Data logging disabled Insert data If the Write to Card window is set to detected card and recycle power to enable data Yes or the GPS Location window is logging set to anything but Not Installed the system checks for the presence of a data card at power ON Insert a memory stick and cycle power to the system The system detected the presence of a memory stick and then detected that the device was removed Data logging will stop The memory stick must be reinserted and power to the system must be cycles to enable logging PF 105 Memory device Archive data on memory device and The memory stick has 90 of its usable 90 full remove unwanted files via Home gt Data memory used Data will need to be Management
167. ion Key Key Description RAIL12DSP1346BA 19 An expiration date displays for each subscription key The El dates shown are provided by the base station and cannot be changed by the operator a ee 04 18 2013 01 02 2015 Active X Invalid Expired OK Expiration Date i Disp Oper Layout Impl Vehicle aps RAIL12DSP1347BA 20 The operator can also provide an optional description for En GPS Setu each RTK subscription key pS RTK Security Press the window at the bottom of the RTK Security win Key 1 of nnnnnnnnnnnnnnnn dow to access the pop up options window 4 RTK Security Xx BOO CA Key Description RAIL12DSP1346BA 21 3 101 3 SETUP Press the Key 1 window to access the alphanumeric i i NENE El Active X Invalid Expired OK key Description Y Use the keypad to enter a description for the key Press the Enter button on the keypad to save the de scription Repeat this process for each key RAIL12DSP1340BA 23 Press the OK button on the RTK Security pop up win GPS Setu dow to save the values y RTK Security Key 1 lt BASESTATION2 Key Keto a A Active X Invalid Expired RAIL12DSP1349BA 24 This completes setup for RTK receiver operation using the AgGPS 450 900 radio NOTE To add DGPS subscription services OmniSTAR VBS OmniSTAR HP XP or OmniSTAR RTX to your existing RTK system c
168. is auto matically completed if the vehicle comes within one imple ment width of the starting point When set to Off the boundary being recorded is only completed if the operator presses the Stop button in the Record Boundary window RCIL11DSP480BBG 11 Recording A x NOTE On is the default setting for the Boundary Auto TTT fd a Complete window If when recording a boundary the Rec Obstacle corner of the field gets cut off try recording the same f 107 boundary with the Boundary Auto Complete window set to Off Drive the entire boundary to the desired end point then press the Stop button in the Record Boundary window RCIL11DSP482BBG 12 2 59 2 ICONS AND WINDOWS Software Activation screen Some applications require the operator to enter an activation code on the display Contact your dealer to get activation codes for your display NOTE Use the Activation Code window on the GPS Setup screen Home gt Toolbox gt GPS to input codes relating to the GPS receiver for example RTX correction The activation code is a 32 character sequence of numbers and letters that is unique to the serial number of your display Have your display serial number with you when contacting your dealer for an activation code The serial number of the display appears on the Software Activation screen Home gt Toolbox gt Activate Toolbox De e Remote
169. is created a new task is automatically created Delete these tasks from the memory stick for the first vehicle before sharing the grower farm field informa tion with other vehicles These tasks cannot be used by the second vehicle They appear in italics on option lists and cannot be selected 7 Repeat steps 3 6 for each additional vehicle 8 After sharing the memory stick with each vehicle power ON the display with the device that is matched to that vehicle not the first vehicle Verify that all of the information has successfully transferred 9 Atthe end of the day archive the information from the memory stick for each vehicle to your desktop com puter 4 36 4 OPERATION Rotating memory stick practices In some operations growers prefer to rotate two or more memory sticks between the vehicle and the desktop com puter In this situation the memory stick should be erased after its information has been archived and then returned to the vehicle without a cn1 folder This causes the display to create a new cn1 folder from display memory guaranteeing that the most recent farm ing data planting spraying harvesting is used Always start a new task when you swap memory sticks in this manner GPS data is only written to the memory stick Rotating memory sticks retains the summary records be tween memory sticks but not the GPS data Start a new task to prevent GPS data from overlapping for the same task between t
170. is present measure the height offset and adjust the value for accuracy The value is used for roll correction to keep the vehicle aligned to the swath NOTE An accurate Height Offset value is critical for good guidance performance The height offset value z axis is the distance from the bottom center of the receiver to the ground This value must be a positive number NOTE Position the vehicle on flat level ground to mea sure height offset 3 82 _ Tractor example Logging Interval DGPS Alarm ee y DGPS Type Forward Offset HP XP P1270 m DGPS Bach sition i Height Offset Disable gt A ConvergenWPotatus Converge Distance RCIL11DSP394BBG 6 Combine example Connection T Type F CAN A i Logging Interval DGPS Alarm Second Mino M Position Re Offset Disable am 3 760 m Convergenc status Distance RCIL11DSP395BBG 7 RCIL11DSP310BBG 8 3 SETUP The GPS receiver may be mounted on top of the AgGPS 450 900 radio module as shown Measure the height off set from the base of the GPS receiver not the radio mod ule RCIL11DSP298BBG 9 Press the Height Offset window to access the numeric Ca GPSS keypad 3 Coot Ez Location Connection Type Use the keypad to enter the value in meters feet Press the Enter button on the keypad to save the value Press the Close X button to exit the keypad without cha
171. l applications support both uppercase and low abiediefigh ercase alphabets toggle using the up arrow button and i k m n O p extended character sets beyond the alphabet a r s t ul viw x y z _ gt al V ptas Enter RCIL11DSP092BBG 2 2 2 ICONS AND WINDOWS Some applications support both alphanumeric keypads f Operator Setup and numeric keypads The selected window determines which keypad is appropriate for the operator to input the required information Use both uppercase and lowercase letters when creating entries to improve readability on the display RCIL11DSP093BBG 3 Applications customize the numeric keypads as well El GPS Setup The decimal point or comma and minus sign are present GPS Location Connection Type on some numeric keypads and absent on others depend ing on whether decimal increments or negative numbers are appropriate for a given window for example GPS receiver offset values RCIL11DSP493BBG 4 2 8 2 ICONS AND WINDOWS Keypad access Whenever a keypad is needed to enter a name or value Operator Setup the keypad is displayed when the operator presses O 3 Q x e New or Edit on a pop up options windows OR e A numeric field a field that only accepts a numeric value The keypad displays in the center of the current screen Press the Delete All plis button to clear the current entry in the keypad EJES AB ly QR Yz Press the
172. l the operator presses the Record button at the next cor ner of the field NOTE The map does not draw the boundary line while recording is paused When the next corner is recorded the map updates to display the straight boundary line recorded during the pause In this fashion a field boundary may be defined as a series of straight line segments joined at the field corners NOTE Use the Stop button to close the boundary after the final corner of the field is passed RCIL11DSP263BBG 26 3 56 Cancel button TA Rec Obstacle Recording Exit boundary recording at any time by pressing the Can 720 i E xx cel button This action deletes the recording in progress from display memory and the memory stick A message displays immediately after the button is pressed Are you sure you want to delete the boundary that is being recorded Press the Yes button to cancel recording and delete the boundary in progress The Recording Boundary icon disappears Press the No button to continue the recording in progress The Recording Boundary icon remains in the status and warning icon area RCIL11DSP058BBG 27 VY Run 4 a Recording G Recording in progress Are you sure you want to delete the boundary that is being RCIL11DSPO59BBG 28 3 57 3 SETUP Boundary warning The Bound Alarm Audio window on the Precision Farming Setup screen Home gt Tool
173. lay Product application is monitored and controlled with the display Rawson Config 5 Soft Switch Road Setup Setup As applied results can be mapped or products can be AZ Run applied with prescription maps yA Y A Rawson A Aug Rt 30 0 ksds ac Two Rawson controllers can be connected to the display for greater flexibility in section control and multiple product application Required software for the display includes Rawson Con troller Com3 Manager ing and vehicle software ok Sai siga A Rawson A Ax As Applied Precision Farm o ri 208 Rawson Cola Soft Switch Setup Road RCIL11DSP414BBG 2 Complete documentation for the Rawson Accu Rate system is available from your dealer 7 THIRD PARTY SYSTEMS Raven variable rate system A Raven variable rate control system SCS Series 100 9 E 440 450 460 660 or SCS Series 1000 4000 4400 4600 ei Aapa 1 Amt App amp A Raven 1 Avg Rt 5000 can apply liquid granular or other products with Tang 22 838 gal ac the AFS Pro 700 display Product application is monitored and controlled with the display As applied results can be mapped or products can be applied with prescription maps Two Raven controllers can be connected to the display for great flexibility in section control and some series support multiple product application Required software for the display includes Raven Con
174. ld or fields This includes tasks boundary obsta cles calibrations autoguidance swaths and GPS records for any operation planting spraying harvesting etc associated with the field Since each field has a unique ID and is used across oper ations and vehicles only delete a field if you are sure that you have no future use for the field or any of its associated data Re creating the same field at a later time results in a new field with a different ID requiring more management effort with the desktop software Delete Field deletion requires an additional window to make the Ea A correct selection To delete all fields on the memory stick RCILMDSP31888G 12 1 Select Farm in the Data Type window 2 Press the Grower window to select All for all grow ers on the memory stick 3 The Farm and Field windows default to All when All is selected in the Grower window Press the Delete button to delete all fields for all farms for all growers on the memory stick 4 Press the Yes or No button at the confirmation mes sage To delete the fields for a specific farm Delete 1 Press the Grower window to display the pop up op tions window and select the grower of the farm which contains the field 2 Press the Farm window to select the farm which con tains the field A pop up options window displays 3 Press a farm in the options windo
175. lection in the Run screen window 2 which indicates that this is the layout for the first Run screen RCIL11DSP140BBG 3 2 x 6 is the default selection in the Number of Windows window 3 which indicates that the Run 1 screen is organized in two columns with six rows Run screen layouts urrent Layo ut Run screen layouts are saved to the vehicle type and are Default not saved with the other operator preferences The oper Run Screen ator creates screen layouts for the vehicle in use Run Run 1 Y screen layouts created for one vehicle type can be shared with other vehicles of the same type but cannot be ac cessed on another vehicle type nor imported into another vehicle type To change the layout of the Run screens the operator must create a new layout A new layout may include an operator s preferences for all six Run screens the left hand area if applicable and the two Summary Data screens if applicable A maximum of 20 layouts may be created Ra iS Press the Current Layout window to access the pop up options window 2 38 2 ICONS AND WINDOWS If no other layouts exist the only option is New Window Label Window Label RCIL11DSP141BBG 5 b 1 Thereafter the options are Select Edit Name or New Window Label Window Label Window Label Window Labal RCIL11DSP142BBG 6 S
176. lt of this selection Press the Delete button to delete all tasks for all operations for all farms and fields 3 Press the Yes or No button at the confirmation mes sage GAE RCIL11DSP326BBG 21 4 OPERATION To selectively delete tasks from display memory and the Pf ff E memory stick EHETE 1 Select Task in the Data Type window 2 Use the Operation window to filter the tasks to all or one operation 3 Use the Farm window to filter the tasks to all or one farm 4 Use the Field window to filter the tasks to all or one field 5 Use the Task window to filter the tasks to all or se lected tasks 6 Press the Enter button to confirm the selection 7 Press the Delete button to delete the selected tasks 8 Press the Yes or No button at the confirmation mes sage Back import Filter RCIL11DSP524BBG 23 4 OPERATION GPS data GPS data consumes the most storage space on the mem ory stick GPS data includes yield data and as applied data GPS data deletion is the recommended method for re covering memory stick space for the current operation planting spraying harvesting when you need to retain the summary data for the tasks To delete all GPS data from display memory and the memory stick 1 Select GPS Data in the Data Type window 2 Select Al in the Grower window NOTE Only
177. m was powered OFF The fuel theft alarm is triggered when the difference or delta between these two measurements exceeds the percent age in the Fuel Theft Delta window NOTE The fuel theft alarm appears on the AFS Connect web portal not on the AFS Pro 700 display RAIL12DSP1484BA The acceptable range of values for the Fuel Theft Delta window is 1 20 The default setting is 5 Press the Fuel Theft Delta window to access the pop up keypad Use the keypad to enter a value from 1 20 Telematics Telematics CAN Node Press the Enter button on the keypad to save the value Yea VWican RAIL12DSP1432BA 11 Username a Telematics Telematics Installed _ Telematics CAN Node 3 NOTE The Username window is only required for grow ers who intend to use the remote file transfer feature of the AFS Connect Executive telematics package Fuel Tank Size Use the Username window to enter the server user name that is used for remote file transfer son de 480 gal sd Press the Username window to access the pop up al phanumeric keypad RAIL12DSP1484BA 12 8 4 8 TELEMATICS APPLICATION Use the keypad to enter the server user name Press the Enter button on the keypad to save the user name Password NOTE The Password window is only required for grow ers who intend to use the remote file transfer feature of the AFS Connect Executive
178. mbine settings On combines with the ACS feature the work condition is linked to the crop type Refer to the combine operator s manual for more information on the ACS feature Press the Work Condition window to access the pop up options window Press Select to choose the desired work condition from the user defined list 3 16 implement risomct Beans Soybean VJ RCIL11DSP223BBG 4 Implement RCIL11DSP224BBG 5 Press Edit Name to change the name of a work condi tion Press New to create a work condition with the alphanu meric keypad Operator Press the Operator window to access the pop up options window See 2 30 for information about creating operators and se lecting personal settings See 4 8 for information about deleting operators NOTE When logging data only one operator can be as signed to a task Change the task first and then change the operator to ensure that data is retained for the previ ous and subsequent operator Press Select to choose your name from the user defined list Press Edit Name to change the name of an operator NOTE Do not use Edit Name to replace one operator name with another name Edit Name does not change the unique ID that is assigned for reporting purposes Press New to add an operator to the current list Work Condition Operator FD321 Task 1
179. mers equipment options The standard accomplishes this goal by standardizing and simplifying control and communication In e Agricultural vehicles e Displays e Implements e Software e Data storage e Cables e Connectors RAIL12DSP1041BA 2 When used as the virtual terminal for an ISO 11783 im plement the display receives its implement control and reporting functions for the implement from the implement itself These functions and windows are the responsibility of the implement manufacturer Read the operator s manual from the implement manu facturer before using the implement Obey all safety mes sages in the manual and on the implement decals when using the implement RAIL12DSP1007BA 3 1 GENERAL Manual scope The Case IH software applications that are available for the AFS Pro 700 display takes full advantage of its layered architecture There is vehicle software farming software for example harvesting planting etc and extended feature software for example Precision Farming Trip Computer etc that can be layered together in your dis play This display manual is the base manual for all software applications A software operating guide is then available for any vehicle specific or farming function application The purpose of this display manual is to explain e The standard tools that are used by all applications on the display e Navigation through the various screens in a
180. minor to moderate system damage e A default value has been manually overridden by an operator using a window on a Run screen RCIL11DSP107BBG 4 OR e An unsafe practice is in progress Caution icons are accompanied by a pop up window ex cept when an operator overrides a default value 2 ICONS AND WINDOWS The window contains e The caution icon e The fault message e An icon for the problem area e A fault code reference e A brief explanation of the condition e An instruction that explains where to find more informa tion A caution message can be acknowledged in two ways Press the OK button to clear the message and leave fault detection enabled for the specific item that caused the fault As long as the fault condition is present the warning icon continues to flash in the status and warning area and an audible alarm sounds every 10 s If the fault condition clears the caution icon clears and the alarm is suppressed but the system continues to monitor the specific item Press the Ignore button to acknowledge the message and disable fault detection for the specific item that caused the fault The caution icon remains in the status and warning area as a reminder that the condition is still present but the icon is dimmed or disabled and no longer flashes The audible alarm is also suppressed NOTICE Do not use Ignore to acknowledge a message unless there is a known sensor probl
181. n area regardless of whether the audible alarm is turned ON or OFF The icon flashes when the alarm is turned ON and displays without flashing when the alarm is turned OFF NOTE The alarm behavior occurs if any part of the vehi cle with its implement or header enters the alarm zone NOTE When the Autoguidance application is active the obstacle warning behavior is canceled when the steer ing wheel is turned or the Guidance Engage button is pressed to disengage automatic steering The alarm zone is different for forward and reverse oper ation If the vehicle is operating in a forward gear the approaching obstacle warning occurs e When the vehicle is within 5 m 16 ft of the obstacle OR e When the vehicle at its current speed is within the alarm look ahead distance of the obstacle as defined in the Alarm Look Ahead window Home gt Toolbox gt PF 3 72 RCIL11DSP270BBG 26 Bound Alarm Audio Alarm Look Ahead RCIL11DSP473BBG 27 Bound Alarm Audio Obst Alarm Audio Alarm Look Ahead RCIL11DSP473BBG 28 3 SETUP If the vehicle is operating in a reverse gear the approaching obstacle warning is given e When the vehicle is within 10 m 32 ft OR e When the vehicle at its current speed is within the alarm look ahead distance of the obstacle as defined in the Alarm Look Ahead window Home gt Toolbox gt PF RCIL11DSP270BBG 29 3 73 3 SETUP F
182. n s window a Interval psem Alarm DGPS pe oa Offset R 0 000 m RTK RTX Source Right Offset 0 000 m Height Offset A GPS RAIL12DSP1305BA 30 There are three OmniSTAR RTX options os GPS Setup 6 A GPS Location Connection Type e RTX Sat Std satellite standard z ci Y CAN e RTX Sat Fast satellite fast Logging Interval DGPS Alarm e RTX Modem Std modem standard ETS CE l The pop up options list only includes the option that is RTK RTX Source Xx ie activated RTX Modem Std Press the desired option in the list NOTE If RTX Sat Std or RTX Sat Fast is selected this completes precision farming setup for RTX correction NOTE RTX correction also uses the Converge Distance and Position Recall windows that are described as a part Ls caveat of HP XP setup RAIL12DSP1382BA 31 Vehicle 3 120 3 SETUP If RTX Modem Std is selected the RTX Setup window TERT E EN DA AEST is added to the screen A GPS Location Connection Type Ll fgi custom peana y Press the Edit button to access the RTX Setup pop up Logging Interval DGPS Alarm window DGPS Type Forward Offset RTK M ocoom RTK RTX Source Right Offset RTX Modem Std 0 000 m RTX Setup Height Offset Edit sition Recall Converge Distance Disable Layout MEA GPS RAIL12DSP1386BA 32 The RTX Setup window displays Connection Type Ente
183. n to delete the selected bound aries 7 Press the Yes or No button at the confirmation mes sage NOTE Use the Map Management screen explained later in this chapter to delete individual boundaries Delete Boundary Grower Farm Field All RCIL11DSP335BBG 27 Delete Data Type Boundary Y Delete RCIL11DSP339BBG 29 4 20 4 OPERATION Obstacle Obstacles are always recorded for a specific field A field can contain multiple obstacles and all obstacles are deleted when the field is selected either individually or within its farm and grower structure To delete all obstacles from display memory and the memory stick 1 Select Obstacle in the Data Type window 2 Select All in the Grower window NOTE Only growers that have obstacles saved to the fields of their farms display If only one grower is present on the memory stick only one grower is available for se lection 3 The Farm and Field windows default to All when All is selected in the Grower window 4 Press the Delete button to delete all obstacles on the memory stick 5 Press the Yes or No button at the confirmation mes sage To delete a specific field s obstacles from display memory and the memory stick 1 Select Obstacle in the Data Type window 2 Use the Grower window to filter the obstacles to all or on
184. nac alm Ele Almanac Satelites Graphs Lists Options Windows Help Sr linea 4 am oF it Sle oo E Satelite Systems V GPS V Glonass Galileo Compass Y WAAS RAPH12DSP0966BA 3 To load the new Almanac file select Almanac gt Load Planning Default 6 26 2012 Ea At the prompt click Yes to clear the old Almanac file RAPH12DSP0967BA 4 Use the file browser to locate the new Almanac file on your hard drive Almanac Files To load the file e Select the file and click the Open button OR e Double click the file Files of type Almanac Files 7a alm RAPH12DSP0968AA 5 3 140 3 SETUP A message displays information about the Almanac file Planning that was imported i almanac alm Imported Imported satelites 31 GPS 24Glonass 4 Galileo 11 Compass Click the OK button to clear the message 0 WAAS Total satellites 31 GPS 24Glonass 4 Galileo 11 Compass 7 WAAS RAPH12DSPO969AA 6 Select File gt Station to identify your location Print Print All Exit RAPH12DSP0970BA 7 The Station Editor window displays Station Editor To identify your location by the nearest large city click the Station Name City button NOTE Select a city that is within 48 km 30 miles of your location If the list does not contain a city within this range use the exact coordinate method explained later Start Date 6 26 2012 Start Time on Ct
185. nd cannot be modified by an operator Press the Soil Type window to access the pop up op tions window NOTE The default setting for all soil and crop residue Field 1 EE ES windows is Unknown RCIL11DSP417BBG 1 Press the selection that best matches the type of the soil in the current field RCIL11DSP418BBG 2 Press the Soil Moisture window to access the pop up options window Press the selection that best matches the moisture of the Soa MOIE soil in the current field Unknown RCIL11DSP420BBG 3 3 164 3 SETUP Press the Soil Condition window to access the pop up ae Field Notes options window Soil Condition Press the selection that best matches the condition of the ssi Condition a Unknown soil in the current field Weather Notes RCIL11DSP422BBG 4 Press the Crop Residue window to access the pop up 1 mA field Notes options window aa _ Press the selection that best matches the amount of crop residue in the current field Unknown Weather Mc RCIL11DSP424BBG 5 3 165 3 SETUP Weather Notes screen Press the Weather icon in the navigation bar to access the Weather Notes screen Soil Moisture Optimal Y RCIL11DSP426BBG 1 Use the six windows on the Weather Notes screen BEJ J Weather Notes e To apply a time and date stamp for when the current weather conditions were entered or selected A
186. ndition is removed Danger icons mean e Safe operation of the vehicle is not possible Stop the vehicle An immediate hazardous situation is present If not avoided the situation will result in death or serious in jury OR A critical component or condition required for proper vehicle operation is not present RCIL11DSP105BBG 2 2 ICONS AND WINDOWS The window contains e The danger icon e The fault message e An icon for the problem area e A fault code reference e A brief explanation of the dangerous condition e An instruction that explains where to find more informa tion A danger message can only be acknowledged and mo mentarily cleared by pressing the OK button The fault must be corrected to stop the message from reoccurring More information is available in the Fault Archive screen in Diagnostics Home gt Diagnostics gt Fault RCIL11DSP106BBG 3 Yellow is the color of caution Caution icons are shown after danger icons in the status area or are shown first when no danger icons are present Caution icons only clear when their cause is removed Caution icons mean e Operation of the vehicle is possible with the loss of one or more functions The operator must decide whether to continue operating with the loss of the function indi cated e A potentially hazardous situation is present If not avoided the situation could result in loss of vehicle control loss of data or
187. nging the value RCIL11DSP396BBG 10 3 83 3 SETUP When Custom is selected in the GPS Location win dow no default values populate the Forward Offset Right Offset or Height Offset windows Use this selection when the GPS receiver is not mounted at the ES Interval DGPS Alarm recommended factory or field installed location or when 1Second YNo sd a custom bracket is in use Forward Offset The forward right and height offset dimensions must be measured and entered in the windows tag Offset o AP Potatus q Distance RCIL11DSP490BBG 11 Offset values which describe the distance between the GPS receiver and the GPS reference point are required to achieve more accurate swath alignment product appli cation and data mapping The distances are described in a three dimensional plane The GPS receiver location is its physical location on the vehicle Measure from the bottom center of the receiver RCIL11DSP302BBG 12 The GPS reference point varies by vehicle e Front steer tractors the ground below the center of the rear axle RAIL12DSP1510BA 13 3 84 3 SETUP e Articulation steer tractors the ground below the center of the front axle RAIL12DSP1511BA 14 e Combines the ground below the center of the front fixed axle RAIL12DSP1512BA 15 e Sprayers and floaters the ground below the center of the rear axle AAAAAAAASSAAAAASEAAABAAAAAAL RAI
188. nition switch is turned ON again the Logging Interval DGPS Alarm saved GPS location is used to restart the converging TSecond MN NW process Using the last known GPS coordinates reduces DGPS Type Forward Offset the signal convergence time HP XP__ Wijooo00 m DGPS Backup Right Offset To take advantage of this feature vess 0 000 m e The system must be turned OFF while the signal is con Position Recall Height Offset verged that is receiving proper GPS input to record If the vehicle is left in the field or an open outdoor area Convergence Status ewe Distance at the end of the work session the current coordinates Value W are saved If the vehicle is moved inside a building the signal is blocked and no coordinates are saved If the vehicle is always powered down inside a building posi RCIL1MDSP407BBG 13 tion recall should not be enabled since it will not reduce convergence time e The vehicle must not be moved not even a short dis tance between the time the ignition switch is turned OFF and the time that initialization is complete Initial ization is not the same as convergence With position recall enabled do NOT move the vehicle until you check system status when the vehicle is turned T ON HP XP Position After the display starts up an information message dis Recall plays In progress please wait Do not move the vehicle until complete or convergence time will be increased Has In progress pleas
189. nk Be mics wh ceca ee 8 cca edie AVE Sep Te ape a eee names 3 39 WORCIMADS Uria e os awa hee awe ew bee Maa bade ee tne eae ee eae eee 3 21 THIRD PARTY SYSTEM Sii idas 7 1 Flex CGOMCONTOLS SM ta EA A a E ai iaa 7 4 HARDICONTOLSYSIEMM aea ideada a a tarada ia add ences 7 3 MOGGIO bara ra a e hg ev 6 Rl a Ros EIS HE A ip BI e Bist BES E dt 7 1 Raven variable Tate MM a lied 7 2 Rawson Accu Rate system soo ia AA A ASA AAA A EIA AA bee Ge we 7 1 TOUCH CONTRO ES A e ea aio e leads es 2 1 o O A A A AN 2 11 INTFOdUCUO Nazca a a a a o EI ia a era Be ne is a es eds des e carita 2 1 A A A A A A A ic cite tel ale igen ree anne ate eae etd 2 7 Dealer s stamp CNH America LLC reserves the right to make improvements in design and changes in specifications at any time without notice and without incurring any obligation to install them on units previously sold Specifications descriptions and illustrative material herein are as accurate as known at time of publication but are subject to change without notice Availability of some models and equipment builds varies according to the country in which the equipment is being used For exact information about any particular product please consult your Case IH dealer CASE Ili AGRICULTURE Copyright 2012 CNH America LLC All Rights Reserved Case IH is a registered trademark of CNH America LLC Racine Wisconsin 53404 U S A
190. nnot be recov ered if it has not been archived Delete information from the memory stick only after that information has been archived on your business computer with the desktop software This practice prevents the ac cidental deletion of information that you require There may be occasions where a Device Full message will tempt you to create free space by deleting stored data so that you can continue your current operation Know what you are deleting and ensure that you have an archived copy of the information before you proceed On the Home screen press the Data Management icon to access the Data Management screens i oCh Toolbox Diagnostics Remote Valves A Y Work Condition Electronic EOR Press the Delete icon in the navigation bar to display the Delete screen NOTE The Delete button and other windows are dimmed and unselectable if the memory stick or display memory does not contain data of the type displayed in the Data Type window Work Condition Press the Data Type window to access the pop up op tions window Back Import Filter RCIL11DSP522BBG 2 4 OPERATION The options that display are vehicle dependent For ex Delete ample Implement and Sequence are unique to tractors a and do not display for combines Press the arrows on the scroll bar to page up or down through the options window Press the data type you wish to delet
191. nt Plant 1 Error 1 9 Calibrate al 326 ha Area Distanck RCIL11DSP510BBG 11 3 SETUP The Area window updates with the value from the Ac o Area Calibration tual window and the Error window is set to 0 0 i The Calibrate button displays Calibrated Operational Instance Planti Y fa26 ha Calibrated Distance RCIL11DSP511BBG 12 3 162 3 SETUP E NOTES APPLICATION Introduction The E Notes application is required by any vehicle that performs spraying but the application is available for any farming operation in which tracking field and weather conditions is important tt 3J tt 3y tt The E Notes application does not require a GPS receiver but the Grower Farm Field Task and Crop win dows must be populated before the E Notes screens become active Any information on field and weather conditions automatically saves to the task on the memory stick Weather infor mation is time and date stamped at the time of observation and can be updated as frequently as required as conditions change To minimize the steps for the operator the selections on all E notes screens apply to all subsequent tasks until they are changed The following actions do NOT reset the windows to their default selections e Changing any component in the active data set grower farm field task crop
192. ny applica tion e Toolbox screens that are used by all applications e Components of the Precision Farming application e Generic calibrations e Common Data Management screens e Common Diagnostics screens By reading this manual an operator will gain the basic knowledge and skills that are required to learn any appli cation that is available for the AFS Pro 700 display 1 GENERAL Display Installation and removal The AFS Pro 700 display can be easily moved from one vehicle to another First disconnect the electrical connector from the display Then Remove the four screws that connect the display to the support Transfer only the display to another vehicle OR e Loosen the knob on the supporting arm and move the display to another vehicle that already has an available supporting arm RAIL12DSP1048BA 2 OR Remove the display with its support from the vehicle mounting Transfer both the display and all mounting hardware another vehicle RAIL12DSP1046BA 3 1 GENERAL Memory stick The AFS Pro 700 display uses a 4 GB Universal Serial Bus USB memory stick part number 84398840 to store and retrieve information during farming operations RAIL12DSP1042AA 4 Insert the memory stick in the slot located on the back of the AFS Pro 700 Push the stick in until it is fully seated The memory stick must be inserted before the display is powered for the system to detect the
193. of any folder or file e Never delete the index vy1 file until the information has been archived This file is required to launch the archive process using the desktop software 4 35 RAIL12DSP1042AA 1 4 OPERATION Multiple vehicle practices If you have more than one vehicle of the same type trac tor combine etc with an AFS pro 700 display label each memory stick with the product identification number PIN or serial number of the vehicle Always match the mem ory stick to the vehicle when it is used 1 Use a single vehicle or the desktop software to create any of these data types e grower e farm e field e tags e Operator e product e field mark e boundary e obstacle RCIL11DSP171BB 1 swath i ae If required transfer the memory stick from the desktop computer to a vehicle 2 Create any Run screen layouts with a single vehicle On tractors create implements and sequences On combines perform crop setup 3 Once setup is complete on the memory stick power OFF the display and remove the device from the vehi cle 4 Install the memory stick from the first vehicle in the next vehicle 5 Power ON the display to automatically share the grower farm field etc from the device with the dis play 6 Use the Import screen Home gt Data Management gt Import to add the other data types crop setup Run screen layouts implements work conditions etc NOTE When a field
194. olor coded green Fault Archive GPS Receiver Comm 7 30 AM Jul 22 2012 Ln E Fault Archive Fault Archive Display N O 7 30 AM Jul 22 2012 GPS Receiver Communication Lost 7 30 AM Jul 22 2012 RCIL11DSP401BBG 6 5 DIAGNOSTICS To change the status of a fault press the individual win m Fault Archive dow for the fault to access the pop up option window i Fault Archive _p Display Press Enable to change the fault detection from ignored Not Detected to enabled Ing Press Ignore to change the fault detection from enabled Fault t Entry to ignored Ea FaultInfo Info NOTE The option in the Fault Entry window changes with the status of the selected fault To view more information about a fault E Fault Archive on f Fault Archive 1 Press the individual window for the fault to access the Display pop up options window sini Heleciod 2 Press Fault Info to display the information window wine grdo lane RCIL11DSP162BBG 8 5 DIAGNOSTICS The information window contains T Fault Archive Fault Archiv e The fault title at e The fault number Bv j Titles Nav It Nat l Detected e The advisory message lgnd GPS e The number of occurrences for the same fault 11D AG 201 e The time and date of the last occurrence e The time and date for when the fault was last cleared Info Please recycle power See ops manual if Press the down arrow on the
195. onnected printer or to a file on the memory stick In both cases the to tal screen is not printed A simple text only page or file records the text content of the printable windows on the selected screen The file output for the GPS Setup screen is shown as an example The screen name 1 is the first item on the page The windows with printable content are then shown separated by double line spaces In each win dow group the window name is the first line 2 and the window setting or value 3 is the second line The ap propriate unit of measurement where applicable is also shown Printing whether to a page or a file is performed on a screen by screen basis Some screens and windows cannot be printed Messages guide the operator e If a screen contains printable content a confirming message displays e f a screen contains no printable content a different in formational message displays NOTE The left hand area is never printable Performance and Diagnostics screens IB Operator Setup 20111101 084054 txt Operator Setu Grid Lines Yes Time Format 24hr o Display Mode Mixed Text Date Format yyyymmdd Decimal Symbol Point C RCPH11DSP023BBG 1 6 PRINTER APPLICATION Printer Settings screen The Printer Settings screen determines where the con tent is delivered On the Home screen press the Toolbox icon to access the Toolbox screens
196. ontact your Case IH dealer 3 102 3 SETUP RTK setup Ag3000 or DCM 300 modem NOTE The Ag3000 or DCM 300 modem must be prop erly installed in the cab of the vehicle per the instructions that accompany the unit The DGPS Type window should automatically detect the RTK setting for the receiver NOTE The GPS receiver must be RTK enabled before this selection will appear on the setup screen See your Case IH dealer to discuss this option if it was not the orig inal correction method selected for your system If the receiver is enabled for more than one type of correc tion press the DGPS Type window to display the pop up options window Select RTK as your DGPS type The screen updates with windows only appropriate to RTK and the RTK RTX Source window is added if a supported receiver is present Cee 3 103 AGPS Location AJ GPS Location GPS Setup Connection Type Custom_____ Y CAN A Y Logging Interval DGPS Alarm No y DGPS Type Forward Offset RTK V o 000 m RTK RTX Source Right Offset CY 0 000_m Height Offset 0 000 m Connection T Type Custam Wicana Y RAIL12DSP1306BA 2 GPS Setup Connection Type Custom_____ YIICAN A W Logging Interval DGPS Alarm 1Second_ MIINo_ Y DGPS Type Forward Offset RTK V o 000 m RTK RTX Source Right Offset Height Offset 0 000 m RAIL12DSP1305BA Press the RTK RTX Source window
197. or Summary Data 2 in the Run Screen window 2 Select your preferred layout number of columns and rows in the Number of Windows window 3 Press a location on the layout screen to display the pop up options list 4 Press a window label for placement 5 Repeat Steps 3 and 4 until the layout is complete NOTE Some windows are only appropriate to the Sum mary Data screens and therefore are not available on the Run screens Other windows are common to both the Run screens and the Summary Data screens 2 46 e z PELER Cm Summary Grower Summary Farm MM RCIL11DSP167BBG 24 Run Screen Number of Windows Summary Data 1 Y INN Summary Tag Moisture Avg Summary Field RCIL11DSP169BBG 25 2 ICONS AND WINDOWS Layout worksheets Use the following worksheets to plan your Run screen layouts for your farming applications 2 x 4 Layout Run Screen RCIL11DSP001FBG 26 2 47 2 ICONS AND WINDOWS 2 x 5 Layout Run Screen RCIL11DSP002FBG 27 2 ICONS AND WINDOWS 2 x 6 Layout Run Screen RCIL11DSP003FBG 28 2 ICONS AND WINDOWS Vehicle Name window Use the Vehicle Name window to create a user friendly name for the vehicle in which the display is currently installed With the AFS Pro 700 display information can be shared e Between farming applications e Between vehicles of the same type tractor to tracto
198. ording in progress The Recording Obstacle icon remains in the status and warning icon area Recording Rec Bou ndary Run 4 HHHH Rec Boundary Recordin in progress Are you sure you want to delete the obstacle that is being RCIL11DSPO66BBG 25 3 71 3 SETUP Obstacle warning The Obst Alarm Audio window on the Precision Farming Setup screen Home gt Toolbox gt PF determines whether an audible alarm sounds when the vehicle with its implement or header enters the obstacle warning zone The audible alarm is automatically enabled and cannot be disabled whenever the Autoguidance application is ac tive in the display The window is dimmed and cannot be selected The audible alarm beeps slowly for 3 s and then more rapidly for 2 s to alert the operator that the ve hicle with its implement or header is approaching a field obstacle After this 5 s period a single alarm tone sounds once every 30 s until the warning condition clears The alarm is accompanied by a flashing Approaching Obsta cle icon in the status and warning icon area When the Autoguidance application is not active the op erator can turn the audible alarm ON or OFF If the alarm is turned ON a single tone sounds once every 30 s until the warning condition clears If the alarm is turned OFF no audible alarm occurs The Approaching Obstacle icon displays in the status and warning ico
199. oundary Area Placement label Tot Bound Area The Tot Bound Area window reports the total area of Tot Bound Area all outer boundaries for the current field minus the total area of all inner boundaries contained in the field The n AC value is reported in hectares or acres depending on the units of measurement selected The window requires the Precision Farming application and is only active when a GPS receiver is present and functioning RCIL11DSP048BBG 34 Area Total Field Placement label Area Total Field The Area Total Field window reports the total area for Area Total Field all tasks for the current operation and instance 0 00 ac RCIL11DSP021BBG 35 Area Remaining Placement label Area Remaining The Area Remaining window reports the difference be Area Remaining tween the areas reported by the Tot Bound Area and Area Total Field windows that is the workable area AC within the outer boundary that has not yet been worked The window requires the Precision Farming application and is only active when a GPS receiver is present and functioning RCIL11DSP049BBG 36 3 60 3 SETUP Time Remaining Placement label Time Remaining The Time Remaining window reports the time remaining Time Remaining based on the current work rate to complete the workable area of the current field The window requires the Preci e sion Farming applic
200. ow Distance Cal Value RCIL11DSP388BBG 13 3 Drive to the end of the course at the intended work Pa Distance Calibration ing speed and press the Stop button The vehicle Drive Course can be moving or stationary when the Stop button is Start pressed a Maniu Dietance NOTE Careful alignment with the stop position is crit 121 5 m ical for the most accurate results FRIE ae Actual Distance When the Stop button is pressed the Measured Dis oom gt tance window stops accumulating distance Distance Cal Value i Update Cal RCIL11DSP389BBG 14 4 Enter the actual length of the course as it was mea sured by tape measure Press the Actual Distance window to access the nu Actual Distance meric keypad x Use the keypad to enter the value in meters or feet depending on the unit of measurement selected 1 3 3 4 Press the Enter button on the keypad to save the E 6 7 8 value 910 DEL Enter RCIL11DSP390BBG 15 3 156 3 SETUP 5 Press the Update Cal button to adjust the stored cal Pe Distance Calibration ibration value for the current field conditions and vehi Drive Course cle configuration e Start The value in the Measured Distance window updates maser Distance to match the value in the Actual Distance window and 121 5 m a new calibration value displays Pe eee Distance Cal Value
201. ow The field and swath pattern rotate AO fee Farm around the vehicle when the vehicle changes heading Plank Roada The compass in the upper left hand corner of the swath map rotates to indicate the current heading of the vehicle RCIL11DSP033BBG 4 The Swath Map window is particularly beneficial for A aligning to the correct swath after the end of row turn or aH Farm Field when working a Spiral or circular pattern especially when working at night Swath Map RCIL11DSP034BBG 3 40 3 SETUP View angles The swath map offers three view angles 20 45 and 90 The angles provide different perspectives of the vehicle relative to the horizon when an observer views the vehicle from behind RCIL11DSP256BBG 6 A 90 view angle red angle means the observer is view Run 6 ing the vehicle from directly above the vehicle O gee PlankRoad Road A 45 view angle blue angle means the observer is view ing the vehicle at a 45 downward angle toward the hori zon RCIL11DSP035BBG 3 41 3 SETUP A 20 view angle green means the observer is viewing Pf fy Es Run 6 the vehicle at a 20 downward angle toward the horizon A e rene Plank Road Road 20 Press the View Angle button on the map window to ac Run 6 cess the pop up options window A e Plank Road Road Press the desired setting to change the map view angle and close the window RCIL11DSP037BBG 10 3 42
202. ow report convergence progress in the unit of length selected during operator setup meters or inches NOTE This completes general operation and precision farming setup for an HP XP enabled receiver 3 117 as 1 a RAIL12DSP1414BA zm GPS Latitude 40 288640 GPS Longitude 88 594613 GPS Altitude de 32 86 m 4 GPS Heading D 12 3 HP XP Convergence Reset VBS Expires On 06 30 2013 22 OmniSTAR RTX setu Ed GPS Setup P HA z GPS Location Connection Type o Vehicles that are equipped with the AFS 372 receiver L 3 Custom N CAN A SY have the additional option of RTX correction service This Logging Interval DGPS Alarm correction solution uses both Global Positioning System 1Second No GPS and Global Orbiting Navigation Satellite System DGPS Type Forward Offset GLONASS satellites increasing satellite availability for HP XP 0 000 m improved uptime DGPS Backup Right Offset NOTE The receiver must be unlocked to the OmniSTAR ves __ Mif 000 m_ level for RTX standard satellite correction and RTX stan posticn BECAN Height Offset dard modem The receiver must be unlocked to the RTK Disable Y 0 000 m level for RTX fast satellite correction Convergence Status Converge Distance _ Value Mioto2m On the GPS Setup screen press the down arrow on the z 2 Layout impi ultra GPS scroll bar to view the second page of the screen RAIL12DSP1377BA 23 NOTE
203. ow to access the numeric keypad Use the keypad to enter the current temperature in de grees Celsius or Fahrenheit depending on the unit of measurement selected The acceptable range is 50 70 C 58 0 158 0 F Use the minus key to enter a neg ative value Press the Enter button on the keypad to save the value NOTE To change this value the operator must access the keypad delete the current value and enter anew one Press the Humidity window to access the numeric key pad Use the keypad to enter the current humidity as a percent age The acceptable range is 0 100 Press the Enter button on the keypad to save the value NOTE To change this value the operator must access the keypad delete the current value and enter anew one RCIL11DSP437BBG 7 RCIL11DSP439BBG 8 esa ES RCIL11DSP441BBG 9 3 168 3 SETUP Xtra Notes screen Press the Notes icon in the navigation bar to access the Xtra Notes screen Sky Condition f Partly Cloudy Y Wind Speed Wind Direction 5 km h Temperature asco CO Note In addition to the Spray Tip window the Xtra Notes screen offers five Note windows for the current task The operator can use the Note windows to describe any other information affecting the current farming opera tion A note applies to the current task and any subsequent tasks until it is deleted To upda
204. ped or products can be applied with prescription maps Two Flexi Coil controllers can be connected to the display a AiFlexiCoil 2 Amt Work for greater flexibility in section control and multiple product application vee A FC Master A FlexiCoil 2 Ib ac o PS Required software for the display includes Flexi Coil Com3 Manager As Applied Precision Farming and vehicle software AFC C2 Set EN e 0 0 Ib ac FlexiCoil Config Setup RCIL11DSP552BBG 2 Complete documentation for the Flexi Coil rate control system is available from your dealer 8 TELEMATICS APPLICATION 8 TELEMATICS APPLICATION Telematics screen When the Telematics application is present for use with the AFS Connect telematics service the Telematics screen is added to the Toolbox screens On the Home screen press the Toolbox icon to access the Toolbox screens piagnostics Remote Valves Performance Run Work Condition Data Management Calibration Electronic EOR Press the Tel icon on the navigation bar to access the E Telematics screen Telematics Installed The Telematics screen displays Telematics Installed Use the Telematics Installed window to enable the Telematics application on the display Press the Telematics Installed window to access the pop up options window Activate RAIL12DSP142
205. pplications that are loaded Layer on the display determine which layers are available for viewing Press the Layer button to access the pop up Map Layer window RCIL11DSP258BBG T7 NOTE The Map Layer window shown includes the win dows for all applications Press the Data Type window to access the pop up op tions window RCIL11DSP271BBG 8 3 24 Data Type Coverage is the default data type that is common to all applications on the display Coverage shows the path of the vehicle with its implement or header through the field when work mode is detected The other available data types depend on both the vehicle and the application that is in use e On some combines the additional options are Mois ture and Yield e On some tractors the additional option is Fuel Econ omy Data xi Obstacles On WI e When the As Applied application is present the op tions may be Granular Liquid Seed Seed Left Seed Right ManApp1 ManApp2 ManApp3 and ManApp4 Press the desired selection The Map Layer window updates with the new setting Press the OK button to close the Map Layer window RCIL11DSP274BBG 11 3 25 3 SETUP A yield map for the selected field represents harvest re sults with different colors Each color indicates a range of yield per area ton ha bu ac
206. presence of the stick NOTE To avoid data corruption never remove the mem ory Stick until the display is powered down completely RCIL11DSP073BBG 5 1 GENERAL Screen care Clean the screen area of the display with a soft nonabra sive cloth and window cleaner NOTICE Do not use solvent cleaners which can damage the screen area Storage case A case may be provided to protect the display e During transport between vehicles OR e For storage During the winter months place the display in the case and store it in a controlled environment RAIL12DSP1044BA 7 1 6 1 GENERAL Power ON and power OFF When the ignition switch is turned ON the display loads its startup page The Light Emitting Diode LED on the front of the display CASE Vy should be green indicating that the display is both pro AGRICULTURE grammed and powered ON If the LED is not lit check the harness connector to the AFS Pro 700 display Then check the cab power fuses for the display Monitor To function properly the display requires switched power unswitched power and ground a Copyright 2010 2012 CNH Global N Y ALL RIGHTS RESERVED If the LED is lit but is not green contact your Case IH dealer for assistance RAIL12DSP1369BA 8 When the ignition switch is turned OFF there is a short delay before the screen goes blank During this delay the display uses unswitched power to save the current settings and to
207. proaching boundary or obstacle warning occurs e When the vehicle is within 10 m 33 ft of the boundary or obstacle OR e When the vehicle at its current speed is within the alarm look ahead distance of the boundary or obstacle as defined in the Alarm Look Ahead window The alarm look ahead value is specified in seconds the El _ Precision Farming Setup time in which the vehicle with its implement or header at its current speed will close the distance between the A obstacle or boundary and the vehicle The value range is Alarm look ahead Xx Audio from 5 15 s The default value is 5 s Increase the value when working at higher speeds de E 1 2 3 4 crease the value when working at slower speeds The operator should have enough time to comfortably perform whatever actions are required to avoid the obstacle or boundary and continue operating productively Press the Alarm Look Ahead window to access the nu meric keypad Use the keypad to enter a value from 5 15 s RCIL11DSP478BBG 10 Press the Enter button on the keypad to save the value 2 58 2 ICONS AND WINDOWS Boundary Auto Complete E Precision Farming Setup Season Setup The Boundary Auto Complete window determines Jan 01 2012 MN boundary completion behavior when creating a boundary Bound Alarm Audio Obst Alarm Audio with the Rec Boundary window When set to On the boundary being recorded
208. r e Between vehicles of different types combine to tractor and vice versa e Between the display and the desktop software The information exchange occurs by sharing the memory stick between vehicles and or the desktop software To accomplish this the display and the farming applications need a means to differentiate one vehicle from another Each vehicle already has a unique identification number its Product Identification Number PIN or serial number No other vehicle whether a combine a tractor or sprayer has the same PIN or serial number The display transparently identifies the information from each vehicle using its PIN or serial number RCIL11DSP171BBG 1 The Vehicle Name window allows an operator to supply a more user friendly name for the vehicle This vehicle name once created is what appears in the display and the desktop software NOTE The Vehicle Name window can be placed on any Run screen for operator convenience NOTE The vehicle PIN or serial number is entered at soft ware installation on the display On tractors the Vehicle screen Home gt Toolbox gt Vehicle is the only location where the PIN displays On large combines the Com bine screen Home gt Toolbox gt Comb is the only lo cation where the serial number displays When using a generic vehicle the Vehicle Name window is only avail able on the Run screens and there is no identification of the
209. r The example shown has ten windows that are separated by grid lines There are two types of window control windows and re porting windows The operator uses control windows to stop or start a func tion or to select the operational mode for a function for example On Off Manual and Automatic Other control windows allow the operator to input a required pa rameter for example name date time crop type im plement distance and height Reporting windows report status or a measurable value for example speed position fuel consumption seed population yield and area As such reporting windows RCIL11DSP080BBG are seldom user modifiable and resetting a counter is the only permitted user action Window components always include a label 1 and a field 2 A graphic icon 3 is optional The label describes what a window is displaying The icon identifies graphically what the window is displaying The field is a container for information RCIL11DSP081BBG 2 Predefined option windows The shape of the field indicates how it functions A field with a down arrow indicates that a pop up options window with predefined options is available NOTE The options are predefined by the application Press the field to display the pop up options window NOTE The window changes color when selected Lak Label Field Y RAIL12DSP1000BA 3 2 2 2 ICONS AND WINDOWS Th
210. r the setup information provided by OmniSTAR S CAN A_ OV Press the Ok button to save the entered information to RIX Sep the display s memory Us NOTE This completes precision farming setup for RTX Server Address correction Mount Point NOTE RTX correction also uses the Converge Distance Port Number and Position Recall windows that are described as a part of HP XP setup A RAIL12DSP1387BA 33 3 121 3 SETUP Establishing an OmniSTAR subscription The GPS receiver can use HP XP VBS or RTX AFS 372 receiver only subscription services depending on which correction options you purchased with your GPS receiver When you choose HP or XP you should automatically re ceive VBS to use as back up All licenses are activated via satellite by direct communication with the GPS receiver in the vehicle To subscribe to a service and license its use contact OmniSTAR e 1 888 883 8476 USA or Canada e 31 70 31 7 0913 Europe and N Africa e 61 8 9322 5295 Australia and Asia e 27 0 21 404 1861 Africa NOTE Before you make this call the GPS receiver equipped vehicle should be outdoors with a clear view of the sky The display must be turned ON and the correct receiver type must be selected on the GPS Setup screen Home gt Toolbox gt GPS This permits OmniSTAR to immediately enable the receiver You must provide the following e Your billing information e Receiver type
211. ration operational instance that may be present on the Profile Setup screen or the Run screens as required Profile Setup screen The Grower Farm Field Task Crop Type and is Profile Setup Tag windows are the basic building blocks of the Pre cision Farming application and are the primary filters for viewing production results With the exception ofthe Tag window these windows must be populated whenever the Precision Farming application is present With the exception of tasks the information for the win dows can be created on the display and shared between vehicles Task information is vehicle specific and can only be entered on the display Individual applications determine whether the Imple Profile Setup ment Work Condition Operator Operation or Operational Instance windows are required The Im plement window is added to the Profile Setup screen for tractors Implement The Work Condition window is required Field e On combines when the Automatic Crop Settings ACS feature is used e On tractors when the Hitch Notebook screen is used e On planters with the As Applied application for tying the implement to product and layer assignments tt The Operator Operation and Operational Instance windows can be added to the Run screens not the Pro file Setup
212. rational Instance window to access the pop up options window 3 SETUP Press Select to choose an existing operational instance for the current field Any coverage data or as applied data that is associated with the instance is loaded i Work Condition NOTE You do not need to select the first instance for any operation The system automatically supplies the first in stance Plant 1 or Seed 1 for example for all operations that are performed for a crop type in a field Press New to create a new operational instance A new operational instance is created for the current op AB Farms eration Work Condition Dry field NOTE Only one operation and one operational instance are assigned to a task Additional tasks inherit the opera tion and instance from the previous task If no data exists for the current field and operation the instance defaults Task Operation to 1 12 11 07 09 17 22 _ Piant_ Y NOTE A maximum of 10 operational instances can be created for an operation during a season RCIL11DSP485BBG 13 3 20 3 SETUP PRECISION FARMING APPLICATION MAPS AND MAP TOOLS Introduction This chapter explains how to use maps and map tools on the Run screens The Precision Farming application offers two different map types Work maps show the results for the current operation e The swath map shows swath alignment overlap and skip and can be used to align t
213. rded for a specific implement When the implement for which a sequence or work condition has been recorded is deleted you will no longer be able to access that sequence or work condition Deleting implements requires e Selection of Implement in the Data Type window es e Selection of All or specific implements with the Imple ment window This data type is unique to tractors Operator l Delete Data Type Since each operator has a unique ID only delete an op Operator Delete erator if you are sure that you have no future use for the operator Re creating the same operator at a later time re sults in a new operator with a different ID requiring more management effort with the desktop software Deleting operators requires e Selection of Operator in the Data Type window Enter All e Selection of All or specific operators with the Opera tor window Tag Since each tag has a unique ID only delete a tag if you are sure that you have no future use for the tag Re creating the same tag at a later time results in a new tag with a different ID requiring more management effort with the desktop software NOTE Deleting a tag does not affect the data with which it is associated Deleting tags requires e Selection of Tag in the Data Type window e Selection of All or specific tags with the Tag window RCIL11DSP350BBG 38 4 23 4 OPERATION
214. reate or select an operator before changing the prefer rit ito EN J Operator Setu ence windows on this screen Operator Time Format Decimal Symbol _ Point V RCIL11DSP530BBG 3 2 30 2 ICONS AND WINDOWS lf a window is changed before an operator is selected ii NM E Operator Setup a message displays In order to save display settings PET Operator please select a valid operator Press the OK button to acknowledge and clear the mes Not Valid sage if required In order to save display settings please select a valid Operator Every operator must have a unique ID for reporting pur m Operator Setu poses within the software To share a common list of op erators with multiple vehicles create the list on one vehi cle and then transfer the list via the memory stick to the other vehicles This ensures that the operator uses the edit oe e Buen same internal ID across all vehicles Miced Text____Y A maximum of 20 operators can be created NOTE An operator can also be created with the desktop software and then imported Press the Operator window to access the pop up options window If no operators have been created the only option is New to create a new operator besa If New is chosen the alphanumeric keypad displays Use the keypad to create a name Press the Enter button on the keypad to save the name NOTE Be consistent when ente
215. red ON if the HP XP signal is not con verged an information message displays Using VBS Press the OK button to acknowledge and clear the mes sage The message is displayed just once when the system engages When the HP XP signal is converged another information message displays Switching to HP XP This message only displays when the signal switch oc curs Press the OK button to acknowledge and clear the mes sage The actual change to HP XP correction occurs when the message displays The system automatically adjusts for any error between the two methods when the switch occurs EENEN E GPS Location Connection Type Igesi Mena y Logging Interval DGPS Alarm TSecond No DGPS Backup x T J Position Hee ATOM Disable 3 302 mr Convergence Status Converge Distance Vilo102m RCIL11DSP404BBG 6 HP XP Signal Converging RCIL11DSP336BBG 7 HP XP Signal Converged Switching to HP XP RCIL11DSP338BBG 8 3 110 3 SETUP If the HP XP signal is lost but the VBS signal is still avail able another information message displays Switching 7 z to VBS i HP XP Signal Lost This warning only displays when the signal switch occurs Press the OK button to acknowledge and clear the mes sage The system automatically adjusts for any error between the two methods when the switch occurs NOTE At any time an operator can view which me
216. ring operator names par ticularly if the display is used on different vehicle types The software interprets the names PETER Peter and peter as three different operators Your ability to mea sure productivity or summarize production results may be complicated if work tasks are linked to operators that are named inconsistently RCIL11DSP535BBG 6 2 31 2 ICONS AND WINDOWS Thereafter the options are Select Edit Name or 79 Operator Setup New If Select is chosen a pop up options window of current operators displays Press your name in the window Any display preferences associated with this name take effect upon selection The screen updates with the selected operator name If Edit Name is chosen the alphanumeric keypad dis plays Use the keypad to edit the selected operator name Press the Enter button on the keypad to save the name NOTE Do not use Edit Name to replace one operator name with another name Edit Name does not change the unique ID that is assigned for reporting purposes NOTE Be consistent when entering operator names par ticularly if the display is used on different vehicle types The software interprets the names PETER Peter and peter as three different operators Your ability to mea sure productivity or summarize production results may be complicated if work tasks are linked to operators that
217. rk Condition Al Delete RCIL11DSP097BBG 2 2 11 2 ICONS AND WINDOWS HOME SCREEN Introduction When the vehicle ignition switch is turned ON the display loads its startup page and sounds one long beep to indi cate that it is starting AGRICULTURE AFS Pro 700 Monitor ISO 11783 compliant Copyright 2010 2012 CNH Global N Y ALL RIGHTS RESERVED RAIL12DSP1369BA 1 When the installed applications are ready the Run 1 screen displays The Run 1 screen is the default startup page for all applications NOTE The contents and arrangement of information on the Run screens are determined by the operator Place the windows that are most useful for the current operation on the Run 1 screen Press the Back icon on the navigation bar to return to the Home screen a Field Farm RCIL11DSPO99BBG 2 The vehicle application tractor combine or other creates e The Home screen A for the vehicle and other farming applications on the display e The status and warning icon area B for all applications on the display e The left hand area C which may be configurable for some vehicles e The current time and date D may also be shown somewhere on the screen The icons and content of the Home screen as shown in the examples vary with the vehicle 2 ICONS AND WINDOWS Toolbox Diagnostics Combine Info
218. rn the headlights OFF when selecting the daytime setting Turn the head lights ON when selecting the nighttime setting Press anywhere on the bar graph to immediately adjust the backlight to the new level OR Press the right or left arrow button to increase or decrease the backlight in 5 increments The backlight of the display immediately reflects the new setting as changes are made RCIL11DSP118BBG 12 Press the Enter button to save the setting Press the Close x button to exit the window without changing the current setting Current Vehicle NOTE Select the correct vehicle type Vehicle selection chooses the core application for the dis play for example Large Tractors or Medium Tractors The selected vehicle type interacts with other applications and determines setup and calibration requirements Each vehicle type has different Run screens Home screen icons and menus Generic Tractor and Generic Combine applications are available so that the display angua Interface Level can operate on early Case IH vehicles that do not have full English y Press the Current Vehicle window to access the pop up options window Controller Area Network CAN bus systems or in some light Current Vehicle cases on non Case IH equipment wr RCIL11DSP109BBG 13 2 28 2 ICONS AND WINDOWS Press the vehicle type in which the display is installed Refer
219. rning zone See 3 62 for detailed information about field obstacles and obstacle alarm behavior Press the Obstacle Alarm Audio window to access the pop up options window Press Off to disable any audible alarm when approach ing a field obstacle Press On to enable the audible alarm RCIL11DSP477BBG 7 Press the Close x button to exit the window without changing the setting NOTE When the Autoguidance application is in use the Obstacle Alarm Audio window is set to On and cannot be changed Bound Auto Complete On y RCIL11DSP474BBG 8 2 57 2 ICONS AND WINDOWS Alarm Look Ahead EN Precision Farming Setup Season Setup The value in the Alarm Look Ahead window along with fJano1 2012 N a minimum default distance determines when the alarm Bound Alarm Audio Obst Alarm Audio behavior for boundaries and obstacles occurs Alarm Look Ahead The alarm zone is different for forward and reverse oper ation Bound Auto Comp If the vehicle is operating in a forward gear the on approaching boundary or obstacle warning occurs e When the vehicle is within 5 m 16 ft of the boundary or obstacle OR k nisp oe tayout e When the vehicle at its current speed is within the eee alarm look ahead distance of the boundary obstacle as defined in the Alarm Look Ahead window If the vehicle is operating in a reverse gear the ap
220. s Two different swath map windows Swath Map 1 x 4 and Swath Map 2 x 5 are available for the Run screens The windows differ in size but not in function The first number of the map label indicates the number of columns used on the Run screens and the second number indi cates the number of rows Some software allows the operators to place the Swath Map 1 x 4 window in the left hand area When the Swath Map 1 x 4 window is in the left hand area and on a Run screen the left hand area has priority When the Run screen is viewed the Swath Map 1 x 4 window only dis plays in the left hand area When the Swath Map 1 x 4 window is in the left hand area and the Swath Map 2 x 5 window is on a Run screen the Run screen has priority When the Run screen with the larger map is viewed the map only dis plays on the Run screen 3 39 Swath Map 1 x 4 example RCIL11DSP030BBG 1 Swath Map 2 x 5 example YA Farm CPE _ ETT fetes RCIL11DSP031BBG Vehicl lear _ Farm A generic symbol for the vehicle type tractor combine sprayer etc represents the vehicle in the swath map a E The map always offers a zoomed in view of the current position of the vehicle in relation to the two swaths on either side of the vehicle Vehicle position on the swath map is fixed in the center MS Es of the map wind
221. s The Summary Data screens only display in the options window if the Precision Farm ing application is installed on the display RCIL11DSP146BBG 8 RCIL11DSP147BBG 9 CT RCIL11DSP149BBG 10 2 40 2 ICONS AND WINDOWS Number of Windows columns and rows Press the Number of Windows window to change the number of columns and rows on the selected Run screen The number of columns and rows can be different for each Run screen The first number always indicates the number of columns The second number indicates the number of rows NOTE A Run screen has a fixed size Selecting fewer columns and rows increases the size of the windows to fill the screen area Selecting more columns and rows decreases the size of the windows to fill the screen area The pop up options window displays RCIL11DSP151BBG 11 Press the desired setting The layout for the selected Run screen immediately up El Run Layout dates to reflect the selection In this example the Run 3 screen has a two column layout with four rows for placing eight or fewer windows RCIL11DSP153BBG 12 Choose windows Most windows use only one location on a Run screen There are exceptions however For example map win dows require multiple rows and or columns Refer to the appropriate software operating guide to identify windows operar that span multipl
222. s an AFS 162 AFS 252 AFS 262 or AFS 372 receiver or a Trimble AgGPS 252 AgGPS 262 or AG 372 receiver that is enabled for these forms of correction NOTE When RTX correction is in use the RTX Expire Date window identifies a standard modem or standard Satellite subscription with S in the window label The window identifies a fast satellite subscription with F in the window label A message appears once per day when a VBS HP XP or RTX subscription is within 14 days of expiration The message appears only if the technology associated with the subscription is selected on the GPS Setup screen Home gt Toolbox gt GPS NOTE The display must be powered ON within the 14 days prior to the expiration date for the message appear Press the OK button to acknowledge and clear the mes sage aes GPS Status Ea DGPS 6 GPS HDOP GPS Longitude 31 20 M 88 594613 GPS PDOP Bae 30 2 DGPS SNR GPS Heading dB 12 3 HP XP Convrgaence GPS Latitude 40 288640 GPS Altitude 32 8 m HP XP Convergence 0 0 gt Reset HP Expires On VBS Expires On 06 30 2013 3 132 Omnistar ID hAn AAAAnAN RTX S Expires 12 31 2013 CAN Fault Res RAIL12DSP1410BA 17 OmniStar s Subscription OmniStar subscription will expire in nn days RCIL11DSP500BBG 18 3 SETUP A message appears at startup when the VBS HP XP or El Run 1 RTX subscription ha
223. s expired O Omnistar The message appears only if the technology associated Subscription with the subscription is selected on the GPS Setup screen Home gt Toolbox gt GPS When expired the DGPS signal is not available for use expired Press the OK button to acknowledge and clear the mes sage OmniStar HP XP subscription i RCIL11DSP501BBG 19 0 00 0 1 ie OmniStar Subscription OmniStar VBS subscription expired RCIL11DSP502BBG 20 OmniStar Subscription OmniStar RTX subscription expired RAIL12DSP1411BA 21 3 133 RTK Security Expires roy GPS Status am GPS Latitude The RTK Security Expires window reports the expiration Ea DGPS Init 6 40 864734 date for the current RTK subscription GPS HDOP GPS Longitude The information is available regardless of whether the sig GPS PDOP GPS Altitude nal is currently in use or not A message appears once per day when the RTK security subscription is within 14 days y Age of RTK 4 GPS Heading of expiration AER 0 00 s A 357 7 The message appears only if RTK is selected in the A i lag a AD aes ae 10 26 2013 Initializing DGPS Type window NOTE The display must be powered ON within the 14 days prior to the expiration date for the message to be displayed RAIL12DSP1412BA 22 GPRS Status Qe eps GPS Status GPS Latitude The GPRS Status window reports the current status of DGPS
224. t Gat Sa NG Els oat se ea a E 2 12 keNand al eak E ee eae eos a WE eo aN ee ew a de BR es RO Ree Re 2 22 Status and warning icon AA ia it des oxida de hatte betes Baek oe aed eed oe haa eee Ale at 2 18 PRECISION FARMING APPLICATION BUILDING BLOCKGS ccc ccc cea eee eee eens 3 1 Proe Setup Scree ais daria nes 3 1 FROGITON Al WINDOWS bec Sve 5 Soh heen Shahla Bodh di aoe Swat hen See a BRS we eee hha Sao SG 3 15 HMEPOCUICUOM aa Cia ls e e eo eo os e e otter e ula po do tate e AG a eo Ra tal 3 1 PRECISION FARMING APPLICATION FIELD BOUNDARIES OBSTACLES AND MARS a e es dE dad enone 3 46 FICIC DOUNG ANNES a A a as ara ia Gre e da 3 46 EICI AA A A A A ee ee a a 3 74 PICIO OOSTACIOS lt A o a ie e ei adds dde e Mngt Shy a a e a iodo a ke ol 3 62 INTO ra A e a Sed nd ah es a e e Re ad 3 46 PRECISION FARMING APPLICATION GPS AND RESOURCE STATUS 3 125 Constelaton Map SCION ca es AI EA E a Rees 3 135 GPS Receiver SCL CCI sr cae ws bh w ts Suk hide ll tai Di Sok ae ld did whe GAR devas sone tee Gow tacon Sanden dee lia dot duel 3 137 CS DLAI SC OO shine ta ec hc eS ing ta o I ee ee EC eo Ee eee ee io ee ed 3 125 Resource Stats Sree css wince dhs ow auras Ga end oe a Bae e ete ao wn hos wee ee ee BR a RS eee ees 3 138 INTOQUCIO Nc A Bo Ga At OO NA eS Vi ble Ea id Hee ee Heke 3 125 PRECISION FARMING APPLICATION GPS RECEIVER SETUP ccceeeeeeeues 3 79 DGPS Alarm and DGPS Type WINdOWS 2 0 ee
225. ta cng ei ond a decane diego le gO e a Dhara Eae 6 7 TELEMATICS APPLICATION ssi teuwtiwh tbo needed idee ehtakesicenseiteuntiwareao seek deer 8 1 A A O AN 8 1 Text Messages Received screen o 8 8 TOOLBOX T SCREENS ancianos 2 23 DISPIaY SCD SCICCN 2 lt 5 ayiiace 2 died a ddek dunt aie ae naa eet lie e 2 23 Operator SCIU SC CEN e 5 54 twa EA wale a EAS 2 30 Precision Farming Setup SCreen 0 eee eee teen eee een eeenaes 2 55 Run Layout screen Run screen customization 0 0 aana ananena eee een eens 2 3 SDOMWare ACUVALION SChECM acorta ae a Pe ewe Raed eo ita 2 60 Venicle Name WIN IOWA E aos 2 50 oo o A faa A avon ome dicks ances E E E Aa Ah E E tet dg atom ioe le ate 2 23 DATAMANAGEMEN di e e OP 4 1 Delete SrCe aaa e ade ida d a a te ae A ein ee a Aes a ae ee Ts eats 4 8 Filter List screen crop type filter ss aul a e Ei tela te aden bia 4 6 IMPON SCEE sese kea a Seals AA ee hea E AE an eats ated 4 3 Map Management Screen a id de A todas dd 4 26 INTOdUCUO 2 5 lt ah acacia aeem asa air arar T te na E 4 1 DIASGNOSTIO Srs AA ere 5 1 GAN Sla US SGCC alt e E o e a NDS xe 5 3 e A O A O O A 5 4 NESTON Meo CROC sea ara leah ra eds hin a ate ok a AP Wee eat Eo a edo ste 5 2 INTFOQUCION ys cima ral prada ip is win Gog ita olaa ese pec eit a rada wg eM a ate Sr tc Shee ae Sele ws see seca tae 5 1 GENERAL 0 A dna wos eas A detente A dE 1 1 DESKIOD SOWA G a teers end ra A ii a ee 1 8 LDU AY er bee aia a to
226. tary Field Mark button records a single symbol to the map and saves it with the other data Press the button each time a location requires marking 3 74 Rec Obstacle eae ee Boundary KA Field Marks 1 2 Field Marks 3 4 Weed Rock Tile Insect RCIL11DSP068BBG 1 Farm RCIL11DSP282BBG 2 When pressed a latching Field Mark button highlights HEE Ej and remains active until pressed again The button 7y E em Rec Boma records continuous symbols to the map and saves them ae ue with the data as long as the button remains latched Field Marks 1 2 Field Marks 3 4 and warning icon area as a reminder that the button must be unlatched at some appropriate moment Weed Rock P A Field Mark icon displays in the status Farm Field Plank Road E RCIL11DSP282BBG 3 75 3 SETUP Field Mark Setup screen On the Home screen press the Toolbox icon to access 8 e the Toolbox screens yiagnostics Remote Valves NOTE Field marks can also be created with the desktop software and imported o Work Condition Electronic EOR Press the Marks icon on the navigation bar to display the Field Mark Setup Field Mark Setup screen Press the Field Mark 1 window to access the pop up Field Mark Setup options window NOTE The first time the window is selected the only op tion is New Thereafter the options are S
227. te a note the operator must access the keypad and edit or delete the current content Press any Note window to access the alphanumeric keypad Use the keypad to enter edit or delete the note informa tion NOTE A note can contain any mix of characters up to 18 characters long Press the Enter button on the keypad to save the note RCIL11DSP445BBG 3 3 169 3 SETUP Spray Tip The Spray Tip window is required by any vehicle per forming spraying to identify the tip model spray angle and output flow rate for the current operation A spray tip like a tag acts as an electronic note for the grower or operator to save another variable in crop pro duction and to filter production results for that variable The spray tip is linked to the task and only one spray tip may be assigned to a task A maximum of 50 spray tips can be created and a unique ID is assigned to each spray tip NOTE Change the task first and then change the spray tip to ensure that data is retained for the previous and RCIL11DSP444BBG 4 subsequent spray tip When multiple vehicles are used spray tips should be cre ated on one vehicle and then transferred to the other ve hicles via the memory stick This ensures that spray tips are identified by a uniform set of IDs across all vehicles Use the Delete screen to delete spray tips as required Home gt Data Management gt Delete To add edit or crea
228. te a spray tip with the display press BEJ Xtra Notes the Spray Tip window to access the pop up option win HH Spray Tip ANN dow If no tips exist the only option is New Spray Tip Thereafter the options are Select Edit Name and i Xtra Notes There T Use Select to pick a spray tip from a user defined list Use Edit Name to change the name of a spray tip NOTE Do not use Edit Name to create a new spray tip Editing a spray tip does not change the unique identifica tion number assigned for each spray tip Use New to add a spray tip to the current list RCIL11DSP448BBG 6 3 170 3 SETUP Press Select to display a pop up option window of cur MERTE rent spray tips BERNE Press the required spray tip The screen updates with the new spray tip Press Edit Name or New to display the alphanumeric keypad Use the keypad to create or edit a spray tip NOTE A note can contain any mix of characters up to 18 characters long Press the Enter button on the keypad to save the name 3 171 RCIL11DSP452BBG 8 3 SETUP 3 172 4 OPERATION 4 OPERATION DATA MANAGEMENT Introduction This chapter explains e How to import information from another vehicle e How to filter the crop type information for all display and farming software e How to delete information from display memory and the memory stick e Ho
229. te the selected work conditions Press the Yes or No button at the confirmation mes sage ti E Delete Data Type Work Condition Y Delete Crop Type ti Data Type Work Condition Y LLLE Work Condition X Dry Field X Wet Field Delete RCIL11DSP324BBG 19 4 OPERATION ta Mack pt tT Data Type Task is the data type in which most logged data and GPS CTT e Delete data is stored Deleting a task removes all summary data Operation and logged data for the task Farm Task deletion is the recommended method e For recovering memory stick space for the current op Field eration planting spraying harvesting when you no longer need to retain the summary data for the tasks Task e For recovering memory stick space from a previous op eration which has been archived for example tasks used for planting which still reside on the memory stick during harvest season Delete Map e For beginning a new season s work while retaining the RGILIDEPSBBe 20 rower farm field structure E i TE The task data type uses the most windows but the same MONO 10 Confirm Delete processes as the other data types z To delete all tasks from display memory and the memory stick l ADelete the selected records 1 Select Task in the Data Type window 2 Select All in the Operation window the Farm Field and Task windows default to All as a resu
230. th whichever is greater The warn ing behavior for an obstacle is triggered based on the im plement width or header width plus the safety margin The obstacle type selection should be based on the width of the obstacle and how much advance warning the oper ator needs to avoid the obstacle An open obstacle 1 is mapped as a narrow line of GPS coordinates marked by the path that the vehicle travels The open type is designed for marking a long but narrow obstacle a shallow stream gully trench or similar ob stacle A closed obstacle 2 is mapped as a polygon similar to a boundary marked by the path that the vehicle trav els around the obstacle The closed type is designed for marking any large obstacle a pond river tree grove or similar obstacle A point obstacle 3 is mapped as single GPS coordinate marked with the vehicle The point type is designed for marking any small obstacle a rock boulder post or similar obstacle With the vehicle in an appropriate location in the field press the Record button to begin obstacle creation 3 63 Farm Plank Road Yield bu ac Farm RCIL11DSP051BBG 3 The Obstacle Properties window displays to prompt the operator for obstacle properties e Obstacle name e Recording edge e Obstacle type e Obstacle subtype Press the Obstacle Name window to access the al phanumeric keypad The default obstacle name is O
231. thod of correction is in use by checking the GPS Setup screen Home gt Toolbox gt GPS RCIL11DSP340BBG 9 3 111 3 SETUP Converge Distance The Converge Distance window is used with HP XP to reduce the convergence time associated with this technol ogy The setting in this window affects the signal accuracy required for initial convergence the system continues to converge to the full signal accuracy of HP XP technology but the system becomes available for use earlier Converge distance is the distance that HP XP uses to es tablish the location of a point while converging The sys tem default is 0 102 m 4 0 in Increasing the distance allows the system to be ready for use earlier but with less accuracy For example increasing the converge distance to 0 5 m 20 in or 1 m 39 in allows the system to be ready for use much earlier but with less accuracy as the distance is increased If the planned work does not require the highest level of accuracy increase the converge distance so that the sys tem will be available for use earlier If the planned work does require great accuracy set the Converge Distance window to the default value of 0 102 m 4 in In both cases the system will ultimately converge to the full ac curacy of HP XP technology NOTE Do not confuse the converge distance with the accuracy of the technology Press the Converge Distance window to access the nu meric k
232. thout changing the current setting ATIL 5 Operator Setup Input Error Duplicate name exists Enter another name RCIL11DSP536BBG 10 MONO e E Operator Setu diii him RCIL11DSP580BBG 11 Hones RS RCIL11DSP581BBG 12 2 33 2 ICONS AND WINDOWS Time Format Press the Time Format window to access the pop up options window Press your preference to change the setting Press the Close X button to exit without changing the current setting Display Volume Press the Display Volume window to access the pop up bar graph window This bar graph sets the volume for any warning or message beeps sounded on the display Press anywhere on the bar graph to immediately adjust the volume to the new level OR Press the right or left arrow to increase or decrease the volume level in 5 increments The speaker beeps at the new volume level as each new setting is selected Press the Enter button to save the change Press the Close X button to exit without changing the current setting Display Mode Press the Display Mode window to choose one of four display modes from the pop up options window e Icon lcon e Mixed Icon e Mixed Text e Text Text see the illustrations on the next page to understand the differences among the four modes before making a choice NOTE Every window does not change appearance for
233. to 9 pin RS232 a USB to 9 pin RS232 etc from a local electronics supplier RCPH11DSP027BBG 4 6 PRINTER APPLICATION Print to a printer To print any screen when Printer is selected in the EEPE a o Printing Mode window Operator lt pau gt Navigate to the desired screen Units Display Mode Mixed Text Y 2 Press and hold the screen s icon in the navigation bar for approximately 2 s Grid Lines Date Format If the windows on the screen have printable contents a confirming message displays Printing requested Are i you sure Decimal Symbol Point Y 3 Press the Yes button to proceed with printing and clear the message Press the No button to cancel the request and clear the message RCIL11DSP525BBG 1 A text page is created by the printer If the screen contains no printable content a different message displays No printable data in the current screen Press the OK button to clear the message 6 PRINTER APPLICATION 6 8 7 THIRD PARTY SYSTEMS 7 THIRD PARTY SYSTEMS Introduction Four popular product control systems can be directly interfaced to the AFS Pro 700 display Rawson Accu Rate system Raven variable rate system HARDI control system e Flexi Coil control system Rawson Accu Rate system A Rawson Accu Rate system can apply seed liquid granular bulk seed or other products with the AFS Pro 700 disp
234. to prompt LJ wh Run 4 the operator for boundary properties FERTA Rec Boundary e Boundary name e Recording edge e Boundary type Boundary Name e Boundary subtype inner boundaries only Recording Edge e Impassable inner boundaries only pounce Dee Boundary Subtype Impassable RCIL11DSP052BBG 3 Press the Boundary Name window to access the al phanumeric keypad RCIL11DSP052BBG 4 3 47 3 SETUP The default boundary name is Boundary XX where XX El is a number that increments each time another boundary H is created in the current field If desired type a new name for the boundary Press the Enter button to save the name Press the Close button to exit without saving The operator must indicate a horizontal position based on the implement width or header width that should be used to record the boundary left 1 center 2 or right 3 Ji are RCIL11DSP028BBG 6 EE DO E a a a M l M RCIL11DSP027BBG 7 3 48 Press the Recording Edge window Press Left to select the outermost left edge of the imple ment or header as the distance from the GPS receiver to record the boundary Press Center to select the centerline of the vehicle in tersecting the GPS receiver as the location to record the boundary Press Right to select the outermost right edge of the implement or header as the distance from the GPS re
235. uage change on the Display Setup screen changes language for all applications on the display If the selected language is not available for an application the application will use its default language Press the Language window to display the pop up op A tions window for available languages m e Press the desired language to change the setting Polski nvenska Press the Close X button to exit the window without changing the current setting Fran ais RCIL11DSP017BBG 8 If a new language is selected a message displays This change requires the display to perform a full reset To continue select Yes or select No to cancel New Language Press the Yes button to load the new language into Selected memory Press the No button to cancel the request The new language remains active until it is changed RCIL11DSP115BBG 9 2 26 2 ICONS AND WINDOWS Interface Level Two interface levels are available Basic and Ad vanced Choose Advanced if you intend to record the results of your farming operations for analysis with the desktop soft ware This includes summary data as applied data and harvest results yield and moisture Choose Basic if you do not intend to record production results NOTE To enable mapping and data logging to the mem ory stick for analysis with the desktop software set the Interface Level
236. upport for anac import Updated WAAS satell Your source for the latest ephemeris files almanacs and other data to help you get the most from your system RCPH11DSP001FBG 1 Planning software takes the guesswork out of satellite availability for any given work period This software is a free download available in the Planning Software section of www trimble com The path to the downloads on www trimble com is Trimble Home gt Products amp Solutions gt Surveying gt Office Software gt Planning Software gt Download Use your web browser to download the software 1 to your desktop computer The file is approximately 23 MB Download time varies from 1 20 min depending on your network connection At the same location follow the Trimble GPS Data Resources link 2 to download the Almanac file The Almanac file tracks GPS satellite locations around the world and is updated daily The file is identified as GPS GLONASS almanac in Trimble Planning file format Download time for the Almanac file is seconds NOTE Bookmark this location on the web site you will need to retrieve a current Almanac file frequently 3 139 3 SETUP Use standard Windows techniques to install the software on your desktop computer When installation is complete launch the software from Start gt Trimble Office gt Utili ties gt Planning RCPH11DSP001ABG 2 The main window displays 5 Planning Default 6 26 2012 alma
237. valid 0 Expired OK subscription Key _ Y e RAIL12DSP1342BA 15 3 99 3 SETUP A black X displays beside the key if it is not valid If the key does not match the key provided by the base station operator press the Key 1 window to correct it Otherwise contact the base station operator for the correct key el f Active X Invalid ca OK subscription Key Oper Layout Impl Vehicle RAIL12DSP1343BA 16 A red exclamation point displays beside a GPS Setu the key if it is expired Contact the base d RTK Security station operator for the current key key H 7 nnnnnnnnnnnnnnnn Key 5 f Active X Invalid Expired y OK Subscription Key Y Disp Oper Layout impi Vehicle RAIL12DSP1344BA 17 Use the remaining windows in the RTK Security pop up er GPS Setup window to enter subscription keys for up to four additional RTK Security base stations Key 1 lt 7 nnnnnnnnnnnnnnnn Key 2 Key 4 Ky fs Active X Invalid Y Expired OK Subscription Key Back Disp Oper Layout Impl Vehicle aps P RAIL12DSP1345BA 18 3 100 3 SETUP The operator can view the expiration date for each sub scription key in the RTK Security pop up window Press the window at the bottom of the RTK Security win Key 4 a nnnnnnnnnnnnnnnn dow to access the pop up options window r Select Expiration Date Subscript
238. vehicle by its PIN or serial number NOTE See 4 1 for more information on sharing informa tion between vehicles 2 50 2 ICONS AND WINDOWS Vehicle screen tractor examples On the Home screen press the Toolbox icon to access the Toolbox screens piagnostics Remote Valves Data Management Calibration Electronic EOR RCIL11DSP108BBG 2 Press the Vehicle icon on the navigation bar to access Dan the Vehicle screen Vehicle Name An example PIN is shown This is a reporting window that the operator cannot select or modify NOTE Contact your Case IH dealer if this window is blank or if it contains the wrong information RCIL11DSP070BBG 3 The software creates a default name for the vehicle ENNEN El Vehicle Name Press the Vehicle Name window to change the name Vehi wi TRAC1 Z Press Edit Name to access the alphanumeric keypad Vehicle m RCIL11DSP172BBG 4 2 51 2 ICONS AND WINDOWS Use the keypad to enter a new name for the vehicle Press the Enter button on the keypad to save the name IJKLMNOP QRSTUVWX YZ axa A On some tractor series the Vehicle screen contains the model and PIN windows but the windows are both report ing windows that the operator cannot select or modify The tractors are identified by PIN or serial number and the display does communicate with the vehicle controllers on the Controller Area Network CAN
239. ver must be carefully aligned to the obstacle for the most effective result RCIL11DSP269BBG 21 3 69 Pause button o ae PE Rec Boundary The Pause button is useful for any section of a closed 1 MAN xX 720 10 or open obstacle that can be defined by a straight line segment Any distance traveled while obstacle recording is paused is automatically joined by a straight line when recording is resumed Using the pause feature an op erator can record segments of an obstacle and allow the software to supply any required straight lines between the segments Whenever obstacle recording is paused be sell the Recording Obstacle icon flashes in the j MTA status and warning icon area as a reminder i to the operator that recording has been paused The Rec Obstacle window also updates to reflect that recording is paused Rec Boundary Back Runi Run2 Run3 RCIL11DSP065BBG 23 3 70 Cancel button Press the Cancel button to exit obstacle recording at any time This action deletes the recording in progress from display memory and the memory stick A confirming message displays immediately after the button is pressed Are you sure you want to delete the obstacle that is being recorded Press the Yes button to cancel recording and delete the obstacle in progress The Recording Obstacle icon dis appears Press the No button to continue the rec
240. w Time Zone GMT 06 00 Central Time US amp Canada zji Iono Map lono Information Location WN 32 7828 W 92 4055 Om Copynght 2012 Trimble Navigation Ltd Version 2 1 4527 Satellite System s GPS Gionass Galileo Compass QZ5S Local Time 8 30 2012 4 00 AM 8 31 2012 4 00 AM UTC 5 Cutoff Time Zone GMT 06 00 Central Time US amp Canada RAIL12DSP1038FA 1 Global Navigation Satellite System GNSS Planning Online An online planning tool is available for operators who have a reliable Internet connection Because the information is online it is always current without requiring an Almanac file To access the online planning tool point your web browser to www trimble com GNSSPlanningOnline The required settings are similar to those of the downloadable planning software Click the Settings button on the left hand side of the screen and input the following information e Coordinates for the location of your farm use the Pick button to search for the nearest city e Height elevation cutoff and obstructions e The date on which you intend to work e The time interval for which you want to view satellite information e Your time zone Click the Apply button to save your settings 3 148 3 SETUP a Copynght 2012 Trimble Navigation Ltd Ed 7 G10 l i G19 A 628 Y Y Y i vi EA c QBs vgs w_ Qe Per v Bez Visibility 4 Veces VM Bo Y Pez Sky Plot y Y
241. w to manage individual map items With the AFS AFS Pro 700 displays information can be shared e Between applications Between vehicles of the same type tractor to tractor e Between vehicles of different types combine to tractor and vice versa e Between the display and the desktop software The information exchange occurs by sharing the memory stick between vehicles and or the desktop software To accomplish this the display and farming software needs a way to differentiate one vehicle from another Each vehicle already has a unique identification number its product identification number PIN or serial number No other vehicle whether it is a combine a tractor or a sprayer has the same PIN or serial number The display transparently identifies the information from each vehicle using its PIN or serial number RCIL11DSP171BBG 1 The Vehicle Name window in the Toolbox screens or on a Run screen allows the operator to supply a more friendly proxy name for the vehicle This proxy vehicle name once created is what appears in the display and the desktop software NOTE The vehicle PIN or serial number is entered dur ing software installation on the display On tractors the Vehicle screen Home gt Toolbox gt Vehicle is the only location where the PIN displays On combines the Com bine screen Home gt Toolbox gt Comb is the only loca tion where the serial number displays
242. w to select it The screen updates with your selection in the Farm win dow and with the Field window set to All Press the Delete button to delete all fields for the se lected farm The confirmation message displays RCIL11DSP320BBG 14 4 OPERATION To limit the selection to specific fields within a farm press the Field window to display the pop up options window Press the box IX next to the field name to select or de select it depending on its current state An X indicates that the box is selected Press the None button to deselect all fields Press the All button to select all fields When you are satisfied with the selection press the En ter button to save the setting If more than one but less than all fields are selected the Field window displays the total items selected If only one field is selected the window displays the Field s RCIL11DSP512BBG 15 name Back import Filter Press the Delete button to delete the selection The con firmation message displays 4 OPERATION Work condition pS Data Type Work conditions are a special case pt e On tractors a work condition is linked to the implement e On combines a work condition is linked to the crop type TOS AA When Work Condition is selected in the Data Type win dow the Crop Type window or Implement window must be populated
243. ween the current ve hicle location and the start of the boundary 3 54 3 Rec Obstacle Recording e RCIL11DSP058BBG 21 RCIL11DSP458BBG 22 Pause button Rec Obstacle Recording The Pause button is useful for any field or field section O E xX that can be defined by straight line segments Any dis tance traveled while boundary recording is paused is au tomatically joined by a straight line when recording is re sumed Using the pause feature an operator can record only the corners of the field and allow the software to draw straight line boundary segments between the corners RCIL11DSP058BBG 23 Whenever boundary recording is paused MO el eel ee status and warning icon area as a reminder to the operator that recording has been paused The Rec Boundary window also updates to reflect that recording is paused RCIL11DSP067BBG 24 3 55 3 SETUP The illustration shows the recording of a field with straight borders using the Pause button With the vehicle lo cated in the upper left hand corner of the field the op erator starts recording and then immediately pauses until the vehicle arrives at the next corner of the field NOTE A point is immediately recorded when the Record button is pressed after recording has been paused At the next corner the operator presses the Record but ton and then the Pause button recording is paused unti
244. window to display the pop up options Connection Type window CAN A N DGPS Alarm Press the Close X button to exit the window without changing settings VBS correction is provided with the HP XP subscription WAAS EGNOS requires no subscription Autonomous is also available but it is not DGPS NOTE To add RTK operation to your existing DGPS sys tem contact your Case IH dealer RCIL11DSP403BBG 5 3 109 3 SETUP DGPS Backup automatic VBS backup To overcome the long convergence time or sometimes de graded signal associated with HP XP correction precision farming systems offer VBS correction as backup to HP XP enabled receivers While HP XP is converging VBS correction is used If the HP XP signal degrades VBS correction is used To enable VBS backup press the DGPS Backup win dow The pop up options window displays Press VBS to enable backup Press None to turn backup Off Press the Close X button to exit the window without changing settings When the Precision Farming application is used no messages appear when the switch between VBS and HP XP occurs The GPS Status window reports which technology is in use When the Autoguidance application is used messages inform the operator of the correction being used The GPS Status window also reports which technology is in use When autoguidance is engaged for the first time since the display was powe
245. wo memory sticks 4 37 RAIL12DSP1042AA 1 4 OPERATION 4 38 9 DIAGNOSTICS 9 DIAGNOSTICS Introduction 33 te The Version CAN Status and Fault Archive screens are common to all applications on the AFS Pro 700 display The information on these screens may be requested by Case IH dealer personnel to resolve a problem with how your equipment is performing NOTE The Resource Status GPS Status and GPS Receiver screens are discussed as a part of the Precision Farming application See 3 125 This chapter explains e How to check software versions e How to check controller status e How to investigate fault codes On the Home screen press the Diagnostics icon to access the Diagnostics screens a Toolbox Diagnostics amote Valves Work Condition Data Management Calibration Electronic EOR RCIL11DSP108BBG 1 5 DIAGNOSTICS Version screen Press the Version icon in the navigation bar to display the Version screen The Version screen lists the eight digit part number 1 the software name 2 and the revision level 3 for every application that is currently running on the display NOTE Press the arrows on the scroll bar to page down and page up on the screen The list includes applications that are required by the dis play applications that are vehicle specific and farming applications Only applications
246. y present when the receiver is enabled for HP XP or RTX correction The GPS Status screen contains multiple reporting windows for e GPS receiver and signal state e Vehicle position and heading e Subscription status if applicable e Security status if applicable The windows are grouped on the GPS Status screen for easy operator access Most windows can be added to any Run screen for operator convenience with subscription status RTK security status GPRS status and the con vergence Reset button as the exceptions Press the GPS icon on the navigation bar to display the GPS Status screen Toolbox Diagnostics A Y Performance Work Condition Data Management Calibration Electronic EOR ops GPS Status GPS Latitude Ea DGPS 6 40 288640 GPS HDOP GPS Longitude 1 20 GPS PDOP GPS Altitude _ DGPS SNR E HP XP A HP XP Convergence HP Expires On VBS Expires On 06 30 2013 Y 06 30 2013 88 594613 RAIL12DSP1407BA 1 3 125 3 SETUP Age of RTK Placement label Age of RTK Age of RTK The Age of RTK window reports the time interval since the last message from the base station to the GPS re RTK 1 9 5 S ceiver The value is in seconds x A typical value should be approximately 1 s Any value over 3 s indicates a problem with reception of the signal from the base station This may be caused by e An obstruction between the base station and the vehi
247. ypad to enter a new name for the vehicle Press the Enter button on the keypad to save the name Generic vehicles When the display is on a generic vehicle generic tractor generic combine or generic sprayer the Vehicle Name window is only available on the Run screens The Ve hicle Name window is not a part of the default layout and can be added by an operator when customizing the Run screens if desired When analyzing harvesting product application or other farming operation results from generic vehicles with the desktop software the ability to differentiate results from different vehicles of the same type depends on the vehicle in question Combines and cotton pickers using the generic vehicle application differentiate results by using the display PIN instead of the vehicle PIN The generic tractor and generic sprayer do not differenti ate results by the vehicle PIN or the display PIN and the desktop software cannot compare results from different vehicles of the same type NOTE Planters communicate with the display on the CAN bus The planter s PIN is among the information that is communicated Even when used with generic tractor soft ware each planter s product application results can be distinguished by the specific planter on the desktop soft ware 2 54 Camhine Satin Vehicle Name A B C D E F G H LUJKLMNOP a LE TT Vehicle Name RCIL11DSP174BBG 11 2 IC

AFS Pro 700 User Manual v28

Contents

Download Pdf Manuals

Related Search

Related Contents