CL-3684 Wireless Digital Video Doorbell USER`S MANUAL
Contents
1. Ni MH1 2V 800mAh Power Consumption 450mA Max Operating Temperature 10 40 Operating Humidity 0 85 RH Weight 110g Size WXHXD Handset 165 50 27mm Charger 79 77 42mm No of outdoor phones supported Max 4 Item Detail Technical Specification 20 Technical Specification Outdoor phone Transmit Frequency Range 2 400GHz 2 4835GHz Date Rate 2 0Mbps Transmitting Power 19dBm TYP Modulation Type GFSK FSK Transmitting Distance Outdoor 200m Indoor 50m Image Sensor Type 1 4 Color CMOS Image Sensor Effective Pixels H 320 V 240 Image Processing Motion JPEG Image Resolution Frame Rate H 320 V 240 25fps White Balance Auto Lens 4 9mm F2 8 Viewing Angle Diagonal 50 Minimum Illumination 1 LUX without LED illumination LED 6 LEDs Power Requirement 9 12V DC 5 2 LR14 C 1 5V batteries Power Consumption 500mA Max cells 400mA Max 12V DC Operating Temperature 30 40 Operating Humidity 0 85 RH Weight 166g Size WXHXD 185 68 50mm Item Detail 19 Supports up to 4 outdoor units 2 4 320x240 QVGA LCD display Video resolution 320 x 240 with 25pics per second Wide angle lens and LED for night vision Long standby doorbell battery up to 2 years or connect with DC 9 12V Water proof outdoor station Ip55 Microphone and speakerphone Brightness and talk volume are adjustab2. slide the cover up until it snaps in place Reversing the orientation may damage the handset The batteries need to be replaced if they do not recover their full storage capacities after recharging When replacing the batteries always use good quality Ni MH re chargeable batteries Never use other batteries or conventional alkaline batteries Notes Installing Batteries Insert new batteries as indicated matching correct polarity Chapter2 Volume Chapter3 Brightness This function allows you to adjust the volume 9 levels are adjustable during a call 1 Press beneath to display the main menu items 2 Press or to choose then press beneath 3 Press or to select the volume that you like Each time you press or the handset sounds with the selected volume 4 Press beneath to save the settings and return to the previous menu Menu Up Down Select Left Right Left Right Back Menu Description This function allows you to adjust the light level 9 levels are adjustable 1 Press beneath to display the main menu items 4 Press beneath to save the settings and return to the previous menu 2 Press or to choose then press beneath 3 Press or to select the light level that you like Each time you press or the handset displays with the selected light level Menu Back Up Down Select Left Right Left Right Note Also you can use or k
3. CL 3684 Wireless Digital Video Doorbell USER S MANUAL 3 Congratulations Safety Precautions Prior To Use on purchasing our high quality product Please read the manual carefully before installing your system and follow all of the directions to ensure proper installation To reduce the risk of electrical shock and injury please follow these basic safety precautions before using the product 1 Carefully read and observe the instructions in this manual 2 Follow all warnings marked on the unit 3 Must set the time and the date when replace batteries 3 Unplug this product from the wall outlet before cleaning then use a damp cloth to wipe Do not use liquid or aerosol cleaners 4 Do not place objects on the line cord that may cause damage 5 Do not place the Outdoor phone near the metal 6 Pay attention to the polarity of the batteries insert the rechargeable batteries in accordance with polarity symbols this instruction is found in the installing batteries section 7 Keep out of the reach of children 8 Use only in the described manner 9 Stop using if it becomes damaged 1 Design and specifications are subject to change without notice Indoor phone Receiving Frequency Range 2 400GHz 2 4835GHz Monitor 2 4 Color LCD Date Rate 2 0Mbps Receiving Sensitivity 90dBm Demodulation Type GFSK FSK Resolution 320 240 RGB Transmitting Power 19dBm TYP Power Requirement 3
4. Power End key Accept key Unlock key Microphone Antenna Locking Switch Speaker Battery compartment cover Charging pins Antenna Chapter 4 Key Tone Every time you press a key your handset acknowledges it with a key tone You can disable the key tones for a silent use In certain error conditions a warning tone will sound when an incorrect key is pressed 1 Press beneath to display the main menu items 2 Press or to choose then press beneath 3 Press or to choose or to enable or disable the function 4 Press beneath to save the settings and return to the previous menu Menu Up Down Select Up Down On Off Select Chapter 5 Snap Setting This function allows you to set auto snap or not If the is selected the handset will take pictures automatically during the conversation or the monitoring 1 Press beneath to display the main menu items 2 Press Up or Down to choose then press beneath 3 Press or to choose or to enable or disable the function 4 Press beneath to save the settings and return to the previous menu Auto Snap On Menu Select Up Down On Off Select Menu Description continued 16 Note Also you can use key to take photos manually Snap 15 6 The rechargeable Ni MH batteries AAA size come with your phone Install the batteries before use 1 2V 800mAh 1 Indoor phone 2 3 To replace the battery cover
5. ey to adjust the volume in the standby mode Left Right Note Also you can use or key to adjust the light level in the standby mode Up Down Outdoor phone 1 Install two C size batteries not supplied into the battery 2 Drill four screws to fix the battery up compartment cover 7 Important Note YOU SHOULD FULLY CHARGE THE HANDSET 15 Before initial operation for about hours To charge the handset you should place it on the charger Charging Handset 14 Chapter 1 Date amp Time 1 Press beneath to display the main menu items 2 Press or to choose then press beneath 3 If you want to set the time you can press or to choose the or the and press the or to adjust 4 If you want to select the date you can press or to choose the or the or the and press the or to adjust 5 Press beneath to return to the previous menu Menu Up Down Select Left Right Hour Minute Up Down Left Right Year Month Date Up Down Back Menu Description continued Notes The time format is 24 hour format and the date format is YY MM DD The must be set beforehand to ensure that the time displayed on the monitoring pictures are correct When you replace batteries you must set the time and the date again The setting order is Date amp Time Date amp Time Hour Minute Year Month Date Installation Instruction Indo
6. ion starts 3 Press to end the conversation indoor Notes The conversation can be up to 2 minutes After 2 minutes the line will be disconnected automatically The monitor process can be up to 5 minutes After 5 minutes the indoor phone will quit monitor mode automatically Diagram 9 12 Operations Monitor About the monitor function the LCD will automatically display the corresponding menu according to the registered Outdoor phones 1 In the standby mode press 2 When registers one Outdoor phone the LCD will display 1 Outdoor phone 2 When registers two or more Outdoor phones the LCD will display 1 2 Monitor Pictures below and you can press Up Down beneath or to choose the monitor which you need then press beneath Mon Select Note Both the batteries and the power supply are available but not to use them at the same To support some special functions like monitoring backlight on the call button and unlocking please connect the power supply Outdoor Phone 9 12V The maximum output current can be 1A DC Power 9 12V 9 12V For normal close lock DC Power 9 12V For normal open lock The maximum output current can be 1A Outdoor Phone Connection Mode 1 Connection Mode 2 Lock _ _ DC Power for Lock Lock _ _ DC Power for Lock To turn the indoor phone on press To turn the i
7. le Remote door opening Optional DIY installation to save high labor cost Crystal sound quality Transmitting distance with up to 200m range out of doors Transmitting distance with up to 50m range indoors Introduction 2 Once you have unpacked your product make sure that all the parts shown below are available If any pieces are missing or broken please promptly call your dealer Adapter 7 5V 300mA 3 AAA Ni MH batteries Outdoor phone rear cover Rain Cover User s Manual Unpacking Screws 3 Indoor phone Handset Indoor phone Charger Outdoor phone Engineering Mode 1 Press and hold the and beneath at the same time about 5 seconds in standby mode then the display will show as follow 2 After 5 seconds it will exit automatically Menu Registration Cleared 1 press and hold the and beneath at the same time about 5 seconds in standby mode then the display will show as follow 2 Press or to select the Outdoor phone 3 Press or to select the unlock time 1 25 are selectable then press the soft key to confirm the display will show 4 After 5 seconds it will exit automatically Menu Left Right Up Down Right SAVE OK Delete the Usege Mode Change the Unlock Time 18 Unlock Time 1 5 S CL 3684 Wireless Digital Video Doorbell USER S MANUAL Layout Camera LED light Microphone Speaker Call button with name tag o
8. n it Sensor light Outdoor Phone 4 17 Chapter 7 Default Setting Note If you reset the handset to the factory default all of the settings will return to the factory default The pictures will store in this menu you can save or delete them On the of 1 Press beneath to display the main menu items 2 Press or to choose then press beneath 3 Press or to browse pictures 4 If you want to delete the current pictures use or to choose press the beneath The display will show Press beneath to confirm After a beep the LCD shows the next picture 5 Press beneath to return to the previous menu Menu Up Down Select Left Right Left Right Delete Del Delete Yes Back upper left the picture will display the corresponding Outdoor phone s number Chapter 6 Snap Show This function allows you to reset the handset settings to the factory default 1 Press beneath to display the main menu items 2 Press or to choose then press beneath 3 Press or to choose or to enable or disable the function 4 Press beneath to save the settings and return to the previous menu After resetting the handset will return to standby mode Menu Up Down Select Up Down YES NO Select Result Menu Description continued 5 Indoor Phone Indoor Charger Charge pins Left Soft key Right Soft key Manual Snap LCD display Navigation key
9. ndoor phone off press Turning On Off First press the button of the then hold the key on the back of the Outdoor phone until the LED light blinks Second press on the Indoor phone then select the menu Once a prompt tone is heard the has been registered to the successfully If the registration the regis ration was unsuccessful turn off the and remove the batteries from the before you hold the key Then turn on the re install the batteries and try again Call Register Register Register Outdoor phone beneath Outdoor phone Indoor phone twice prompts tones is heard t Indoor phone Outdoor phone Outdoor phone Menu Indoor phone again s Register Register Button Call button with name tag on it 10 Operations 11 Operations Register Continued The Indoor phone can support up to 4 Outdoor phones 1 When you have registered one Outdoor phone the register interface will display as follow 2 When you have registered 4 Outdoor phones the register interface will display as follow
10. or phone Connect the modular end of the AC power adapter to the power jack of the charger then plug the AC adapter into a standard AC wall outlet Outdoor phone 1 Choose a proper location for the outdoor phone Be sure to consider the average height of visitors 2 Align the rain cover and screws with the holes in the wall 3 Install the outdoor phone into the rain cover Please refer to the picture 3 below 4 Drill a screw to fix and finish the installation To AC wall outlet Align 1 2 3 4 8 Away from electrical appliances such as a TV personal computer or another cordless phone In a HIGH and CENTRAL location with no obstructions such as walls microwave oven and WIFI Slide the antenna locking switch to unlocking position the receiver antenna will pop up to receive better signal Notes 13 In the evening when someone presses the button on the Outdoor phone all the LED lights will light on Call Light Sensor Unlocking During a conversation to unlock the door press the Outdoor phone on Operations Calling Indoor phone In standby mode press the button on the Outdoor phone The corresponding indoor phone rings and the image of the visitor appears on the LCD of the indoor phone Call 1 If the master does not want to answer press to cancel the ringer and the video phone 2 After the master press the will stop ringing Then the conversat
Download Pdf Manuals
Related Search